Compact inset slipform paver. Slipform Pavers...the slipform paver turns on its own axis for maximum...

Compact inset slipform paver.

Slipform PaversSP 62 | SP 62 i

Highlights in concrete paving(pages 4 / 5)

1 | EXCEPTIONAL FLEXIBILITY IN CONCRETE PAVING

The slipform paver achieves perfection in the highly precise paving of standard concrete slabs at widths ranging from 3.5 m to 7.5 m and layer thicknesses of up to 450 mm.

2 | TRIED-AND-TESTED SLAB PAVING MOULD

Metric inset slab paving moulds of the 910 m or 910 wm series are on offer. The 910 wm series is equipped with a wearing pan in standard design and central crown as an optional feature.

3 | OPTIONS IN CONCRETE COMPACTION

Depending on customer requirements, the paver can be equipped with a hydraulic or electric vibrator drive. In standard design, it comes with 12 hydraulic connectors (optionally 18) but can optionally be fi tted with 18 or 24 electric connectors.

Highlights in engine technology and operation (pages 6 / 7)

4 | EFFICIENT ENGINE MANAGEMENT

The ECO MODE feature automatically adjusts the engine output to the current performance requirements, thus en-suring reduced diesel consumption and low noise emission levels.

5 | STATE-OF-THE-ART ENGINE TECHNOLOGY

The SP 62 features state-of-the-art, high-performance en-gine technology (155 kW / 208 HP / 211 PS) complying with exhaust emission standards EU Stage 3a / US Tier 3.The SP 62 i features state-of-the-art, high-performance en-gine technology (180 kW / 241 HP / 245 PS) complying with exhaust emission standards EU Stage 4 / US Tier 4f.

6 | PERFECT ERGONOMIC DESIGN AND HANDLING

Relaxed working is ensured by the ergonomically designed workplace offering a user-friendly operating concept and perfect visibility.

At a glance: outstanding features of the new SP 62 / SP 62 i

1 |

5 |

6 |

02 03

Highlights in machine control (pages 8 / 9)

7 | HIGHLY PRECISE STEERING AND DRIVE SYSTEMS

Intelligent control systems for exceedingly quiet operation and the responsive skid steering system guarantee preci-sion in concrete paving.

8 | MACHINE CONTROL SYSTEMS FEATURING ADVANCED INTELLIGENCE

The standardized interface for quick, targeted service diagnostics and the state-of-the-art WITOS telematics system increase effi ciency in everyday operation.

9 | FIELD-PROVEN 3D INTERFACE

The optional interface guarantees tested compatibility with the 3D control systems of leading suppliers.

> ECONOMICAL PAVER ON TWO TRACKS FOR WORKING WIDTHS OF UP TO 7.5 M

> EASE OF TRANSPORT AND QUICK AVAILABILITY ON SITE

> EXCEPTIONALLY LOW GROUND PRESSURE OF THE MACHINE

Highlights in modular design (pages 10 / 11)

10 | FULLY MODULAR MACHINE DESIGN

The paver’s fully modular design is synonymous with fl ex-ible modifi cation, easy retrofi tting of options and applica-tion-specifi c adjustment to site conditions.

11 | INTELLIGENT TRANSPORT CONCEPT

The two-track design of the SP 62 / SP 62 i ensures ease of transport as well as quick setup and operational readiness.

10 |

2 |

8 |

4 |

7 |

9 |

3 |

11 |

Highlights in concrete paving

CONCRETE SLABS WITH CENTRAL CROWN

Concrete slabs can be produced with a central crown of up to 3%.

SUPER SMOOTHER The oscillating super smoother manufactured from high-quality material ensures a perfect surface fi nish.

OSCILLATING BEAM The eccentrically driven

heavy-duty oscillating beam with automatic lifting feature in case of machine stoppag-es removes any irregularities

in the concrete surface.

METRIC SLAB PAVING MOULDSConcrete of stiff consistency can be paved to precision using metric inset slab paving moulds of the 910 m or 910 wm series including wearing pan.

SPREADING PLOUGH OR SPREADING AUGERA spreading plough or spreading auger ensures even distribution of the concrete deposited in front of the paving mould.

04 05

HYDRAULIC VIBRATORSThe standard vibrating equipment comprises 12 hydraulic connectors (optionally 18) for hydraulic vibrator drive.

ELECTRIC VIBRATORSDepending on customer requirements, 18 or 24 electric connectors can be installed for electric vibrator drive.

SEPARATE HYDRAULIC SIDE TIE BAR INSERTERSThe side tie bar inserters can be mounted on the left, on the right, or on both sides of the machine.

CONCRETE SLABS FROM 3.5 M TO 7.5 M IN WIDTH

High-precision, high-quality paving of concrete slabs at

widths ranging from 3.5 m to 7.5 m.

LAYER THICKNESS OF UP TO 450 MMPaving at layer thicknesses of up to 450 mm – higher thicknesses can be realized on request.

Separate side tie bar inserter.

Highlights in engine technology and operation

ERGONOMIC DESIGN The ergonomically de-signed operator’s platform improves operator perfor-mance, therefore increas-ing the productivity of the overall machine.

PERFORMANCE-OPTIMIZED ECO MODE ENGINE MANAGEMENT

Automatic adjustment of the engine output to performance requirements ensures

highest engine effi ciency, fuel economy and low noise emission levels.

06 07

ENGINE TECHNOLOGY FOR EU STAGE 3A / US TIER 3The high-powered diesel engine installed in the SP 62 complies with exhaust emission standards EU Stage 3a / US Tier 3.

ENGINE TECHNOLOGY FOR EU STAGE 4 / US TIER 4FThe high-powered diesel engine installed in the SP 62 i complies with the stringent requirements of the currently highest exhaust emission standards EU Stage 4 / US Tier 4f.

HIGH ENGINE POWERThe high-powered engine ensures effi cient concrete paving in the optimum performance and torque ranges.

PERFECT VISIBILITYThe spacious operator’s platform provides a perfect view of the paving process.

OPTIONAL FOLD-DOWN CANOPYThe fold-down canopy allows operation to continue regardless of weather conditions.

EASE OF MAINTENANCEReady access to the check points and points of maintenance minimizes maintenance requirements.

STATE-OF-THE-ART CONTROL PANELThe control panel features a state-of-the-art screen and clear, language-neutral symbols to promote productive working.

STANDARDIZED OPERATING CONCEPT

The standardized, self-explanatory operating con-cept in line with the various

new SP model ranges offers additional synergistic effects.

Ergonomically optimized, clearly structured operating concept.

HIGH-QUALITY MACHINE MANAGEMENT SYSTEM

The high-quality machine management system has a large proportion of software

developed in-house and increases both safety in operation and the range of

applications of the slipform paver.

Highlights in machine control

HIGHLY PRECISE DRIVE MOTOR CONTROL

The highly precise drive motor control prevents

jerky driving even when working at minimum

speed.

08 09

SPEED ADJUSTMENT Computer-controlled speed adjustment of the track units enables specifi cations to be adhered to with pinpoint precision even when paving in bends.

SERVICE DIAGNOSTICS SYSTEMWIDIAG, the service diagnostics system with standardized interface, is used by WIRTGEN service engineers for quick, targeted service diagnostics right on site.

UPGRADABLE CAN-BUS SYSTEMThe existing CAN-bus system can be upgraded.

EFFICIENT WITOS TELEMATICS SYSTEMThe WIRTGEN WITOS FleetView telematics system supports fl eet manage-ment, machine position and status monitoring, as well as maintenance and diagnostic procedures.

SECOND-TO-NONE SLOPE CONTROL FEATUREThe innovative electronic slope control developed by WIRTGEN results in signifi cantly shorter machine response times which are refl ected in perfect paving results.

OPTIONAL INTERFACE FOR 3D CONTROL SYSTEMSThe optional interface creates ideal conditions for the use of state-of-the-art 3D systems in concrete paving. Thorough acceptance procedures verifying the compatibility with 3D control systems of leading suppliers ensure safety of use.

TURNING ON ITS OWN AXISThe two track units run in opposite directions at the push of a button so that the slipform paver turns on its own axis for maximum manoeuvrability.

Turning on its own axis to save time during manoeuvring.

TRIED-AND-TESTED SKID STEERING SYSTEM

The responsive skid steering sys-tem ensures highly precise driving

behaviour and highest concrete quality when paving in bends.

Highlights in modular design

TELESCOPING MACHINE FRAMEThe machine frame can be telescoped in

longitudinal and transverse direction to allow full adjustment to site conditions.

EASE OF MODIFICATIONEasy modifi cation and addition of complementary features cater to

complex customer-specifi c applications.

RETROFITTING MADE EASYStandard interfaces enable

easy retrofi tting of individual customer-specifi c options.

FULLY MODULAR MACHINE DESIGNThe paver’s fully modular design enables a wide variety of inset paving applications.

10 11

GETTING READY FOR TRANSPORT QUICKLYMinimum modifi cations are required to prepare the machine for transport, thus reducing setup times and optimizing availability during operation.

COMPACT DESIGNExcellent mobility and the paver’s compact design ensure effortless turning and manoeuvring.

ADAPTABILITY TO SITE CONDITIONSThe machine has been engineered to ensure reliable adaptability to site conditions, thus increasing both productivity and the range of applications.

TWO INSET MACHINE MODELSThe two-tracked SP 62 / SP 62 i slipform paver is optionally available as a four-tracked model, the SP 64 / SP 64 i.

Machine also available as a four-tracked model, the SP 64 / SP 64 i.

12 13

SP 62 SP 62 i

Range of applications

Slab paving applicationPaving width: 3.50 to 7.50 m *1

Layer thickness: up to 450 mm *1

Concrete spreading

Spreading auger Modular extension to up to 7.50 m

Spreading plough Modular extension to up to 7.50 m

Slab paving equipment

Slab paving mould type 910 m (excluding wearing pan, excluding crown function)

Modular extension to up to 7.50 m

Slab paving mould type 910 wm(including wearing pan, including or excluding crown function)

Modular extension to up to 7.50 m

Oscillating beam Modular extension to up to 7.50 m

Super smoother Modular extension to up to 7.50 m

Side tie bar inserter Right and / or left

Vibrators and circuits

Hydraulic vibration 12 connectors (optional 18 connectors)

Electric vibration 18 connectors (optional 24 connectors)

Hydraulically driven vibrators Curved (D66)

Electrically driven vibrators Curved (D76)

Engine

Engine manufacturer Deutz Deutz

Type TCD 2012 L06 2V TCD 6.1 L6

Cooling Water Water

Number of cylinders 6 6

Rated power at 2,300 rpm 155 kW / 208 HP / 211 PS 180 kW / 241 HP / 245 PS

Displacement 6,057 cm3 6,057 cm3

Fuel consumption, full load 42 l / h 46 l / h

Fuel consumption, 2/3 load 17 l / h 18 l / h

Exhaust emission standards EU Stage 3a / US Tier 3 EU Stage 4 / US Tier 4f

Electrical system

Electrical power supply 24 V DC

Electric vibration 110 V AC 3~ / 200 Hz

Technical specifi cation

*1 = Please consult factory for special paving widths, layer thicknesses and optional equipment features*2 = Values within standard transport height; please consult factory for special dimensions*3 = Weights depend on the machine’s range of equipment and paving width

SP 62 SP 62 i

Tank capacities

Fuel tank 400 l 400 l

AdBlue® / DEF tank – 32 l

Hydraulic oil tank, electric vibration 200 l 200 l

Hydraulic oil tank, hydraulic vibration 400 l 400 l

Water tank 500 l + 500 l 500 l + 500 l

Driving properties

Paving speed 0 – 6 m / min

Travel speed in travel gear 0 – 18 m / min

Crawler units

Number 2

Type B1: dimensions (L x W x H) 3,390 x 300 x 660 mm

Height adjustment

Hydraulic 1,100 mm

Mechanical 420 mm

Central crown

Variable adjustment range For paving widths of 3.50 to 7.50 m: max. 3 % *2

Transport dimensions (L x W x H)

Paving width 3.50 m: Machine including slab paving mould type 910 m / 910 wm, including spreading plough, oscillating beam and super smoother (without guide bar for super smoother)

5,750 x 3,500 x 3,100 mm

Paving width 7.50 m:Machine including slab paving mould type 910 m / 910 wm, including spreading plough, oscillating beam and super smoother(without guide bar for super smoother)

9,750 x 3,500 x 3,100 mm

Machine weights

Operating weight CE (including slab paving mould type 910 m), 3.50 m 25,000 kg *3

Machine weight 24,000 to 34,000 kg *3

14 15

Dimensions

Working direction

Paving situation: slipform paver SP 62 / SP 62 i equipped with spreading auger or spreading plough, slab paving mould type 910 m / 910 wm, oscillating beam and super smoother

6,230

3,390

775

635

335

125

300

1,750

4,10

0

B1:

660

0 – 4

50

Laye

r th

ickn

ess

+ 3

,100

1,00

0

At p

avin

g w

idth

of 7

,500

: 9,4

70A

t pav

ing

wid

th o

f 3,5

00: 5

,470

At p

avin

g w

idth

of 2

,000

: 4,4

70

Pavi

ng w

idth

Dimensions in mm

Slab

Slab paving mould

Subgrade level

Working direction

Transport situation: slipform paver SP 62 / SP 62 i equipped with spreading auger or spreading plough, slab paving mould type 910 m / 910 wm and super smoother

3,500 without guide bar for super smoother

3,700 with guide bar for super smoother

3,10

0

Tran

spo

rt le

ngth

= p

avin

g w

idth

+ 1

,970

Dimensions in mm

16 17

= Standard equipment = Standard equipment, replaceable with optional equipment = Optional equipment

Standard equipment

SP 62 SP 62 i

Base machine

Basic machine consisting of engine unit and chassis, mechanically telescoping to the left and right for the use of paving moulds between the track units. Also includes pre-installation for two crawlers.

Fuel tank 400 litres

Electrical system (24 V)

Cooling system with temperature-controlled fan speed

Hydraulic system with an adequately sized hydraulic oil tank and a pump splitter gearbox with 2 output shafts and the pumps required for the basic equipment of the machine

Main frame and height adjustment

Robust steel frame, which can be telescoped to either side by 810 mm, can be optionally extended using fi xed extension pieces

With a large number of fi xation points, the chassis is prepared for modular supplementing with various machine functions

Concrete equipment between 2.00 m and 4.00 m can be connected to the frame, optionally extendable to working widths up to 7.50 m

Chassis components for step-by-step mechanical telescoping for working widths up to 4.50 m

Crawler unit and crawler unit connections

Paving speed of B1 crawler unit: 0 – 9 m / min

Transport speed of B1 crawler unit: 0 – 18 m / min

Model with two B1 crawler units (10 rollers) with triple grouser steel track pads

Machine control and levelling and steering

WI-CONTROL - the high-quality control for optimum interaction between all machine functions

Fault messages are shown on the machine display

The existing CAN bus system can be expanded for the specifi c customer

Eco mode: Engine management optimised acc. to demand for reduced diesel consumption and low noise emissions

Proportional electrohydraulic levelling and steering by PLC system including 4 levelling sensors and 2 steering sensors

Sensor mountings adjustable in height and range

An electronic slope sensor enables paving with a working with of 4.00 m / 13 ft with a stringline on only one side

Four levelling hydraulic cylinders with 1.00 m stroke


SP 62 SP 62 i

Vibration

Hydraulic vibrator drive for max. 12 vibrators

10x bent vibrators D66, hydraulically driven

Concrete equipment for carriageway paving

Mould boards series 910 m, without crown profi le – basic width 3.50 m

One-piece sideplates for paving mould series 910 m / 910 wm

Operator´s stand

Ergonomic operator’s stand with optimum view of the paving process

Ergonomic operation on two control panels with clear, language-independent symbols

Control panel 1 for setting up the machine according to the fi eld

Control panel 2 with multi-function control display, providing a menu for the operator giving all necessary machine parameters and allowing settings to be made. This can be adapted to all travel directions and paving confi gurations.

One control panel can be stored in the engine unit. The second control panel can be protected against vandalism and weather using lockable covers.

Automated recognition of the particular machine confi guration enables simple orientation for the operator

Others

Large tool package in lockable tool box

Extensive safety package with EMERGENCY STOP switches

Filling of the machine hydraulics with mineral hydraulic oil

Paint standard cream white RAL 9001

Lighting package with 4 halogen spotlights, 24 V

18 19


Optional equipment

SP 62 SP 62 i

Main frame and height adjustment

Chassis components for continuous hydraulic telescoping for working widths up to 6.00 m

Chassis components for continuous hydraulic telescoping including extension pieces for working widths up to 7.50 m

Concrete spreading for road surface paving

Spreader auger without crown profi le - basic width 3.50 m

Split spreader auger with / without crown profi le - basic width 3.50 m

Spreader auger - extension element 0.25 m, clockwise pitch




Spreader auger - extension element 0.25 m, counterclockwise pitch




Spreader plough - basic width 3.50 m

Spreader plough - extension element 0.25 m




Crawler unit and crawler unit connections

Model with two B1 crawler units (10 rollers) with polyurethane track pads

Extension of the walkway used by the operator to pass from one side of the machine to the other

Machine control and levelling and steering

Slab tracer, 2 pcs

Slab tracer, 4 pcs

Control unit for manual crawler unit steering

Pre-equipment for 3D levelling


SP 62 SP 62 i

Vibration

Hydraulic vibrator drive for max. 18 vibrators

Bended vibrator D66, hydraulically driven

Straight vibrator D66, hydraulically driven

Electric vibrator drive with 40 kVA generator for max. 18 vibrators

Electric vibrator drive with 40 kVA generator for max. 24 vibrators

10x bent vibrators D76, electrically driven

Bended vibrator D76, electrically driven

Straight vibrator D66, electrically driven


Metering gate for paving mould without crown profi le - basic width 3.50 m

Split metering gate for paving mould with / without crown profi le - basic width 3.50 m

Automatic metering gate control for concrete paving moulds

Metering gate - extension element 0.25 m




Mould boards series 910 wm, without crown profi le – basic width 3.50 m

Paving mould series 910wm, with / without crown profi le - basic width 3.50 m

Two-piece sideplate for production of headers / construction joints, 910 m / 910 wm series paving mould

Mould boards series 900 m / 910 m - extension element 0.25 m wide

Mould boards series 910 m - extension element 0.50 m wide



Paving mould series 910 wm - extension element 0.25 m wide




20 21


Optional equipment

SP 62 SP 62 i


Oscillating beam without crown profi le - basic width 3.50 m

Oscillating beam with / without crown profi le - basic width 3.50 m

Oscillating beam - extension element 0.25 m




Super smoother - basic width 3.50 m

Super smoother - extension element 0.25 m





1 side tie-bar inserter for straight tie-bars, max. ø 20 mm, length 800 mm

2 side tie-bar inserters for straight tie-bars, max. ø 20 mm, length 800 mm

Operator´s stand

Weather canopy for operator’s stand, foldable manually

Others

Paint in one special colour (RAL)

Paint in two special colours (RAL)

Paint in maximum two special colours with substructure in special colour (RAL)

High-performance lighting package with 8 LED spotlights, 24 V

Hydraulic high-pressure water cleaner unit, 500 litre steel tank

Additional electrical water pump 24 V with 10.00 m hose and spray gun with handle

Additional water tank steel, 500 litres additionally

Self-levelling for transporting

Rotary beacon halogen 24 V with magnet base


SP 62 SP 62 i

Others

Flashing light 24 V with magnet base

Two 230 V lighting balloons, including power generator

Two 110 V lighting balloons, including power generator

High-performance lighting package consisting of 4 LED working lights (24 V) for illuminating the compression area

Wire tensioning system, complete with 1,000 m steel wire

Second tensioning winch for levelling the machine using two wire ropes

Wire tensioning system, complete with 4x 300 m nylon rope

Radius kit, fi breglass rod as guide wire replacement on corners with different radii

Daily rate for startup

Export packing

All details, illustrations and texts are non-binding and may include optional additional fi ttings. Subject to technical modifi cations. Performance data dependant upon operational conditions. No. 2579917 EN-07/17 © WIRTGEN GmbH 2017. Printed in Germany.

WIRTGEN GmbHReinhard-Wirtgen-Str. 2 · 53578 Windhagen · Germany

Phone: +49 (0) 26 45 / 131-0 · Fax: +49 (0) 26 45 / 131-392Internet: www.wirtgen.com · E-Mail: [email protected]

Compact inset slipform paver. Slipform Pavers...the slipform paver turns on its own axis for maximum...

Documents

Transcript of Compact inset slipform paver. Slipform Pavers...the slipform paver turns on its own axis for maximum...