Compact Dishwasher

7/24/2019 Compact Dishwasher

http://slidepdf.com/reader/full/compact-dishwasher 1/21



To review the section on Troubleshooting Tips

will help you to solve some common problems

by yourself .

Dear Customer ,

Please carefully reading it before using the dis hwasher will help you to use and maintain the dishwasher properly.

Pass it on to any subsequent owner of the appliance.

This manual contains sections of Safety Instructions,Operating I nstructions,Installation Instructions andTroubleshooting Tips, etc.

The manufacturer, following a policy of constant

development and updating of the product, may

make modifications without giving prior notice.

Keep it to refer to at a later date.

If you can not resolve the troubles by yourself ,

please ask for the help of professional technicians.

Dishwasher Features.................................... ...3

At te nt ion be fo re or af te r lo ad in g the Di sh wash er Baskets..........................................................6

Filtering System.............................................11Caring for the Dishwasher..................... .........12.

A Fi ll th e R in se Ai d Disp en ser. .. .. .. .. .. .. .. . ... .. .. .. 4、

B Function of Detergent .................................4、

Loading the Basket...........................................7

Cutlery Basket............................................... 8

Wash Cycle Table........................................... 9Turning on the Appliance................................ 9Change the Programme.............. ................10....

At the En d o f t he Was h C yc le.. ... .. .. .. ... .. .. .. ... .. .. 10

Positioning the Appliance................... ..........14..

Water Connection.................................. .......14.

Ab ou t P ow er Co nn ec ti on. .. .. .. .. .. .. .. .. .. .. .. . .. .. .. .1 4.

Connection of Drain Hoses..................... .......16.Start of dishwasher............................. .. ......16. . . .

Before calling for service........................... .....17.

Error codes.................................... ..............18.

Technical information.............................. .....19..

Control Panel...................................................3



1

This appliance must b e grounded. In the event of a

malfunction or breakdown, grounding will reduce

the risk of electric shock by providing a path of

least resistance of electric current. This appliance

is equipped with a cord having an equipment-grounding conductor and a grounding plug.

The plug must be plugged into an appropriate outlet

that is installed and g rounded in accordance with

all local codes and ordinances.

Keep children away from detergent and rinse aid, keepchild away from the open door of the dishwasher,there could still be some detergent left inside.

renDo not abuse, sit on, or stand on the door or dishrack of the dishwasher.

Do not touch the heating element during or immediately after use.(This instruction is only applicable to machineswith a visual heating element.)

Do not wash plastic items unless they are markeddishwasher safe or the equivalent. For plastic itemsnot so marked, check the manufacturer'srecommendations.Use only detergent and rinse additivesdesigned for an automatic dishwasher.Never use soap, laundry detergent, or handwashing detergent in your dishwasher. Keepthese products out of the re ach of children.

During installation, the power supply must notbe excessively or dangerously bent or flattened.

The door should not be left i n the open positionsince this could present a tripping hazards.

Do not tamper with controls.

Do not place any heavy objects of stand on thedoor when it is open. The appliance could tipforward.When loading items to be washed:1) Locate sharp items so that they are not likely

to damage the door seal;2 Warning: Knives and other utensils with

sharp points must be loaded in the basketwith their points down or placed in ahorizontal position.

)

When using your dishwasher, you shouldprevent plastic items from coming into contactwith heating element.(This instruction is onlyapplicable to machines with a visual heatingelement.)

If the supply cord is damaged, it must be replacedby the manufacturer or its service agent or asimilarly qualified person in order to avoid ahazard.

Please dispose of packing materials properly.Use the dishwasher only for its intended function.

Remove the door to the washing compartment whenremoving an old dishwasher from service or discardingit.

Dishwasher detergents are strongly alkaline, theycan be extremely dangerous if swallowed.Avoidcontact with skin and eyes an d keep children awayfrom the dishwasher when the door is open.

Check that the detergent receptible is emptyafter completion of the wash cycle.

The appliance is to be connected to the water mains using new hose sets and t hat old hose-setsshould not be reused.The maximum number of place settings to bewashed is 6.The maximum permissible inlet water pressure is1Mpa.The minimum permissible inlet water pressure is0.04Mpa.

Children should be supervised to ensure that they donot play with the appliance.

This appliance is not intended for use by persons(including children with reduced physical, sensory or mental capabilities, or lack of experience andknowledge ,unless they have been given supervisionor instruction concerning u se of the appliance by aperson responsible for their safety.

)

When using your dishwasher, follow the precautions listed below:

Do not operate your dishwasher unless allenclosure panels are properly in place. Openthe door very carefully if the dishwasher isoperating, there is a risk of water squirting out.

Improper connection of the equipment-grounding

conductor can result in a risk of electric shock.

Check with a qualified electrician or service

representative if you are in doubt whether the

appliance is properly grounded. Do not modify the

plug provided with the appliance; If it is not fit for

the outlet. Have a proper outlet installed by a

qualified electrician.



before using it for the first time.

To get the best performance from your dishwasher, read all operating instructions

Front view

Filter assemblyDetergent Dispenser

Cup Shelf Cutlery Basket Rinse Aid Dispenser

Inlet pipe connector

Drain pipe connector

SprayArms Basket

1 56

78

932 4

2

1 53

6 7

4

2

Back View

8 9

4

2

3

5

6

1

2

3 4

5 6

Power Button: To turn on/off the power supply.

Power Light : To be on when the ON/OFF Buttonis Pressed down.

Rinse Aid Warning Light : To be on when therinse aid dispenser needs to be refilled.

Washing Program Selector: Press the buttonto select wash cycles

Program indicator light.

Start/Reset Button: Press this button to startor pause the dishwasher, the process pilotlamp will be blinking when s tarting.



3

The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes. That can leavespots and streaks. It also improves drying by allowing water to sheet off the dishes. Your dishwasher is designed to

use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill thedispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black.The volume of the rinse aid container is about 110ml.

Rinse Aid Dispenser

Function of Rinse AidRinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.

As th e r inse ai d d imi ni shes, t he si ze o f the bl ac k d oton the rinse aid level indicator changes, as illustrated below.

Full3 / 4 full1 / 2 full1 / 4 full - Should refill to eliminate spottingEmpty

When to Refill the Rinse Aid Dispenser If there is no rinse-aid warning light in the control panel, you can judge the amount of rinse-aid by the color of the optical level indicator located next to the cap. When the rinse-aid container is full, the wholeindicator will be dark .As the rinse-aid diminishes, the size of the dark dot decreases. You should never letthe rinse aid get below 1 / 4 full.

" "

Attention!Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.

To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.

Pour the rinse aid into the dispenser, being careful not to overfill.

Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.

123

during the next wash. Don't forget to replace the cap before you close dishwasher door.

Clean up any rinse aid split during filling with an absorbent cloth to avoid excessive foaming



4

DetergentsThere are 3 sorts of d etergents

1.With phosphate and wit h chlorine2.With phosphate and without chlorine3.Without phosphate and without chloride

Based on their chemical composition, dishwasher can be split i n two basic types:

The use of normal washing programmes in conjunction with concentrated detergentsreduces pollution and is good for your dishes; these wash programmes are specially matchedto the dirt-dissolving properties of the enzymes of the concentrated detergent. For this reason

normal wash programmes in which concentrated detergents are used can achieve the same

results that can otherwise only be achieved using intensive programmes.

“ ”

“ ”“ ”

Detergent tablets of d ifferent brands dissolve at different speeds. For this reason somedetergent tablets cannot dissolve and develop their full cleaning power during shortprogrammes. Therefore please use long programmes when using d etergent tablets, toensure the complete removal of detergent residuals.

Concentrated Detergent

Detergen t Tablets

conventional, alkaline detergents with c austic componentslow alkaline co ncentrated detergents with n atural enzymes

Normally new pulverised detergent is without phosphate. The water so ftener function of phosphate is not given. In this case we recommend to fill salt i n the salt container even w hen

the hardness of water is only 6 dH. If detergents without phosphate were used in case of hard water often white spots appear at dishes and glasse s. In this case please add more detergent to reachbetter results. Detergents without chlorine do only bleach a little. Strong and coloured spots will notremoved completely. In this case please choose a programme with higher Temperature.

°

Detergent tablets are only for the models with 3 in 1 function or 3 in 1 program.

Detergents with its chemical ingredients are necessary to remove dirt, crush dirt an d transport it out of the di shwasher.and dry.

Don't put powder detergent into the dispenser until you're ready to wash dishes.Use only detergent specifically made for use in dishwashers. Keep your detergent fresh

Proper Use of Detergent

Adjusti ng Rinse Aid Dispenser The rinse aid dispenser has four settings.The recommended setting is on "3".If the dishes still are not drying properly or are spotted, adjust the dial to thenext higher number on "4".

Increase the dose if there are drops of water or lime spots on the dishes after washing.Reduce it if there are sticky whitish stains on your dishes or a bluish fil m on glassware or knife blades.



Amount of Detergent to Use

The dispenser must be refilled before the start of each wash cycle following the instructionsprovided in the Wash Cycle Table . Your dishwasher uses less detergent and rinse aid thenconventional dishwasher. Generally, only one tablespoon of detergent is needed for a normal wash load. Also, more heavily soiled items need more detergent. Always add thedetergent just before starting the dishwasher, otherwise it could get damp and will notdissolve properly.

Detergent Dispenser

Al wa ys ad d th e d eter ge nt ju st be fo re st ar ti ng ea ch wa sh cy cl e.Only use branded detergent aid f or dishwasher.

If the lid is closed: press release button. The lid springs open.

5

Detergent tablet

Detergent powder

Fill the detergent dispenser with detergent.The marking indicates the dosing levels , a sillustrated on right:

The place can load 15g detergent .

The place can load 25g detergent .

Please observe the manufacturers dosing and storageRecommendations as stated on the detergent packaging.

Close the lid and press until it locks in place.

If the dishes are heavily soiled, place an additionaldetergent dose in the pre-wash detergent chamber. This detergent will take effect during the pre-wash phase.

A

B

Fill in detergent

You find information about the amount of detergent for the single programme on the last page.

Please aware, that according to the level soiling and the specific hardness of water differences are possible.

Please observe the ma nufacturer's recommendations on the detergent packaging.

Dishwasher detergent is corrosive! Take care to keep it out of reach of children.



6

Cutlery with wooden, horn china or mother-of-pearl handlesPlastic items that are notOlder cutlery with glued parts that is nottemperature resistantBonded cutlery items or dishesPewter or cooper itemscrystal glassSteel items subject to rustingWooden plattersItems made from synthetic fibres

heat resistant

Some types of glasses can becomedull after a large number of washes

Silver and aluminium parts have atendency to discolour during washing

Glazed patterns may fade if machinewashed frequently

Are not suitable Are of limited suitability

Use a mild detergent that is described as 'kind of di shes'. If necessary, seek further

information from d etergent manufacturers.For particular items, select a p rogramme with as low a temperature.To prevent damage, do not take gla ss and cutlery out of the dishwasher immediatelyafter the programme has ended.

Consider buying utensils which are identified as dishwasher-proof.

Dishes and items of cutlery must not lie inside on e another, or cover each other.To avoid damage to glasses, they mus t not touch.Load large items which are most difficult to clean into the basket.Long bladed knives stored in an upright position are a potential hazard!Long and/or sharp items of cutlery such as carving knives must be positionedhorizontally in the basket.Please do not overload your dishwasher. This is important for good results and for reasonable energy consume.

Load hollow items such as cups, glasses, pans etc. With the opening downwards so thatwater cannot collect in the container or a deep base.

(For best performance of the dishwasher, follow these l oading guidelines.Features and appearance of baskets and cutlery baskets may vary from your model.)

Scrape off any large amounts of leftover food. Soften remnants of burnt food in pansIt is not necessary to rinse the dishes under running water.Place objects in the dishwasher in following way:1.Items such as cups, glasses, pots/pans, etc. are face down.2.Curved items, or those with recesses, should be loaded at a slant so that water can run off.3.All utensils are stacked securely and can not tip over.4.All utensils are placed in the way that the spray arms can rotated freely during washing.

Very small items should not be washed in the dishwasher as they c ould easily fall out of the basket.



7

Position the dishes and cookware so that they will not get moved by the spray of water.

Loading the Basketoading the Basket

Plate racks of BasketThe baske t is fitted with plate racks whichcan be stowed horizontal if required.

IN Saucers

4

Serving bowl

3

Glasses

1

Cups

6

Oval platter

7

Dinner platesBread andbutter plates

8

Fruit bowl

5

Cutlery basket

9

2

7 2

3

45

6

9

8

1 1



8

Cutlery should be placed in the cutlery basket with handles at the bottom. If the rack has side baskets, the spoonshould be loaded individually into the appropriate slots, especially long utensils should be placed in t he horizontalposition at the front of the upper basket as shown.

Do not let any item extend through bottom. Al wa ys load sh ar p u tens il s w it h th e shar p poin t do wn !

3 2 5

2

6

5

23

34

4

4

4

1

1

Teaspoons

3

Dinner forks1

Serving forks6

Serving spoons5

Knives

4

Salad forks2

23

1 44

1 4

4 4

44 4

4 1

14

2 3

2 3



9

Means: need to fill rinse into the Rinse-Aid Dispenser.( )

*AHAM DW-1-2005 : This program is the test cycle, the rinse-aid dispenser setting is recommended to Position 6.

Starting a wash cycle...Draw out the basket(see the section entitled Loading the Dishwasher ).Pour in the detergent (see the section entitled Salt, Detergent and Rinse Aid ).

Insert the plug into the socket. The power supply is 120V/60 Hz

Make sure that the water supply is turned on to full pressure.

“ ”

“ ”

Press the program button to select wash program you need

Then press the Start/Reset button, the dishwasher begins to start.Heavy->Normal->Speed

When you press the St art/Reset button to pause during washing,the program light will s top blinking and the dishwasher will mooingevery minute unless you press the Start/Reset button to start.

For normally soiled loads,such as pots, plates, glassesand lightly soiled pans.standard daily cycle.

3in1 14 0 8.40.70

Pre-wash 50Was h ( 70 )RinseRinseRi ns e (7 0 )Drying

（ ℃ ）

℃

℃

For the heaviest soiled loads,such as pot s,pans,casseroledishes and dishes that havebeen sitting with dried foodon them for a while.

3/15 g. 145 0.94 11.0Intensive

For normally soiled loads,such as pots, plat es, glassesand lightly soiled pans.

standard daily cycle.

3/15 g. 125 0.70 8.4

Pre-washW as h (6 0 )RinseRi nse ( 70 )

Drying

℃

℃Normal

A sh or te r wa sh fo r li ghtlysoiled loads that do notneed drying.

15 g. 30 6.0Rapid

0.30

For lightly soiled loads, suchas plates, glasses, bowls andlightly soiled pans.

170 0.63 8.4

Pre-washW as h (5 5 )

(70 )Drying

℃

℃

RinseRinse

Pre-washW as h (6 0 )

(70 )Drying

℃

℃

RinseRinse

W as h (4 5 )

(60 )Drying

℃

℃

RinseRinse

(EN 50242)

Ec o 3/15 g.

For lightly soiled loads,such as glasses, crystal andfine china.

75 0.48 6.8

W ash (4 0 )℃

RinseRinse

Glass15 g.



It is dangerous to open the door when washing, because the hot water may scald you.

When the working cycle has finished, the buzzer of dishwasher will sound 8 seconds, then stop. Turn off the appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher.Wait a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while theyare still hot and more susceptible to breakage. They will also dry better.

Switch Off the Dishwasher , only in this case the programme has ended.

1.Switch off the dishwasher by pressing the ON/OFF button.2.Turn off the water tap!

e Al l th ph ase li gh ts ar e off

Open the door carefully.Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutesbefore removing from the appliance.Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way theywill be cooler and the drying will be improved.

Unloading the dishwasher It is normal that the dishwasher is wet inside.

will keep on working after 10 seconds.

If you open the door when washing, the machine will pause. When you close the door , the machine

10

A forgotten dish can be added any time before the detergent cup opens.

Add forgotten dishes.

Close the door

After the spray arms stop working,you can open the door completely.

2

3

Open the door a little to stop the washing.

1 4

5

6

Premise:Otherwise, the detergent may have already been

released, and the appliance may have already drained the wash water. If thisis the case, the detergent dispenser must be refilled (see the section entitled" Loading the Detergent " ).

Press Start/Reset Button more than three seconds the machine will be in standby state ,then you can change the program to the desired cycle setting (seethe section entitled " Starting a wash cycle. . ." ).

NOTE: If you open the door during washing, the machine will pause. When youclose the door and press the start/reset Button, the machine will keep onworking after 10 seconds.

The lights show the state of the dishwasher:a ) A ll l ig hts o ff --- -- -- --- ---- -- -- --- --- -- -- -- --- -On s ta nd b yb ) On e o f t he gh ts o n------ ----- ------- --- -Bei ng p au sedc) One of the blinking----------------------R unning

You can modify the washing program, When the dishwasher justruns for a short time.

Program indicator

Program indicator li

Program indicator light

Press the start/reset button

Press the start/reset button, the dishwasher will runafter 10 seconds.



The filter prevent larger remnants of food o r other objects from getting inside the pump.

The filter system consists of a coarse filter, a flat (Main filter)

and a micro filter (fine fil ter).

Food and soil particles trapped by this filter are pulverized by a

special jet on the spray arm a nd washed down to drain.

Main filter 1

Larger items, such as pieces of b one or glass, that could block

the drain are trapped in the coarse filter. To remove the items

caught by the filter, gently squeeze the tap on the top of this

filter and lift out.

Coarse filter 3

This filter holds soil and food residue in the sump area and

prevents it from being redeposit on the dishes during wash cycle.

Fine filter 22

3

1

Filter assemblyThe filter efficientlyFor best performance and results, the filter assembly must be regularly. this reason, it is a good idea toremove the larger food particles trapping in the filter after each wash cycle by rinsing the filter and cup un der running water. To remove the filter assembly, pull on the cup handle in the upward direction.

removes food particles from the wash water, allowing it to be re-cyclated during the cycle.For

Never run the dishwasher without the filters in place.The dishwasher must never be us ed without the filters.Improper replacement of the filter may reduce the performance level of the applianceand damage dishes and utensils.

the filter system will be installed.

If do it from step1 to step 3, the filter system will be removed; while if do it from Step 3 to Step 1,

11

Step１：contrarotate the Fine ,

lift it up;Step2:

filter

Step3：lift the Main filter up

2

1

3



The control panel can be cleaned by using a lightly dampened cloth and dry thoroughly.

The exterior use a good appliance polish wax.

Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.

Protect Against Freezing

1.Cut off electrical power to the dishwasher.2.Turn off the water supply and disconnect the water inlet pipe from the water valve.3.Drain water from the inlet pipe and water valve. (Use a pan to catch the water)4.Reconnect the water inlet pipe to the water valve.5.Remove the filter at the bottom of the tub and use a sponge to use up water in sump.

please take frost protection m easures on dishwasher in winter. E fter washing cycles,

please operate as follows

ach time a

：

- Inspect the filters for blocking e very time the dishwasher has been used.- By unscrewing the coarse filter.you can remove the filter system.Remove any food remnants and

clean the filters under running water.

Remarks:

Cleaning The Filter

Cleaning The Door

To clean the coarse filter and the fine filter, use a cleaning brush. Reassemble the filter parts as shown in the figuresin the last page and reinsert the entire assembly in the dishwasher, positioning in its seat and pressing downward.

The entire filter assembly should be cleaned once a week.

When cleaning the filters, don't knock on them. O therwise, the filters could becontorted and the performance of dishwasher could be debased.

To clean the edge around the door, you should use only a soft warm,

damp cloth. To avoid penetration of water into the door lock and

electrical components, do not use a spray cleaner of any kind.

Never use a spray cleaner to clean the door panel as it may damage the door lock

and electrical c omponents.

Abra si ve ag ent or some pap er to we l s ho uld not be us ed be ca us e o f th e r isk o f

scratching or leaving spots on the stainless steel surface.

12

If your dishwasher cannot work because of the ice, p lease contact professional service persons.



It is recommend that you run a wash cycle with thedishwasher empty and the n remove the plug from thesocket, turn off the water supply and leave the door of the appliance slightly open. This will help the door seals to ast longer and prevent odours from formingwithin the appliance.

If the appliance must be moved, try to keep it in thevertical position. If absolutely necessary, it can bepositioned on its back.

One of the factors that cause odors to form in thedishwasher is food that remains trapped in the seals.Periodic cleaning with a damp sponge will prevent thisfrom occurring.

Af ter ever y was h, tu rn off the wa ter sup pl y t o th eappliance and leave the door slightly open so thatmoisture and odors are not trapped inside.

Before cleaning or performing maintenance, always

remove the plug from the socket.

To clean the exterior and rubber parts of the dishwasher,do not use solvents or abrasive cleaning products.Only use a cloth with warm soapy water.To remove spots or stains from the surface of theinterior, use a cloth dampened with water with a littlevinegar, or a cleaning product made specifically for dishwashers.

Af te r Ev er y Wash

Remove the Plug

No Solvents or Abrasive CleaningMoving the Appliance

Seals

When it is not in need for a long time

13

The installation of the pipes

and electrical equipments

should be done by professionals.

Electrical Shock HazardDisconnect electrical power beforeinstalling dishwasher.

Failure to do so can result in deathor electrical shock.

The installation position of dishwasher should be near the existing inlet and drain

hoses and power cord.

One side of the cabinet sink should be chosen to facilitate the connection of drain

hoses of the dishwasher.

Cleaning the Spray Arms

The spray arms can be easily removed for periodic cleaningof the nozzles, to prevent possible clogging. Wash themunder running water and carefully replace them in their seats,checking that their rotary movement is in no way impeded.

Grasp the middle of the spray arm, pull it upwards to removeit. Wash the arms under a jet of running water and return them

carefully to their seat. After reassembly, check that the sprayarms turn freely. Otherwise, check that they have beeninstalled correctly.



Ensure the voltage and frequency of the power being corresponds tothose on the rating plate. Only insert the plug into an electrical socket which is earthedproperly. If the el ectrical socket to which the appliance must be c onnected is not

appropriate for the plug , replace the socket, rather than using a adaptors or the l ike asthey could cause overheating and burns.

Please look at the rating label to know the rating voltage and connect the dishwasher to the appropriate power supply.Use the required fuse 10 amp, time delay fuse or c ircuit breaker recommended and provide separate circuit servingonly this appliance.

This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of

electric shock by providing a path of least resistance for the electric current. This appliance is equipped witha cord having an equipment-earthing conductor and an earthing plug. The plug must be plugged into an

appropriate outlet that is installed and earthed in accordance with all local standards and requirements.

For personal safety:

DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE EARTHINGCONNECTION FROM THE POWER CORD.

14

for personal safety:DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE

FROM THE POWER CORD.

EARTHING

CONNECTION

Improper connection of the equipment earthing conductor can result in the risk of an

electric shock.Check with a qualified electrician or service representative if you are in doubt whether the

appliance is properly earthed.Do not modify the plug provided with the appliance. If the plug does not fit properly to theoutlet, please have a qualified electrician to install a proper outlet.

and the sides, along t he adjacent cabinets or wall. The dishwasher is equipped with water supplyPosition the appliance in the desired lo cation. The back should rest against the wall behind it,

and drain hoses that can b e positioned to the right or the left to facilitate proper installation.



Your dishwasher comes equipped with a 'quick connect' assembly (includes inlet and drain hose). Thefaucet adapter must be installed on the faucet before you can connect the dishwasher. This adapter isincluded inside your dishwasher. The faucet adapter is compatible with faucets inclusive of either male(outside) or fe male (inside) threaded faucet connections.

In order to avoid that there is more water staying in the inlet hose, please close the faucet after using.

15

Back View



16

Screw the faucet ada pter onto (or into) th e faucet tap. Check for leaks (use Teflon tape to eliminate if necessary).

Connect the six-sided connection of the drain hose to the drain port connection on the back of thedishwasher cabinet. Do not over-tighten (to avoid damage to threads).

Connect the star-shaped connection of the inlet hose to the inlet port on the back of the dishwasher cabinet. Do not over-tighten (to avoid damage to threads ).

Connect the circular connection of the drain hose onto the longer (bottom) male connection on the quickconnect.

Connect the circular connection of the inlet hose onto the shorter (top) male connection on the quickconnect.

At ta ch th e qu ic k co nn ec t onto th e fauc et adapter, by pu ll in g down th e ou te r lo ckin g co llar on the qu ickconnect, while pushing the quick connect upward onto the faucet adapter.

When the quick connect snaps onto the faucet adapter, release the locking collar. Verify the connectionis secure.

Slowly open the hot water line a nd check for any sign of water leaks at a ll hose connections. If leaks arelocated, immediately close the water supply and repair the hose connections.

1

2.

3.

4.

5.

6.

7.

8.

．

I m p o r t a n t

WARNING

1. Once you open the water supply line, (even if it is closed immediately thereafter), the inlet hose will bepressurized.2. To relieve water pressure from inside the inlet hose, (make sure the water line (faucet) is closed): pr essand hold the red pressure relief button on the quick connect until the flow of water stops.

Shut off the water supply at the faucet.Disconnect the power supply cord

NOTE:

Hard water conditions will adversely affect the washing performance of your dishwasher. Hardwa te r co n d it io n s w i l l a lso co n tr i b u te to ' l ime ' (wh it e f i lm su b sta n ce ) d e p o sits a n d /o r ' sca l in g ' o n th est ainless steel surf ace of th e dis hwasher tub and heater element, loc ated in the sum p underneathth e r e mo va b le f i l te r scr e e n . To a ssist in min i mizin g th e se co n d it io n s, i t is r e co mme n d ed toperiodically operate/rinse the inside of the dishwasher (empty) using 1 cup of white vinegar at leastonc e a week.

1.2.

D i sconnect i ng your D i shw asher

FAILURE TO RELIEVE WATER PRESSURE, BEFORE DISCONNECTING THE QUICK-CONNECTFROM THE FAUCET, WILL RESULT IN B ACK -PRESSURE OVER-SPRAY. THE TE MPERATURE OFINCOMINGWATER CAN B E VERY HOT, AND BACK -PRESSURE OVER-SPRAY COUL D CAUSESEVERE BURNS AND/OR SCALDING.

DO NOT LET CHILD REN DISCONNECT THE DISHWASHER; CLOSE SUPERVISION OF CHILDR EN IS A LWAYS IMP ORTANT ARO UND A PPL IA NC ES.

DANGER

The following things should be c hecked before starting the dishwasher.

1 The dishwasher is level and fixed properly

2 The inlet valve is open

3 There is a leakage at the connections of the conducts

4 The wires are tightly connected

5 The power is switched on

6 The inlet and drain hoses are knotted

7 All packing materials and printings should be taken out from the dishwasher

The content of this manual is very helpful to the users.

Af te r in st alla ti on , pl ea se ma ke sure to kee p this manu al .



Fuse blown, or the

circuit breaker tripped.

Replace fuse or reset circuit breaker. Remove any other

appliances sharing the same circuit with the dishwasher

Spilled rinse-aid Always wipe up rinse-aid spills immediately.

Hard water minerals

The affected items are

not corrosion resistant.

The lid of softer

is loose.

The sp ay arm is

knocking against

an item in a basket.

r

Item of crockery

are insecurein the wash cabinet.

This may be caused

by on-site installation

or the cross-section of the piping.

A programme was not

run after dishwasher

salt was added.

Traces of salt have

got into the wash cy le.c

To clean the interior, use a damp sponge with

dishwasher detergent and wear rubber gloves.

Never use any other cleaner than dishwasher

detergent for the risk of foaming or suds.

Always run the Quick wash programme .

without any crockery in the dishwasher and

without selecting the Turbo function (if present),

after adding dishwasher salt.

Check the lip .Ensure the fix is fine.

Interrupt the programme, and rearrange the items

which are obstructing the sp ay arm.r

Interrupt the programme,

and rearrange the items of crockery.

This has no influence on dishwasher function.

if in doubt, contact a suitably qualified plumber.

Detergent withcolourant was used.

Make sure that the detergent is the one withoutcolourant.

Improper detergent

Make sure the dishwasher is turned on and the door is

closed securely.

Closed dishwasher making sure that door latches.

Make sure the power cord is properly plugged into the

wall socket.

Power supply is not

turned on.

Door of dishwasher not properly closed.

Kink in drain hose

Filter clogged.

Kitchen sink clogged.

Check drain hose.

Check coarse the filter.

(see section titled )" Cleaning The Filter "

Check kitchen sink to make sure it is draining well.

If problem is kitchen sink not draining ,you may need

a plumber rather than a serviceman for dishwasher.

Use only the special dishwasher detergent to avoid

suds. If this occurs, open the dishwasher and let sudsevaporate. Add 1 gallon of cold water to the tub. Close

and latch the dishwasher, then Start the "soak" wash

cycle to drain out the water . Repeat if necessary.

17

Technicalproblems

Generalproblems

Noise



The dishes were not

loaded correctly.

See notes in " Loading the Dishwasher Baskets ".

Select a more intensive programme.

See" Wash Cycle Table ."

Use more detergent, or change your detergent.

Rearrange the items so that the sp ay can rotate freely.r

Clean and/or fit the filter combination correctly.

Clean the sp ay arm jets. See "Cleaning the Spray

Arms".

r

Use less detergent if you have soft water and select

a shortest cycle to wash the glassware and to get

them clean.

Use a mild abrasive cleaner to eliminate those marks.

Re-loading the dishes properly.

Load the dishwasher as suggested in the directions.

Increase the amount of rinse-aid/Refill the rinse-aid

dispenser.

Do not empty your dishwasher immediately after

washing. Open the door slightly so that the steam can

escape. Begin unloading the dishwasher only once t

he dishes are barely warm to the touch. Empty the low

basket first. This prevents water form dropping off dishes in the upper basket.

In short programmes the washing temperature is lower.

This also lowers cleaning performance. Choose aprogramme with a long washing time.

Water drainage is more difficult with these items.

Cutlery or dishes of this type are not suitable for washing in the dishwasher.

The programme was

not powerful enough.

Not enough detergentwas dispensed.

Item are blockingthe path of sp ay arms.r

The filter combinationin the base of washcabinet is not clean or is not correctly fitted.This may causethe sp ay arm jetsto get blocked.

r

Combination of softwater and too muchdetergent.

Aluminum utensilshave rubbed againstdishes.

Dishes blockdetergent cups.

Improper loading

Too little rinse-aid

Dishes are removedtoo soon.

Wrong programmeselection

Using cutlery witha low-quality coating

If overflow occurs, turn off the main water supply before calling a service.If there is water in the base pan because of an overfill or small leak,the water should be removed before restarting the dishwasher.

18

Unsatis-factorywashingresult

Unsatis

-factorydryingresult

When some malfunctions come on, the appliance will display error codes to warn you:

Longer inlet time. Faucets is not opened, or water intake is restricted,

or water pressureis too low.

Some element of dishwasher leaks .Overflow.



Height : 438mmWidth : 550mm

Depth : 500mm

Voltage connected Load : see rating label

Water pressure: 0.04-1.0MPa

Hot water connect ion : max 60 ℃

Power supply: see rating label

Capacity: 6 Place settings

Compact Dishwasher

Documents

Transcript of Compact Dishwasher