Product Overview

IMW’s CompleteCNG includes proven

CleanCNG technology in a package

that combines portability with

configurable plug-and-play installation.

The self-contained system has a

smaller footprint than a standard built-

in station and requires minimal on-site

construction, making it fast to install

and easy to relocate. IMW designers

and engineers have responded to the

needs of the market to deliver a

comprehensive sustainable CNG

fueling system with minimal

environmental impact.

WHAT IS CompleteCNG?

WHY CHOOSE CompleteCNG?

FEATURES

Semi-permenant mounting, including concrete, asphalt, and prepared gravel

Compact integrated footprint featuring all major systems required to dry, compress and dispense

natural gas on one skid

Versatile on-skid and off-skid dispensing solutions for growing fleets

Two levels of oil containment, preventing soil contamination

Additional space provided for 3rd part fire and security panel (in MCC).

Redundancy of twin compressors which can be operated independantly

Vibration isolation pads provided which reduce vibration transmission to ground

IMW’s CleanCNG non-lubricated compressor technology

Worldwide support through IMW offices and affiliates

BENEFITS

Lower total cost as a result of smaller site requirement and reduced installation costs

Reduced design and permitting during installation

All-in-one package includes compressors, MCC, priority, buffer storage and optional gas dryer and

on-skid dispensing modules

Can fuel up to 8 vehicles with on-skid dispenser modules

Off-skid connections for standalone dispensers and fill posts

Provides upfront capital savings and the ability to expand the system

Self-monitoring and fully automatic operation with safety shutdowns

Safe design with gas detection and vent systems providing early warning and/or shut down in

case of gas leaks

Simplifies future redeployment with non-permanent mounting solutions

Remote Monitoring, which reduces on-site maintenance

WHY CHOOSE CompleteCNG?

HOW MANY TRUCKS CAN CompleteCNG FILL?

1

2

3

4 5 6

7

8

This is a proposed site

layout for a Waste

Management site

utilizing the Complete

CNG fueling system.

Using eight time fill

hoses (four modules) it

is possible to fuel eight

Natural Gas Vehicles at

once.

CompleteCNG Station

TECHNICAL SPECIFICATIONS:

TECHNICAL SPECIFICATIONS:

Configuration Single or Twin

Weight 38,000 lbs

Enclosure dimensions 26’8”Lx8’6”Wx10’2”H

Horsepower 50HP (37kW), 100HP (75kW), 150HP (112kW)

Flow Range (Per

compressor) SCFM: 72-427 DGE/h: 30 – 178 Nm³/h: 116 - 686 Sm³/h: 122 - 724

Inlet Pressure Range 5-150 PSIG

Electrical Supply 575 VAC, 60 hz / 480 VAC, 60 hz

Discharge Pressure 4500 PSIG

Stages 4, or 5

Code Compliance ANSI, ASME, CSA, NFPA, UL

CompactCNG 50-150 Small Pilot/Test Project

CompleteCNG 50-150 Mediu

m Garbage Fleet

CleanCNG 150-300 Large Bus Fleet

WHERE DOES CompleteCNG FIT?

HP

OPTIONS?

OPTIONS:

Cold Weather Package (-40C Rating)

On-Skid Gas Dryer

Priority Panel Upgrade (Fast Fill Line)

Priority Panel Flow Meters (Total and/or Fast Fill)

On-skid time fill dispenser modules (Up to 4 modules with 2 hoses per module)

On-skid fast fill dispenser module (1 module with 1 hose)

Single Compressor (expandable to twin later)

Wireless communication package

On board 120V AC Power (5KVA)

Compressor Status Beacons

Exterior Flood Lights

Why IMW? 5 Exclusive Competitive Advantages

IMW Exclusive Competitive Advantages

ONLY #1: IMW non-lubricated compressors set

the global standard for minimum oil carry-over

in CNG compressors without the waste, cost and

negative environmental issues of additional filters, auto

oil drain systems and supplementary oil tanks. Only 5

parts-per-million or less vs. 100 PPM or more.

Lower operating costs: Oil litres/year: Lubricated

systems= up to 1200 vs. IMW = 80 in crankcase

Lower maintenance costs: no oil accumulation in

compressor or vehicle systems. Happier customers

and increased station profitability.

Inside a CNG vehicle, onboard CNG stored at 3600

psig is regulated to 100 psig by a regulator and then

injected into engine. There are many examples of oil

soaking the regulator diaphragm, affecting its

accuracy and, in some cases, causing a rupture of

the regulator internals if oil clogs the regulator.

The majority of engine performance

issues are attributable to oil carryover,

which is a problem that begins at the

fueling station.

Leo Thomason, Executive Director

Natural Gas Vehicle Institute

“The Achilles Heel of Natural Gas Vehicles”

“

”

#1

IMW Exclusive Competitive Advantages

ONLY #2: IMW is the largest and only exclusive manufacturer of non-lubricated CNG compressors

globally making us a proven manufacturer with the world

class experience you need supporting you

A century of manufacturing experience

3 decades of non-lubricated CNG compressor

manufacturing experience

Sales

Service

#2

IMW Exclusive Competitive Advantages

ONLY #3: The best durability and reliability in the

industry

IMW has the most northerly long term operational

installation in the world in Barrow Alaska, which,

combined with our installations in Qatar demonstrate

reliable commercial operation across more than a

110oC temp range and some of the most abusive

conditions on earth

Gas dryers are installed on low pressure inlet not the

high pressure discharge, keeping IMW compressor

system dry with better chances of not freezing during

the extreme temperatures of winter.

Existing installation in South America still running at

70,000 hours

#3

IMW Exclusive Competitive Advantages

ONLY #4: IMW is the only manufacturer offering

advantages of twin & triple configurations:

Allows for variable supply for higher efficiency at

low demand periods

Full redundancy and enhanced reliability

#4

IMW Exclusive Competitive Advantages

ONLY #5: Only IMW offers a truly single-skid

CompleteCNG solution

Everything is on-board. No additional pads, piping

or electrical needed for:

1. Compressor

2. Dispensers

3. Motor Control Center

4. Priority Panel

5. Buffer Storage Tank

6. Dryer

7. Foundation

#5

43676 Progress Way • Chilliwack, BC • Canada V2R 0C3 p +1 604.795.9491 f +1 604.792.3806 e info@imw.ca

imw.ca

imw.ca/facebook

imw.ca/linkedin

imw.ca/youtube

43676 Progress Way • Chilliwack, BC • Canada V2R 0C3 p +1 604.795.9491 f +1 604.792.3806 e info@imw.ca

Dave Orton

e: dorton@imw.ca

d: +1 604.393.7659

m: +1 604.512.0009