Before connecting, operating or adjusting this product,please read this instruction booklet carefully andcompletely.

J10D-A_JA1ULLA_ENG_2485

Compact Home TheaterSystemOWNER’S MANUALMODEL: LFD790SPEAKERS: J10D-SF/J10D-SA

© Copyright 2006, LG Electronics U.S.A., Inc.

For service/support Call:

Toll Free Number

11--880000--224433--00000000

www.LGusa.com

aMpLifier/speakerOutput Power - Front 75W x 2*Output Power - Subwoofer 150W**Front Speaker Type Book Shelf TypeSubwoofer Speaker Type Standard (7 inch)Satellite Frequency Response 120 - 20000HzSubwoofer Frequency Response 40 - 1500Hz audio/video pLayBack forMats Disc Capacity 1DVD (PAL) •DVD (NTSC) •DVD-R •DVD-RW •DVD+R •DVD+RW •CD-R/RW •MP3 Audio •WMA Audio •DVD Audio •JPEG Photo •DivX Video •MPEG4 Video •Music Photo Album • Graphic user interface Initial Menu Language EnglishAvailable Menu Languages English/Spanish/French video capaBiLities Video Digital/Analog Conversion (DAC) 27MHz/10bitVideo Output Resolutions 480i/480p/720p/1080iProgressive Scan •Maximum HDMI™ Up-Convert 1080i audio capaBiLitiesAudio Digital/Analog Conversion (DAC) 192kHz/24bitS/N Ratio More than 75dB (1kHz)XPS Pro (eXtreme True Sound Pro) •Sound Modes - 2 Channel (DSP) 13DTS Decoding •Dolby Digital 5.1 Channel Decoding •Dolby Prologic II •Dolby Digital 2 Channel Down-Mix •DRC (Dynamic Range Control) •

dvd pLayBack featuresScreen Fit •Zoom •Parental Lock •Chapter Skip (Rew/Fwd) •Search/Slow/Step Skip for Rew and Fwd •1.5x Playback with Audio/Video •Bookmark Search •Resume •A-B Repeat Play •Closed Caption •Vocal On/Off • cd pLayBack features Programmable Play •Random Play •Repeat Play •Number of Programmable Tracks 300JPEG Preview •MP3 ID3 Tag Support • usB Media host/pLus pLayBack JPEG •MPEG1 •MPEG2 •MPEG4 •WMA •DivX® •MP3 •MP3 VBR • tuner Audio Tuner Band FM/AMFM Tuner Range (100kHz) 87.50-108.00MHz(50kHz)AM Tuner Rane (10kHz) 530-1720kHzRadio Tuner Presets 50Digital Satellite Radio Tuner XM-Ready Main unit inputs/outputs Headphone Jack 1USB (A) Port 1HDMI 1

suBWoofer inputs/outputs Optical Digital Audio In 1Audio (L/R) In 1Composite Video Out 1Component Video Out 1FM Antenna Input 1AM Antenna Input 1Satellite Radio Antenna Input (XM) 1Mini Stereo Jack (3.5 mm Mobile) 1 suppLied accessories Remote Control Type UniversalA/V Cable (RCA Type) •Battery (Size) (AAA)User Manual •QSG English (Quick Start Guide) •Warranty Card •Customer Registration Card •FM Antenna •AM Antenna • speciaL features Screen Saver •Auto Power Off •Demo Mode •Initial Logo • specifications Front Panel Display FlourescentCabinet Color Glossy BlackMain Unit Dimensions (W x H x D) 12.8" x 3.1" x 8.5"Front Speaker Dimensions (W x H x D) 4.1" x 5.5" x 12.8"Subwoofer 8.5” x 11.8” x 12.8”Main Unit Weight 6.8 lbsFront Speaker Weight (Each) 6.4 lbsSubwoofer Weight N/ADimensions w/Packaging (W x H x D) 14.6" x 17.3" x 26.0"Weight In Package 46.5 lbs.UPC N/AWarranty 1 Year Parts/90 Days Labor

LFD790

reMote rear suBWoofer audio/video inputs/outputs side Main unit

LG Electronics U.S.A., Inc. 1000 Sylvan Avenue, Englewood Cliffs, NJ 07632 (800)243-0000

© 2007 LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. LG Design and Life’s Good are trademarks of LG Electronics, Inc. All other trademarks are the property of their respective owners. Design and specifications subject to change without notice. 03/29/07

coMpact hoMe theater systeM

*Rated at 1kHz into 4 ohms, 10% THD**Rated at 30Hz into 3 ohms, 10% THD

rear Main unit

24

Viewing a JPEG FileThis unit can play JPEG files. Before playing JPEGrecordings, read “Photo file requirement” on right.

1. Press HOME.The HOME menu appears.

2. Select [PHOTO] option.

3. Select a media that contains JPEG file then pressENTER.The [Photo List] menu appears on the TV screen.

4. Use v / V to select a file, then press ENTER.The menu options appear on the left side of themenu.

Tips: If you want to move to the upper directory, use the

v / V to highlight and press ENTER. You can also display HOME menu to select another

media by pressing HOME.

5. Use v / V to select [Full Screen] then pressENTER.The selected image is displayed in full screen.Depending upon the size and number of JPEGfiles, it could take a long time for the unit to readthe files.

6. To stop viewing at any time, press STOP.The [Photo List] menu appears.

Photo List menu options

1. Press v / V to select a file on the [Photo List]menu then press ENTER. The menu options appear.The menu options displayed differ depending onthe selected media.

Selecting multiple files (folders)1. Press MARKER.

A check mark appears on the file or folder.Press MARKER again to cancel the marked fileor folder.

2. Repeat step 1 to mark additional file (folders).

2. Use v / V to select an option then press ENTERto confirm your selection.

[Open] Opens the folder and a list of files in thefolder appears

[Full Screen] Shows the selected file as fullscreen.

[Slide Show] Displays Slide Show menu.

Press ENTER to appear or disappear this menuduring viewing the full screen.

Photo file requirementFile extensions“.jpg”

Photo size: Less than 4MB recommended

CD-R Format:ISO 9660 and JOLIET.

DVD±R/RW Format:ISO 9660 (UDF Bridge format)

Maximum Files/Disc: Less than 999 (total number of files and folders)

Notes on JPEG fileProgressive and lossless compression JPEG imagefiles are not supported.

25

Pla

ybac

k

Skip ImagesWhile viewing a picture, press . or > once toreturn to the previous file or advance to the next file.

Rotate ImagesUse v / V while viewing a picture to flip the picturecounterclockwise or clockwise.

View Slide ShowsSlide show will automatically go to next picture at aspecified interval.

1. Select [Slide Show] option on the [Photo List]menu.

2. Press ENTER.The Slide Show menu appears.

3. Use b / B / v / V to set the options.

[Object] option: [Selected] Views slide show only selected files

with MARKER button. Use the MARKER buttonto select multiple files.

[All] Views slide show all files.

[Speed] option: Sets the Slide Show speed to [Slow], [Normal], or[Fast].

4. Select the [Start] option then press ENTER to startthe Slide Show.

5. Press STOP to stop the Slide Show and return tothe [Photo List] menu.

To Pause the Slide Show1. Press X to pause slide show.

2. When you want to continue slide show, press X or B (PLAY).

26

AUX/MOBILE/OPTICAL(Listening to an external source)You can listen to the sound of the connected externaldevice through your unit.

1. Check the external device has been properlyconnected. (See Connecting an additionalappliance on page 12.)

2. Press MOBILE on the remote control to selectMOBILE mode. (If you are in any menu mode,remove it completely by pressing RETURN orHOME repeatedly.)

or

Press HOME and b or B to select Easy Menu,and then select AUX or OPTICAL.

3. To avoid noise distortion, turn down the volume onyour external device.

4. Press PLAY on the connected device to startplayback.

5. To adjust the sound and volume, use the soundcontrols on your external device and this unit.

Note:

In MOBILE mode, B (PLAY), X, . and >buttons operate only on the connected Apple iPodthrough an Apple iPod universal dock with a built-ininfrared (IR) receiver. To release the MOBILE mode,press mode button (TUNER, DISC, USB) you want, orpress HOME.

Using Apple iPodYou can perform the basic operations of your iPodusing the supplied remote control with this unit.

Notes: You need an Apple iPod universal dock with a built-

in infrared (IR) receiver and an audio cable with a3.5 millimeter stereo miniplug.

It works with all iPod models that have a dockconnector.

Depending on the type of iPod, you may need toinsert one of the dock adapters into the dock slotbefore you station your iPod.

Adjust the volume to a moderate level before youconnect your iPod and this unit.

1. Station your iPod in the dock.

2. Connect one end of an audio cable with a 3.5millimeter stereo miniplug into the MOBILE jack onthe rear of the active subwoofer.

3. Connect the other end of an audio cable with a 3.5millimeter stereo miniplug into the dock line outjack.

4. Press MOBILE on the remote control to selectMOBILE mode.

5. Point the supplied remote control with this unit atthe front of the dock.

6. Press B (PLAY), X, . or > on the suppliedremote control with this unit to turn iPod on.

7. You can control play (B), pause (X) and skip(./>). You can turn iPod off by pressing and holding B(PLAY) or X on the supplied remote control withthis unit.

27

Ref

eren

ce

ReferenceAdditional InformationPresetting the Radio Stations

You can preset 50 stations for FM and AM (MW).Before tuning, make sure that you have turned downthe volume.

1. Press TUNER on the remote control. (If you are inany menu mode, remove it completely by pressingRETURN or HOME repeatedly.)

orOn the home menu screen, select RADIO andthen press ENTER.

2. And then every time you press TUNER, FM andAM (MW) changes alternately.

3. Press and hold TUN.- or TUN.+ on the remotecontrol for about three seconds until the frequencyindication starts to change, then release.Scanning stops when the unit tunes in a station.

4. Press PROG./CLEAR on the remote control.A preset number will flash in the display window.

5. Press PRESET + or PRESET - on the remotecontrol to select the preset number you want.

6. Press PROG./CLEAR on the remote control.The station is stored.

7. Repeat steps 3 to 6 to store other stations.

To tune in a station with a weak signal Press TUN.- or TUN.+ repeatedly in step 3 to tune inthe station manually.

To clear all the stored stations Press and hold PROG./CLEAR for about five secondsand “ERASE ALL” is appeared in the display windowand then press PROG./CLEAR again, the stations arecleared. If you have accidentally entered into the “ERASE

ALL” mode and you do not wish to clear thememory, do not press any key. After a few seconds“ERASE ALL” will go off by itself and change tonormal mode.

Note:If all stations have already been entered, the FULLmessage will appear in the display window for amoment and then a preset number will flash. To change the preset number, follow the steps 5-6 asabove.

Listening to the Radio

Preset radio stations in the unit’s memory first (see“Presetting the radio stations” on the left).

1. Press TUNER until AM (MW) or FM appears in thedisplay window.The last received station is tuned in.

2. Press PRESET + or PRESET - repeatedly on theremote control to select the preset station youwant.Each time you press this button, the unit tunes in onepreset station at a time.

3. Adjust the volume by pressing VOL + or VOL- onthe remote control repeatedly.

To turn off the radio Press POWER to turn the unit off or select anotherfunction mode (MOBILE, DISC, USB).

To listen to non-preset radio stations Use manual or automatic tuning.

For manual tuning, press TUN.- or TUN.+ on theremote control repeatedly.

For automatic tuning, press and hold TUN.- orTUN.+ on the remote control for about three seconds on the remote control.

To select a preset radio station directlyYou can use the number buttons on the remotecontrol to select a preset radio station directly.For example, to listen to the preset station 4, press 4on the remote control. To listen to the preset station19, press 1 and then 9 (within 3 seconds).

For your reference If an FM program is noisy

Press AUDIO repeatedly on the remote control sothat “STEREO” disappears in the displaywindow. There will be no stereo effect, but thereception will improve. Press this button repeatedlyagain to select “STEREO”.

To improve receptionReorient the supplied antennas.

28

XM Satellite Radio Operation

What is XM Satellite Radio?

XM Radio is the satellite radio service with millions oflisteners across the U.S.Broadcasting live daily. XM Radio offers 160 digitalradio channels offering music, news, sports, comedy,talk, entertainment, traffic and weather reports, withhigh quality digital sound.XM service subscription sold separately. XM PassportSystem required to receive XM service (soldseparately). Installation costs and other fees andtaxes, including a one-time activation fee may apply. XM service only available in the 48 contiguous UnitedStates. Residents in Canada please see informationabout Canadian Satellite Radio at the followingwebpage: (www.cdnsatrad.com). XM Connect-and-Play is a trademark of XM Satellite Radio Inc. ©2006XM Satellite Radio Inc. All rights reserved.

What is XM Ready?

An audio system labeled “XM Ready” means that thesystem with the addition of an XM Passport Antennahas everything you need to play XM. Everything elseis built inside.

XM Satellite Radio connections

Connect the XM Digital Antenna to the XM passportsystem on the unit.

Activating Your ServiceA one-time activation fee is required to establish anaccount and activate service with XM Satellite Radio.Applicable activation changers will be added to yourfirst bill.

1. Before activating XM service, make sure your XMequipment is tuned to the XM Preview Channel(Channel 1).

2. Determine your eight-character XM Satellite RadioID number by referencing the label on your XMPassport System packaging, rear cover, or byselecting channel 0. The ID number will appear onthe display.

Note:Carefully check your XM Satellite Radio ID. The letterI, O, S, and F are not used

3. Activate your XM Satellite Radio service. Makesure you have a major credit card and your XMSatellite Radio ID number handy.

To activate via the internet: Visithttp://www.xmradio.com/activation

To activate via phone: Call 1-800-XM-RADIO (967-2346)A one-time activation fee will apply.

Selecting the XM Satellite RadioPress TUNER to select XM band.

XM informationWhen receiving the XM Satellite Radio containing, youcan see the information in the display window.

Press XM MODE to change XM display mode.

Channel Number → Channel Label →Song Name/Artist Name → Signal Strength →Channel Number → ...

• Channel Number :Display current XM Channel NumberChannel Number shows 3 seconds regardless itsdisplay mode when channel is changed.

When user edits or change preset, it works onchannel number display mode

• Channel LabelDisplay name of current channel.

• Song Name & Artist NameDisplay song name & artist name as scroll.

• Signal StrengthSignal Strength is showed by 3 bars with antennashape.

No Bar: No Signal.One Bar: Weak SignalTwo Bar: Marginal SignalThree Bar: Good Signal

MOBILESYSTEM(DVDP)

XM

XM passport system

29

Ref

eren

ce

Presetting the XM Satellite Radio Stations

You can preset 50 stations for XM. Before tuning,make sure that you have turned down the volume.

1. Press TUNER to select XM band.

2. Use XM CH - or XM CH + on the Remote Controlto select the desired channel.

3. Press PROG./CLEAR on the Remote Control.

4. Press PRESET + or - on the Remote Control toselect the preset number you want.

5. Press PROG./CLEAR on the Remote Controlagain.The station is stored.

6. Repeat steps 2 to 5 to store other stations.

To clear all the stored stations Press and hold PROG./CLEAR for about two secondsand “ERASE XM” is shown in the display window andthen press PROG./CLEAR again, the stations arecleared.

If you have accidentally entered into the "ERASEXM" mode and you do not wish to clear the memory,do not press any key. After a few seconds, the"ERASE XM" display will go off by itself and changeto normal mode.

Channel SelectionPreset Search

Use PRESET + or - on the Remote Control repeatedlyto select the preset station you want.

Direct Tuning

1. Using Numeric button on Remote Control, selectchannel number directly.

2. Press ENTER after more than one numeric keyinput, system moves to new channel immediately.

Channel up/down

Use XM CH - or XM CH + repeatedly to select thechannel you want.

Category Search

1. Select the Category Search mode using the CATkey on the Remote Control.(CAT Icon Blinking in Category Search mode.)

2. PRESET + or - changes target of category forsearch, XM CH - or XM CH + selects next channelof selected category in category search mode.

Note:Category type of current channel displays for 3seconds when category key is inputted in not categorydisplay mode

Category search mode is released below case. • CAT is inputted in Category search mode.• No input of PRESET +/-, XM CH - or XM CH + key

for 15 seconds.

Advisory Message

XM Passport System is notconnected• Check the connection of XM

Passport System

XM Passport System does notwork properly• Need service of XM Passport

System

XM Passport System is notactivated, or User does not haveauthorization for specific channel• Subscribe activation of XM

Passport System

Receiving signal is too weak• XM Passport System to south

window for best reception

Selected channel is notbroadcasting currently.• Check programming list, select

another channel.

XM Passport System is nowdecoding channel.• Wait completion of decoding

process

Selected channel is not available.• Check programming list, select

another channel.

Channel label or Song name/Artistname or Category name is notavailable

ANTENNA

SVC ANT

UPDATING

NO SIGNAL

OFF AIR

LOADING

XM---

------------/------------

30

SleepYou can set a certain period of time after which theunit will switch to standby.

1. On the remote control, press SLEEP repeatedly toselect the desired time period options (in minutes): Display shows the selected option briefly and

returns to its previous status.2. To view the time countdown to the standby mode,

press SLEEP again.To deactivate the sleep timer, press SLEEP untilprevious status is displayed.

orPress POWER to switch the unit to standby (or11/I on the front of the unit).

DimmerThis function will change the brightness of the displaywindow on the top panel during in power-on status.Press DIMMER repeatedly.

XTS proEach time you press XTS pro the setting changes inthe following order.

XTS-P OFF ↔ XTS-P ON

XTS-P ONThe unique sound quality of the LG Technologycreates the optimum sound for you to play theperfect playback of the original sound and to feelthe living sound source.

XTS-P OFFXTS-P mode tune off

Virtual soundPress VSM to set the virtual sound.

3D STEREORealtime 3D positioned sound renderingtechnology with stereo sources, optimized forstereo speakers. Listeners may experienceamazing virtual surround effects with their ownmultimedia players.

Virtual soundA pending downmix technology converts 5.1channel to 2 channel sound having directionalinformation of audio. And it makes a 2 channel or2.1 channel feel 5.1 channel sound.

Controlling Your TV with the SuppliedRemote Control

You can control the sound level, input source, andpower switch of your LG/GoldStar TV with thesupplied remote.

1. While holding down TV POWER button, press CHANNEL + or -.

2. Release TV POWER button.

You can control your TV using the buttons below.

By pressing You can

POWER Turn the TV on or off.

INPUT Switch the TV’s input source between the TV and other inputsources.

CHANNEL +/– Scans up or down through memorized channels.

VOLUME +/– Adjust the volume of the TV.

Note:When you replace the batteries of the remote, youmay have reset the remote control.

XM MODE/RESOL.CAT

TV ControlButtons

Source Display Effect2.1 ch. VIRTUAL ON 3D STEREO5.1 ch VIRTUAL ON Virtual sound

31

Ref

eren

ceArea CodeAfghanistan AFArgentina ARAustralia AUAustria ATBelgium BEBhutan BTBolivia BOBrazil BRCambodia KHCanada CAChile CLChina CNColombia COCongo CGCosta Rica CRCroatia HRCzech Republic CZDenmark DKEcuador ECEgypt EGEl Salvador SV

Area CodeEthiopia ETFiji FJFinland FIFrance FRGermany DEGreat Britain GBGreece GRGreenland GLHeard and McDonald Islands HMHungary HUIndia INIndonesia IDIsrael ILItaly ITJamaica JMJapan JPKenya KEKuwait KWLibya LYLuxembourg LU

Area CodeMalaysia MYMaldives MVMexico MXMonaco MCMongolia MNMorocco MANepal NPNetherlands NLNetherlands Antilles ANNew Zealand NZNigeria NGNorway NOOman OMPakistan PKPanama PAParaguay PYPhilippines PHPoland PLPortugal PTRomania RORussian Federation RU

Area CodeSaudi Arabia SASenegal SNSingapore SGSlovak Republic SKSlovenia SISouth Africa ZASouth Korea KRSpain ESSri Lanka LKSweden SESwitzerland CHThailand THTurkey TRUganda UGUkraine UAUnited States USUruguay UYUzbekistan UZVietnam VNZimbabwe ZW

Area Codes Choose an area code from this list.

Language CodeAbkhazian 6566Afar 6565Afrikaans 6570Albanian 8381Ameharic 6577Arabic 6582Armenian 7289Assamese 6583Aymara 6588Azerbaijani 6590Bashkir 6665Basque 6985Bengali; Bangla 6678Bhutani 6890Bihari 6672Breton 6682Bulgarian 6671Burmese 7789Byelorussian 6669Cambodian 7577Catalan 6765Chinese 9072Corsican 6779Croatian 7282Czech 6783Danish 6865Dutch 7876English 6978Esperanto 6979Estonian 6984Faroese 7079

Language CodeFiji 7074Finnish 7073French 7082Frisian 7089Galician 7176Georgian 7565German 6869Greek 6976Greenlandic 7576Guarani 7178Gujarati 7185Hausa 7265Hebrew 7387Hindi 7273Hungarian 7285Icelandic 7383Indonesian 7378Interlingua 7365Irish 7165Italian 7384Japanese 7465Javanese 7487Kannada 7578Kashmiri 7583Kazakh 7575Kirghiz 7589Korean 7579Kurdish 7585Laothian 7679Latin 7665Latvian, Lettish 7686

Language CodeLingala 7678Lithuanian 7684Macedonian 7775Malagasy 7771Malay 7783Malayalam 7776Maltese 7784Maori 7773Marathi 7782Moldavian 7779Mongolian 7778Nauru 7865Nepali 7869Norwegian 7879Oriya 7982Panjabi 8065Pashto, Pushto 8083Persian 7065Polish 8076Portuguese 8084Quechua 8185Rhaeto-Romance 8277Rumanian 8279Russian 8285Samoan 8377Sanskrit 8365Scots Gaelic 7168Serbian 8382Serbo-Croatian 8372Shona 8378Sindhi 8368

Language CodeSinghalese 8373Slovak 8375Slovenian 8376Somali 8379Spanish 6983Sudanese 8385Swahili 8387Swedish 8386Tagalog 8476Tajik 8471Tamil 8465Tatar 8484Telugu 8469Thai 8472Tibetan 6679Tigrinya 8473Tonga 8479Turkish 8482Turkmen 8475Twi 8487Ukrainian 8575Urdu 8582Uzbek 8590Vietnamese 8673Volapük 8679Welsh 6789Wolof 8779Xhosa 8872Yiddish 7473Yoruba 8979Zulu 9085

Language CodesUse this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.

32

Symptom

No power.

No picture.

Sound cannot be heardor is of poor quality.

The playback picture ispoor.

The unit does not startplayback.

Radio reception is poor

The remote controldoes not work properly.

The display window isdim, and the light onthe touch pad and theactive subwoofer areturned off.

B (PLAY), X, . and> buttons do notoperate.

Cause

The power cord is disconnected.

The TV is not set to receive unitsignal output.

The video cable is not connectedsecurely.

The connected TV power is turned off.

The volume is minimized.

The headphones are connected.

The MUTE button is switched on.

The disc is dirty.

An unplayable disc is inserted.

The disc is placed upside down.

The disc is dirty.

The Rating level is set.

The signal is too weak.

The remote control is not pointed atthe remote sensor of the unit.

The remote control is too far from theunit.

There is an obstacle in the path of theremote control and the unit.

The batteries in the remote controlare exhausted.

The dimmer function is activated.

This unit is in MOBILE mode.

Solution

Plug the power cord into the walloutlet securely.

Select the appropriate video input modeon the TV so the picture from the unitappears on the TV screen.

Connect the video cable securely.

Turn on the TV.

Adjust the volume.

Disconnect the headphones.

Switch off MUTE.

Clean the disc.

Insert a playable disc. (Check the disctype, color system, and regional code.)

Place the disc with the playback sidedown.

Clean the disc.

Cancel the Rating function or changethe rating level.

Adjust the antenna or connect anexternal antenna for better reception.

Point the remote control at the remotesensor of the unit.

Operate the remote control within 7 m.

Remove the obstacle.

Replace the batteries with new ones.

Switch off DIMMER.

To release the MOBILE mode, pressmode button (TUNER, DISC, USB)you want, or press HOME.

TroubleshootingCheck the following guide for the possible cause of a problem before contacting service.

Resetting the unitIf you observe any of the following symptoms... The unit is plugged in, but the power will not turn

on or off. The unit is not operating normally.

...you can reset the unit as follows: Press and hold the POWER button for at least five

seconds. This will force the unit to power off thenturn the unit back on.

Unplug the power cord, wait at least five seconds,and then plug it in again.

33

Ref

eren

ce

SpecificationsGeneral

Dimensions (approx.) 12.8 X 8 X 3 inches (326 X 215 X 78 mm) without feetMass (approx.) 2.3 kg (5 Ibs)

Operating temperature 41˚F to 95˚F (5˚C to 35˚C)Operating humidity 5 % to 90 %

Audio recording formatSampling frequency 44.1kHzCompression format MP3

Sampling bitrate 128Kbps

PlaybackFrequency response DVD (PCM 48 kHz): 20 Hz to 20 kHz, CD: 20 Hz to 20 kHz

DVD (PCM 96 kHz): 20 Hz to 44 kHzSignal-to-noise ratio More than 85 dB (SPEAKER OUT)Harmonic distortion Less than 0.007% (SPEAKER OUT)

Dynamic range More than 85 dB (SPEAKER OUT)

InputsAudio input (optical audio) 3 V (p-p), 75 Ω, Optical connector x 1

AUDIO IN 0 dBm more than 47 kohms, RCA jack (L, R) x 1

OutputsVIDEO OUT 1 Vp-p 75 Ω, sync negative, RCA jack x 1

COMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2

HDMI video/audio output 19 pin (HDMI standard, Type A)

AmplifierOutput power Front: 75W + 75W (4Ω at 1 kHz, THD 10 %)

Subwoofer: 150W (3Ω at 60 Hz, THD 10 %)

Tuner SpecificationsTuning Range (FM) 87.5 - 108 MHz

Intermediate Frequency (FM) 10.7 MHzSignal-to-noise ratio 60 dB (Mono)Tuning Range (AM) 520 - 1,720 kHz

Intermediate Frequency (AM) 450 kHzAntenna Wire antenna (FM)

Loop antenna (AM)

Designs and specifications are subject to change without notice for improvement.

SpeakersFront (J10D-SF)

Type: 2 Way 3 SpeakerImpedance: 4 Ω

Frequency Response: 100 - 20,000 HzSound Pressure Level: 82 dB/W (1m)

Max. Input Power: 150WNet Dimensions (W x H x D): 104 x 328 x 216 mm

Net Weight: 2.9 kg

Active Subwoofer (J10D-SA)Power requirements: AC 120V, 60 HzPower consumption: 90W

Type: 1 Way 1 SpeakerImpedance: 3 Ω

Frequency Response: 65 - 1,500 HzSound Pressure Level: 80 dB/W (1m)

Max. Input Power: 300WNet Dimensions (W x H x D): 216x 328 x 317 mm

Net Weight: 8.3 kg

34

Notes

35

Ref

eren

ce

Notes

This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material orworkmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date(“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the originalpurchaser of the product and effective only when used in the United States, excluding U.S. Territories.

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIEDWARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LGELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVEDAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUTLIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGEWHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental orconsequential damages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply toyou. This warranty gives you specific legal rights and you may also have other rights that may vary from state to state.

THIS LIMITED WARRANTY DOES NOT APPLY TO:

• Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,maintenance or failure to maintain, or separate system components; and

• Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outsideenvironmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current orvoltage, reception problem caused by inadequate home antenna or faulty antenna connections, computersoftware, institutional or commercial use, or other causes not arising out of defect in material or workmanship.

Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.

CUSTOMER INTER-ACTIVE CENTER NUMBERS:

WARRANTY PERIOD:

LABOR: 90 days from the Date of Purchase.

PARTS: One Year from the Date of Purchase.

* Parts replaced are warranted for the remaining portionof the original warranty period.

HOW SERVICE IS HANDLED:

Call 1-800-243-0000 for instructions on getting the defective unit repaired or replaced.

Please retain dated sales receipt and your box toreturn the unit to LG for repair or replacement.

Shipping both ways will be paid by LG during theWarranty Period. After the Warranty Period, you payinbound shipping charges and LG pays return shippingcharges.

Visit our website at: http://www.lgservice.com

For nearest Authorized Service Center, Where to buy,Product Assistance, or Customer Assistance

Call 1-800-243-0000 (24 hours a day, 365 days per year)and select appropriate options from the menu.

Or visit our website at http://www.lgservice.com

LG Electronics, Inc.Limited Warranty - USA

LG ELECTRONICS U.S.A., INC.1000 SYLVAN AVENUEENGLEWOOD CLIFFS, NJ

P/NO: MFL30582485Issue 0

Printed in China