Commonly Requested Purge & Pressurization Options
-
Upload
dayo-idowu -
Category
Documents
-
view
221 -
download
0
Transcript of Commonly Requested Purge & Pressurization Options
-
7/25/2019 Commonly Requested Purge & Pressurization Options
1/2
Commonly Requested Purge & Pressurization Options
1.What mounting options are available?
Panel Mount: The pneumatic regulators and valves sit inside the pressurized enclosure.The unit requires an external sensor to measure local atmospheric pressure.
Remote Purge System: You can locate the purge system aay !rom the enclosure"
although the distance should not #e too great. $e ould #e delighted to advise.
Relief Valve: This is normally sited diagonally opposite the purge air inlet. %lternative
positions are possi#le" i! the purge air !lo thoroughly circulates through the enclosure.
Complex enclosures may require a purge test to prove the purge system is e!!ective.
SmartPurge II: ere the Relie! 'alve is part o! the main enclosure. The intrinsically( sa!e
purge air inlet valve is located separately.
2. What is the largest pressurize en!losure size?
Our )*C*x+%T*, certi!ication ena#les us to deliver certi!ied enclosures up to --/ litres
0 12//mm x 23//mm x 2///mm.
The enclosure size can #e much larger. $e sometimes ship enclosures in sections" !or on(
site assem#ly. oever" the air(!lo rate and distri#ution requires s4illed design. 5arge
complex enclosures may require a purge test that proves the purging is e!!ective.
". What output s#it!hes are available?
*xpo6s expertise supports all electrical requirements and local variations. Common
customer requests include:
$P% option&7rings system(generated pneumatic signals to 2+38 9PT #ul4head !ittings" so
you can pipe the signal onard.
$IS option: has an internal sitch or sitches.
$IS '(purge option: These units are !or ivision 1+;one 1 installation. The +)< option
delivers an encapsulated internal sitch:
5a#elled as *x m =%T*," >anu!acturers eclaration? and hermetically sealed =@
-
7/25/2019 Commonly Requested Purge & Pressurization Options
2/2
)ncorporates poer inter!acing relays & terminals ithin the =*x e? product enclosure
A
)ncludes poer()nterloc4 terminals 0 up to 1/'ac+D% or 13'C+%A