Comp Selection 3

BITZER Output data

Created on : 06/08/2013 20:03:14

Customer : PT. Besmindotama SemestaSupllier : PT. Erwin TehnikCompressor Selection

BITZER Software v6.3.2 rev900 06/08/2013 / All data subject to change. 2 / 5

Table of content

Compressor Selection: Semi-hermetic Reciprocating Compressors......................................................................... 3Technical Data: 4VES-10Y........................................................................................................................................ 4Semi-hermetic Reciprocating Compressors.............................................................................................................. 5



Compressor Selection: Semi-hermetic Reciprocating Compressors

Input ValuesCompressor model 4VES-10YMode Refrigeration and Air

conditioningRefrigerant R404AReference temperature Mean temperatureEvaporating SST -30,00 CCondensing SDT 45,0 CLiquid temperature 45,0 CSuct. gas superheat 10,00 KOperating mode AutoPower supply 230V-3-50HzCapacity Control 100%Useful superheat 100%ResultCompressor 4VES-10Y-25PCapacity steps 100%Cooling capacity 5,01 kWCooling capacity * 6,16 kWEvaporator capacity 5,01 kWPower input 4,27 kWCurrent (230V) 16,23 AVoltage range 220-240VCondenser Capacity 9,27 kWCOP/EER 1,17COP/EER * 1,45Mass flow 203 kg/hOperating mode StandardDischarge gas temp. w/o cooling 85,2 C

Tentative Data.*According to EN12900 (20C suction gas temp., 0K liquid subcooling)

Legendadditional cooling or suction gassuperheat



Technical Data: 4VES-10YDimensions and Connections

Technical DataTechnical DataDisplacement (1450 RPM 50Hz) 34,73 m3/hDisplacement (1750 RPM 60Hz) 41,92 m3/hFrequency rangeNo. of cylinder x bore x stroke 4 x 55 mm x 42 mmWeight 139 kgMax. pressure (LP/HP) 19 / 32 barConnection suction line 28 mm - 1 1/8''Connection discharge line 22 mm - 7/8''Oil type R134a/R407C/R404A/R507A/R407A tc70C: BSE55 (Option)Oil type R22 (R12/R502) B5.2(Option)Motor dataMotor version 1Motor voltage (more on request) 220-240V PW-3-50HzMax operating current 34,6 AWinding ratio 50/50Starting current (Rotor locked) 103,0 A Y / 172,0 A YYExtend of deliveryMotor protection SE-B1Enclosure class IP65Vibration dampers StandardOil charge 2,60 dmAvailable OptionsDischarge gas temperature sensor OptionStart unloading OptionCapacity control 100-50% (Option)Capacity Control - infinite 100-10% (Option)Additional fan OptionOil service valve OptionCrankcase heater 0..140 W PTC (Option)Oil level monitoring OLC-K1 (Option)Sound measurementSound power level (+5C / 50C) 69,5 dB(A) @ 50HzSound power level (-10C / 45C) 70,5 dB(A) @ 50HzSound pressure level @ 1m (+5C / 50C) 61,5 dB(A) @ 50HzSound pressure level @ 1m (-10C / 45C) 62,5 dB(A) @ 50Hz



Semi-hermetic Reciprocating CompressorsMotor 1 = e.g. 4TES-12 (4TCS-12.2) with 12''HP'', primary for air-conditioning (e.g. R22,R407C) and air-conditioning withR134a at high ambient temperaturesMotor 2 = e.g. 4TES-9 (4TCS-8.2) with 8''HP'', universal Motor for medium and low temperature application (e.g. R404A,R507A, R407A, R407F) and air-conditioning with R134a.Motor 3 = e.g. 4TES-8, for medium temperature applications and R134aFor more information concerning the application range use the ''Limits'' button.

Operation modes 4VES-7 (4VCS-6.2) to 6FE-44 (6F-40.2) and 44JE-30 (44J-26.2) to 66FE-88 (66F-80.2) withR407F/R407A/R22:CIC = liquid injection with low temperature application, suction gas cooled motor

ASERCOM certified performance data:The Association of European Refrigeration Component Manufacturers has implemented a procedure of certifyingperformance data. The high standard of these certifications is assured by:-- plausibility tests of the data performed by experts-- regular measurements at independent institutesThese high efforts result in the fact that only a limited number of compressors can be submitted. Due to this not allBITZER compresors are certified until now.Performance data of compressors which fulfil the strict requirements may carry the label ''ASERCOM certified''. In thissoftware you will find the label at the respective compressors on the right side below the field ''result'' or in the print out ofthe performance data. All certified compressors and further information are listed on the homepage of ASERCOM(www.ASERCOM.org).

Condensing capacity:The condensing capacity can be calculated with or without heat rejection. This option can be set in the menuPROGRAM/ OPTIONS. The heat rejection is constantly 5% of the power consumption. The condensing capacity is to befound in the line Condensing cap. (with HR) resp. Condensing capacity.

Data for sound emission:Data based on 50Hz application (IP-units 60Hz) and R404A.Sound pressure level: values based on free field area with semi-spherical sound emissions at 1 meter distance.For more information see Technical Information ''Sound Data''.Legend of connection positions according to ''Dimensions'':

1 High pressure connection (HP)2 Discharge gas temperature sensor (HP)3 Low pressure connection (LP)4 CIC system: spray nozzle (LP)4b CIC sensor5 Oil fill plug6 Oil drain (magnetic screw)7 Oil filter8 Oil return (oil separator)9 Oil and gas equalization (parallel operation)9a Gas equalization (parallel operation)9b Oil equalization (parallel operation)10 Crankcase heater11 Oil pressure connection +12 Oil pressure connection -13 Cooling water connection16 Connection for differential oil pressure switch ''Delta-P''

Table of contentCompressor Selection: Semi-hermetic Reciprocating CompressorsTechnical Data: 4VES-10YDimensions and ConnectionsTechnical Data

Semi-hermetic Reciprocating Compressors

Comp Selection 3

Documents

Transcript of Comp Selection 3