COMPOSITE PANELS WITH NATURAL WOOD VENEER · 2020-06-30 · 04 Colours ProdEX Each Prodema, S.A....
Transcript of COMPOSITE PANELS WITH NATURAL WOOD VENEER · 2020-06-30 · 04 Colours ProdEX Each Prodema, S.A....
C O M P O S I T E P A N E L S W I T H N A T U R A L W O O D V E N E E R
00
The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
NE
W O
N
THE WORLD
MA
RK
ET!
YOUR FAÇADES WILL
ALWAYS BE IN PERFECT CONDITION
01
Clínica PombaldialArch. Filipe Sousa(Portugal)
Some skins do
withstand the test of time
02
The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
AraganoArch. Sebastián del Río(Chile)
Lo
ots
i Ho
use
Arc
h. H
anno
Gro
sssc
hmid
tH
G A
rchi
tect
ure
(Est
onia
)
03The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
Composition of ProdEX panelsProdEX is a composite panel faced with a natural wood veneer and coated with a proprietary coating, based on synthetic resins and PVDF, which protect the panel from the effects of sunlight, chemical attack (anti-graffi ti) and the damage caused by atmospheric agents.
Prodema surface treatment
Bakelite core
Underside
Natural wood 0,8 mmpeeled
Natural wood 0,8 mmpeeled
Attractive aesthetic qualities due to the nature of the product – natural wood.
Resistance to weathering. In the artifi cial aging tests, ProdEX obtains a colour stability of ≥ 3 after 6000 hours of exposure to xenon radiation, compared with the 3000 hours required by the EN 438-2: 2005 standard, section 29.
Fire-proof material
Thickness ≥ 6 mm Clas.: B-s2, d0 (according to EN 13.501-1)
Thickness ≥ 3 mm Clas.: C-s2, d0 (according to EN 13.501-1)
NON-fi re-proof material
Thickness ≥ 8 mm Clas.: C-s1, d0 (according to EN 13.501-1)
Thickness ≥ 6 mm Clas.: D-s2, d0 (according to EN 13.501-1)
Length x Width2.440 mm x 1.220 mm
Thicknesses3, 6, 8, 10, 12, 14, 16, 18, 20, 22 mm
(For dimensional tolerances see data sheet)
ProdEX Reaction to fi re
Dimensions
04
Colours ProdEXEach Prodema, S.A. panel is faced with a natural wood veneer, are each unique and will exhibit differences in grain and colour within the same supply. Prodema carefully selects the wood veneers in an endeavour to ensure that the colour within a batch will be as homogeneous as possible.
As wood is a natural and dynamic product, the shade and grain may vary from digital and product samples.
The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
Okume Veneer
Ayous VeneerR
ustic
Dee
p br
own
Ice
grey
Dar
k br
own
Ligh
t bro
wn
Pal
e
Moc
ca
Cre
am
All ProdEX fi nishes are Smooth fi nish (smooth).
05
Rathaus (Cityhall)Bad DoberanArch.Hass+Bries(Germany)
The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
06
Because beautyis also on the inside
Interior coverings for humid environments.
Neptuno
ProlignaInterior wood wall panels
for dry environments.
NEW TEXTURES AND COLOURS
NEW RANG
E
The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
07
Supra
Laminium
Auditorium
Engineered wood fl ooring designed for high-traffi c commercial spaces.
Acoustical wooden panels, for wallsand ceilings.
Natural wood laminates.
The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
08
Neptuno
The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
H u m i d i t y i s n o t a p r o b l e m
Humidity is not a problem, with its Bakelite core panels that have been specially designed for humid environments.
09The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
Composition of Neptuno panels panels are made up of a cellulose fi bre core that has been impregnated with thermosetting phenolic resin, and its natural wooden surface is specially treated to comply with the strictest requirements of humid environments.
Length x Width
2.440 mm x 1.220 mm
Thicknesses
3, 6, 8, 10, 12, 14, 16, 18, 20, 22 mm
(For dimensional tolerances see data sheet)
Dimensions Prodema surface treatment
Natural wood (0.8 mm) rotary cut or fl at cut
Bakelite core
Natural wood (0.8 mm) rotary cut or fl at cut
Flipside
Neptuno Fire reaction
Fire-proof material
Thickness ≥ 6 mm Class.: B-s2, d0 (according to EN 13.501-1)
NON fi reproof material
Thickness ≥ 6 m Class.: C-s2, d0 (according to EN 13.501-1)
10
Flat cut woodM
aple
*
Sap
elli*
Teak
*
Lim
us*
Nat
ural
bee
ch*
Zeb
rano
*
Bub
inga
*
Wen
ge*
Whi
te q
uerc
us*
Whi
te o
ak*
Che
rry*
Euc
alyp
tus*
Afr
ican
ced
ar*
Am
eric
an w
alnu
t*
2620
6*
Changes in tone and grain between
strips is particularly marked in the
cases Eucalyptus and Teak so it is
advisable to consult with the factory.
Prodema panel veneers are made with natural wood so the tone and graining of the samples
are a mere guide. The surface composition of the Prodema panels may also vary depending on
the application, so there may be differences in tone for the same colour in the different families
of panels.
Colours(Neptuno)
Que
rcus
*
The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
Bam
boo*
Sta
ined
zeb
rano
*
11The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
Rotary cut wood
Okume Veneer
Ayous Veneer
Rus
tic**
Dee
p br
own*
*
Ice
grey
**
Dar
k br
own*
*
Ligh
t bro
wn*
*
Pal
e**
Bla
ck w
ood*
*
Moc
ca**
Cre
am**
Would you like a sample of some of our products?
Simply send an email to:[email protected] we will get it to you.
www.prodema.com
* Neptuno Texture fi nish (raised).** Neptuno Smooth fi nish (smooth).
Large Diamond Engraving:Available in Light brown, Rustic, Pale, Mocca, Cream, Deep brown, Dark brown, Black wood and Ice grey ≥ 10 mm
Nat
ural
A*
12
Proligna
The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
P o d u c t s w i t h a c o r e
The most extensive range of colours and
interior cladding fi nishes for dry environments.
13The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
Composition of Proligna panelsProligna panels have a plywood core that has been impregnated with thermosetting phenolic resins, and the natural wood surface is protected by a proprietary abuse-resistent fi lm or coat.
Dimensions
Proligna Fire reaction
Prodema surface treatment
Natural wood (0.8 mm) rotary cut or fl at cut
Core: Phenolic plywood
Anti-warping layer
Impact absorption layer
Fireproof material
Thickness ≥ 14 mm Clas.: B-s2, d0 (according to EN 13.501-1)
NON fi reproof material
Thickness ≥ 8 mm Clas.: D-s3, d0 (according to EN 13.501-1)
Length x Width
2.440 mm x 1.220 mm
Thicknesses
8; 11; 14; 17; 20; 23 mm
(For dimensional tolerances see data sheet)
14
Auditorium
The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
L i s t e n t o t h e s i l e n c e
The solution that combines the beauty
of natural wood with an excellent level of
acoustic absorption, thanks to its perforated
composition.
15The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
Composition of Auditorium panelsAuditorium panels are composed of a wood and resin isotropic mass, and a natural wood face protected by an abuse-resistent proprietary coat. Different types of perforations are offered depending on the level of sound absorption required.
Dimensions
Auditorium Fire reaction
Prodema surface treatment
Natural wood (0.8 mm) rotary cut or fl at cut
MDF Panel
Impact absorption layer
Anti-warping layer
Fireproof material
Thickness ≥ 12 mm Class.: C-s2, d0 (according to EN 13.501-1)
Length
600, 1.200, 2.440 mm
Width
600, 1.200, 1.220 mm
Thicknesses
12, 18 mm
Other dimensions: please check
(For dimensional tolerances see data sheet)
16
Supra
The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
T h e S u p r a s o l u t i o n f o r c o m m e r i c a l a r e a s
The super wooden fl ooring solution that is
specially designed for commercial surfaces or
those subjected to high-traffi c.
17The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
Composition of Supra panelsSupra panels are composed of a plywood core impregnated with thermosetting phenolic resins, and a natural wood face protected by a proprietary coat, rendering Supra previously unimaginable performance characteristics.
Supra Fire reaction
Length
1.200, 2.450 mm
Width
188, 290, 390, 590 mm
Thicknesses
11 mm (standard), 14 mm (to order)
Other dimensions: please check
(For dimensional tolerances see data sheet)
Prodema surface treatment
Anti-warping layer
Natural wood(0.8 mm) cutting the rolled or fl at
Core: Phenolic board
Fireproof material
Thickness ≥ 11 mm Class.: Bfl -s1 (according to EN 13.501-1)
18
Laminium
The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
T h e b e s t s o l u t i o n
This range offers high-performance laminates
in natural wood that are extremely fl exible and
have been specially designed to cover raised
technical fl oors, doors, columns, tabletops, etc.
19The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
Composition of Laminium panelsThe Laminium range offers high pressure laminates covered in natural wood that are extremely fl exible and which have been specially designed to cover raised technical fl oors, doors, columns, tabletops, etc.
Dimensions
Laminium Fire reaction
Length x Width
2.440 mm x 1.220 mm
Thicknesses
1 mm
(For dimensional tolerances see data sheet)
Prodema surface treatment
Natural wood
Impact absorption layer
NON fi reproof material
Thickness ≥ 1 mm Class.: D-s2, d0 (according to EN 13.501-1)
20
The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
Flat cut woodM
aple
Sap
elli
Teak
Lim
us
Nat
ural
bee
ch
Zeb
rano
Bub
inga
Wen
ge
Whi
te q
uerc
us
Whi
te o
ak
Che
rry
Euc
alyp
tus
Afr
ican
ced
ar
Am
eric
an w
alnu
t
2620
6
Changes in tone and grain between
strips is particularly marked in the cases
Eucalyptus and Teak so it is advisable to
consult with the factory.
Prodema panel veneers are made with natural wood so the tone and graining of the samples
are a mere guide. The surface composition of the Prodema panels may also vary depending on
the application, so there may be differences in tone for the same colour in the different families
of panels.
Colours(Proligna, Auditorium, Supra, Laminium)
Que
rcus
Bam
boo
Sta
ined
zeb
rano
21The description of the products’ features and the technical instructions for their use contained in this document do not imply any contractual obligations whatsoever on the
manufacturer’s part. They correspond to current knowledge and may be modifi ed without prior warning. This document contains general information that may be updated
through that given in the manufacturer’s website.
Rotary cut wood
Okume Veneer
Ayous Veneer
Alm
ond
Dee
p br
own
Dar
k br
own
Ligh
t bro
wn
Hon
eyB
lack
woo
d
Moc
ca
Nat
ural
A
Would you like a sample of some of our products?
Simply send an email to:[email protected] we will get it to you.
www.prodema.com
All Proligna and Auditorium fi nishes are Texture (raised).All Supra and Laminium fi nishes are Super Matt (smooth matte).
Prodema means beauty, warmth and experience in wooden fl oors and coverings.
We have been working in this fi eld for over 100 years, and this experience has
enabled us to become what we are today: a reputable brand respected by architects
around the world, who have found in our products the breath of fresh air they had
been looking for to meet their creative needs.
With over 75 regional offi ces all over the world, Prodema is now a global trademark
and can be seen in many of the large-scale architectural projects in a wide range
of countries.
Prodema around the world
Bº San Miguel, s/n • 20250 Legorreta • Gipuzkoa (SPAIN) • T.: (+34) 943 80 70 00 • F.: (+34) 943 80 71 30E.: [email protected] • [email protected]
W e j u s t
trees
At Prodema we have always been committed to the environment in general and specifi cally with forest sustainability.
Our compromise may seem selfi sh, and in fact it is. But above all it is sincere; because having worked with wood for over 100 years has led us to respect it and to be conscious of the importance to establish policies to
protect it.
That is why we accepted the CITES convention so many years ago. We also obtained the ISO 14001 certifi cate.
Now, we have taken a large step by obtaining the PEFC Certifi cate which guarantees that the wood and other products of wood origin used to manufacture ProdEX panels are from forests that are managed in an
environmentally sustainable fashion.
www.prodema.com
Bº San Miguel, s/n
20250 Legorreta • Gipuzkoa (SPAIN)
T.: (+34) 943 80 70 00 • F.: (+34) 943 80 71 30
The
des
crip
tion
of t
he p
rodu
cts’
fea
ture
s an
d th
e te
chni
cal
inst
ruct
ions
for
the
ir us
e co
ntai
ned
in t
his
docu
men
t do
not
im
ply
any
cont
ract
ual
oblig
atio
ns w
hats
oeve
r on
the
man
ufac
ture
r's p
art.
The
y co
rres
pond
to c
urre
nt k
now
ledg
e an
d m
ay b
e m
odifi
ed w
ithou
t prio
r w
arni
ng. T
his
docu
men
t con
tain
s ge
nera
l inf
orm
atio
n th
at m
ay b
e up
date
d th
roug
h th
at g
iven
in th
e m
anuf
actu
rer's
web
site
.
3.00
0 -
IN -
06
- 20
10
prodema head offi ce and plant