Commercial Packaging Solutions - CHL Horizontal Loaderwith integrated Case Erector and Sealer 5365...

2
CHL Horizontal Loader with integrated Case Erector and Sealer 5365 East Center Drive, N.E. • Canton, Ohio 44721 • Phone: 1-800-521-9072 • Fax: 330-456-4644 • www.combi.com The CHL horizontal loading system provides flexibility by opening, loading and sealing a case that is laying horizontally, thereby decreasing the footprint of the system and accommodating a wider range of products. The CHL is integrated with the Combi HCE case erector and also features a sealer equipped with your choice of pressure sensitive tape or hot melt glue. Whether your product requires upstacking, downstacking, or progressive collation, the compact CHL is adaptable to your product and your floor- space requirements. This custom designed system allows for many pack patterns and product sizes on the same machine and offers many collation methods for product grouping and orientation. Actual speed for a system can be determined after reviewing product and case samples. Progressive upstacking collates and stages product for loading Integrated case sealing with pressure sensitive tape or hotmelt glue

Transcript of Commercial Packaging Solutions - CHL Horizontal Loaderwith integrated Case Erector and Sealer 5365...

Page 1: Commercial Packaging Solutions - CHL Horizontal Loaderwith integrated Case Erector and Sealer 5365 East Center Drive, N.E. • Canton, Ohio 44721 • Phone: 1-800-521-9072 • Fax:

CHL Horizontal Loaderwith integrated Case Erector and Sealer

5365 East Center Drive, N.E. • Canton, Ohio 44721 • Phone: 1-800-521-9072 • Fax: 330-456-4644 • www.combi.com

The CHL horizontal loading system provides flexibility by opening, loading and sealing a case that is laying horizontally, thereby decreasing the footprint of the system and accommodating a wider range ofproducts. The CHL is integrated with the Combi HCE case erector and also features a sealer equipped with your choice of pressure sensitive tape or hot melt glue. Whether your product requires upstacking, downstacking, or progressive collation, the compact CHL is adaptable to your product and your floor-space requirements.

This custom designed system allows for many pack patterns and product sizes on the same machine and offers many collation methods for product grouping and orientation. Actual speed for a system can be determined after reviewing product and case samples.

Progressive upstackingcollates and stagesproduct for loading

Integrated case sealing with pressure sensitive tape orhotmelt glue

Page 2: Commercial Packaging Solutions - CHL Horizontal Loaderwith integrated Case Erector and Sealer 5365 East Center Drive, N.E. • Canton, Ohio 44721 • Phone: 1-800-521-9072 • Fax:

CH

L H

oriz

onta

l Loa

der

5365 East Center Dr. NE Canton, OH 44721Phone: 1-800-521-9072 Fax: 330-456-4644 www.combi.com

© 2015 Combi Packaging Systems LLC

Standard Features:• One Piece Tubular Welded Frame with Steel-It Paint• High Volume Vacuum with Positive Two Panel Case Opening• Positive Major & Minor Flap Folding• 2 Axis Independent Servo System and Controller Servo Drive Case Indexing System with Self-Contained I.O. Electrical Controls• Product Infeed Brake and Gate Mechanism with Back Pressure Relief• Product Pushing Unit with Two-Stage Cylinder and Product Collation Area to Stage and Load Product into the Waiting Cases• Descending Stacker for Multiple Layers of Product• Horizontal Case Discharge • Up to 10 Different Case Size Settings

Products that can be packed moreefficiently when horizontal:

• Nested Cups, Paper Plates • Chipboard Cartons • Shrink & Cello-Wrapped Product • Multi-packs • Paper Towels, Toilet Tissue Rolls • Caulking Tubes • In-Wall Ironing Boards • Rolled Roofing Material • Tape Rolls • Wallpaper Rolls • Wrapping Paper Rolls • Car Mats

Distributed by:

Electric:240 volt / 3 Phase / 60 hz / 20 aPneumatic:80 psi clean air supply (Consumption depends on the product)

Model

Case Size Min (LxWxH)

Case Size Max (LxWxH)

Speed: Cases per Minute*

CHL HCE** 10 x 6 x 8” 254x152x203mm

24 x 16 x 16” 610x406x406mm

6-15

* Product and case size dependent ** Available in wide body