COMPRESSED AIR SYSTEMS - Nessco · PDF fileCOMPRESSED AIR SYSTEMS 2014 EDITION Compressor,...

COMPRESSED AIR SYSTEMS

www.nesscopressure.com.au

2014 EDITION

Compressor, filtration and airline solutions, brought to you by the compressed air equipment specialists.

The information provided in this catalogue is provided for general information purposes only. The information is not warranted to be accurate, up-to-date, complete or definitive.

Subject to applicable laws, Nessco Pressure Systems (NPS) will not accept any liability for any loss or damage, including consequential loss, which results from the access or use of this catalogue and its contents, including reliance upon the information. NPS reserves the right to change any of the goods, services, policies and prices referred to in this catalogue at any time without notice.

Since the use of this information and the conditions in which these products are used beyond the control of NPS, a user must determine whether the products are suitable for the purpose for which they are to be used, and is responsible for the safe use of the products.

Some products may not be stocked. Unless otherwise specified by the customer when ordering products, NPS reserves the right to substitute unavailable products or brands with the nearest alternative.

To the extent permitted by law, any liability which may be incurred by NPS as a result of the use of or failure of a product is limited at our discretion to the repair or replacement of the product, and NPS will not be liable for any economic loss, loss of profits, indirect, special or consequential damages (including in the case of negligence).

DISTRIBUTED BY

NESSCO PRESSURE SYSTEMS274 Welshpool Road, Welshpool 6106 Perth, WAPhone: 08 9333 4999 Fax: 08 9333 4900 Email: [email protected]


www.nesscopressure.com.au (08) 9333 4999 [email protected]

CONTENTS

5 INFINITY COMPRESSORS

33 INFINITY FILTRATION

101 INDEX

23 INFINITY DRYERS & RECEIVERS

55 INFINITY PIPE SYSTEMS

83 INFINITY AIRLINE ACCESSORIES


ABOUT US

About UsNessco Pressure Systems (NPS) is the new name given to the Nessco Compressed Air Division, part of the wider Nessco Group. With over 13 years experience in delivering compressed air systems of the highest quality and standard, NPS provide their customers with expert advice and service. The team is fully equipped for all makes and models of air compressor systems and high pressure equipment of various sizes and configurations providing servicing, repairs and replacement options.

When you choose Nessco Pressure Systems, you can be confident you are choosing a company who take the time to offer the full service. Our staff will start with an initial consult with the client resulting in a system design based on maximized energy saving and optimal flow pressure performance. This is followed by the supply and full installation of the product as well as after sales support including post installation audits and efficiency testing.

NPS supply and service screw compressors, air preperation equipement, high pressure products and airline systems. We provide a turn key solution to each customer’s requirements through consultancy, system design, sales and installation.

Our reputation as a trusted manufacturer and installer of pressure systems has seen NPS work not only with local Perth companies but also with multinational corporations.

NPS has a strong presence in a number of industries within WA. These industries include:

3 Fabrication 3Manufacturing 3Mining 3 Oil and gas 3 Kitchen and cabinet making 3 Automotive 3Medical 3 Food and beverage 3 Construction 3 Fishing 3 Agriculture and viticulture 3 Chemical processing

Contact usFor more information on Nessco Pressure Systems, contact us today and talk to one of our representatives

By Phone: 08 9333 4999 Monday - Friday: 7AM - 5PM Saturday: 8AM - 12:30PM By Fax: 08 9333 4900 By email: [email protected] Or visit our website at www.nesscopressure.com.au


ABOUT US

Peace of Mind ServiceAt NPS, we offer a complete service - from initial consultation, through to post installation audits, efficiency testing and support. We take the time to learn about your business in order to provide you with the best advice possible. Our factory trained service technicians have over 30 years experience in the WA compressor and high pressure industry, and have experience with all makes and models including oil flooded screw and piston compressors, oil free piston compressors, scroll and water cooled screw compressors and high pressure units.

ReliabilityNPS staff are strategically placed to offer a speed of response unrivaled within our industry. Our approach to service is simple; we strive for ultimate customer satisfaction, achieved through superior workmanship, dedication, honest communication and guaranteed same day response. NPS has a team of dedicated on-road fully certified factory trained service technicians, servicing right across Perth and WA, 24 hours a day, seven days a week.

Energy EfficiencyNPS can tailor a complete system design based on maximised energy savings, with optimal flow/pressure performance. The high degree of sealing and the fine tolerances used in our compression elements guarantee even in small power ranges:

3 Greater yield 3 High efficiency 3 Long life and reliability 3 Lasting performance

NPS Green InitiativeNessco Pressure Systems are committed to providing companies with environmentally sound equipment at an affordable cost. With the impact of increased electricity prices and the Carbon Tax, NPS will work closely with your business to ensure the highest sustainability and resource efficiency is upheld. Be proud, be smart and ‘Go Green’ with Nessco Pressure Systems today

Contact an NPS representative to find our more about our green initiative.

Breathing Air TestDid you know that it is a legal requirement to have your breathing air system tested on a regular basis? NPS are certified to conduct air testing to ensure the quality of breathing air is in line with industry standards.

Respiratory protection should comply with AS/NZS 1716 Respiratory protective devices, and used in accordance with AS/NZS 1715 Selection, use and maintenance of respiratory protective devices.


NPS WebsiteTo view our complete range of products and services, and to download our most recent catalogues and specials, visit our website now at www.nesscopressure.com.au.

NPS BrochuresFeaturing our entire product range, check out our Compressor, High Pressure, Airline and Service brochures.

Quarterly SpecialsLook out for our Specials flyer,

published every quarter.

Our Specials flyers contain limited special offers on both old and new compressors, high pressure

and airline products, as well as information on our servicing packages.

E-newsletterSubscribe to our e-newsletter and receive all the

latest news and great special offers. Contact us at [email protected]

INFINITY SERVICING

STAYING UP TO DATE

5

INFINITY COMPRESSORS

COMPRESSOR RANGE 6CSK RANGE 8CSA RANGE 10CSB RANGE 12CSC & CSD RANGE 14DRC, DRD & DRE RANGE 18

6PAGE www.nesscopressure.com.au

INFINITY COMPRESSOR SYSTEMSCOMPRESSORS RANGE

3. LOWER MAINTENANCE COSTSThe advantages of IVR variable speed compressors aregreat and plentiful. Because the compressor adjusts to theactual air demand, there is a reduction in the overall workingpressure, which is also less straining on the compressor.

As a result, the overall maintenance cost is lower and the lifespan of the compressor is longer.

SO HOW MUCH CAN YOU SAVE?

An experienced Nessco Pressure Systems representative can conduct an evaluation of your current set-up, and based on his calculations, will provide recommendations on how to optimise your energy consumption and the efficiency of your compressors. As a result, you can reduce your costs, as well as your impact on the environment.

1. A REDUCED CARBON FOOTPRINT AND LOWEROVERALL COSTS

When purchasing a compressor, it is important to realise that your biggest cost over the lifecycle of a compressor is the operational cost. This is on average 3.5 times higher than the purchasing price. Our range of frequency-driven IVR compressors allows for an average reduction of 30% on electricity cost compared to conventional load/unload compressors. This way you can also benefit from reduced carbon dioxide emissions.

2. AN EXCELLENT RETURN ON INVESTMENTWhen investing in a new IVR compressor, the initialpurchasing price amounts to only about a fifth of the fulllifecycle cost. This means that your main focus when itcomes to cost reduction should be on where the greatestsavings can be achieved, namely the operational cost.With operational costs on average 30% lower, thesevariable speed compressors have an average paybacktime of no more than two years.

Infinity Compressor RangeNessco Pressure Systems pride ourselves on being able to provide a compressed air solution for every requirement, large or small. As such, we offer a range of different product levels, from simple box units, to tank & dryer packages, to variable speed options.

If you're not sure what package is right for you, simply contact one of our experienced compressed air representatives for a free consultation.

INFINITY PRO VARIABLE SPEED COMPRESSORS

Frequency-driven IVR compressors offer a multitude of benefits compared to fix speed models. The Infinity Pro series includes a range of compressors, from the CSC to the DRE, that will ensure lower maintenance costs, a reduced carbon footprint and excellent return on investment.

INFINITY COMPRESSORS

Infinity offers a wide range of box only compressors, from the simple and economical CSK to the high efficiency, gear driven DR range. Whether you require an every-day trade compressor or a more heavy duty industrial unit, we have the product to suit any application.

INFINITY PLUS COMPRESSOR PACKAGES

Infinity Plus packages include a compressor with tank & dryer, available in a range of models. A more economical solution to purchasing each unit separately, Infinity plus packages offer various cfm outputs, suited to a variety of industries.

Advantages of IVR Variable Speed Compressors

QUALITY

5

YEARS

WARRANTYQUAL

ITY

2

YEARS

WARRANTY QUAL

ITY

2

YEARS

WARRANTY

7PAGE(08) 9333 4999 [email protected]

INFINITY COMPRESSOR SYSTEMS

COMPRESSOR ONLY COMPRESSOR PACKAGES VARIABLE SPEEDCFM L/MIN MOTOR NOISE

LVL BAR CFM L/MIN MOTOR NOISE LVL BAR CFM L/MIN MOTOR NOISE

LVL BAR PAGE #

CSK

CSK 7.5/8 27 765 5.5 | 7.5 73 8 9

CSK 10/8 40 1133 7.5 | 10 73 8 9

CSK 15/8 51 1444 11 | 15 74 8 9

CSK 20/8 75 2124 15 | 20 75 8 9

CSA

CSA 5.5/8 21.2 600 4 | 5.5 60 8 11

CSA 7.5/8 29 821 5.5 | 7.5 64 8 11

CSA 10/8 39.6 1121 7.5 | 10 64 8 11

CSA 15/8 57.2 1620 11 | 15 63 8 11

CSA 20/8 70.7 2002 15 | 20 65 8 11

CSA 10/8-500D 39.6 1121 7.5 | 10 64 8 11

CSA 15/8-500D 57.2 1620 11 | 15 63 8 11

CSA 20/8-500D 70.9 2002 15 | 20 65 8 11

CSB

CSB 15/8 G3 64 1812 11 | 15 61 8 13

CSB 20/8 G3 84 2379 15 | 20 62 8 13

CSB 25/8 G2 103 2917 18.5 | 25 66 8 13

CSB 30/8 G2 127 3596 22 | 30 68 8 13

CSB 40/8 G2 140 3964 30 | 40 69 8 13

CSB 15/8 G3-500D 64 1812 11 | 15 61 8 13

CSB 20/8 G3-500D 84 2379 15 | 20 62 8 13

CSB 25/8 G2-500D 103 2917 18.5 | 25 66 8 13

CSB 30/8 G2-500D 127 3596 22 | 30 68 8

CSB 40/8 G2-500D 127 3596 22 | 30 68 8 13

CSB 20/8 G3 IVR 140 3964 30 | 40 69 8 23-88 660-2517 15 | 20 63 8 13

CSB 30/8 G2 IVR 36-131 1020-3700 22 | 30 69 8 13

CSB 40/8 G2 IVR 44-148 1240-4167 30 | 40 70 8 13

CSC

CSC 40 173 4899 30 | 40 70 8 16

CSC 50 216 6116 37 | 50 71 8 16

CSC 60 275 7887 45 | 60 72 8 16

CSC 40IVR 52-173 1472-4899 30 | 40 70 9.5 16

CSC 50IVR 65-216 1840-6116 37 | 50 71 9.5 16

CSC 60IVR 83-275 2350-7887 45 | 60 72 9.5 16

CSD CSD 75 307 8693 30 | 40 72 8 17

CSD 100 407 11525 37 | 50 75 8 17

CSD 75IVR 92-307 2605-8693 55 | 75 75 9.5 17

DR

C

DRC40 A 7.5 192 5437 30 | 40 69 7.5 20

DRC50 A 7.5 236 6683 37 | 50 71 7.5 20

DRC60 A 7.5 277 7844 45 | 60 72 7.5 20

DRC40DRY A 7.5 192 5437 30 | 40 69 7.5 20

DRC50DRY A 7.5 236 6683 37 | 50 71 7.5 20

DRC60DRY A 7.5 277 7844 45 | 60 72 7.5 20

DRC40IVR 58-192 1642-5437 30 | 40 69 9.5 21

DRC50IVR 71-236 2010-6683 37 | 50 71 9.5 21

DRC60IVR 83-277 2350-7844 45 | 60 72 9.8 21

DR

D

DRD75 A 7.5 340 9628 55 | 75 69 7.5 21

DRD100 A 7.5 442 12516 75 | 100 71 7.5 21

DRD75DRY A 7.5 340 9628 55 | 75 72 7.5 22

DRD100DRY A 7.5 442 12516 75 | 100 75 7.5 22

DRD75IVR 102-340 2888-9628 55 | 75 72 7.5 22

DRD100IVR 133-442 3766-12516 75 | 100 75 9.5 22

DR

E

DRE100 A 7.5 504 14272 75 | 100 72 7.5 23

DRE120 A 7.5 556 15744 90 | 125 74 7.5 23

DRE150 A 7.5 670 18972 110 | 150 75 7.5 23

DRE100IVR 151-504 4276-14272 75 | 100 72 9.5 23

DRE120IVR 167-556 4729-15744 90 | 125 74 9.5 23

DRE150IVR 119-673 3370-18972 110 | 150 75 9.5 23

COMPRESSORS RANGE

Note: All models also available in 10 & 13 bar variations.



Features CSK compressor benefits

TYPETANK DRYER

WITHOUT WITH WITHOUT WITH

FIXED SPEED VARIABLE SPEED

Infinity CSK Rotary Screw Compressor RangeEngineered for high performance efficiency and reliability, the CSK air compressor series is designed to meet the every-day compressed air demands of automotive repair industries, general maintenance and industry applications.

Providing an economical compressed air solution, the CSK can be installed almost anywhere, and close to your application without disturbing your working environment. Built to last, the CSK compressor range is suitable for continuous and hardworking conditions, and boasts user friendly controls and simple operation.

3 Built to last 3 User friendly controller 3 Easy and fast maintenance 3 Reliable cooling system 3 Small footprint 3 Economical for every-day compressed air

CSK RANGE

Variants

1. INNOVATIVE DESIGN CONCEPTCompact dimensions make it ideal for tyre shops,automotive workshops and general industryapplications. The CSK offers a small footprint of just0.6m2, meaning it fits easily into your workspace even inthe tightest applications.

3 Smart in high tech assembling 3 Simple in operation 3 Fast and easy maintenance with simple lift canopy.

2. ENCAPSULATED AIR FILTRATION INTAKEThe CSK range has been designed for your workingenvironment to ensure the air intake is correctly filteredto protect your valued investment.

3. OPTIMIZED AIR-OIL SEPARATORDesigned to provide an ultra-low residual oil content,with a maximum of only 3 ppm entering the network.The oversized air-oil separator has a large surface areato separate the oil, which also results in low pressuredrop and better energy efficiency.

4. RELIABLE COOLING SYSTEMAn independent cooling fan ensures stable cooline flow.

5. USER FRIENDLY CONTROLLERThe CSK features an electronic controller with easy andclear user interface. With easy to read operation statusand automatic compressor management, the controllerprovides maintenance and warning messages that aresimple to understand.



CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

CSK 7.5/8 25 5.5 | 7.5 73 8

CSK 10/8 36 7.5 | 10 73 8

CSK 15/8 51 11 | 15 74 8

CSK 20/8 61 15 | 20 75 8

Infinity CSK Screw Compressor

CSK RANGE



CSA compressor benefits

CSA RANGE

Infinity CSA Rotary Screw Compressor RangeThe Infinity CSA screw compressor features a three-phase electric motor (euro-voltage) and an elegant soundproofed body with a polyester powder paint surface.

The CSA boasts an oil reservoir with high efficiency air-oil seperator filters, and an external oil pre-filter to allow easy removal for cleaning.

Featuring safety devices including motor thermal protection, high air/oil temperature indicators, safety valves and minimum pressure valves, the Infinity CSA compressor is a high quality, highly durable product that will increase energy efficiencies.

3 Silenced dry air intake filter 3 Compressor with oil flooded asymmetric screws 3 Combined aluminium air-oil cooler with fine fins 3 Control & command instrument panel main switch 3 Steel plate base, allowing handling from three sides

Features

A rotary screw compressor with high yield, high reliability and low noise-levels, field-tested and proven under a wide variety of situations and conditions.

1. PERFORMANCEHigh performance, silent running, simple installation andmaintenance, make the CSA compressor the top modelcurrently available on the market.

2. HIGH-EFFICIENCY COMPRESSION ELEMENTSTwo asymmetric rotors are mounted on high quality,low wear ball and roller bearings. The high degree ofsealing and the fine tolerances used in the elements alsoguarantee even in small power ranges:

3 Greater yield 3 High efficiency 3 Long life and reliability 3 Lasting performance

3. SERVICEABILITY, EASY MAINTENANCEAir intake filter replacement - this operation only requiresremoval of the upper panel.

3 Discharge of condensate 3 Oil top-off 3 Oil change 3 Oil filter replacement 3 Oil separator filter replacement

4. REPLACING AND TENSIONING BELTSFor the replacement and/or tensioning of the belts, justremove one fixed protection (side panel). The specialtransmission design ensures proper alignment of thepulleys.

5. SILENT RUNNINGYears of experience have been applied to the issue ofnoise levels, with particular care taken in analysing theair flow inside the compressor and the use of suitablepanels with anti-noise devices, assembly of the variouscomponents, and the absence of transmitted vibrations.

6. HANDLINGThis series of compressor was also designed with theissue of transport and/or handling in mind. Accessibilityfor lifting is allowed on three of the four sides and easymovement is guaranteed by a careful selection of liftingpoints, positioned so as to obtain a balanced load.

Variants

TYPETANK DRYER





CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

WEIGHT (KG)

CSA 5.5/8 21.2 4 | 5.5 60 8 180

CSA 7.5/8 29.0 5.5 | 7.5 64 8 195

CSA 10/8 39.6 7.5 | 10 64 8 215

CSA 15/8 57.2 11 | 15 63 8 230

CSA 20/8 70.7 15 | 20 65 8 235

Infinity CSA Screw Compressor

CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

WEIGHT (KG)

TANK (L)

CSA 10/8-500D 39.6 7.5 | 10 64 8 350 500

CSA 15/8-500D 57.2 11 | 15 63 8 350 500

CSA 20/8-500D 70.7 15 | 20 65 8 350 500

Infinity Plus CSA Screw Compressor Package (with tank & dryer)

CSA RANGE

Infinity CSA recommended package

3

4

1 CSA 10 Compressor

2 500L Receiver

3 CDX36 Air Dryer

4 32mm Pipe

5 1 ½" Pre-Filter

6 1 ½" Coalescing Filter

7 Sepremium 2

5 6

7

2

1



CSB compressor benefits

CSB RANGE

Infinity CSB Rotary Screw Compressor RangeThe CSB range is a modern and aesthetically designed belt driven oil lubricated screw compressor offering a wide choice of variants, built with quality components in a state of the art assembly plant.

Featuring a powder coated soundproof canopy, with aesthetic and practical panels for servicing, the CSB range boasts a Class F Electric Motor, greased for life and protected by thermal relay.

The CSB range can fulfil industrial requirements of up to 147 cfm with maximum reliability and efficiency whilst ensuring user friendliness, easy serviceability and low noise levels.

1. SIMPLE HANDLINGThree forklift openings have been designed in the canopyframe (front/rear/right) and are located to ensure themachine well is balanced at all times. Installation of theunit is safe and easy, as manoeuvrability is possible witha simple pallet truck.

2. EFFICIENT COOLINGCooling has been given special attention in order toincrease the life of internal components, to optimizethe compression efficiency, and to guarantee optimumcompressed air outlet temperature.

3 A nozzle directs the air flow towards the turbine mounted on the main motor in order to obtain efficiency and the lowest noise levels. 3Main motor benefits from independent cooling. 3 Duction on the roof mounted cooler is possible without compromising maintenance access.

3. GREAT PRODUCT FEATURES FOR HIGHEFFICIENCIES AND LESS DOWNTIME

• Asymmetrical oil lubricated screwsHigh efficiency element built with low-wear bearings andexact tolerances for long term performance.

• Oil filter and Air/Oil separator cartridgeEasy removal for quick servicing. Ensuring less than 3ppm of oil content in the compressed air.

• Aluminium combined Air/Air and Air/Oil coolerMounted on roof for easy ducting. Sized to ensure lowoil temperature and low compressed air temperatureeven in maximum ambient conditions.

• Electronic controller ES4000User friendly and comprehensive information display.

• Oil tankVertical vessel for initial gravity separation.Oil sight glass visible through canopy and drain valve onoil outlet for easy servicing.

• Cooling turbineImproved efficiency compared to a conventional fan andlow noise levels.

• Pulley-belt assemblyGuided alignment for efficiency, with easy tensioningsystem.

3 Air intake external filtration foam with dust protection for internal components 3 High efficiency encapsulated air filter 3 Oil filter and air/oil separator cartridge with easy removal for quick servicing 3 Electric Controller (ES4000) 3 Vertical oil tank for initial gravity separation

Features

Variants

TYPETANK DRYER





CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

WEIGHT (KG)

CSB 15/8 G3 64 11 | 15 61 8 283

CSB 20/8 G3 84 15 | 20 62 8 302

CSB 25/8 G2 103 18,5 | 25 66 8 414

CSB 30/8 G2 127 22 | 30 68 8 430

CSB 40/8 G2 140 30 | 40 69 8 458

Infinity CSB Screw Compressor

CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

WEIGHT (KG)

CSB 15/8 G3-500D 64 11 | 15 61 8 495

CSB 20/8 G3-500D 84 15 | 20 62 8 514

CSB 25/8 G2-500D 103 18.5 | 25 66 8 632

CSB 30/8 G2-500D 127 22 | 30 68 8 660

CSB 40/8 G2-500D 140 30 | 40 69 8 690

Infinity Plus CSB Screw Compressor Package (tank & dryer)

CSB RANGE

CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

CSB 20/8 G3 IVR 23-88 15 | 20 63 8

CSB 30/8 G2 IVR 36-131 22 | 30 69 8

CSB 40/8 G2 IVR 44-148 30 | 40 70 8

Infinity Pro CSB Screw Compressor (variable speed)


INFINITY COMPRESSOR SYSTEMSCSC/CSD RANGE

Infinity CSC & CSD Rotary Screw Compressor RangeInfinity CSC/CSD compressors are a compact, easy to install range, offering belt or gear driven, fixed or variable speed models. Requiring minimal maintenance, they boast high quality and performance, making it the best range for strong, economical compressed air distribution.

The CSC/CSD range features a high efficiency pumping action, resulting in greater output and increased durability. A careful monitoring of air flow inside the unit ensures optimum temperature levels throughout.

3 High efficiency pumping action, resulting in greater output and reliability 3 Compact design 3 Easy access to all first-class components 3 Improved ES4000 controller 3 Standard filtration panel for efficient filtration and low pressure drop

Features

FIX SPEED VOLTAGESMODEL L (mm) W (mm) H (mm)

CSC 40-50-60 1247 1060 1630

CSD 75 1420 1060 1630

CSD 100 1660 1060 1630

VARIABLE SPEED VOLTAGESMODEL L (mm) W (mm) H (mm)

CSC 40-50-60 IVR 1420 1060 1630

CSD 75 IVR 1660 1060 1630

CSC & CSD compressor benefits

1. HIGH EFFICIENCY PUMPING ACTIONTwo asymmetrical profile rotors of equal diameter aremounted on top quality, long life bearings. Rotors withtop quality, leak proof seals and superior tolerance levelsensure:

3 Greater output 3 High efficiency 3 Durability and reliability 3 Constant, durable performance

2. COOLING SYSTEMCareful monitoring of air flow inside the unit ensuresoptimum air discharge temperature. The air flowconveys cool air to the main components and maintainsoptimum temperature levels throughout the unit.Maintaining a low operating temperature is essentialfor reliable long-term operation.

3. NOISE FREEPrecise analysis of air flow inside the unit, use ofnoise-reduction panels, careful installation of variouscomponents, and vibration-free operation all contributeto making our compressor unit a market leader. Thanksto its low noise levels, the compressor can be used inworkplaces and even close to offices.

4. SAFETYAn electronic controller manages the operation ofthe unit and contains an LED display that emits thefollowing signals:

3 Flashing light: transitory phase (machine ready for operation, on standby or alarms) 3 Constant light: operational phase, alarms and emergencies.

HEIG

HT

LENGTH

WIDTH

Variants

Dimensions

TYPETANK DRYER





ES4000 Electronic Controller & Display Interface1. ELECTRONIC REGULATIONThe ES4000 is a control system, designed for medium and high power compressors.

2. THE CONTROLLER • Management of all operations relative to

the use of the compressor: pressurisation, running dry, stopping and re-starting the compressor

• Control and regulation of the machine• Information on possible anomalies• Shut down of the compressor due to

engagement of an alarm• Visualisation on the machine’s

maintenance programme

3. KEYBOARDSoft touch panels for:• Starting and stopping the compressor• Reset of alarms• Using the maintenance menu• Controller test operation

4. SIGNALLINGAppropriate signal lights (LED) indicate the state of the compressor. Operating under regulator control, power on, pre-warning and warning of anomalies; and for safety purposes.

5. CONTROLSTwo control displays indicate all functional conditions of the machine, all visible in a simple and clear manner. Two functional keys and two scrolling keys permit the control and programming of the card.

6. THE ELECTRONIC CONTROLLERControls and operates the compressor, modifies parameters of operation and transmits information to user. Is equipped with: eight digital input connections, four analog input connections controls, 14 digital and one analog out devices and also one serial port and one interface port.

CSC/CSD RANGE

Compressor Box Components

12

3

4 10

11

12

13

5 6

7

8 9

1 Filtration panel

2 Emergency stop

3 Controller

4 Air filter

5 Oil cooler

6 Air cooler

7 Cubicle

8 Inverter

9 Oil-separator vessel

10 Axial fan

11 Air end

12 Motor

13 Belt driven



CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

WEIGHT (KG)

CSC 40 173 30 | 40 70 8 748

CSC 50 216 37 | 50 71 8 832

CSC 60 275 45 | 60 72 8 862

Infinity CSC Screw Compressor

CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

WEIGHT (KG)

CSC 40IVR 52-173 30 | 40 70 9.5 798

CSC 50IVR 65-216 37 | 50 71 9.5 882

CSC 60IVR 83-275 45 | 60 72 9.5 912

Infinity Pro CSC Screw Compressor (variable speed)

Infinity CSC recommended package

1 CSC 50 Compressor

2 CDX65 Air Dryer

3 1240L Receiver

4 40mm Pipe

5 2" Pre-Filter

6 2" Coalescing Filter

7 Sepremium 10

5 6

4

1

3

2

7



CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

WEIGHT (KG)

CSD 75 307 30 | 40 72 8 1073

CSD 100 407 37 | 50 75 8 1280

Infinity CSD Screw Compressor

CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

WEIGHT (KG)

CSD 75IVR 92-307 55 | 75 75 9.5 1073

Infinity Pro CSD Screw Compressor (variable speed)

Infinity CSD recommended package

1 CSD 75 Compressor

2 CDX100 Air Dryer

3 2000L Receiver

4 40mm Pipe

5 2" Pre-Filter

6 2" Coalescing Filter

7 Sepremium 10

5 6

1

3

2

4

7


INFINITY COMPRESSOR SYSTEMSDRC/DRD/DRE RANGE

Infinity DRC, DRD & DRE Rotary Screw Compressor RangeThe Infinity DRC, DRD and DRE range are high quality, oil injected gearbox driven compressors, suitable for use with a variety of constant speed or variable speed drivers.

Offering simple installation and easy maintenance and accessibilty, the DR series offers high output and flow, suitable for industrial applications.

3 High performance for less energy consumption 3 Lower maintenance costs 3 No transmission losses 3 No belt tensioning 3 Available in box, package and IVR models

Features

DR compressor benefits

1. SIMPLE INSTALLATION 3 Compact and all in one system 3 Innovative design 3 No special foundation needed

2. SOLID QUALITY 3 Outstanding, first-class components 3 High quality and long lasting belts 3 Overload protection 3 Full automatic control 3 High quality, heavy duty motor

3. EASY MAINTENANCE & ACCESSIBILITY 3 All service components located at the front of themachine for excellent accessibility 3 Easy access for service or cleaning 3 Oil-level eye at the front

4. COST SAVING 3 Less repair costs 3 Lower maintenance costs 3 Lower energy consumption 3 Optimal efficiency, lubrification and cooling

5. SAFETY 3 Emergency stop 3 Protection grid 3 Separate panel for beltguard 3 Closed inverter cubicle

TYPETANK DRYER

WITHOUT WITH WITHOUT WITHDRC/DRD

FIXED SPEED DRE

FIXED SPEED DRC/DRD

VARIABLE SPEED DRE

VARIABLE SPEED

FIX SPEED VOLTAGES

MODEL L standard (mm)

L with dryer (mm) W (mm) H (mm)

DRC 40-50-60 1420 2071 1060 1630

DRC 75-100 1660 2510 1060 1630

DRE 100-120 1860 - 1060 1630

VARIABLE SPEED VOLTAGES

MODEL L standard (mm)

L with dryer (mm) W (mm) H (mm)

DRC 40-50-60 IVR 1420 2071 1060 1630

DRC 75-100 IVR 1660 2510 1060 1630

DRE 100-120 IVR 1860 - 1060 1630

HEIG

HT

LENGTH

WIDTH

Variants

Dimensions



Compressor Components

OPTIONBELT DRIVER GEARBOX DRIVEN

FIXED SPEED VARIABLE SPEED FIXED SPEED VARIABLE SPEED

Water separator Automatic drain for water separator* Wrong rotation direction protection standard standard High efficiency air intake filtration High efficiency pre-filtration panel

Standard filtration panel standard standard Noise reduction baffle (super silent)

Oil heater Main switch

8000 hours oil Foodgrade oil

Integrated energy recovery system Woodenbox packaging

Tropical thermostatic valve Automatic restrat after power failure standard standard standard standard

ES 4000 advanced controller standard standard

Optional & Standard Features

1 2

34

4

10

11 12

13

55

6

7

889

1 Filtration panel

2 Emergency stop

3 Controller

4 Oil Cooler

5 Air cooler

6 Cubicle

7 Inverter

8 Integrated dryer

9 Oil-Separator vessel

10 Axial fan

11 Air ends

12 Motor

13 Air filter



CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

WEIGHT (KG)

DRC40IVR 58-192 30 | 40 69 9.5 810

DRC50IVR 71-236 37 | 50 71 9.5 890

DRC60IVR 83-277 45 | 60 72 9.8 895

DRC40IVR DRY 58-192 30 | 40 69 9.5 995

DRC50IVR DRY 71-236 37 | 50 71 9.5 1075

DRC60IVR DRY 83-277 45 | 60 72 9.8 1080

Infinity Pro DRC Screw Compressor (variable speed)

CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

WEIGHT (KG)

DRC40DRY A 7.5 192 30 | 40 69 7.5 945

DRC50DRY A 7.5 236 37 | 50 71 7.5 1025

DRC60DRY A 7.5 277 45 | 60 72 7.5 1030

Infinity Plus DRC Screw Compressor package (with dryer)

Infinity DRC Screw Compressor

CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

WEIGHT (KG)

DRC40 A 7.5 192 30 | 40 69 7.5 760

DRC50 A 7.5 236 37 | 50 71 7.5 840

DRC60 A 7.5 277 45 | 60 72 7.5 845

*'DRY' models include inbuilt dryer



CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

WEIGHT (KG)

DRD75 A 7.5 340 55 | 75 69 7.5 1100

DRD100 A 7.5 442 75 | 100 71 7.5 1287

Infinity DRD Screw Compressor

CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

WEIGHT (KG)

DRD75IVR 102-340 55 | 75 72 9.5 1170

DRD100IVR 133-442 75 | 100 75 9.5 1357

DRD75IVR DRY 102-340 55 | 75 72 9.5 1443

DRD100IVR DRY 133-442 75 | 100 75 9.5 1630

Infinity Pro DRD Screw Compressor (variable speed)

CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

WEIGHT (KG)

DRD75DRY A 7.5 340 55 | 75 72 7.5 1373

DRD100DRY A 7.5 442 75 | 100 75 7.5 1560

Infinity Plus DRD Screw Compressor Package (with dryer)

*'DRY' models include inbuilt dryer



CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

WEIGHT (KG)

DRE100 A 7.5 504 75 | 100 72 7.5 1540

DRE120 A 7.5 556 90 | 125 74 7.5 1570

DRE150 A 7.5 670 110 | 150 75 7.5

Infinity DRE Screw Compressor

CODE FAD (CFM)

MOTOR (KW | HP)

NOISE LEVEL DB(A)

PRESSURE (BAR)

WEIGHT (KG)

DRE100IVR 151-504 75 | 100 72 9.5 1610

DRE120IVR 167-556 90 | 125 74 9.5 1640

DRE150IVR 119-673 110 | 150 75 9.5 1860

Infinity Pro DRE Screw Compressor (variable speed)

23

INFINITY DRYERS & RECEIVERS

AIR DRYERS 24AIR RECEIVERS 27AIR RECEIVER ACCESSORIES 30



For example, 5.1 l/h of condensate is separated from a compressor with an output capacity of 10 Nm3/min and an ambient intake air temperature of 20°C and 70% relative humidity, whilst operating at a delivery pressure of 8 bar(g) and cooling the air to 30°C.

If the compressed air is then dried even more to a dewpoint of +3°C, a further 1.7 l/h of condensate can be separated.

AIR INTAKE20°C | 70% UR

COMPRESSION10 NM3/1 | 8 BAR

COOLING10 NM3/1 | 8 BAR | 30°C

CONDENSATE5,1 L/H

1

2

AIR DRYERS

Infinity Air Dryer SystemsHumidity is a component of atmospheric air, which can be found in the form of condensate and/or vapour in compressed air distribution systems and the machines that use the compressed air.

If the condensate can be easily separated and discharged, humidity, in the form of vapour, will follow the compressed air flow all the way to the final product. When it then cools, a part of this humidity present in the compressed air condenses and over time causes serious damage to the distribution network, the machines using the compressed air and the final product.

Air Dryer benefits

How Air Dryers Work

1. DISTRIBUTION UNIT COSTThe distribution unit is more economical and can be installed without slopes to drain points, without separators and without condensate drains. Simple “T” drops coming directly from the distribution ring.

2. GREATER PRODUCTIVITYGreater productivity because of fewer untimely breakdowns due to machine faults.

3. LOWER MAINTENANCE COSTS • For the distribution network, as there is no need to

clean line separators or check the operation of the drains, which at times may be spread over very wide areas.

• For machine applications and pneumatic tools, as the absence of condensate eliminates the main cause of breakdowns.

4. PROFITABILITY AND CREDIBILITYGreater productivity thanks to fewer untimely breakdowns due to machine faults. Maintenance managers, production managers, and air compressor specialists make sure their systems have a dryer.

5. LONGER LASTING EQUIPMENTLonger life for pneumatic equipment, as the use of dry air guarantees reliable performance over time.

6. HIGHER FINAL PRODUCT QUALITYHigher final product quality both for applications where compressed air comes directly into contact with the product and where the air acts purely to assist movement of the machine’s servo mechanisms.

7. SAVINGS• High energy savings due to low pressure drops

throughout the system. • No wastage of compressed air because of the intelligent

automatic discharge of condensate. • A cleaner compressed air distribution network without

leakage. Greater reliability and longer life of applications.

• Less maintenance and easier maintenance both due to the reliability of the components and the easy access to any internal component. Safe and reliable operation.



1. QUALITYHigh reliability attained through the development of the dryers in the CDX range. First-class components that have been tested under the worst possible operating conditions. Constant dewpoint under any load condition. Automatic operation.

2. INSTALLATION Its unique light and compact design makes it easy to transport by whatever means. Installation of the CDX dryer is simple and does not require any special equipment nor any special foundation work, whether it is a new system or an update to an existing system. All that is necessary is a pneumatic and an electrical connection plus filters and the dryer is ready to use.

3. MAINTENANCE Years of experience, the quality of the components we use, the generous size of the unit, its simple design and effective control system all contribute towards making these units safe and reliable over time. All the dryers in the CDX range have been designed and built with particular attention given to operation and performance using first-class components that have been tested in the field for many years. The refrigerant dryer offered by Infinity is a unit that:

• Requires low maintenance and long intervals between overhauls;

• Has few components subject to stress.

Infinity CDX Air DryerInfinity Advanced Air Solutions is one of the world’s leading manufacturers of dryers and is the only air compressor manufacturer that designs and manufactures all the dryers they use for their range of compressors in their own factories.

AIR DRYERS

Layout

CDX Air Dryer features

AIR OUTLET

AIR INLET

CONDENSATE DRAIN

1

2

3

4

5

6

7

9

1015

11 12

13

16

17 18

19

148

1 Refrigerant fluid compressor

2 Condenser

3 Motor-driven ventilator

4 Air/Refrigerant evaporator

5 Condensate separator with a demister filter

6 Air/air heat exchanger

7 Refrigerant fluid separator

8 Maximum pressure switch

9 Service valve

10 Minimum pressure switch

11 Pressure switch, fan control

12 Hot gas bypass valve

13 Refrigerant fluid filter

14 Capillary tube

15 Service valve

16 Dewpoint thermometer

17 Impurity collector

18 Automatic discharge of condensate

19 Instrument panel


INFINITY DRYERS & RECEIVERSAIR DRYERS

CODE FAD (CFM) PRESSURE (BAR) PSI 10,200WATT PORT SIZE DIMENSIONS

(L X W X H)WEIGHT

(KG)

CDX 12 42.4 16 232 266 3/4” M 350 x 500 x 450 25

CDX 18 64.4 16 232 284 3/4” M 350 x 500 x 450 27

CDX 24 83 13 188 609 1” F 370 x 500 x 764 44

CDX 30 106 13 188 673 1” F 370 x 500 x 764 44

CDX 36 127 13 188 793 11/2” F 460 x 560 x 789 53

CDX 41 145 13 188 870 11/2” F 460 x 560 x 789 60

CDX 52 184 13 188 1,072 11/2” F 460 x 560 x 789 65

CDX 65 230 13 188 1.190 11/2” F 580 x 590 x 899 80

CDX 77 272 13 188 1.446 11/2” F 580 x 590 x 899 80

CDX 100 353 13 188 1,818 2” F 735 x 898 x 962 128

CDX 120 424 13 188 1,319 2” F 735 x 898 x 962 146

CDX 150 530 13 188 1,631 2” F 735 x 898 x 962 158

CDX 180 636 13 188 1,889 2” F 735 x 898 x 962 165

CDX 240 848 13 188 2,110 3” F 1,020 x 1,082 x 1,535 325

CDX 300 1,060 13 188 3,900 3” F 1,020 x 1,082 x 1,535 335

CDX 350 1,237 13 188 4,460 3” F 1,020 x 1,082 x 1,535 350

CDX 450 1,589 13 188 5,550 DN125 1,020 x 1,082 x 1,535 380

CDX 500 1,766 13 188 6,715 DN125 1,020 x 2,099 x 1,535 550

CDX 700 2,472 13 188 6,800 DN125 1,020 x 2,099 x 1,535 600

Infinity CDX Refrigeration Air Dryers


INFINITY DRYERS & RECEIVERSAIR RECEIVERS

Infinity Vertical Air ReceiversInfinity offers a popular range of vertical air receivers that are specifically designed for use in industrial compressed air systems.

These premium quality pressure vessels are exclusively made in our affiliated factory that is ISO 9001 compliant.

Save time and money when purchasing a vertical air receiver by selecting from our extensive stock of competitively priced pressure vessels that are available for immediate delivery to anywhere in Australia.

3 Design safety verified in accordance with Australian Standard AS 1210. 3Manufacturer’s Data Report provided in accordance with Australian Standard AS 4458. 3 OH&S Registered Design approved for workplace use in all Australian States and Territories. 3 Industry preferred socket sizes and placement. Reinforced vessel support attachments. 3 External surfaces are abrasive blast cleaned, primed and finish coated in two-pack polyurethane paint 3 Dulux® Process Blue external colour indicates compressed air content in accordance with Australian Standard AS 1345. 3 Individually packed in a horizontal position inside a full timber crate with plastic bag cover. 3 Design optimized for ease of handling, transport, storage and installation.

Features



CODE FS V150LPPRESSURE 1,240 kPa | 180psiWEIGHT 80kg




TECHNICAL SPECSA B C D E F G H

390 214 1700 750 450 375 250 622J K L M N P Q R

1200 1/2” 3/4” 1 1/2” 150 1/2” 14 388


640 300 2140 820 750 445 250 750J K L M N P Q R

1500 1/2” 3/4” 2” 150 1/2” 14 667


490 250 2210 780 900 405 250 825J K L M N P Q R

1650 1/2” 3/4” 1 1/2” 150 1/2” 14 505


780 360 2215 875 720 500 250 735J K L M N P Q R

1470 3/4” 3/4” 2” 150 1/2” 18 791

AIR RECEIVERS

150L Air Receiver

530L Air Receiver

330L Air Receiver

820L Air Receiver



CODE FS V1240LP FS V1240-1395PRESSURE 1,100 kPa | 160psi 1,395 kPa | 202 psiWEIGHT 552kg 680kg


975 500 2213 889 690 514 250 720J K L M N P Q R

1440 3/4” 1” 2” 150 1/2” 18 967

3 Design temperature range: 0°C to 100°C. 3 Design fluid contents: Non harmful gas. 3 Inspection openings and nameplate not shown for clarity. 3 All socket threads are BSPP (British Standard Pipe Parallel).

ØA

B

L BSP

M BSP

M BSP

H

J

K BSP

P BSP

N

G

F

D

C

E

M BSP

M BSP

ØQ ON R PCDMOUNTING HOLES

120°

120°120°

AIR RECEIVERS

1240L Air Receiver

Technical characteristics

CODE FS V2400LPPRESSURE 1,080 kPa | 157psiWEIGHT 1,080kg


1160 640 2870 1015 1100 615 245 900J K L M N P Q R

1900 1" 1" 3 E 200 1" 20 1350

2400L Air Receiver

CODE FS V5000LPPRESSURE 1,145 kPa | 166psiWEIGHT 2,080kg


1455 820 3705 1095 1780 695 245 900J K L M N P Q R

2580 1" 1" 4E 250 1" 20 1665

5000L Air Receiver


INFINITY DRYERS & RECEIVERSAIR RECEIVER ACCESSORIES

V150-530LP Auto-Drain Accessory Kit V150-530LP Manual Drain Accessory Kit

CODE GM V150-530LP AD KITSAFETY VALVE PRESSURE 1,035 kPa (150 psi)SAFETY VALVE FLOW RATE 7.87 m3/min (278 cfm)SAFETY VALVE THREAD 1/2 inch BSPPRESSURE GAUGE SCALE 0-1,600 kPaPRESSURE GAUGE DIAL 80 mmDRAIN TYPE Auto-float valveDRAIN INLET SIZE 1/2 inch BSPDRAIN OUTLET SIZE 1/8 inch BSP

CODE GM V150-530LP KITSAFETY VALVE PRESSURE 1,035 kPa (150 psi)SAFETY VALVE FLOW RATE 7.87 m3/min (278 cfm)SAFETY VALVE THREAD 1/2 inch BSPPRESSURE GAUGE SCALE 0-1,600 kPaPRESSURE GAUGE DIAL 80 mmDRAIN TYPE Manual ball valveDRAIN INLET SIZE 1/2 inch BSPDRAIN OUTLET SIZE 1/2 inch BSP

V820LP Auto-Drain Accessory Kit V820LP Manual Drain Accessory Kit

CODE GM V820LP AD KITSAFETY VALVE PRESSURE 1,035 kPa (150 psi)SAFETY VALVE FLOW RATE 7.87 m3/min (278 cfm)SAFETY VALVE THREAD 1/2 inch BSPPRESSURE GAUGE SCALE 0-1,600 kPaPRESSURE GAUGE DIAL 80 mmDRAIN TYPE Auto-float valveDRAIN INLET SIZE 1/2 inch BSPDRAIN OUTLET SIZE 1/8 inch BSP

CODE GM V820LP KITSAFETY VALVE PRESSURE 1,035 kPa (150 psi)SAFETY VALVE FLOW RATE 7.87 m3/min (278 cfm)SAFETY VALVE THREAD 1/2 inch BSPPRESSURE GAUGE SCALE 0-1,600 kPaPRESSURE GAUGE DIAL 80 mmDRAIN TYPE Manual ball valveDRAIN INLET SIZE 3/4 inch BSPDRAIN OUTLET SIZE 3/4 inch BSP


INFINITY DRYERS & RECEIVERSAIR RECEIVER ACCESSORIES

V1240LP Auto-Drain Accessory Kit V1240LP Manual Drain Accessory Kit

CODE GM V1240LP AD KITSAFETY VALVE PRESSURE 1,035 kPa (150 psi)SAFETY VALVE FLOW RATE 17.02 m3/min (601 cfm)SAFETY VALVE THREAD 3/4 inch BSPPRESSURE GAUGE SCALE 0-1,600 kPaPRESSURE GAUGE DIAL 80 mmDRAIN TYPE Auto-float valveDRAIN INLET SIZE 1/2 inch BSPDRAIN OUTLET SIZE 1/8 inch BSP

CODE GM V820LP KITSAFETY VALVE PRESSURE 1,035 kPa (601 psi)SAFETY VALVE FLOW RATE 17.02 m3/min (278 cfm)SAFETY VALVE THREAD 3/4 inch BSPPRESSURE GAUGE SCALE 0-1,600 kPaPRESSURE GAUGE DIAL 80 mmDRAIN TYPE Manual ball valveDRAIN INLET SIZE 3/4 inch BSPDRAIN OUTLET SIZE 3/4 inch BSP

CODE DESCRIPTIONST-200 Super Trap Auto Drain 220V

CODE DESCRIPTIONEZI1 AUTO DRAIN Timed electronic auto drain 1/2” 230V

Super Trap Electronic Timer Drain



CODE 1612402THREAD 1/4 BSPT CBMDESCRIPTION 50MMX 1600KPA/psi

CODE 1612800THREAD 1/4 BSPT LMDESCRIPTION 80MMX 1600KPA/psi



AIR RECEIVERS ACCESSORIES

Pressure Gauge 40mm

Pressure Gauge 80mm

Pressure Gauge 50mm

Pressure Gauge 63mm

33

INFINITY FILTRATION

INDUSTRIAL FILTRATION 34FILTERS, REGULATORS, LUBRICATORS 42OIL/WATER SEPARATORS 52


INFINITY FILTRATIONINDUSTRIAL FILTRATION

Industrial Pre-FilterThe Infinity industrial pre-filter is made of high quality aluminium alloy and carbon steel.

Featuring a compact design to reduce space for maintenance, its surface is coated with epoxy resin powders so as to improve its durability and resistance to corrosion.

The pre-filter features a high quality industrial float drain with ball valve for easy condensate removal and a threaded connection is used as both an inlet and outlet. The filter housing is marked with direction of air flow for ease of use, and the auto drain is serviceable without shutting off the air supply.

CODE DESCRIPTION MICRONS FLOW RATE CFM MAX PRESSURE PSI MAX TEMP CONNECTION SIZE

IN-F15P-320 Industrial Pre-Filters 1/2" 5 35 232 65°C 1/2”

IN-F20P-320 Industrial Pre-Filters 3/4" 5 70 232 65°C 3/4”

IN-F25P-320 Industrial Pre-Filters 1" 5 105 232 65°C 1”

IN-F40P-320 Industrial Pre-Filters 1 1/2" 5 210 232 65°C 1 1/2”

IN-F50P-320 Industrial Pre-Filters 2” 5 630 232 65°C 2”

IN-F63P-320 Industrial Pre-Filters 2 1/2” 5 840 232 65°C 2 1/2”

3 Filtration rating: 5µm 3 Oil content: 5ppm 3Maximum pressure: 232 psi

Features

Specs



CODE FIG. A B C CONNECTION SIZE

IN-F15P-320

1

104 +/-0.8 243 +/-1.2 217 +/-1.2 1/2”

IN-F20P-320 104 +/-0.8 313 +/-1.2 287 +/-1.2 3/4”

IN-F25P-320 104 +/-0.8 313 +/-1.2 287 +/-1.2 1”

IN-F40P-320

2

138 +/-0.8 624 +/-1.2 624 +/-1.2 1 1/2”

IN-F50P-320 148 +/-0.8 685 +/-1.2 639 +/-1.2 2”

IN-F63P-320 150 +/-0.8 850 +/-1.2 800 +/-1.2 2 1/2”

The function of a pre-filter (or particulate filter) is to remove solid particles such as dust, pollen, mold and bacteria from the air.

Particles are removed from the air using a two port filter housing and pre-filter element, specifically designed for this purpose. The ultra fine fibres of the pre-filter element capture microscopic particles up to 50 times smaller than the eye can see through a combination of diffusion, interception and inertial impaction.

With smaller particles, diffusion occurs when the random motion of the particles causes them to collide with fibres. Interception occurs when larger particles directly collide with a fibre. When a particle’s inertia leads to its collision with a fibre, this is known as inertial impaction.

To select the correct size of filter for a particular application, choose on the basis of air flow and system pressure, rather than pipe size. Select a filter large enough to ensure that the air exits the filter at a low velocity.

Pre-filters are ideal for general purpose air tools and building sites, and used as the first stage before an Infinity coalescing and absorption filter. It is also recommended that they be used to filter the air before it reaches the air dryer.

The diagram below shows the pre-filter process. Compressed air flows from the compressor, entering the filter housing via the inlet. As the air flows through the filter element from inside to out, dust particles and condensate are removed and collected at the bottom of the bowl where they are ejected automatically by the auto drain system.

Fig. 1

A

BC

Fig. 2

A

CB

INLET FILTERED OUTLET

DRAIN

Filter

Filter Housing

Manual Drain Valve

Connection Size of Inlet and Outlet

Filter Housing

Filter

Manual Drain Valve


Functionality

Technical Characteristics


INFINITY FILTRATION

Industrial Coalescing FilterThe Infinity industrial coalescing filter is made of high quality aluminium alloy and carbon steel.

Featuring a compact design to reduce space for maintenance, its surface is coated with epoxy resin powders so as to improve its durability and resistance to corrosion.

The coalescing filter features a high quality industrial float drain with ball valve for easy condensate removal, and a threaded connection is used as both an inlet and outlet.

The filter housing is marked with direction of air flow for ease of use, and the auto drain is serviceable without shutting off the air supply.

INDUSTRIAL FILTRATION


IN-F15C-130 Coalescing Filters 1/2" 0.01 35 232 65°C 1/2”

IN-F20C-130 Coalescing Filters 3/4" 0.01 70 232 65°C 3/4”

IN-F25C-130 Coalescing Filters 1" 0.01 105 232 65°C 1”

IN-F40C-130 Coalescing Filters 1 1/2" 0.01 210 232 65°C 1 1/2”

IN-F50C-130 Coalescing Filters 2” 0.01 630 232 65°C 2”

IN-F63C-130 Coalescing Filters 2 1/2” 0.01 840 232 65°C 2 1/2”

3 Filtration rating: 0.01µm 3 Oil content: 1ppm 3Maximum pressure: 232 psi

Features

Specs


INFINITY FILTRATION


IN-F15C-130

1

104 +/-0.8 243 +/-1.2 217 +/-1.2 1/2”

IN-F20C-130 104 +/-0.8 313 +/-1.2 287 +/-1.2 3/4”

IN-F25C-130 104 +/-0.8 313 +/-1.2 287 +/-1.2 1”

IN-F40C-130

2

138 +/-0.8 624 +/-1.2 624 +/-1.2 1 1/2”

IN-F50C-130 148 +/-0.8 685 +/-1.2 639 +/-1.2 2”

IN-F63C-130 150 +/-0.8 850 +/-1.2 800 +/-1.2 2 1/2”

The main function of the coalescing filter is to trap and subsequently remove liquid, oil and water from a compressed air stream.

The separation of aerosol and solid contaminants from air is primarily dictated by gravity. Larger contaminants settle out of the air stream fairly quickly, however extremely small aerosol particles remain suspended, particularly in flowing air. The coalescing filter combines these aerosols into even larger droplets as they pass through the filter element’s fibre matrix, eventually becoming large enough to be susceptible to the force of gravity and be drained away.

The coalescing filter can be seen as a multifunctional filtration solution, due to its ability to filter particulates just as effectively as it can coalesce aerosols and droplets. If you have an application that requires both types of filtration, a coalescing filter is ideal.

To select the correct size of filter for a particular application, choose on the basis of air flow and system pressure, rather than pipe size. Select a filter large enough to ensure that the air exits the filter at a low velocity and does not carry over coalesced liquid.

Coalescing filters are ideal for use after air has flowed through the compressed air dryer, acting as an excellent condensate removal. They are best used with an Infinity pre-filter.

The diagram below shows the coalescing process. Air enters the housing and flows through the filter media, passing from the inside element surface to the outside. Coalesced liquid collects in the bowl where it is drained and clean air exits the housing through the outlet port.

INLET OUTLET

DRAIN

Fig. 1

A

BC

Fig. 2

A

CB

Filter

Filter Housing

Manual Drain Valve


Filter Housing

Filter

Manual Drain Valve


INDUSTRIAL FILTRATION

Functionality




Industrial Absorption FilterActivated absorption filters offer the final stage of filtration. The activated carbon removes smells and odors from the system, particularly important in breathing air systems. Combined with an Infinity pre-filter and coalescing filter, this filter set will offer air to a quality of 0.003ppm.

The absorption filter features a high quality industrial float drain with ball valve for easy condensate removal, and a threaded connection is used as both an inlet and outlet.

The filter housing is marked with direction of air flow for ease of use, and the auto drain is serviceable without shutting off the air supply.


IN-F15A-150 Absorption Filters 1/2" 0.01 35 232 65°C 1/2”

IN-F20A-150 Absorption Filters 3/4" 0.01 70 232 65°C 3/4”

IN-F25A-150 Absorption Filters 1" 0.01 105 232 65°C 1”

IN-F40A-150 Absorption Filters 1 1/2" 0.01 210 232 65°C 1 1/2”

IN-F50A-150 Absorption Filters 2” 0.01 630 232 65°C 2”

IN-F63A-150 Absorption Filters 2 1/2” 0.01 840 232 65°C 2 1/2”

3 Filtration rating: 0.01µm 3 Oil content: 0.003ppm 3Maximum pressure: 232 psi

Features

Specs




IN-F15A-150

1

104 +/-0.8 243 +/-1.2 217 +/-1.2 1/2”

IN-F20A-150 104 +/-0.8 313 +/-1.2 287 +/-1.2 3/4”

IN-F25A-150 104 +/-0.8 313 +/-1.2 287 +/-1.2 1”

IN-F40A-150

2

138 +/-0.8 624 +/-1.2 624 +/-1.2 1 1/2”

IN-F50A-150 148 +/-0.8 685 +/-1.2 639 +/-1.2 2”

IN-F63A-150 150 +/-0.8 850 +/-1.2 800 +/-1.2 2 1/2”

Fig. 1

A

BC

Fig. 2

A

CB

Filter

Filter Housing

Manual Drain Valve


Filter Housing

Filter

Manual Drain Valve


The main function of the absorption filter is to absorb smells, odors and taste from compressed air, making it suitable and comfortable for breathing.

This degree of filtration also offers other benefits including virtually oil free air, making it extremely appropriate for applications such as high quality painting, glass manufacturing and laser cutting, when used with the correct air drying process.

For breathing air, the absorption filter must be used in conjunction with other specified equipment, including the Infinity pre-filter, coalescing filter and dryers. This will ensure that air is at the correct quality and highest of standards. It is also recommended that all breathing air systems are regularly tested.

To select the correct size of filter for a particular application, choose on the basis of air flow and system pressure, rather than pipe size. Select a filter large enough to ensure that the air exits the filter at a low velocity.

The diagram below shows the absorption filtration process. As air enters the housing, it flows through the filter element from outside to in, during which the activated carbon in the element absorbs smells and odors from the compressed air. The air then exits the housing through the outlet port.

INLET FILTERED OUTLET

DRAIN

Functionality




DESCRIPTION G ф1 ф2 A B O-RINGIndustrial Filter Element 1/2” G 3/4” 31 42 94 76 25.8 x 2.65Industrial Filter Element 3/4” G 1” 38.5 52 128 104 30 x 3.55

Industrial Filter Element 1” G 1” 38.5 52 152 128 30 x 3.55Industrial Filter Element 1 1/2” G 1” 38.5 62 204 180 30 x 3.55Industrial Filter Element 2” - - 86 397 381 54.5 x 3.55Industrial Filter Element 2 1/2” - - 86 524 508 54.5 x 3.55

Industrial Pre-Filter ElementPre-filter elements are composed of fibrous materials which capture and remove fine, solid particles such as dust, pollen, mold and bacteria from the air. As the air flows through the filter element from inside to out, dust particles and condensate are removed and collected at the bottom of the bowl where they are ejected automatically by the auto drain system.

DESCRIPTION G ф1 ф2 A B O-RINGCoalescing Elements 1/2" G 3/4” 31 42 94 76 25.8 x 2.65Coalescing Elements 3/4" G 1” 38.5 52 128 104 30 x 3.55

Coalescing Elements 1" G 1” 38.5 52 152 128 30 x 3.55Coalescing Elements 1 1/2" G 1” 38.5 62 204 180 30 x 3.55Coalescing Elements 2” - - 86 397 381 54.5 x 3.55Coalescing Elements 2 1/2” - - 86 524 508 54.5 x 3.55

Industrial Coalescing ElementThe coalescing filter element comprises of two parts, an inner and outer layer. The inner layer consists of a high-efficiency coalescing stage, while the outer layer is a coarser stage used for drainage. Any liquid aerosols or droplets are caught within the fine fibres of the inner layer, eventually accumulating to the extent that they are forced to the outer layer of the filter element and into the ‘bowl’ of the housing.

CODE DESCRIPTION FLOW RATEIN-E15P-320 Pre-Filter Elements 1/2" 35 cfmIN-E20P-320 Pre-Filter Elements 3/4" 70 cfmIN-E25P-320 Pre-Filter Elements 1" 105 cfmIN-E40P-320 Pre-Filter Elements 1 1/2” 210 cfmIN-E50P-320 Pre-Filter Elements 2” 630 cfmIN-E63P-320 Pre-Filter Elements 2 1/2” 840 cfm

CODE DESCRIPTION FLOW RATE CFMIN-E15C-130 Coalescing Elements 1/2" 35IN-E20C-130 Coalescing Elements 3/4" 70IN-E25C-130 Coalescing Elements 1" 105IN-E40C-130 Coalescing Elements 1 1/2" 210IN-E50C-130 Coalescing Elements 2” 630IN-E63C-130 Coalescing Elements 2 1/2” 840

3 Filtration rating: 5µm 3Maximum temperature: 65˚C 3Maximum pressure: 232 psi

3 Filtration rating: 0.01µm 3Maximum temperature: 65˚C 3Maximum pressure: 232 psi

Features

Features

Specs

Specs

Technical Specs

Technical Specs



DESCRIPTION G ф1 ф2 A B O-RINGAbsorption Elements 1/2" G 3/4” 31 42 94 76 25.8 x 2.65Absorption Elements 3/4" G 1” 38.5 52 128 104 30 x 3.55

Absorption Elements 1" G 1” 38.5 52 152 128 30 x 3.55Absorption Elements 1 1/2” G 1” 38.5 62 204 180 30 x 3.55Absorption Elements 2” - - 86 397 381 54.5 x 3.55Absorption Elements 2 1/2” - - 86 524 508 54.5 x 3.55

Industrial Absorption ElementIndustrial absorption elements offer the final stage of filtration. As the air flows through the element from outside to in, the activated carbon in the element absorbs smells and odors from the compressed air system, making it suitable and comfortable for breathing.

CODE DESCRIPTION FLOW RATE CFMIN-E15A-150 Absorption Elements 1/2" 35IN-E20A-150 Absorption Elements 3/4" 70IN-E25A-150 Absorption Elements 1" 105IN-E40A-150 Absorption Elements 1 1/2” 210IN-E50A-150 Absorption Elements 2” 630IN-E63A-150 Absorption Elements 2 1/2” 840

3 Filtration rating: 0.01µm 3Maximum temperature: 65˚C 3Maximum pressure: 232 psi

Features

Specs

Technical Specs


INFINITY FILTRATIONFILTERS, REGULATORS & LUBRICATORS

OFR Filter RegulatorThe Infinity OFR combines a filter and a regulator in a single unit. It works to both clean the compressed air of fluid, oil, condensation and dirt particles, and to maintain constant operating pressure despite fluctuation in line pressure and the amount of air consumed.

Its 16 bar pressure rating makes the OFR filter regulator a perfect compliment to the Infinity aluminium pipe.

CODE SIZE DESCRIPTION RATED FLOW (L/MIN) PORT SIZE MAX PRESSURE PSI MAX CONDENSATE CAPACITY MAX TEMP

IN-FR2000-1/4 MINI OFR Filter Reg Mini 1/4” 1400 1/4

16 bar

22ml

0 - 60°C

IN-FR3000-1/4MIDI

OFR Filter Reg Midi 1/4” 3000 1/443ml

IN-FR3000-1/2 OFR Filter Reg 1/2” 3400 1/2

IN-FR5000-3/4MAXI

OFR Filter Reg 3/4” 9000 3/480ml

IN-FR5000-1 OFR Filter Reg 1” 10000 1

3 Pipe mounting or foot mounting 3 Complete with gauge and bracket 3 Grade of filtration: 40µm

Features

Specs


INFINITY FILTRATIONFILTERS, REGULATORS & LUBRICATORS

NO. DENOMINATION MATERIAL1 Pressure knob POM2 Regulator cap POM3 Regulator nut S35C4 Adjusting spindle S35C5 Pressure spring SWC6 Fixed ring 6061-T67 One part of membrane PA6+G158, 11, 17, 25, 28, 31 O-ring NBR

9 Flange IN Zinc alloy10 Spool Brass12 Whirlwind impeller POM13 Filter element PE14 Manger POM15 Metal bowl guard Aluminium alloy16 Filter bowl PC18 Inner joint POM19 Condensate drain POM20 Wearing sheet Insulation sheet21 OR sheet NBR22 Overflow base 6061-T623 One part of diaphragm SPCC24 Diaphragm NBR26 OR body Zinc alloy27 Plug POM29 Flange OUT Zinc alloy30 Allen screw S35C32 Spring SWPB33 Fasteners Brass34 Filter element base POM

Dimensional drawings

Structural diagram - main parts

SIZE E3 E4 E5 E6 E8 E9 F1MINI 40 39 76 95 64 52 1/4”MIDI 55 47 93 112 85 70 1/4”, 1/2”MAXI 66 53 104 124 96.1 80.9 3/4”, 1”

SIZE F2 F3 F4 F5 F6 L1 L2MINI M36*1.5 31 M4 4.5 40 44 35MIDI M52*1.5 50 M5 5.5 52 71 60MAXI M36*1.5 31 M5 5.5 63 71 60

SIZE L3 H1 H3 H4 H5 H6MINI 11 194 69 17.5 20 15MIDI 22 250 98 24.5 32 15MAXI 22 252 80 24.5 32.4 15


INFINITY FILTRATION

OR RegulatorIn all pneumatic systems, the pressure of the air can fluctuate. This is normally caused by air being exhausted from the compressor tank into the system, or when the tank is replenished by the compressor.

The OR regulator maintains constant operating pressure in the system, despite fluctuation in line pressure and air consumption, and offers various range settings allowing the pressure to be adjusted to the required level.

The Infinity OR regulator offers a 16 bar maximum pressure rating, making it a perfect compliment to the Infinity aluminium pipe, and is available in a tamper proof option. It features a diaphragm type structure and pipe or bracket mounting, and is best used in conjunction with the Infinity OF filter.

FILTERS, REGULATORS & LUBRICATORS


IN-R2000-1/4 MINI OR Regulator Mini 1/4” 1500 1/4

16 bar 0 - 60°C 0 - 60°C

IN-R3000-1/4MIDI

OR Regulator Midi 1/4” 3000 1/4

IN-R3000-1/2 OR Regulator Midi 1/2” 3500 1/2

IN-R5000-3/4MAXI

OR Regulator Maxi 3/4” 11000 3/4

IN-R5000-1 OR Regulator Maxi 1” 11500 1

Specs

3 Pipe mounting or foot mounting 3 Complete with gauge and bracket

Features


INFINITY FILTRATION

SIZE E3 E4 E5 E6 E8 E9 F1 F2 F3MINI 40 39 76 95 64 52 1/4” M36*1.5 31MIDI 55 47 93 112 85 70 1/4”,

1/2”M52*1.5 50

MAXI 66 53 104 124 96.12 80.91 3/4”, 1”

M36*1.5 31

SIZE F4 F5 F6 L1 L2 L3 L4 H3 H4 H7MINI M4 4.5 40 44 35 11 Max.3 69 17.5 96MIDI M5 5.5 52 71 60 22 Max.5 98 24.5 96MAXI M5 5.5 63 71 60 22 Max.4 80 24.5 96

NO. DENOMINATION MATERIAL1 Pressure knob POM2 Regulator cap POM3 Regulator nut S35C4 Adjusting spindle S35C5 Pressure spring SWC6 Fixed ring 6061-T67 One part of membrane NBR8 O-ring NBR9 Flange IN Zinc alloy10 Spool BRass11 O-ring NBR12 O-ring NBR13 Fasteners Brass14 Locker cover Zinc alloy15 Wearing sheet Insulation sheet16 OR Sheet NBR17 Overflow base 6061-T618 One part of diaphragm SPCC19 Diaphragm NBR20 O-ring NBR21 OR body Zinc alloy22 Plug POM23 O-ring NBR24 Flange OUT Zinc alloy25 Allen screw S35C26 Spring SWPB





INFINITY FILTRATION

OF FilterAlmost any pneumatic system will function better and for a longer period with properly conditioned air. In fact, many system components, such as air cylinders and motors, may be vulnerable to significant damage from dirty or un-lubricated air.

The Infinity OF filter, complete with water separator, removes fluid, oil, condensation and dirt particles from the air stream to protect downstream equipment from contamination.

As air enters the filter, internal baffles create a swirling motion in the air so that dirt and liquids are thrown against the sides of the filter bowl.

While other filters on the market normally consist of a piston style system, the OF filter features a diaphragm, resulting in a larger internal area and more control.

A market leading product, the OF filter offers a 16 bar maximum pressure rating, making it a perfect compliment to the Infinity aluminium pipe.


3 Sintered filter with water separator 3 Pipe mounting or foot mounting 3 Comes with bracket 3 Grade of filtration: 40µm

Features


IN-F2000-1/4 MINI OF Filter Mini 1/4” 1200 1/4

16 bar

22ml

0-6O˚C

IN-F3000-1/4MIDI

OF Filter Midi 1/4” 2500 1/443ml

IN-F3000-1/2 OF Filter Midi 1/2” 3000 1/2

IN-F5000-3/4MAXI

OF Filter Maxi 3/4” 5000 3/480ml

IN-F5000-1 OF Filter Maxi 1” 5300 1

Specs


INFINITY FILTRATION

SIZE L1 L2 L3 H4 H5 H6 H8 H9MINI 44 35 11 17.5 20 15 144 129MIDI 71 60 22 24.5 32 15 179 156MAXI 71 60 22 24.5 32.40 15 203 175

SIZE E3 E4 E7 E8 E9 F1 F4 F5MINI 40 39 2 64 52 1/4” M4 4.5

MIDI 55 47 3 85 70 1/4”, 1/2” M5 5.5

MAXI 66 53 3 96.116 80.91 3/4”, 1” M5 5.5

NO. DENOMINATION MATERIAL1 Ornament cover (round) POM2 O-ring NBR3 Flange - IN Zinc alloy4 Filter element base POM5 Whirlwind impeller POM6 Filter element PE7 Manger POM8 Metal bowl guard Aluminium alloy9 Filter bowl PC10 O-ring NBR11 Inner joint POM12 Condensate drain POM13 OF body Zinc alloy14 Flange - OUT Zinc alloy15 O-ring NBR16 Plug POM17 O-ring NBR18 Allen screw S35C





INFINITY FILTRATION

OL LubricatorMany components in a pneumatic system must be lubricated, especially ones with moving parts.

The Infinity OL lubricator is a direct constant-density lubricator that adds regulated quality oil to the compressed air, using a valve to keep oil mist content proportional to the compressed air flow. The oil drip rate is controlled by means of the regulating screw, for which 1 to 12 drops/1000L air is usually sufficient.

The OL lubricator offers a 16 bar maximum pressure rating, making it a perfect compliment to the Infinity aluminium pipe, and is best used in conjunction with the Infinity OF filter and OR regulator.


3 Pipe mounting or foot mounting 3 Complete with gauge and bracket

Features


IN-L2000-1/4 MINI OL Lubricator Mini 1/4” 2300 1/4

16 bar

22ml

0 - 60°C

IN-L3000-1/4MIDI

OL Lubricator Midi 1/4” 5000 1/443ml

IN-L3000-1/2 OL Lubricator Midi 1/2” 6100 1/2

IN-L5000-3/4MAXI

OR Regulator Maxi 3/4” 8400 3/480ml

IN-L5000-1 OR Regulator Maxi 1” 9000 1

Specs


INFINITY FILTRATION

SIZE L1 L2 L3 H4 H5MINI 44 35 11 17.5 20MIDI 71 60 22 24.5 32MAXI 71 60 22 24.5 32.40

NO. DENOMINATION MATERIAL1 Upper glass PC2 Adjust screw Brass3 O-ring NBR4 Ornament cover (circular) PO5 Windshield chip NBR6 Windshield base Brass7 Flange - IN Zinc alloy8 O-ring NBR9 O-ring NBR10 Metal bowl guard Aluminium alloy11 Lubricator bowl PC12 Oil-filter plug Brass powder sintered13 O-ring NBR14 Screw base Brass15 Oil dropping PC16 Seal piece NBR17 OL Body Zinc alloy18 Flange OUT Zinc alloy19 Allen screw S35C20 Bleeder screw POM21 O-ring NBR22 Valve pin Brass23 Double-end bolt SUS24 Steel ball SUS30425 Oil tube connection POM26 Oil tube PU

SIZE E3 E4 E7 F1 F4 F5MINI 40 39 2 1/4” M4 4.5MIDI 55 47 3 1/4”, 1/2” M5 5.5MAXI 66 53 3 3/4”, 1” M5 5.5





INFINITY FILTRATION

OU Filter Regulator LubricatorThe Infinity OU consists of an OFR filter regulator and an OL lubricator, making it the perfect all in one package for a compressed air system.

The OF filter with water separator cleans the compressed air of fluid, oil, condensation and dirt particles, while the OR regulator maintains constant operating pressure despite fluctuation in line pressure and the amount of air consumed. Meanwhile, the OL lubricator works to add regulated quality oil to the filtered air.

It’s 16 bar pressure rating makes the OU filter regulator lubricator a perfect compliment to the Infinity aluminium pipe.


3 Pipe mounting or foot mounting 3 Complete with gauge and bracket 3 Grade of filtration: 40µm

Features


IN-FLR2000-1/4 MINI OU Filter Reg Lubricator 1/4” 1/4” 40µm 0.5...12bar 22ml -

Specs


INFINITY FILTRATION

SIZE E1 E2 E3 E4 E5 E6 E7MINI 104 92 40 39 76 95 2

NO. DENOMINATION MATERIAL1 Flange IN Zinc alloy2 Filter + Regulator -3 Lubricator -4 Flange OUT Zinc alloy5 Bracket SPCC6 Allen screw S35C7 Pressure gauge -

SIZE L2 L3 H1 H2 H3 H4 H5 H6MINI 35 11 194 169 69 17.5 20 15

SIZE F1 F2 F3 F4 F5 F6 L1MINI 1/4” M36*1.5 31 M4 4.5 40 44





INFINITY FILTRATION

Features

OIL/WATER SEPARATORS

Oil/Water SeparatorsThe Infinity Sepremium range of oil/water separators separates oil from condensate, generated by compressed air systems. As condensate flows into the Sepremium, the oil is filtered out through various filtration elements.

The first oil adsorbing element has a clever saturation indicating feature, offering you a visual operating status of the separator at a distance. The elements are designed to combine various types of adsorption technologies to achieve less than 10 ppm oil residue values at the output stage.

Final separation stage includes specially selected activated carbon to polish out the remaining contaminants.

3 High performance elements applied. 3 Simple installation and maintenance procedures. 3 Successful separation of mineral oil and synthetic lubricants. 3 Fixing bracket included. 3 Visual element life indication. 3 Lighter and easier replacement of elements. 3 Sectional draining options during servicing. 3Multiple condensate inlets. 3 Sample bottle and test drain for sample taking.

Features and benefits

MODEL SEPREMIUM2

MODEL SEPREMIUM2 PG (Suitable to use with Polyglycol based lubricants)

MAX OIL ADSORPOTION 2LINLET CONNECTIONS 1/2"OUTLET CONNECTIONS 1/2"HOUSING MATERIAL ABSHOUSING COLOUR BlackLID COLOUR GreyMAX COMPRESSOR CAPACITY 2m3/min OR 70cfm

Infinity Sepremium 2

1/2" inlet connection

1/2" outlet connection

Holding bracket

Product dimensions - SEPREMIUM2 Product dimensions - SEPREMIUM5, 10, 20 & 30

FRONT VIEW SIDE VIEW TOP VIEW

A

B

C

D

E

FRONT VIEW SIDE VIEW

A

B C

D

A B C D255 mm 239 mm 212 mm 70 mm


INFINITY FILTRATIONOIL/WATER SEPARATORS


MODEL SEPREMIUM5


MAX OIL ADSORPOTION 5LINLET CONNECTIONS 1/2" (2)OUTLET CONNECTIONS 1"HOUSING MATERIAL PEHOUSING COLOUR BlackLID COLOUR Dark greyMAX COMPRESSOR CAPACITY 5m3/min OR 175cfm

Features

Visual element life indication

Multi inlet adapter

Easy replacement of elements


MODEL SEPREMIUM10



Features


Drains for easy maintenance


A D E580 mm 610 mm 190 mm

A B C D E650 mm 191 mm 470 mm 750 mm 240 mm


INFINITY FILTRATION


MODEL SEPREMIUM20




MODEL SEPREMIUM30



Features




Features






OIL/WATER SEPARATORS

55

INFINITY PIPE SYSTEMS

TECHNICAL CHARACTERISTICS 56INSTALLATION GUIDE 59PIPE & FITTINGS 62DROP LEG PACKAGES 76


INFINITY PIPE SYSTEMSTECHNICAL CHARACTERISTICS

AIR

AIR

H2 O

H2 O

PATENTED

ALUMINIUMPLASTIC

Outer Diameter

40

ACTUAL SIZE COMPARISONS

Infinity Zero Condensate TeeOne of the many technologically advanced features of the Infinity system is the zero condensate swan neck fitting.

It’s an innovative solution that completely removes the need for a conventional swan neck and drain valves, providing a quick and easy solution to the problem of condensate. This efficient internal system allows the fluid to reach its destination without any damaging condensation reaching equipment.

Condensation stays within the ring main and can be drained off at the most convenient point. The internal geometric shape means it can be used vertically or horizontally.

Size for Size There is no ComparisonWhen you compare the internal diameter of the Infinity aluminium pipe system with galvanised and plastic pipe of the same outside diameter, you’ll find that there is one big advantage.

Even though Infinity aluminum pipe has a much thinner wall than that of plastic pipe, it is naturally stronger and more rigid.

Because of this, the thinner walls provide a much larger internal diameter. This larger bore results in far greater flow and reduced pressure drop for the same outside diameter as plastic pipe.

The table to the left shows aluminium’s huge advantage in bore size compared to the bore size in plastic pipes of the same outside diameter.

In fact, aluminium bore size is so much larger that in most cases you can use the next size down of Infinity pipe and still achieve the same or better flow as plastic.

PLASTIC ALUMINIUMOUTER

DIAMETERINNER

DIAMETEROUTER

DIAMETERINNER

DIAMETER20 14 20 17

25 18 25 23

32 23 32 29

40 29 40 37

50 36 50 46

63 45 63 59

90 65 N/A N/A

110 79 110 106



1 Fittings of 20 - 25 - 32 - 40 are pre-assembled. Tubes of 6m are pre-coated, calibrated and deburred.

1 6

7

2

5

4 3

PUSH-IN 20 - 25 - 32 - 40 - 50 - 63

1 Nut made in nickel-plated brass

2 Seal made in NBR

3 Clamping washer made in Inox AISI 304

4 O-RING seals made in NBR

5 Safety ring made in technopolymeric

6 Body made in nickel-plated brass

7 Extruded aluminium tube calibrated and powder coated

INSTALLATION 20 - 25 - 32 - 40

INSTALLATION 50 - 63TEMPERATURES

MINIMUM -20˚C

MAXIMUM +80˚C

PRESSURES

MINIMUM -0.99 bar (0.099 Mpa)

MAXIMUM 15 bar (1.5 Mpa)

COMPATIBLE FLUIDS

Compressed air

Vacuum

Inert Gas (AZOTO, ARGON, NITROGEN)

FIRE RESISTANCE

The system does not stoke or propagate any fires

THREADS

Male threads taper in conformity with ISO

Female threads in conformity with ISO 228

TECHNICAL CHARACTERISTICS TO THE TUBES

EXTRUDED ALUMINIUM UNI 9006/1 Al Mg 0.5 Si 0.4 Fe 0.2

DESIGNATIONS UNI EN 573-3 EN AW 6060 T6

SURFACE TREATMENT Electrostatic painting

SPECIFIC WEIGHT 2.70 Kg/dm3

EXPANSION COEFFICIENT 0.024mm/(m °C)

2 Push tube into the fitting for automatic connection.

DIAMETER TORQUE20 300 cN.m

25 300 cN.m

32 400 cN.m

40 650 cN.m

3 In case of fitting disassembling, use the torques as in the chart to re-assemble the fitting.

1 Fittings of 50 – 63 are pre-assembled with nut untwisted to help tube connection. Tubes of 6m are pre-coated, calibrated and deburred.

DIAMETER TORQUE50 75 N.m

63 75 N.m

2 Push tube into the fitting for connection and tighten the nut using torques settings as in the chart.



1 8

23

4

7

9

65

1

2

34

PUSH-IN 110 INSTALLATION 110

TUBE CONNECTIONThe correct connection of tube is confirmed by the position of the arrow pre-stamp. If you need to cut the tube, mark the distance of tube to insert in the fitting.

1 Nut made in aluminium with proper surface treatment

2 O-RING Seal made in NBR

3 Body made in aluminium with proper surface treatment

4 Safety ring made in technopolymeric

5 Clamping washer made in compliance with AISI 301

6 Tube-guide ring made in technopolymeric

7 Selflocking nut in zinc-plated steel

8 TCEI screw in zinc-plated steel

9 Extruded aluminium tube calibrated and powder coated

TEMPERATURESMINIMUM -20˚C

MAXIMUM +80˚C

PRESSURES

MINIMUM -0.99 bar (0.099 Mpa)

MAXIMUM 15 bar (1.5 Mpa)

COMPATIBLE FLUIDS

Compressed air

Vacuum

Inert Gas (AZOTO, ARGON, NITROGEN)

FIRE RESISTANCE

The system does not stoke or propagate any fires

THREADS

Male threads taper in conformity with ISO

Female threads in conformity with ISO 228

TECHNICAL CHARACTERISTICS TO THE TUBES

EXTRUDED ALUMINIUM UNI 9006/1 Al Mg 0.5 Si 0.4 Fe 0.2

DESIGNATIONS UNI EN 573-3 EN AW 6060 T6

SURFACE TREATMENT Electrostatic painting

SPECIFIC WEIGHT 2.70 Kg/dm3

EXPANSION COEFFICIENT 0.024mm/(m °C)

1 Fittings of 110 are pre-assembled with four screws untwisted to help tube connection. Tubes of 6m are pre-coated, calibrated and deburred.

2 Push tube into the fitting for automatic connection and screw up in the suggested sequence. Tightening torque 30Nm.

DIAMETER LENGTH20 31.5mm

25 38.5mm

32 46mm

40 52mm

50 63.5mm

63 75.5mm

110 125.5mm


INFINITY PIPE SYSTEMSINSTALLATION GUIDE

Determining the Diameter for InstallationThe diagram below allows you to determine the diameter of the main line.

3 Choose the flow rate of compressor in the red column. 3 Choose the distance between compressor and the most distant using point in the blue column. 3 Cross the lines of flow rate and blue column of distance to choose the diameter.

FLOW RATE DISTANCE FROM COMPRESSOR TO FURTHEST OUTLET

NL/MIN NM3/H CFM 25M 50M 100M 150M 200M 300M 400M 500M 1000M 1500M 2000M

230 14 8 20 20 20 20 20 20 20 20 25 25 25

650 39 23 20 20 20 20 25 25 25 25 32 32 32

900 54 32 20 20 20 25 25 25 32 32 32 40 40

1200 72 42 20 20 25 25 25 32 32 32 40 40 40

1750 105 62 20 25 25 32 32 32 32 40 40 50 50

2000 120 71 20 25 32 32 32 32 40 40 40 50 50

2500 150 88 25 25 32 32 32 40 40 40 50 50 50

3000 180 106 25 32 32 32 40 40 40 40 50 50 50

3500 210 124 25 32 32 40 40 40 40 50 50 63 63

4500 270 159 32 32 40 40 40 50 50 50 63 63 63

6000 360 212 32 40 40 40 50 50 50 63 63 63 63*

7000 420 247 32 40 40 50 50 50 63 63 63 63* 110

8500 510 300 40 40 50 50 50 63 63 63 63* 110 110

12000 720 424 40 50 50 63 63 63 63 110 110 110 110

15000 900 530 40 50 63 63 63 63 63* 110 110 110 110

18000 1080 636 50 50 63 63 63 110 110 110 110 110 110

21000 1260 742 50 63 63 63 63* 110 110 110 110 110 110*

26000 1560 918 50 63 63 63* 110 110 110 110 110 110* 110*

31000 1860 1095 63 63 63* 110 110 110 110 110 110 110* 110*

33000 1980 1165 63 63 110 110 110 110 110 110 110* 110* 110*

44000 2640 1554 63 63* 110 110 110 110 110 110 110* 110* 110*

50000 3000 1766 63 110 110 110 110 110 110 110* 110* 110* 110*

58000 3480 2048 63 110 110 110 110 110 110* 110* 110* 110* 110*

67000 4020 2366 63* 110 110 110 110 110* 110* 110* 110* 110* 110*

75000 4500 2648 110 110 110 110 110 110* 110* 110* 110* 110* 110*

83000 4980 2931 110 110 110 110 110* 110* 110* 110* 110* 110* 110*

92000 5520 3249 110 110 110 110* 110* 110* 110* 110* 110* 110* 110*

100000 6000 3531 110 110 110 110* 110* 110* 110* 110* 110* 110* 110*

Pressure 7 bar - Total pressure drop 4% * Pressure drop is higher than 4%

Features Pressure DropFlow rate: 1750 NL/min Distance from compressor to furthest outlet: 300mTube diameter: 32

Every low pressure pipe has a certain resistance to the flowing fluid. This resistance is related to the inner surface of the pipe, its internal diameter, the flow velocity, and to the overall length of pipe. The following page will help you keep your pressure drop to a minimum.



Distance between the compressor and the furthest outlet

The most overlooked area in piping layout and design is the velocity of the compressed fluid. Under-sizing the internal diameter of the pipe relevant to the flow required will increase the velocity.

So what is wrong with high velocity? The fluid is just getting there faster. This is true, but what happens when the fluid runs into a valve or crossing tee? All this energy creates high turbulence and therefore significant back pressure. These actions can have a very negative impact on your low pressure system’s performance and running costs.

High velocity (under sizing the pipe system) can be a significant cause of:

3 Erratic pressure control 3 Turbulence in the pipe system 3 Pressure drop 3 Extra power requirements at the compressor

LAMINAR FLOW

TURBULENT FLOW

COMPRESSOR

COMPRESSOR

OUTLET

OUTLET

Distance From Compressor to Furthest Outlet

Ring Main System

Linear System



ΔL = ΔT x L x α

To calculate the linear expansion-shrinkage, we can use the following formula:

The installation should be positioned with free space at the ends to allow for expansion-shrinkage. Supports should be fixed as shown in the image opposite.

6M

3M

2M

2M

1M

1M

ΔL Linear expansion-shrinkage in mm

ΔT Heat variation between the operating temperature and the installation one at oC

L Tube length in M

α Linear expansion factor, for the aluminium it is 0.024mm/M oC

1816141210

86420-20 -10 0 10 20 30 40 50 60

TEMPERATURE (OC)

Infinity aluminium pipe

Conventional plastic pipe

PRES

SURE

(BAR

)

Expansion and Shrinkage Due to Heat

Collar Positions - 6m Tube

Maximum working pressure versus operating temperature


INFINITY PIPE SYSTEMSPIPE & FITTINGS

Technical Characteristics Pertinent to the Tubes

MAX PRESSURE 15 Bar WORKING TEMPERATURE RANGE -20 °C to 80 °C (Fire tested in accordance with UNI EN 13501-1:2005)UV EFFECT NONEEXTRUDED ALUMINIUM UNI 9006/1 Al Mg 0.5 Si 0.4 Fe 0.2CHEMICAL COMPOSITION Si: 0.3 ÷ 0.6 - Mg: 0.35 ÷ 0.6 - Fe: 0.10 ÷ 0.30DESIGNATIONS UNI EN 573 - 3 EN AW 6060HEAT TREATMENT / MELTING POINT DRAINED “16” / 600°CSURFACE TREATMENT Electrostatic paintingSPECIFIC WEIGHT / RESISTANCE 2.70 Kg/dm3 / 3.25 μΩ cmTHERMAL CONDUCTIVITY 1.75 W/(cm °K)EXPANSION COEFFICIENT 0.024mm/(m °C)SPECIFIC HEAT AT 100°C 0.92 J/(g °K)BEARING TENSILE STRESS 205 N/mm2

COEFFICIENT OF ELASTICITY 66000 N/mm2

PROPORTIONALITY DEVIATION LOAD 165 N/mm2

BRINEL HARDNESS 60 ÷ 70 HBCHEMICAL TREATMENT Fluorine-Zirconium - prevents corrosion from acid condensing water & sticks like a film on the internal surface of the tube.EXTERNAL COATING / INTERNAL COATING Epoxypolyester Powder / Chemically treated with fluorine-zirconium.QUALITY FEATURES UV resistant and fire tested in accordance with UNI EN 13501-1:2005

CODE ALT CODE DESCRIPTION MAX FLOW RATE (CFM) (25M, @7BAR)IN20X6M 900006 20 Aluminium Pipe 20mm x 6m 71

IN25X6M 900006 25 Aluminium Pipe 25mm x 6m 124





Aluminium Air Pipe

CODE ALT CODE DESCRIPTION MAX FLOW RATE (CFM) (25M, @7BAR)IN20X6G 900006 20 G Aluminium Pipe 20mm x 6m 71

IN25X6G 900006 25 G Aluminium Pipe 25mm x 6m 124





Aluminium Nitrogen Pipe

CODE ALT CODE DESCRIPTION MAX FLOW RATE (CFM) (25M, @7BAR) INV20X6M 900006GR 20 Aluminium Pipe 20mm x 6m 71

INV25X6M 900006GR 25 Aluminium Pipe 25mm x 6m 124





Aluminium Vacuum Pipe

CODE ALT CODE DESCRIPTION MAX FLOW RATE (CFM) (25M, @7BAR)IN110X6M 900006 110 Aluminium Pipe 110mm X 6m 3531

110mm Aluminium Air Pipe


INFINITY PIPE SYSTEMSPIPE & FITTINGS

CODE ALT CODE DESCRIPTIONINMA2012 90010 20-½ Straight Male Adapter 20mm x ½”

INMA2520 90010 25-¾ Straight Male Adapter 25mm x ¾”

INMA3225 90010 32-1 Straight Male Adapter 32mm x 1”

INMA4032 90010 40-1¼ Straight Male Adapter 40mm x 1¼”

INMA5040 90010 50-1½ Straight Male Adapter 50mm x 1½”

INMA6350 90010 63-2 Straight Male Adapter 63mm x 2”

CODE ALT CODE DESCRIPTIONINC20 90040 20 Straight Coupling 20mm INC25 90040 25 Straight Coupling 25mm INC32 90040 32 Straight Coupling 32mm INC40 90040 40 Straight Coupling 40mm INC50 90040 50 Straight Coupling 50mm INC63 90400 63 Straight Coupling 63mm

CH1

CH2B

L

A

F

D

E

TECHNICAL SPECSD F A B E L CH1 CH220 1/2 14 31.5 34.5 56 22 3025 3/4 16.5 38.5 42.5 66 27 3532 1 19 46 52 76.5 34 4540 1¼ 21.5 52 63 89.5 45 5550 1½ 21.5 63.5 73 92 50 6563 2 24 75.5 92 105 65 70

TECHNICAL SPECSD B C E L CH1 CH220 31.5 14.5 34.5 76.5 21 3025 38.5 13.5 42.5 90.5 26 3532 46 14.5 52 106.5 32 4540 52 21 63 125 41 5550 63.5 21.5 73 148.5 50 6563 75.5 25 92 176.5 65 70

TECHNICAL SPECSD F A B E L CH1 CH220 1/2 15 31.5 34.5 49 24 3025 3/4 16.5 38.5 42.5 56.5 32 3532 1 19 46 52 66.5 38 4540 1¼ 22 52 63 76 50 5550 1½ 22 63.5 73 85.5 55 6563 2 22 75.5 92 99.5 65 70

Straight Male Adapter

CODE ALT CODE DESCRIPTIONINFA2012 90030 20-½ Straight Female Adapter 20mm x ½”

INFA2520 90030 25-¾ Straight Female Adapter 25mm ¾”

INFA3225 90030 32-1 Straight Female Adapter 32mm 1”

INFA4032 90030 40-1¼ Straight Female Adapter 40mm 1¼”

INFA5040 90030 50-1½ Straight Female Adapter 50mm 1½”

INFA6350 90030 63-2 Straight Female Adapter 63mm 2”

Straight Female Adapter

L

AB

F

D

E

CH2

CH1

Straight Coupling

BL C

D

E

CH2

CH1



CODE ALT CODE DESCRIPTIONINEC20 90140 20 1350 Connector 20mm INEC25 90140 25 1350 Connector 25mm INEC32 90140 32 1350 Connector 32mm INEC40 90140 40 1350 Connector 40mm INEC50 90140 50 1350 Connector 50mm INEC63 90140 63 1350 Connector 63mm

TECHNICAL SPECSD B C E L CH1 CH220 31.5 12.5 34.5 44 21 3025 38.5 13.5 42.5 52 26 3532 46 15 52 61 34 4540 52 18 63 70 41 5550 63.5 20 73 83.5 50 6563 75.5 24 92 99.5 65 70

CODE ALT CODE DESCRIPTIONINE20 90130 20 Elbow Connector 20mm INE25 90130 25 Elbow Connector 25mm INE32 90130 32 Elbow Connector 32mm INE40 90130 40 Elbow Connector 40mm INE50 90130 50 Elbow Connector 50mm INE63 90130 63 Elbow Connector 63mm

CODE ALT CODE DESCRIPTIONINEM20 90150 20-1/2 Male Elbow Connector 20mm INEM25 90150 25-3/4 Male Elbow Connector 25mm INEM32 90150 32-1 Male Elbow Connector 32mm INEM40 90150 40-1 1/4 Male Elbow Connector 40mm INEM50 90150 50-1 1/2 Male Elbow Connector 50mm INEM63 90150 63-2 Male Elbow Connector 63mm

TECHNICAL SPECSD F A B C E L L1 CH1 CH220 1/2 13 31.5 19 34.5 51 32 21 3025 3/4 14.5 38.5 23 42.5 61.5 37 26 3532 1 16.5 46 28 52 74.5 49 34 4540 1¼ 20 52 34 63 86.5 54 41 5550 1½ 22 63.5 40.5 73 104 59 50 6563 2 21.7 75.5 52 92 127.5 71 65 70

TECHNICAL SPECSD B C E L CH1 CH220 31.5 19 34.5 51 21 3025 38.5 23 42.5 61.5 26 3532 46 28 52 74.5 34 4540 52 34 63 83.5 41 5550 63.5 40.5 73 104 50 6563 75.5 52 92 127.5 65 70

135˚ Connector

C

E

D

LB

CH2

CH1

45°

Elbow Connector

ED

C B

L

CH1

CH2

Male Elbow Connector

CH1

CH2

CB

L

A

L1

F

DE

PIPE & FITTINGS



CODE ALT CODE DESCRIPTIONINEF20 90160 20-1/2 Female Elbow Connector 20mm INEF25 90160 25-3/4 Female Elbow Connector 25mm INEF32 90160 32-1 Female Elbow Connector 32mm INEF40 90160 40-1 1/4 Female Elbow Connector 40mm INEF50 90160 50-1 1/2 Female Elbow Connector 50mm INEF63 90160 63-2 Female Elbow Connector 63mm

CODE ALT CODE DESCRIPTIONINTF20-3/8 90236 20-3/8 Female Tee Connector 20 X 3/8”INTF20-1/2 90236 20-1/2 Female Tee Connector 20 X 1/2" INTF25-1/2 90236 25-1/2 Female Tee Connector 25 X 1/2" INTF25-3/8 90236 25-3/8 Female Tee Connector 25 X 3/8" INTF32-1/2 90236 32-1/2 Female Tee Connector 32 X 1/2" INTF40-1/2 90236 40-1/2 Female Tee Connector 40 X 1/2" INTF50-3/4 90236 50-3/4 Female Tee Connector 50 X 3/4" INTF63-3/4 90236 63-3/4 Female Tee Connector 63 X 3/4"

TECHNICAL SPECSD F A B C E L L1 CH1 CH220 1/2 13 31.5 19 34.5 51 32 21 3025 3/4 14.5 38.5 23 42.5 61.5 37 26 3532 1 16.5 46 28 52 74.5 49 34 4540 1¼ 20 52 34 63 86.5 54 41 5550 1½ 22 63.5 40.5 73 104 59 50 6563 2 21.7 75.5 52 92 127.5 71 65 70

TECHNICAL SPECSD F A B C E L1 L2 CH CH120 3/8 13.5 31.5 48 34.5 109 28 28 3020 1/2 11 31.5 48 34.5 109 25 28 3025 1/2 11 38.5 45.5 42.5 121.5 29 35 3525 3/8 13.5 38.5 45.5 42.5 121.5 31 35 3532 1/2 13.5 46 54.5 52 146.5 36..5 45 4540 1/2 13.5 52.5 60 63 165.5 41.5 55 5550 3/4 14.5 63.5 73.5 73 201 47.5 65 6563 3/4 14.5 77 86 92 237.5 55 80 70

AIR

AIR

H2 O

H2 O

CODE ALT CODE DESCRIPTIONINT20 90230 20 Tee Connector 20mm INT25 90230 25 Tee Connector 25mm INT32 90230 32 Tee Connector 32mm INT40 90230 40 Tee Connector 40mm INT50 90230 50 Tee Connector 50mm INT63 90230 63 Tee Connector 63mm

TECHNICAL SPECSD E B C1 C2 L1 L2 CH1 CH220 34.5 31.5 34.5 22.5 98 54.5 21 3025 42.5 38.5 37.5 26 113.5 65 26 3532 52 46 46.5 31.5 138.5 77 34 4540 63 52 55.5 38 159.5 90 41 5550 73 63.5 69 44.5 196 108 50 6563 92 75.5 87 55.5 238.5 131 65 70

Female Elbow Connector

CH1

CH2

CB

L

L1

A

F

D

E

Female Tee Connector

A F

L2

L1C

CH1CH

B

D E

Tee Connector

L1

L2

E

D

C2

C1 B

CH1

CH2

PIPE & FITTINGS



CODE ALT CODE DESCRIPTIONINRT2520 90235 25-20 Reducing Tee Connector 25 X 20mm INRT3220 90235 32-20 Reducing Tee Connector 32 X 20mm INRT3225 90235 32-25 Reducing Tee Connector 32 X 25mm INRT4020 90235 40-20 Reducing Tee Connector 40 X 20mm INRT4025 90235 40-25 Reducing Tee Connector 40 X 25mm INRT5020 90235 50-20 Reducing Tee Connector 50 X 20mm INRT5025 90235 50-25 Reducing Tee Connector 50 X 25mm INRT5032 90235 50-32 Reducing Tee Connector 50 X 32mm INRT6320 90235 63-20 Reducing Tee Connector 63 X 20mm INRT6325 90235 63-25 Reducing Tee Connector 63 X 25mm INRT6332 90235 63-32 Reducing Tee Connector 63 X 32mm

TECHNICAL SPECSD1 D2 B1 B2 C1 C2 E1 E2 L1 L2 CH CH1 CH225 20 38 31.5 45.5 27.5 42.5 34.5 121.5 59 35 35 3032 20 46 31.5 54.5 31.5 52 34.5 146.5 63 45 45 3032 25 46 38 54.5 31.5 52 42.5 146.5 70 45 45 3540 20 52.5 31.5 60 34.5 63 34.5 165.5 66 55 55 3040 25 52.5 38 60 34.5 63 42.5 165.5 87 55 55 3550 20 63.5 31.5 73.5 41.5 73 34.5 201 73 65 65 3050 25 63.5 38.5 73.5 41 73 42.5 201 80 65 65 3550 32 63.5 46 73.5 41 73 52 201 87.5 65 65 4563 20 77 31.5 86 49.5 92 34.5 237.5 81 80 70 3063 25 77 38.5 86 49 92 42.5 237.5 88 80 70 3563 32 77 46 86 49 92 52 237.5 95.5 80 70 45

CODE ALT CODE DESCRIPTIONINRU2520 90620 25-20 Reducing Union 25 X 20mm INRU3220 90620 32-20 Reducing Union 32 X 20mm INRU3225 90620 32-25 Reducing Union 32 X 25mm INRU4020 90620 40-20 Reducing Union 40 X 20mm INRU4025 90620 40-25 Reducing Union 40 X 25mm INRU4032 90620 40-32 Reducing Union 40 X 32mm INRU5032 90620 50-32 Reducing Union 50 X 32mmINRU5040 90620 50-40 Reducing Union 50 X 40mmINRU6340 90620 63-40 Reducing Union 63 X 40mmINRU6350 90620 63-50 Reducing Union 63 X 50mm

TECHNICAL SPECSD1 D2 B E1 E2 L CH1 CH225 20 31.5 43.5 34.5 48 42 3032 20 31.5 54 34.5 48.5 52 3032 25 38.5 54 42.5 55 63 3540 20 31.5 65 34.5 50 63 3040 25 38.5 65 42.5 56.5 63 3550 32 46 65 52 63.5 63 4550 32 46 65 52 63.5 63 4550 40 46 65 52 63.5 63 4563 40 46 65 52 63.5 63 4563 50 46 65 52 63.5 63 45

Reducing Tee Connector

Reducing Union

CHCH2

CH1

E2

L2

B2

D2

C2

D1

C1

L1

B1

E1

AIR

AIR

H2 O

H2 O

Remove the nut

Mount reducerINRU

D1

L

E1

D2E2

B CH2

CH1

PIPE & FITTINGS



CODE ALT CODE DESCRIPTIONINBV20 90700 20 Ball Valve Coupling 20mm INBV25 90700 25 Ball Valve Coupling 25mm INBV32 90700 32 Ball Valve Coupling 32mm INBV40 90700 40 Ball Valve Coupling 40mm INBV50 90700 50 Ball Valve Coupling 50mm INBV63 90700 63 Ball Valve Coupling 63mm

CODE ALT CODE DESCRIPTIONINBV20-1/2 90720 20-1/2 Ball Valve 20 X 1/2” INBV25-3/4 90720 25-3/4 Ball Valve 25 X 3/4”

TECHNICAL SPECSD DN B C E L CH1 CH2 G H20 17 31.5 58.5 34.5 121.5 32 30 88 4225 22 38.5 61.5 42.5 138.5 41 35 106 47.532 29 46 75 52 167 50 45 106 5340 37 52.5 81 63 186 59 55 134 6550 46 63.5 103 73 230 69 65 134 72.563 59 77 126 92 280 92 70 240 111.5

CODE ALT CODE DESCRIPTIONINP20 90610 20 Plug 20mm INP25 90610 25 Plug 25mm INP32 90610 32 Plug 32mm INP40 90610 40 Plug 40mm INP50 90610 50 Plug 50mm INP63 90610 63 Plug 63mm

TECHNICAL SPECSD L E CH220 33 34.5 3025 39 42.5 3532 46.5 52 4540 53 63 5550 68 73 6563 74.5 92 70

TECHNICAL SPECSD F DN A B C E L CH1 CH2 G H20 1/2 15 18 31.5 29.3 34.5 100.8 32 30 88 4225 3/4 20 18 38.5 30.8 42.5 119.3 41 35 106 47.5

Ball Valve Coupling

Ball Valve Tube to male thread BSP

Plug

L

E

CH2

D

PIPE & FITTINGS



CODE ALT CODE DESCRIPTIONINDLD20 90260 20 Drip Leg Drain 20mm INDLD25 90260 25 Drip Leg Drain 25mm INDLD32 90260 32 Drip Leg Drain 32mm INDLD40 90260 40 Drip Leg Drain 40mm INDLD50 90260 50 Drip Leg Drain 50mm INDLD63 90260 63 Drip Leg Drain 63mm

TECHNICAL SPECSD B E L1 L2 CH1 CH220 36 34.5 52.5 67 32 3025 38.5 42.5 57.5 72 32 3532 46 52 67.5 82 38 4540 52 63 77 91.5 50 5550 63.5 73 86.5 101 55 6563 75.5 92 100.5 115 65 70

CODE ALT CODE DESCRIPTIONINSCC3220 90240 32-20 Saddle Clamp Connector 32 X 20mm INSCC3225 90240 32-25 Saddle Clamp Connector 32 X 25mm INSCC4020 90240 40-20 Saddle Clamp Connector 40 X 20mm INSCC4025 90240 40-25 Saddle Clamp Connector 40 X 25mm INSCC5020 90240 50-20 Saddle Clamp Connector 50 X 20mm INSCC5025 90240 50-25 Saddle Clamp Connector 50 X 25mm INSCC6320 90240 63-20 Saddle Clamp Connector 63 X 20mm INSCC6325 90240 63-25 Saddle Clamp Connector 63 X 25mm

TECHNICAL SPECSD D1 B E F L1 L2 L3 L4 CH CH132 20 31.5 34.5 34 136.5 100.5 78 57 30 532 25 38.5 42.5 34 144.5 108.5 78 57 35 540 20 31.5 34.5 34 148.5 108 89.5 64 30 540 25 38.5 42.5 34 156.5 116 89.5 64 35 550 20 31.5 34.5 42.5 167.5 118.5 105.5 74 30 650 25 38.5 42.5 42.5 175.5 126.5 105.5 74 35 663 20 31.5 34.5 42.5 185 130 119 81 30 663 25 38.5 42.5 42.5 193 138 119 81 35 6

TECHNICAL SPECSD D1 F L1 L2 L3 L4 CH40 24.5 34 127 86.5 65 39.5 563 31.5 42.5 163.5 108.5 93 55 6

CODE ALT CODE DESCRIPTIONINSC32-40 90241 32-40 Tool For Saddle Clamp ConnectorINSC50-63 90241 50-63 Tool For Saddle Clamp Connector

Drip Leg Drain

CH2

CH1

L1

BD

E

L2

Saddle Clamp Connector

E

F

L2L1

B

CH1

D

D1

L4L3

CH

Tool for Saddle Clamp Connector

C

D2

L

D1

D

L1

PIPE & FITTINGS



CODE ALT CODE DESCRIPTIONINM20-1/2 90602 20-1/2 2 Way Manifold 20-1/2"INM25-1/2 90602 25-1/2 2 Way Manifold 25-1/2"

TECHNICAL SPECSD F B C E I CH1 CH2 L1 L2 LMIN LMAX20 1/2 31.5 20 34.5 28.5 26 30 27 51.5 37 5425 1/2 38 21 42.5 28.5 26 35 27 59 37 54

CODE ALT CODE DESCRIPTIONINLE2012 90600 20-1/2 Lugged Female Elbow 20mm X 1/2" INLE2520 90600 25-3/4 Lugged Female Elbow 25mm X 3/4" INLE3225 90600 32-1 Lugged Female Elbow 32mm X 1"

TECHNICAL SPECSD F B C E L1 L2 L3 LMAX LMIN CH1 CH220 1/2 31.5 19.5 34.5 35 51 35 40 22 21 30

25 3/4 38 23 42.5 37 62 39 40 22 26 3532 1 46 28 52 41 74.5 48.5 40 22 34 45

CODE ALT CODE DESCRIPTIONINDR32 90242-32 Drilling Rig For 32mmINDR40 90242-40 Drilling Rig For 40mmINDR50 90242-50 Drilling Rig For 50mmINDR63 90242-63 Drilling Rig For 63mm

TECHNICAL SPECSD D1 F L1 L2 L3 L4 CH32 24.5 34 115 79 56 35 632 24.5 34 127 86.5 65 39.5 640 31.5 42.5 146 97 76 47.5 640 31.5 42.5 163.5 108.5 93 55 6

Drilling Rig

CHF

L3L4

D D1

L2L1

Lugged Female Elbow

CH1

CH2

64Lm

axL3

50Lm

in

ED

20

L1L2

F

B C

Manifold

30,5

I

6174

5 F

D

L min

CB

L max

L1L2

Ø E

CH2

CH1

30,5

I

6174

5F

D

L min

C B

L max

L1 L2

ØE

CH2CH1

PIPE & FITTINGS



CODE ALT CODE DESCRIPTIONINM1/2-1/2 90642 1/2-1/2 2-Way Manifold 1/2 X 1/2"INM3/4-1/2 90642 3/4-1/2 2-Way Manifold 3/4 X 1/2"

TECHNICAL SPECSF1 F2 NO LMAX LMIN

1/2 1/2 2 40 223/4 1/2 2 40 22

CODE ALT CODE DESCRIPTIONINM4-1/2 90644-1/2 4-Way Manifold 1/2"- 1/2" INM4-3/4 90644-3/4 4-Way Manifold 3/4"- 1/2"

TECHNICAL SPECSF1 F2 NO LMAX LMIN

1/2 1/2 4 40 223/4 1/2 4 40 22

CODE ALT CODE DESCRIPTIONINM2 90647 1/2-3/8-2 2 Holes Manifold 1/2" X 3/8" INM3 90647 1/2-3/8-3 3 Holes Manifold 1/2" X 3/8"

TECHNICAL SPECSF1 F2 NO L1 LMAX LMIN

1/2 3/8 2 111.5 40 221/2 3/8 3 151.5 40 22

Manifold - 2 Way

28,5L max

L mi

n

F1

29,5

48,57387

72

5 F2

28,5L max

L mi

n

F1

29,5

48,57387

72

5 F2

Manifold - 4 Way

F1

77.5

48

7387

120

5

48,5

F2

28,5L max

L min

F1

77.5

48

7387

120

5

48,5

F2

28,5L ma

xL min

Manifold - Parallel Holes

PIPE & FITTINGS



CODE ALT CODE DESCRIPTIONINC110 90040 110 Coupling 110mm

TECHNICAL SPECSD B C E L CH1

110 125.5 4 200 255 8

CODE ALT CODE DESCRIPTIONIN110X6M 900006 110 Aluminium Pipe 110mm X 6m

CODE ALT CODE DESCRIPTIONINE110 90130 110 Elbow 110mm

TECHNICAL SPECSD B C E L CH1

110 125.5 75 200 200.5 8

110mm PipingThe 110mm diameter Infinity pipe and fittings are especially designed for heavy industrial uses. The range offers a high quality and durable piping system.

110mm Aluminium Air Pipe

110mm Coupling

CB

D

L

E

CH1

110mm Elbow

LC B

CH

DE

PIPE & FITTINGS



CODE ALT CODE DESCRIPTIONINTF110-3 90250 110-3/4 Zero Condensate Female Tee 110 X 3/4"

TECHNICAL SPECSD F A B C E L1 L2 CH1 CH2

110 3/4 14.5 125.5 150.5 200 401 180 8 42

CODE ALT CODE DESCRIPTIONINT110 90230 110 Tee 110mm

TECHNICAL SPECSD E B C1 C2 L1 L2 CH1

110 200 125.5 150.5 75 401 200.5 8

CODE ALT CODE DESCRIPTIONINTF110-3/4 90236 110-3/4 Female Tee 110 X 3/4" INTF110-1 90236 110-1 Female Tee 110 X 1" INTF110-11/2 90236 110-11/2 Female Tee 110 X 1 1/2" INTF110-2 90236 110-2 Female Tee 110 X 2"

TECHNICAL SPECSD F A B C E L1 L2 CH1 CH2

110 3/4 14.5 125.5 150.5 200 401 180 8 42110 1” 17 125.5 150.5 200 401 180 8 49110 1 ½” 20 125.5 150.5 200 401 180 8 66110 2” 22 125.5 150.5 200 401 180 8 80

110mm Tee

C1 B

C2D

L1

L2

E

CH

110mm Female Tee (zero condensate)

BC

FA

D

L1

L2

E

CH

CH1

AIR

AIR

H2 O

H2 O

110mm Female Tee

BC

FA

D

L1

L2

E

CH

CH1

PIPE & FITTINGS



CODE ALT CODE DESCRIPTIONINGAS110 90017 110 Flat Gasket 110mm

TECHNICAL SPECSD D1 D2 S

110 105 162 2

CODE ALT CODE DESCRIPTIONINP110 90610 110 Plug 110mm

TECHNICAL SPECSD L E

110 68 200

CODE ALT CODE DESCRIPTIONINFD110-3/4 90630 110-3/4 Female Reducer 110 X 3/4" INFD110-1 90630 110-1 Female Reducer 110 X 1" INFD110-11/2 90630 110-11/2 Female Reducer 110 X 1 1/2" INFD110-2 90630 110-2 Female Reducer 110 X 2"

TECHNICAL SPECSF A L CH

3/4 14.5 180 421” 17 180 49

1 ½” 20 180 662” 22 180 80

110mm Plug

D

E

L

110mm Female Reducer

F AL

CH

110mm Flat Gasket

D2D1

S

PIPE & FITTINGS



CODE ALT CODE DESCRIPTIONINBV110 90710 110 Butterfly Valve 110mm

TECHNICAL SPECSD DN A B C D E F

110 100 110 203 52 100 170 265

CODE ALT CODE DESCRIPTIONINFT110 90015 110 Flanged Tube 110mm

TECHNICAL SPECSD B E L D1 I

110 18 220 183 18 180

CODE ALT CODE DESCRIPTIONINTB110 90020 110 Tube 110mm 2 ½”INTB110 90020 110 Tube 100mm 3”*Hook wrench dimensions

TECHNICAL SPECSD A B L CH

110 2 ½” 22 178 *124110 3” 23 179 *125

110mm Butterfly Valve

BA

E

D

C

F

110mm Flanged Tube

E

B

D

L

D1 I

110mm Tube

= = =` e

_

^

i

a

PIPE & FITTINGS



CODE ALT CODE DESCRIPTIONINCO110 90820 110 Collar 110mm

CODE ALT CODE DESCRIPTIONINFK110 90019 110 Flange Kit 110mm - 60mm length

110mm Flange Kit

110mm Collar

TECHNICAL SPECSH A

M8/M10 81.5

PIPE & FITTINGS



QTY DESCRIPTION CODE(20) CODE(25)1 Pipe 6m IN20X6M IN25X6M1 Reducing tee INRT2520 INRT32251 Male adapter INMA2012 INMA25201 Manifold INM1/2-1/2 INM3/4-1/21 Coupling INCSM8 INCSM81 Coupling INCSM4 INCSM41 Lubricator IN-L2000-1/4 IN-L2000-1/41 Reducing nipple 73 1/2-1/4 73 1/2-1/42 Clips INCL20 INCL25

A20 / A25 B20 / B25

QTY DESCRIPTION CODE(20) CODE(25)1 Pipe 6m IN20X6M IN25X6M1 Reducing tee INRT2520 INRT32251 Male adapter INMA2012 INMA25201 Manifold INM1/2-1/2 INM3/4-1/21 Coupling INCSM8 INCSM81 Coupling INCSM4 INCSM41 Regulator IN-R2000-1/4 IN-R2000-1/41 Reducing nipple 73 1/2-1/4 73 1/2-1/42 Clips INCL20 INCL25

DROP LEG PACKAGES



C20 / C25 D20 / D25

QTY DESCRIPTION CODE(20) CODE(25)1 Pipe 6m IN20X6M IN25X6M1 Reducing tee INRT2520 INRT32251 Female tee INTF25 3/8 INTF25 1/21 Hose reel HR1/4X15M HR3/8X10M1 Bush 24 3/8-1/4 24 1/2-1/41 Male adapter INMA2012 INMA25201 Manifold INM1/2-1/2 INM3/4-1/22 Couplings INCSM8 INCSM82 Clips INCL20 INCL25

QTY DESCRIPTION CODE(20) CODE(25)1 Pipe 6m IN20X6M IN25X6M1 Reducing tee INRT2520 INRT32251 Male adapter INMA2012 INMA25201 Manifold INM1/2-1/2 INM3/4-1/22 Couplings INCSM8 INCSM81 Nipple 27 1/2 27 3/41 Ball valve 1/2 B/V 3/4 B/V1 M&F elbow 25 1/2 25 3/41 Minsup coupling AM012 AM0202 Clips INCL20 INCL25

DROP LEG PACKAGES



E20 / E25 F20 / F25

QTY DESCRIPTION CODE(20) CODE(25)1 Pipe 6M IN20X6M IN25X6M1 Reducing tee INRT2520 INRT32251 Lugged elbow INLE2012 INLE25201 Coupling INCSM8 INCSM82 Clips INCL20 INCL25

QTY DESCRIPTION CODE(20) CODE(25)1 Pipe 6m IN20x6M IN25X6M1 Reducing tee INRT2520 INRT32251 Double outlet INM20-1/2 INM25-1/22 Couplings INCSM8 INCSM82 Clips INCL20 INCL25

DROP LEG PACKAGES



G20 / G25 H20 / H25

QTY DESCRIPTION CODE(20) CODE(25)1 Pipe 6m IN20X6M IN25X6M1 Reducing tee INRT2520 INRT32251 Adapter INMA2012 INFA25201 Manifold INM2 INM31 Nipple N/A 73 1/2-3/41 Socket N/A 26 1/23 Couplings INCSM6 INCSM62 Clips INCL20 INCL25

QTY DESCRIPTION CODE(20) CODE(25)1 Pipe 6M IN20X6M IN25X6M1 Reducing tee INRT2520 INRT32251 Male adapter INMA2012 INMA32251 Manifold INM2 INM21 Nipple N/A 73 3/4-1/21 Socket N/A 26 1/22 Couplings INCSM6 INCSM62 Clips INCL20 INCL25

DROP LEG PACKAGES



I20 / I25 J20 / J25

QTY DESCRIPTION CODE(20) CODE(25)1 Pipe 6m IN20X6M IN25X6M1 Reducing tee INRT2520 INRT32251 In line ball valve INBV20-1/2 INBV25/-3/41 4 way manifold INM4-1/2 INM4-3/42 Couplings INCSM8 INCSM82 Clips INCL20 INCL25

QTY DESCRIPTION CODE(20) CODE(25)1 Pipe 6m IN20X6M IN25X6M1 Reducing tee INRT2520 INRT32251 Female adapter INFA2012 INFA25201 Auto drain AD299-02 AD299-021 Reducing nipple N/A 24 3/4-1/22 Clips INCL20 INCL25

DROP LEG PACKAGES



K20 / K25 L20 / L25

QTY DESCRIPTION CODE(20) CODE(25)1 Pipe 6M IN20X6M IN25X6M1 Reducing tee INRT2520 INRT32251 Male adapter INMA2012 INMA25201 Shut off valve HVHS4000-04 HSHV5000-062 Couplings INCSM8 INCSM81 Nipple 27 1/2 27 3/41 Manifold INM1/2-1/2 INM3/4-1/22 Clips INCL20 INCL25

QTY DESCRIPTION CODE(20) CODE(25)1 Air hose PUB3/8 PUB1/21 Female tee INTF25 3/8 INTF32 1/21 Hose adapter P3 3/8X1/4 P3 1/2X1/21 Hose adapter P3 3/8X3/8 P3 1/2X1/22 Hose clips MOO OO1 Y adapter 75 1/4 75 1/22 Couplings INCSM4 INCSM8

DROP LEG PACKAGES



M20 / M25 N20 / N25

QTY DESCRIPTION CODE(20) CODE(25)1 Female tee INTF20X3/8 INTF20X1/21 Recoil hose PURC1/4X10M PURC1/4X10M1 Reducing bush 24 3/8-1/4 24 1/2-1/41 Coupling INCSF4 INCSF4

QTY DESCRIPTION CODE(20) CODE(25)1 Pipe 6m IN20X6M IN25X6M1 Reducing tee INRT2520 INRT32251 Male adapter INMA2012 INMA25201 Ball valve coupling 1/2 BV 3/4 BV2 Clips INCL20 INCL25

*These pages are used to demonstrate the most popular Infinity outlets. For simplicity, Infinity has standardized the outlets into one simple part number that includes all components. The most common drop legs are 20mm and 25mm as illustrated above. If a larger main line is required then simply substitute the tee listed above, for the size of the line required.

DROP LEG PACKAGES

83

INFINITY AIRLINE ACCESSORIES

HOSE & REELS 84COUPLINGS 94



Hose Reel Advantages

HOSES & REELS

1. EFFICIENCYA clean workspace is proven to be more efficient. Infinity reels help to avoid hose entanglements, resulting in a more organised workplace.

2. SAFETYSlips, trips and accidental falls are the leading cause of work stoppage loses in the industry. Infinity hose reels reduce the risk of workplace trips and related insurance expenses.

3. LONGER LIFE TIMEThe use of Infinity reels will reduce damage to your hose, increasing the product lifetime.

4. STOP LEAKAGESThe use of Infinity hose reels can reduce the threat of expensive air leakage.

5. PRODUCTIVITYEasily locating hoses where and when you need them increases productivity. Infinity reels improve hose management, due to automatic wind-up and length control.

6. COMFORTAdjustable length and automatic wind-up features results in a more comfortable usage with Infinity hose reels.

7. COST SAVINGReduced hose replacement, as a result of damaged hoses, means more cost saving.

Why Use Infinity Hose Reels?Infinity hose reels offer an economical and quality solution that will improve your safety record, increase efficiencies and productivity, and reduce costly downtime.

The compact nature of Infinity hose reels allows for better hose management, resulting in a more organised and efficient workspace.

The increasing demand for hose reels is also being driven globally by workplace safety regulations and requirements. The design, functionality and innovative features of Infinity hose reels provide a more effective means of handling hoses in the workspace, as well as increasing safety and minimising damage.

Infinity is pleased to offer a vast range of reels, brackets, hose and tubing, suitable to a wide variety of jobs and industries.

*Reels do not include hose, unless stated otherwise.


INFINITY AIRLINE ACCESSORIESHOSES & REELS

TECHNICAL SPECSØD HOSE ID MAX PRESSURE H L12 8mm 15 bar 251 390

TECHNICAL SPECSØD HOSE ID MAX PRESSURE H L

13.5 10mm 20bar 430 600

CODE DESCRIPTION W.P 23°C B.P 23°CHR1/4X15M Infinity 1/4" Retractable Air Hose Reel 15m 215 PSI 870 PSI

CODE DESCRIPTION W.P 23°C B.P 23°CHR3/8X10M Infinity 3/8" Retractable Air Hose Reel 10m 215 PSI 870 PSI

WORKING TEMPERATURE -5°C / +60°CSINGLE PACKAGING SIZE 240mm x 215mm x 95mm (LxWxH)STEEL HOUSING Powder painted heavy duty steel caseSPRING Strong, steel spring. Automatically rewinds hose after catch is releasedMOUNTING BRACKET Wall or ceiling; fixed or pivoting supportSTOPPER Can adjust the length of hose remaining outside the reel when retractedAIR INLET Brass coupling, 360° rotationCONNECTION Hose connects with male fitting or quick couplingHOSE Included

Retractable Air Hose ReelThe Infinity retractable air hose reel offers easy and safe delivery of compressed air. The fully enclosed heavy duty case is UV resistant and fitted with a heavy duty spring and swivel elbow.

Complete with rotational mounting bracket, this compact, lightweight retractable hose reel is suitable for any workshop and compliments the Infinity range.

Infinity Retractable Hose Reel 3/8”Infinity Retractable Hose Reel 1/4”




CODE DESCRIPTIONAW1215 Infinity Air Reel 12mm x 15m

TECHNICAL SPECSHOSE ID HOSE LENGTH INLET OUTLET MAX PSI WEIGHT12mm 15m 1/2”BSPF 1/2”BSPM 240 12kg

CODE DESCRIPTIONAW1015 Infinity Air Reel 10mm x 15m

WORKING TEMPERATURE RANGE -5°C / +65°CMOUNTING Heavy duty wall mounting swivel systemFITTINGS Positive crimp hose fittingsLATCHING Positive latching systemQUALITY FEATURES Impact and corrosion resistant with anti static and flame retardants

PRODUCT FEATURES

Highest quality ‘finished edge’ spring steel trap Full flow swivels and fluid pathsUnique ratchet tensioning system Replaceable protective mouth guardFood grade approved materials Unique service locking pin port for added safetyTwo part fully adjustable bumper Easy mount drill hole pattern supplied

Spring Rewind Air ReelThe Infinity steel spring rewind air reel features a heavy duty reinforced steel construction, a ratchet or free running operation and UV stabilization. A spring protector protects the hose against damage when pulled or stretched, and the reel comes with a wall/ceiling mounted bracket.

This hose reel works with suitable pneumatic tools, and is appropriate for automatic maintenance and manufacturing facilities.

Air Reel 12mm

Air Reel 10mm

TECHNICAL SPECSHOSE ID HOSE LENGTH INLET OUTLET MAX PSI WEIGHT10mm 15m 3/8”BSPF 3/8”BSPM 240 12kg




CODE DESCRIPTIONG1218 Infinity Water Reel 12mm x 18m

TECHNICAL SPECSHOSE ID HOSE LENGTH INLET OUTLET MAX PSI WEIGHT12mm 18m 3/8” BSPF 3/8” BSPM 240 12kg

CODE DESCRIPTIONEL2402010 Electrical Reel 12mm x 20m

CODE DESCRIPTIONAREELRET-OXY Gas Welding Reel 5mm x 8m

TECHNICAL SPECSCABLE HOSE LENGTH CORES INLET OUTLET VAC WEIGHT12mm 20m 3 Plug Socket 240 12kg

TECHNICAL SPECSHOSE ID HOSE LENGTH INLET OUTLET MAX PSI WEIGHT

5mm 8m 5/8” UNFM 5/8” UNFF - 12kg

Electrical Reel

Gas Welding Reel

Workshop H20 Reel



OUTLET MAX PSI WEIGHT1/2” 500 35kg


CODEHRSR10X30

DESCRIPTION10mm x 30m 500 psi Bare Reel

CODEHRSR12X30

TECHNICAL SPECSHOSE ID HOSE LENGTH INLET12mm 30m 1/2”


MOUNTING Four position guide arm allows for wall, floor, ceiling or pit mountingLATCHING Positive latching systemQUALITY FEATURES Impact and corrosion resistant

PRODUCT FEATURES

Compact rugged design External spring canister for easy maintenanceHigh flow swivels and fluid paths Stainless steel roller guides with ball bearingsBall bearing main axle bearings Welded frame designHeavy duty roll spun flanges Stainless steel fasteners used where applicable

*Hose not included

Steel Spring Rewind Reel 10mm

*Hose not included


Steel Spring Rewind ReelThe Infinity heavy duty steel spring rewind reels incorporate contemporary compact design and manufacturing techniques to guarantee long life and trouble free performance.

To reduce maintenance and extend the working life, this reel has a unique five in one aluminium casting, comprising of the main shaft, the latch and ratchet mechanism, the spring arbour and the goose neck.

The all-steel frame and drum construction with baked-on polyester powder coat finish combine to produce a rugged corrosion resistant product, suitable for a wide variety of heavy duty applications, including high volume compressed air.


HOSES & REELS




OUTLET MAX PSI WEIGHT1” 500 35kg


CODEHRSR19X23

CODEHRSR25X15

TECHNICAL SPECSHOSE ID HOSE LENGTH INLET25mm 15m 1”


CODE DESCRIPTIONIN-BR-PIV 80000 - D80000 SR Series Pivot Bracket

CODE DESCRIPTIONIN-BR-ST Gen III Mild Steel Bracket

*Hose not included


*Hose not included


Pivot Bracket SR Series Mild Steel Bracket



HOSES & REELS



CODE DESCRIPTION W.P 23°C B.P 23°C

PURC1/4X5M 1/4" ID Recoil Hose 5m 145 PSI 450 PSI

PURC1/4X7.5M 1/4" ID Recoil Hose 7.5m 145 PSI 450 PSI

PURC1/4X10M 1/4" ID Recoil Hose 10m 145 PSI 450 PSI

1. TOUGH FROM THE INSIDE OUTPolyurethane is an extremely tough plastic, used everywhere from skate board wheels to auto bumpers. Our polyurethane retractable hoses are the ideal choice for tough and challenging air tool hose requirements.

2. EXCEPTIONAL WEAR AND KINK RESISTANTWhile you can cut a coil hose with a sharp knife, it is at least 10 times more tear resistant than other hoses. Most oils and fuels will not affect the coil, and it is almost impossible to permanently kink. The recoil hose resists everyday abuse without leaving a dent, and spring guards are not required.

3. RECOIL THAT LASTS AND LASTSPut our coil to the test – stretch it out to full length, give it a further strong pull, and then release. Watch the hose recoil right back, regaining it’s memory immediately. The coil has a memory that can be depended on.

Polyurethane Recoil HoseThe polyurethane recoil hose is the ideal choice for tough and challenging air tool hose requirements.

With exceptional wear and kink resistance, this heavy duty hose has a recoil that lasts and lasts. While it is tough, it is also light and flexible, making it easier to use.

Fittings replacement is made easy with brass fittings that let you make changes on the spot. All swivel fittings come with factory applied thread sealant, resulting in a dependable, leak tight seal which is resistant to vibration loosening.

Infinity Polyurethane Tubing

HOSES & REELS

Recoil Hose Advantages




PUB1/2X20M 1/2" (ID) Braided Air Hose 20m 200 PSI 800 PSI












Lightweight, abrasive resistant, high flow, greater flexibility, high resistant to UV, oils greases & fuels.

3 OPEN MESH POLYESTER BRAIDING integrated in flexible wall

3 GREATER PRESSURE CAPABILITY than non-reinforced polyurethane hose

3 ULTRA LIGHTWEIGHT AND EASY TO HANDLE

3 SUPERIOR ABRASION RESISTANCE

3 RESISTANCE to weathering, tearing, impacts, oils, greases & fuels.

3 GREAT FLEXIBILITY AND USER FRIENDLINESS even in subzero temperatures.

Polyurethane HoseThe Infinity polyurethane hose features open mesh polyester braid reinforcement, integrated into an extremely flexible wall. This ensures a far longer service life and greater pressure capability than un-reinforced hose products.

Unlike some other hoses, this product contains no plasticizers, which can migrate and cause flow contamination and tube hardening.

Resistant to attack from moisture and fungi, UV rays, weathering and exposure, the Infinity polyurethane braided hose is suitable for outside use, and is extremely durable in rugged, demanding environments.

3 Transfer of air and fluids under severe conditions

3 Feed and return lines

3 Abrasive slurry transfer

3 Granular transfer lines

3 Small engine fuel lines

3 Robotics control lines

3 Insulating sleeves

3 Lubrication lines

3Metering pumps

Infinity Polyurethane Hose

HOSES & REELS

Application Features & Benefits



Application Features & Benefits


PU4X100M 4mm (OD) x 2mm Tube 100m 260 PSI 780 PSI



PU10X100M 10mm (OD) x 6.5mm Tube 100m 160 PSI 490 PSI


3 EXTREMELY FLEXIBLE A small bend radius for routing into tight places

3 ULTRA KINK RESISTANT Withstands abuse that would damage other plastic tubing

3 EXCELLENT MEMORY Tolerates repeated flexing

3 VERY ABRASION RESISTANT Outlasts other tubing, suitable for conveying abrasives

3 LOW GAS PERMEABILITY Reduces leak and contamination problems

Polyurethane TubingPolyurethane tubing is usually the best choice for applications that require extensive flexing, a small bend radius or where kinking can be a problem.

Infinity polyurethane tubing uses Ether base raw material because it will not break down or be affected in any way by moisture.

Offering Ether base components means products are less expensive and generally stronger. However, applications should be limited to areas of consistent low temperatures and where high and continued flexibility is essential.

3 Transfer of air and fluids under severe conditions

3 Feed and return lines

3 Abrasive slurry transfer

3 Granular transfer lines

3 Small engine fuel lines

3 Robotics control lines

3 Insulating sleeves

3 Lubrication lines

3Metering pumps

Infinity Polyurethane Tubing

HOSES & REELS



Features & Benefits


RUB3/8X20M Infinity Industrial Rubber Hose 3/8" ID 300 PSI 900 PSI



RUB1X20M Infinity Industrial Rubber Hose 1" ID 300 PSI 900 PSI

3 ABRASION RESISTANT to workshop wear and tear

3 RESISTANT TO WELDING SPLATTER

3 COMPATIBLE FOR ABRASIVE DELIVERY FOR SANDBLASTING

Industrial Rubber HoseInfinity rubber hose is a high quality, multipurpose hose that is suitable to a variety of applications such as construction and mining. Its high resistant textile reinforcement ensures it is abrasion, heat and weather resistant, making it ideal for rough industrial situations.

Industrial Rubber Hose

HOSES & REELS



Features & Benefits

3 Six stainless steel ball-locking mechanism evenly distributes load to resist wear for longer service life 3 One hand operation, resulting in easy engage and disengage 3 Improved valve structure for stable high flow output 3 En-plating fine finishing, offering high level of corrosion resistance 3 High-strength material provides long service life 3 Excellent durability and versatility 3 Strong shock resistance 3 Flow rate (SCFM): 65 3Max operating pressure 232psi 3 Operating temperature: -23oC - 100oC

B CB

D

A

A

C

E

Aluminium CouplingsInfinity aluminium couplings are a high quality product that perfectly compliments the Infinity distribution system. Best used in conjunction with the Infinity ultra-light flexi-hose, these aluminium couplings are ideal for precision pneumatic tools. While standard brass couplings place an unnecessary load on small tools, Infinity aluminium couplings are less than half the weight and keep these products as they intended to be – light.

Smaller pneumatic tools are becoming more popular as a means to not only prevent operator injuries and fatigue, but also to increase comfort level when working in awkward positions or on repetitive tasks. By only marginally increasing the working weight of pneumatic tools, the Infinity aluminium coupling ensures an ergonomically correct result.

Even though they are made from a light weight material, the Infinity aluminium couplings are not light duty in terms of performance. Allowing easy engage and disengage, the improved valve structure of this range provides stable high flow output and a greater reliability than other couplings on the market.

A Main body with #606 aluminium anodize

B Ring with NBR70

C Spring in #304 stainless steel

D Steel ball in #440C stainless steel

E Sleeve in #6061 aluminium and finished surface treatment

COUPLINGS

Structural Diagram - Main Parts



CODE DESCRIPTIONINAM4 1/4” Male Aluminium CouplingINAM6 3/8” Male Aluminium CouplingINAM8 1/2” Male Aluminium Coupling

CODE DESCRIPTIONINAF4 1/4” Female Aluminium Coupling

CODE DESCRIPTIONINAT4 1/4” Aluminium Barb CouplingINAT6 3/8” Aluminium Barb CouplingINAT8 1/2” Aluminium Barb Coupling

TECHNICAL SPECSS L

20 52.80

TECHNICAL SPECSI.D. S L8 20 55.70

10 20 55.7013 21 55.70

TECHNICAL SPECSI.D. O.D. S L4 7 20 676 10 20 678 13 20 67

Female Aluminium Coupling

Male Aluminium Coupling

Barbed Aluminium Coupling

COUPLINGS



Features & Benefits

Structural Diagram - Main Parts

3 Six stainless steel ball-locking mechanism evenly distributes load to resist wear for longer service life 3 One hand operation, resulting in easy engage and disengage 3 Improved valve structure, providing stable high flow output 3 CNC machined parts 3 En-plating fine finishing, offering high level of corrosion resistance 3 High-strength material provides long service life 3 Excellent durability and versatility 3 Good chill stability and thermostability 3 Strong shock resistance 3 Flow rate (SCFM): 65 3Max operating pressure: 232psi 3 Operating temperature: -23oC - 100oC

B CB

D

A

A

C

E

Carbon Steel CouplingsInfinity carbon steel couplings feature a proven six stainless steel ball-locking mechanism, that evenly distributes load to resist wear. This, combined with the high strength, durable carbon steel and fine finishing, results in a longer service life and corrosion resistance.

These couplings allow easy engage and disengage, and their improved valve structure provides stable high flow output.

The Infinity carbon steel couplings are an extremely durable and reliable product, and provide a more compact solution than other couplings on the market.

A Main body with #45 carbon steel and EN plating

B Ring with NBR70

C Spring in #304 stainless steel

D Steel ball in #440C stainless steel

E Sleeve in #6061 carbon steel and finished surface treatment

COUPLINGS



CODE DESCRIPTIONINCSM4 1/4” Male Carbon Steel CouplingINCSM6 3/8” Male Carbon Steel CouplingINCSM8 1/2” Male Carbon Steel Coupling

CODE DESCRIPTIONINCSF4 1/4” Female Carbon Steel Coupling

CODE DESCRIPTIONINCST4 1/4” Carbon Steel Barb CouplingINCST6 3/8” Carbon Steel Barb CouplingINCST8 1/2” Carbon Steel Barb Coupling

TECHNICAL SPECSS L

19 52.80

TECHNICAL SPECSI.D. O.D. S L4 7 19 676 10 19 678 13 19 67

TECHNICAL SPECSI.D. S L8 19 55.70

10 19 55.7013 21 55.70

Female Carbon Steel Coupling

Male Carbon Steel Coupling

Barbed Carbon Steel Coupling

COUPLINGS



Features & Benefits

How to use the HSC safety couplings

3Maximum safety guaranteed, avoiding all risk of hose whip or accidental disconnection 3 High performance 3 Flexible and automated action mechanism 3 Limited pressure drop 3 Coupling sealing guaranteed 3 Thread sealing gasket 3Main material: aluminium alloy 3 Sealing material: NBR 3 Optimised flow rate: 75 SCFM 3Maximum working pressure: 300 psi 3 Operating temperature: -20oC - 80oC

HSC Safety CouplingsThe HSC safety couplings boast triple safety features for the internal filter, complimented with a double locking and advanced venting system.

They offer improved cost effectiveness compared to that of other couplings, due to their longer service life, long duration sealing and a swivel body for easier installation. The ergonomic and compact shape of the HSC safety couplings ensures intuitive and natural handling.

With a patent valve structure providing stable high flow output, these couplings are specially designed to guard against workplace injuries and aid in maximum efficiency of pneumatics systems and tools.

1 PLUG ENGAGEMENT:Insert the plug into the primary ring (A).Push plug until the primary ring automatically pops upwards, securing the plug in place.

3 UNLOCKING:Rotate the secondary ring until the release arrow is once again in line with the red point.Move the secondary ring back, away from the pri-mary ring.

4 PLUG DIS-ENGAGEMENTMove primary ring backward, dis-engaging plug from coupling.

A

AB

COMPRESSED AIR

RED POINT

2 LOCKING:Rotate the secondary ring (B) until the ‘release’ arrow is in line with the ‘red point’.Move the secondary ring towards the primary ring, and then rotate away from the red point.

COUPLINGS



Female Safety Coupling

Male Safety Coupling

CODE DESCRIPTIONINCSSCF4 1/4” Female Safety CouplingINCSSCF8 1/2” Female Safety Coupling

TECHNICAL SPECSS L End Type Size Body Class

28 60.8 1/4” 1/4”41.2 94.6 1/2” 1/2”

CODE DESCRIPTIONINCSSCM4 1/4” Male Safety CouplingINCSSCM8 1/2” Male Safety Coupling

TECHNICAL SPECSS L End Type Size Body Class

28 80.3 1/4” 1/4”41.2 116.6 1/2” 1/2”

CODE DESCRIPTION20PM Male Plug (NP) 1/4" 40PM Male Plug (NP) 1/2"

Infinity Male PlugThe HSC safety couplings are ideal for use in conjunction with Infinity or Nitto style high flow plugs.See page 100 for more Infinity plug options.

COUPLINGS


INFINITY AIRLINE ACCESSORIESCOUPLINGS

CODE DESCRIPTION20PH Hose Plug (NP) 1/4" 30PH Hose Plug (NP) 3/8" 40PH Hose Plug (NP) 1/2"

CODE DESCRIPTION20PM Male Plug (NP) 1/4" 40PM Male Plug (NP) 1/2"

CODE DESCRIPTION20SF Female Plug (NP) 1/4"

CODE DESCRIPTIONNP30P Hose Plug (SP) 1/4"

Infinity AdaptersInfinity adapters are a precision CNC machined steel plug complete with nickel plating. Designed for industrial use, this plug is ideal to be used with either the aluminium, carbon steel or safety couplings.

Male Plug Hose Plug

Female Plug Hose Plug (Lockable)

101

INDEX


INDEX

Symbols110mm 62, 71, 72, 73, 74, 75135˚ 64

AAbsorption 36, 38, 41Accessory Kit 30, 31Adapter 63, 79, 100Air 2, 3, 10, 12, 15, 19, 24, 25, 26, 37,

62, 71, 81, 85, 86, 91, CAir Dryer 24, 25, 26Airmac 28, 29Air Receiver 28, 29Air Reel 86Aluminium 12, 43, 47, 49, 57, 58, 62, 71,

94, 95Auto-Drain 30, 31

BBarbed 95, 97Box 6, 9, 11, 13, 16, 17, 20, 21, 22Bracket 51, 89Butterfly Valve 74

CCarbon Steel 96, 97CDX 25, 26Coalescing 36, 37, 40Collar 61, 75Connector 64, 65, 66, 68Coupling 63, 67, 71, 76, 77, 78, 79, 80,

81, 82, 94, 95, 96, 97, 98, 99CSA 10, 11CSB 12, 13CSC 5, 6, 7, 14, 16, 17CSD 5, 7, 14, 15, 16, 17CSK 8, 9

DDrain 12, 19, 24, 30, 31, 34, 35, 36, 37,

38, 39, 40, 43, 47, 56, 68, 80DRC 5, 18, 20, 22DRD 5, 18, 19, 20, 21, 22DRE 5, 6, 7, 18, 19, 20, 21, 22Drilling Rig 69Drip Leg 68Drop Leg Packages 55, 76, 77, 78, 79,

80, 81, 82

DR Series 6, 18Dryer 8, 10, 12, 14, 18, 19, 20, 21, 24,

25, 35, 37

EElbow 64, 65, 69, 71Electrical Reel 87Electronic Controller 15Element 40, 41ES4000 15

FFemale 57, 58, 63, 65, 69, 72, 73, 77,

80, 81, 82, 95, 97, 99, 100Filter 10, 12, 15, 19, 25, 34, 35, 36, 37,

38, 39, 40, 42, 43, 44, 46, 47, 48, 49, 50, 51, 98

Filter Regulator 50Filtration 34, 35, 36, 37, 38, 39, 40, 41Fixed Speed 8, 10, 12, 14, 18Flanged Tube 74Flange Kit 75Flat Gasket 73

GGasket 73Gas Welding Reel 87Gauge 32

HHose 77, 81, 83, 84, 85, 88, 89, 90, 91,

93, 100Hose Reel 84, 85HSC 98, 99

IIndustrial 34, 36, 38, 40, 41, 93Industrial Filtration 34, 35, 36, 37, 38,

39, 40, 41Infinity 5, 6, 8, 9, 10, 11, 12, 13, 14, 16,

17, 18, 20, 21, 22, 23, 24, 25, 26, 33, 34, 35, 36, 37, 38, 39, 42, 44, 46, 48, 50, 55, 56, 61, 71, 82, 83, 84, 85, 86, 87, 88, 90, 91, 92, 93, 94, 96, 99, 100

Infinity Plus 6, 11, 13, 16, 17, 20, 21Infinity Pro 6, 16, 17, 20, 21, 22Installation 12, 25, 59IVR 6, 14, 18


INDEX

LLockable 100Lubricator 48, 49, 50, 51, 76Lugged 69, 78

MMale 57, 58, 63, 64, 76, 77, 79, 81, 82,

95, 97, 99, 100Manifold 69, 70, 76, 77, 79, 81Manual Drain 30, 31, 35, 37, 39Mild Steel Bracket 89

NNitrogen 62

OOF 44, 46, 47, 48, 50, 62OFR 42, 50Oil 2, 10, 12, 15, 18, 19, 33, 34, 36, 38,

49, 52OL 48, 49, 50OR 43, 44, 45, 48, 50

PPipe 1, 35, 37, 39, 42, 44, 46, 48, 50,

52, 55, 56, 59, 60, 61, 62, 71, 76, 77, 78, 79, 80, 81, 82

Pipe Systems 55Pivot Bracket 89Plug 43, 45, 47, 67, 73, 87, 98, 99, 100Polyurethane 90, 91, 92Pre-Filter 34, 40

RRecoil 82, 90Reducer 73Reducing 66, 76, 77, 78, 79, 80, 81, 82Reel 84, 85, 86, 87, 88, 89Refrigeration 26Regulator 15, 42, 43, 44, 45, 48, 50, 51,

76Retractable 85Rig 69Rotary Screw 8, 10, 12, 14, 18Rubber Hose 93

SSaddle Clamp 68Safety 14, 57, 58, 98, 99Separators 52Sepremium 52, 53, 54Spring Rewind 86, 88, 89Steel Spring Rewind 88, 89Straight 63

TTank 6, 11, 12, 13, 44Tee 56, 65, 66, 72Tool 68Trap 37, 86Tube 58, 59, 61, 67, 74, 92Tubing 90, 92

UUnion 66

VVacuum 57, 58, 62Valve 35, 37, 39, 49, 67, 74Variable Speed 6, 8, 10, 12, 14, 16, 17,

18, 19, 20, 21, 22

WWater 19, 52, 87Workshop 87

ZZero Condensate 56, 72


HOW TO ORDER WITH NPS

Phone, fax or email orders

Nessco Pressure Systems Workshop

Contact your dedicated NPS sales representative

Come in and see us! We've got all your essentials lined up in our Nessco Pressure Systems workshop. We cater all from start to finish, including initial consultation, installation & after-sales services.

Nessco Pressure Systems has a fleet of dedicated on-road sales representatives servicing right across Perth and regional WA.

Nessco Pressure Systems sales representatives strive to deliver a personalised service to you and your business that is always on-hand. All Nessco Pressure Systems sales representatives offer a wealth of industry experience and expertise, and are always up to date with the latest special offers and discounts across the entire Nessco Pressure Systems range.

Call (08) 9333 4999 to talk to the customer service team at our Nessco Pressure Systems workshop located in Welshpool. Our team will personally take your call, answer your enquiries and process your order.

You can also fax your orders through on (08) 9333 4900.

Alternatively, you can place your order anytime via email to [email protected] and our team will process your order immediately.

We are here

274 Welshpool RoadWelshpool Rd

Treasu

re R

d

George S

t

Maniana Park

Trea

sure

Rd

Treasu

re R

d North

Poole St

Poole StK

umall R

d

Welshpool Rd

Wharf

St

Welshpool Rd

Orrong Rd

Orrong Rd

Orrong Rd

Orrong Rd

Kew

dale

Rd

KewdaleRd

Hamilt

on St

Welshpool

QueensPark

Nessco Pressure SystemsCompressed Air Equipment Specialists

274 Welshpool Road, Welshpool 6106 Perth, WA

Phone: (08) 9333 4999 Fax: (08) 9333 4900 Email: [email protected]


COMPRESSED AIR SYSTEMS2014 EDITION

COMPRESSED AIR SYSTEMS - Nessco · PDF fileCOMPRESSED AIR SYSTEMS 2014 EDITION Compressor,...

Documents

Transcript of COMPRESSED AIR SYSTEMS - Nessco · PDF fileCOMPRESSED AIR SYSTEMS 2014 EDITION Compressor,...