Components 2010

2010Components

TotalcompThe weigh you want... today

IFC13-01 Pollitt Dr Ext

Fair Lawn NJ 07410201-797-2718 * 800-631-0347

www.totalcomp.comFax 201-797-2287Toll Free Fax 888-797-2288

Prices are subject to change without notice. Please call for current prices. Other items are available from the manufacturers, please call for prices.

Components

Dear Customer:

This catalog has been prepared especially for the professional inthe weighing industry. I am sure that you will find it informative and helpful.

We pride ourselves on answering the phone on the first ring andshipping your order the same day that you place it.

You will also benefit from our huge inventory. Our records indicatethat we ship 49 out of 50 orders from stock.

Price is also important and you can depend on our price being thebest in the industry. If you have large quantities we can give you betterprices.

You will note that there are many new items in this catalog. Pleasetake the time to see what has been added to see if it fits what you need.

Thank you for being our customer. We look forward to manysuccessful years with you.

Best Personal RegardsRudolph J. KolaciPresident

113-01 Pollitt Dr ExtFair Lawn NJ 07410201-797-2718 * 800-631-0347

Indicators

www.totalcomp.comFax 201-797-2287

Toll Free Fax 888-797-2288

Other items are available from the manufacturers, please call for prices.Prices are subject to change without notice. Please call for current prices.

Components

SPECIFICATIONS

Totalcomp

LOAD CELL . . . . . . . .10 VDC, 120 ma(4)350 or (8)700 ohm load cells

ANALOG INPUT . . . . .0.4 µV per div, 1.0 µV per div NTEPCONVERSION . . . . . .25 updates per sec

5,000 display div NTEP50,000 div, industrial

OUTPUT . . . . . . . . . . .Full duplex RS232Baud 1200, 2400, 4800, 9600, O, E, N

ACCURACY . . . . . . . .0.01% of full scaleDISPLAY . . . . . . . . . . .Liquid Crystal display or Green LED

6 digit 0.6” highDecimal point selectableDisplay div 1,2,5,10,20,50,100,200

POWER . . . . . . . . . . .120 VAC wall adapter 50/60 Hz, 0.5 wattoutput is 12VDC, 500 ma

KEYS . . . . . . . . . . . . .lb/kg, ZERO, NET/GROSS, TARE, PRINT,

ANNUNCIATORS . . . .Gross, Net, Tare, Zero, lb, kg, pcsSIZE . . . . . . . . . . . . . .T500,T500E: 6.81”W x 2.26”D x 3.19”H, 4 lb

ABS plastic enclosure,desk top or wall mount

T500ESS: 5.5”W x 2.9”D x 9.0”H, 7 lbNEMA 4 stainless steel enclosureDesk top or wall mount

T500BW: 8.1”W x 11.8”D x 3.9”H, 10 lbABS plastic enclosure,desk top or wall mount

T500

T500E

T500ESS

T500 Weight IndicatorWeighing indicator with an extremely small package size. Front panel keys for lb/kg,ZERO, NET/.GROSS, TARE, PRINT. Full duplex RS232 serial port. T500 & T500E haveABS plastic enclosure, T500ESS has SS enclosure. All have stainless steel swivel stand.120 VAC adapter is included. T500 & T500E include 15 ft load cell cable with connector.NTEP 96-028 III 5,000 divPart Number Weight Stock Price CT500E Indicator w/Green LED display 4 lb 2841 $ 235.00T500 Indicator w/LCD w/backlite display 4 lb 2840 215.00T500ESS Indicator w/Stainless Steel enclosure 7 lb 2842 365.00

Service Parts DAC adapter 120 VAC to 12 VDC 0.5A for T500, T500E 1 lb 2843M 27.75AC adapter 100-240VAC to 12VDC 0.9A for T500ESS,TI-600ESS 1 lb 2562M 35.75AC adapter 120 VAC to 12 VDC 0.8A for TI500BWL 1 lb 2812M 35.75

Load cell connector for T500 & T500E 1 lb 2952M 29.00Load cell cable w/connector for T500 & T500E 1 lb 2687M 35.70Rear panel load cell connector, flange mount 1 lb 2953M 29.00

Main board for T500E 1 lb 2405 216.00Front overlay for T500 1 lb 2339 20.00Front overlay for T500E 1 lb 2340 20.00Front overlay for T500ESS 1 lb 2341 20.00

213-01 Pollitt Dr Ext

Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Indicators

T500P

T500EP

SPECIFICATIONS


ANALOG INPUT . . . . .0.4 µV per div, 1.0 µV per div NTEPCONVERSION . . . . . .25 updates per sec

5,000 display div NTEP50,000 div, industrial


ACCURACY . . . . . . . .0.01% of full scaleDISPLAY . . . . . . . . . . .Liquid Crystal display or Green LED

6 digit 0.6” highDecimal point selectableDisplay div 1,2,5,10,20,50,100,200


KEYS . . . . . . . . . . . . .lb/kg, ZERO, NET/GROSS, TARE, PRINT,

ANNUNCIATORS . . . .Gross, Net, Tare, Zero, lb, kg, pcsSIZE . . . . . . . . . . . . . .T500P,T500EP:

6.81”W x 2.26”D x 3.19”H, 4 lbAluminum enclosure,desk top or wall mount

T500P Weight IndicatorWeighing indicator with an extremely small package size. Front panel keys for lb/kg,ZERO, NET/.GROSS, TARE, PRINT. Full duplex RS232 serial port. T500P & T500EPhave aluminum enclosure. Three point calibration is standard on T500P and T500EP.Peak hold is a selectable feature of the T500EP. Remote display is a selectable featureof the T500EP. All have stainless steel swivel stand. 120 VAC adapter is included.T500P & T500EP include 15 ft load cell cable with connector.Part Number Weight Stock Price CT500EP Indicator w/Green LED display, peak hold 4 lb 6437M $ 275.00T500P Indicator w/LCD w/backlite display 4 lb 6438 275.00

Service Parts DAC adapter 120 VAC to 12 VDC 0.5A for T500P, T500EP 1 lb 2843M 27.75Load cell connector for T500P & T500EP 1 lb 2952M 29.00Load cell cable w/connector for T500P & T500EP 1 lb 2687M 35.70Rear panel load cell connector, flange mount 1 lb 2953M 29.00


Indicators




Components

AD-4321

LOAD CELL . . . . . . . .12 VDC +/- 5%, 280 ma AD4321A10 VDC +/- 5%, 230 ma AD4321B(8)350 ohm load cellsRemote sensing for long cable runs

ANALOG INPUT . . . . .1.1 µV to 120 µV per div AD4321A0.9 µV to 100 µV per div AD4321B

CONVERSION . . . . . .Update rate 4 times/sec10,000 display divisions130,000 internal divisions

ACCURACY . . . . . . . .0.01% of full scale

OUTPUT . . . . . . . . . . .RS232 & 20ma serial loop or BCD *Baud 600, 2400, evenWill not work w/AD-8121 printer.* Optional

KEYS. . . . . . . . . . . . . .ZERO, GROSS/NET, TARE, PRINT,STANDBY/OPERATE

ANNUNCIATORS . . . .Zero, Motion, Gross, Net

DISPLAY . . . . . . . . . . .Bright easy to see cobalt blue 0.5” high500,000 max displayDecimal point selectableDisplay div 1,2,5,10,20,50

POWER . . . . . . . . . . .120 VAC +/-10%, 50/60Hz, 12 watts

SIZE . . . . . . . . . . . . . .7.5”W x 6.3”D x 3.0”H, 3.2 lbDesk top or panel mount plastic enclosure

SPECIFICATIONS

AD-4321 Weighing IndicatorService parts only.Part Number Weight Stock Price C

Service Parts C01 Parallel BCD output TTL level 1 lb 1016 $ 199.0005 Stainless steel water resistant enclosure 1 lb 1018 399.00

PZ:710A A/D converter board 1 lb 698 369.0008:A47486 capacity tag 1 lb 64 6.00

JM:NJC-207-PF load cell connector 1 lb 642M 38.00JM:NJC-207-RM connector w/flange for rear panel 1 lb 474M 19.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Indicators



Components

LOAD CELL . . . . . . . .12 VDC +/- 5%, 280 ma(8)350 ohm load cellsRemote sensing for long cable runs

ANALOG INPUT . . . . .0.6 µV to 200 µV per divCONVERSION . . . . . .Update rate 16 times/sec

20,000 display divisions330,000 internal divisions

ACCURACY . . . . . . . .0.01% of full scaleOUTPUT . . . . . . . . . . .20ma serial loop

RS232 & 20ma serial loop or BCD *Baud 600, 1200, 2400, 4800, 9600, even4-20ma analog *Setpoint interface ** Optional

KEYS. . . . . . . . . . . . . ZERO, NET/GROSS, TARE, CODE, M+, M-,STORE, RECALL, TOTAL, PRINT, FEED,STANDBY/OPERATE

ANNUNCIATORS . . . .Center of Zero, Motion Detection, Net/Gross,Tare Entered, kg, lb, Under, Accept, Over


POWER . . . . . . . . . . .120 VAC +/-10%, 50/60Hz, 200 wattsSIZE . . . . . . . . . . . . . .200W x 142D x 186H mm, 10 lb

Desk top or panel mountPlastic enclosure

SPECIFICATIONS

AD-4322A MKII Weighing Indicator10 key pad for easy tare entry. 100 I.D. code (8 digit) memory information blocks thatcontain Tare, Comparator limits, running code total weight and number of weighing eventsfor each separate coded item. 50 tare weights can be stored in memory by I.D. number.Full Digital Calibration (FDC) for easy setting of zero and span. Digital linearizationfunction to compensate for non- linearity of load cells. Will switch from lb to kg at thepress of a button. Standard 20 ma serial output. Digital filter with four settings foreverything from high speed automated weighing to animal weighing. Waterproof keyboardmakes this indicator very useful in a variety of environments. Optional built in printer.Panel mount, desk top or wall mount. Twin displays. One display for weight, other forparameter setting, optional time and date. Peak hold circuit, built in comparator, completeRFI protection. NTEP approved Truck Scale program for general applications and Weigh-In, Weigh-Out usage.S.WA 4315NTEP 89-037 III/IIIL 10,000 div.Part Number Weight Stock Price CAD-4322A MKII Indicator, basic 10 lb 1574 $ 1,365.00AD-4322A MKII-08 Indicator w/printer 11 lb 1680 1,770.00

Options CAD-4322-01 Parallel BCD output open collector 1 lb 1575 329.00AD-4322-01A Parallel BCD output TTL levels 1 lb 1929 399.00AD-4322-02 Setpoint interface 1 lb 1771 149.00

AD-4322-04 Serial output (RS232/current output) 1 lb 1576 239.00AD-4322-07 Analog output 4-20ma 1 lb 1577 249.00AD-4322-08 Built in printer 1 lb 1578 405.00

AD-4322-09 Digital clock(time & date)for use w/printer 1 lb 1579 142.00AD-4322-10 Panel mount kit 1 lb 1109 129.00AD-4322-11 Wall mount kit 1 lb 1110 59.00

Service Parts CJM:NJC-207-PF load cell connector 1 lb 642M 38.00JM:NJC-207-RM connector w/flange for rear panel 1 lb 474M 19.00

WP:PP129-28A Thermal paper for printer, pack of (5) 1 lb 1750 34.7501:A39844 Keysheet overlay 1 lb 65 70.00PZ:2084 Switchboard (behind overlay) 1 lb 66 149.00

PZ:2082 Main board for AD4322A MKII 1 lb 1552 922.00Instruction manual 1 lb 664 22.00Maintenance manual 1 lb 665 50.00

AD-4322A MKIIw/ optional printer


Indicators




Components


ANALOG INPUT . . . . .0.6 µV to 36 µV per div

CONVERSION . . . . . .17 times/sec display update70/sec sample rate for internal setpointcomparisonIntegrating dual slope10,000 display divisions


OUTPUT . . . . . . . . . . .RS232 & 20ma serial loop or BCD *Baud 600, 1200, 2400, 4800, 9600, even4-20ma analog ** Optional

KEYS. . . . . . . . . . . . . .ZERO, TARE, GROSS/NET, PRINT,STANDBY/OPERATE

ANNUNCIATORS . . . .Zero, MD, Net/Gross, Tare entered, lb, kg

DISPLAY . . . . . . . . . . .Bright, easy to see cobalt blue 0.5” high500,000 max displayDecimal point selectableDisplay div 1,2,5,10,20,50


SIZE . . . . . . . . . . . . . .7.6”W x 7.4”D x 3.8”H, 7 lbDesk top or panel mount plastic enclosure

AD-4323 Digital Weighing IndicatorIncludes all the latest improvements to be a successor to the reliable AD4316. Standardfunctions are 17 updates/second, full RFI protection, digital filtering, DIN panel cutout, fulldigital calibration, no pots, set point interface, serial current loop output.S.WA 4298NTEP 88-095 III/IIIL 10,000 div.Part Number Weight Stock Price CAD-4323 Basic 10 lb 1437 $ 1,255.00AD-4323-01 Basic w/parallel BCD output 10 lb 1438 1,564.00AD-4323-04 Basic w/serial output 10 lb 1439 1,484.00

AD-4323-05 Set Point unit can be linked in 10 lb 1440 679.00daisy chain 7.6”W x 7.5”D x 2.2”H

Note: Need external 24 VDC power supply formore than one set point unit. 200 ma will handleten set point units.

AD-4323-07 Basic w/4-20 ma analog output 10 lb 1441 1,510.00

Field installable options CAD-4324-01 Parallel BCD output-open collector 1 lb 1444 309.00AD-4323-01A Parallel BCD output-TTL level 1 lb 1846 382.00AD-4324-04 Serial output RS232C/20ma loop 1 lb 1445 229.00AD-4323-07 Analog output 4-20 ma 1 lb 1446M 255.00

Service Parts CJM:NJC-207-PF load cell connector 1 lb 642M 38.0001:A34806 keysheet overlay 1 lb 678 29.00PZ:2074 display board 1 lb 325 315.00

PZ:2074/2075 display & main board 1 lb 326 807.00PZ:2076 Switchboard (behind overlay) 1 lb 534 58.00PZ:2077 A/D converter board 1 lb 688 408.00

Instruction & operation manual 1 lb 1443 22.00Maintenance manual with parts list 1 lb 1442 50.00and schematics

SPECIFICATIONS

AD-4323

AD-4323-05


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Indicators



Components

AD-4325A

AD-4325V



CONVERSION . . . . . .17 times/sec display update70/sec sample rate for internal setpointcomparisonDual slope integration10,000 display divisions96,000 internal divisions


OUTPUT . . . . . . . . . . .20ma serial loopRS232 & 20ma serial loop or BCD *Baud 600, 1200, 2400, 4800, 9600, O, E, N100 ingredientsSetpoint relays ** Optional

KEYS. . . . . . . . . . . . . OPERATE/STANDBY, ZERO, TARE,TARECLEAR,NET/GROSS, *

ANNUNCIATORS . . . . .Zero, MD, Gross, Net, Tare entered, Hold, kg, t



SIZE . . . . . . . . . . . . . .10.63”W x 8.4”D x 4.72”H, 13 lbPlastic enclosure, panel mount only

AD-4325A Batch Weighing IndicatorUp to 100 coded groups of setpoint values can be stored in memory. This indicatoreliminates the need for external setpoint units. All setpoint functions and memory are builtin.

A new “*” key easily recalls the next setpoint group for multi-ingredient batching. Three-Gate control of full, medium and dribble flow gates is easy with the built-in automaticmode or the customer programmed control modes. The customer programmed modeallows for full interaction with software or programmed logic control boards.

With a new approach to features such as flexible front-panel command, BCD code input,control I/O, or complete RS232C serial interface system- integration, the AD-4325A givesyou complete batching control with memory and the automatic data collection/output.

Stores up to 100 coded groups of setpoint values with running totals for each group.Automatic Free Fall Compensation constantly updates the free fall value for greater fillingaccuracy. Unrivaled conversion speed of 70 times/sec. Standard current loop for output toan external printer. Protected from electromagnetic (EMI) and radio frequency (RFI)interference. Full Digital Calibration of Zero and Span.Canadian AM 4802NTEP 92-177 III/IIIL 10,000 div.Part Number Weight Stock Price CAD-4325A Batch Weighing Indicator 13 lb 1699 $ 1,625.00AD-4325V Vertical Batch Weighing Indicator 13 lb 1390 1,625.00

Options CAD-4324-01 Parallel BCD output open collector 1 lb 1700 309.00AD-4325-02 Relay output 2 lb 1037 488.00

AD-4325-03 RS422 serial output 1 lb 2231 235.00AD-4324-04 RS232C serial output 1 lb 1701 229.00AD-4323-07 Analog output 4-20 ma 1 lb 1446M 255.00

Service Parts CInstruction and operation manual 1 lb 1703 22.00Maintenance manual with parts list and schematics 1 lb 1704 50.00

SPECIFICATIONS


Indicators




Components

AD-4326A

AD-4326B

LOAD CELL . . . . . . . .5 VDC +/- 5%, 90 ma(6)350 or (12)700 ohm load cellsRemote sensing for long cable runs




OUTPUT . . . . . . . . . . .RS232 & 20ma serial loop or set points *Baud 600, 1200, 2400, 4800, 9600, even* Optional

KEYS. . . . . . . . . . . . . ON/OFF, MODE, ZERO,TARE, NET/GROSS,SAMPLE, PRINT

ANNUNCIATORS . . . .MD, Zero, Gross, Net, Over, Target, Under

DISPLAY . . . . . . . . . . .Large easy to see LCD 0.87” high199,980 max displayDecimal point selectableDisplay div 1,2,5,10,20,50

POWER . . . . . . . . . . .(6) “C” size batteries or 120 VAC adapter,160 hours w/alkaline cells, 25 hours wNiCadbattery pack driving a load cell.

SIZE . . . . . . . . . . . . . .9.45”W x 6.14”D x 3.27”H, 10 lbDesk top plastic enclosure

SPECIFICATIONS

AD-4326 Weighing IndicatorThis high performance indicator is easy to use and is affordable. It has all the basicfeatures of the AD4321 with the addition of battery operation and large easy to read 0.87”high LCD display. Includes 120VAC adapter.S.WA number AM5079NTEP 94-045 III/IIIL 10,000 div.Part Number Weight Stock Price CAD-4326A Basic 115 VAC 10 lb 2716 $ 530.00

Options CAD-4326-04 RS232 & comparator relays 1 lb 2719 249.00

Service Parts CJM:NJC-207-PF load cell connector 1 lb 642M 38.00JM:NJC-207-RM connector w/flange for rear panel 1 lb 474M 19.00TB:163 Adapter 120VAC/7.5VDC,500ma 1 lb 2730MB 52.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Indicators



Components

AD-4327B

AD-4327A





OUTPUT . . . . . . . . . . .RS232 & 20ma serial loop or set points *Baud 600, 1200, 2400, 4800, 9600, even* Optional

KEYS. . . . . . . . . . . . . ON/OFF, MODE, ZERO, TARE, NET/GROSS,SAMPLE, PRINT

ANNUNCIATORS . . . .MD, Zero, Gross, Net, Under, Target, Over

DISPLAY . . . . . . . . . . .Large easy to see LCD 0.87” high199,980 max displayDecimal point selectableDisplay div 1,2,5,10,20,50

POWER . . . . . . . . . . .(6) “C” size batteries or 120 VAC adapter,160 hours w/alkaline cells driving a load cell.

SIZE . . . . . . . . . . . . . .11.00”W x 6.30”D x 5.12”H, 10 lbDesk top or wall mountNEMA 4 stainless steel enclosure

AD-4327 Weighing IndicatorService parts only.Part Number Weight Stock Price COptions CAD-4327-03 RS232 Serial input/output 1 lb 2738 $ 183.00

Service Parts CJM:NJC-207-PF load cell connector 1 lb 642M 38.00JM:NJC-207-RM connector w/flange for rear panel 1 lb 474M 19.00TB:163 Adapter 120VAC/7.5VDC,500ma 1 lb 2730MB 52.00

08:C42675B Keysheet overlay AD-4327A 1 lb 2726 23.0008:C42677A Keysheet overlay AD-4327B 1 lb 2727 23.0008:B31449B Display overlay AD-4327B 1 lb 2793 36.00Instruction & operation manual 1 lb 2752 22.00

SPECIFICATIONS


Indicators




Components

AD-4328

AD-4328 Digital Weighing IndicatorA low cost, general purpose Weighing Indicator. Full digital calibration. Mount on panel ordesktop. Comparator function and optional relay/transistor output. HI/GO/LO comparatorand simple weighing-in comparator can be selected. Bright red LED display. Front panel issplashproof, equivalent to IP65. Includes 120VAC adapter.Canadian AM-5252NTEP 99-074 III/IIIL 10,000 div.Part Number Weight Stock Price CAD-4328 Weight Indicator 8 lb 207 $ 475.00

Options C4328-01 BCD output open collector 1 lb 222 266.004328-02 Comparator outputs open collector 1 lb 228 88.004328-03 RS-422/485 Serial interface w/comp output 1 lb 229 261.00

4328-04 RS232,20ma & Comparator relay output 1 lb 248 163.004328-10 Indicator stand 1 lb 262 80.10

Service Parts CTB:163 Adapter 120VAC/7.5VDC,500ma 1 lb 2730M 52.00



CONVERSION . . . . . .10 times/sec display updateDual slope integration20,000 display divisions40,000 internal divisions


OUTPUT . . . . . . . . . . .20ma serial loopParallel BCD open collector transistor *Comparator output, open collector transistor *RS422/485 serial w/comparator output*RS232/20ma/Comp relay 100ma,50VDC*Baud 600, 1200, 2400, 4800, 9600, even* Optional

KEYS. . . . . . . . . . . . . OPERATE/STANDBY, PRESET TARE, M+,MODE, NET/GROSS, ZERO, TARE, PRINT

ANNUNCIATORS . . . .Zero, MD, Gross, Net, PT, lb, kg

DISPLAY . . . . . . . . . . .Bright red LED 14.2mm high6 digits 7 segmentDecimal point selectableDisplay div 1,2,5,10,20,50

POWER . . . . . . . . . . .Nominal 9VDC(6VDC to 12VDC)AC adapter 120 VAC 50/60Hz, 4 watts

SIZE . . . . . . . . . . . . . .6.6”W x 5”D x 5.5”H, 8 lbDesk top or panel mountPlastic enclosure

SPECIFICATIONS


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Indicators



Components


ANALOG INPUT . . . . .0.2 uµV per div



OUTPUT . . . . . . . . . . .RS23220ma serial loopBaud 600, 1200, 2400, 4800, 9600, evenBCD *Relay outputs ** Optional

KEYS. . . . . . . . . . . . . OPERATE/STANDBY, PRESET TARE,M+,MODE, NET/GROSS, ZERO, TARE, PRINT

ANNUNCIATORS . . . .M+, MD, Gross, Net, PT, Zero, kg, lb

DISPLAY . . . . . . . . . . .Bright easy to see cobalt blue 0.5” high7 digit max displayDecimal point selectableDisplay div 1,2,5,10,20,50


SIZE . . . . . . . . . . . . . .192W x 165D x 96H mm, 8 lb7.56” x 6.5”D x 3.78”HDesk top or panel mountPlastic enclosure

SPECIFICATIONS

AD-4329 Weighing IndicatorTriple ranges on weighing capacities. Standard RS232 and 20 ma current loop serialoutput. 4-point digital linearization across the full span. Standard accessories included:2m cable for 120 VAC, load cell connector, capacity sticker, external input plug, (4) rubberfeet, current loop output plug.NTEP 03-046 III/IIIL 10,000 divPart Number Weight Stock Price CAD-4329 Indicator 8 lb 613 $ 625.00

Options CAD-4329-01 BCD output replaces standard RS232 1 lb 614 253.00AD-4329-02 Relay outputs (3) 250 VAC or 30 VDC 1 lb 615 133.00

Service Parts CJM:NJC-207-PF load cell connector 1 lb 642M 38.00

AD-4329


Indicators




Components

SPECIFICATIONS

AD-4401 Batch Weighing IndicatorFuzzy Logic and Automatic Free Fall Compensation. Enter setpoints through front keys orexternal thumbwheels. Hold and Peak Hold functions. Weigh-In and Loss-in-Weightbatching. Check Weighing.

Assign up to 6 input functions from a selection of 14,

Programmable “F” function key on the front key pad of the AD-4401 may be programmedfor special operation,Part Number Weight Stock Price CAD-4401 Batch Weighing Indicator 4 lb 4083 $ 1,150.00

Options CAD-4401-01 Parallel BCD output open collector 1 lb 4084 269.00AD-4401-03 RS422/485 serial output 1 lb 4085 239.00AD-4401-04 RS232C serial output 1 lb 4086 219.00

AD-4401-05 Setpoint Unit 1 lb 4087 669.00AD-4401-07 Analog output 4-20 ma 1 lb 4088 349.00AD-4401-23 Front bezel to match AD-4323 1 lb 4089 47.00

LOAD CELL . . . . . . . .10 VDC +/- 5%, 230 ma(8)350 or (16) 700 ohm load cellsRemote sensing for long cable runs

ANALOG INPUT . . . . .0.3 µV per div min

CONVERSION . . . . . .17 times/sec display update100/sec sample rate for internal setpointcomparisonSigma Delta conversion16,000 display divisions1,000,000 internal divisions


OUTPUT . . . . . . . . . . .20ma serial loopRS232, RS422/485, 4-20ma, BCD *Baud 600, 1200, 2400, 4800, 9600, O, E, N100 ingredientsSetpoint relays ** Optional

KEYS. . . . . . . . . . . . . SETPOINT, ZERO, TARE, NET/GROSS, F,ENTER, OPR/STB/ESC

ANNUNCIATORS . . . .Zero, MD, Gross, Net, Hold, Alarm, Final,F.Fall, Prelm, OP.PLM, Over, Under, Z.Band

DISPLAY . . . . . . . . . . .Bright easy to see cobalt blue 13mm high999,950 max displayDecimal point selectableDisplay div 1,2,5,10,20,50


SIZE . . . . . . . . . . . . . .5.67”W x 7.76”D x 2.83”H, 4 lbPlastic enclosure, panel mount only

AD-4401


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Indicators



Components

SPECIFICATIONS



CONVERSION . . . . . .17 times/sec display update100/sec sample rate for internal setpointcomparisonDelta sigma conversion16,000 display divisions1,000,000 internal divisions

OUTPUT . . . . . . . . . . .BCDRS232, RS422, RS485 *Baud 600, 1200, 2400, 4800, 9600, O, E, N100 ingredientsSetpoint relays ** Optional

KEYS. . . . . . . . . . . . . F1/F3, F2/F4, SHIFT, CODE RECALL/CODESET, A/a, 1-0,ESCAPE, ENTER,NET/GROSS, TARE, ZERO

ANNUNCIATORS . . . . .Stable, Net, Gross, Full, Zero Band, Fast Flow,Medium Flow, Dribble Flow, Finish, Tare Entry

DISPLAY . . . . . . . . . . .Blue VFD 0.7” (18mm) high16,000 max displayDecimal point selectableDisplay div 1,2,5,10,20,50

SUB DISPLAY . . . . . .(4) lines alpha characters 0.2” high VFDDisplays status information

POWER . . . . . . . . . . .85-250 VAC +/-10%, 50/60Hz, 20 watts

SIZE . . . . . . . . . . . . . .7.5”W x 5.3”D x 3.8”H, 5 lbPlastic enclosure.Table and panel mount

AD-4402 Batching/Network Weighing IndicatorMultiple sequences & functions for filling, mixing, timing functions can be pre-programmedin this unit. Stores 100 sets of ingredient data, 100 sets of recipe codes. Select from 50functions for each of 11 control inputs and 11 control outputs. 100 times per second highspeed sampling. Compact DIN table or panel mounting. Standard RS485 communicationfor up to 32 units. Option cards for CC Link, Device Net & Profibus.Part Number Weight Stock Price CAD-4402 Batching Network Indicator 5 lb 5521 $ 1,780.00

Options CAD-4402-01 Parallel BCD output-open collector 1 lb 5522 375.00AD-4402-02 Relay output 1 lb 5523 375.00AD-4402-03 RS422/485 serial output 1 lb 5524 375.00

AD-4402-04 RS232 serial output 1 lb 5525 375.00AD-4402-05 Parallel I/O 1 lb 5526 375.00AD-4402-07 Analog 4-20ma output 1 lb 5527 495.00

AD-4402-20 CC link interface 1 lb 5528 625.00AD-4402-21 Device Net interface 1 lb 5529 1,049.00AD-4402-22 Profibus interface 1 lb 5530 990.00

AD-4402


Indicators




Components

AD-4405 Weighing IndicatorA general purpose Weighing Indicator. 1/40,000 display resolution. Mount on table, wallor desktop. Bright blue VFD display. Front panel is waterproof, protected to IP65. RS232standard. Counting mode. Digital linearization. Accumulator with auto or manual entry.Optional relay outputs or 4-20ma analog output. 3 input signals for external control, inputsignal can be selected from zero, tare, mode, net/gross, print, M+.NTEP 04-034 III/IIIL 10,000 div.Part Number Weight Stock Price CAD-4405 Weighing Indicator 6 lb 6141 $ 520.00

Options CAD-4405-03 RS422/485/Relays (replaces std RS232) 1 lb 6142 229.00AD-4405-05 RS232 w/Relays (replaces std RS232) 1 lb 6143 189.00

AD-4405-06 Built in printer w/time & date 1 lb 6144 475.00AD-4405-07 Analog output 4-20 ma (replaces std RS232) 1 lb 6145 365.00

SPECIFICATIONS



CONVERSION . . . . . .10 times/sec display updateIntegrating dual slope type40,000 display divisions1,000,000 internal divisions


OUTPUT . . . . . . . . . . .RS232 serialRS422/485/Relays replaces std RS232 *RS232 w/Relays replaces std RS232 *Baud 600, 1200, 2400, 4800, 9600, O, E, N* Optional

KEYS. . . . . . . . . . . . . CODE, SAMPLE, SET POINT, PT, TOTAL,ZERO, TARE, M+, START, STOP, FEED,MODE, NET/GROSS,ON/OFF, PRINT

ANNUNCIATORS . . . . . .Stable, Net Zero, PT, Ready, M+, 1-3, HI, OK, LO


POWER . . . . . . . . . . .100-240 VAC +/-10%, 50/60Hz, 30 VA

SIZE . . . . . . . . . . . . . .10.83”W x 4.37”D x 6.26”H, 6 lbDesktop, panel, wall mountPlastic enclosure, IP65

AD-4405


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

SPECIFICATIONS






KEYS. . . . . . . . . . . . . ZERO, TARE, NET/GROSS, F1, F2, ON/OFF

ANNUNCIATORS . . . . .Stable, Net, Zero, Hi, Ok, Lo, Ready, Batt, M+

DISPLAY . . . . . . . . . . .Large 1” high LCD display999,950 max displayDecimal point selectableDisplay div 1,2,5,10,20,50

POWER . . . . . . . . . . .120 VAC +/-10%, 50/60Hz, 30 VAAC adapter or alkaline C battery operation.180 hours life with (1) 350 ohm load cell70 hours life with (4) 350 ohm load cells

SIZE . . . . . . . . . . . . . .7.56”W x 3.43”D x 3.78”H, 6 lbBracket included for desktop or wall mount.Panel mountPlastic enclosure, IP65

AD-4406

Indicators

AD-4406 Weighing IndicatorA general purpose Weighing Indicator. 1/40,000 display resolution. Mount on table, wallor desktop. Large 1” high LCD display. Front panel is waterproof, protected to IP65.Counting mode. Digital linearization. RS232 standard. Accumulator with auto or manualentry. Optional relay outputs or 4-20ma analog output. 3 input signals for external control.NTEP 04-034 III/IIIL 10,000 div.Part Number Weight Stock Price CAD-4406 Weighing Indicator 6 lb 6146 $ 365.00

Options CAD-4406-03 RS422/485/Relays solid state AC output 1 lb 6147 235.00

Replaces standard RS232AD-4406-05 RS232 w/Relays solid state AC output 1 lb 6148 195.00

Replaces standard RS232

AD-4406-07* Analog output 4-20 ma (replaces std RS232) 1 lb 6149 365.00AD-1681 Rechargeable battery pack 2 lb 3122 175.00

* Analog output card comes with its own AC adapter. When the analog output card isinstalled, (2) AC adapter will be used, one for the basic indicator and one for the analogoutput.





Components

SPECIFICATIONS






KEYS. . . . . . . . . . . . . CODE, SAMPLE, SET POINT, PT, TOTAL,ZERO, TARE, M+, START, STOP, MODE,NET/GROSS,ON/OFF, PRINT, 0-9

ANNUNCIATORS . . . . . .Stable, Net Zero, PT, Ready, M+, 1-3, HI, OK, LO


POWER . . . . . . . . . . .100-240 VAC +/-10%, 50/60Hz, 30 VA

SIZE . . . . . . . . . . . . . .7.83”W x 3.15”D x 8.11”H, 8 lbBracket included for desktop or wall mount.SS enclosure IP65

AD-4407

Indicators

AD-4407 Weighing IndicatorStainless steel washdown industrial enclosure. 1/40,000 display resolution. Mount ontable, wall or desktop. Bright blue VFD display. Front panel is waterproof, protected toIP65. RS232 standard. Counting mode. Digital linearization. Accumulator with auto ormanual entry. Optional relay outputs or 4-20ma analog output.NTEP 04-034 III/IIIL 10,000 div.Part Number Weight Stock Price CAD-4407 Weighing Indicator, SS, 0-9 keys 8 lb 6150 $ 730.00

Options CAD-4407-03 RS422/485/Relays (replaces std RS232) 1 lb 6151 229.00AD-4407-05 RS232 w/Relays (replaces std RS232) 1 lb 6152 189.00AD-4407-07 Analog output 4-20 ma (replaces std RS232) 1 lb 6153 365.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

AD-5000 Programmable Weighing IndicatorOptions and service parts only for the AD-5000,NTEP 95-040 III/IIIL 10,000 div.Part Number Weight Stock Price C

Options CAD-5000-IR Input relay for AD-5000-255 1 lb 2891 65.60

Service Parts C108102 Main board 1 lb 2900 780.00101167 Keyboard 1 lb 2901 169.00Operation manual 1 lb 2902 22.00

SPECIFICATIONS

LOAD CELL . . . . . . . .10 VDC, 240 ma(8) 350 ohm load cellsRemote sensing for long cable runs

ANALOG INPUT . . . . .0.1 µV to 3.9 uV per div

CONVERSION . . . . . .Update 60 times/sec10,000 display divisions H44120,000 display divisions1,000,000 internal divisions

ACCURACY . . . . . . . .0.01% of full scaleSpan +/-5ppm/ deg CZero +/-0.3uV+0.005% offset/ deg C

OUTPUT . . . . . . . . . . .16 setpointsRS232,RS422,RS485,20ma loopBaud 150,300,1200,2400,4800,9600, O, E, NSetpoint relays ** Optional

KEYS. . . . . . . . . . . . . 1-0, F1, F2, CLEAR, ENTER, ZERO, TARE,NET/GROSS, UNITS, PRINT

ANNUNCIATORS . . . . .Gross, Net, Motion, Zero, lb, kg

DISPLAY . . . . . . . . . . .Bright red 1” high w/16 bright levels999,990 max displayDisplay div 1,2,5,10,20,50Status:Gross, Net, Motion, Zero, lb, kg

POWER . . . . . . . . . . .120/240 VAC +/-10%, 50/60Hz, 60 watts240 VAC must be specified when ordering.

SIZE . . . . . . . . . . . . . .8.88”W x 3.63”D x 8.75”H, 11 lbDesk top or wall mountNEMA 4 stainless steel enclosure

AD-5000

Indicators


Indicators




Components

180 Weighing Indicator304 stainless steel enclosure. Versatile mounting bracket for wall or desktop. 0.56” highlyvisible LED. Easy operation, 6 key keypad. On demand serial data. Continuous serialdata. Serial connectivity for Output to One Label/Ticket Printer or PC. Cardinal ControlTicket/Label Printing Configuration. Remote display/keypad for other Cardinal indicators.NTEP 06-105A1 III/III L 5,000 div.Part Number Weight Stock Price C180 Indicator 5 lb 2097 $ 377.00

Cardinal

180Weight Indicator

NEWNEW

SPECIFICATIONS

LOAD CELL . . . . . . . .8 VDC, 240 ma(4) 350 ohm load cells

ANALOG INPUT . . . . .1.28 µV div displayed

CONVERSION . . . . . .Update 1-16 times/sec5,000 display divisions


OUTPUT . . . . . . . . . . .(1) Bi-directional RS232

KEYS. . . . . . . . . . . . . ON/OFF, ZERO, TARE, NET/GROSS, UNITS,PRINT

ANNUNCIATORS . . . . .lb, kg, oz

DISPLAY . . . . . . . . . . .Bright red 6 digit, 7 segment 0.56” high LEDDisplay div 1,2,5,10,20 x 0.1,0.01,0.001

POWER . . . . . . . . . . .12 VDC, 1A UL/CSA listed power supply

SIZE . . . . . . . . . . . . . .7.70”W x 1.28”D x 3.77”H, 2.1 lbDesk top or wall mount304 stainless steel enclosureNema 1/IP40


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Indicators



Components

Cardinal

SPECIFICATIONS

200IndicatorPanel mount


ANALOG INPUT . . . . .0.5 µV per div

CONVERSION . . . . . .Update 20 times/sec10,000 display divisions NTEP


OUTPUT . . . . . . . . . . .(2) RS232 bidirectionalBaud 150,300,1200,2400,4800,9600, O, E, N

KEYS . . . . . . . . . . . . .ZERO, UNITS, PRINT, OVER, UNDER

ANNUNCIATORS . . . .MOTION, ZERO, LB, KG, G, OZ, LB/OZ,UNDER, ACCEPT, OVER, MOTION,NEGATIVE, ZERO

DISPLAY . . . . . . . . . . .Bright red 0.56” high LED6 digits100,000 max


SIZE . . . . . . . . . . . . . .12”W x 3.25”D x 8.75”H, 12 lb3/16 DIN panel mountNEMA 4 aluminum enclosure

200 Weight IndicatorPanel mount digital weight indicator. Mounts to panel with side slides. Wiringconnections are to screw terminals which have as a service feature a plug in terminalblock. 3/16 DIN panel mount cutout. (2) RS232 serial ports. Aluminum housing. 120VAC.Part Number Weight Stock Price B200 Indicator, panel mount 7 lb 5265 $ 731.00





Components

Indicators

Cardinal204 Weight IndicatorStainless steel digital weight indicator. Units selectable are lb, kg, g. AC or battery power.with auto shutoff and sleep mode to save battery life.RS232 serial port. Stainless steelenclosure is not washdown. 120 VAC or (6) C cell batteries.NTEP 02-016, III, 5,000 divPart Number Weight Stock Price B204 Indicator 10 lb 5266 $ 511.00

SPECIFICATIONS

204Indicator

Stainless Steel





OUTPUT . . . . . . . . . . .RS232 bidirectionalBaud 150,300,1200,2400,4800,9600, O, E, N

KEYS . . . . . . . . . . . . .ZERO, TARE, NET/GROSS, UNITS, *,PRINT, ON/OFF


DISPLAY . . . . . . . . . . .LCD 1” high6 digits100,000 max

POWER . . . . . . . . . . .120 VAC +/-10%, 50/60Hz, 6 wattsor (6) C cell batteries.

SIZE . . . . . . . . . . . . . .8”W x 2-1/8”D x 6-5/8”H, 10 lbU bracket for desk top or wall mountNEMA 4 stainless steel enclosure,IP55


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Cardinal

SPECIFICATIONS



CONVERSION . . . . . .Update 1 to 100 times/sec10,000 display divisions NTEP240,000 divisions non NTEP


OUTPUT . . . . . . . . . . .RS232 bidirectionalRS232 output onlyBaud 150,300,1200,2400,4800,9600, O, E, N


ANNUNCIATORS . . . .ZERO, STABLE, TARE, GROSS, NET, lb, oz,kg, g, t, T, lo bat



SIZE . . . . . . . . . . . . . .9”W x 2.75”D x 7”H, 12 lbU bracket for desk top or wall mountNEMA 4 stainless steel washdownenclosure IP66

205 Weight IndicatorDigital weight indicator. Units are lb, lb-oz, oz, T, kg, g, t, custom. Auto shut off and sleepmodes, push button tare, gross, tare, net selection, accumulator, gross and net, adjustablefiltering, selectable lock out, four input lines. (2) RS232 serial ports. Stainless steelenclosure. 120 VAC.NTEP 01-011, III/IIIL, 10,000 divPart Number Weight Stock Price B205 Indicator 12 lb 5268 $ 597.00

Options BAnalog output 1 lb 3177M 220.00RB3 Relay box w/ 3 relays 1 lb 3509M 194.00RB9 Relay box w/ 9 relays 1 lb 3594M 354.00

2XX DN devicenet card 1 lb 7000M 597.002XX-IP Serial to Ethernet 1 lb 7001M 320.002XX-Panel mount kit 1 lb 7002M 91.002XX-BAT kit for 205 210 1 lb 7004M 77.00

Service Parts C8200-D201-0A mainboard 1 lb 4584 663.008200-D100-08 Keypad 1 lb 4585 65.00

205Indicator

Indicators





Components

Indicators

Cardinal210 Weight IndicatorDigital weight indicator. Gross, tare, net selection. Units are lb, lb-oz, oz, T, kg, g, t,custom. Numeric keypad, piece count, checkweighing, (3) preset weight comparators,time/date in 12 or 24 hour format. (2) RS232 serial ports. Stainless steel enclosure. 120VAC.NTEP 01-011, III/IIIL, 10,000 divPart Number Weight Stock Price B210 Indicator, panel mount 12 lb 5269 $ 775.00


2XX DN devicenet card 1 lb 7000M 597.002XX-IP Serial to Ethernet 1 lb 7001M 320.002XX-Panel mount kit 1 lb 7002M 91.002XX-BAT kit for 205 210 1 lb 7004M 77.00

Service Parts C8200-D201-1A Mainboard for 210 1 lb 3201 676.008200-D202-08 Keypad for 210 1 lb 3202 65.00

SPECIFICATIONS







ANNUNCIATORS . . . .ZERO, STABLE, TARE, GROSS, NET, lb, oz,kg, g, t, T, lo bat, PWC1/under, PWC2/accept,PWC3/over



SIZE . . . . . . . . . . . . . .9”W x 2.75”D x 7”H, 12 lbU bracket for desk top or wall mountNEMA 4 stainless steel washdownenclosure IP66

210Indicator


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Cardinal

210FEIndicatorFiberglass

SPECIFICATIONS







ANNUNCIATORS . . . .ZERO, STABLE, TARE, GROSS, NET, lb, oz,kg, g, t, T, lo bat, PWC1/under, PWC2/accept,PWC3/over

DISPLAY . . . . . . . . . . .3” high transflective LCD display with photodetector controlled back lighting6 digits100,000 max


SIZE . . . . . . . . . . . . . .9”W x 2.75”D x 7”H, 7 lbU bracket for desk top or wall mountNEMA 4 fiberglass enclosure IP66

Indicators

210FE Weight IndicatorDigital weight indicator. Gross, tare, net selection. Units are lb, lb-oz, oz, T, kg, g, t,custom. Numeric keypad, piece count, checkweighing, (3) preset weight comparators,time/date in 12 or 24 hour format. (2) RS232 serial ports. Fiberglass enclosure. 120VAC.NTEP 01-011, III/IIIL, 10,000 divPart Number Weight Stock Price B210FE Indicator 7 lb 5270 $ 1,675.00





Components

Indicators

Cardinal

220Indicator

SPECIFICATIONS



CONVERSION . . . . . .Update 1 to 50 times/sec selectable10,000 display divisions NTEP100,000 divisions non NTEP



KEYS . . . . . . . . . . . . .ZERO, TARE, NET/GROSS, UNITS,START/STOP, MEM, ID, ACCUM, DELETE,ON/OFF, COUNT/SAMPLE, TIME/DATE,PRINT, 0-9

ANNUNCIATORS . . . .ZERO, ID, MEM, STABLE, ACCUM, MAX,OVER, UNDER, ACCEPT

DISPLAY . . . . . . . . . . .LCD 0.8” high with backlit12 digits100,000 max


SIZE . . . . . . . . . . . . . .10”W x 4”D x 8”H, 12 lbU bracket for desk top or wall mountNEMA 4 stainless steel enclosure IP66

220 Weight IndicatorFull alpha keypad. 200 ID’s. 6 custom print formats. Multiple print reporting. Fill control.Units lb, kg, g, T, t. (2) RS232 serial ports. Aluminum housing. 120 VAC.NTEP 01-011, III/IIIL, 10,000 divPart Number Weight Stock Price B220 Indicator 12 lb 5271 $ 1,107.00


2XX DN devicenet card 1 lb 7000M 597.002XX-IP Serial to Ethernet 1 lb 7001M 320.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

CI-2001 Weight IndicatorWeighing indicator with an extremely small package size. Front panel keys for ZERO,TARE, GROSS/NET, kg/lb, *(PRINT) ENTER. Full duplex RS232 serial port. ABS plasticenclosure and optional stainless steel enclosure. Stainless Steel swivel stand. 120 VACadapter is included.Canadian AM 5269NTEP 98-103 III 5,000 divPart Number Weight Stock Price D9ABS caseCI-2001A Indicator w/red LED display 4 lb 3669 $ 325.00CI-2001B Indicator w/green LCD display 4 lb 3670 325.00

Stainless Steel case C5CI-2001AS Indicator w/red LED display 6 lb 3859 395.00CI-2001BS Indicator w/green LCD display 6 lb 917 395.00

OptionsCA01-12A-0102 Eprom for CI-2001A for Canada 1 lb 3012 No ChargeCA01-12AS-0102 Eprom for CI-2001AS for Canada 1 lb 6198 No ChargeCA01-12B-0102 Eprom for CI-2001B for Canada 1 lb 3427 No ChargeCA01-12BS-0102 Eprom for CI-2001BS for Canada 1 lb 6199 No ChargeNote: The above Eproms will comply with Canadian Weights & Measures.The push button ZERO will only work when less than 4% of capacity.

Service Parts CAC adapter 120 VAC to 12 VDC 1 lb 3862 34.30Load cell connector 1 lb 3863 14.30

Front overlay for CI-2001A 1 lb 3864 16.00Front overlay for CI-2001B 1 lb 3865 16.00Front overlay for CI-2001AS 1 lb 3866 16.00

SPECIFICATIONS

CI-2001A

CI-2001AS


ANALOG INPUT . . . . .0.5 µV per div, 2 µV per div NTEP

CONVERSION . . . . . .10 updates per sec5,000 display div NTEP30,000 div, industrial200,000 internal counts

OUTPUT . . . . . . . . . . .Full duplex RS232Baud 600, 1200, 2400, 4800, 9600, O, E, N

DISPLAY . . . . . . . . . . .CI-2001A: 0.55” high red LEDCI-2001AS: 1” high red LEDCI-2001B: 1” high green LCD6 digitDecimal point selectableDisplay div 1,2,5,10,20,50,100



SIZE . . . . . . . . . . . . . .ABS plastic: 7.32”W x 2.28”D x 4.72”H, 4 lbSS: 7.87”W x 2.08”D x 6.49”H, 6 lbDesk top or wall mount

Indicators





Components

SPECIFICATIONS

LOAD CELL . . . . . . . .5 VDC, 50 ma(4)350 or (8)700 ohm load cellsRemote sense for long cables

ANALOG INPUT . . . . .0.3 µV per division

CONVERSION . . . . . .15 updates/second10,000 division display NTEP80,000 division display, Industrial500,000 division internal

ACCURACY . . . . . . . .0.01% full scale

OUTPUT . . . . . . . . . . .RS232 duplexRS232 simplexRS485, RS422, 20ma serial loop *Baud 600, 1200, 2400, 4800, 9600, 19,200Time & date* Optional

KEYS . . . . . . . . . . . . .ZERO, MODE, TARE, UNIT, PRINT

ANNUNCIATORS . . . .Zero, Motion, Net, lb, kg, Total

DISPLAY . . . . . . . . . . .Bright red LED 0.8” high6 digits (199,999)Decimal location selectableDiv 1, 2, 5, 10, 20, 50

POWER . . . . . . . . . . .115 VAC +/-10%,60Hz 5 watts230 VAC unit available12 VDC, 24VDC, 26VDC unit availableOptional NiCad batteries

SIZE . . . . . . . . . . . . . .8.75”W x 3.5”D x 5.25”H, 5 lbStainless steel enclosureNEMA 4Desk top or wall mountOptional panel mount

UMC222

UMC222 Digital Weight IndicatorDigital weight indicator for use with strain gage load cells in electronic scales. Bright LEDdisplay is easily readable from a distance. Full digital front panel configuration and zero &span calibration. 10 digit accumulator. Count mode. RFI/EMI filtering and temperaturecompensation to comply with NTEP. Standard (1) duplex and (1) simplex RS232 output.10 update/second conversion rate with adjustable digital averaging and Auto Averaging.Canadian AM-2302NTEP 00-095 III/IIIL 10,000 div.Part Number Weight Stock Price C7UMC222-AAAA Digital weight indicator 115VAC 8 lb 4594 $ 595.00UMC222-ABAA Digital weight indicator 230VAC 8 lb 4595 595.00UMC222-AEAA Digital weight indicator 12, 24, 36VDC 8 lb 4254 775.00

Options CSerial expander assembly RS485, RS422, 20ma loop 1 lb 4596 165.00Panel mount bracket for UMC222 1 lb 4597 45.00Battery option for UMC222 4 lb 4598 205.00

Service Parts C64983 Front panel overlay UMC222 1 lb 4889 47.0065443 Instruction manual 1 lb 2770 35.00

Indicators


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

SPECIFICATIONS

LOAD CELL . . . . . . . .10 VDC fixed short circuit proof, 240 ma(8)350 ohm load cellsRemote sense with PC trace cuts for longcables

ANALOG INPUT . . . . .0.3 µV per division20 to 32 mV full scale

CONVERSION . . . . . .10 updates/second no averaging10,000 count display100,000 count internal


OUTPUT . . . . . . . . . . .RS232 BidirectionalBaud 1200, 2400, 4800, 9600, odd2nd RS232 simplex or 20ma loop *BCD or 4-20ma or 0-10VDC ** Optional

KEYS . . . . . . . . . . . . .ZERO, GROSS/NET, TARE, PRINT

ANNUNCIATORS . . . .Zero, Net, lb, kg, Motion

DISPLAY . . . . . . . . . . .Bright red LED 0.6” high6 decades (999999)Lead zero blankingDecimal location selectableDiv 1,2,5,10,20,50,100

POWER . . . . . . . . . . .117 VAC +/-10%,60Hz 6 watts

SIZE . . . . . . . . . . . . . .7.76”W x 4.09”D x 4.81”H, 7 lbPainted steel enclosure

UMC555

UMC555 Digital Weight IndicatorTilt stand base digital weight indicator for use with strain gage load cells in electronicscales. Bright LED display is easily readable from a distance. Full digital front panelconfiguration and zero & span calibration. RFI/EMI filtering and temperature compensationto comply with NTEP. Can be operated from 120 VAC, 60 Hz or optional battery packw/charger or external 12 VDC source. Standard RS232C bidirectional serial port plussecond simplex RS232C or 20ma current loop serial output. 10 update/second conversionrate with adjustable digital averaging and Auto Averaging.S.WA 4408 Rev 1NTEP 00-005 III/IIIL 10,000 div.Part Number Weight Stock Price C7UMC555-AAAC Digital weight indicator 9 lb 1257 $ 850.00

Options CKBY7116-4 Analog output 4-20ma or 0-10VDC, external 4 lb 1260M 565.00KBT7116-5 Panel mounting kit 1 lb 594M 67.00KBY7116-8 Battery pack w/built in charger 4 lb 1258 175.00

Service Parts CKHY7237B Front panel UMC555 1 lb 578 40.50KFL8924-1 Display/keyboard assy UMC555 1 lb 579 235.00KGY8924-2 CPU main board UMC444/555 2 lb 405 520.00

KBY7116-3 Tilt Stand base 3 lb 676 51.65Instruction manual UMC444, UMC555 1 lb 580 35.0016815 Tech Book for UMC444, UMC555, UMC600 2 lb 530M 89.00

Indicators





Components

SPECIFICATIONS

LOAD CELL . . . . . . . .5 VDC battery unit will drive(4)350 or (8)700 ohm load cellsAC unit is 10 VDC will drive(8)350 ohm load cells.

ANALOG INPUT . . . . .0.3 µV per divCONVERSION . . . . . .10 updates per sec

20 ms integration time80,000 display div100,000 internal div

ACCURACY . . . . . . . .0.01% full scaleOUTPUT . . . . . . . . . . .(2)20ma serial loop or 5VDC RS232

Baud 300, 600, 1200, 2400, 4800, 9600, odd2 setpoints w/preact & dribble

KEYS . . . . . . . . . . . . .ZERO, NET/GROSS, TARE, lb/kg CONV,PRINT, 1 SET POINT, 2 SET POINT, TARERECALL

ANNUNCIATORS . . . .Zero, Net, Gross, lb, kg, MotionDISPLAY . . . . . . . . . . .0.56” LED or LCD

6 digit 999999Decimal point selectableDivision 1,2,5,10

POWER . . . . . . . . . . .115 VAC +/-10%, 50/60Hz, 6 wattsSIZE . . . . . . . . . . . . . .9”W x 4”D x 6”H, 13 lb

NEMA 4 stainless steel enclosure

UMC600

UMC600 Digital weight indicatorFull digital front panel calibration. NEMA 4 stainless steel enclosure. Full RFI/EMIshielding to comply w/H44. Two standard separate serial outputs, either 20 ma serialcurrent loop or 5 VDC RS232C. Tilt-stand base for desk or wall mounting. Adjustabledigital averaging. Two setpoints with preact & dribble.The UMC600 has a program which will record the incoming and outgoing weights of atruck, and provide a printed record containing “Gross - Tare - Net”. (300) transactions arestored each with a six (6) digit ID number. The unit can be used in any of three modes: 1.Full truck in. 2. Empty truck in. 3. Fixed tare mode.S.WA 4131 Rev 2NTEP 00-004 III/IIIL 10,000 divPart Number Weight Stock Price C7UMC600-AAAC 115VAC, LED display 13 lb 469 $ 1,095.00UMC600-ACAC 115VAC, & int battery, LED display 15 lb 218 1,170.00UMC600-DHAC 115VAC, LED, flange mtg, AC relay 13 lb 744 1,460.00UMC600-AFAC 115VAC, LED, 0-10VDC, 4-20ma output 13 lb 798 1,490.00UMC600-AEAC 12VDC on board weighing 13 lb 293 1,095.00

Need external 12VDC power supplyUMC600-ABAC 220VAC, LED display 13 lb 1786 1,095.00UMC600-AKAC 115VAC, LED or display 10 lb 1698 1,615.00

C5UMC600 uncased 115VAC LED display 5 lb 6188 850.00Options CKBT7116-5 Panel mounting kit 1 lb 594M 67.00KBT7116-13 RS422/RS485 output 1 lb 531 210.00

KBY7116-4 Analog output 4-20ma or 0-10VDC, external 4 lb 1260M 565.00KBT7116-11 Solid State Relay option board AC only 1 lb 1595 265.00

20VAC to 120VAC, 5ma to 1 ampKBT7116-12 Dry Contact Relay option board DC only 1 lb 1475 235.00

100VDC max, 0.5 amps max, 10 VA maxKBT7116-16 Four solid state relay board 1 lb 2437 265.00

20VAC to 120VAC, 5ma to 1 ampKBT7116-17 Analog output chips 0-10VDC or 4-20ma 1 lb 3997M 290.00

Requires KBT7116-16KBT7116-18 Analog output board 0-10VDC or 4-20ma 1 lb 278M 395.00KBD7431A Solid state relay 1 lb 2439 39.20Service Parts CMS3106A-14S-6S load cell connector 6 sockets w/collar 1 lb 1070M 15.30KGV8924-2 display assembly LED 1 lb 243 290.00

KHK7237 Front panel overlay 1 lb 964 40.50KGW8924-1 Switch board assembly 1 lb 3984 160.00KMK7237B Display Lens Red 1 lb 3985 20.90

KBT7116-8 CPU assembly (120VAC units only) 3 lb 612 650.00KB8902A Replacement battery 3 lb 963 95.00KBT7116-2 Tilt stand base kit 3 lb 592 55.00KBT7116-4 6 pin connector w/cable assembly 1 lb 700 68.00

Also used on UMC444 & UMC55530261 Instruction manual 1 lb 466 35.0016815 Tech Book for UMC444, UMC555, UMC600 2 lb 530M 89.00

Indicators


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

DS100Weight Indicator


ANALOG INPUT . . . . .0.5 µV to 3.9 µV per div



OUTPUT . . . . . . . . . . .RS232 bidirectional

KEYS . . . . . . . . . . . . .GROSS/NET, TARE, ZERO/ON/OFF, UNITS,PRINT

ANNUNCIATORS . . . .LB, KG, G, OZ, NET, ZERO, BATT, MOT

DISPLAY . . . . . . . . . . .Bright red 0.56” high LED6 digits

POWER . . . . . . . . . . .115 VAC, 60Hz, Transformer, UL/ULc(230 VAC Optional)

SIZE . . . . . . . . . . . . . .7.5”W x 2”D x 4.25”H, 4 lbU bracket for table, wall or shelf mount

SPECIFICATIONS

DS100 Weight IndicatorAdaptable and economically priced, the DS100 includes many features found on muchhigher priced indicators. U bracket mount for table wall or shelf. Weighing units: lb, kg, g,oz, lb/oz. 1 year warranty.NTEP 05-061 Class III 5,000 divPart Number Weight Stock Price CDS100 Weight indicator 4 lb 3689 $ 295.00DS100BM Indicator baggage scale 5 lb 7230 350.00

Service Parts CXFR0035 Wall mount transformer 115VAC 1 lb 3779 46.60

Indicators

DS100BMBaggage scale indicator

NEWNEW





Components

2200B Process and batch IndicatorsFlexibility, simplicity and easy to use saving you time and money. Full function keypadallows for simple entry of digital tare, time and date, accumulator eight product ID’s, eightsetpoint outputs. Start, stop and pause batching processes with color coded Start andStop keys. Standard software features such as programmable data communication,multiple ID numbers, accumulator, counter and learning preacts. Configure batchingroutines of up to 100 steps incorporating 35 commands with Point and Click, with the freeWindows based Dimension Software. Two standard RS-232 ports. Two year parts andlabor warranty. 6”H x 10”W x 3”D.NTEP pending 10,000d Class IIIPart Number Weight Stock Price2200B 9 lb 7207 $ 750.00





OUTPUT . . . . . . . . . . .Two configurable bi directional RS 232Serial Ports, Eight Digital Outputs

KEYS . . . . . . . . . . . . .TARE, GROSS/NET, ZERO, PRINT, UNITS,ACCUM, ID, CLEAR, ENTER, SET POINT,DECIMAL POINT, START, STOP, 0-9KEYPAD

ANNUNCIATORS . . . .LB, OZ, KG, G or LB, OZ

DISPLAY . . . . . . . . . . .Bright red 0.56” high LED6 digits

POWER . . . . . . . . . . .115 VAC, 50/60Hz, Internal rechargeablebattery, (230 VAC Optional)

SIZE . . . . . . . . . . . . . .10”W x 3”D x 4.6”H

SPECIFICATIONS

NEWNEW

2200BProcess and Batch Indicator

Indicators


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components




ACCURACY . . . . . . . .0.01% of full scaleSpan +/-5ppm/ deg CZero +/-0.3uV+0.005% offset/ deg C

OUTPUT . . . . . . . . . . .RS232 bidirectionalRS485 *Baud 150,300,1200,2400,4800,9600, O, E, N* Optional





SIZE . . . . . . . . . . . . . .12”W x 3.25”D x 8.75”H, 12 lbU bracket for desk top or wall mountNEMA 4 stainless steel enclosure

SPECIFICATIONS

4300MOver-Accept-Under

4300M Over-Accept-Under Weighing IndicatorOver-Accept-Under Weighing Indicator. U bracket for mounting on table, wall or undershelf. Bright blue VFD display. Front panel is waterproof, protected to IP65. RS232standard. (6) built in print formats. Optional RS485 output. Optional remote switchNTEP 97-038 III 10,000 div.Part Number Weight Stock Price B54300M Check Weigh Indicator 12 lb 6216 $ 680.00

Service Parts CSUB0445 Main board 1 lb 6219 586.004300-006 Key sheet for 4300M 1 lb 6220 186.00

Indicators





Components

SPECIFICATIONS

LOAD CELL . . . . . . . .5 VDC 150 mA(4) 350 or (8) 700 ohm load cells


CONVERSION . . . . . .44 updates per sec10,000 display div NTEP50,000 div max


OUTPUT . . . . . . . . . . .(2) Serial interfaces Choice of RS232,RS485, USB 2.0, washdown Ethernet (wiredor wireless).

KEYS. . . . . . . . . . . . . .ZERO (optional units, print)

ANNUNCIATORS . . . .lb, kg, oz, lb & oz

DISPLAY . . . . . . . . . . .Bright red LED display

POWER . . . . . . . . . . .115 VAC 50/60Hz, 10 watts

SIZE . . . . . . . . . . . . . .16”W x 16”D x 9”H304 Stainless steel enclosureNema 4Versatile U bracket mount

7400MDigital Weight Indicator

7400M Digital Weight IndicatorWash down safe. The 7400M digital weight indicator can be mounted on a table, wall oreven under a shelf using the versatile U bracket mount. The 304 stainless steel designensures easy cleanability and long life. Bright red LED displays in lb, kg, oz, lb & oz.This versatile digital weight indicator can be used for replacement or retrofit applicationswhere the scale base need not be replaced. Zero Band Checkweighing is an includedfeature with OVER, ACCEPT, UNDER indicators. User definable from 1 to 999,000 lb.An innovative gasket design have been combined to allow the 7400 indicator to meet thestringent NEMA 4X and IP69K classifications for washdown protection. Optionalinterfaces: Programmable, Bi directional RS-232 Interface, RS-485, 4-20mA, Fiber Optic,Washdown Ethernet, user defineable data output. Optional setpoints: Up to 8 setpointsare available for use in process control. Accept/Reject, 4 internal relays or 8 digitaloutputs. 2 year warranty.NTEP 99-129A1 Class III 10,000 divCanada AM-5347Part Number Weight Stock Price C7400M Digital Weight Indicator 12 lb 6563 $ 680.00

NEWNEW

Indicators


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

8000XLMDigital Weight Indicator

SPECIFICATIONS

LOAD CELL . . . . . . . .5 VDC(4)350 ohm load cells

ANALOG INPUT . . . . .0.8 µV to 36 µV per div (NTEP)

CONVERSION . . . . . .3 updates per second10,000 div


OUTPUT . . . . . . . . . . .RS232 standard, bidirectional4 programmable print settingsFiber optic interface *USB 2.0 *RS485 interface *Washdown Ethernet *User definable data output ** Optional

KEYS . . . . . . . . . . . . .ZERO, UNITS, PRINT

ANNUNCIATORS . . . .lb, kg, g, oz, or lb & oz

DISPLAY . . . . . . . . . . .Red LED, 1“ high6 digit 999,999 display


POWER . . . . . . . . . . .115 VAC 50/60 Hz, 0.45 watts

SIZE . . . . . . . . . . . . . .6.25”H x 10”W x 3.5”DNEMA 4X, IP69K

Indicators

8000XLM Digital Weight IndicatorThe new Guardian case design incorporates a new captured gasket design, a thickerstainless steel case and a super tough control panel resulting in an indicator that is evenmore washdown safe than before. Bright red LED displays in lb, kg, oz, or lb & oz. Userdefinable from 1 to 999,000 lb. U bracket for wall, table or under shelf mount. Built inbattery charger takes only 4 hours to recharge a fully depleted battery while indicator isstill in use. AC or DC operation. The sealed, self contained battery inside the 8000XLMprovides at least 60 hours of continuous use and even more when used in the “AutoShutoff” mode. USDA approved. 2 year warranty.6.25”H x 10”W x 3.5”DNTEP 99-129 Class III 10,000 divCanada AM-5347Part Number Weight Stock Price C8000XLM 15 lb 2062 $ 795.00





Components

CS31 Weight IndicatorDesigned for portable remote locations, rentals and counting applications. Use it as anIndicator or as a counting scale. Keyboard for digital input of tare, average piece weightand sample. 16 dual function keys. Keys for TARE, APW, SAMPLE, FUNCTION,GROSS/NET, LB/KG, ADD, TOTAL, CLEAR TOTAL, ZERO, COUNT OUT. Easy to readbacklit LED display. Lb/Kg selectable. Optional input from second scale platform. NEMA4 Stainless Steel enclosure and swivel stand. Power is 8 D cell batteries. Up to 4,000hours of continuous use on single cell applications.NTEP 99-207 III 5,000 divPart Number Weight Stock Price C5CS31-0001 Battery operated indicator 10 lb 127 $ 595.00

CS31

SPECIFICATIONS



CONVERSION . . . . . .10 updates per sec5,000 display div NTEP999,999 piece count display100,000 div, industrial1,000,000 div internal

OUTPUT . . . . . . . . . . .None

DISPLAY . . . . . . . . . . .LCD, 6 digit 0.5” highDecimal point selectableDisplay div 1,2,5,10,20,50,100,200


POWER . . . . . . . . . . .(8) “D” cell batteries

SIZE . . . . . . . . . . . . . .10”W x 5.5”D x 6.5”H, 10 lbNEMA 4 Stainless Steel enclosureDesk top or wall mount

Indicators


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components



CONVERSION . . . . . .Update 15 times/sec10,000 display divisions80,000 internal divisions


OUTPUT . . . . . . . . . . .20ma loop Baud 150, 300, 1200, 2400, 4800,9600, 19200, O, E, NDual port RS232 and 20ma loop *Parallel BCD *Analog 4-20ma or 0-5 VDC ** Optional

KEYS . . . . . . . . . . . . .ZERO, TARE, NET/GROSS, PRINT, 0-9keypad, CLEAR, ENTER, SELECT

ANNUNCIATORS . . . .SBL, ZERO, TARE, NET, PIECES

DISPLAY . . . . . . . . . . .Blue vacuum fluorescent 0.5” high999,999 max displayDivisions 1,2,5,10,20,50

POWER . . . . . . . . . . .120/240 VAC +/-10%, 50/60Hz, 25 watts

SIZE . . . . . . . . . . . . . .10”W x 5”D x 12”H, 18 lbWall mountNEMA 12 painted steel enclosure

SPECIFICATIONS

FlexWeigh

DWM IV

DWM IV Digital Weight MeterProven as one of the most successful indicators of all time. Designed for ruggedIndustrial applications. Wall mount NEMA 12 painted steel enclosure. 7 digit numericidentification, 6 digit consecutive number increments each time the unit prints. 10 weightaccumulation registers with sub-total/total. 20ma current loop output with baud rates 150to 19,200. Remote control inputs for ZERO, TARE, NET/GROSS, PRINT.NTEP 95-040 III/IIIL 10,000 div.Part Number Weight Stock Price B5DWM-IV Digital weight meter 18 lb 213 $ 1,350.00

Options B5MA3091 4-20ma Analog output for DWM-IV 1 lb 3354 420.00OBB Option bracket for DWM-IV 1 lb 3355 40.80

Used to mount analog output inside indicator.

Indicators


Indicators




Components

250 Weight Indicator - GSEThe 250 indicator has selectable weighing units lb, kg, g, t. Non volatile time and dateclock. Liquid crystal display with LED backlight. AC or battery operation. Panel, columnor desktop mounting. Two set point outputs. Sigma Delta A/D converter. Can beconfigured with the keypad or thru the RS232 port or through IR link with GSE View PCsoftware. A function key can be configured to select units, hold a weight reading, displayan absolute peak weight, count parts or use live weight to stabilize a moving mass suchas livestock. To eliminate errors any or all keys can be disabled. Operates with ACadapter or (4) AA batteries with 38 hours life.NTEP 05-119A2 III/IIIL 10,000 divPart Number Weight Stock Price B5GSE-250 weight indicator 1 lb 2996 $ 400.00

LOAD CELL . . . . . . . .5 VDC(4)350 ohm load cellsRemote sense for long cable runs


CONVERSION . . . . . .Update 60 times/sec30,000 display div8,388,608 internal div, 24 bit A/D


OUTPUT . . . . . . . . . . .RS232 communication port2400, 4800, 600 baud(2) set point outputs(1) input for your choice of Tare, Print, Zero,Gross/Net or Function key

KEYS . . . . . . . . . . . . .POWER, ZERO, TARE, GROSS/NET, PRINT,FUNCTION

ANNUNCIATORS . . . .Zero, Net, Motion, Over, Under, Zero band,Hold, Low battery

DISPLAY . . . . . . . . . . .LED 0.8” high 6 digit w/backlitDecimal point selectable

POWER . . . . . . . . . . .120 VAC adapter or (4) AA batteries

SIZE . . . . . . . . . . . . . .6.5”W x 3.8”D x 3.2”H, 1 lbPanel, column, desktop mount.ABS plastic w/silicone rubber keypad, IP66

SPECIFICATIONS

GSE-250

GSE-250XExtreme Washdown Indicator


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Indicators



Components

250X Extreme Washdown Indicator - GSEIP69K, highest level of washdown protection in the industry. Constructed from a uniqueblend of high impact plastics. This progressive material is preferred over stainless steelbecause it will not form condensation, expand or contract when exposed to extreme shiftsin temperature. 6 digit LCD backlit display. Cut-proof, 6 key capacitive keypad withprogrammable function key. Visual response keypad upon key activation. Bright red,green and yellow status lights provide Over, Pass, and Under protection for checkweighing applications. RS232 automatic transmit, network or printer outputs. Infra-redconnector for optional GSE-Link PC cable. 3 power versions are available, AC, DC withbattery charger and DC input.Part Number Weight Stock Price B520250X-80020 90-240 VAC 5 lb 4973 $ 750.0020250X-81020 DC w/ battery charger 5 lb 4974 1,000.00

Options B20-20-43706 AC Adapter 90-240 VAC 1 lb 4976 110.0024250X-120B1 Battery module 1 lb 4977 300.0024250X-121B1 Battery charger, wall mount 1 lb 4978 65.00



CONVERSION . . . . . .Update 20 times/sec30,000 display div8,388,608 internal div, 24 bit A/D


OUTPUT . . . . . . . . . . .RS232 communication port2400, 4800, 9600 baud(3) set point outputs

KEYS . . . . . . . . . . . . .POWER, ZERO, TARE, GROSS/NET, PRINT,FUNCTION

ANNUNCIATORS . . . .Over, Pass, Under

DISPLAY . . . . . . . . . . .LED backlit LCD 0.8” high 6 digit

POWER . . . . . . . . . . .100-240 VAC adapter 50/60 MHz

SIZE . . . . . . . . . . . . . .9.8”W x 6.4”D x 4.7”H, 4.5 lbWall, column, desktop mount.Food grade plastic, IP69K

SPECIFICATIONS

NEWNEW





Components

Indicators

350 Weight Indicators - GSEA sophisticated indicator at an affordable price. 20-bit A/D converter, parts counting. Sixselectable fixed-format and one custom format data output string. Zinc die cast or Nema4X stainless steel enclosure.NTEP 98-092 III/IIIL 10,000 divPart Number Weight Stock Price B5GSE-350 Stainless steel weight indicator 8 lb 4045 $ 715.00GSE-350 weight indicator w/zinc die cast enclosure 8 lb 4046 550.00

Options C24350B-302C0 Swivel bracket for SS enclosure 2 lb 4048 72.9024350B-121B1 Rechargeable battery, SS enclosure 5 lb 4125 284.0024350B-120B1 Rechargeable battery, zinc enclosure 5 lb 4160 247.00

Service Parts CMain board for GSE-350 stainless steel 1 lb 465 483.00Main board for GSE-350 zinc die cast 1 lb 2438 442.00

44-35-34678 Keypad assy, English 1 lb 3703 59.90

GSE 350

GSE-350 Zinc


ANALOG INPUT . . . . .0.1 to 20 mV/V

CONVERSION . . . . . .Update 60 times/sec10,000 display div (NTEP)100,000 display div, industrial


OUTPUT . . . . . . . . . . .RS232 bi-directional outputBaud 150, 300, 600, 1200, 2400, 4800, 9600RS484 serial output (replaces RS232) *0-10V, 0-20 mA, 4-20mA analog output *3 solid state relay module (mounts internally)** Optional

KEYS. . . . . . . . . . . . . ZERO/CLR, PRINT, UNITS, TARE,SELECT/ON

ANNUNCIATORS. . . . lb, kg, Neg, Mot, Zero, Gross, Net, Quantity,Setpoint 1, 2, 3

DISPLAY . . . . . . . . . . .LED display 22mm 0.8” high6 digit 999,990 displayDecimal point selectable

POWER . . . . . . . . . . .Stainless Steel: 120 (85-265) VAC60 (47-440) Hz, internal transformerZinc die cast: 120 VAC, 60 Hz AC adapterOptional battery: 120 VAC or .12-36 VDC

SIZE . . . . . . . . . . . . . .7.83”W x 2.65”D x 5.75”H, 7 lb

SPECIFICATIONS


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

460 & 465 Weight Indicators - GSEAn elevated level of flexibility over elementary weighing indicators. VFD display.Selectable weighing units. Truck weighing programs, check weighing routines, partscounting and inventory control. Filing and batching, multi range scale indication, peakweight hold. Programmable in “C” programming language or with Rabbet software. 15variable data registers. 2 scale input signals. 4K byte database memory. 15 independentprogrammable database structures. Durable elastomeric keys. 2 year limited warranty.NTEP 01-031A1Part Number Weight Stock Price B5GSE-460 Stainless steel weight indicator 9 lb 4276 $ 880.00GSE-465 Stainless steel weight indicator 9 lb 4861 1,025.00

Service Parts for 450 & 455 C420783-28937 Keypad assembly for GSE-450 1 lb 4105 80.35

Service Parts for 550 CMainboard for GSE 550 1 lb 4413 957.00

GSE-465

GSE-460


ANALOG INPUT . . . . .0.4 µV to 1.0 uV per div (NTEP)

CONVERSION . . . . . .Update 10 times/sec10,000 display div (NTEP)100,000 display div, industrial


OUTPUT . . . . . . . . . . .RS232 bi-directional outputBaud rate 150-58,300 bps

KEYS. . . . . . . . . . . . . 460: ZERO, PRINT, UNITS, TARE,SELECT465: ZERO, PRINT, UNITS, TARE, SELECT,ENTER, SCALE SELECT, CLEAR, 1FUNCTION, TARGET, ID, 0-9

ANNUNCIATORS . . . .Zero, Stable, Gross, Net, lb, kg, g, oz

DISPLAY . . . . . . . . . . .Vacuum fluorescent displayPrimary 0.75” high 6 digitSecondary 10 character dot matrix VFDfor status indicationDecimal point selectable


POWER . . . . . . . . . . .90-250 VAC @ 0.5 amp10-28 VDC @ 20W (Optional)

SIZE . . . . . . . . . . . . . .460: 11”W x 2.13”D x 7.25”H, 6 lb465: 11”W x 2.4” x 9”H, 6.5 lb

SPECIFICATIONS

Indicators





Components

Indicators

GSE525 Digital Weight Indicator - GSEWeighing indicator from a quality manufacturer like GSE. Selectable weighing units lb, kg,and one from (lb-oz, g, oz). Parts counting capability with dedicated SAMPLE key. Builtin standard setpoint program with LEARN software to automatically correct dribble value.Remote contact closure input for TARE, PRINT, ZERO, START, STOP. RS232 serial port.Time and date standard (not battery backed). 2 year warranty. 90-250 VAC, 50/60 Hz.NTEP 00-097 III IIIL 10,000 divPart Number Weight Stock Price B5GE525 weight indicator LED, 0-9 keypad 10 lb 5727 $ 699.00

Options A5Output relay module with option bracket 1 lb 5730 179.00Analog output module only 1 lb 5731 245.00

GES525

LOAD CELL . . . . . . . .10 VDC at 180ma(6)350 or (12)700 ohm load cells


CONVERSION . . . . . .18 updates per second10,000 display divisions, NTEP100,000 divisions, Industrial500,000 internal counts


OUTPUT . . . . . . . . . . .RS232 serial outputBaud 150, 300, 600, 1200, 2400, 4800, 96007/8 data bits, O/E/N parity, 1/2 stop20ma serial *RS485 *Set points (3) N.O. contacts *4-20ma analog output ** Optional

KEYS. . . . . . . . . . . . . .ZERO, TARE, DISPLAY SELECT, UNITS,PRINT/ON, 0-9, SAMPLE/ ENTER

ANNUNCIATORS. . . . Zero, Motion, Gross, Net, Quantity, lb, kg

DISPLAY . . . . . . . . . . .Red LED 0.8”LCD 1” on 525 only6 digits 7 segments eachDecimal location selectableFixed zerosDiv 1, 2, 5, 10, 20, 50

POWER . . . . . . . . . . .90-250 VAC, 50/60Hz, 25 wattsOptional rechargeable battery

SIZE . . . . . . . . . . . . . .525: 11.8”W x 4.3”D x 7.25”H, 10 lbMounting bracket adds 2” to heightNema 4 IP66 stainless steel enclosure

SPECIFICATIONS


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

GSE-660

GSE-665


ANALOG INPUT . . . . .0.4 µV to 1.0 µV per div (NTEP)

CONVERSION . . . . . .Update 60 times/sec100,000 display div (NTEP)100,000,000 internal div

OUTPUT . . . . . . . . . . .(3) RS232 communication portsRS485 and 20mA*DeviceNet, Profibus, Ethernet*150-115K bpsOptional*

DISPLAY . . . . . . . . . . .Vacuum fluorescent displayPrimary 0.75” high 6 digitSecondary 10 character dot matrix VFDfor status indication


POWER . . . . . . . . . . .90-250 VAC @ 0.5 amp10-32 VDC @ 20W (Optional)

SIZE . . . . . . . . . . . . . .660: , 11”W x 2.25”D x 8.38”H, 11 lb665: , 11”W x 2.20”D x 11.38”H, 14 lb

SPECIFICATIONS

660 & 665 Weight Indicator - GSEIntrinsically safe indicators. VFD or LCD display. Selectable weighing units. Time anddate clock. Parts counting, vehicle weighing, batching and filling, process control,inventory control, shipping and receiving. Front panel keys are durable elastomericrubber. Keys are: ZERO, PRINT, UNITS, TARE, SELECT, ENTER, 5 FUNCTION, SCALESELECT, CLEAR ID, START, STOP, SETUP, FULL NUMERIC 0-9. NEMA 4X stainlesssteel enclosure, IP66.NTEP 01-013A1Part Number Weight Stock Price B5GSE-665 indicator LCD display 14 lb 7018 $ 1,950.00GSE-660 indicator 11 lb 7019 1,550.00

Options B5GSE-665 database board 2 lb 7020 172.00

Indicators





Components

Indicators

410 & 422 Multi Function Weight Indicator - IDSPreprogrammed with 10 different modes of operation to accommodate most of the basicscale applications. Keys for ZERO, TARE, GROSS/NET, UNITS, PRINT, CLEAR, ITEM, +,-,

Mode 0: Normal for basic gross or net weighing.Mode 1: Keyboard Tare for keyboard entry of tare weight for net weight calculation.Mode 2: Accumulate w/running total for gross or net weights and running total for job,lot, etc. Calculates G,T,N totalsMode 3: Print Weight w/Subtotal & Total for job or lot subtotal. Totalize and clear at theend of the run.Mode 4: Manual (Axle) Weigh Push the PRINT button to sequentially number and print aseries of weighments. Push Total to print and clear the total and sequence number.Mode 5: Auto (Axle) Weigh Similar to Mode 4 except printing is automatic when motionstops. Traffic light control, trip level selection and delay times for control functions.Mode 6: Auto Axle Weigh on Long Scales Scale is automatically tared after eachweighment. Operation and controls as in Mode 5.Mode 7: Peak Hold for display and print of the peak weight in gross or net mode.Mode 8: Over/Under Checkweigh has (3) TTL outputs and (2) setpoints. Outputs for usewith lights or alarms to indicate OVER, UNDER or BETWEEN setpoints.Mode 9: Bulkweigh has a setpoint with remote start/stop option and fill control relaysignal. Scale empty weight and draft weights are configurable. Use for multiple drafts withtotal and subtotal printing.Canadian AM 5216NTEP 96-133 III 10,000 divPart Number Weight Stock Price CIDS 422 Multi Function Weight Indicator 9 lb 1661 $ 659.95

IDS 410 Multi Function Weight Indicator w/SS enclosure 8 lb 4063 769.95IDS 410HS High Speed Indicator w/SS enclosure 9 lb 1769 880.90

100 Samples per second

Options CTime & date clock option for IDS 410 8 lb 4064 120.00

IDS 410

IDS 422

SPECIFICATIONS



CONVERSION . . . . . .60 updates per sec10,000 divisions H44 NTEP200,000 divisions industrial1,048,000 divisions internal

OUTPUT . . . . . . . . . . .Port 1 RS232 or 20ma current loopPort 2 RS232 or RS485Baud 150,300,1200,2400,4800,9600, O, E, NDigital Port

(3)TTL outputs(3)TTL inputs

KEYS . . . . . . . . . . . . .ZERO, TARE, GROSS/NET, UNITS, PRINT

ANNUNCIATORS . . . .Gross, Net, Motion, Zero, lb, kg

DISPLAY . . . . . . . . . . .LED 6 digit 1” highDecimal point selectableDisplay div 1,2,5,10,20,50


POWER . . . . . . . . . . .115VAC +/-10%, 50/60 Hz, 10 wattsor 12 to 28 VDC

SIZE . . . . . . . . . . . . . .11”W x 2”D x 8”H, 9 lb410: Stainless Steel422: NEMA 4 painted steel enclosureDesk top or wall mount


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

SPECIFICATIONS

IDS 430Weight Indicator

LOAD CELL . . . . . . . .10 VDC, 345 ma(12)350 ohm load cellsRemote sensing for long cable runs


CONVERSION . . . . . .60 or 100 updates per sec10,000 divisions H44 NTEP200,000 divisions industrial1,048,000 divisions internal

ACCURACY . . . . . . . .0.0015% of full scale OUTPUT Port 1Simplex RS232 or 20ma current loopPort 2 Duplex RS232, 20ma or RS485Baud 150 to 38,500, O, E, NDigital Port

(3) outputs low active TTL(3) inputs low active TTL

KEYS . . . . . . . . . . . . .Zero, Tare, Gross/Net, Units, Print, Clear,Enter, F1, F2, 0-9 keypad

ANNUNCIATORS . . . .Gross, Net, Motion, Zero, lb, kg

DISPLAY . . . . . . . . . . .Red LED 6 digit 1” highDecimal point selectableDisplay div 1,2,5,10,20,50,100

POWER . . . . . . . . . . .115VAC +/-10%, 50/60 Hz, 10 wattsor 12 to 28 VDC

SIZE . . . . . . . . . . . . . .9”W x 2”D x 8”H, 8 lbStainless SteelNEMA 4Desk top or wall mount

IDS 440Weight Indicator

NEWNEW

Indicators

430 Weight Indicator - IDSPreprogrammed with 8 different modes of operation to accommodate most of the basicscale applications. Keys for ZERO, TARE, GROSS/NET, UNITS, PRINT, CLEAR,ENTER, F1, F2, 0 - 9 keypad. Indicator lights for GROSS, NET, MOTION, ZERO, lb, kg.

Mode 0: Normal Basic gross or net mode weighing.Mode 1: Fill to Setpoint Single setpoint fill with relay output control and weigh print.Mode 2: Over/Under Checkweigh Provides (3) TTL outputs and (2) setpoints. Outputsfor use with lights or alarms to indicate OVER, UNDER or BETWEEN setpoints.Mode 3: Vehicle Weigh In/Out with totals Weigh In/Out program for up to 500 vehicles.Maintains running totals for each vehicle. Provides reporting functions.Mode 4: Multi Container/Axle Auto Weighing Auto weighs and prints each weightplaced on the scale. Each weight is sequentially numbered and accumulated. The totalcan be printed manually or automatically. Provides traffic light control.Mode 5: Auto Axle Weigh on Long Scales Same as mode 4 but previous axles areauto tared.Mode 6: ID Tare, Print and Total Provides tare entry and recall by ID. Prints ID,sequence # and GTN weights. Keeps running totals by ID. Provides reporting functions.Mode 7: Peak Hold Display or print the peak gross or net weight detected.Canadian AM 5216NTEP 96-133 III 10,000 divPart Number Weight Stock Price CIDS 430 Weight Indicator 8 lb 2207 $ 934.95IDS 440 Weight Indicator 8 lb 1755 1,309.00

Options CTime & date clock option for IDS 430 8 lb 2469 120.00OP430A/O KIT Analog output board 2 lb 4507 243.00

8501 Relay board, 4 channel 2 lb 4504 399.004101 Output relay, solid state 1 lb 4505 61.004104 Input relay, solid state 1 lb 4506 61.00Note: Relay board is necessary to use the input or output relays.





Components

Indicators

Magic Programmable Weighing Indicator - Master KAC square wave technology for reduced noise and interference. Bright 6 digit LED 0.8”high display. High process speed up to 90 measurements per second. High/low/go,manual operation. Internal time and date with battery back up. Custom ticket printout.Com port # 1: RS232 output. Adjustable wall mount bracket, non stainless steel.NTEP (pending) Class III/IIL 10,000 div.Part Number Weight Stock Price CMagic Indicator 5 lb 6676 $ 495.00Magic indicator w/ water proof housing SS IP65 1 lb 6677 695.00

Options CCom port #2: Profibus DP output 1 lb 6678 495.00Analog 0-10V output 1 lb 6679 220.00Analog 4-20mA output 1 lb 6680 220.00

RS485 output 1 lb 6681 175.00RS232 output 1 lb 6682 145.00Current loop output 1 lb 6683 155.00Adjustable wall mount SS bracket 1 lb 6695M 45.00Metal desk mount stand 1 lb 6684 95.00

Service Parts COperating manual 1 lb 6685 25.00CPU and display board for Magic 1 lb 6686 450.00Membrane switch panel 1 lb 6687 45.00

Adaptor AC/DC 1 lb 6688 25.00Power supply board for Magic SS 1 lb 6689 75.00

Magic Indicator

SPECIFICATIONS

LOAD CELL . . . . . . . .5VAC (6) 350 ohm load cells

ANALOG INPUT . . . . .0.1µV/div

CONVERSION . . . . . .10 or 90 update rate1:10,000 displayed NTEP1:100,000 internal

ACCURACY . . . . . . . ..0.1% full scale

OUTPUT . . . . . . . . . . .COM1 RS232/485, current loop,analog 0-10 VDC, 4-20mA output

KEYS . . . . . . . . . . . . .ZERO, GROSS, NET, TARE, PRINTOUT,CONFIGURATION, CONTROL

ANNUNCIATORS . . . .Zero, Net, Setpoint 1, Setpoint 2, Setpoint 3,kg, lb

DISPLAY . . . . . . . . . . .Bright red LED 0.55” high6 digits (199,999)

POWER . . . . . . . . . . .120 V w/ external adapter 8 VADC 9 V to 26 V

SIZE . . . . . . . . . . . . . .2”W x 7.2”D x 3.3”H, 5 lbNEMA 4Desk top or wall mount


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Magic 20 Programmable Weighing Indicator - Master KBatching indicator with programmable functions. High processing speed up to 90measurements per second. Numeric and function keys. Weight and data display 6 digits,0.8” high. 3 set point high/low/go, mono-batching, automatic or manual operation. Levelcontrol. AC wave technology for reduced noise and interference. Internal time and datebattery back up. Custom ticket printout. Com port # 1: RS232 output, Com port # 3: 4dry contact relays, no need for external power supply, com port #4: logical inputs.NTEP (pending) Class III/IIL 10,000 div.Part Number Weight Stock Price CMagic 20 Control indicator 5 lb 6691 $ 950.00Magic 20 w/ water proof housing SS IP65 1 lb 6692 1,250.00

Options CCom port #2: RS485 output 1 lb 6693 175.00Desk mount stand 1 lb 6694 95.00Adjustable wall mount w/ SS bracket 1 lb 6695M 45.00

Service Parts COperating manual 1 lb 6696 25.00CPU board Magic 20 1 lb 6697 450.00Display board Magic 20 1 lb 6698 225.00

Membrane switch panel 1 lb 6699 90.00Adaptor AC/DC 1 lb 6700 25.00Power supply board for the SS Magic 20 1 lb 6701 75.00

Magic 20

SPECIFICATIONS

LOAD CELL . . . . . . . .5VAC (6) 350 ohms load cells

ANALOG INPUT . . . . .0.75 µV per division0-10mV full range0-20mV full range0-40mV full range



OUTPUT . . . . . . . . . . .COM1: RS232 outputCOM3: 4 dry contact relays (maximumvoltage 125Vac/150Vdc, maximum current1A, maximum power 60VA ac/30W dc)COM4: 4 logic inputs no need for externalpower supplyOption COM2: RS485 output

KEYS . . . . . . . . . . . . .ZERO, GROSS, NET, TARE, PRINTOUT,CONFIGURATION, CONTROL


DISPLAY . . . . . . . . . . .Bright red LED 0.8” high6 digits (199,999)Alphanumeric guide, 8 characters, 0.24”high

POWER . . . . . . . . . . .115 VAC-10 to +10%, 50/60 Hz or 12Vdc or24Vdc

SIZE . . . . . . . . . . . . . .2.2”W x 8.9”D x 5.2”H, 5 lbNEMA 4SS: 2.6”W x 9”D x 5”H

Indicators





Components

Indicators

IDe 100-Programmable Weight Indicator - Master KHigh processing speed up to 180 measurements a second. Single product batchingindicator that has a DSD(data storage device) which can store 10K weighings for batchingtraceability and management. Bright red 6 digit 0.55” high LED display. Keys are:GROSS/TARE/NET. Alphanumeric guide for easy front panel calibration. AC squarewave technology for reduced noise and interference. Configuration and metrologicalsettings down and up loadable from computer. RS232, RS485, current loop Ethernetexpansion port for optional board. Device Net, Allen Bradley PLC, Modbus RTU/ModiconPLC. Configurable custom printed ticket. Peripheral device management with Com 1,Com 2, LPT ports.NTEP 05-048 Class III/IIIL 10,000 divPart Number Weight Stock Price CIDe 100 Weight Indicator w/ panel mount 5 lb 6702 $ 995.00IDe 100 w/ Water proof housing SS IP65 1 lb 6703 1,260.00

Options CDesk mount housing 1 lb 6704 190.00Dry contact relay board 4 inputs 4 outputs 1 lb 6705 250.00Panel mount frame 1 lb 6706 30.00BCD output board 1 lb 6707 280.00

Service Parts COperating manual 1 lb 6708 25.00CPU board for IDe 1 lb 6709 750.00

Display board for IDe 1 lb 6710 250.00Membrane switch panel 1 lb 6711 125.00Transformer 115 VAC 1 lb 6712 95.00

IDe 100

SPECIFICATIONSLOAD CELL . . . . . . . .7.5VAC (8) 350 ohm load cells




OUTPUT . . . . . . . . . . .Device Net, modemsCOM1: RS232COM2: current loopLPT printerOptionsBCD 4 inputs, 4 outputs: relays rated current6A rated voltage 250VAC

KEYS . . . . . . . . . . . . .ZERO, GROSS/NET, TARE, PRINTOUT,CONFIGURATION, CONTROL



POWER . . . . . . . . . . .115 VAC-10 to +10%, 50/60 Hz

SIZE . . . . . . . . . . . . . .6.7”W x 8.4”D x 5”H, 5 lbNEMA 4Desk top or wall mount


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Indicators

IDe 200-Single Product Batching - Master KSingle product batching indicator that has a DSD(data storage device) which can store10K weighings for batching traceability and management. Bright red 6 digit 0.55” highLED. Numeric keypad function keys, alphanumeric guide for reduced noise andinterference. 8 inputs/24 outputs dry contact relay board. High processing speed up to180 measurements per second. 100 product ID’s with batching set points, pre-actmemory, automatic complement in the event of negative tolerances, time delay’s thresholdwarnings and security code. Custom ticket printout. Modicon PLC+IDe 200 Modbus RTUinterface allows for multi product batching and limitless product ID storage. Peripheraldevice management with COM1, RS232, COM 2: LPT. RS232, RS485. Configurationand metrological settings down and up loadable from computer. Panel mounting 19” 3U-42 TE.NTEP 05-048 Class III/IIIL CertifiedPart Number Weight Stock Price CIDe 200 Panel mount batching control indicator 5 lb 6713 $ 1,750.00

Options CDesk mount housing 1 lb 6714 190.00Panel mount frame 1 lb 6715 30.00RS485 internal mount board 1 lb 6716 175.00

Service Parts COperating manual 1 lb 6717 25.00CPU board for IDe 1 lb 6718 750.00

Display board for IDe 1 lb 6719 250.00Membrane switch panel 1 lb 6720 125.00Transformer 115 VAC 1 lb 6721 95.00Dry contact relay board 8 input/24 output 1 lb 6722 650.00

SPECIFICATIONSLOAD CELL . . . . . . . .7.5VAC (8) 350 ohm load cells




OUTPUT . . . . . . . . . . .8 inputs/24 outputs125 VAC, 1A, 60VA150 VDC, 1A, 30W

KEYS . . . . . . . . . . . . .ZERO/GROSS, NET, TARE, PRINTOUT,CONFIGURATION, CONTROL, lb, kg



POWER . . . . . . . . . . .115 VAC-10 to +10%, 50/60 Hz

SIZE . . . . . . . . . . . . . .6.7”W x 8.4”D x 5”H, 5 lbNEMA 4Desk top or wall mount

IDe 200


Indicators




Components

IDe 400 Truck Weighing Indicator - Master KExcellent precision and stability of measurement. Compatible with all strain gaugeweighing load cells. Suitable for all applications as weighbridges or platform scales.Graphic display with backlight. 6 digit, 15mm high. 51 keys, 28 alphanumerical, 10numerical, 13 function. 4 weighing modes: Gross/Tare/Net weighing with tare entry by theoperator, programmable tare in a file, semi automatic tare function. Fully immunizedagainst computer viruses. Data storage device (DSD) allows operations’ traceability andstoring up to 28,000 records.NTEP 05-048, III/IIIL, 10,000 div (Truck Scale application pending)Part Number Weight Stock Price CIDe 400 Truck scale control indicator 6 lb 7153 $ 1,050.00

Options C4I/4O dry contact relays for lights & barriers 1 lb 7154 250.00DSD memory extension for 1 million transaction 1 lb 7155 150.00RS485 international mount board 1 lb 7156 175.00

Service Parts B5Additional operating manual 1 lb 7157 25.00IDe CPU board 1 lb 7158 750.00IDe display board 1 lb 7159 250.00Membrane switch panel 1 lb 7160 150.00115 VAC transformer 1 lb 7161 95.00

SPECIFICATIONSLOAD CELL . . . . . . . .12 VDC

(8) 350 ohm load cells


CONVERSION . . . . . .10 to 180 update rate1:10,000 displayed (NTEP)1:100,000 internal


OUTPUT . . . . . . . . . . .COM 1: RS232/485 (short distance)COM 2: current loopLPT printerUSB (for file transfer)

KEYS . . . . . . . . . . . . .ZERO, TARE, GROSS/NET. KEY TARE

DISPLAY . . . . . . . . . . .Graphic display with backlight, 15mm high6 digits

ANNUNCIATORS . . . .F1, F2,F3, F4

POWER . . . . . . . . . . .115 VAC -10 to + 10%, 50/60Hz,

SIZE . . . . . . . . . . . . . .13.4”L x 8.7”W x 4.1”H, 6.3 lbDeck or panel mounting

IDe 400Truck Weighing Indicator


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Indicators



Components

CD11 Digital weight indicator - OhausThe CD11 Indicator delivers NTEP approved performance in lb, oz, kg or g. Wall, benchor tower mounted. Drives up to four, 350 ohm load cells. Resolution to 1:20,000. Partscounting mode, standard RS232 bi-directional interface, auto-off timer, adjustableaveraging and stability levels, retain zero data, auto zero tracking. Simple four buttonoperation for ON/ZERO/OFF, PRINT UNITS, G/N/T/MENU, TARE. 1” high LCD backlightdisplay. Annunciators for Stable, Center of Zero, Pcs, Gross, Net, Tare. AC adapteroperation (120 VAC adapter is included) or (6) alkaline “C” batteries (batteries notincluded). 250 hours with one 350 ohm load cell. Optional wall mount bracket andoptional tower mount. 5 year warranty.Canadian AM-5340NTEP 99-100 II/IIIL 5,000 divPart Number Weight Stock Price CCD11 Indicator 5 lb 4216 $ 426.00

Options C80250686 Base mount bracket for CD11 2 lb 4271M 90.2071135127 Column for CD11/31/33 11 lb 4257M 102.00

Service Parts C80500435 AC adapter 120 VAC 2 lb 403M 55.70

CD-11

SPECIFICATIONS

LOAD CELL . . . . . . . .5 VDC, 60ma(4)350 or (8)700 ohm load cellsRemote sensing for long cable runs

ANALOG INPUT . . . . .1.33 µV per div (NTEP)0.33 µV per div (Industrial)

CONVERSION . . . . . .Stabilization time is 3 sec5,000 display div (NTEP)20,000 display div (Industrial)200,000 internal counts

OUTPUT . . . . . . . . . . .RS232 bidirectionalBaud 1200, 2400, 4800, 9600, O/E/N parity,7/8 data, 1/2 stop

DISPLAY . . . . . . . . . . .LCD liquid crystal display 1” high4 1/2 digit 19,999 displayDecimal point selectableDisplay div 1,2,5,10


POWER . . . . . . . . . . .120 VAC 50/60 Hz, 8 wattsInternal battery holder will take (6) “C”batteries (not included)

SIZE . . . . . . . . . . . . . .CD11: 7.9”W x 6.8”D x 3”H, 5 lbDesk top mount, Cycoloy plastic enclosureCW11: 9.75”W x 9”D x 6”H, 7 lbBracket for wall or desk, Stainless steel





Components

Indicators

CD31 Digital weight indicators - OhausThe CD31is the shape of things to come. They offer functions like basic weighing, partscounting, checkweighing, animal weighing and percent. They will weigh in lbs, kg and g.Standard RS232 bi-directional interface. Time and Date output. Net/Gross function, sleepmode, adjustable averaging and stability levels, retain zero data, auto zero tracking. Keysfor ENTER, PRINT, TARE, >0<, MODE, SETUP, GTN, UNITS. CD-33 has keypad for 0-9.Optional wall mount bracket and optional tower mount. Includes 120 VAC power adapter.5 year warranty.Canadian AM-5339NTEP 99-071 III/IIIL 10,000 divPart Number Weight Stock Price CCD31 Indicator 5 lb 4217M $ 585.00

Options C80250634 Base mount bracket for CD31/33 2 lb 4256M 99.4071135127 Column for CD11/31/33 11 lb 4257M 102.00

Service Parts C80500435 AC adapter 120 VAC 2 lb 403M 55.70

CD-31

SPECIFICATIONS

LOAD CELL . . . . . . . .5 VDC, 60ma(4)350 or (8)700 ohm load cells4 wire, no remote sense


CONVERSION . . . . . .Stabilization time 1 to 4 seconds10,000 display div (NTEP)50,000 display div (Industrial)400,000 internal counts

OUTPUT . . . . . . . . . . .RS232 bidirectionalBaud 300, 600, 1200, 2400, 4800, 9600,O/E/N/1/0 parity, 7/8 data, 1/2 stop

DISPLAY . . . . . . . . . . .LCD liquid crystal display 0.6” high2 line: Weight and prompt message5 1/2 digit 199,999 displayDecimal point selectableDisplay div 1,2,5,10,20,50


POWER . . . . . . . . . . .AC adapter 120 VAC 50/60 Hz, 8 watts

SIZE . . . . . . . . . . . . . .10”W x 7.75”D x 3.12”H, 5 lbDesk top mount, Cycoloy plastic enclosure


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

SPECIFICATIONS

LOAD CELL . . . . . . . .5 VDC, 60ma(4)350 or (8)700 ohm load cellsRemote sensing for long cable runs



OUTPUT . . . . . . . . . . .RS232 bidirectionalBaud 1200, 2400, 4800, 9600, O/E/N parity,7/8 data, 1/2 stop

DISPLAY . . . . . . . . . . .LCD liquid crystal display 1” high4 1/2 digit 19,999 displayDecimal point selectableDisplay div 1,2,5,10


POWER . . . . . . . . . . .120 VAC 50/60 Hz, 8 wattsInternal battery holder will take (6) “C”batteries (not included)

SIZE . . . . . . . . . . . . . .9.75”W x 9”D x 6”H, 9 lbBracket for wall or desk, Stainless steelIP-65

CW11 Digital weight indicator - OhausThe CW11 Indicator has a stainless steel washdown housing that is NEMA 4X and IP-65.Delivers NTEP approved performance in lb, kg, g or oz. Wall or bench mounting bracket.Backlit LCD display. Drives up to four, 350 ohm load cells. Resolution to 1:20,000. Partscounting mode, animal/dynamic weighing, standard RS232 bi-directional interface, auto offtimer, adjustable averaging and stability levels, retain zero data, auto zero tracking.Simple four button operation for ON/OFF, PRINT/UNITS, ZERO/MENU. G/N/T/TARE.Annunciators for Stable, Center of Zero, Pcs, Gross, Net, Tare. 120 AC line cord or (6)alkaline “C” batteries (batteries not included). 100 hours with one 350 ohm load cell. 5year warranty.Canadian AM-5340NTEP 99-100 II/IIIL 5,000 divPart Number Weight Stock Price CCW11 Stainless steel indicator 9 lb 1299 $ 662.00

CW-11

Indicators





Components

Indicators

T31P & T32XW 3000 Defender Indicators - OhausT31P: ABS plastic housing with internal rib reinforcements. 6 digit, 7 segment backlitLCD. Raised tactical keys. Built in bidirectional RS232C with manual, continuous andinterval printing. Hardware configuration lockout switch. Software included for partscounting mode with selectable sample sizes. Selectable span calibration points.Averaging level, auto zero tracking. Battery saving off, Geo Code geographical gravitycalibration adjustment. 9 VDC Internal lead acid rechargeable battery and AC adapter.

T32XW: Stainless steel. 6 digit, 7 segment backlit LCD. Raised tactical keys. Built inbidirectional RS232 with manual, continuous and interval printing. Hardware configurationlockout switch. Software included for parts counting mode with selectable sample sizes.Selectable span calibration points. Averaging level, auto zero tracking. Battery saving off,Geo Code geographical gravity calibration adjustment. 120 VAC, 50-60 Hz. Internal ACpower. IP66/NEMA4X.

Part Number Weight Stock Price CT31P ABS plastic indicator 4 lb 2471 $ 305.00T32XW SS enclosure indicator 7 lb 2472 500.00

Service Parts C80500435 120 VAC adapter 2 lb 403M 55.70

NEWNEW

T32XWIndicator

T31PIndicator

SPECIFICATIONSLOAD CELL . . . . . . . .5 VDC, 60 ma

(4)350 ohm load cellsno remote sense


CONVERSION . . . . . .Within 2 seconds

ACCURACY . . . . . . . .0.01% full accuracy

OUTPUT . . . . . . . . . . .RS232 serial bidirectionalfor printing or to PC

POWER . . . . . . . . . . .T31P Internal battery, rechargeable,lead acid and AC adapter 120 VAC to9 VDC 0.5A, 100 hour battery operation

T31XW, lead acid and internal power supply,120 VAC 60 Hz, 8 watts. 100 hour batteryoperation

KEYS . . . . . . . . . . . . .ON/ZERO/OFF,PRINT/UNITS/FUNCTION/MODE,TARE/MENU

ANNUNCIATORS . . . .lb, oz, lb/oz, kg, g

DISPLAY . . . . . . . . . . .LCD display, 6 digit 1” high

SIZE . . . . . . . . . . . . . .T31P: 8.2” x 2.8” x 6.5”T31XW: 8.3” x 2.8” x 5.8”


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

LOAD CELL . . . . . . . .5 VDC, 60ma(4)350 or (8) 700 ohm load cells



OUTPUT . . . . . . . . . . .RS232 bidirectionalBaud 300, 600, 1200, 2400, 4800, 9600,19200, O/E/N parity, 7/8 data, 1/2 stopRS485/422 *AC/DC relay output *Internal rechargeable battery ** Optional

KEYS . . . . . . . . . . . . .LIBRARY, NEXT, TARGET, ON/OFF/ZERO,PRINT, MENU, G/N/Y, TARE, 0-9 keypad

ANNUNCIATORS . . . .Over/Under/Accept bar graph, %, kg, lb, g,oz, B/G, Net, Tare, PT

DISPLAY . . . . . . . . . . .LED display 0.8” high6 digit 999,999 displayDecimal point selectableDisplay div 1,2,5,10


POWER . . . . . . . . . . .120 VAC (100 to 240VAC) 50/60 Hz, 8 watts

SIZE . . . . . . . . . . . . . .9”W x 3”D x 9”H, 11 lbDesk top or wall mount304Stainless steelNEMA 4X, IP66

SPECIFICATIONS

CKW55 Checkweighing indicator - OhausAll stainless steel construction. Speed, durability and cleanliness. 1/7,500 maximumresolution. Weighing in kg, g, lb, oz, lb:oz, %. Adjustable brightness LED display, 3 color,24 segment checkweighing bar graph. Set targets by Range, Variance by Weight orPercent. Accumulation with number of weighments, average and standard deviation.100-240 VACPart Number Weight Stock Price CCKW55 Checkweighing Indicator 11 lb 5352 $ 965.00

Options C71167966 Rechargeable Battery 1 lb 5346M 302.0071167965 RS485/422 1 lb 5347M 183.0071167967 AC Relay 24-240 VAC, 2A 1 lb 5348M 323.00

71173377 DC Relay 5-60 VDC, 2A 1 lb 5349M 332.0071173378 Foot Tare Switch 2 lb 5350M 116.00

Indicators

CKW55





Components

Indicators

T71XW & T71P 7000 Defender Indicators - OhausT71P: ABS plastic housing with internal rib reinforcements, reversible rear cover, backlitLCD weight display, checkweighing indication (green, yellow, red), membrane keypad withraised tactile keys. Built in bi-directional RS232 with manual/continuous/interval printing.External tare input. Hardware configuration lock-out switch. Internal universal powersupply with line cord and battery power using (6) “C” cell batteries100-240 VAC, 50-60 Hz.

T71XW: Stainless steel water resistant NEMA 4X/IP66 housing. Integral faceplatessupports for easy servicing. Backlit LCD weight display. Checkweighing indication(green, yellow, red), membrane keypad with raised tactile keys. Built in bi-directionalRS232 with manual/continuous/interval printing. External tare input. Hardwareconfiguration lock-out switch. Internal universal power supply with hardwired cord.100-240 VAC, 50-60 Hz

Part Number Weight Stock Price CT71P ABS plastic indicator 5 lb 1694 $ 644.00T71XW SS enclosure indicator 10 lb 1695 965.00

T71XWIndicator

T71PIndicator

NEWNEW

SPECIFICATIONS

LOAD CELL . . . . . . . .5 VDC, 60 ma(8)350 ohm load cellsno remote sense




OUTPUT . . . . . . . . . . .RS232 serial bidirectionalfor printing or to PC

POWER . . . . . . . . . . .T71P Internal universal power supply, linecord. 100-240 VAC/50-60 Hz. (6) “C” cellbatteries (not included). 80 hour batteryoperation

T71XW Internal universal power supply,hardwire cord. 120-240 VAC/50-60 Hz.100 hour battery operation

KEYS . . . . . . . . . . . . .ON/ZERO/OFF,PRINT/UNITS/FUNCTION/MODE,TARE/MENU, LIBRARY/EDIT

ANNUNCIATORS . . . .kg, g, lb, oz, lb:oz (decimal), tonnes and userdefinable custom unit

DISPLAY . . . . . . . . . . .6 digit, 7 segment, Backlit dual LCD, red,yellow, green LED

SIZE . . . . . . . . . . . . . .T71P: 10.2” x 2.7” x 8.8”T71XW: 10.3” x 3” x 8.7”


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components


(8)350 ohm load cells




OUTPUT . . . . . . . . . . .RS232 bidirectionalRS422*, RS485** Optional

POWER . . . . . . . . . . .T51P: Internal battery, line cord100-240 VAC 60 Hz, 80 hour life

T51XW: Internal battery, hardwire cord100-240 VAC 60Hz

KEYS . . . . . . . . . . . . .ON/ZERO/OFF, PRINT/UNITS,FUNCTION/MODE, TARE/MENU

ANNUNCIATORS . . . .lb, oz, lb/oz, kg, g, tonnes, custom

DISPLAY . . . . . . . . . . .LCD display, 6 digit 1” high

SIZE . . . . . . . . . . . . . .T51P: 13” x 9.5” x 7”T51XW: 13” x 9.5” x 7”

NEWNEW

T51PIndicator

T51XWIndicator

Defender 5000 Indicators - OhausT51P: ABS plastic housing with reversible rear cover for either wall, column, scale front ortable top mounting. High visibility 6 digit, 7 segment LCD display. 3 color LEDcheckweigh indicator. Fast display stable weight within 2 seconds. 4 key membraneraised tactile keys. One key, multiple mode selection. Internal slot for capacity label.Included table/wall mount bracket. Built in RS232 bi-directional interface and built inexternal input, optional RS422/485, optional second RS232 and optional AC or DC relay.Simple plug in battery installation. (6) ‘C’ Alkaline batteries or optional NiMH battery.Universal switching power supply automatically adapts to different voltages from 100-240VAC.

T51XW: Stainless steel. Bright white 6 digit, 7 segment LED backlight. 3 color LEDcheckweigh indicator. Fast display stable weight within 2 seconds. 4 key membraneraised tactile keys. One key, multiple mode selection. Internal slot for capacity label.Included table/wall mount bracket. Built in RS232 bi-directional interface and built inexternal input, optional RS422/485, optional second RS232 and optional AC or DC relay.Optional NiMH battery. IP66/NEMA4X enclosure. Universal switching power supplyautomatically adapts to different voltages from 100-240 VAC.

Part Number Weight Stock Price C5T51XW indicator 10 lb 7390 $ 766.00T51P indicator 5 lb 7391 493.00

Options C580500720 AC relay kit 1 lb 7392M 231.0080500727 DC relay kit 1 lb 7393M 198.0080500731 RS485/422 Interface kit 1 lb 7394M 62.30

80500733 RS232 Interface kit 1 lb 7395M 45.1080500729 Rechargeable battery kit 4 lb 7396M 147.00

80500722 Base mount kit 1 lb 7397M 34.5080500723 35cm Painted column kit 1 lb 7398M 47.8080500724 68cm Painted column kit 1 lb 7399M 54.40

80500725 35cm SS Column kit 1 lb 7400M 110.0080500726 68cm SS Column kit 1 lb 7401M 143.00

Indicators





Components

Indicators

7400+ Indicator


(10)350 or (20)700 ohm load cellsRemote sense for long cables


CONVERSION . . . . . .60 updates/second10,000 division display NTEP40,000 division display, Industrial16,777,216 division internal


OUTPUT . . . . . . . . . . .(2) Serial interfaces Choice of RS232,RS485, RS422, 20ma serial loopTime & date w/battery backup

KEYS . . . . . . . . . . . . .ZERO, GROSS/NET, TARE, UNITS, PRINT


DISPLAY . . . . . . . . . . .Bright green LED 0.56” high5 digits (199,999)

POWER . . . . . . . . . . .120 VAC +/-10%, 60Hz, 5 watts

SIZE . . . . . . . . . . . . . .12”W x 4”D x 7”H, 10 lb304 Stainless steel enclosureDesk top or wall mount

7400+ Weight Indicator - PennsylvaniaWeight only. Stainless steel washdown enclosure w/ U bracket. Process and bulkapplications. 10 point linearization. Terminal strip load cell connect with sealed fittings.Push button tare, 5 button front panel. 16 bit Microprocessor with flash memory. 60updates per second. (2) data interfaces from a list of (4) including RS232, RS422,RS485, 20 ma current loop. 120 VAC 50/560 Hz, (4) year warranty.NTEP 97-009, III 10,000 divCanadian AM-5647 10,000 divPart Number Weight Stock Price C7400+ Indicator 10 lb 6768 $ 595.00

Options CAO Analog Output 1 lb 6769M 267.00Solid State Relays (4) 1 lb 6770M 267.00Dry Contact Relays (4) 1 lb 6771M 267.00220 Volt operation 1 lb 6772M No charge

Factory Calibration to Pennsylvania base 6773M No ChargeSAE Special features including software or hardware 6774M Call

Service PartsKeypad for 7400+ 1 lb 6975 65.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Indicators

SPECIFICATIONS






KEYS . . . . . . . . . . . . .ZERO, SAMPLE SET, UNITS, PRINT


DISPLAY . . . . . . . . . . .Bright green LED 0.56” high6 digits (199,999)Decimal location selectableDiv 1, 2, 5


SIZE . . . . . . . . . . . . . .12”W x 4”D x 7”H, 10 lb304 Stainless steel enclosureNEMA 4Desk top or wall mount

7500+ Indicator

7500+ Weight Indicator - PennsylvaniaWeighing and counting in a standard indicator. Compact size, NEMA 4 stainless steelenclosure. U bracket for desk or wall mounting. Automatic Sample Update for superbcounting results. Very fast 60 updates per second. One button counting. (2) datainterfaces from a list of (4) including RS232, RS422, RS485, 20 ma current loop. 120VAC 50/560 Hz, (4) year warranty.NTEP 97-009, III 10,000 divCanadian AM-5647 10,000 divPart Number Weight Stock Price C7500+ Indicator 10 lb 6578 $ 575.00

Options C57680 Second scale base input, factory installed 1 lb 6580M 208.00

Service Parts C48445 load cell connector kit 1 lb 6581M 20.00Keypad for 7500+ 1 lb 6976 65.00


Indicators




Components

SPECIFICATIONS

LOAD CELL . . . . . . . .5 VDC, 120 ma(8)350 or (10)1,000 ohm load cells

ANALOG INPUT . . . . .0.1 µV Graduation

CONVERSION . . . . . .30 updates/second


OUTPUT . . . . . . . . . . .(2) Serial interfaces Choice of RS232C orRS485, 20ma current loop

KEYS . . . . . . . . . . . . .ZERO, GROSS/NET, TARE, SET, TARERECALL, START/STOP, BASE, UNITS, I.D.,CHECK, PRINT, CLEAR, ENTER.


DISPLAY . . . . . . . . . . .Red high intensity LED 0.56” high6 digits (199,999)


SIZE . . . . . . . . . . . . . .10”W x 4”D x 6.5”H, 10 lb304 Stainless steel enclosureNEMA 4Desk top or wall mount

7600E IndicatorRear view

7600E Indicator

7600E Digital Weigh and Batch Indicator - PennsylvaniaStainless steel washdown enclosure with U Bracket mount for wall or shelf. Pre-programmed Batch and Truck Scale options for easy set up. 0.6” high red LED. 10 pointlinearization. Smart Serial programmable Serial Data strings. Direct Keyboard entry ofSetpoint values and Tare Weights. 6 button front panel. 24 bit delta sigma; 16 mv SignalInput. 30 updates per second. (2) data interfaces, RS232C or RS485, 20 ma currentloop. 117 VAC 50/560 Hz, (2) year warranty.NTEP 97-009 III, 10,000 divCanadian AM-5647 10,000 divPart Number Weight Stock Price C7600E Indicator 10 lb 6775 $ 645.007600E Indicator AC w/ battery 10 lb 6422 870.007600E 12VDC only, no battery 10 lb 6436 645.00

Options CAO Analog Output 1 lb 6769M 267.00Solid State Relays (4) 1 lb 6770M 267.00Dry Contact Relays (4) 1 lb 6771M 267.00220 Volt operation 1 lb 6772M No charge

Factory Calibration to Pennsylvania base 6773M No chargeSAE Special features including software or hardware 6774M CallKeypad for 7600E 1 lb 6978 92.50Ethernet module 1 lb 6887 267.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Indicators

7600+ Indicator

SPECIFICATIONS






KEYS . . . . . . . . . . . . .ZERO, SAMPLE SET, GROSS/NET, TARE,PIECE WEIGHT, KEYBOARD TARE, BASE,UNITS, PRINT, CLEAR, CHECK, ON/OFF,ENT.


DISPLAY . . . . . . . . . . .Bright green LED 0.56” high6 digits (199,999)Decimal location selectableDiv 1, 2, 5


SIZE . . . . . . . . . . . . . .12”W x 4”D x 7”H, 10 lb304 Stainless steel enclosureNEMA 4Desk top or wall mount

7600+ Weight Indicator - PennsylvaniaWeighing and counting in a standard indicator. Compact size, NEMA 4 stainless steelenclosure. U bracket for desk or wall mounting. Automatic Sample Update for superbcounting results. Very fast 60 updates per second. One button counting. 0-9 keypad forentry of Piece weight, Tare weight and 6 digit ID. (2) data interfaces from a list of (4)including RS232, RS422, RS485, 20 ma current loop. Peak Hold feature to remember thelast highest weight displayed. Peak can be reset with ZERO key. 120 VAC 50/560 Hz,(4) year warranty.NTEP 97-009, III 10,000 divCanadian AM-5647 10,000 divPart Number Weight Stock Price C7600+ Indicator 10 lb 6579 $ 645.00

Options C57680 Second scale base input, factory installed 1 lb 6580M 208.00Dual or triple range for 7600+ 1 lb 5717 No charge

Service Parts C48445 load cell connector kit 1 lb 6581M 20.00Keypad for 7600+ 1 lb 6977 92.50





Components

Indicators

SPECIFICATIONS

TI-500SL

LOAD CELL . . . . . . . .10 VDC, 120 ma5 VDC, 240 ma(4)350 or (8)700 ohm load cells

ANALOG INPUT . . . . .0.4 µV per div, 1.0 µV per div NTEP

CONVERSION . . . . . .10 updates per sec5,000 display div NTEP50,000 div, industrial



KEYS . . . . . . . . . . . . .UNITS, ZERO/OFF, NET/GROSS, TARE,ON/PRINT

ANNUNCIATORS . . . .Zero, Net, Gross, ,Stable, lb, kg,

DISPLAY . . . . . . . . . . .LCD, 6 digit 8” highDecimal point selectableDisplay div 1,2,5,10,20,50,100,200

POWER . . . . . . . . . . .Internal rechargeable lead acidbatteries w/adapter120 VAC 50/60 Hz, to 12 VDC, 650 ma

SIZE . . . . . . . . . . . . . .9”W x 2.9”D x 5.5”H, 10 lbNEMA 4X Type 304 Stainless steelDesk top or wall mount

TI-500SL Weight Indicator - Transcell Technology, IncWeighing indicator with easy to read 0.8” high LCD display. Full duplex RS232 serial port.Enclosure and swivel stand NEMA 4X stainless steel. Internal rechargeable batteryw/120VAC wall adapter. 20 hour battery life.NTEP 94-080 III 5,000 divPart Number Weight Stock Price C5TI-500SL battery indicator with 0.75” LCD display 10 lb 1560 $ 395.00

CTI500BWL Indicator (6) “C” cell powered 8 lb 2745 325.00TI500BWL Indicator Nicad battery w/LCD display 10 lb 3668M 350.00

w/Animal weighing mode

Service Parts DAC adapter 120 VAC to 12 VDC 0.8A for TI500BWL 1 lb 2812M 35.75

TI-500BWL

NEWNEW


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Indicators



CONVERSION . . . . . .30 updates per sec5,000 display div NTEP50,000 div, industrial260,000 div internal


DISPLAY . . . . . . . . . . .Green LED, 6 digit 0.6” highDecimal point selectableDisplay div 1,2,5,10,20,50,100,200



SIZE . . . . . . . . . . . . . .9”W x 2.9”D x 5.5”H, 8 lbNEMA 4 Stainless Steel enclosureDesk top or wall mount

SPECIFICATIONS

TI-600ESS

TI-600E Weight Indicator - Transcell Technology, IncWeighing indicator with keyboard for tare entry. Tare stored in non volatile memory. Easyto read bright LED display. Front panel keys for lb/kg, ZERO, NET/.GROSS, TARE,PRINT, DISP TARE, 0-9. Full duplex RS232 serial port. Gross/Net/Tare print ticket modewith 6 digit ID number and date. NEMA 4 Stainless Steel enclosure and swivel stand.120 VAC adapter is included.NTEP 94-08082 III 5,000 divPart Number Weight Stock Price DTI-600ESS Indicator w/green LED display 8 lb 3270 $ 455.00

Service Parts DAC adapter 120 VAC to 12 VDC 1 lb 2843M 27.75AC adapter 100-240VAC to 12VDC 1 lb 2562M 35.75

Typically used for 220VAC





Components

Indicators

SPECIFICATIONS

TI-1500E Weight Indicator - Transcell Technology, IncWeighing indicator with easy to read bright LED display. Front panel keys for UNITS,ZERO, NET/.GROSS, TARE, PRINT. Full duplex RS232 serial port. SimplexRS232/20ma current loop serial port. Gross/Net/Tare print ticket mode with 6 digit IDnumber, time and date. Custom units. Optional piece count mode available to customersoutside the U.S. Enclosure and swivel stand available in both NEMA 12 ABS plastic orNEMA 4X stainless steel. Internal power supply eliminates the power adapter. 120VAC.NTEP 99-017 III 10,000 divPart Number Weight Stock Price DTI-1500 Indicator w/green LED display 8 lb 3667 $ 471.00TI-1520 Indicator Stainless Steel w/green LED display 8 lb 4049 511.00

Service Parts DKeypad for TI-1500 1 lb 6675 33.50




OUTPUT . . . . . . . . . . .Full duplex RS232Simplex RS232, 20ma current loop serialBaud 1200, 2400, 4800, 9600, O, E, N

DISPLAY . . . . . . . . . . .Green LED, 6 digit 1” highDecimal point selectableDisplay div 1,2,5,10,20,50,100,200


POWER . . . . . . . . . . .120 VAC 50/60 Hz, 0.5 watt

SIZE . . . . . . . . . . . . . .10”W x 4”D x 8”H, 8 lbNEMA 12 ABS plastic enclosure orNEMA 4X Stainless steelDesk top or wall mount

TI-1500

TI-1520


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Indicators



Components




OUTPUT . . . . . . . . . . .Full duplex RS232Simplex RS232, 20ma current loop serialBaud 1200, 2400, 4800, 9600, O, E, N

DISPLAY . . . . . . . . . . .Green LED, 6 digit 1” highDecimal point selectableDisplay div 1,2,5,10,20,50,100,200


POWER . . . . . . . . . . .120 VAC 50/60 Hz, 0.5 watt

SIZE . . . . . . . . . . . . . .10”W x 4”D x 8”H, 7 lbNEMA 12 ABS plastic enclosure orNEMA 4X Stainless steelDesk top or wall mount

SPECIFICATIONS

TI-1600

TI-1620

TI-1600 Weight Indicator - Transcell Technology, IncWeighing indicator with easy to read bright LED display. Front panel keys for UNITS,ZERO, NET/.GROSS, TARE, PRINT, 0-9, Sample, APW, CL, Dec Pt. Full duplex RS232serial port. Simplex RS232/20ma current loop serial port. Gross/Net/Tare print ticketmode with 6 digit ID number, time and date. Custom units. Optional piece count modeavailable to customers outside the U.S. Enclosure and swivel stand available in bothNEMA 12 ABS plastic or NEMA 4X stainless steel. Internal power supply eliminates thepower adapter. 120 VAC.NTEP 99-017 III 10,000 divPart Number Weight Stock Price DTI-1600 Indicator w/green LED display 7 lb 4181 $ 495.00TI-1620E Indicator Stainless Steel w/green LED display 8 lb 4182 595.00





Components

Indicators

MW2001 MicroWeigh Digital Indicator - WeighTechEngineered to be the best in its class. Designed to outperform and outlast otherindicators. 5 Touch sensitive keypad responds to human touch, not knives or other sharpinstruments. Dust resistant under IP6 makes this the only indicator in this class. Keyelectronic components permanently sealed in ABS plastic enclosure. Bright, easy to read,16 character backlit alphanumeric LED display. Front access panel. Standard weighing,check weighing, bench or floor scales, batch weighing. Can be retrofitted to existingscales. No double boxing. Electrical potted parts for safety when panel is exposed ortaken off. Meets industry standards of IP69K, NEMA 4, NEMA 6, IPX7, IPX8.NTEP 01-082 Class III/IIIL 10,000 divPart Number Weight Stock Price CMW2001-HW 6 lb 2863 $ 930.00MW2001 Indicator battery operated 7 lb 2864 965.00

Options CBattery for MW2001 indicator 1 lb 2865 67.00

NEWNEW

LOAD CELL . . . . . . . .4.5 VDC +/- 5%, 120 ma(8)350 ohm load cellsno remote sense

ANALOG INPUT . . . . .0.18 µV/ div

CONVERSION . . . . . .7.5/15/30 times/sec display update10,000 display divisions


OUTPUT . . . . . . . . . . .RS232 Blue Tooth, RS4859600 Baud, 8 bits, no parity,1 stop bit

KEYS. . . . . . . . . . . . . .UNITS/CANCEL, MENU/HELP,PRINT/ENTER, TARE, ZERO/ON

ANNUNCIATORS . . . .Gross, Net, Motion, Zero, lb, kg, g, oz, lb/oz

DISPLAY . . . . . . . . . . .LCD w/ adjustable contrast and backlight, 16character alphanumeric

POWER . . . . . . . . . . .120 VAC, 60Hz, 12 Watts

SIZE . . . . . . . . . . . . . .8.25”W x 3.5”D x 5.25”H, 7 lbABS plastic enclosure,NEMA 4, NEMA 6, IP69K

SPECIFICATIONS

MW2001Digital Indicator


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Indicators



Components

Model ITG3030Service parts only.Part Number Weight Stock Price CService PartsC2 Second RS232C/20ma output 1 lb 1790 $ 145.00

Model AN-5316Service parts only.Part Number Weight Stock Price CService PartsAN-5316-MOD-10 EPROM 20 conversions/sec 1 lb 791 $ 65.00





Components

T Belting

Scale pit T-Grip beltingT-Grip belting will stop unwanted product from getting into a truck scale pit with its uniquedesign. The “T” section will slip into the gap between the scale platform and the pit wall.The gap must be 1/2” or larger to avoid any scale binding. The exclusive grips on thevertical section of the “T” hold on to the pit wall and platform to help prevent the beltingfrom being pulled out with the normal flow of traffic. The T-Grip belting is installed aroundthe perimeter of the scale platform. To allow ventilation, a gap of 8 “ to 12” can be left onthe sides where there is little chance of product spillage. ”T” belting is 5-3/4” wide and1/4” thick at top. The vertical is 2-1/4” high and 7/16” thick.Part Number Weight Stock Price CT-Grip belting, 10 ft 20 lb 346 $ 79.00T-Grip belting, 70 ft 140 lb 347 553.00T-Grip belting, 80 ft 160 lb 358 632.00T-Grip belting, special order per foot, 2 lb/ft 359 7.90increments of 10 ft, max 150 ft

Call for delivery. Normally in stock to 1 week delivery.

Scale pit T beltingT-Belting is used on the sides of the scale platform away from the flow of traffic. The endsof the scale platform should use the T-Grip described above. ”T” belting is 4-1/2” wideand 1/4” thick at top. The vertical is 1-1/2” high and 1/4” thick.Part Number Weight Stock Price CT-Belting, 10 ft 8 lb 2844 $ 60.90T-Belting, 70 ft 53 lb 2845 426.00T-Belting, special order per foot, 0.8 lb/ft 2846 6.10increments of 10 ft, max 150 ftCall for delivery. Normally in stock to 1 week delivery.

T-Grip

T-Belt


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

ConnectorsFor Digital Weight Indicators and printersPart Number Used with Mates with Weight Stock Price C57-30500 8130 desk mount, A&D 57-40500 1 lb 633 $ 36.0057-30360 Electroscale DR525 57-40360 1 lb 630 33.00

DE-09P Ohaus PBI serial DE-09S 1 lb 581 16.80DE-09S Ohaus PBI serial DE-09P 1 lb 582 16.80

DA-15P UMC 2000 DA-15S 1 lb 881 18.00DA-15S UMC 2000 DA-15P 1 lb 882 18.00

DB-25P RS232-C, 550/551 DB-25S 1 lb 631M 20.00DB-25S RS232-C DB-25P 1 lb 1052 20.00

DC-37P UMC2000, AO543 DC-37S 1 lb 634M 23.00DC-37S WI 110 DC-37P 1 lb 1053 23.00

DD-50P AN-5316 MD50F 1 lb 464 26.00

Cable

57-30360

57-30500

DE-09P

DA-15P

DB-25P

DC-37P

DD-50P

DE-09S

DA-15S

DB-25S

DC-37S





Components

Cable

MS3106A-14S-5P MS3101A-14S-5S MS3106A-14S-5S



MS3102A-14S-5P

ConnectorsUsed to connect load cells and indicators. Electroscale uses the MS3106A- 14S-6P andMS3101A-14S-6S connector. Make sure you have selected either pins (plugs) or sockets(receptacles). The connectors without flanges have strain relief cable clamps.Part Number Contacts Weight Stock Price CMS3106A-14S-5P 5 pins w/collar 1 lb 409 $ 14.90MS3101A-14S-5S 5 sockets 1 lb 410 19.50MS3106A-14S-5S 5 sockets w/collar 1 lb 1069 17.70

MS3106A-14S-6P 6 pins w/collar 1 lb 254 15.10MS3101A-14S-6S 6 sockets 1 lb 255 20.60MS3106A-14S-6S 6 sockets w/collar 1 lb 1070M 15.30

MS3106A-16S-1P 7 pins w/collar 1 lb 256 18.60MS3101A-16S-1S 7 sockets 1 lb 257 22.50MS3106A-16S-1S 7 sockets w/collar 1 lb 1006 19.90

With mounting flangeMS3102A-14S-5P 5 pins 1 lb 1708 12.50MS3102A-14S-5S 5 sockets 1 lb 3585 13.00MS3102A-14S-6S 6 sockets 1 lb 1068 13.00MS3102A-16S-1S 7 sockets 1 lb 1011 14.50

MS3102A-14S-6S MS3102A-16S-1S

MS3102A-134S-5S


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Cable

Totalcomp Splice kitView thru quick connect splicing kit is made of durable high impact plastic. NEMA 4 with(2)strain relief connectors. End caps are secured with stainless steel screws and sealedwith “O” ring gaskets. Removable end caps allow easy access to the internal circuit boardfor connecting (6) wires with (2)screw terminal blocks (6)positions each. Shields areconnected to (2)separate ground screws. If you prefer solder connections, the wires canbe terminated to solder terminals. 6-5/8” length and 2-3/4” dia.Part Number Weight Stock Price CTSK cable splicing kit 1 lb 863 $ 151.00

72-N1

KVM

TSK

PVC Splice BoxLow cost/high performance high impact PVC(non-metallic). Weatherproof gasket coverfor wet or corrosive environments indoors or outdoors. 7 position screw clamp terminalblock on lid accepts up to No. 10 AWG wire. Cable connectors: (2) watertight nyloncompression fittings. 0.69-395 cable diameters.4” x 4” x 2-1/2” deep. Mounting ears molded into base.Part Number Weight Stock Price CNM-44B 1 lb 2440 $ 77.00

NM-44B

Splicing kit - HBMCable splicing kit contains sufficient materials to make two waterproof cable splices (atone time) of 4 conductor to 4 conductor or 4 conductor to 6 conductor load cell cable upto 5/8” dia. The connection uses a small printed circuit board with solder tabs forterminating the individual conductors. Mold has 4-3/8” length and 1-1/4” dia. Each kitcontains material for two connections, 2 mold forms, 2 printed circuit boards, 1 mixing bagwith resin and hardener, 5 cleaning pads, 1 roll pvc tape, 1 roll cloth tape, 1 strip emerycloth, 8 cable ties (strain reliefs), 2 strips waterproofing puttyPart Number Weight Stock Price CKVM cable splicing kit 2 lb 653 $ 225.00(sufficient for 2 splices)

Splicing kit - ScotchcastInline splicing kit for shielded or non-shielded cable 1/4” to 5/8” dia. The translucent bodyis made of strong plastic in molded body halves. Mold body length is 7-3/16”. Tongueand groove design provides a firm, solid joint. Simply snap together around the spliceand seal the ends. Mix the 2104 Electrical Insulating and Sealing Compound in its Unipakcontainer and pour it into the mold. 2104 Compound is a two part, low viscositypolyurethane for permanent splice protection. This compound flows well - even at lowtemperatures. It fills mold bodies completely and eliminates voids. Cure time is about 1hour at 72 deg F and 20 hours at 20 deg F. The Unipak container allows fast mixing ofpremeasured portions that pour cleanly from the container. No tools or containers areneeded. A loosely woven polyester spacer web, bonded to the inside of the mold body,allows even distribution of the compound around the splice. Included in the kit arecompound, rubber tape end-sealing strips, and instructions. Excellent moisture sealprotects against water entry.Part Number Weight Stock Price D72-N1 1 lb 768 $ 93.70





Components

Cable

4 conductor cable

6 conductor cable

4 conductor cable

6 conductor cable

Armor Braid Cable

Load cell cable4 Conductor and 6 Conductor 20 gage (AWG) stranded tinned copper, vinyl insulation,aluminum shield with drain wire (100% shield coverage), vinyl jacket. Resistance is 10.3ohms per 1,000 ft.4 Cond : Black, white, red, green and shield.6 Cond : Black, white, red, green, yellow, blue and shield.Part Number Weight Stock Price C4 Conductor1 to 499 ft 4 lb/100 ft 190 $ 1.10/ft500 ft roll 20 lb 241 450.00(.85/ft))1000 ft roll 40 lb 242 750.00(.70/ft))

6 Conductor1 to 499 ft 6 lb/100 ft 191 2.00/ft500 ft roll 30 lb 244 800.00(1.60/ft))1000 ft roll 60 lb 245 1,400.00(1.35/ft))

High performance load cell cableThe best available insulation resistance. The highest quality toughness and abrasionresistance. 4 Conductor and 6 Conductor 20 gage AWG stranded tinned copper. Eachconductor is insulated with Teflon which has the highest dielectric constant available.Shielding is tinned copper braid. Outer jacket is polyurethane for superior abrasionresistance. Consequently, the initial installation which requires stripping the jacket toexpose the conductors is made more difficult with the tough polyurethane. But the longterm benefits of this extremely strong jacket is worth the extra effort in installation.Resistance is 10.3 ohms per 1,000 ft.Part Number Weight Stock Price C4 Conductor (1/4” dia)1 to 499 ft 7 lb/100 ft 1904 $ 2.00/ft500 ft roll 35 lb 1905 975.00(1.95/ft))1000 ft roll 65 lb 1906 1,900.00(1.90/ft))

6 Conductor (5/16” dia)1 to 499 ft 10 lb/100 ft 1907 3.60/ft500 ft roll 50 lb 1908 1,800.00(3.35/ft))1000 ft roll 100 lb 1909 3,600.00(3.10/ft))

Armor braid load cell cablePrevent rodents from eating through load cell cable with this stainless steel armor braid.4 Conductor 22 gage (AWG) and 6 Conductor 20 gage (AWG) stranded tinned copper.Each conductor is insulated with PVC and has a secondary nylon jacket. Next a Mylarsheath with a min of 35% overlap coverage. Shielding is tinned copper braided shield with90% min coverage. Jacket is grey polyurethane. Armor braid is stainless steel for rodentand abrasion protection. 22 gage (AWG) resistance is 14.7 ohms per 1,000 ft. 20 gage(AWG) resistance is 10.3 ohms per 1,000 ft.4 Cond : Black, white, red, green and shield.6 Cond : Black, white, red, green, yellow, blue and shield.Part Number Weight Stock Price D4 Conductor 22 gage (5/16” dia)1 to 499 ft 7 lb/100 ft 1073 $ 4.75/ft500 ft roll 35 lb 1074 2,250.00(4.50/ft))

6 Conductor 20 gage (7/16” dia)1 to 499 ft 10 lb/100 ft 1665 6.25/ft500 ft roll 50 lb 1666 2,875.00(5.75/ft))


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Mounting

Rod EndsExternally threaded with jam nut.Thread Static load Each(UNF) Length Bore Shank Dia Width Capacity Weight Stock Price D1/4-28 1.562 0.250 1.000 0.750 0.375 2,157 lb 1 lb 178 $ 10.203/8-24 1.938 0.375 1.250 1.000 0.500 4,916 lb 1 lb 179 12.801/2-20 2.438 0.500 1.500 1.312 0.625 8,075 lb 1 lb 180 13.30

5/8-18 2.625 0.625 1.625 1.500 0.750 9,509 lb 1 lb 433 18.303/4-16 2.875 0.750 1.750 1.750 0.875 13,831 lb 1 lb 434 25.001-14 4.125 1.000 2.125 2.750 1.375 43,541 lb 2 lb 181 97.40

1-12 4.125 1.000 2.125 2.750 1.375 43,541 lb 3 lb 1012 100.301-1/4-12 4.125 1.250 2.125 2.750 1.093 44,500 lb 3 lb 1013 125.001-1/2-12 5.375 1.500 3.000 3.500 1.312 96,510 lb 5 lb 1014 207.002-12 8.000 2.000 4.625 5.000 1.750 225,457 lb 14 lb 1015 397.00

Rod Ends with Teflon liner for electrical isolation.Use Bonding Braid across load cell to give a parallel path for high voltage and currentpresent in lightning strikes.Thread Static load Each(UNF) Length Bore Shank Dia Width Capacity Weight Stock Price D1/4-28 1.562 0.250 1.000 0.750 0.375 2,158 lb 1 lb 322 $ 15.301/2-20 2.438 0.500 1.500 1.312 0.625 6,660 lb 1 lb 323 25.303/4-16 2.875 0.750 1.750 1.750 0.875 11,518 lb 1 lb 324 44.30

Stainless Steel Rod Ends with Teflon liner for electrical isolation.Stainless steel for corrosion resistance. Use Bonding Braid across load cell to give aparallel path for high voltage and current present in lightning strikes.Thread Static load Each(UNF) Length Bore Shank Dia Width Capacity Weight Stock Price D3/8-24 1.938 0.375 1.250 1.000 0.500 8,627 lb 1 lb 3263 $ 58.501/2-20 2.438 0.500 1.500 1.312 0.625 15,130 lb 1 lb 3264 71.205/8-18 2.625 0.625 1.625 1.500 0.750 16,922 lb 1 lb 3265 98.503/4-16 2.875 0.750 1.750 1.750 0.875 25,549 lb 1 lb 3266 122.30

Rod End

Rod EndStainless Steel

Clevis

ClevisZinc plated steel with jam nut. Used to connect rod ends to threaded rod or bolts. Has1/4-20 machine screw for termination of bonding braid (ground strap). Teflon washersprovide electrical isolation for lightning protection. Electrical isolation is complete whenused with Rod End that has Teflon liner.Thread Capacity Pin Dia Gap at pin Weight Stock Price D1/4-20 UNC 300 lb 0.240” .250 1 lb 587 $ 61.003/8-16 UNC 300 lb 0.365” .375 1 lb 588 63.001/2-13 UNC 3,000 lb 0.490” .500 1 lb 488 66.00

5/8-11 UNC 10,000 lb 0.615” .675 2 lb 589 69.003/4-10 UNC 10,000 lb 0.740” .750 3 lb 590 89.001-8 UNC 10,000 lb 0.620” .780 3 lb 1664 130.00





Components

TAA Tension Alignment Assembly

Tension Alignment AssemblyEach alignment assembly includes an internally coarse threaded housing w/wrench flatswhich contains a Teflon insulator that mates with a spherical headed stud w/fine thread.The 3/4” and 1” units have a Delrin insulator. Includes (1)fine jam nut and (1)coarse jamnut. Side of housing has 1/4-20 tapped hole for attaching ground strap. Grounding screwnot included. Zinc and clear chromate plated.Part Number Length Capacity Weight Stock Price DTAA-1/4-28 to 1/4-20 4” 300 lb 1 lb 3287 $ 100.00TAA-3/8-24 to 3/8-16 4” 300 lb 2 lb 3288 100.00

TAA-1/2-20 to 1/2-13 4” 3,000 lb 2 lb 3289 105.00TAA-1/2-20 to 5/8-11 4” 3,000 lb 2 lb 1273 105.00

TAA-3/4-16 to 3/4-10 5.38” 10,000 lb 4 lb 3290 111.00TAA-3/4-16 to 1-8 5.38” 10,000 lb 4 lb 2950 111.00

TAA-1-14 to 1-8 5.25” 15,000 lb 4 lb 3041 187.00TAA-1-14 to 1 1/4-7 5.25” 15,000 lb 5 lb 2951 187.00

Mounting

Eye NutsForged steel, galvanized(zinc coating) with jam nut.Size Inches Inside Dimensions Weight Stock Price D1/4-20 0.75 x 1.063 1 lb 447 $ 18.753/8-16 1.00 x 1.250 1 lb 448 18.751/2-13 1.25 x 1.500 1 lb 449 11.90

5/8-11 1.50 x 2.000 1 lb 450 18.503/4-10 1.75 x 2.375 2 lb 451 22.501-8 2.25 x 3.063 3 lb 452 49.30

Tension mounting assemblyForged steel, zinc plated. Each assembly includes 2 eye nuts, 2 links, 2 eye bolts, 2coarse jam nuts, 2 fine jam nuts. You will save 10% off the individual prices when you getthe complete assembly.Load cell Steelyard AssemblyThread Thread Length Weight Stock Price D1/4-28 UNF 1/4-20 UNC 8.5 1 lb 173 $ 57.603/8-24 UNF 3/8-16 UNC 11.5 2 lb 174 49.201/2-20 UNF 1/2-13 UNC 13.25 3 lb 175 56.20

5/8-18 UNF 5/8-11 UNC 16.25 4 lb 176 78.703/4-16 UNF 3/4-10 UNC 18.75 8 lb 453 109.001-14 UNF 1-8 UNC 23.75 17 lb 177 298.00

Eye Nut

Tension Mounting Assembly


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Mounting

Insulated tension mounting assemblyForged steel, zinc plated. Each assembly includes 2 insulators, 2 threaded adapters, 2eye nuts, 2 links, 2 eye bolts, 2 coarse jam nuts, 2 fine jam nuts. You will save 10% offthe individual prices when you get the complete assembly.

Load cell Steelyard AssemblyPart Number Thread Thread Length Weight Stock Price DTMAI-1/4 1/4-28 UNF 1/4-20 UNC 11.5 2 lb 5387 $ 68.50TMAI-3/8 3/8-24 UNF 3/8-16 UNC 17.5 5 lb 5388 111.50

TMAI-1/2 1/2-20 UNF 1/2-13 UNC 19.25 7 lb 5389 144.00

Insulated tension mounting assembly

Tension Mounting BoltEach mounting bolt includes a hex machine screw, mating pair of spherical washers andjam nut, zinc plated.Recommend using a safety factor of 4 to 1.Thread Tensile(UNF-2) Length Strength Weight Stock Price DTMB-1/4-28 1.5” 5,880 lb 1 lb 454 $ 6.00TMB-3/8-24 2” 13,247 lb 1 lb 455 7.95TMB-1/2-20 2.5” 23,550 lb 1 lb 456 10.50TMB-5/8-18 3” 36,797 lb 1 lb 457 13.25TMB-3/4-16 3.5” 52,987 lb 1 lb 458 18.45TMB-1-14 4” 94,200 lb 2 lb 459 52.50TMB-1-1/4-12 5” 128,789 lb 4 lb 1031 115.45TMB-1-1/2-12 6” 185,456 lb 5 lb 1032 144.25TMB-2-12 7” 329,700 lb 14 lb 1033 173.45Tension Mounting Bolt





Components

Mounting

Stainless Steel Eye BoltsForged stainless steel with external threads and stainless steel jam nut.Recommend using a safety factor of 4 to 1.

Overall Shank Inside Outside Ultimate EachThread length length eye eye Strength Weight Stock Price D(UNF) Fine thread1/4-28 2.000 1.00 0.750 1.187 2,500 lb 1 lb 1763 $ 36.001/2-20 3.125 1.50 1.187 2.000 12,000 lb 1 lb 1764 83.003/4-16 4.063 2.00 1.500 2.813 20,000 lb 1 lb 1765 88.80

Eye bolt

Link

Eye BoltsForged steel. Externally threaded with jam nut. Zinc plated.Recommend using a safety factor of 4 to 1.

Overall Shank Inside Outside Ultimate EachThread length length eye eye Strength Weight Stock Price D(UNF) Fine thread1/4-28 2.000 1.00 0.750 1.187 2,500 lb 1 lb 182 $ 6.203/8-24 2.875 1.25 1.000 1.813 5,200 lb 1 lb 183 8.201/2-20 3.125 1.50 1.187 2.000 12,000 lb 1 lb 184 9.90

5/8-18 3.687 1.75 1.375 2.500 16,000 lb 1 lb 185 12.403/4-16 4.063 2.00 1.500 2.813 20,000 lb 1 lb 440 18.451-14 5.187 2.50 1.813 3.562 36,000 lb 2 lb 186 40.50

1 1/4-12 7.500 3.00 2.187 4.438 75,000 lb 5 lb 1671 94.001 1/2-12 8.750 3.50 2.500 5.187 105,000 lb 8 lb 1672 198.002-12 11.875 4.00 3.250 6.875 140,000 lb 18 lb 1673 310.00

(UNC) Coarse thread1/4-20 2.000 1.00 0.750 1.187 2,500 lb 1 lb 1112 6.201/2-13 3.125 1.50 1.187 2.000 12,000 lb 1 lb 583 9.70

Connecting LinksForged steel, zinc plated with interlocking lugs.Size (Inches) Inside Dimensions Weight Stock Price D1/4 0.438 x 0.813 1 lb 441 $ 6.103/8 0.563 x 1.094 1 lb 442 7.201/2 0.719 x 1.469 1 lb 443 9.00

5/8 0.813 x 1.750 1 lb 444 14.603/4 0.938 x 2.063 2 lb 445 20.201 1.750 x 2.625 3 lb 446 49.001 1/4 1.500 x 3.156 5 lb 736 68.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Mounting

Tension Cable w/adjustable ends

TC1/2-20/13-5.5

TC1/2-13-BALL

TC3/4-10-BALL

TC1/2-13-M12-5.5

Tension cable w/adjustable endsWire rope assembly has UNF (fine thread) on one fitting and UNC (coarse thread) on theother. The fittings on both ends of the cable will turn independently to allow for easyinstallation and adjustment. Threaded fittings are zinc plated steel with wrench flats.Galvanized cable with swaged stainless steel ball and shank on each end. Each endfitting has jam nut. Capacity is based on OSHA safety factor of 4 to 1.

Overall Rated Ultimate EndThread Length Capacity Strength Fittings Weight Stock Price DTC1/4-28/20 3.5” 120 lb 480 lb 1/4-28 1”lg 1 lb 752 $20.90

1/4-20 1”lgTC1/4-28/16 4.0” 240 lb 480 lb 1/4-28 1”lg 1 lb 1393 43.40

3/8-16 1.25”lg

TC3/8-24/16 4.25” 230 lb 920 lb 3/8-24 1.25”lg 1 lb 753 23.903/8-16 1.25”lg

TC3/8-24/13 4.75” 230 lb 920 lb 3/8-24 1.25”lg 1 lb 1394 29.901/2-13 1.5”lg

TC1/2-20/13 5” 700 lb 2,800 lb 1/2-20 1.5”lg 1 lb 754 42.601/2-13 1.5”lg

All stainless steel constructionTC1/4-28/20-SS 3.5” 120 lb 480 lb 1/4-28 1”lg 1 lb 872 59.00

1/4-20 1”lg

TC1/2-20/13-SS 5” 700 lb 2,800 lb 1/2-20 1.5”lg 1 lb 4893 54.001/2-13 1.5”lg

Tension cable w/swaged endsWire rope assembly has UNF (fine thread) on one fitting and UNC (coarse thread) on theother. Galvanized cable with swaged zinc plated threaded steel fittings on each end.Each end fitting has jam nut. Capacity is based on OSHA safety factor of 4 to 1.Thread Length Capacity Strength Fittings Weight Stock Price DTC1/2-20/13-5.5 5.5” 1,400 lb 7,000 lb 1/2-20 1.5”lg 1 lb 1397 $ 36.40

1/2-13 1.5”lg

TC1/2-13-BALL 6” 2,000 lb 8,000 lb 1/2-13 1.5”lg 1 lb 1838 30.75Used on Cardinal FH & EP 0.81”dia ball

TC3/4-10-BALL 6.31” 3,600 lb 14,400 lb 3/4-10 2”lg 1 lb 1840 54.00Used on Cardinal FH & EP 1-1/4”dia ball

MetricAll stainless steel constructionTC1/2-13-M12 5.5” 1,400 lb 7,000 lb M12 1.5”lg 1 lb 1693 61.00

1/2-13 1.5”lg





Components

Mounting

Load cell insulatorsProtect load cells from damaging high voltage and current. Electrically isolate the load cellwith one insulator at each end mounted in the tension hardware. Use in areas whereclose lightning strikes cause load cell burnouts. Observe OSHA recommendation of 4:1safe working load ratio.Thread Capacity Strength Thread Size Weight Stock Price C52165-1A 150 lb 600 lb 1/4-20UNC 1-1/8”x1”h 1 lb 427 $ 11.00

x 1/4”deep5612-28 150 lb 600 lb 1/4-28UNF 1”x1”h 1 lb 1048 12.00

x 5/16”deep

2781-16 750 lb 3,000 lb 3/8-16UNC 2-1/2”x2-1/2”h 1 lb 428 16.50x 1/2”deep

2781-24 750 lb 3,000 lb 3/8-24UNF 2-1/2”x2-1/2”h 1 lb 463 37.60x 1/2”deep

2781-13 750 lb 3,000 lb 1/2-13UNC 2-1/2”x2-1/2”h 1 lb 429 12.90x 5/8”deep

2781-20 750 lb 3,000 lb 1/2-20UNF 2-1/2”x2-1/2”h 1 lb 462 35.25x 3/4”deep

2781-20/13 750 lb 3,000 lb 1/2-20UNF 2-1/2”x2-1/2”h 1 lb 966 33.25& 1/2-13UNC

x 3/4”deep

ST-1015 3,000 lb 12,000 lb 1/2-13UNC 2-13/32”x 2 lb 382 59.80x9/16”deep(gray) 2-13/32”h

2165 5612 2781

ST-1015

Threaded Adapter

Threaded adaptersExternally threaded for connecting load cells to insulators. Also useful where mountingspace is limited. Steel, zinc plated. Adapters have jam nuts at each end.Part Number Thread Length Weight Stock Price DA 1/4-28/28 1/4-28 full length 1.00” 1 lb 699 $ 3.20A 1/4-28/20 1/4-28x1/2”lg 1/4-20x1/2”lg 1.00” 1 lb 717 3.20

A 1/4-28/16 1/4-28x1”lg 3/8-16x1”lg 2.00” 1 lb 1409 6.70A 1/4-28/24 1/4-28x1”lg 3/8-24x1”lg 2.00” 1 lb 1410 7.90

A 3/8-24/24 3/8-24 full length 1.25” 1 lb 718 3.00A 3/8-24/16 3/8-24x1”lg 3/8-16x1”lg 2.00” 1 lb 719 3.20

A 1/2-20/20 1/2-20 full length 1.50” 1 lb 720 3.20A 1/2-13/13 1/2-13 full length 1.50” 1 lb 2346 3.20A 1/2-20/13 1/2-20x1”lg 1/2-13x1”lg 2.00” 1 lb 721 3.95

A 1/2-20/13-2.5 1/2-20x1-3/4”;1/2-13x3/4” 2.50” 1 lb 1405 7.65A3/4-16/10-3.25 3/4-16x3-1/4”;3/4-10x1-1/8” 3.25” 1 lb 1406 12.10

A 1/2-13x12” 1/2-13 full length 12” 1 lb 496 8.50A 3/4-10x12” 3/4-10 full length 12” 1 lb 497 11.85


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Mounting

Quick linkZinc plated link easily connects mounting hardware such as shackles, eye bolts, links, eyenuts and chain.

WorkingSize Load limit Weight Stock Price D1/4” Quick link 880 lb 1 lb 1945 $ 5.405/16” Quick link 1,540 lb 1 lb 1946 6.30

3/8” Quick link 2,200 lb 1 lb 1947 8.501/2” Quick link 3,300 lb 1 lb 1948 13.80

Forged ShacklesUsed to connect rod ends to eye bolts, eye nuts or hooks.Nominal Pin GapSize Capacity Dia. Pin Weight Stock Price D1/4 1000 lb 5/16 .500 1 lb 435 $ 6.203/8 2000 lb 7/16 .656 1 lb 436 8.507/16 3000 lb 1/2 .719 1 lb 437 10.80

1/2 4000 lb 5/8 .813 1 lb 438 11.803/4 7500 lb 7/8 1.250 1 lb 439 29.00

Quick link

Shackle

Spherical Washer

Spherical Washer pairConcave and convex pair of washers are used to provide a firm mounting surface for arod or bolt when there is a slight off perpendicular condition.Part Number I.D. O.D. Thickness Weight Stock Price DBlack finish tool steel1/4” Spherical washer 9/32 5/8 3/16 1 lb 755 $ 4.803/8” Spherical washer 13/32 7/8 1/4 1 lb 756 5.751/2” Spherical washer 17/32 1-1/8 5/16 1 lb 757 7.33

5/8” Spherical washer 21/32 1-3/8 5/16 1 lb 758 8.633/4” Spherical washer 25/32 1-5/8 3/8 1 lb 759 11.161” Spherical washer 1-1/16 2 1/2 1 lb 760 16.58

1-1/4” Spherical washer 1-5/16 2-5/8 1/2 1 lb 761 35.831-1/2” Spherical washer 1-9/16 2-7/8 9/16 1 lb 762 42.382” Spherical washer 2-1/16 3-7/8 3/4 2 lb 763 64.72

Stainless steel1/4” SS spherical washer 9/32 5/8 3/16 1 lb 1161 8.883/8” SS spherical washer 13/32 7/8 1/4 1 lb 1162 12.911/2” SS spherical washer 17/32 1-1/8 5/16 1 lb 1163 16.30

5/8” SS spherical washer 21/32 1-3/8 5/16 1 lb 1164 18.193/4” SS spherical washer 25/32 1-5/8 3/8 1 lb 1165 23.051” SS spherical washer 1-1/16 2 1/2 1 lb 1166 33.15

1-1/4” SS spherical washer 1-5/16 2-5/8 1/2 1 lb 1167 53.881-1/2” SS spherical washer 1-9/16 2-7/8 9/16 1 lb 1168 87.912” SS spherical washer 2-1/16 3-7/8 3/4 2 lb 1169 108.75


Mounting




TB2/TB3Bearing cup

and 7/8” dia ball

Load button

Compression load buttonFor use with “S” type load cells. Stainless steel spherical button with nylon washer.Part Number Capacity Length Weight Stock Price D1/4-28 “S” cell load button 25 to 300 lb 0.50” 1 lb 2459 $ 53.003/8-24 “S” cell load button 25 to 300 lb 0.68” 1 lb 2460 53.00

For use with Canister load cells. Stainless steel spherical button.Part Number Capacity Length Weight Stock Price D1”-14 load button 5K to 15K 1.50” 1 lb 604 $ 122.50

LBA load button

Components

ConicalLoad button

100-300 lb

TLC1220Load cup

Compression load buttonFor use with HBM model SB3 and RTI model SSB load cells. Includes hardened steelspherical button with bolt and washer.Part Number Capacity Weight Stock Price DLBA-5K load button 1,2,5 K 1 lb 1910 $ 80.00LBA-15K load button 10,15 K 1 lb 1911 84.00

Load CupLoad cup for use with single ended beam load cells. Heat treated and polished stainlesssteel construction. Screw driving slot at end of stud for vertical adjustment.. Ball is notincluded with cup.Part Number Ball Thread Length Weight Stock Price CTLC1220 load cup 5/8” dia 1/2-20 1.25” 1 lb 5362 $ 18.00TLC3416 load cup 7/8” dia 3/4-16 1.50” 1 lb 5363 23.00

Load ButtonLoad button for use with single ended beam load cells. Heat treated and polishedstainless steel construction. Wrench flats for easy disassembly.Part Number Capacity Thread Length Weight Stock Price DTLB1220 load button 250 to 5K 1/2-20 0.7” 1 lb 2915 $ 42.50TLB3416 load button 5 to 10K 3/4-16 0.9” 1 lb 2916 152.00

Ball Cup or ConeBearing cup and ball or conical load button for use with TB2 and TB3 single ended beamload cells. Wrench flats on end of stud for vertical adjustment.Part Number Weight Stock Price DBearing cup and 7/8” dia ball for TB2/TB3 beam 1 lb 1474M 82.00Conical load button for TB2/TB3 beam 1 lb 708M 54.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Mounting



Components

3”x4”x5/8”1/2-13Mounting plate, for welding

Spacer plates for singleended beam load cells

FRL2 Hole Retainer

FR4 Hole Retainer

Mounting Plate for floor scale load beam cellsThis mounting plate is 3” x 4” x 5/8” thick with (2) drilled and tapped 1/2-13UNC threadhaving 1” spacing center to center. This plate is for welding to the underside of a floorscale to provide a convenient mounting surface for the single ended load beam cells.Plate is unpainted without any plating or finish. Must be primed and painted with the floorscale.Part Number Weight Stock Price C3”x4”x5/8”1/2-13 Mounting plate 2 lb 2791 $ 14.25

Spacer for beam cellsThis Stainless steel spacer plate will provide clearance between a single ended beamcell and the mounting surface. Three thicknesses 0.080”, 1/4” and 3/8” are available. Thehole size and spacing will fit typical beam load cellsPart Number Thickness Size Capacity Weight Stock Price DTBS-80-5 0.080” 1.25” x 2.25” 1K-5K SE 1 lb 6623 $ 6.25TBS-80-10 0.080” 1.50” x 3.00” 5K-10K 1 lb 6624 7.75

TBS-1/4-5 1/4” 1.25” x 2.25” 1K-5K SE 1 lb 6625 10.00TBS-1/4-10 1/4” 1.50” x 3.00” 5K-10K 1 lb 6626 12.05TBS-1/4-20 1/4” 2.00” x 4.00” 15K-20K 2 lb 6627 16.65

TBS-3/8-5 3/8” 1.25” x 2.25” 1K-5K SE 1 lb 6628 11.65

Spacer for beam cells, (nickel plated)TBS-1/4-5-NP 1/4” 1.25” x 2.25” 1K-5K SE 1 lb 6536 6.00

Foot Retainer (New installation)Foot retainer for new installation of floor scales. The mild steel plate has 4 mountingholes and is completely under the floor scale platform. The hole diameter is 1/8” largerthan the foot dia for easy installation.Part Number Size Foot dia Hole dia Weight Stock Price CFR-1.875 4” x 4” x 1/4” 1-3/4” 1-7/8” 1 lb 6459 $ 13.90FR-2.000 4” x 4” x 1/4” 1-7/8” 2” 1 lb 6607 13.90FR-2.125 4” x 4” x 1/4” 2” 2-1/8” 1 lb 6608 13.90

FR-2.625 4” x 4” x 1/4” 2-1/2” 2-5/8” 1 lb 6609 15.00FR-3.125 4.5” x 4.5” x 1/4” 3” 3-1/8” 1 lb 6610 15.70

Foot Retainer (Existing installation)Foot retainer for existing scales. When a scale cannot be removed for adding retainers,these longer two hole mild steel versions make the task easy. Simply raise each corner ofthe floor scale and slip the foot retainer under the beam foot. The two mounting holesextend past the edge of the floor scale platform for drilling and bolting to the floor. Thewhole diameter is 1/8” larger than the foot dia for easy installation.Part Number Size Foot dia Hole dia Weight Stock Price CFRL-1.875 4” x 4” x 1/4” 1-3/4” 1-7/8” 1 lb 3131 $ 13.90FRL-2.000 3” x 4.5” x 1/4” 1-7/8” 2” 1 lb 4630 13.90FRL-2.125 3” x 4.5” x 1/4” 2” 2-1/8” 1 lb 4631 13.90

FRL-2.625 4” x 4.5” x 1/4” 2-1/2” 2-5/8” 1 lb 4632 15.00FRL-3.125 4” x 5” x 1/4” 3” 3-1/8” 1 lb 4633 15.70FRL-3.625 4.5” x 6” x 1/4” 3-1/2” 3-5/8” 1 lb 4795 18.05


Mounting




Components

Jam NutsHex nut, zinc platedFine Thread (UNF) Weight Stock Price D1/4-28 1 lb 1125 $ .143/8-24 1 lb 1126 .141/2-20 1 lb 1127 .14

5/8-18 1 lb 1128 .243/4-16 1 lb 1129 .491-14 1 lb 1130 1.60

1-12 1 lb 1184 4.901 1/4-12 1 lb 1183 7.201 1/2-12 1 lb 1182 6.202-12 1 lb 1181 31.00

Coarse Thread (UNC) Weight Stock Price D1/4-20 1 lb 1131 $ .143/8-16 1 lb 1132 .141/2-13 1 lb 1133 .14

5/8-11 1 lb 1134 .243/4-10 1 lb 1135 .491-8 1 lb 1136 .64

Jam Nuts, Stainless steelHex nut, stainless steelFine Thread (UNF) Stock Price D1/4-28 UNF SS 1 lb 1760 $ .903/8-24 UNF SS 1 lb 1565 1.301/2-20 UNF SS 1 lb 1761 1.40

5/8-24 UNF SS 1 lb 1566 1.753/4-16 UNF SS 1 lb 1762 1.90

Coarse Thread (UNC) Weight Stock Price D1/4-20 UNC SS 1 lb 211 $ .901/2-13 UNC SS 1 lb 4892 1.40

Jam nuts


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Mounting



Components

Beam feetThese feet screw into the threaded load hole in single ended beam load cells.

Stainless steel captive ball bearing foot with 10 deg pivoting and 360 deg rotation.Part Number Min Ht Max Ht Pad Wt Stock Price DCBBF-1/2-20x1-7/8-SS 1-3/4” 3” 1-7/8” dia 1 lb 4864 $ 47.00CBBF-1/2-20x2-SS 1-3/4” 3” 2” dia 1 lb 4865 47.00CBBF-1/2-20x2-1/2-SS 1-3/4” 3” 2-1/2” dia 1 lb 4866 50.00CBBF-1/2-20x3-SS 1-3/4” 3” 3” dia 1 lb 4020 52.00

CBBF-3/4-16x3-SS 2-1/2” 4-1/4” 3” dia 2 lb 4021 81.00CBBF-1-14x3-SS 2-1/2” 4-1/4” 3” dia 2 lb 4022 94.00CBBF-1-12x3-SS 2-1/2” 4-1/4” 3” dia 2 lb 4023 94.00

Alloy steel captive ball bearing foot with 10 deg pivoting and 360 deg rotation.Part Number Min Ht Max Ht Pad Wt Stock Price DCBBF-1/2-20x1-7/8-AS 1-3/4” 3” 1-7/8” dia 1 lb 4867 $ 31.00CBBF-1/2-20x2-AS 1-3/4” 3” 2” dia 1 lb 4868 31.00CBBF-1/2-20x2-1/2-AS 1-3/4” 3” 2-1/2” dia 1 lb 4869 38.00CBBF-1/2-20x3-AS 1-3/4” 3” 3” dia 1 lb 4870 48.00

CBBF-3/4-16x3-AS 2-1/2” 4-1/4” 3” dia 2 lb 4871 55.00CBBF-1-14x3-AS 2-1/2” 4-1/4” 3” dia 2 lb 4872 63.00CBBF-1-12x3-AS 2-1/2” 4-1/4” 3” dia 2 lb 4873 63.00

Rubber cap for CBBF. Molded rubber caps for harsh or wet environments.Part Number Wt Stock Price DRubber cap for 1/2-20x1-7/8” & 2” dia 1 lb 4874 $ 6.60Rubber cap for 1/2-20x2-1/2” & 3” dia 1 lb 4875 6.60Rubber cap for 3/4-16x3” dia 1 lb 4876 7.50

Beam feetReplacement feet that are commonly used on Weigh-Tronix® floor scales. They aremade of solid stainless steel for hard usage. These feet screw into the threaded load holein single ended beam load cells.Part Number Wt Stock Price DWF-1/2-13x1-3/4 1 lb 4877 $ 31.00WF-5/8-11x2 1 lb 4878 45.00

CBBF

WF

EBF 1420

Beam feet - MetricAlloy steel swivel foot with non slip rubber base. Ball and rocker socket design preventsdebris from entering joint. Allows horizontal movement similar to rocker pin design. Builtin hex nut for height adjustment.Part Number Wt Stock Price DTBF-M12 1 lb 6904 $ 30.00TBF-M18 2 lb 6905 45.00

TBF

TBF Disassembled

NEWNEW

Scale footFor use with Pennsylvania Scales, bases and scales. Plastic end cap with 1/4-20 UNCstainless steel stud.Part Number Wt Stock Price DEBF1420 Plastic SS foot 1/4-20 1 lb 270 $ 8.95





Components

Mounting

TBF

SBF-SS

SBF

Beam feetThese feet screw into the threaded load hole in single ended beam load cells.

Stainless steel stud and base will resist corrosion. Uneven floors are accommodatedwith the oblique spheroid joint which has hex wrench flats and jam nut for heightadjustment. The ball and socket joint has the ball under the socket which keeps dust anddirt from entering joint. Bottom of foot is bonded with rubber to stop slipping. 30 degreeswivel and 360 degree rotation.Part Number Min Ht Max Ht Pad Wt Stock Price DTBF1/2-20-SS 2-1/8” 3-3/8” 3” dia 2 lb 1781 $ 56.00TBF3/4-16-SS 2-3/4” 4-1/8” 3 1/2” dia 3 lb 1782 93.00

Beam feetStainless steel heat treated and electropolished. Rubber insert is bonded into a recessat the bottom of the foot. This prevents the foot from sliding on the floor. 60 deg swiveland 360 deg rotation.Part Number Min Ht Max Ht Pad Wt Stock Price DSBF3/8-16SS 1-3/8” 2-1/2” 1-1/4” dia 1 lb 1241 $ 18.00SBF1/2-20x1-7/8-SS 1-3/4” 3-1/4” 1-7/8” dia 1 lb 584 41.00SBF1/2-20x3-SS 1-3/4” 3-1/4” 3” dia 2 lb 2677 52.00SBF3/4-16-SS 2-3/8” 4-1/4” 3” dia 2 lb 585 83.00

Scale footSBF5/16-18SS 1-3/8” 2 1/2” 1 1/4” dia 1 lb 1497 18.00

Beam feetAlloy steel with zinc plate finish. Rubber insert is bonded into a recess at the bottom ofthe foot. This prevents the foot from sliding on the floor. 60 deg swivel and 360 degrotation.Part Number Min Ht Max Ht Pad Wt Stock Price DSBF1/2-20 1-3/4” 3-1/4” 1-7/8” dia 1 lb 73 $ 33.00SBF3/4-16 2-3/8” 4-1/8” 3” dia 2 lb 75 60.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Mounting

NBF

RBF

DBF

NEWNEWBeam feetDiamond Brand swivel beam foot. Alloy steel swivel ball bearing foot with non-sliprubber base.Part Number Min Ht Max Ht Pad Wt Stock Price DDBF 1/2-20 2-3/8” 4” 2-3/8” 1 lb 2522 $ 28.00DBF 3/4-16 2-1/8” 3-3/8” 2-3/8” 2 lb 2526 42.00

Beam feetNeoprene rubber with steel insert for 10 deg pivoting and 360 deg rotation.Part Number Min Ht Max Ht Pad Wt Stock Price DNBF1/2-20 1-7/8” 3-1/4” 3” dia 1 lb 77 $ 34.00NBF3/4-16 2-1/2” 4-1/8” 5” dia 3 lb 79 80.00

Beam feetRigid rubber with steel insert for no pivoting and no rotation.Part Number Min Ht Max Ht Pad Wt Stock Price DRBF1/2-20x1-7/8 1” 3” 1-7/8”dia 1 lb 4024 $ 14.00RBF1/2-20x2-1/2 1” 3” 2-1/2”dia 1 lb 4025 14.00RBF1/2-20x3 1” 3” 3” dia 1 lb 4026 14.00RBF3/4-16x3 1” 3” 3” dia 1 lb 5381 30.00





Components

Supplies

3 Conductor power supply cord6’ lg, gray SVT vinyl with molded vinyl grounding plug, 18 gage, 1250 watts, 10A, 125V.Part Number Weight Stock Price C17237 Cord w/plug & pigtails 1 lb 226 $ 4.8017250 Cord w/international jack 1 lb 1085 15.50

17237

17250


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Stop corrosion & moisture problems!Silica Gel, moisture absorbent and desiccant will keep moisture from causing signalchanges in junction boxes and instruments. Just put one or two packets of silica gel ineach junction box, instrument and printer. Avoid corrosion problems due to moisture.Packets can be reactivated and used again. An absolute necessity in every truck scalejunction box. Each packet contains 2 ounces (56 grams) of silica gel. Size 5” x 5” x 3/8”.Part Number Weight Stock Price CSorbit-2 1 lb 217 $ 2.65

Supplies

Sorbit

WLC100

Soldering StationVariable power control 5 to 40 watts. 40 watt pencil iron and ST# interchangeable tip.Replaceable heating element. Cushioned foam grip. Safety guard iron holder. On/offswitch with “Power On” indicator light. 120 VAC, 50 Hz, 60 Hz.Part Number Weight Stock Price CWLC100 3 lb 230 $ 108.00





Components

Supplies

Aluminum Security SealsAlucast and wire seal for the applications that will not accept the traditional lead and wireseal. This seal will also comply with paragraph S.1.8. of Handbook 44. This seal isinstalled using the same method as the lead and wire seal using the same sealing press.The only difference is the lead is replaced with soft aluminum. It is made of 98% 2SOaluminum with a melting point of 1200 deg F. The wire is 12” long, special spirally-woundgalvanized steel, 0.044” dia with approximate break strength of 17 lb.Part Number Weight Stock Price C911 Alucast & wire seal (pack of 100) 1 lb 2338 $ 38.00

81420

134 Lead & wire seals

911 Alucast & wire seals

TIK AW-12 Poly & wire seals

TIK-A Marking pliers

Press for Security SealsSecurity seals comply with paragraph S.1.8. of Handbook 44. The flexible wire goes thruholes in the indicator case and then through the seal. The sealing press will lock the wireby crimping the soft metal and emboss the characters on the dies. Sealing press, 5” long,steel construction has vinyl dipped handles. Press comes with mating pair of engraved flatdies for use on lead seals. Each die can have up to 4 letters or numbers i.e., initials onone die, company or year on other die.Allow 4 to 6 weeks for engraving dies.Part Number Weight Stock Price C814 Sealing press with engraved dies 2 lb 431 $ 186.00Replacement die, 4 characters, engraved 1 lb 432 28.80Press has 2 dies.

Lead Security SealsLead and wire seals comply with paragraph S.1.8. of Handbook 44. Lead seals are 3/8”diameter and have a cavity at one end so that when wire is doubled back through the leadit is concealed when the lead is pressed. The wire is 6” long, 3 ply 0.018” copper.Part Number Weight Stock Price C134 lead & wire seal (pack of 100) 2 lb 430 $ 58.90

Polypropylene Plastic Security SealsPolypropylene and wire seal for the applications that will not accept the traditional leadand wire seal. This seal will also comply with paragraph S.1.8. of Handbook 44. This sealis installed without any tools. A sealing press is not required. Simply insert the wirethrough the sealing holes and bend it around the insert and snap the seal closed. If theseal must be marked with identification numbers or letters, the seal would be stampedwith special marking pliers prior to installing the seal. The wire is 14” long, single strandgalvanized steel, 0.028” dia. Marking pliers have two special steel dies for impressingmarks in one or both faces of the seal. The dies are custom embossed. Each die canhave up to 4 letters or numbers i.e., initials on one die, company or year on other die.Allow 4 to 6 weeks for embossing dies.Part Number Weight Stock Price CTIK AW-14 poly & wire seal (pack of 100) 1 lb 2342 $ 64.50TIK-A Marking pliers w/o embossed dies 1 lb 2343 119.00Embossed die, 4 characters 1 lb 2344 107.00Press has 2 dies. (2) dies must be ordered separately with each pliers.


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Power

Protective enclosureEnclosure for load cell protectors, NEMA 4, waterproof, 2 screw gasketed cover, epoxypainted steel for RFI protection, 3”W x 3”D x 4-1/2”H, 1/2 lb, two 7/8” diameter holes for1/2” conduit fittings or strain reliefs. Load cell protector mounts on flat bottom surface.Part Number Weight Stock Price C403DSC 1 lb 1636 $ 38.00

Transient load cell protectorThis protector will stop electrical transients such as spikes, surges and noise fromdamaging strain gage load cells. Excitation voltage can be 18 VDC or +/-9 VDC or 9VAC. This unit will clamp the excitation voltage to 20 VDC between + and - excitationterminals, 75 VDC between any terminal and earth ground. Three active protectionstages on each of four lines. One active protection stage on the shield. Response timeon 20 VDC stage is 5 nanoseconds. Response time on 75 VDC stage is 100nanoseconds. Resistance to ground is 7500 megohms minimum. Grounding is through a1/4” lug to a 20 ft insulated #10 AWG ground wire(included). Two nylon strain reliefs for0.187”-0.312” dia cable. Chemically resistant PVC enclosure is gasketed NEMA 1,2,3 and11 intended for indoor and outdoor service. It is not NEMA 4 (washdown) or NEMA 6(submersion). Call for prices on other enclosures. 4”W x 4”D x 2.5”H, 1.4 lb.Part Number Weight Stock Price CLCP-1 load cell transient protector 4 wire 2 lb 1957 $ 191.00LCP-2 load cell transient protector 6 wire 2 lb 1752 221.00

403SC

LCP-1





Components

Power

TES-3P

Tesco Model TES-3PVoltage spike and transient protector. Two stage silicon avalanche device shunts overvoltage to ground. If first stage is removed by severe strike, second stage will continuegiving protection. If a severe second strike occurs and removes the second stage, powerwill be disconnected from protected equipment. Indicator light signals first stage failure.Indicator light and no power output signals second stage failure. (2) 120 VACreceptacles, plug in module has tab for attaching to wall plate, indicator light, 5 yearwarranty. Clamping 1st stage 170 VAC; 2nd stage 264 VAC. Response time is less than5 nanoseconds. Note: Typical voltage in electrical outlet at 120 VAC is 170 volts at thepeak of the sine wave. Normal voltage is measured as RMS (Root Mean Square). To getpeak voltage, multiply by the square root of 2 or 1.414. In this case 120 x 1.414 = 170volts peak. This unit clamps the voltage at 30 volts above the normal. 2nd stage clampsat 40 volts over normal.Part Number Weight Stock Price CTES-3P 1 lb 789 $ 100.00

Mark VII-C

Tesco Model Mark VII-CVoltage spike and transient protector. Two stage silicon avalanche device shunts overvoltage to ground. If first stage is removed by severe strike, second stage will continuegiving protection. If a severe second strike occurs and removes the second stage, powerwill be disconnected from protected equipment. Flashing light signals first stage of failure.Flashing light and no power output signals second stage failur. 6 ft line cord, (4) 115 VACreceptacles, lighted On/Off switch, indicator light, circuit breaker. 5 year warranty.Clamping 1st stage 200 VAC: 2nd stage 210 VAC. Response time is less than 5nanoseconds.Part Number Weight Stock Price CMark VII-C Tesco 1 lb 790 $ 130.00

Power line protectorSurge Voltage Protector, plug in, 117 VAC +/- 10%, 15 amps, duplex receptacle. Offersfuse protection, a power and protection light (on with power and protection). Plugs intostandard 3 prong outlet. UL listed. Clamping voltage 220 VAC +/- 10%, 15 amps, duplexreceptacle. Offers fuse protection, a power and protection light (on with power andprotection). Plugs into standard 3 prong outlet. UL listed. Clamping voltage 220 VAC.Part Number Weight Stock Price CISOBlock 1 lb 216 $ 70.00

ISOBlock


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Power

Powerware Uninterruptible Power SupplyPowerware PW3110 UPS offers basic protection in a sleek unit that easily fits under adesk or mounts on a wall.. An internal battery gives continuous power to an inverter thatconverts DC to AC. The battery is kept fully charged by a built-in charger under normalconditions. If power is interrupted due to spikes, electrical noise, harmonic powerdistortion, under voltage and blackouts, the battery and inverter continue to provide cleanpower. User replaceable battery provides easy maintenance and upkeep. Capacity is550 VA. Reserve time is 3 minutes at full load, and 6 minutes at half load. Transfer timeis 6ms. Recharge time is 8 hours. 6 ft line cord for 120 VAC 50/60 Hz, (4) receptacleswith UPS & Surge protection and (2) receptacles with surge protection only NEMA 5-15R.2.3”W x 15.5”D x 5.9”H.Part Number Output Power Weight Stock Price CPW3110 550VA UPS 425VA 12 lb 1402 $ 107.00

Tripp Lite Line ConditionerBrownout protection and surge suppression in a single cost effective unit. Lineconditioner will automatically adjust under and over voltages from 87 to 140 volts AC.This keeps you working through brownouts and prolonged over voltges. LC604 hasindicator lights for TRIM, NORMAL, BOOST. LC1200 has indicator lights for VERY HIGH,HIGH, NORM, LOW, VERY LOW, LINE FAULT, LINE OK.6 ft line cord for 120 VAC 60 Hz, (4) receptacles NEMA 5-15R. 2 year warranty.LS604: 4-3/8” x 5-1/4” x 5-3/4”HLC1200: 5-3/4” x 6-3/4” x 6-3/4”HPart Number Output Power Weight Stock Price CLS606M line conditioner 600 watts 6 lb 4090 $ 239.00LC1200 line conditioner 1200 watts 10 lb 4091 383.00

PW3110 550va UPS

EM2025Bonding Braid

LS 606MLC 1200

LS 606MRear view

Bonding Braid (Ground Strap)A flat woven braid of tinned-copper strands 7/16” wide. Bonding braid is equivalent to asolid #6 AWG copper conductor. It has 1/2” eyelets (1/4” I.D.) every 3 inches eliminatingthe need for punching holes. Bonding braid will provide a parallel path for high currentaround a load cell installation. It offers additional protection when welding or in areas oflightning activity. Connects top and bottom mounting plates in compression assemblies.Also used to shunt load cell and linkage in tension mounting.Part Number Length Weight Stock Price CEM2025-15 15” 1 lb 967 $ 9.80EM2025-21 21” 1 lb 968 13.80EM2025-30 30” 1 lb 969 19.70


Test




Components

Analog Load Cell Testing Procedure

1. Using an ohm meter, measure the following resistances on the load cell cable.A. INPUT +EX to -EXB. OUTPUT +SIG to -SIGC. +EX to +SIGD. +EX to -SIGE. -EX to +SIGF. -EX to -SIG

The input and output resistance should match the manufacturer’s specs. The otherresistance readings should all be the same and approximately 75% of the input or outputresistance.

2. Using an ohm meter, measure the following resistanceA. All leads to case.B. All leads to shield.

The resistance should be greater than 5,000 meg ohms. If it is less, there is a chance forsignal loss due to leakage to ground. Low resistance usually indicates water in the cable.

3. Using a digital test meter, measure the following load conditions.A. Unloaded.B. 2 or 3 test loads.

Unloaded reading should be within manufacturers specs, usually 1% of output.

4. If meter goes into over range, then use voltmeter and measure the following voltages.A. +EX to -EX (volts)B. +SIG to -EX (volts)C. -SIG to -EX (volts)D. +SIG to -SIG (millivolts)

The D reading should be equal to “B” - “C”.Calculate percent of output voltage with the following:

Actual zero output “D” x 100------------------------- = ---------------- = % outputFull scale output “A” x mv/V


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Test



Components

Service Tip:Use this formula to determine the microvolts per division in an electronic scale:

mv/V x excitation x 1000 x divisionMicrovolts per division = --------------------------------------------------

cell capacity x multiple

Compare with the required signal(analog input) for the weight indicator. The cellsignal should be greater than the minimum needed by the indicator.

mv/V = Load cell output. Ex: 2, 3, 1.75 mv/v

Excitation = Power to load cell. Ex: 5, 10, 12, 20 VDC

Division = Value of graduation. Ex: 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50

Cell capacity = Name plate capacity on cell. If more than (1) cell, total capacity.

Multiple = Mechanical lever ratio at cell location. Full electronic = 1.

AC MonitorA very handy device to keep track of AC power while you are not at the job site. Plug itinto the AC power receptacle where you want to monitor the power and the AC Monitorwill indicate the actual voltage from 100 VAC to 130 VAC in 5 volt steps. In case of powerextremes it will indicate which problem has occurred and sound an audible alarm. TheReset button will stop the alarm and turn off the light.

Light ConditionSPIKE Above 500 volts ACHIGH VOLT Above 130 volts ACLOW VOLT Below 105 volts ACPWR FAIL Off for 2 cycles

For use on 115 VAC circuits, 6” power cord, 2 watts, 2.5”W x 1.25”D x 4”H.Part Number Weight Stock Price CACM120 AC monitor 1 lb 1928 $ 183.00ACM120





Components

Test

TS-101 Transducer SimulatorTS-101: Ultra high impact structural copolymer. Unbreakable, watertight, dustproof,chemical resistant and corrosion proof. Designed for 0.05% high accuracy testing andcalibrating digital weight indicators. Ideal for setpoint, batching, or regular high accuracysimulation. 3 operation modes include load cell input selection of 1.75, 2.0, 3.0 mv/V. 0,10, 20, 30, 40, 50, 60, 70, 80, 90, 100% 11 position calibration knob. 10 turn zeropotentiometer. 5 position binding posts for banana plugs or timed wires. Zero adjustmentcapability for dead load or adjustment between steps. Built in digital volt meter forexcitation voltage. 1/4” neoprene o-ring and ABS latches seal perfectly and includes anautomatic purge valve for quick equalization after changes in atmospheric pressure.Floats in salt water with 7.05 lbs load. 20 VDC.Box size 7 3/8” x 4 7/8” x 3 1/16”

TS-102: The TS-102 has all the features of the TS-101 with the addition of a digital meterto display the signal voltage in millivolts (mv). An internal 9VDC battery provides powerfor the meter. Instead of 5 position binding posts, this unit has 4 banana jacks (red, black,green, white) and a 4ft test cable with banana plugs on one and pigtails at the other end.Part Number Weight Stock Price CTS-101 Simulator 4 lb 4113 $ 729.00TS-102 Simulator 4 lb 4315 883.00

NEWNEW

TS-101Simulator

TS-102Simulator


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Test

LCT-01 Tedea Load cell testerA technician’s best friend when having to test load cells whether installed or removed.fully computerized and battery operated. Alphanumeric LCD display guides the operatorthrough all test stages and clearly displays the results. Buzzer and LED will alert the userto any suspicious result.Test 4 and 6 wire load cells. Up to 8K bridge resistance. Up to 5 mv/V.Unit will display resistance of input, output, sense, shield, ground.Load cell output as percent of full scale.2.5 VDC excitation, 12 bit A/D resolution. 2% accuracy.Part Number Weight Stock Price BLCT-01 Tedea Load cell tester 4 lb 6450 $ 655.00

LCT-01Load cell tester

TS-350 & DTR-304Service parts only.Part Number Weight Stock Price CService PartsReplacement case 1 lb 81 35.00

TS-8V Transducer SimulatorABS plastic case with lid. Face plate 1/8” aluminum. Fixed rotary switch: -0.5, 0, 0.5, 1.0,1.5, 2.0, 2.5, 3.0 mv/v in 8 steps. 10 turn potentiometer for adjusting dead load andadjustment between steps. 4 banana jacks (red, black, green, white) color coded. In/outswitch for 10 turn potentiometer. Excitation voltage up to 20 VDC/VAC.Part Number Weight Stock Price CTS-8V Simulator 1 lb 2407 $ 449.00

Service PartsReplacement Case 1 lb 81 35.00

TS-8VSimulator

NEWNEW





Components

Test

TS-16V

TS-16

TS-0V

TS-6

Transducer SimulatorSimulators are used to test indicators by temporarily substituting for the load cell. Theindicator can be checked that it works correctly at various loads. The switches andpotentiometers on the transducer simulator are set to the desired output signal. Theindicator should display a weight that corresponds to the settings on the simulator.

The simulators with “V” in the part number have a Variable potentiometer for smoothlysetting the output between steps of the multiple position switch.

The simulators with variable potentiometers can be used to check set point relayoperation on indicators used with batching systems.

The range of the simulator is 0 to 2 mv/V or 0 to 3 mv/V depending in the model selected.The excitation voltage can be from 0 to 20 VDC or VAC.Wires terminate at screw type binding posts. ABS thermoplastic case.Part Number Size Weight Stock Price CTS-0V Simulator, 0-3mv/V 3”x2”x2.25”H 1 lb 2449 $ 109.00

Variable 10 turn potentiometerNo switch

TS-6 Simulator, 0-2 mv/V 3”x2”x2.25”H 1 lb 2451 242.006 position switch0.0, 0.4, 0.8, 1.2, 1.6, 2.0 mv/VNo potentiometer

TS-7 Simulator, 0-3 mv/V 3”x2”x2.25”H 1 lb 3566 261.007 position switch0.0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 mv/V

TS-16 Simulator, 0-3 mv/V 5”x3”x3.12”H 2 lb 2452 491.0016 position switch0.0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2, 2.4, 2.6, 2.8, 3.0 mv/VNo potentiometer

TS-16V Simulator, 0-3 mv/V 6”x3”x2.75”H 2 lb 2453 589.0016 position switch0.0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2, 2.4, 2.6, 2.8, 3.0 mv/VVariable 10 turn potentiometer for setting between steps.

TS-7


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Weights

WC-1000A

WC-500

NT-500

Test Weight Hand TruckEasily move your 50 lb test weights with this rugged, heavy duty hand truck. Two stacksof weights, (5) in a stack for (10) weights total. This truck makes transporting weightsquicker than before. No need to load or unload the hand truck. Just position the truckbehind the stacks and the special gripper will pick up the handles of the bottom weights.Move to the new location and back the truck away from the two stacks. Painted steel.26” wide, 46.5” high.Part Number Capacity Weight Stock Price CWC-500 Hand Cart 500 lb 55 lb 4137 $ 508.00

Price for Weight hand truck is FOB Factory

Test Weight TreeEasily test hopper scales with 50 lb test weights. The weight tree will hang from thehopper with the built in lifting eye. Up to (10) 50 lb test weights can be hung on thebranches of the tree. Painted steel.Part Number Capacity Weight Stock Price CNT-500 Weight tree 1,000 lb 40 lb 6195 $ 319.00

Price for Weight hand cart is FOB Factory

Test Weight Hand CartEasily move your 1,000 lb test weights with this rugged, heavy duty hand cart. Move oneweight at a time. Each cart has one hook. Custom hooks for other size weights areavailable.1,000 lb cart has two hooks, one for 1,000 lb and the other for 500 lb 35.5” wide, 75”handle2,000 lb cart has one hook. 38.5” wide, 85” handle.These carts make transporting weights quicker than ever before. The long handles giveample leverage to easily lift heavy weights Painted steel.Part Number Capacity Weight Stock Price CWC-1000A Weight Carriage 1,000 lb 75 lb 2458 $ 744.00WC-2000 Weight Carriage 2,000 lb 125 lb 3788 $ 995.00

Price for Weight hand cart is FOB Factory


Weights




Components

Selecting the proper weight certificationStatement of Accuracy is provided with each weight of weight set ordered without a calibration certificate. It verifiesthat the weight has been manufactured to meet all specifications for its class and has been calibrated using standardstraceable to NIST. Note: There is no NIST traceability supplied with this statement. Not suitable for quality orregulatory requirements.

Traceable Calibration Certificate is designed for those laboratories and companies that require NIST traceability butare not required to meet any stringent audit or regulatory requirements.

NIST/NVLAP Weight Calibration Certificate - our most detailed certificate designed to meet your most stringentregulatory and quality control needs including all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL, Z540-1 and Nuclearrequirements. All procedures and processes used to generate this multi page certificate as well as its format andcontent are prescribed by the NIST administered National Voluntary Laboratory Accreditation Program.

The document contains: customer name, address, date of calibration, equipment and standards used in calibration,accuracy class, true mass (mass in a vacuum), “as found” mass correction (for recalibration), “as left” mass correctionsfor each weight, uncertainty of measurement process for each weight, environmental conditions during test, constructionand density of weights, calibration procedures used, statement of traceability to NIST and a helpful list of terms anddefinitions.

Selecting the proper weight classAccuracy Classes

Extra Fine UseANSI/ASTM Class 0 Calibrate weights andTroemner Ultra ClassTM special precision analyticalANSI/ASTM Class 1 balances, NTEP Class I

Fine UseANSI/ASTM Class 2 Calibrate NTEP Class II balances

ANSI/ASTM Class 3 Working standards forprecision and analytical work.External weights to calibrate .moderate precision balances

Medium UseANSI/ASTM Class 4 Calibrate NTEP Class III scales,ANSI/ASTM Class 5 dial scales, trip balancesANSI/ASTM Class 6 platform scales includingNIST Class F NTEP class IIIL and IV

NIST Class F specifications and tolerances are in NIST Handbook105-1.These specifications and tolerances are intended to set forth minimumrequirements used:1. In the field by state and local weights and measures officials in theexamination of weighing and measuring devices used in commerce.2. By device installers and servicemen.3. As reference standards in state weights and measures laboratories.4. In industrial, educational and research laboratiores.

Federal Grain Inspection Service approved laboratory.

ANSI - American National Standards InstituteASTM - American Society for Testing and MaterialsNIST - National Institute of Standards and TechnologyNTEP - Nation Type Evaluation ProgramOIML - Organization International Metrological Legal

Troemner Calibration Weights and Weight SetsFor over 160 years, Troemner has provided an extensive selection of precision weights and calibration services. TodayTroemner is an ISO 9001 registered company and one of the world’s leading suppliers of precision weights and massstandards. We manufacture and certify weights to meet or exceed the highest tolerance standards of the NationalInstitute of Standards & Technology (NIST), the American Society for Testing & Materials (ASTM) and the InternationalOrganization of Legal Metrology (OIML).


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Weights



Components

Stainless SteelGrip handle

MetricIndividual stainless steel weights NIST Class “F”Grip handle stainless steel weight with Statement of AccuracyPart No. Weight Diameter Height Ship Wt Stock Price C1370 5 kg 4.98” 3.08” 12 lb 4998 $ 256.001371 8 kg 4.98” 4.27” 19 lb 4999 414.001372 10 kg 4.98” 5.09” 21 lb 5000 437.00

1373 16 kg 5.98” 5.20” 36 lb 5001 592.001374 20 kg 5.98” 6.31” 46 lb 5002 605.001375 24 kg 5.98” 7.69” 55 lb 5003 745.00

1376 25 kg 5.98” 7.70” 57 lb 5004 718.001378 30 kg 5.98” 9.06” 68 lb 5005 895.00

Grip handle stainless steel weight with Traceable CertificatePart No. Weight Diameter Height Ship Wt Stock Price C1370T 5 kg 4.98” 3.08” 12 lb 5006 $ 277.001371T 8 kg 4.98” 4.27” 19 lb 5007 447.001372T 10 kg 4.98” 5.09” 21 lb 5008 473.00

1373T 16 kg 5.98” 5.20” 36 lb 5009 653.001374T 20 kg 5.98” 6.31” 46 lb 5010 665.001375T 24 kg 5.98” 7.69” 55 lb 5011 831.00

1376T 25 kg 5.98” 7.70” 57 lb 5012 745.001378T 30 kg 5.98” 9.06” 68 lb 5013 957.00

Grip handle stainless steel weight with NVLAP CertificatePart No. Weight Diameter Height Ship Wt Stock Price C1370W 5 kg 4.98” 3.08” 12 lb 5014 $ 344.001371W 8 kg 4.98” 4.27” 19 lb 5015 498.001372W 10 kg 4.98” 5.09” 21 lb 5016 514.00

1373W 16 kg 5.98” 5.20” 36 lb 5017 712.001374W 20 kg 5.98” 6.31” 46 lb 5018 718.001375W 24 kg 5.98” 7.69” 55 lb 5019 896.00

1376W 25 kg 5.98” 7.70” 57 lb 5020 846.001378W 30 kg 5.98” 9.06” 68 lb 5021 995.00


Weights




Components

Stainless SteelGrip handle

AvoirdupoisIndividual stainless steel weights NIST Class “F”Grip handle stainless steel weight with Statement of AccuracyPart No. Weight Diameter Height Ship Wt Stock Price C1270 10 lb 4.98” 2.90” 11 lb 5022 $ 256.001272 20 lb 4.98” 4.72” 21 lb 5023 419.001274 25 lb 5.98” 3.90” 26 lb 5024 463.00

1275 30 lb 5.98” 4.52” 32 lb 5025 547.001276 50 lb 5.98” 7.05” 52 lb 5026 697.00

Grip handle stainless steel weight with Traceable CertificatePart No. Weight Diameter Height Ship Wt Stock Price C1270T 10 lb 4.98” 2.90” 11 lb 5027 $ 349.001272T 20 lb 4.98” 4.72” 21 lb 5028 447.001274T 25 lb 5.98” 3.90” 26 lb 5029 500.00

1275T 30 lb 5.98” 4.52” 32 lb 5030 576.001276T 50 lb 5.98” 7.05” 52 lb 5031 732.00

Grip handle stainless steel weight with NVLAP CertificatePart No. Weight Diameter Height Ship Wt Stock Price C1270W 10 lb 4.98” 2.90” 11 lb 5032 $ 436.001272W 20 lb 4.98” 4.72” 21 lb 5033 512.001274W 25 lb 5.98” 3.90” 26 lb 5034 563.00

1275W 30 lb 5.98” 4.52” 32 lb 5035 634.001276W 50 lb 5.98” 7.05” 52 lb 5036 885.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Weights



Components

MetricCast IronWeights

NIST Class “F” specifications and tolerances arelisted in NIST Handbook 105-1.These specifications and tolerances areintended to set forth minimum requirementsused:1. In the field by state and local weights andmeasures officials in the examination ofweighing and measuring devices used incommerce.2. By device installers and servicemen.3. As reference standards in state weights andmeasures laboratories.4. In industrial, educational and researchlaboratiores.

Federal Grain Inspection Service approvedlaboratory.

Heavy Capacity & Grip Handle Cast Iron Test WeightsNIST Class “F”

MetricGrip handle cast iron weight with Statement of AccuracyPart # Weight Width Length Height Ship Wt Stock Price B59280 * 5 kg 3-1/4” 5-3/8” 3-7/8” 12 lb 821 $ 62.009282 10 kg 4-5/8” 6-3/16” 5” 23 lb 820 81.00

9284 20 kg 5-1/2” 7-5/8” 5-7/8” 45 lb 819 119.009286 25 kg 5-9/16” 7-3/4” 6-3/4” 54 lb 818 158.00

A9288 50 kg 7-5/16” 9” 8-1/4” 113 lb 817 580.009289 100 kg 9-1/2” 9-1/2” 10-1/2” 225 lb 816 1,196.009290 200 kg 12-3/4” 12-1/4” 12” 450 lb 815 1,378.00

9291 250 kg 12-3/4” 12-1/4” 14-3/4” 540 lb 814 1,539.009292 500 kg 14-3/4” 14-5/8” 20-3/4” 1,125 lb 813 2,782.009294 1,000 kg 20-5/8” 20-1/4” 21-5/8” 2,250 lb 812 6,136.00Grip handle cast iron weight with Traceable CertificatePart # Weight Width Length Height Ship Wt Stock Price C9280T * 5 kg 3-1/4” 5-3/8” 3-7/8” 12 lb 5037 $ 100.009282T 10 kg 4-5/8” 6-3/16” 5” 23 lb 5038 125.00

9284T 20 kg 5-1/2” 7-5/8” 5-7/8” 45 lb 5039 162.009286T 25 kg 5-9/16” 7-3/4” 6-3/4” 54 lb 5040 202.00

A9288T 50 kg 7-5/16” 9” 8-1/4” 113 lb 5041 640.009289T 100 kg 9-1/2” 9-1/2” 10-1/2” 225 lb 5042 1,321.009290T 200 kg 12-3/4” 12-1/4” 12” 450 lb 5043 1,503.00

9291T 250 kg 12-3/4” 12-1/4” 14-3/4” 540 lb 5044 1,644.009292T 500 kg 14-3/4” 14-5/8” 20-3/4” 1,125 lb 5045 2,907.009294T 1,000 kg 20-5/8” 20-1/4” 21-5/8” 2,250 lb 5046 6,292.00Grip handle cast iron weight with NVLAP CertificatePart # Weight Width Length Height Ship Wt Stock Price C9280W * 5 kg 3-1/4” 5-3/8” 3-7/8” 12 lb 5047 $ 125.009282W 10 kg 4-5/8” 6-3/16” 5” 23 lb 5048 159.00

9284W 20 kg 5-1/2” 7-5/8” 5-7/8” 45 lb 5049 197.009286W 25 kg 5-9/16” 7-3/4” 6-3/4” 54 lb 5050 236.00

A9288W 50 kg 7-5/16” 9” 8-1/4” 113 lb 5051 679.009289W 100 kg 9-1/2” 9-1/2” 10-1/2” 225 lb 5052 1,404.009290W 200 kg 12-3/4” 12-1/4” 12” 450 lb 5053 1,586.00

9291W 250 kg 12-3/4” 12-1/4” 14-3/4” 540 lb 5054 1,747.009292W 500 kg 14-3/4” 14-5/8” 20-3/4” 1,125 lb 5055 2,990.009294W 1,000 kg 20-5/8” 20-1/4” 21-5/8” 2,250 lb 5056 6,396.00* Not for Legal for Trade applications.NIST HB105-1 2. Finish 2.2“A weight 5 kg/10 lb or less shall not have a surface coating.”

For Legal for Trade weights 5kg and below, refer to Class F stainless steel weights.


Weights




Components

AvoirdupoisCast IronWeights

NIST Class “F” specifications and tolerances arelisted in NIST Handbook 105-1.These specifications and tolerances areintended to set forth minimum requirementsused:1. In the field by state and local weights andmeasures officials in the examination ofweighing and measuring devices used incommerce.2. By device installers and servicemen.3. As reference standards in state weights andmeasures laboratories.4. In industrial, educational and researchlaboratories.

Federal Grain Inspection Service approvedlaboratory.

Heavy Capacity & Grip Handle Cast Iron Test WeightsNIST Class “F”

AvoirdupoisGrip handle cast iron weight with Statement of AccuracyPart # Weight Width Length Height Ship Wt Stock Price B59072 * 5 lb 2-3/8” 3-7/8” 3-1/8” 6 lb 811 $ 51.009074 * 10 lb 3-1/4” 5-3/8” 3-9/16” 11 lb 810 71.00

9076 20 lb 4” 6-3/16” 5” 21 lb 809 78.009078 25 lb 4-3/4” 6-3/16” 5” 26 lb 808 102.009080 50 lb 5-9/16” 8” 6-3/8” 51 lb 807 129.00

A9082 100 lb 7-3/8” 9-1/8” 7-9/16” 101 lb 806 619.009083 200 lb 9-9/16” 9-3/16” 9-13/16” 200 lb 805 1,170.009084 500 lb 12-3/4” 12-3/8” 13-1/2” 500 lb 804 1,628.009086 1,000 lb 14-3/4” 14-5/8” 19” 1,000 lb 803 2,470.00

9087 2,000 lb 20-3/8” 20-5/8” 19-7/8” 2,000 lb 802 5,954.009088 2,500 lb 20-3/8” 20-3/8” 24-1/2” 2,500 lb 801 6,994.009090 3,000 lb 20-3/16” 20-5/16” 29-1/2” 3,000 lb 800 7,608.009092 5,000 lb 27” 27” 30” 5,000 lb 799 12,766.00Grip handle cast iron weight with Traceable CertificatePart # Weight Width Length Height Ship Wt Stock Price C9072T * 5 lb 2-3/8” 3-7/8” 3-1/8” 6 lb 5057 $ 88.009074T * 10 lb 3-1/4” 5-3/8” 3-9/16” 11 lb 5058 100.00

9076T 20 lb 4” 6-3/16” 5” 21 lb 5059 122.009078T 25 lb 4-3/4” 6-3/16” 5” 26 lb 5060 149.009080T 50 lb 5-9/16” 8” 6-3/8” 51 lb 5061 176.00

A9082T 100 lb 7-3/8” 9-1/8” 7-9/16” 101 lb 5062 667.009083T 200 lb 9-9/16” 9-3/16” 9-13/16” 200 lb 5063 1,295.009084T 500 lb 12-3/4” 12-3/8” 13-1/2” 500 lb 5064 1,752.009086T 1,000 lb 14-3/4” 14-5/8” 19” 1,000 lb 5065 2,595.00

9087T 2,000 lb 20-3/8” 20-5/8” 19-7/8” 2,000 lb 5066 6,110.009088T 2,500 lb 20-3/8” 20-3/8” 24-1/2” 2,500 lb 5067 7,197.009090T 3,000 lb 20-3/16” 20-5/16” 29-1/2” 3,000 lb 5068 7,793.009092T 5,000 lb 27” 27” 30” 5,000 lb 5069 13,234.00Grip handle cast iron weight with NVLAP CertificatePart # Weight Width Length Height Ship Wt Stock Price B59072W * 5 lb 2-3/8” 3-7/8” 3-1/8” 6 lb 5070 $ 113.009074W * 10 lb 3-1/4” 5-3/8” 3-9/16” 11 lb 5071 133.00

9076W 20 lb 4” 6-3/16” 5” 21 lb 5072 151.009078W 25 lb 4-3/4” 6-3/16” 5” 26 lb 5073 151.009080W 50 lb 5-9/16” 8” 6-3/8” 51 lb 5074 207.00

A9082W 100 lb 7-3/8” 9-1/8” 7-9/16” 101 lb 5075 718.009083W 200 lb 9-9/16” 9-3/16” 9-13/16” 200 lb 5076 1,378.009084W 500 lb 12-3/4” 12-3/8” 13-1/2” 500 lb 5077 1,836.009086W 1,000 lb 14-3/4” 14-5/8” 19” 1,000 lb 5078 2,678.00

9087W 2,000 lb 20-3/8” 20-5/8” 19-7/8” 2,000 lb 5079 6,214.009088W 2,500 lb 20-3/8” 20-3/8” 24-1/2” 2,500 lb 5080 7,332.009090W 3,000 lb 20-3/16” 20-5/16” 29-1/2” 3,000 lb 5081 8,388.009092W 5,000 lb 27” 27” 30” 5,000 lb 5082 13,546.00* Not for Legal for Trade applications.NIST HB105-1 2. Finish 2.2“A weight 5 kg/10 lb or less shall not have a surface coating.”

For Legal for Trade weights 10 lb and below, refer to Class F stainless steel weights.


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Weights



Components

Stainless Steel Individual Weights

MetricIndividual stainless steel weights NIST Class “F”Cylindrical stainless steel satin finish with Statement of AccuracyPart No. Weight Diameter Height Ship Wt Stock Price C1334 1 g 0.20” 0.24” 1 lb 1436 $ 22.001332 2 g 0.28” 0.29” 1 lb 1435 22.001328 5 g 0.37” 0.38” 1 lb 1434 22.00

1326 10 g 0.42” 0.57” 1 lb 1433 28.001324 20 g 0.59” 0.60” 1 lb 1432 28.001320 50 g 0.74” 0.90” 1 lb 1431 30.00

1318 100 g 0.99” 1.03” 1 lb 1430 35.001316 200 g 1.24” 1.36” 1 lb 1429 38.001312 500 g 1.48” 2.35” 2 lb 1428 54.00

1310 1,000 g 1.84” 2.98” 3 lb 1427 61.001308 2,000 g 2.48” 3.32” 5 lb 1426 106.001302 5,000 g 3.20” 4.90” 12 lb 1425 178.00

Cylindrical stainless steel satin finish with Traceable CertificatePart No. Weight Diameter Height Ship Wt Stock Price C1334T 1 g 0.20” 0.24” 1 lb 5083 $66.001332T 2 g 0.28” 0.29” 1 lb 5084 66.001328T 5 g 0.37” 0.38” 1 lb 5085 66.00

1326T 10 g 0.42” 0.57” 1 lb 5086 70.001324T 20 g 0.59” 0.60” 1 lb 5087 70.001320T 50 g 0.74” 0.90” 1 lb 5088 71.00

1318T 100 g 0.99” 1.03” 1 lb 5089 74.001316T 200 g 1.24” 1.36” 1 lb 5090 83.001312T 500 g 1.48” 2.35” 2 lb 5091 115.00

1310T 1,000 g 1.84” 2.98” 3 lb 5092 122.001308T 2,000 g 2.48” 3.32” 5 lb 5093 157.001302T 5,000 g 3.20” 4.90” 12 lb 5094 212.00

Cylindrical stainless steel satin finish with NVLAP CertificatePart No. Weight Diameter Height Ship Wt Stock Price C1334W 1 g 0.20” 0.24” 1 lb 5095 $ 75.001332W 2 g 0.28” 0.29” 1 lb 5096 75.001328W 5 g 0.37” 0.38” 1 lb 5097 75.00

1326W 10 g 0.42” 0.57” 1 lb 5098 83.001324W 20 g 0.59” 0.60” 1 lb 5099 83.001320W 50 g 0.74” 0.90” 1 lb 5100 89.00

1318W 100 g 0.99” 1.03” 1 lb 5101 89.001316W 200 g 1.24” 1.36” 1 lb 5102 102.001312W 500 g 1.48” 2.35” 2 lb 5103 140.00

1310W 1,000 g 1.84” 2.98” 3 lb 5104 147.001308W 2,000 g 2.48” 3.32” 5 lb 5105 191.001302W 5,000 g 3.20” 4.90” 12 lb 5106 262.00


Weights




Components

Stainless Steel Individual Weights

AvoirdupoisIndividual stainless steel weights NIST Class “F”Cylindrical stainless steel satin finish with Statement of AccuracyPart No. Weight Diameter Height Ship Wt Stock Price C1222 1/2 oz 0.50” 0.58” 1 lb 839 $ 29.001220 1 oz 0.61” 0.78” 1 lb 838 29.001217 2 oz 0.87” 0.90” 1 lb 837 32.00

1215 4 oz 0.99” 1.16” 1 lb 836 36.001213 8 oz 1.23” 1.55” 1 lb 835 40.001211 1 lb 1.48” 2.16” 1 lb 834 50.00

1209 2 lb 1.84” 2.71” 3 lb 833 69.001203 5 lb 2.48” 3.75” 6 lb 832 113.001201 10 lb 3.22” 4.42” 11 lb 831 174.00

Cylindrical stainless steel satin finish with Traceable CertificatePart No. Weight Diameter Height Ship Wt Stock Price C1222T 1/2 oz 0.50” 0.58” 1 lb 5107 $ 74.001220T 1 oz 0.61” 0.78” 1 lb 5108 74.001217T 2 oz 0.87” 0.90” 1 lb 5109 76.00

1215T 4 oz 0.99” 1.16” 1 lb 5110 78.001213T 8 oz 1.23” 1.55” 1 lb 5111 81.001211T 1 lb 1.48” 2.16” 1 lb 5112 123.00

1209T 2 lb 1.84” 2.71” 3 lb 5113 135.001203T 5 lb 2.48” 3.75” 6 lb 5114 172.001201T 10 lb 3.22” 4.42” 11 lb 5115 220.00

Cylindrical stainless steel satin finish with NVLAP CertificatePart No. Weight Diameter Height Ship Wt Stock Price C1222W 1/2 oz 0.50” 0.58” 1 lb 5116 $ 89.001220W 1 oz 0.61” 0.78” 1 lb 5117 89.001217W 2 oz 0.87” 0.90” 1 lb 5118 93.00

1215W 4 oz 0.99” 1.16” 1 lb 5119 94.001213W 8 oz 1.23” 1.55” 1 lb 5120 102.001211W 1 lb 1.48” 2.16” 1 lb 5121 152.00

1209W 2 lb 1.84” 2.71” 3 lb 5122 166.001203W 5 lb 2.48” 3.75” 6 lb 5123 210.001201W 10 lb 3.22” 4.42” 11 lb 5124 269.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Weights



Components

TW-5000-01 set(1) TW-100-01 set(2) 200g(1) 500g(1) 1,000g(2) 2,000g(1) 5,000gTotal 11,111.11g14-1/2” x 9-1/4” x 8-1/4”h

TW-100-01 set(1) 1mg(2) 2mg(1) 5mg(1) 10mg(2) 20mg(1) 50mg(1) 100mg(2) 200mg(1) 500mg(1) 1g(2) 2g(1) 5g(1) 10g(2) 20g(1) 50g(1) 100gTotal 211.11g4” x 2-7/8” x 1-1/4”h

Troemner Test Weights are the highest quality available. They are backed by a reputationknown throughout the industry. Troemner has years of experience in making precisionweights. NIST Class “F” satin finish stainless steel. Heavy duty rugged case with steelreinforced corners. Foam insert keeps weights in place. Small weights are in a smallerleatherette case inside the large case.

Metric NIST Class “F”Statement of AccuracyWeight Set Weight Stock Price CTW-100-01 2 lb 824 $ 204.00TW-5000-01 31 lb 827 660.00

Traceable CertificateWeight Set Weight Stock Price CTW-100-01T 2 lb 5125 $ 318.00TW-5000-01T 31 lb 5126 755.00

NVLAP CertificateWeight Set Weight Stock Price CTW-100-01W 2 lb 5127 $ 394.00TW-5000-01W 31 lb 5128 920.00


Weights




Components

TW-50COMBO Combination set(1) TW-15D set(1) TW-30F set(1) 8 oz(5) 1 lb(5) 5 lbTotal 31.61 lb14-1/2”x9-1/4”x8-1/4”h

TW-50D Decimal set(1) TW-15D set(1) 0.5 lb(5) 1 lb(5) 5 lbTotal 31.11 lb14-1/2”x9-1/4”x8-1/4”h

TW-50 Fraction set(1) TW-30 set(1) 8 oz(5) 1 lb(5) 5 lbTotal 31 lb14-1/2”x9-1/4”x8-1/4”h

TW-15 Decimal set(1) 0.001 lb(2) 0.002 lb(1) 0.005 lb(1) 0.01 lb(2) 0.02 lb(1) 0.05 lb(1) 0.1 lb(2) 0.2 lbTotal 0.610 lb4”x2-7/8”x1-1/4”

TW-30 Fraction set(2) 1/32 oz(1) 1/16 oz(1) 1/8 oz(1) 1/4 oz(1) 1/2 oz(1) 1 oz(1) 2 oz(1) 4 ozTotal 8 oz4-1/4”x2-1/4”x1-1/4”h

Troemner Test Weights are the highest quality available. They are backed by a reputationknown throughout the industry. Troemner has years of experience in making precisionweights. NIST Class “F” satin finish stainless steel. Heavy duty rugged case with steelreinforced corners. Foam insert keeps weights in place. Small weights are in a smallerleatherette case inside the large case.

Avoirdupois NIST Class “F”Statement of AccuracyWeight Set Total Weight Stock Price CTW-15 Decimal set 0.61 lb 1 lb 276 $ 176.00TW-30 Fraction set 8 oz 1 lb 828 164.00

TW-50 Fraction set 31.00 lb 38 lb 829 875.00TW-50D Decimal set 31.11 lb 38 lb 277 888.00TW-50COMBO Combination 31.61 lb 39 lb 830 899.00

Fraction & Decimal set

Traceable CertificateWeight Set Total Weight Stock Price CTW-15T Decimal set 0.61 lb 1 lb 5129 $ 286.00TW-30T Fraction set 8 oz 1 lb 5130 270.00

TW-50T Fraction set 31.00 lb 38 lb 5132 1,161.00TW-50DT Decimal set 31.11 lb 38 lb 5131 1,160.00TW-50COMBOT Combination 31.61 lb 39 lb 5133 1,181.00


NVLAP CertificateWeight Set Total Weight Stock Price CTW-15W Decimal set 0.61 lb 1 lb 5134 $ 366.00TW-30W Fraction set 8 oz 1 lb 5135 458.00

TW-50W Fraction set 31.00 lb 38 lb 5137 1,363.00TW-50DW Decimal set 31.11 lb 38 lb 5136 1,376.00TW-50COMBOW Combination 31.61 lb 39 lb 5138 1,389.00



Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Weights

Calibration weightsGrip handle and Cylindrical

Optional case and glove

Optional cases

Electronic Balance Calibration WeightsStackable grip handle and cylindrical stainless steel weights for calibration and adjustmentof all electronic balances and scales. Constructed of highly polished stainless steel.Made in strict accordance with standard specifications for laboratory weights and precisionmass standards ANSI/ASTM E617.Weights from 10g thru 5kg include a glove and a hinged carrying case with foam interior.Optional cases and gloves are available for weights 8 kg thru 30 kg.Also available in ASTM Class 2, 3 and 4 as well as Troemner Ultra Class.Statement of Accuracy will come with Troemner weights. It verifies that the weight hasbeen manufactured to meet all specifications for its class and has been calibrated usingstandards traceable to NIST. Note: There is no NIST traceability supplied with thisstatement. Not suitable for quality or regulatory requirementsASTM Class 1Part # Weight Ship Wt Stock Price B8158 10 g cyl 1 lb 1345 $ 54.008156 20 g cyl 1 lb 1344 54.008154 30 g cyl 1 lb 1343 54.00

8153 40 g cyl 1 lb 1342 54.008152 50 g cyl 1 lb 1341 54.008150 60 g cyl 1 lb 1340 59.00




8130 600 g cyl 2 lb 1330 116.008128 1,000 g cyl 5 lb 1329 123.008126 1,500 g cyl 6 lb 1328 141.00

8124 2 kg cyl 7 lb 1327 154.008122 3 kg cyl 9 lb 1326 227.008120 4 kg cyl 11 lb 1325 293.00

8118 4 kg grip 11 lb 1324 500.008116 5 kg cyl 13 lb 1323 343.008114 5 kg grip 13 lb 1322 539.00

8112 8 kg grip 19.lb 1321 713.008110 10 kg grip 24 lb 1320 739.008108 16 kg grip 36 lb 1319 1,033.00

8106 20 kg grip 48 lb 1318 1,108.008104 24 kg grip 53 lb 1317 1,290.00

8102 25 kg grip 58 lb 1316 1,329.008100 30 kg grip 68 lb 1315 1,557.00





Weights

Calibration weightsGrip handle and

Cylindrical

Optional cases


Components

Electronic Balance Calibration WeightsStackable grip handle and cylindrical stainless steel weights for calibration and adjustmentof all electronic balances and scales. Constructed of highly polished stainless steel.Made in strict accordance with standard specifications for laboratory weights and precisionmass standards ANSI/ASTM E617.Weights from 10g thru 5kg include a glove and a hinged carrying case with foam interior.Optional cases and gloves are available for weights 8 kg thru 30 kg.Also available in ASTM Class 2, 3 and 4 as well as Troemner Ultra Class.Traceable Certificate will certify that the weights are proven as tested against thestandard. Certificate is a computer printout including test information.ASTM Class 1Part # Weight Ship Wt Stock Price B8158T 10 g cyl 1 lb 1376 $ 81.008156T 20 g cyl 1 lb 1375 81.008154T 30 g cyl 1 lb 1374 81.00

8153T 40 g cyl 1 lb 1373 81.008152T 50 g cyl 1 lb 1372 81.008150T 60 g cyl 1 lb 1371 98.00




8130T 600 g cyl 2 lb 1361 159.008128T 1,000 g cyl 5 lb 1360 163.008126T 1,500 g cyl 6 lb 1359 209.00

8124T 2 kg cyl 7 lb 1358 207.008122T 3 kg cyl 9 lb 1357 290.008120T 4 kg cyl 11 lb 1356 364.00

8118T 4 kg grip 11 lb 1355 539.008116T 5 kg cyl 13 lb 1354 390.008114T 5 kg grip 13 lb 1353 591.00

8112T 8 kg grip 19.lb 1352 767.008110T 10 kg grip 24 lb 1351 833.008108T 16 kg grip 36 lb 1350 1,097.00

8106T 20 kg grip 48 lb 1349 1,210.008104T 24 kg grip 53 lb 1348 1,395.00

8102T 25 kg grip 58 lb 1347 1,425.008100T 30 kg grip 68 lb 1346 1,742.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Weights


Calibration weightsGrip handle and Cylindrical

Optional cases

Electronic Balance Calibration WeightsStackable grip handle and cylindrical stainless steel weights for calibration and adjustmentof all electronic balances and scales. Constructed of highly polished stainless steel.Made in strict accordance with standard specifications for laboratory weights and precisionmass standards ANSI/ASTM E617.Weights from 10g thru 5kg include a glove and a hinged carrying case with foam interior.Optional cases and gloves are available for weights 8 kg thru 30 kg.Also available in ASTM Class 2, 3 and 4 as well as Troemner Ultra Class.NVLAP Certificate will include the Traceable Certificate statements plus all the readingsof calibration.ASTM Class 1Part # Weight Ship Wt Stock Price B8158W 10 g cyl 1 lb 5139 $ 124.008156W 20 g cyl 1 lb 5140 124.008154W 30 g cyl 1 lb 5141 124.00

8153W 40 g cyl 1 lb 5142 124.008152W 50 g cyl 1 lb 5143 124.008150W 60 g cyl 1 lb 5144 124.00




8130W 600 g cyl 2 lb 5154 216.008128W 1,000 g cyl 5 lb 5155 208.008126W 1,500 g cyl 6 lb 5156 267.00

8124W 2 kg cyl 7 lb 5157 258.008122W 3 kg cyl 9 lb 5158 357.008120W 4 kg cyl 11 lb 5159 424.00

8118W 4 kg grip 11 lb 5160 640.008116W 5 kg cyl 13 lb 5161 460.008114W 5 kg grip 13 lb 5162 674.00

8112W 8 kg grip 19.lb 5163 829.008110W 10 kg grip 24 lb 5164 876.008108W 16 kg grip 36 lb 5165 1,138.00

8106W 20 kg grip 48 lb 5166 1,245.008104W 24 kg grip 53 lb 5167 1,418.00

8102W 25 kg grip 58 lb 5168 1,476.008100W 30 kg grip 68 lb 5169 1,847.00





Weights

7228

7221

Components

Analytical Weight SetsAlloy 8 material for Precision Analytical Weights

Designed for your most precise weighing needs, Troemner’s Precision AnalyticalReference Weights and Weight Sets utilize a specially developed austenitic stainlesssteel, Alloy 8, available exclusively from Troemner. Alloy 8 is similar to the materialoriginally specified for the state primary standards. Alloy 8 possesses closely controlleddensity, extremely low magnetic susceptibility, excellent stability and resistance tocorrosion, assuring a very stable mass over time.

Weights 1g to 1kg are manufactured using Alloy 8 and come in cylindrical shapes withknobs on top for easy handling. Weights from 1mg to 30mg are aluminum and flat, withone side turned up to form a handle for non slip gripping with forceps. Weights from50mg to 500mg are stainless steel and flat with one side turned up to form a handle.Weight sets 200g and above are supplied in oak cases while weight sets below 200g aresupplied in strong polypropylene cases. All weight sets are marked with serial number,accuracy class and date of calibration. Forceps are included

Weight sets are designed to achieve any total mass by combining smaller masses.Weight sets are supplied in a 5-2-2-1 series meaning that weights beginning with a 2 aredoubled in each decade and weights beginning with a 5 or 1 are single in each decade.The exception applies when a set begins with a 2. In that case the first weight is single,unless otherwise noted, and the remaining 2’s in the set are doubled in each decade.

Weight set with Statement of AccuracyPart # Weight Set Class Weight Stock Price B7228-1 100 g x 1 mg ANSI/ASTM Class 1 2 lb 1377 $ 872.007228-3 100 g x 1 mg ANSI/ASTM Class 3 2 lb 1378 658.007228-4 100 g x 1 mg ANSI/ASTM Class 4 2 lb 1379 441.00

7221-0 (2) 200 g x 1 mg Troemner Ultra Class 4 lb 5170 1,170.007221-1 (2) 200 g x 1 mg ANSI/ASTM Class 1 4 lb 5171 1,007.007221-4 (2) 200 g x 1 mg ANSI/ASTM Class 4 4 lb 5172 544.00

Weight set with Traceable CertificatePart # Weight Set Class Weight Stock Price B7228-1T 100 g x 1 mg ANSI/ASTM Class 1 2 lb 5173 $ 1,285.007228-3T 100 g x 1 mg ANSI/ASTM Class 3 2 lb 5174 954.007228-4T 100 g x 1 mg ANSI/ASTM Class 4 2 lb 5175 750.00

7221-0T (2) 200 g x 1 mg Troemner Ultra Class 4 lb 5176 1,765.007221-1T (2) 200 g x 1 mg ANSI/ASTM Class 1 4 lb 5739 1,620.007221-4T (2) 200 g x 1 mg ANSI/ASTM Class 4 4 lb 5740 888.00

Weight set with NVLAP CertificatePart # Weight Set Class Weight Stock Price B7228-1W 100 g x 1 mg ANSI/ASTM Class 1 2 lb 5177 $ 1,795.007228-3W 100 g x 1 mg ANSI/ASTM Class 3 2 lb 5178 1,464.007228-4W 100 g x 1 mg ANSI/ASTM Class 4 2 lb 5179 1,232.00

7221-0W (2) 200 g x 1 mg Troemner Ultra Class 4 lb 5738 2,402.007221-1W (2) 200 g x 1 mg ANSI/ASTM Class 1 4 lb 5180 2,073.007221-4W (2) 200 g x 1 mg ANSI/ASTM Class 4 4 lb 5181 1,389.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Weights

311-01

341

CRCC

Clean Room CasesThese see thru cases are made for clean room applications. They are approved for usein all clean room environments including Class 1. Constructed of clear acrylic withextruded aluminum edges and plated steel hardware. They are totally free of materialsthat may be potential sources of particulate generation. The inserts are either acrylic orpolypropylene. An added benefit is the ability to see which weights are in the casewithout opening it.Part No. Size Weight Stock Price B5CRCC1272 12-1/2”x7”x2-5/8”H 6 lb 5741 $ 262.00CRCC752 7”x5”x2-5/8”H 3 lb 5742 241.00CRCC754 7”x5”x4-1/2”H 4 lb 5743 241.00CRCC551 5”x5”x1-1/4”H 2 lb 5744 130.00

Metric gram mass sets - Brass#311-01 lacquered brass weights, bottle shape, one piece construction, ANSI/ASTM Class6 (Also meets OIML Class M2), 5-2-2-1 series. Milligram weights are aluminum andstainless steel. Covered box. Durable inert polypropylene with integral hinge. Milligramweights have individual compartments with clear cover. Forceps included.

#341 lacquered brass weights for school and industrial use. Weight set is reasonablypriced and accurate. Fractional weights are satin finished aluminum and grouped in onecompartment. Total capacity is 101 grams. ANSI/ASTM Class 6 (Also meets OIML ClassM2).Mass set with Statement of AccuracyPart No. Weight Set Weight Stock Price B5311-01 100 g x 1 mg 2 lb 1380 $ 65.80341 50 g x 10 mg 1 lb 1381 52.00

Mass set with Traceable CertificatePart No. Weight Set Weight Stock Price B5311-01T 100 g x 1 mg 2 lb 5182 $ 188.00341T 50 g x 10 mg 1 lb 5183 154.00





Weights

Brass Mass Cylindrical

Brass Mass Cylindrical

Brass Mass, Cylindrical, Pound/OunceIndividual cylindrical weights. OIML accuracy Class M-2. Polished brass.Part No Weight Stock Price C1/16 oz Brass mass 1 lb 219 $ 5.95

1/8 oz Brass mass 1 lb 252 5.951/4 oz Brass mass 1 lb 766 5.95

1/2 oz Brass mass 1 lb 1585 6.451 oz Brass mass 1 lb 1586 7.052 oz Brass mass 1 lb 1587 7.75

4 oz Brass mass 1 lb 1589 11.558 oz Brass mass 1 lb 1590 15.00

1 lb Brass mass 2 lb 1591 32.002 lb Brass mass 3 lb 1592 49.003 lb Brass mass 4 lb 792 68.95

4 lb Brass mass 5 lb 1594 82.505 lb Brass mass 6 lb 841 97.00

Components

Ohaus Brass Mass, Cylindrical, GramIndividual cylindrical weights. OIML accuracy Class M-2. Polished brass.Part No Weight Ship Wt Stock Price B551013-16 1g 1 lb 1075 $ 10.0051053-16 5g 1 lb 1077 10.00

51014-16 10g 1 lb 1078 10.0051024-16 20g 1 lb 1079 10.0051054-16 50g 1 lb 1080 11.00

51015-16 100g 1 lb 2705 12.0051025-16 200g 1 lb 2706M 17.0051055-16 500g 2 lb 2707 26.00

51016-16 1,000g 3 lb 2708 45.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

LOAD CELL . . . . . . . .5 VDC(1)350 ohm load cell(battery powered unit)(4)350 ohm load cells(AC powered unit)Remote sense for long cable runs


CONVERSION . . . . . .Update 10 times/sec3,000 display div (NTEP)

OUTPUT . . . . . . . . . . .RS232 output. Must use an approved barrierFiber optic RS232 or 4-20ma

KEYS . . . . . . . . . . . . .PRINT, CONV, ZERO, TARE, ON/RESTART

ANNUNCIATORS . . . .lb, kg, oz, NEG, MOT, ZERO, NET, BATT

DISPLAY . . . . . . . . . . .Red LED, 1” high2 line LCD text6 digit 999,999 displayDecimal point selectableDisplay div 1,2,5,10,20,50


POWER . . . . . . . . . . .120 VAC 50/60 Hz, 0.45 wattsBattery w/120VAC charger

SIZE . . . . . . . . . . . . . .10”W x 3”D x 6”H, 12 lb

SPECIFICATIONS

Hazardous

8000IS

8000IS Intrinsically Safe Weight Indicator - DoranFactory Mutual Approved for all classes, Divisions and Groups. Compact, self powered.Use with any scale base or strain gauge load cell. Safe area battery recharge. Batteryprovides 100 hours of use under continuous operation, or much longer if used in theSleep Mode. The battery pack is external and easy to remove to the safe area forrecharge. Keeping a spare battery on charge at all times will insure uninterruptedweighing. Popular features include digital averaging, auto zero tracking, auto sleep modeand motion detection. NEMA 4X stainless steel enclosure.NTEP 89-051A1 III/IIIL 3,000 divPart Number Weight Stock Price B58000IS Indicator w/(1)battery, charger 13 lb 2835 $ 1,840.008000ISAC Indicator AC powered w/power supply, 13 lb 2836 1,895.00

and 2 ft cable8000MIS Indicator only, battery powered 8 lb 2837 1,195.00

Service Parts A58000BIS Rechargeable battery 8 lb 2838 595.008000CIS Battery charger 3 lb 2839 245.00





SPECIFICATIONS

LOAD CELL . . . . . . . .5 VDC(1)350 ohm load cell(battery powered unit)(4)350 ohm load cells(AC powered unit)Remote sense for long cable runs


CONVERSION . . . . . .Update 10 times/sec3,000 display div (NTEP)

OUTPUT . . . . . . . . . . .RS232 output. Must use an approved barrierFiber optic RS232 or 4-20ma

KEYS . . . . . . . . . . . . .UNITS, GROSS/NET, TARE, F1, F2, ZERO,0-9, CLEAR, MENU.

ANNUNCIATORS . . . .lb, kg, oz, NEG, MOT, ZERO, NET, BATT.

DISPLAY . . . . . . . . . . .Red LED, 1” high2 line LCD text6 digit 999,999 displayDecimal point selectableDisplay div 1,2,5,10,20,50


POWER . . . . . . . . . . .120 VAC 50/60 Hz, 0.45 wattsBattery w/120VAC charger

SIZE . . . . . . . . . . . . . .10”W x 3”D x 6”H, 12 lb

Hazardous

9000XL/IS

Components

9000XL/IS Intrinsically Safe Weight Indicator - DoranFactory Mutual Approved for all classes, Divisions and Groups. Compact, self powered.Use with any scale base or strain gauge load cell. Safe area battery recharge. Batteryprovides 80 hours of use under continuous operation, or much longer if using the SleepMode. The battery pack is external and easy to remove to the safe area for recharge.Keeping a spare battery on charge at all times will insure uninterrupted weighing. Digitalaveraging, auto zero tracking, auto sleep mode and motion detection. Optional FiberOptic Interface to safe area 1,000 ft away. NEMA 4X stainless steel enclosure.NTEP 01-095 III 10,000 divPart Number Weight Stock Price B59000XL/IS Indicator w/(1)battery, charger 13 lb 5415 $ 2,095.009000XL/ISAC Indicator AC supply 13 lb 5416 2,095.00

Options A59XOPT41 Safe area digital I/O kit 1 lb 5417 695.009XOPT64 Electromechanical relay module 1 lb 5418 50.009XOPT47 4-20ma output (safe area only) 1 lb 5419 195.00

9XOPT49 Fiber optic interface w/50 ft cable (factory installed)1 lb 5420M 275.009XOPT51 Fiber optic converter for RS232 output (safe area) 1 lb 5421M 195.00Additional 50 ft fiber optic cable (50 ft increm, 1,000 ft max) 1 lb 5422M 145.00

9XOPT57 4-20ma for hazardous areas (factory installed) 1 lb 5423M 295.00This board is factory installed in the indicator, requires a barrier.

HDW0243 Barrier MTL 7787 4-20ma output 1 lb 5424 245.009000XLJBX FM approved 4 cell signal trim j box 1 lb 5425 325.00

Service Parts B59000XLMIS indicator w/o battery 4 lb 5426 1,395.00

A59000XLBIS Rechargeable battery pack 8 lb 5427 595.009000XLCIS Battery charger 3 lb 5428 275.009000XLLAIS AC power supply 3 lb 5429 870.00

SUB0407 24” AC power supply cable (ind to pwr supply) 1 lb 5430 95.008 ft extension for AC power supply cable 1 lb 5431 80.0018 ft extension for AC power supply cable 1 lb 5432 95.0028 ft extension for AC power supply cable 1 lb 5433 115.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

www.totalcomp.comFax 201-797-2287Toll Free Fax 888-797-2288 Components


Hazardous

LOAD CELL . . . . . . . .5 VDC(4)350 or (8)700 ohm load cells


CONVERSION . . . . . .10 updates per sec20 ms integration time20,000 display div100,000 internal div

OUTPUT . . . . . . . . . . .260ISB: No outputs since it is batteryoperated.260 ISA: Call for list of available outputs.

DISPLAY . . . . . . . . . . .LED light emitting diodes 0.6” high6 digit 999,999 displayDecimal point selectableDisplay div 1,2,5,10


POWER . . . . . . . . . . .260ISA: 115 VAC +/-10%, 50/60 Hz, 6 watts260ISB: 6 VDC battery operated w/120 VACbattery charger

SIZE . . . . . . . . . . . . . .9”W x 4”D x 6”H, 3.5 lbNEMA 4X stainless steel enclosureDesk top or wall mount

SPECIFICATIONS

260 ISB

260 ISA

Emery - 260IS Digital weight indicators - EmeryFactory Mutual approved for hazardous locations. Approved for Class I, II, III, Group A, B,C, D, E, F, G, Division I, II. Must be used with FM approved load cells. Enclosure isStainless Steel NEMA 4X. Model 260ISA is AC powered and Model 260ISB is Batterypowered for Intrinsically Safe operation.

The 260ISA System consists of an Stainless Steel indicator, separate NEMA 4 paintedsteel power supply that must be located in a safe area and optional interconnecting cable.Power supply connector (5 pin) is included. Load cell connector (6 pin) is included.Manual is included.

The 260ISB Indicator consists of a rechargeable battery that is mounted within the tiltstand base of the indicator. The battery is connected with a 5 pin connector and cable. Aseparate 6VDC charger is included for recharging the battery in a safe location. Thebattery will plug into the connector and cable of the charger. Load cell connector (6 pin) isincluded. Manual is included. Battery operating time is as follows:

LED LCD(1) 350 ohm cell 79 hrs 110 hrs(4) 350 ohm cells 55 hrs 80 hrsRecharge time is 24 hrs for fully discharged battery. Note the above times are forcontinuous operation. The unit has a sleep feature which will extend the time betweenrecharge cycles.

Factory Mutual Note: The electronic load cells, summing board and cabling (accessories)that are used with this equipment must be approved for use with this indicator, inaccordance with Factory Mutual Approval. A complete list of approved accessories isavailable when requested. All accessories used with the above equipment not listed underthe Factory Mutual file will void the F.M. approval and any liability coverage this approvalcarries.Part Number Weight Stock Price C260ISA Weight Indicator LED 120 VAC, power supply 5 lb 2216 $ 3,170.00Cable assy Indicator to power supply, 10 ft 1 lb 2213 64.00Additional cable per foot, max 50 ft 1 lb 2214 1.95

260ISB Weight Indicator LED Battery Powered 22 lb 2217 2,737.00

Service Parts CB-33144 Battery pack for 260ISB 9 lb 923 727.00Battery charger for 260ISB 2 lb 669 237.00Tilt stand base kit for 260ISB 2 lb 535 130.00

Instruction manual for 260ISA 1 lb 2218 86.00Instruction manual for 260ISB 1 lb 2215 86.00

113

350-IS & 355-IS GSE Weight Indicators - GSEIntrinsically safe indicators. 350-IS is the basic indicator and the 355-IS has keyboard fornumeric entry and function keys. Units are lb, kg, oz, g, lb-oz. Time & date with batteryback up. Nema 4X stainless steel enclosure, IP66.Part Number Weight Stock Price B5AC PowerGSE-350-IS LED display w/ AC power module 10 lb 3429 $ 1,725.00GSE-355-IS LED display w/ AC power module 10 lb 3430 1,825.00

Battery PowerGSE-350-IS LED display 10 lb 6191 1,725.00GSE-355-IS LED display w/ battery power module 10 lb 6192 1,825.00

Service Parts B5Battery operation for 350-IS or 355-IS 5 lb 3431 576.00

LOAD CELL . . . . . . . .5 or 8 VDC(4)350 ohm load cellsRemote sense for long cable runs


CONVERSION . . . . . .Update 60 times/sec100,000 display div1,000,000 internal div,


OUTPUT . . . . . . . . . . .(2) RS232 communication ports* (2) Logic level open collector drain setpoints* (1) Input TARE, PRINT or ZERO momentarydry contact closure.* Analog output* RS485* Ethernet

* Options

KEYS . . . . . . . . . . . . .350-IS: ZERO, PRINT, UNITS, TARE,SELECT355-IS: 0-9 keyboard, ON, OFF, ZERO,PRINT, SELECT, TARE, START, STOP,TARGET, UNITS, SAMPLE, ENTER

ANNUNCIATORS . . . .(12) for operational status

DISPLAY . . . . . . . . . . .LED 0.8” high 6 digitLCD 1.0” high 6 digitDecimal point selectable

POWER . . . . . . . . . . .85-265 VAC @ 0.5 ampOption: Battery operation

SIZE . . . . . . . . . . . . . .350: 11”W x 2.13”D x 7.25”H, 10 lb355: 11”W x 2.4”D x 9”H, 10 lb304 Stainless steel NEMA 4X IP66

SPECIFICATIONS

GSE-355 IS

GSE 350 IS

Hazardous



Toll Free Fax 888-797-2288Components



Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Hazardous

SPECIFICATIONS

LOAD CELL . . . . . . . .(4)350 or (8)700 ohm load cells


CONVERSION . . . . . .10 updates per sec20 ms integration time80,000 display div100,000 internal div

OUTPUT . . . . . . . . . . .Optional 20ma current loop serial ** Requires I/O Isolation Barriers

DISPLAY . . . . . . . . . . .0.56” LED6 digit 999999Decimal point selectableDivision 1,2,5,10



SAFE AREA . . . . . . . .7VDC output

SIZE . . . . . . . . . . . . . .9”W x 4”D x 6”H, 9 lbNEMA 4 stainless steel enclosure

Cable Length (Max)Group Power Load cell I/O

A,B 75’ 800’C 300’ 800’D 500’ 800’

E,F,G 500’ 800’

UMC600IS

UMC600IS Intrinsically Safe Digital weight indicator - CondecService parts onlyNTEP 98-000 III/IIIL, 10,000 divPart Number Weight Stock Price COptions CKPV7314 AC power cable per foot (Max 75 ft Group A,B) 1 lb 4109 1.80KPT7314 Load cell cable or I/O cable per foot 1 lb 4110 2.00KKW8900-1 I/O barrier assembly (Current loop output) 1 lb 4111 370.00

Service Parts CKLB8900-1 Spare battery pack w/cable and connector 9 lb 4114 425.00





Hazardous

Components

1250-4-EXP

Explosion Proof Junction BoxSumming junction cards are mounted in enclosures rated Class I, Group D; Class II,Groups E,F & G; NEMA 7 & NEMA 9. Each box has 5 holes drilled and tapped for 1/2”conduit size. Screw on cover has O-Ring for NEMA 4 watertight. Also complies with ULStandard 886 and CSA Standard C22.2 No. 30 1970.1250-4-EXP contains a summing junction card 1200 Series. It is behind a flat screw onlid for fast access and adjustment. Summing card will connect 2 to 4 load cells.Part Number Weight Stock Price C1250-4-EXP 29 lb 1267 $ 995.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Intrinsic Safety BarrierApproved by Factory Mutual, for use with 1 to 4 load cells in a clear coveredpolycarbonate junction box. Load cells can have resistance between 350 ohms and 800ohms. Indicator can have excitation voltage of 10 to 20 VDC and must have remote senseability. The Instrument Society of America (ISA) in their latest publication ANSI/ISA-RP12.6 defines load cells with wheatstone bridge circuits as Nonenergy Storing SimpleApparatus since it is a device which will neither generate nor store more than 1.2 V, 0.1 A,25 mW, or 20 µJ. Simple Apparatus require no approvals when connected to certifiedintrinsically safe associated apparatus such as Intrinsic Safety Barriers. This means thatany load cell in this catalog may be used with these Intrinsic Safety Barriers. 4 lb,8”x8”x6”h.Part Number Weight Stock Price CMTL-4 Std configuration -6 to +6 VDC 5 lb 1561 $1,632.00MTL-4 Optional configuration 0 to +12 VDC 5 lb 1539 1,493.00

Service Parts CMTL-766 1 lb 510 361.00MTL-764ac 1 lb 511 371.00MTL-761 1 lb 512 367.00MTL-715+ 1 lb 291 222.00

Standard configuration (AD4321,AD4323)Indicator power supply +6 VDC & -6 VDC (12 VDC) and +10 VDC & -10VDC (20 VDC)Excitation MTL-766 185 ohms max 11.2 VDC maxSense MTL-764ac 1075 ohms max 11.2 VDC maxSignal MTL-761 145 ohms max 7.5 VDC max

Optional configuration(AD4316,AN5316,ITG3030)Indicator power supply +12 VDC & 0 VDC (12 VDC) Grounded power supply.Excitation MTL-715+ 155 ohms max 13.0 VDC maxSense MTL-764ac 1075 ohms max 11.2 VDC maxSignal MTL-761 145 ohms max 7.5 VDC max

MTL-4

Hazardous





Process

Relays, Solid StateFor use with setpoint indicators for process control.Part Number Weight Stock Price CG120D10 Solid state relay 120 VAC 10 amp output, 1 lb 1447 $ 52.00

3-32 VDC input, 1,000 ohms input resistance,screw terminals, 1.75”W x 2.25”D x 1”H

12VDC Power Supply

G120D10

Legend plates

Components

Power suppliesFor use with process control setpoint indicators for relay control. Can also be used as anexternal load cell 12VDC power supply. Does not have remote sense. Should be usedwith a indicator that has signal adjust rather than power supply adjust on the senseamplifier. Will power (36)350 ohm load cells. Note: When using AD-4321 or AD-4323 donot connect the +EX from indicator.Part Number Weight Stock Price C12 VDC power supply 1.3 amp,3-3/4”x4-1/4”x1-1/2” 1 lb 660 $ 129.00

24 VDC power supply 700 ma, 3-3/4”x4-1/4”x1-1/2” 1 lb 1400 170.00

Pushbutton StationHeavy duty oil tight assembled pushbutton station with one standard black button and oneNO-NC contact block. NEMA 4 enclosure, 3.75”x3.75”x2”. Cast steel painted light gray.Surface mounting with 4 thru holes hidden under cover. One 3/4”NPT entry hole atbottom for 3/4” conduit fitting. Legend plates in stock are engraved TARE, ZERO, PRINT.Custom legend plates are available.Part Number Weight Stock Price CT3540 Single pushbutton station, does not 3 lb 825 $ 246.00

include legend plate. Order below.Legend plate engraved TARE 1 lb 999 26.15Legend plate engraved ZERO 1 lb 1000 26.15Legend plate engraved PRINT 1 lb 1001 26.15Legend plate with custom engraving 1 lb 826 32.40

LOAD CELL . . . . . . . .1.3 VDC to 10 VDC at 120ma(4)350 or (8)700 ohm load cells

ANALOG INPUT . . . . .5 µV to 1000 µV per div

CONVERSION . . . . . .Differential input amplifier with single endedoutput.

OUTPUT . . . . . . . . . . .N.A.

DISPLAY . . . . . . . . . . .LED 0.56” high+/- 1999 max displayDecimal location selectableDisplay div is 1


POWER . . . . . . . . . . .115 VAC 50/60 Hz, 6 watts

SIZE . . . . . . . . . . . . . .3-3/4”W x 6.5”D x 2”H, 1.2 lb

Process control weight indicatorWhen process control does not require the extreme high accuracy necessary forcommercial weighing, this indicator is the choice. It is a high quality low cost digital weightindicator for strain gauge load cells. Zero and span calibration is done with finepotentiometers and coarse Dip switches. Sealed metal front bezel (NEMA 4) for washdown and dusty environments. Panel gasket and mounting clips are included for panelmounting.Part Number Weight Stock Price CAPLSG Process control weight indicator 3 lb 1938 $ 326.00NEMA 4 enclosure, steel, 4.75”Wx8”Dx3”H 5 lb 1939 145.00

with rubber feet and tilt brackets

SPECIFICATIONS

APLSGProcess indicator

NEMA 4 enclosurefor use with APLSGfor wash down and dust


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Process





Process

Digital panel weight indicatorProcess panel meter for weight indication and control set points. This unit is not NTEPapproved for commercial applications. It is intended for in-plant process weighing andcontrol. Two alarm relay output. 4 digit display. Zero and span calibration is donedigitally with front panel keys. NEMA 4 (IP65) sealed front panel for wash down and dustyenvironments. Screw terminals make wiring connections fast and reliable. CE, CURapproved.Part Number Weight Stock Price CD3640 Digital panel weight indicator 2 lb 4436 $ 396.0

Options COpt-H Analog output 1 lb 4437 117.00Opt-I Infrared wireless setup 1 lb 4438 182.00

Opt-K 1/8 DIN adapter 1 lb 4439 41.25Opt-T RS232 output 1 lb 4440 117.00Note: Options H and T cannot be installed together.

SPECIFICATIONS

D3640Process indicator

with set points



CONVERSION . . . . . .5 times/sec update rate

OUTPUT . . . . . . . . . . .(2) SPST relay outputsRS232 *Baud rates 300, 600, 1200, 2400, 4800, 96004-20 ma analog ** Optional

DISPLAY . . . . . . . . . . .LED display 0.56” high- 1999 to + 9999 max displayDecimal location selectableDisplay div is 1


POWER . . . . . . . . . . .90-264 VAC 47-70 Hz, 4 VA

SIZE . . . . . . . . . . . . . .2.83”W x 4.92”D x 0.94”H 3/64 DINPanel mount cutout 22mm x 68mmNEMA 4 IP65 Polycarbonate case1 lb

Components


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

SPECIFICATIONS

Process

Digital panel weight indicatorProcess panel meter for weight indication only. This unit is not NTEP approved forcommercial applications. It is intended for in-plant process weighing. High speed andhigh resolution for single and dual channels. 6 digit display. Zero and span calibration isdone with front panel keys. NEMA 4X sealed front panel for wash down and dustyenvironments. Screw terminals are included.Part Number Weight Stock Price CD3720-1 meter 6 digit display 3 lb 4441 $ 778.00D3722-1 meter w/2 scale input 3 lb 4443 812.00

Options COpt C 3 relays, form C 5A @ 240 VAC or 30 VDC 1 lb 4444 210.00Opt H 16 bit analog output (includes Opt P) 1 lb 4445 350.00

0-20ma, 4-20ma, 0-10V, 0-5V, -5V to +5VOpt P Excitation supply 1 lb 4446 101.00

Jumper selectable 5, 10, 15, 24 VDC



CONVERSION . . . . . .60 times/sec update rate100,000 display divisions400,000 internal divisions

OUTPUT . . . . . . . . . . .Set points (1)Set points (3) *4-20 ma analog ** Optional

DISPLAY . . . . . . . . . . .LED display 0.56” high+/- 999,999 max displayDecimal location selectableDisplay div is 1


POWER . . . . . . . . . . .85-265 VAC 50/60 Hz, 15 watts

SIZE . . . . . . . . . . . . . .4.13”W x 4.43”D x 2.3”H 1/8 DINPanel mount cutout 45mm x 92mmNEMA 4X Aluminum case1 lb

D3720Process indicatorwith set point





Process

SPECIFICATIONS

CPJ-CEAnalog output board

CPJDual setpoint board

DIN rail mount

Scaime Type CPJ Analog TransmitterSignal Conditioner and analog transmitter will work with all strain gauge type inputs (loadcells, pressure transmitters, etc.). CPJ output is 4-20ma or 0-10VDC. Works with loadcells having 120 to 1000 ohm input and 2 to 3 mv/V output. Potentiometers for adjustmentof zero and span.Part Number Weight Stock Price B5CPJ-Card Analog output board 1 lb 4017 $ 252.00CPJ-DIN analog output DIN mount 1 lb 6245 289.00CPJ-2S-DIN 2S Analog output w/ 2 relays 1 lb 4018 396.00

LOAD CELL . . . . . . . .10 VDC 95 ma(4)350 or (8)700 ohm load cells

ANALOG INPUT . . . . .2 & 3 mv/V load cells

CONVERSION . . . . . .Differential input amplifier with singleended output

OUTPUT . . . . . . . . . . .4-20ma, 0-10VDC2 set points w/3A/250V relays

DISPLAY . . . . . . . . . . .None for weight3 digit display for setpoint


POWER . . . . . . . . . . .12 VDC (11.5 to 27 VDC), 190 ma

SIZE . . . . . . . . . . . . . .Card: 105mmW x 98mmD x 28mmH, 0.5 lbDIN: 130mmW x 107mmD x 28mmH, 0.7 lb

Components


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Process

Analog to Digital ConverterSignal conditioner with analog to digital converter, DIN-Rail mount. For use with straingauge load cells. The ADC will convert the analog signal to digital using Advanced LoadCell Protocol. Input and output terminal blocks are lever type that assure good lowvoltage connections. Circuit card with components can be easily disconnected from mainprinted circuit card for convenient serviceability.

The TDLC-DIN provides a fast RS485 digital output for use with computers and PLC’s.Baud rate is selectable, 19,200, 38,400, 57,600 and 115,200. Requires a 12 VDC powersupply.Part Number Weight Stock Price CTDLC-Din 1 lb 128 $ 175.00

OptionsUSOTL4 adapter RS485 to USB 1 lb 423 285.00

Service Parts CTDLC Card w/ connectors 1 lb 2776 132.00

TDLC-DINDigital signal conditioner

SPECIFICATIONS

LOAD CELL . . . . . . . .5 VAC (3) 350 or (6) 700 ohm load cells

ANALOG INPUT . . . . . 2 & 3 mv/V load cells

CONVERSION . . . . . . Delta sigma A/D conversionCrystal Semiconductor60 conversions per second

OUTPUT . . . . . . . . . . . RS485, 0 to +/- 400,000 Countload cell addresses up to 255Baud rate 19,200 to 115, 200

DISPLAY . . . . . . . . . . .None


POWER . . . . . . . . . . .12 VDC, 125 ma each load cell.

SIZE . . . . . . . . . . . . . .1.7” x 3.4” x 4.0”DIN-rail mount





Process

SPECIFICATIONS

AD101w/AED9001

LOAD CELL . . . . . . . .5 VDC(1)350 ohm cell(AD101)(4)350 ohm load cells(AED9001)6 wire remote sense

ANALOG INPUT . . . . .-3.2 mV/V to +3.2 mV/V

CONVERSION . . . . . .Update rate 150 Hz nominal24 bit remote display div

OUTPUT . . . . . . . . . . .RS232 bidirectionalBaud rates 1200, 2400, 4800.9600, 19.2K, 38.4K, 76.8K bps1 start bit, 8 data bits, 1 stop bit,Even parity, XON/XOFF handshake.

DISPLAY . . . . . . . . . . .Remote display only(by others)


POWER . . . . . . . . . . .7.8 to 15 VDC, 60 ma(AD101)10 to 30VDC, 120ma(AED9001),Nominal: 12 VDC, 1.5 watts

SIZE . . . . . . . . . . . . . .3.7”L x 2.1”W x 0.7”H, 3 lb

HBM Inc AD101 Digital Transducer AmplifierComplete bridge transducer amplifier with RS232 interface. Patented error-free highspeed integrating A/D conversion. Extensive command set makes it easy to setup andcommunicate. Built-in user selectable digital low pass filters. User adjustable system zeroand span scaling factors. User configurable linearization correction. Automatic backgroundcalibration. On-board EEPROM to store setup parameters. Optional NEMA 4 case withRS422 and RS485 multi drop network interface.Part Number Weight Stock Price CAD101/AED9001 24 Bit Digital Transducer Amplifier 3 lb 67 $ 970.00mounted in NEMA 4 enclosure, RS422, RS485

Service Parts CAD101 24 Bit Digital Transducer Amplifier 1 lb 74 490.00AED9001 mounted in NEMA 4 enclosure 1 lb 76 961.00

w terminals. RS422, RS485

Components


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

SPECIFICATIONS

LOAD CELL . . . . . . . .1 to 10 VDC(1 volt steps) 125ma(4)350 or (8)700 ohm load cells

ANALOG INPUT . . . . .0-5mV to 0-1200mV

CONVERSION . . . . . .Differential input amplifier with single endedoutput

OUTPUT . . . . . . . . . . .Current 0-2ma,0-10ma,2-10ma,0-16ma,4-20ma,0-20maVoltage 0-1V,0-2V,0-4V,0-5V,1-5V,-/+5V,-/+10V,0-8V,2-10V,0-10V

DISPLAY . . . . . . . . . . .None


POWER . . . . . . . . . . .115 VAC 50/60 Hz, 2.5 watts

SIZE . . . . . . . . . . . . . .1.75”W x 2.38”D x 2.75”H, 1 lb

Process

4058G

Absolute Process Instruments Model 4058G Signal ConditionerPlug in signal conditioner will work with all strain gauge type inputs. Output is switchsettable to 16 Current or Voltage ranges including the popular 4-20 ma analog. Setup isdone with rotary switches and easy to use tables. Works with load cells having 120 to1000 ohm input and 2 to 3 mv/V output. Functional field test pushbutton. Switches andpotentiometers for adjustment of zero and span.Part Number Weight Stock Price C4058G Signal Conditioner 2 lb 1626 $ 455.0011pin surface mount socket 1 lb 1630 17.10Instruction sheet 1 lb 1647 3.00


Process




Components

SPECIFICATIONS

LOAD CELL . . . . . . . .5 to 10 VDC 120 ma(4)350 or (8)700 ohm load cellsRemote sense for long cable runs

ANALOG INPUT . . . . .2 & 3 mv/V load cells

CONVERSION . . . . . .Precision differential input amplifierwith isolated, filtered output

OUTPUT . . . . . . . . . . .433: 4-20 ma or 0-20 ma463: 0-10 VDC437: 4-20 ma 0r 0-20 ma

DISPLAY . . . . . . . . . . .None


POWER . . . . . . . . . . .433: 115 VAC +/-10V 50/60 Hz, 7 VA463: 115 VAC +/-10V 50/60 Hz, 7 VA437: 10 to 36 VDC

SIZE . . . . . . . . . . . . . .3.75”W x 2”D x 2.87”H, 2 lb

Totalcomp

433

Model 433 & 463 Bridgesensor Signal ConditionerSelf contained signal conditioner will work with all strain gauge load cells. Output is eithervoltage or current. One model has 0-10 VDC analog and the other is an isolated 4-20 maor 0-20 ma analog which allows daisy chained indicators in multiple locations. ACpowered. Capable of driving (4) 350 ohm load cells. Bridge balance with 80% tare offsetcapability. Rugged epoxy encapsulated design.Part Number Input Output Weight Stock Price B5433 Bridgesensor 115 VAC 4-20 ma or 0-20 ma 2 lb 132 $ 438.00463 Bridgesensor 115 VAC 0-10 VDC 2 lb 1271 438.00437 Bridgesensor 10-36 VDC 4-20 ma or 0-20 ma 2 lb 1627 419.00460 Bridgesensor 115 VAC -10 VDC to +10 VDC 2 lb 1824 368.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Process



Components

TotalcompT4710 BridgesensorSelf contained, DC powered Din-Rail mount module designed for strain gage load cells.Output of 4-20ma or 0-10VDC. Precision instrumentation amplifier, filtered output and abuilt-in 10V excitation supply capable of driving a 350 ohm bridge. The 0-30mV inputrange makes it compatible with most strain gage based load cell or pressure transduceroutputs. Includes 6” of Din rail. Needs external 24VDC power supply. Connections aremade via easily accessible screw clamp terminal blocks. Zero and Span adjustmentpotentiometers are located externally for easy access.Part Number Weight Stock Price B5T4720-D Bridgesensor Din Rail 4-20ma 1 lb 3798 $ 183.34T4710-D Bridgesensor Din Rail 0-10V 1 lb 3731 183.34

T4720-DBridgesensor

NEWNEW

TotalcompT4715 BridgesensorT4715 & T4725: Self contained, DC powered module designed for load cell, strain gage,or single ended use. Precision instrumentation amplifier, filtered output and built-in 5VDCexcitation supply capable of driving a 350 ohm bridge. The 0-15mV input range makes itcompatible with most strain gage based load cell or pressure transducer outputs. TheT4715 provides an output of 0 to 10VDC. The T4725 provides an output of 4 to 20mAConnections are made via easily accessible screw clamp terminal blocks. Zero and Spanadjustment potentiometers are located externally as well for easy access..

T4850 & T4855: 4 channel DC powered module designed for load cell, strain gage, orsingle ended use. Consisting of 4 individual amplifier channels and an adjustableexcitation supply. Each channel contains a precision instrumentation amplifier withindividual Zero and Span adjustments. The T4850 Bridgesensor has a filtered 0-10VDCoutput. The T4855 Bridgesensor has a 4-20mA filtered output. The 0 to 30mV inputrange of each channel makes them compatible with most strain gage based load cell orpressure transducer outputs. The excitation supply is designed to drive four 350 ohmload cells and is adjustable from 5 to 10VDC.Part Number Weight Stock Price B5T4715 Bridgesensor Din Rail 0-10VDC 1 lb 5468 $ 175.00T4725 Bridgesensor Din Rail 4-20 ma 1 lb 5469 175.00

T4850 Bridgesensor 4 Channel 0-10 VDC 1 lb 5482 475.00T4855 Bridgesensor 4 Channel 4-20 ma 1 lb 5483 475.00

T4850-W4 Bridgesensor 4 Channel DC 0-10 VDC NEMA 5 lb 5484 705.00T4855-W4 Bridgesensor 4 Channel DC 4-20 ma NEMA 5 lb 5485 705.00

T4850Bridgesensor

T4855Bridgesensor

T4715Bridgesensor

NEWNEW

12713-01 Pollitt DriveFair Lawn NJ 07410201-797-2718 * 800-631-0347



Prices are subject to change without notice. Please call for current prices.

Process

Other items are available from the manufacturers, please call for prices.

TCM1.12.500-115Power Supply

Totalcomp

Components

TCM1 Power SupplyThese chassis mountable supplies are ideal for use as a bridge excitation source, or forinstrument design and test equipment. Unique clamp type barrier strip. Four molded-inthreaded inserts. Four through holes for easy mounting. The TCM1 units can also beused as supplemental bench or laboratory power supplies. The special clamp type barrierstrip secures the wire without twisting. Note the protected, recessed, barrier strip facingthe top of the case. This allows all connections to be made in tight quarters whileprotecting the barrier strip from physical damage.Part Number Weight Stock Price B5TCM1.12.500-115 12 VDC power supply 2 lb 6445 $ 173.25TCM1.24.240-115 24 VDC power supply 2 lb 6446 173.25

NEWNEW


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Remote

Totalcomp

TSR-0.4L-EXPExplosion proof

TSR-0.4LPanel Mount

TSR-4LWeathertight

Recommended distances for data transmission

Output No. Conductors Max distance

BCD 25 10 ft

RS232 4 50 ft

20 ma 4 2,000 ft


TSR-1LDesk or panel mount

Totalcomp Smart Remote display Model TSR-LBright digits, L.E.D. seven segments, 6 digit, max 999999. For indoor use away fromdirect sunlight for best viewing. Displays that will mount outdoors in direct sunlight shoulduse the Model TSR-M for sharpest contrast and maximum clarity. Serial input RS232C,20 ma serial current loop, active or passive. 1200, 2400, 4800, 9600 baud, 7 or 8 databits, odd, even or no parity, 1 or 2 stop bits. No setup is required. Just connect the signalwires. Press the LEARN button and the Smart Remote sets itself up. Rugged enclosureis weathertight for harsh environments. Available in painted steel or stainless steel.Mounting is either panel, desk or U Bracket which allows a full 360 degree swivel andeasy tilting for the optimum viewing angle. -40 deg C to +75 deg C. 115 VAC, 60 Hz.Other operating voltages such as 12VDC, 24VDC, 230VAC, 50Hz are available as aspecial order at no additional charge.Part No Height Dist Case” Watt Weight Stock Price CU-Bracket mount WeathertightTSR-2L 2” 80’ 16x5x6h 12 15 lb 1766 1,089.00TSR-4L 4” 160’ 27x7x9h 22 27 lb 1767 1,669.00

Stainless Steel w/ U-Bracket mount WeathertightTSR-2L-SS 2” 80’ 16x5x6h 12 15 lb 889 1,321.00TSR-4L-SS 4” 160’ 27x7x9h 22 27 lb 890 1,946.00

Panel mounting only. 1/8 DIN size. NEMA 1 (Not weathertight)Power cord (120VAC) is not included.TSR-0.4L 0.4” 16’ 5.5x3.75x2h 6 2 lb 1564 $ 351.00

Explosion ProofTSR-0.4L-EXP 0.4” 16’ 8x5x5h 6 8 lb 2631 1,026.00

Desk mount or panel mount NEMA 1 (Not weathertight)TSR-1L 1” 40’ 7.5x6.5x3.5h 6 4 lb 1756 535.00

OptionBCD to serial converter(mount next to indicator) CPC-328 Protocol Converter w/6 VDC adapter 2 lb 1614M 655.00



Remote

Totalcomp

TSR-1.5M

TSR-4M



Totalcomp Smart Remote display Model TSR-MMechanical display with highly visible yellow digits on black background. This display isthe choice for mounting in bright sunshine. Digits are 1.5”, 4” or 6” high. Seven segment.Heavy duty case is weathertight for harsh environments. Available in painted steel orstainless steel. Mounting is with a “U” bracket that allows a full 360 degree swivel andeasy tilting for the optimum viewing angle. Display is 6 digit and readout can be 4, 5 or 6digits. Input is RS232C, 20 ma serial current loop active or passive. 1200, 2400, 4800,9600 baud, 7 or 8 data bits, 1 or 2 stop bits, odd, even or no parity. No setup is required.Just connect the signal wires. Press the LEARN button and the Smart Remote sets itselfup. -40 deg C to +75 deg C. 115 VAC 50/60 Hz. Other operating voltages such as12VDC, 24VDC, 230VAC, 50Hz are available as a special order at no additional charge.Part No Height Dist Case” Watt Weight Stock Price CTSR-1.5M 1.5” 60’ 12x5x6h 25 12 lb 960 $ 1,399.00

TSR-4M 4” 160’ 27x7x 9h 30 31 lb 961 1,775.00TSR-6M 6” 240’ 34x8x12h 40 53 lb 962 2,139.00Stainless SteelTSR-1.5M-SS 1.5” 60’ 12x5x6h 25 12 lb 2883 1,767.00

TSR-4M-SS 4” 160’ 27x7x 9h 30 31 lb 2884 2,607.00TSR-6M-SS 6” 240’ 34x8x12h 40 53 lb 2885 2,232.00OptionBCD to serial converter(installs at indicator) CPC-328 Protocol Converter w/6 VDC adapter 2 lb 1614M 655.00

Components


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Remote

General Sensor Lighted Remote DisplayLighted high intensity LED remote display with auto configuring for determining the baudrate from 300 through 9600, 7 or 8 data bits. odd, even or no parity, 1 or 2 stop bits.Interface choices are RS232, 20ma current loop (active or passive) and optionalRS422/485. 150 deg viewing angle. High Intensity LED digits have high visibility digitsfor both indoor and outdoor use. LEDs have a high life with no moving parts to repair orreplace. If a decimal point is transmitted, it will be displayed in the correct position. If aminus sign is transmitted, the minus sign will be displayed in front of the next 5 digits..Enclosure is NEMA 4X non-metallic for harsh environments. 120 VAC 120 watts. 23”W x5”D x 12”H.Part Number Digit Height Dist Weight Stock Price CGSR-3L Remote display 3” 120’ 8 lb 3860 $ 865.00GSR-6L Remote display 6” 240’ 12 lb 3861 1,255.00

GSR-6L

Aurora 45 lighted

Aurora 65 lighted

Aurora 45 SLw/ stop light

Aurora 20 lighted

Western Weighing Technologies Remote DisplayTough, dependable and weatherproof. Mild steel with powder coated finish. 6 digit 7segment, no glare lens LED display. Annunciator lights for: GR, NT, lb, kg. 5 standardcommunication protocols. Selectable day and night brightness levels. Power save mode.Built-in relay for external traffic light control (except 2”). Leading zero suppression.Optically isolated port for lighting protection. Switch selectable configuration and options.RS 232, RS 422, RS 485 multi drop. 20 mA current loop active and passive. 90 to 240VAC. 2 year warranty.Part Number Digital Height Dist Weight Stock Price B5Aurora 45 lighted 4.5” 180’ 30 lb 6983 $ 1,115.00Aurora 65 lighted 6.5” 260’ 55 lb 6984 1,289.00Aurora 45 SL w/ stop light 4.5” 180’ 30 lb 6985 1,329.00Aurora 20 lighted 2” 80’ 15 lb 6986 649.00

Options B5Wireless RF module for Aurora 1 lb 6987 185.00Scale links wireless transceiver 3 lb 6988 510.00

for scale indicator.





Remote

SA2000

S480

Cardinal

SB500SRemote display

Remote Display6 digit 5” high LED display. 140 deg viewing angle. Enclosure is NEMA 4/IP65 withmounting tabs. Either painted steel or stainless steel enclosures are available. 120 VAC120 watts. 32.1”W x 5.5”D x 16.75”H.Part Number Digit Height Dist Weight Stock Price BSB500 Remote display, 5” 200’ 39 lb 5364 $ 1,551.00

w/painted steel enclosureSB500S Remote display, 5” 200’ 39 lb 5365 1,882.00

w/ stainless steel enclosure

SB500M Remote display, 5” 200’ 39 lb 5366 1,827.00w/scrolling massage board

AB500MS Remote display, 5” 200’ 39 lb 5367 2,093.00message, stainless steel

Components

Remote displayThe S400 remote display is clearly readable in pouring rain, bright sun, pitch dark, insideor out, without additional lighting or shielding. The SA2000 is for indoor use only. Theywill interface with any digital indicator, terminal, or computer with standard output. Thedisplay features light emitting diodes (LED’s) which can withstand temperatures rangingfrom -50 deg F to 120 deg F. The 2” display has 8 digits 5x7 dot matrix alphanumericLED. The 4.5” display has 6 digits, 7 segments each, max 999,999. Decimal point isselectable. One or two fixed zeros. RS232 or 20ma current loop active or passive. Baudrates 50 to 9600. Power required is 9 to 12 VAC or VDC at 3 amps provided by powersupply (included) UL listed, plug in wall transformer, 120VAC, 60Hz, 1 amp with 6 ft 3cond cable to display. Easily extended in the field. S400 & S400HI is NEMA 4X moisturetight 32.5”W x 3.5”D x 11.5”H. SA2000 is NEMA 1 for indoor use, 16”W x 4”D x 5”H.Power supply wall transformer 2”x 2”x 3”.Part Number Height Dist Weight Stock Price CSA2000 Alpha-numeric display 2” 60’ 8 lb 1028 $ 895.00S400 Numeric display 4.5” 100’ 16 lb 793 1,195.00S400HI Numeric High Intensity 4.5” 180’ 17 lb 794 1,495.00

S480 Alpha-Numeric display 4.5” 100’ 16 lb 2780 1,495.00S480HI Alpha-Numeric High Intensity 4.5” 180’ 17 lb 2781 1,795.00

Service Parts CInstruction manual for S400 1 lb 769 29.00Transformer for S400 120 VAC to 10VAC (outlet style) 2 lb 1420 91.00Transformer for SA2000 & SWII 120VAC to 14VAC 2 lb 893M 102.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Remote

A&D AD-8920 Remote digital displayRemote display for A&D Electronic balances. Connects to either the RS232 or theCurrent loop interface. Bright 7 digit VFD is easy to read. 4.72” W x 2.99” D x 3.54” H.Powered by 115 AC adapter which is included.Part Number Weight Stock Price CAD-8920 Remote display 2 lb 1160MB $ 250.00

AD-8920

EN45P

Electro-Numerics Model EN45P4 to 20 ma remote display. Digital readout, 4 1/2 digit, basic accuracy 0.01%. Brightred/orange LED display digits 0.56” high. Max display is +/- 19999. Min division is 1.Update rate is 2.5 per second. Input is standard 4 to 20 ma. Span is adjustable from +/-200 to 19,999 counts with fine and coarse potentiometers. Zero is adjustable +/- 10,000counts with fine and coarse potentiometers. Jumper selectable decimal point. Case ismade for panel mounting with standard 1/8 DIN cutout 92mm x 45mm (3.78”x1.89”). Rearconnector has screw terminal barrier strip for easy field wiring. 115 VAC(+15%-10%), 47to 400 Hz, 4.5 Watts, 3.78”W x 6.00”D x 1.89”H. Two year warranty.Part Number Weight Stock Price CEN45P Remote display 4 to 20 ma input 2 lb 1954 $ 394.00

Remote Display Model T500EPThis remote display is a standard T500EP indicator which has a selectable feature to be aremote display. LED display with 0.6” digit height. 120 VAC 0.5 watts.Part Number Digit Height Dist Weight Stock Price CT500EP Remote display 0.6” 24’ 4 lb 6437M $ 358.00

T500-EP

Totalcomp





Remote

TotalcompEasy-Link Wireless CommunicationAt last a wireless system that is easy to set up. All the parameter settings and computerprogramming has already been done. Just connect 2 wires at the indicator and 2 wires atthe remote display or printer and you are ready to communicate. Indoor systems andoutdoor systems are available for most applications. Indoor systems have a range of 300ft. Outdoor systems have a range of 3,000 ft.If the factory settings are not suitable for your application, we can reprogram the units foryour custom application.Each kit includes (1) Home unit, (1) Remote unit, (2) Power supplies, plug in w/6 ft cable,120 VAC for home & remote units, (2) Cables 4 ft RS232 with pigtail ends, (1)InstructionManual with Programming CD, (1) Cable for connecting to a computer, RS232, forprogramming to different specifications. Factory setup is: 2400 baud, 1 start bit, 7 databits, odd parity, 1 stop bit, a unique system number and destination name. 120 VAC 6watts.Part Number Weight Stock Price CEasy Link Wireless, indoor kit 6 lb 3617 $ 648.00Easy Link Wireless, outdoor kit 30 lb 1242 1,650.00

Service Parts CEasy Link Wireless, indoor unit 5 lb 3619 284.00Easy Link Wireless, outdoor unit 12 lb 3620 785.00

Indoor home cable 4 ft RS232 w/pigtails 1 lb 3622 80.00Indoor remote cable 4 ft RS232 w/pigtails 1 lb 3623 80.00

Outdoor home cable 4 ft RS232 w/pigtails 2 lb 1540 80.00w/connector for power adapter

Outdoor remote cable 4 ft RS232 w/pigtails 2 lb 4067 80.00w/connector for power adapter

Yagis antenna for outdoor unit 4 lb 6298 140.00RGB 25 ft low loss RF cable for outdoor unit 4 lb 6299 81.00

Power adapter 120 VAC 6 ft cable, indoor 2 lb 3621 23.00Computer cable RS232 1 lb 3624 35.00Instruction Manual w/Program CD 1 lb 3625 83.00

Easy Link indoor unit (rear view)

Easy Link outdoor unit

Easy Link indoor unit (front view)

Components


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Bar Code

Eltron Bar Code Label Printer - LP-2022/2042Service parts only.Part Number Weight Stock Price CService Parts for LP2022Print head for LP2022 1 lb 489 205.00Feed switch assy for LP2022, pack of 5 1 lb 4074 122.50Gap sensor kit for Eltron LP2022 1 lb 4075 47.90

Main board for LP2022 1 lb 491 245.00Eprom for LP2022 1 lb 3707 37.15Plastic cover for roll labels 1 lb 1551 77.00

2.25”W x 2”H label roll (735) 1 lb 4138 7.902.25”W x 0.75”H label rolls case of (12) 11 lb 4477 83.702.25”W x 2”H label rolls case of (12) 11 lb 3709 94.70

Service Parts for LP2042 CPrint head for LP2042 1 lb 3705 285.00

Labels for direct thermal only4”W x 2.5”H direct thermal label rolls case of (12) 20 lb 4478M 167.004”W x 4”H direct thermal label rolls case of (12) 20 lb 3710M 155.004”W x 5”H direct thermal label rolls case of (12) 20 lb 1538M 167.00

LP-2042PSA





Bar Code

Zebra Bar Code Label Printer - 2824 & 2844Label printers. 128K memory standard. RS232 & USB. Print speed 4” per second. 203dpi resolution. 5” dia label roll capacity. Order mating connector DB9P separately.115VAC 50/60 Hz2824: 3.6”W x 7.5”D x 6.8”H, 4 lbs2844: 7.9”W x 8.4”D x 6.8”H, 4 lbs.Part Number Weight Stock Price C2” WideLP-2824-S printer direct thermal 6 lb 4553 $ 395.00TLP-2824-S printer thermal transfer 6 lb 4555 495.00

4” WideLP-2844 printer direct thermal 7 lb 4556 575.00TLP-2844 printer thermal transfer 7 lb 4559 675.00

Options C4’ custom interface cable 1 lb 710M 80.0010’ Interface cable to PC (DB9 to DB9) 1 lb 4061 14.256’ Interface cable to PC (DB25 to DB9) 1 lb 4062 14.25

Service Parts C105900-066 Power supply for LP-2824/2844, 100-240 VAC 1 lb 1045 178.00

Service Parts for 4” Wide TLP2844 CRibbons for thermal transfers only800130-004 Black wax ribbons case of (12) 4 lb 2486 77.404”W x 5” thermal transfer label rolls case of (12) 20 lb 1741 122.00

Service Parts for 4”Wide LP2844 CLabels for direct thermal only4”W x 2.5”H direct thermal label rolls case of (12) 20 lb 4478M 167.004”W x 4”H direct thermal label rolls case of (12) 20 lb 3710M 155.004”W x 5”H direct thermal label rolls case of (12) 20 lb 1538M 167.00

LP 2824

LP 2844

Print head for Datamax I- 4206, I - 4208, I - 4212Service parts only.Part Number Weight Stock Price CSSI-ICLASS-203Q Print head for 42xx 1 lb 4139 $ 339.00

SSI-ICLASS-203Q

Components

Prodigy PlusBar Code printerThermal transfer anddirect thermal

Prodigy MaxBar Code printerThermal transfer anddirect thermal

Prodigy Plus & Prodigy Max Bar Code Label PrinterService parts only for Prodigy thermal transfer and direct thermal.Part Number Weight Stock Price CService Parts CPrint head for Prodigy Max & Plus 1 lb 490 454.55Service Manual for Prodigy Plus 1 lb 3781 95.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Bar Code

Ovation! 2

Ovation! 2 Bar Code Label PrinterThermal transfer and direct thermal. RS232 and parallel interface. High quality 203 dpiresolution. Prints 2” per second. 4.16” maximum print width. Prints code 39, interleaved2 of 5, Code 128 (subsets A, B and C), Codabar, UPC-A, UPC-E UPC 2 & 5 digitaddendums, EAN-8, Ean-13, Code 93, UCC/EAN Code 128, Postnet, PDF417, Code 128MOD 43, and UPS Maxicode. Comes with Windows driver. Dimensions, 8.8”W x 10.1”Dx 6.2”H. 115VAC 50/60 Hz.Part Number Weight Stock Price COvation! 2 direct thermal label printer 7 lb 4133 $ 795.00Ovation! 2 thermal transfer label printer 7 lb 4134 845.00

Options CInterface cable 6’ to PC 1 lb 4135 49.00





Bar Code

Components

TotalcompTotalcomp DDC9600 SE label printing systemThe DDC9600 SE labeling system combines the simplicity of a menu driven configurationwith the power to design new label formats. The DDC9600 SE consists of a controllerand a bar code label printer. The Controller is housed in a stainless steel Nema IVenclosure. The bar code label printer can be housed in a stainless steel or high-impactplastic enclosure. The controller has customer formattable label formats. Stores up to250 PLU’s (Price Look Ups) and 9 label formats (250 optionally), Time/date, 8 dateformats, selectable serial number formats, 55 programmable “Hot Keys”, sell by/bestbefore offsets, second party labeling, rate calculation, fixed weight labels, lot number,rounding, hi/low limits, 22 bar code formats including UCC/EAN Code 128, pallet totallabel, report label, batch label printing, multi language printing capability and automaticmode. The controller also allows you to save files to a PC.Part Number Weight Stock Price CDDC9600 SE labeling system w/stainless steel printer 52 lb 3814 $ 7,387.27DDC9600 SE labeling system w/high-impact plastic printer 52 lb 3815 5,570.00

Options CHot Key overlay 1 lb 3816 185.00Label format & graphics memory upgrade 3817 471.00Panasonic 80 column report printer 6 lb 3818 675.00

Serial output 1 lb 3819 271.00Protective plastic cover for Printer 1 lb 3820 107.00

Protective plastic cover for Controller 1 lb 3821 92.80Stainless steel bench stand w/casters 40 lb 3822 1,992.00

DDC9600 SE

Sample Label

TPC time & date controller

Totalcomp

Serial to 20ma current loop converterThis adapter allows RS232 input printers to be used with indicators that have only 20 maserial output.. RS232 side has 25 pin connector and 20ma serial side has terminalblocks. If the 20ma loop needs a power supply to make it active, use the optional powersupply. 2”W x 2.5”D x 0.6”H.Part Number Weight Stock Price C232CL4 Converter RS232/20ma & 20ma/RS232 1 lb 3274 $ 173.00

Options C232PS2 Power supply for 20ma active 1 lb 3275 36.00

232CL4

Totalcomp TPC Time & Date printer controllerGet the most from a low cost printer and weight indicator. The TPC time and datecontroller interfaces to our line of inexpensive Epson dot matrix printers (TM-U200 & TM-U295). Print time & date (battery backup). Normal size print, double wide print, doublehigh with double wide print. Print normal or inverted. Indent, selectable pre-spaces. Linespaces, select blank lines. Auto release of the ticket after printing (TMU295). Controllerprovides power to the printer. No need to purchase separate power supply. Mount printeron top of controller. Order DE-09S input connector separately. Dimensions, 5”H x 8”W x2”D. 115VAC 50/60 Hz.Part Number Weight Stock Price CTPC time & date printer controller (RS232 input) 5 lb 265M $ 714.00TPC time & date printer controller (20ma input) 5 lb 3785 714.00

4’ custom interface cable 1 lb 710M 80.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Bar Code





Printer

Components

Totalcomp

TYJ-360-D

NEWNEW

80252042

80252042 Palm sized PrinterLight weight, palm sized dot matrix roll paper printer. Desktop or wall mountable. Ultracompact and perfect for a wide array of applications. Paper near end detection. ACpower adapter included. 4.17”W x 7”D x 3.5”HPart Number Weight Stock Price B80252042 Ticket printer 2 lb 7426 $ 456.00

Options B80251932 Roll paper 1 lb 7427 9.2080251933 Ink ribbon 1 lb 7428 25.0080500570 RS232 Cable & adapter, Voy/Exp 1 lb 7429 95.00

80252571 RS232 Cable & adapter, Disc/Pion/MB 1 lb 7430 95.0080252573 RS232 Cable & adapter, CD Troop 1 lb 7431 95.0080252574 RS232 Cable & adapter, CW/CKW/T 1 lb 7432 105.0080251934 adapter1 1 lb 7433 15.00

Model TYJ-360-D Tape Printer - Serial InputDot matrix tape printer. 30 column. RS232 input. 12 VDC operation for use on mobileequipment such as vans or trucks. Uses standard adding machine tape 2-1/4” wide withdiameter 2-3/8”. Plastic lid protects roll paper. Baud rates 2400, 9600, 19,200, 115,200,none/odd/even parity, 7/8 data bits 1 stop bit, X-ON/X-OFF protocol. Power On/Offswitch, FEED key, ON LINE key. 12 VDC, 5 watts, 4.5”W x 6.5”D x 3.5”H.Part Number Weight Stock Price CTYJ-360-D Ticket printer, 12VDC 5 lb 4570 $ 392.00

Service Parts CWP:PP137 Roll paper, pack of 5 1 lb 1596M 22.00ET:ERC-09 ink ribbon * 1 lb 2751M 7.25

* Also used in Toledo SQC-14 and Weightronix WP-223, 230, 231, 233

Option CAC adapter120VAC/12VDC 1 lb 2843M 28.25


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Printers

MM2481

Keltron Miniprinter - MM2481 Panel PrinterRoll paper tape printer. Friction feed uses 2.25” wide paper on max 1.75” dia roll. Dotmatrix characters both alpha & numeric 2.6mm high x 1.7mm wide. Print line is 24characters, 13 char/inch, .7 lines/sec, 6.72 lines/inch. Pushbuttons for ADVN, FEED,TEST, SLCT. Indicator lights for DTR, EOP. End of paper sensor will flash indicator light.Internal Time & Date clock is settable with the ADVN and SLCT buttons. Serial inputRS232C, 20 ma current loop. Baud rate 110, 150, 300, 600, 1200, 2400, 4800, 9600.Parity; odd, even, none. 115 VAC, 60 Hz. 5 watts. With 5 ft AC line cord. 5.5”W x 8”Dx.3.14”H. Order DB25P input connector separately.Part Number Weight Stock Price CMM2481/5 Paper tape panel printer 5 lb 1841 $ 1,019.00DB-25P input connector w/hood 1 lb 631M 20.004 ft cable to indicator, assembled w/connector 1 lb 710M 80.00Additional serial cable per foot 1 lb 711M 1.50

Options CBattery backup for Time & Date 2 lb 1399 209.00

Service Parts C10S215 ink ribbon purple 1 lb 1844 7.2510S216 roll paper 53 ft, 1 ply, 4300 lines/roll 1 lb 1842 3.50G15-7769 roll paper 2 part NCR 1 lb 1843 3.93

PLC Compatible printer is available.Model PLC80P is panel mountable, 24 column printer that is compatible with most PLC’scommonly available. A partial list includes GE Fanuc, Allen Bradley, Mitsubishi, KlocknerMoeller, Telemecanique, Eagle Signal. The printer will receive a signal from the PLC andprint one of 256 different 2 line event messages which would include the time & date.Call for price and availability





Epson Ticket Printer - TM-U29535 column dot matrix ticket printer will accept RS232 input, Has 4K data buffer. 7 pinshuttle impact dot matrix. Print speed 2.1 lines/sec. Max paper thickness 0.35mm. Onecolor cartridge ribbon. Characters are 1.6 x 2.9mm, 35 characters/line, 13.5 CPI, 2.6” printline. Order mating connector DB25P separately. 115/230VAC 50/60 Hz, 15 watts, 180 x190.5 x 101.5mmH.Part Number Weight Stock Price CTM-U295 Ticket Printer w/power supply 8 lb 2225 $ 565.00

Options C4 ft cable to indicator, assembled w/connector 1 lb 710M 80.00Additional serial cable per foot 1 lb 711M 1.50

TPC time & date printer controller (RS232 input) 5 lb 265M 714.0012 V battery converter to operator printer w/12 V battery 1 lb 2415 172.00

Service Parts CERC-27 Ink ribbon cartridge, purple 1 lb 2223 11.45ERC-27 Ink ribbon cartridge, black 1 lb 7162 11.45Also used in the following printers:Fairbanks 50-3930GSE SyntestToledo 8807

TM-U295 Printer w/o power supply 6 lb 2222 480.00Power supply 100-240VAC to 24VDC 2A 2 lb 2224M 83.95

w/power cord

TM-U295

Printers

SP298

TM-U590Ticket printer

Components

Epson TM-U590 Ticket Printer88 column dot matrix ticket printer with RS232 input. Has 4K byte data buffer. 9 pinshuttle impact dot matrix. Print speed 311 char/sec. Max paper thickness 0.3mm.Original and 4 copies. One color cartridge ribbon. Characters are 1.3 x 3.1mm and 1.6 x3.1mm, 12.5 and 16.7 CPI. Order mating connector DB25P separately. 120VAC 50/60Hz, 43 watts, 9.9”W x 10.5”D x 7.3”H.Part Number Weight Stock Price CTM-U590 Ticket Printer w/power supply 13 lb 2546 $ 945.00

Service Parts CERC-31 Ink ribbon cartridge, purple 1 lb 2729 15.75

Star Ticket Printer - SP29842 column dot matrix ticket printer will accept RS232 input. Has 512 byte data buffer. 9pin shuttle impact dot matrix. Print speed 3.1 lines/sec. Max paper thickness 0.2mmOriginal and 2 copies. One color cartridge ribbon. Characters are 1.2 x 2.42mm, 42characters/line, 16.9 CPI. Order mating connector DB25P separately. 115/230VAC 50/60Hz, 15 watts, 180 x 190 x 138mmH.Part Number Weight Stock Price CSP298 Ticket Printer w/power supply 8 lb 3282 $ 558.00

Options CTPC time & date printer controller (RS232 input) 5 lb 265M 714.004 ft cable to indicator, assembled w/connector 1 lb 710M 80.00Additional serial cable per foot 1 lb 711M 1.50

Service Parts CSP298 Printer w/o power supply 6 lb 3283 451.00Power supply 100-240VAC to 24VDC 2A 2 lb 2224M 83.95

w/power cord


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Printers

IDS160

I-Class I-4208 PrinterDirect thermal, optional thermal transfer printer. Die-cast aluminum frame. Metalconstruction, clear side window to easily monitor media supply levels. Keys are: PAUSE,FEED, CANCEL, MENU, TEST. Ten alphanumeric fonts. Fonts expandable vertically.and horizontally up to 24x, fonts and graphics can be printed in four directions: 0, 90, 180,270 deg. .PCX, .BMP, .IMG graphic files supported. Data Programming Language(DPL).Dual locking printhead. Auto-resetting board fuses. Split ribbon supply hub. Improvedfanfold capability. Color coded component cues. Flash memory. RS232C andCentronics Parallel ports included for host communication. 32 bit processor with 8MB ofmemory. Accelerated formatting and fast first label outputs. Resolutions up to 600 dpi.Print speeds up to twelve inches per second. Windows driver used for creating labelformats using any Windows based program. Centronics Parallel port, IEEE 1284compliant. RS232 at 2,400 to 38,400 BPS, optional Ethernet, USB and Twin/Coax. 120VAC, 47/63 Hz. 12.70”H x 12.62”W x 18.60”DPart Number Weight Stock Price CI-4208 Printer 45 lb 6776 $ 1,765.00I-4208 Printer w/ Rewind 45 lb 6777 1,987.00I-4208 Printer w/ Rewind/Peel/Present 45 lb 6778 2,201.00

Options CDatamax Peel/Present mechanism 1 lb 6779 215.00

I-4208

Industrial Data Systems Model 160 Tape printer - Serial inputDot matrix printer will switch easily from a slave printer to an intelligent printer. Slaveprinters will print only what is sent on the serial line. Intelligent printers will performcalculations and accumulate various totals. Tape printer has paper take up reel for windup of original or copy. 6 lines/inch, 3 lines/sec, characters are 0.12” high, 12 char/inchand selectable double wide 6 char/inch. Selectable header label can have up to 30characters of company name or other information. Up to 10 digits of sequentialnumbering. Station number 1 thru 9 can identify each printer. Print inhibit if no paper.Time & date print is selectable. Serial input is RS232 or 20 ma serial current loop, evenodd or no parity, 7 or 8 data bits, baud rates 300 thru 9600. Pulse inputs up to 48 VDCfor conveyor scales. 4K input buffer insures data will not be lost. Battery back up willkeep memory of time & date and totals up to 2 weeks. All other data is stored in EAROMso it will never be lost even if the battery fails. 120 VAC, 50/60 Hz, 90 watts,9”x12”x8.5”H.NTEP 89-129A1Part Number Weight Stock Price CIDS 160 Tape printer 23 lb 1950 $ 1,659.95IDS 160 Tape printer (24VDC) 23 lb 1914 1,659.95

4 ft cable to indicator, assembled w/connector 1 lb 710M 80.00Additional serial cable per foot 1 lb 711M 1.50

Service Parts CR11-000-02 ink ribbon for 160 Tape 1 lb 1631M 6.50





Printers

SP2200

NEWNEW

80251992


Condec - SP2200 Ticket Printer - Serial InputBidirectional dot matrix ticket printer will print whatever alpha and numeric data is sent viaRS232C or optional 20 ma current loop. Input buffer is 32K x 8K. Optional time and datewith battery backup. 40 characters per line at 12 cpi. 5 x 9 dot matrix. Normalcharacters are 0.1” high, enhanced 2X are 0.22” high and enhanced 4X are 0.45” high.Line spacing 6 lines per inch. Baud rates 300, 600, 1200, 2400, 4800, 9600, 19,200,parity 1 bit even is ignored by printer. 120 VAC 50/60 Hz, 15 watts, 8”W x 11”D x 7”H.Part Number Weight Stock Price B5SP2200 Ticket printer 15 lb 2377 $ 1,350.00SP2200 Ticket printer w/time & date 15 lb 2774 1,450.00

Options C4 ft cable to indicator, assembled w/connector 1 lb 710M 80.00Additional serial cable per foot 1 lb 711M 1.50Time & date w/battery backup 1 lb 4575 112.00

20ma serial current loop input 1 lb 4576 95.00Protective dust cover 1 lb 4577 72.00Centronics parallel interface adapter 1 lb 4578 183.00

Service Parts CInk cartridge 1 lb 1615M 22.50Maintenance manual 1 lb 4579 35.00Operating manual 1 lb 4580 35.00

80251992 Compact Thermal PrinterLight weight, compact thermal printer. Never needs a printer ribbon. Easy paper loading.Paper near end sensor. AC power adapter included. 3.9”W x 7.5”D x 3.5”HPart Number Weight Stock Price B80251992 Compact thermal printer 2 lb 7419 $ 387.00

Options B80251931 Thermal paper 1 lb 7420 8.0080252580 RS232 Cable & adapter, Voy/Exp 1 lb 7421 95.0080252581 RS232 Cable & adapter, Disc/Pion/MB 1 lb 7422 95.00

80252583 RS232 Cable & adapter, CD Troop 1 lb 7423 95.0080252584 RS232 Cable & adapter, CW/CKW/T 1 lb 7424 105.0080251930 adapter for Scout pro 1 lb 7425 15.00

Components


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Printers

NCI 1220

Citizen CBM-910II Dot-Impact PrinterPalm size dot-matrix printer. RS232 input 4800, 9600 baud, 8 bits, 2 stop bits. Paper endsensor. Bit image graphics. 24 column print width at 5 lines per second. 2K bytes inputbuffer. 8 data bits. Dimensions, 4.2”H x 7.1”W x 3.5”D. 115VAC 50/60 Hz.Part Number Weight Stock Price CCBM-910II Tape Printer w/power supply 5 lb 3417 $ 350.00

Options C4’ custom interface cable 1 lb 710M 80.00

Service Parts CC-0843-3 Ink ribbon cartridge, purple 1 lb 3782 12.651 ply roll paper 2.25” wide 1 lb 3783 5.002-ply roll paper 2.25” wide 1 lb 3784 7.50

iDP-3110

Citizen iDP-3535 Roll paper tape printerWill connect to Scales, Balances & Weighing Indicators. RS232 interface. It has an easyload long life cartridge ribbon and metal cutter bar. Two color printing, red & black.Enclosed paper roll virtually eliminates paper jams. Paper roll is 3” wide. Serial dotmatrix impact characters. 3 lines per second. 6.3”W x 7.2”D x 6.8”H. 120 VAC.Part Number Weight Stock Price CiDP-3535 Roll Paper Printer 7 lb 689 $ 339.00

Service Parts CIR-61RB ink ribbon cartridge for iDP-3535 1 lb 130 14.00P3.001 roll paper 3” wide, case of 50 rolls 50 lb 131 139.00

Citizen iDP-562 Service parts onlyService parts only.Part Number Weight Stock Price CService Parts C6N721-6 ink ribbon cartridge for iDP-562 1 lb 690 14.00P2.75-1 roll paper 2.75” wide 1 lb 691 3.50iDP-3535

NCI 1220 Dot Matrix Tape printer - Serial inputDot matrix printer will print on standard adding machine roll paper 2.25” wide withdiameter 2.75”. Selectable 24, 32 or 40 characters per line. Will print double width,inverted print, reverse print, graphic character sets, 144 dots per line. 1.5K buffer. Singleply paper. 7.6 lines per linch, character mode or 9.1 lines per inch, graphic mode.Optional time & date is available. Serial input is RS232. Even odd or no parity, 7 or 8data bits, baud rates 300, 600, 1200, 2400, 4800, 9600, 19,200. 120 VAC, 50/60 Hz, 1watt, 4”W x 4.5”L x 2.16”H.Part Number Weight Stock Price CNCI 1220 dot matrix paper tape printer 4 lb 2563 $ 320.00NCI 1220 dot matrix paper tape printer w/time & date 4 lb 2564 365.00

Options CRechargeable battery pack for NCI 1220 printer 1 lb 416 246.00

Service Parts C6N282-0 ink ribbon for NCI 1220 1 lb 2751M 7.25114815534 charger, 120VAC, 50/60Hz for NCI 1220 printer 1 lb 565 32.00





Printers

SRP-200

TM-U220

Components

Epson - TM-U220 Roll Paper Tape PrinterDot matrix tape printer has friction feed drive and will print on paper 3” wide with max dia3 1/4”. Has 1K data buffer. Includes separate 120 VAC power supply to provide thesmallest printer size. RS232 input, 4800, 9600 baud rates only, bidirectional printing, 40columns at 13.4 CPI, character size 1.2 x 3.1mm, 6 lines/inch, 3.5 lines/sec. * OrderDB25P input connector separately *. 120 VAC 50/60 Hz, 43 watts, 5 lb, 180 x 248 x133mmH, 7” x 9.8” x 5.2”H.Part Number Weight Stock Price CTM-U220 Tape Printer w/power supply 10 lb 2219 $ 385.00

Options CDB-25P Input connector 1 lb 631M 20.004 ft cable to indicator, assembled w/connector 1 lb 710M 80.00Additional serial cable per foot 711M 1.50

TPC time & date printer controller (RS232 input) 5 lb 265M 714.0012 V battery converter to operator printer w/12 V battery 2 lb 2273 200.00

Service Parts CERC-30 Ink ribbon cartridge for TM-U220 and SRP-270 1 lb 1839M 11.50Power supply 100-240VAC to 24VDC 2A for TM-U220 3 lb 5709 83.95

w/power cord1 ply roll paper 3” x 3”dia 1 lb 2221 4.602 ply roll paper 3” x 3”dia 1 lb 2228 6.80

Service Parts for old Model TM-U200 CPower supply 100-240VAC to 24VDC 2A for TM-U200 3 lb 2224M 83.95

w/power cord

Service Parts for old Model TRP265 CERC-23 Ink ribbon cartridge for TRP-265 1 lb 2220 10.95

SRP-270 Samsung Roll Paper Tape PrinterDot matrix tape printer has friction feed drive and will print on paper 3” wide with max dia3-1/4”. Has 6K data buffer. Includes separate 120 VAC power supply to provide thesmallest printer size. RS232 input, 7 or 8 data bits, 2400, 4800, 9,600, 19,200 baud ratesonly, bidirectional printing, 40 columns at 13.4 CPI, character size 1.2 x 3.1mm, 3.2lines/sec. Order DB25P input connector separately. 120 VAC 50/60 Hz, 25 watts, 177W x277D x 141mmH.Part Number Weight Stock Price CSRP-270A Tape Printer w/power supply 10 lb 3208 $ 290.00SRP-270C Tape printer w/power supply & auto-cutter 6 lb 3712 349.00SRP-270D Tape printer w/ps, take-up spool & auto-cutter 7 lb 3713 371.00

Options CTPC time & date printer controller (RS232 input) 5 lb 265M 714.004 ft cable to indicator, assembled w/connector 1 lb 710M 80.00Additional serial cable per foot 711M 1.50

Service Parts CERC-30 Ink ribbon cartridge for TM-U220 and SRP-270 1 lb 1839M 11.50Use roll paper for Model TM-U200

Service Parts (Old SPR-200) CInk cartridge for SRP-200 printer 1 lb 4039 11.00AC-1000A Power supply for SRP-200 series 3 lb 1707 30.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Printers

AD-1191

A&D Printers - Service SuppliesService Parts for Model AD-8115 Ticket PrinterPart Number Weight Stock Price CERC-03 Ink cartridge * 1 lb 42 $ 9.65

* Also used in Sterling 1100

AD-1191 A&D Compact printerThis printer is built for A&D equipment. Optional battery operation by an internalrechargeable battery pack. Uses standard low cost 2.25” calculator paper. Impact dotmatrix print head with easy change ribbon cassette. Up to 38 lines/min. 24, 32 or 40characters/line, 6x8 dot matrix, 2.6mm high. Input is RS232 300 to 19,200 baud.Includes (1) roll paper, paper cover, Manual, AC adapter. 4.2” x 7.7” x 3.5”H. 1.4 lb.Part Number Weight Stock Price CAD-1191 Printer 4 lb 1942 $ 445.00

Options CKO:1131 RS232 cable 25 pin to 25 pin 1 lb 221 28.50KO:577-200 RS232 cable 25 pin to 7 pin 1 lb 225 120.00AD-1191-09 Rechargeable battery pack for AD-1191 1 lb 2319 362.00







AD-8118A A&D Journal printerThese journal printers are suitable for both industrial and laboratory environments. Serialimpact dot matrix printing. High density 24 characters/line. Speed is 1.7 lines/second.Uses 60 mm roll of printer paper. Accumulation by code. Number capability. Clock withcalendar. Will connect with A&D Weighing Indicators and Electronic balances. Small DINsize enables easier panel mounting. Input is RS232 or 20 ma current loop serial at 600 or2400 baud.The AD-8118B Universal Printer will connect up to 4 weight indicators or scales with oneprinter. It will print Statistical Analysis including Maximum, Minimum, Average andStandard Deviation calculations.Part Number Weight Stock Price CAD-8118A Journal Printer 10 lb 1963 $ 1,045.00AD-8118B Universal Printer 10 lb 1593 1,249.00

Options COP-01 3 Channel serial input 1 lb 1588 629.00



AD-8118A

AD-8118B

AD-8121

Printers

Components

AD-8121 A&D Multi-Function printerThis printer is built for A&D Electronic Balances, Counting Balances, Platform Scales &Weighing Indicators(except the AD-4321). It prints charts and offers a full range ofstatistical functions on either AC or battery power. Serial impact dot matrix printing forsuperior readability. 5x7 dot, 0.1”H, 16 characters per line, 1 line/second. Uses 45mmwide 65mm dia 50m long roll of printer paper. A full range of statistical functions: Weightdata, Total weight data, Counting data, Total counting data, Number of operations,Standard deviation, Chart, Year, Month, Date, Hour, Minute and Second. Interval printingwith built-in Timer/Clock function: 5s, 10s, 30s, 1m, 5m, 10m, 30m. Charting selectable toshow change in weight, interval time, Start time and Stop time. Battery operation permitsuse anywhere. Includes AC adapter. Desk top mounting for convenience. Input isRS232 or 20 ma current loop serial at 600 or 2400 baud. Includes RS232 cable, rollpaper, (4) alkaline batteries, manual.Part Number Weight Stock Price CAD-8121 Multi-Function Printer 5 lb 1974M $ 799.00

Options CKO:1080-100 Current loop cable 1 lb 1989 77.00

Service Parts CWP:PP143 Roll paper, 2-5/8”dia x 1-3/4”wide, 2 lb 1990 22.00

pack of 5 for AD-8121ET:ERC-P05 Ink ribbon for AD-8121 1 lb 1991 20.00TB:174 Adapter 120VAC-DC 1 lb 4611 54.00


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Printers

Protocol ConverterBCD to Serial or Serial to BCD converter. This compact converter will change the serialprotocol in either direction. It is settable for either RS232 or 20 ma current loop. Baudrates are 1200, 2400, 4800, 9600. Odd or No parity. X-On/X-Off or CTS/RTS. ReadyNormal or Inverted. DAV Normal or Inverted. 30 BCD input/output lines. Serialconnector is 25 pin Sub D female. BCD connector is 37 pin Sub D female. Connectorsare not included and should be ordered separately. Power required is unregulated 6 VDCat 75 ma or regulated 5 VDC which is usually available from BCD devices. If 5 VDC isnot available the 6 VDC Power adapter can be used. The 6 VDC adapter will plug into a120 VAC outlet. 3.5”W x 3”D x 0.6”H.Part Number Weight Stock Price CPC-328 Protocol Converter w/6 VDC adapter 2 lb 1614M $ 655.00

Options CDB-25P connector 1 lb 631M 20.00DC-37P connector 1 lb 634M 23.00

Service Part C6 VDC Power adapter 1 lb 1736 29.00

Serial to BCD AdapterThis adapter allows BCD input Hecon printers to be used with the new indicators thathave serial output 20 ma or RS232C. Input is 25 pin connector. Enclosure is same size asstandard Hecon connector for 522 or 516. Setup switches give 4 baud rates, 7 or 8 databits, 4 parity modes, 1 or 2 stop bits, normal/inverted data, local/remote print control, fourinput formats.Part Number Weight Stock Price CSIA 522 for use w/Hecon AO 522 1 lb 1784 $ 293.00SIA 516 for use w/Hecon AO 516 1 lb 1785 293.00

6 VDCPower Adapter

PC-328

SIA





Printers

Okidata - 320 PrinterHeavy duty high speed dot matrix printer. Optional RS 232C.Part Number Weight Stock Price C320 Okidata turbo dot matrix printer 10 lb 1567 $ 570.00

Options CRS 232C Interface 1 lb 1568 135.00Cable RS232 to PC 25/9 pin 1 lb 1301 19.00

186

320

Okidata - 186 PrinterVersatile dot matrix printer will handle loose pages, roll paper or fanfold pin feed forms.Sprocket pins are spaced 9” apart. Multiple copies with adjustable head. Centronicsinterface. IBM compatible, Optional RS 232C with adjustable baud rate will support X-on/X-off.Part Number Weight Stock Price C186 Okidata Printer 13 lb 72 $ 488.00RS 232C Interface 1 lb 1637 151.00

Service Parts CInk cartridge 1 lb 788 15.15Print head for 182 1 lb 1638 175.00

Components


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

Fargo - PrintersService parts only.Part Number Description Weight Stock Price C694TM Ink ribbon Matrix II ticket 1 lb 713 $ 10.00Also used in the following printers:Eaton 7000,7040 Fairbanks 152Electroscale 330, 331 Toledo 8805

Ink ribbon SP-2000, 2000 ticket 1 lb 1615M 22.50Also used in the following printers:Sterling 1500Weightronix WP-240

650TC Ink ribbon Matrix II tape 1 lb 714 5.85Also used in Toledo 8855 ticket printer

Roll paper tape 3-7/8” wide, one ply, 1 lb 715 4.90165 ft, 3-3/16” dia

Printers

Control Logic Printers - Service SuppliesService parts onlyPart Number Weight Stock Price CService Parts for Model 250 Ticket PrinterR05-101-03 ink ribbon, purple 1 lb 1613M $ 7.75Print/Tare switch assy w/connector 1 lb 1628 25.00Switch alone, solder tabs 1 lb 1629 9.00

Service Parts for Model 260 Tape PrinterR11-000-02-NY ink ribbon, black, C wind 1 lb 1631M 6.50Print/Tare switch alone, solder tabs 1 lb 1629 9.00Roll paper tape, 3” wide, 1 ply, 3” diameter 1 lb 1633 2.75

Service Parts for Model 1200 Ticket PrinterR05-101-03 ink ribbon, purple 1 lb 1613M 7.75

Hecon - 543 Tape PrinterService parts only.Part Number Weight Stock Price CService Parts99 003 376 ink ribbon, black 1 lb 706 $ 7.00

99 003 374 roll paper 105 ft 2 ply 1 lb 703 10.30





Toledo - Ticket PrinterInk cartridge ribbon 115534300A for Toledo Printer Model 88067/16” x 12 yds purple matrix.Part Number Description Weight Stock Price COld styleEC867-(C-621) Ink ribbon 1 lb 724 $ 23.25Also used in the following printers:Cardinal 740 General TP-110Eaton 4000 NCI 5787Fairbanks 50-3925 Weightronix WA-220Flexweigh DHP4000

New style with plastic ribbon guides6N443-0 Ink ribbon 1 lb 704 21.20In an emergency, the new style ink ribbon cartridge can be used with the old style #8806printer. The new style plastic guides can be removed by snapping them off. The newstyle ink ribbon without the guides is the same as the old style EC867 ink ribbon and willwork with the old style 8806 printer.

Ink ribbons and cartridges for other makes and models of printers are available.

EC867

Printers

Industrial Data Systems 150/152 Ticket printer - Serial inputService parts onlyPart Number Weight Stock Price CService Parts CR05-101-03 ink ribbon for 150/152 Ticket 1 lb 1613M 7.75

Components


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

J Box



Components

SJB-4-SS

SJC-4

TJB61 8”L x 3.25”W x 4.5”H

TJB62 7.75”L x 2.5”W x 1.75”H

SJB-4 with Excitation trimNEMA 4 Stainless steel enclosure contains circuit card which is arranged for parallelsumming of 2 to 4 load cells. Box is gasketed with hinged cover for easy access. Fivecorrosion proof nylon strain reliefs are provided for cable 0.197”- 0.354” dia. Ideal formaking corner sensitivity adjustments for scales. Convenient, lugless connections for loadcell and readout. Two pots provided for each load cell to minimize interaction betweenspan trimming and zero shift. Separate terminal block for each cable. Internal connectionof sense to excitation leads. Common shield connection provided for each cable. Lowresistance (10 ohm), 20 turn pots for good resolution. Mounting hardware provided withcards allows card to be tilted up on hinges for easy pot adjustments. Size 6.5” x 6.5” x2.5”hPart Number Weight Stock Price DSJB-4-SS Stainless steel NEMA 4 4 lb 280 $ 313.00enclosure, containing summing card.

SJC-4 Summing card only 1 lb 461 176.00

UniBridge with Excitation trimCompact, stainless steel junction box with summing card. Box is 9.5”L x 2.5”W x 2.5”H.Card is 6.5”L x 1.5”W x 1.25”H. Up to four cells will be summed. Two cable strain reliefs.Part Number Weight Stock Price CJ-box w/summing card UniBridge 4 lb 998 $ 341.00J-box only w/o card UniBridge 1.8 lb 3 lb 997 201.00Summing card only (4 cell) UniBridge 1 lb 996 140.00

TJB61 Summing box with Card - TotalcompThe 61 and 62 Summing Card is 1-3/8” x 5-3/4”. It has four 5 position terminal strips forload cell inputs and one 7 position terminal strip with internally jumped sense terminals foroutput to the instrument. Terminal strips are screw operated cage clamp design oroptional lever type design.Trimming of signal output is accomplished with four 25 turn trim pots with an operatingtemperature range of -55 to +125 degrees C. The board will sum 2 to 4 load cells andcan be mounted with the four 11/16” mounting holes provided with a spacing of 2-1/2 x 3-1/2” on center.Part Number Size Weight Stock Price CTJB61 Summing box w/ card 8”L x 3.25”W x 4.5”H 1 lb 4593 $ 162.00Enclosure only for TJB61 1 lb 4592 104.00Circuit card only for TJB61 & TJB62 5.75”L x 1.375”W x 0.75”H 1 lb 4591 58.00

TJB62 Summing box w/ card 7.75”L x 2.5”W x 1.75”H 1 lb 3578 164.00Enclose only for TJB62 1 lb 3579 108.00

Summing Card

J-Box


J Box




Components

Compact summing junction boxCompact junction box with Signal trim for 4 load cells. Signal trim has one multiturnpotentiometer per load cell that shunts the output and two series output isolation resistorsthat limit zero interaction. Optional Excitation trim is available. Excitation trim has onepotentiometer per load cell in the excitation circuit for adjusting the load cell input voltage.Terminal blocks are lever type that simplify wire connection. Strip the wire, push the lever,insert the wire and release the lever. Accepts wire size 26 to 14 AWG. Five nylon strainreliefs are included for load cells & instrument cables. Two screws that hold the coverhave drilled heads for lead and wire sealing. Stainless steel NEMA 4 box and gasketedlid for corrosion resistance. The small size of this box makes it a good replacement forlow profile warehouse scales. In many cases the box will fit under the platform. 7” x4.625” x 1.75”h, 2 lb.Part Number Weight Stock Price DCSB-40 w/Signal trim 3 lb 1787 $ 219.00CSB-40E w/Excitation trim 3 lb 2434 219.00

CSB Summing card only, signal trim 1 lb 1584 139.00CSB-E Summing card only, Excitation trim 1 lb 285 139.00

Signal Trim Series 1200 Summing Junction BoxStainless Steel Nema 4 enclosure contains printed circuit card specifically designed toadjust each load cell span without effecting zero. One multiturn potentiometer per loadcell shunts the output and two series output isolation resistors limit zero interaction.Terminal blocks are lever type that simplify wire connection. Strip the wire, push the lever,insert the wire and release the lever. Accepts wire size 26 to 14 AWG. One terminalblock for each load cell and one terminal block for the indicator. Expansion terminal blockis on models 1250, 1251 and 1260 for expansion to another summing box. Spanadjustment is 3% for 350 ohm load cells; 5% for 700 ohm load cells. Corrosion proofnylon strain reliefs are provided for cable 0.197”-0.354” dia. Enclosure size is 6-1/2” x 8-3/8” x 1-3/4”H. Circuit card size is 4-7/8” x 6-3/4” x 5/8”H.Section Adjustment1251, 1260, 1280, 12100 circuit cards have section adjust pots for ease in scalecalibration. First the two cells in each section are matched, then the sections arematched with the additional section pots. Both cells in a section should have load cells. Ifone load cell is not wired to a section, resistors should be connected that have anequivalent resistance.Part Number # Cells Weight Stock Price DStainless Steel NEMA 4 enclosure w/summing card1250-4-SS 2 to 4 4 lb 1007 $ 331.001251-4-SS 2 to 4 4 lb 1051 346.001260-6-SS 5 to 6 4 lb 1008 388.001280-8-SS 7 to 8 5 lb 1009 420.0012100-10-SS 9 to 10 5 lb 2955 531.00

Summing card only1250 Card only 2 to 4 1 lb 620 153.001251 Card only 2 to 4 1 lb 1049 168.001260 Card only 5 to 6 1 lb 622 213.001280 Card only 7 to 8 1 lb 624 243.0012100 Card only 9 to 10 1 lb 667 325.00

Stainless Steel NEMA 4 enclosure w/summing card w/surge protection1250-4-SS-SP 2 to 4 4 lb 4229 377.001251-4-SS-SP 2 to 4 4 lb 4230 391.001260-6-SS-SP 5 to 6 5 lb 4231 430.001280-8-SS-SP 7 to 8 5 lb 4232 461.0012100-10-SS-SP 9 to 10 5 lb 4233 572.00Summing card only w/surge protection1250-SP Card only 2 to 4 1 lb 4234 198.001251-SP Card only 2 to 4 1 lb 4235 213.001260-SP Card only 5 to 6 1 lb 4236 255.001280-SP Card only 7 to 8 1 lb 4237 288.0012100-SP Card only 9 to 10 1 lb 4238 369.00Enclosure without card1250B/1251B Enclosure only w/(5) strain reliefs 4 lb 1310 181.001260B Enclosure only w/(7) strain reliefs 4 lb 1313 181.001280B Enclosure only w/(9) strain reliefs 4 lb 1314 187.0012100B Enclosure only w/(11) strain reliefs 5 lb 2956 193.00

1250 card only

1260 card only

1280 card only

CSB card onlyCSB-40

1250-4-SS

1260-6-SS

1280-8-SS

12100 card only12100-10-SS


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

J Box



Components

Summing card for floor scalesReplacement part for use in floor scales. Includes velcro mounting tape for attaching tojunction box cover. Excitation trim with one potentiometer for each load cell. Screwterminals for secure wire connections. Dimensions 1” x 4.5” x 0.75”Part Number Weight Stock Price C10500 Summing card excitation trim 1 lb 682 $ 91.00

General Sensor compact summing junction boxExtremely small junction boxes with Signal trim for 4 load cells. One multiturnpotentiometer per load cell that shunts the output and two series output isolation resistorsthat limit zero interaction. Screw terminals simplify wire connection. Accepts wire size 26to 14 AWG. Five nylon strain reliefs are included for load cells & instrument cables. Bothboxes are NEMA 4X and gasketed for corrosion resistance. The GS-JB-4-SS is made ofstainless steel and the GS-JB-4-FRP is made of fiberglass reinforced plastic. The smallsize of these boxes make them a good replacement for low profile warehouse scales. Inmany cases the box will fit under the platform. 7” x 4.625” x 1.75”h.Part Number Weight Stock Price DSignal trimGS-JB-4-SS stainless steel 3 lb 4013 $ 194.00GS-JB-4-FRP fiberglass reinforced plastic 1 lb 4014 96.00DS-JB-4-SS Diamond Summing box 4 cell SS 2 lb 32 125.00

Excitation trimGS-JB-4-E-SS stainless steel 3 lb 4790 194.00GS-JB-4-E-FRP fiberglass reinforced plastic 1 lb 4791 96.00

Summing card onlyGS-SC Sum card only, 4 channel, signal trim 1 lb 4015 65.00GS-SC-E Sum card only, 4 channel, excitation trim 1 lb 635 65.00

Enclosure without cardGS-JB-SS Enclosure only 1 lb 4047 108.00

Surge Protection spare partsFor use with 1250-SP Surge protection summing cards and boxes.Part Number Weight Stock Price CGT-B675L Lumex tube surge protector 1 lb 575 $ 10.70

GS-SC cardonly

GS-JB-4-SS

GS-JB-4-FRP

GT-B675LLumex Tube

10500Summing card replacement

DS-JB-4-SS

NEWNEW


J Box




Components

Strain reliefsUsed to connect load cell cable to summing junction boxes or instrument enclosure. 1/2”hub size for 7/8” dia hole. Aluminum with rubber cable bushing, “O” ring gasket andlocknut. Connector is installed with “O” ring gasket on outside of box for watertight fit.Lock nut holds from inside. Knurled collar compresses bushing around cable for watertightfit and relief of strain on cable inside box.Part Number Cable Diameter Weight Stock Price CCG-1250 0.125”-0.187” 1 lb 625 $ 9.10CG-1850 0.187”-0.312” 1 lb 626 9.10CG-3150 0.312”-0.437” 1 lb 627 9.10

Corrosion proof strain reliefsNylon strain relief with neoprene gland resists salt water, weak acids, gasoline, alcohol,oil, grease and common solvents. 1/2” hub size for 7/8” dia. hole. Sealing washer and locknut.Part Number Cable Diameter Weight Stock Price C3231 0.170”-0.470” 1 lb 1010 $ 7.10

Conduit adapterMount on the cable fitting on Sensortronics Tank Mount and Truck load cells. The external1/2” NPT will connect to standard conduit and adapters.Part Number Weight Stock Price C30006-A Small conduit adapter 1 lb 348 $22.00

Hole plugSeals unused 7/8” dia. holes in summing junction box or instrument enclosure. Cover diskis gasketed with internal washer and wing nut for tight seal.Part Number Weight Stock Price CAS050 epoxy painted steel 1 lb 194 $ 7.10AS050SS stainless steel 1 lb 414 23.00

CG-1250

3231

AS050

30006-A

Cheque por fax/emailAgilizan sus ordenes de compras

En Totalcomp ahora tenemos el nuevo sistema de cheques por faxque permitira el despacho de los productos el mismo día. Tambienagiliza los pagos de facturas vencidas, y ahorra gastos detransferencia y de courier cuando envian un cheque a nuestrasoficinas.

Como trabaja?

Ustedes consiguen un cheque de un banco local con nexosbancarios Norteamericanos en Dólares Americanos y lo envían víafax a Totalcomp, con una autorización firmada por el dueño de lacuenta que diga lo siguiente:

Este cheque autoriza cargar a nuestra cuenta la suma de $_____

Una vez que lo tengamos tomaremos el número de cuenta delcheque, el número de tránsito y el número MICR que identifica elbanco original. Luego imprimimos un cheque con esos datos y lodepositamos normalmente. Esta transaccion es completamentelegal y es permitida en los Estados Unidos.

Una vez que tengamos el cheque por fax podremos despachar elmismo día. Ustedes se ahorran los gastos de DHL, FEDEX,tranferencia, o cargos del 2.8% cuando pagan con Visa oMasterCard.

Western UnionSeremos notificados 24 horas despues de su pago con el sistemade Quick Pay o Pago Rápido (México no aplica para este servicio).Siga las siguientes instrucciones.

Seleccione en la lista que incluimos el teléfono de Western Unionen su pais. Averigüe la oficina de Western Union en su ciudad queofrece el servicio de Quick Pay o Pago Rápido, porque no todas lasoficinas de Western Union lo ofrecen.

Proveer la siguiente información en el formulario azul del serviciode Pago Rápido:

Companía: Totalcomp Inc.Código: SCALES, NJ

Este código es la información mas importante.País: Estados Unidos

La otra información requerida es la que regularamente ustedesproveen cuando hacen una transferencia bancaria.

Costos del Servicio:De $0,00 a $3.000,00 Dólares cuesta $15,00 DólaresDe $3.001,00 a $5.000,00 Dólares cuesta $25,00 Dólares

Lista de telefonos de Western union en Latino America:Argentina (4) 323-4270Belice (2) 70014Bolivia 0811 7777Chile 800 200 102 y 800 80 2727Colombia 9800 934476Costa Rica 800 777 7777Ecuador (02) 508 085El Salvador 298 1888Guatemala (02) 751 41Haiti 223 2084 et 229 5900Honduras 232 9996Jamaica 926 2454Nicaragua (2) 221 332Panamá 800 2274Paraguay (21) 221 332Perú 0800 12 080 y 0800 20 007Puerto Rico 800 325 4045Rep. Dominicana 1 200 1163St Lucia 452 4191St Maarten 22 403St. Vincent 456 2016Suriname 42 11 42Uruguay 0800 2024 y 0800 2026Venezuela 800 34598 y 800 22782


Fair Lawn NJ 07410201-797-2718 * 800-631-0347



Components

FormasDePagoTransferencias BancariasDespacho se hará cuando el dinero se reciba. Tránsito bancariosegún el FDIC de los Estados Unidos por ley es de 3 a 4 días. Asíel banco prometa que estará en los USA el mismo día por ley elbanco local hace los fondos disponibles al tercer día de haber sidoefectuada la transferencia.

Banco Vallley National BankDireccion 20-24 Fair Lawn Ave

Fair Lawn NJ 07410 USACuenta No Llamenos para obtenerlaABA No 021201383

Estimado Cliente tener en cuenta que: El banco intermediariousualmente cobra US$15.00 por servicios bancarios que sonextraídos automaticamente del dínero que es enviado. Este pagoes independiente del que ustedes hacen en el banco de su país yTotalcomp Inc. no tiene ninguna injerencia en ello. A nosotros nosllega la cantidad que ustedes envían menos $15.00. El banconunca nos notifica si han extraído dinero por sus servicios. Por losmotivos anteriores, nosotros nada mas acreditamos a su cuenta lacantidad recibida.

Tarjetas de CréditoEl despacho se hará el mismo día

Solo aceptamos VISA y MASTERCARD

Nota: Proveer siempre el número de cuenta y la Fecha deVencimiento.

Estimado cliente tener en cuenta que: Mastercard y Visa cobran el3.15% (antes era 3.15% y a partir de Nov 2006 subió a 3.15%) mas$0.90 Centavos por transacción. Estos costos serán agregados asu factura.

Con ChequeCheque de banco de USA o Money Order.

Despachamos cuando el cheque arribe a nuestras oficinas. Porejemplo si lo envián por servicio courier como DHL o FedEx, elcheque llegaría en 2 o 3 días a Totalcomp.

Cheque a nombre de: Totalcomp, Inc.

Envarlo a: Totalcomp Inc.13-01 Pollitt Dr ExtFair Lawn, NJ 07410USA





Terms

Fax on DemandCall 201-398-1000 from your fax machine to obtain a list ofavailable documents. You will immediately receive your request.

Calibration instructions are available for:A&D SartoriusCAS TotalcompDoran TranscellOhaus

Sales literature is available on the following manufactures:A&D ScaimeCAS SensortronicsDoran TedeaHBM TotalcompOhaus

TermsYour choice of payment.

1. Check or money order with order.

2. Net 30 days for approved credit customers. If you desire aTotalcomp charge account, simply request a credit application withyour next order (or at any time) and we will ship your order whenyour credit is approved.

3. C.O.D. will be delivered by UPS or Federal Express. They willcollect total charges which will include merchandise, freight andhandling.

Prices are FOB Fair Lawn, New Jersey or FOB Factory and aresubject to change without notice. Orders will be filled with prices ineffect at the date of shipment.Minimum order is $20.00 excluding shipping charges.

StockYour components will be shipped within 24 hours from when wereceive your order.We normally carry an ample supply of every item on our stock shelf.It is very infrequent that our supply is depleted to zero due tounusual requests from our other customers.

ShippingU.P.S. . . . . . . . . . . . . .Your order will be shipped U.P.S.

whenever possible, unless you request adifferent method of shipment. Maximum150 lbs per carton.

U.P.S. 2nd day air . . . .Air freight via U.P.S. It is a guaranteed 2-day delivery not including Saturday orSunday.

U.P.S. Next day air . . .Air freight via U.P.S. It is a guaranteed 1-day delivery not including Sunday.

R.P.S . . . . . . . . . . . . . .Roadway Parcel Service is similar to UPSwith a maximum weight of 150 per carton.

Express mail . . . . . . . .Air freight via U.S. Postal Service.Guaranteed next day delivery not includingSunday.

Air Freight . . . . . . . . . .Air freight via Federal Express, EmeryExpress, AirBorne and other independentair cargo service. Normally next dayservice. Extra cost for Saturday delivery.No Sunday deliveries.

Truck . . . . . . . . . . . . . .When shipping load cells and other partsby truck specify shipping class asSCALES NOI CLASS 85.

WarrantyYour Customer Warranty is the standard manufacturer’s warranty,which is normally 1 year from date of shipment.

No prior return authorization is required.

Return to us the defective items. Enclose a note with the modelnumber, serial number, invoice number and date of purchase and abrief description of defect.

Defective part will be forwarded to the manufacturer for evaluation.Customer will be advised of the status.

No credit will be issued unless offered by the manufacturer.

Return PolicyAll merchandise must be authorized prior to return. No return will beaccepted without a Return Authorization Number, except forwarranties.

If the wrong part was ordered:1. A 20% restocking charge plus shipping charges will apply.2. The merchandise being returned must be returned within

2 weeks of original shipping date.3. The Merchandise being returned must be unused and

received in new condition. If merchandise appears to havebeen used or received in poor or damaged condition, arefurbishing charge will be applied before credit is given.

If the wrong part was shipped:1. The correct merchandise will be shipped at once.2. Full credit will be issued upon return of incorrect

merchandise.

Damaged in ShipmentMerchandise that has been damaged in shipment must be reportedto the freight carrier immediately.

Do not return the merchandise until after the freight carrier hasinspected the damage. Keep all the original packaging material forthe inspection. The freight carrier will not honor a claim for damageif the merchandise is not as you received it.

After the freight carrier has inspected the damage and has given usapproval, we will give you a Return Authorization Number.

Components


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Index



1

10500: 1541200: 1501200 Summing Junction Box: 1531220: 1441222: 1011222T: 1011222W: 1011250-4: 1531250-4-EXP: 1151270: 971270T: 971270W: 971334: 100134: 851370: 9617237: 83180: 17186: 149

2

200: 1820250X: 36204: 19205: 20210: 21210F: 222165: 75220: 232200B: 29232CL4 Converter: 138250: 35, 150260: 150260ISA: 112260ISB: 1122781: 75

3

30006-A: 155311-01: 108320: 1493231: 155341: 108350: 37

4

403DSC: 864058G: 1244300M: 30433: 125463: 125

5

51013-16: 109543: 150

5612: 7557: 66

6

660: 40665: 40

7

72-N1: 687228: 1077400+: 557400M: 317500: 567600: 587600E: 57

8

8000IS: 1108000XLM: 3280251992: 14380252042: 139814: 858158: 1048158T: 1058158W: 106

9

9000XL/IS: 1119072: 999072T: 999072W: 99911: 859280: 98

A

A&DA&D, AD-1191: 146A&D, AD-4322A: 4A&D, AD-4323: 5A&D, AD-4325A: 6A&D, AD-4326: 7A&D, AD-4327: 8A&D, AD-4328: 9A&D, AD-4329: 10A&D, AD-4401: 11A&D, AD-4402: 12A&D, AD-4405: 13A&D, AD-4406: 14A&D, AD-4407: 15A&D, AD-5000: 16A&D, AD-8115: 146A&D, AD-8118: 147A&D, AD-8118A: 147A&D, AD-8121: 147A&D, AD-8920: 132

Absolute Process, 4058G: 124AC Monitor: 90ACM120: 90AD-1191: 146AD-4321: 3AD-4322A: 4AD-4323: 5AD-4325A: 6AD-4325V: 6AD-4326A: 7AD-4327: 8AD-4328: 9AD-4329: 10AD-4401: 11AD-4402: 12AD-4405: 13AD-4406: 14AD-4407: 15AD-5000: 16AD-8115: 146AD-8118: 147AD-8121: 147AD-8920: 132AD101: 123Adapters: 75AED9001: 123Analogic, AN-5316: 64Analogic, ITG3030: 64APLSG: 118Armor braid cable: 69Armor braid load cell cable: 69AS050: 155

B

Bar Code: 134, 135, 136, 137,138Beam feet: 80, 82Bonding Braid: 88Brass Mass: 109

C

Cable: 66, 67, 68, 69Cable 4 conductor: 69Cable 6 conductor: 69

CardinalCardinal, 180: 17Cardinal, 200: 18Cardinal, 204: 19Cardinal, 205: 20Cardinal, 210: 21Cardinal, 220: 23Cardinal, Remote Display: 131

CASCAS, CI-2001: 24

CBBF: 80CBM-910I: 144CD11: 48

CD31: 49CG-1000: 94CG-1250: 155CI-2001A: 24CI-2001AS: 24CI-2001B: 24CI-2001BS: 24

CitizenCitizen, CBM-910II: 144Citizen, iDP-3535: 144Citizen, iDP-562: 144

CKW55: 52Clevis: 70CMJ-CE: 121Compact summing junction box:153

CondecCondec, SP2200: 143Condec, UMC222: 25Condec, UMC555: 26Condec, UMC600: 27Condec, UMC600IS: 114

Conduit adapter: 155Connecting Links: 73Connectors: 66, 67converter: 138CRCC1272: 108CS31: 33CSB-40: 153CW11: 50

D

D3640: 119D3720: 120D3722: 120DA: 66

DatamaxDatamax, I- 4206, I - 4208, I -4212: 135Datamax, I-Class I-4208: 142

DB: 66DBF: 82DC: 66DD: 66DDC9600: 137DE: 66

DoranDoran, 2200B: 29Doran, 4300M: 30Doran, 7400M: 31Doran, 8000IS: 110Doran, 8000XLM: 32Doran, 9000XL/IS: 111

Components


Index




Doran, DS100: 28

DS100: 28DTR-304: 92DWM-IV: 34

E

Easy Link: 133EBF1420: 80EC867: 151

Electro-NumericsElectro-Numerics, EN45P: 132

EltronEltron, LP-2022/2042: 134

EM2025: 88

EmeryEmery, 260IS: 112EN45P: 132Enclosure: 86

EpsonEpson, TM-U220: 145Epson, TM-U295: 141Epson, TM-U590: 141

Explosion Proof Junction Box:115Eye Bolts: 73Eye Nuts: 71

F

First-WeighFirst-Weigh, CS31: 33

FlexWeighFlexWeigh, DWM IV: 34

Foot Retainer: 78Formas De Pago: 156FR: 78

G

G120D10: 117GE525: 39

General SensorGeneral Sensor: 154General Sensor, GSR: 130

Ground Strap: 88GS-JB-4: 154

GSEGSE-350: 113GSE-355: 113GSE-460: 38GSE-465: 38

GSE, 250: 35, 36GSE, 350: 37GSE, 350-IS & 355-IS: 113GSE, 460: 38GSE, 465: 38GSE, 660: 40GSE, GE525: 39GSE. 665: 40

GSR: 130

H

Hand Truck: 94Hazardous: 110, 111, 112, 113,114, 115, 116

HBMHBM, AD101: 123HBM, KVM: 68

HC-500: 94High performance load cell cable:69Hole plug: 155

I

I-4208: 142IDe 100: 45, 46IDe 400: 47IDe, 400 Truck Weigh Indicator:47iDP-3535: 144iDP-562: 144IDS 160: 142IDS 410: 41IDS 422: 41IDS 430: 42Ids, 160: 142IDS, 410 & 422: 41IDS, IDS 160: 142IDS, IDS 410: 41IDS, IDS 430: 42Indicators: 1, 2, 3, 4, 5, 6, 7, 8, 9,10, 11, 12, 13, 14, 15, 16, 17, 18,19, 20, 21, 22, 23, 24, 25, 26, 27,28, 29, 30, 31, 32, 33, 34, 35, 36,37, 38, 39, 40, 41, 42, 43, 44, 45,46, 47, 48, 49, 50, 51, 52, 53, 54,55, 56, 57, 58, 59, 60, 61, 62, 63,64Industrial Data Systems, 150/152:151Insulated tension mountingassembly: 72Insulators: 75

IntercompIntercomp, S400: 131Intercomp, S400 and SA2000Remote display: 131Intercomp, S480: 131Intercomp, SA2000: 131

Intrinsic Safety Barrier: 116

J

J Box: 152, 153, 154, 155J-box: 152Jam Nuts: 79Jam Nuts, Stainless steel: 79

K

KeltronKeltron, MM2481: 140

KVM: 68

L

LC1200: 88LCP-1: 86LCT-01: 92Lead and wire seals: 85Links: 73Load: 77Load button: 77Load cell cable: 69Load cell insulators: 75LP-2824-S: 135LP-2844: 135LP2022: 134LS606M: 88

M

Magic 20: 44Magic Indicator: 43Mark III-P: 87

MasterKMasterK, IDe 100: 45, 46MasterK, Magic: 43MasterK, Magic 20: 44

Matrix II: 150MM2481: 140Moisture problems: 84Mounting: 70, 71, 72, 73, 74, 75,76, 77, 78, 79, 80, 81, 82Mounting Plate: 78MS3101A: 67MS3102A: 67MS3106A: 67MTL-4: 116MW2001: 63

N

NBF: 82

NCINCI, 1220: 144

NM-44B: 68

O

OhausOhaus, 80251992: 143Ohaus, 80252042: 139Ohaus, Brass Mass: 109Ohaus, CD11: 48Ohaus, CD31 and CD33: 49Ohaus, CKW55: 52Ohaus, CW11: 50Ohaus, Defender 5000: 54Ohaus, T31P & T31XW 3000: 51,53

OkidataOkidata, 186: 149Okidata, 320: 149

OvationOvation: 136Ovation! 2, Bar Code: 136

P

Panel weight indicator: 119, 120PC-328: 148

PennsylvaniaPennsylvania, 7400+: 55Pennsylvania, 7500: 56Pennsylvania, 7600: 58Pennsylvania, 7600E: 57

Power: 86, 87, 88Power supplies: 117Power supply: 117Power supply cord: 83Printer: 139Printers: 140, 141, 142, 143, 144,145, 146, 147, 148, 149, 150,151Process: 117, 118, 119, 120, 121,122, 123, 124, 125, 126, 127

ProdigyProdigy Max: 136Prodigy Plus: 136

Protocol Converter: 148Pushbutton Station: 117PVC Junction Box: 68PW3110: 88

Q

Quick link: 76

R

R05-101-03: 151RBF: 82Relay: 117Remote: 128, 129, 130, 131, 132,133

Components


Fair Lawn NJ 07410201-797-2718 * 800-631-0347

Index



Remote Display: 130Rod Ends: 70Rod Ends with electrical isolation:70

S

S400: 131S480: 131SA2000: 131

SamsungSamsung, SRP-270: 145

SB500: 131

ScaimeScaime, CMJ-CE: 121

Scale foot: 80Scotchcast, 72-N1: 68Sealing press: 85Security Seals: 85Serial to BCD Adapter: 148Shackles: 76SIA: 148Silica Gel: 84SJB-4: 152Smart Remote display: 128, 129Soldering Station: 84Sorbit-2: 84SP2200: 143SP298: 141Spacer for beam cells: 78Spherical Washer: 76Splice kit: 68Splicing kit: 68SRP-270: 145SSI-ICLASS-203Q: 135ST-1015: 75stainless steel: 74, 152Stainless Steel Eye Bolts: 73Stainless Steel Rod Ends: 70Star, SP298: 141Strain reliefs: 155Summing card: 154Supplies: 83, 84, 85

T

T belting: 65T Belting: 65T-Belting: 65T-Grip: 65T-Grip belting: 65T31P ABS: 51, 53, 54T31XW SS: 51, 54T3540: 117T4715: 126T4720-D: 126T500E: 1, 2T500ESS: 1TAA: 71

TBS: 78TC1/2-20/13-5.5: 74TC1/4-28/20: 74TCM1: 127TDLC: 122Tedea, LCT-01: 92Tension Alignment Assembly: 71Tension cable: 74Metric: 74Zinc plated: 74Tension Load Cell Thread Sizes:IBC1Tension mounting assembly: 71Tension Mounting Bolt: 72Tension mounting bolts: 72Terms: 157

TescoTesco, Mark III-P: 87

Test: 89, 90, 91, 92, 93Test Weight Hand Cart: 94Test Weight Hand Truck: 94Test Weight Tree: 94Test weights: 99, 104, 105, 106,107, 108Threaded adapters: 75TI-1500E: 61TI-1520E: 61TI-1600: 62TI-1620E: 62TI-500SSB: 59TI-600ESS: 60TIK: 85TJB61: 152TLP-2824-S: 135TLP-2844: 135TM-U200: 145TM-U295: 141TM-U590: 141TMA: 72TMB: 72

TotalcompTotalcomp, 433: 125Totalcomp, 463: 125Totalcomp, Analog to DigitalConverter: 122Totalcomp, DDC9600: 137Totalcomp, DDC9600 SE: 137Totalcomp, Smart Remotedisplay: 129Totalcomp, T4710: 126Totalcomp, T4715: 126Totalcomp, T500: 1Totalcomp, T500P: 2Totalcomp, TCM1: 127Totalcomp, TJB61: 152Totalcomp, TPC: 138Totalcomp, TPC Time & Dateprinter: 138Totalcomp, TSR: 128, 129

Totalcomp, TYJ-360-D: 139TPC: 138

TranscellTranscell, TI-1500E: 61Transcell, TI-1600: 62Transcell, TI-500SSB: 59Transcell, TI-600E: 60

Transducer simulator: 93Transient load cell protector: 86Tripp Lite, Line Conditioner: 88Troemner, Analytical Weights:107

TroemnerTroemner, Brass Weights: 108Troemner, Calibration Weights:104, 105, 106Troemner, Clean Room Cases:108Troemner, Test Weights: 96, 97,98, 99, 100, 101, 102, 103

TS-0V: 93TS-101: 91TS-16: 93TS-16V: 93TS-350: 92TS-6: 93TS-8V: 92TSK: 68TSR: 128, 129TW-100-01: 102TW-15: 103TW-30: 103TW-50: 103TW-5000-01: 102TW-50COMBO: 103TYJ-360: 139

U

UMC222: 25UMC555: 26UMC600: 27Uninterruptable Power Supply: 88UPS: 88

W

WeighTechWeighTech, MW2001: 63

Weights: 94, 95, 96, 97, 98, 99,100, 101, 102, 103, 104, 105,106, 107, 108, 109

Western WeighWesten Weigh, Aurora 45 SL:130Western Weigh, Aurora 20: 130Western Weigh, Aurora 45: 130

Western Weigh, Aurora 65 SL:130

WF: 80Wireless Communication: 133WLC100: 84WT-500A: 94

Z

ZebraZebra, 2824 & 2844: 135

Components

IBC113-01 Pollitt Drive ExtFair Lawn NJ 07410201-797-2718 * 800-631-0347



Tension Load Cell Thread Sizes

Model 1/4-28 3/8-24 1/2-20 3/4-16 1-14 1 1/4-12 1 1/2-12 2-12 2 1/2-12 3-8 4-8

USP 100-250 500-2.5K 5K-10K 25K 50K 100K 200K-300K

T3P1 500-3K 5K-10K

T2P1 20K 50K

42,43 5K-10K 20K-50K 100K 200K-250K

TC33 250 500-2.5K 5K-10K 25K 50K

TC31 500-3K 5K-10K

TC21 20K 50K

62,63 100-300 500-3K

RSC 50-300 500-3K 5K-10K

TS2 50-300 500-3K 5K-10K

USB 200 500-5K 10K

BSP 100-250 500-2.5K 5K-10K

TS 25-300 500-3K 5K-10K 15K 20K 30K-40K

NS 25-300 500-3K 5K-10K 15K 20K

GS 25-300 500-3K 5K

GS-SS 250-3K

20210 25-300 500-3K 5K-10K 15K 20K

263D 500-3K

363,9363 50-300 500-3K 5K-10K

60036 50-300

60001 25-150 250 500-3K 5K-10K 15K 20K

Note: Thread size 1/2-20 refers to a 1/2” O.D. having 20 threads per inch of length.

Components

IBC213-01 Pollitt Dr Ext

Fair Lawn NJ 07410201-797-2718 * 800-631-0347


PresortedStandard

U.S. Postage

PAID

Fair Lawn, NJPermit No. 69

13-01 Pollitt Drive ExtFair Lawn NJ

07410USA

Address Service Requested

Mail Room Supervisor: Our customer at your location has requested this catalog. If this catalog cannot be delivered as addressed,please forward to your company’s Purchasing Manager and call us at 800-631-0347 to update the changes.

write13-01 Pollitt Drive ExtFair Lawn NJ 07410

phoneToll free: 800-631-0347Inside NJ: 201-797-2718

faxToll Free Fax: 888-797-2288Inside NJ fax: (201) 797-2287

browsewww.totalcomp.com

[email protected]

Components 2010

Documents

Transcript of Components 2010