COMMERCIAL, INDUSTRIAL & FIRE PROTECTION METAL VALVES

COMMERCIAL, INDUSTRIAL & FIRE PROTECTION METAL VALVES

NCI-MV-0813EN

YOUR SINGLE SOURCE SOLUTIONNCI Canada Inc. is a Canadian national master distributor of high quality valves, fittings, pipes and related products serving residential, commercial, industrial, fire protection and irrigation markets through the wholesale, retails and OEM channels.

We offer a large selection of high quality metal valves. As a single source supplier, we contribute to your success by providing dependable products at reduced supply chain costs.

Ball Valves

Gate Valves

Globe & Angle Valves

Check Valves

Butterfly Valves

Fire Protection Valves

................................................1-2

....................................................3

....................................................4

....................................................5

....................................................6

................................................7-8

For the most updated information, visit us at www.ncicanada.com

Customer Service : Tel. 905-727-5545 • Toll-free. 1-800-268-3509 • Fax. 905-727-4088 www.ncicanada.com

NIBCO One Piece Bronze Ball Valve

T560-BR-20/T-560-BR-66600 CWP, Size 1/4”- 2”

Threaded Ends

NIBCO Two Piece Bronze Ball Valve

T or S-580-70 /T or S-580-70-66, (T or S-585-70/T or S-585-70-66)600 CWP, Size 1/4”-3” (1/4”-2)

Threaded or Solder Ends

NIBCOTwo Piece BRZ Hose End Ball Valve

T or S-585-70HC/T or S-585-70-66-HC

600 CWP, Size 1/2”-3/4”Threaded Ends

NIBCOTwo Piece Bronze Single Union BLV.

T or S-585-70SU600 CWP, Size 1/2”-2”

Threaded or Solder Ends

NIBCOTwo Piece Bronze Act. Mount BLV.

TM-585-70-66600 CWP, Size 1/2”- 2 1/2”

Threaded Ends

NIBCOTwo Piece Bronze 250lb Steam BLV.

T-585-70-66-ST600 CWP / 250 SWP, Size 1/2”-2”

Threaded Ends

NIBCOTwo Piece Bronze Safety Vent BLV.

T-580-70-SV, Size 1 1/4”-2”T-585-70-SV, Size 1/4”- 1”

600 CWP, Threaded or Solder Ends

NIBCOTwo Piece Bronze UL/LP Gas BLV.

T-580-70-UL, Size 1 1/4”-3”T-585-70-UL, Size 1/4”- 1”250 CWP, Threaded Ends

NIBCOBronze 3-way Ball Valve

T-585-70-W3, Size 1 1/4” - 2”T or S-585-70-W3, Size 1/2” - 1”

400 CWP, Threaded or Solder Ends

NIBCOThree Piece Bronze Ball ValveT or S-590-Y/T or S-590-Y-66600 CWP, Conventional Port

Size 1/4” - 3”Threaded or Solder Ends

NIBCOThree Piece Bronze Ball Valve

T-590-Y-UL 600 CWP, 175 PSI LP Gas,

Conventional Port, Size 1/4” - 3”Threaded Ends


T or S-595-Y/T-595-Y-SS/T or S-595-Y-66/T-595-Y-66-SS

600CWP, Full Port, Size 1/4” - 2 1/2”Threaded or Solder Ends


TS-595-Y600 CWP, Conventional Port

Size 1/4” - 2”Threaded x Solder Ends


T-595-Y-UL600 CWP, 175 PSI LP Gas, Full Port

Size 1/4” - 2”Threaded Ends


CS-595-YX/CS-595-YX-66/CE200 PSI Medical Gas, Full Port,

Size 1/2” - 2”Solder Ends


G-590-Y/G-590-Y-66600 CWP, Conventional Port,

Size 1 1/2” - 2 1/2”Grooved Ends

Ball Valves


1


G-595-Y/G-595-Y-66600 CWP, Full PortSize 1 1/2” - 2 1/2”

Grooved Ends

NIBCOActuated Ball Valves

c/w Pneumatic or Electric ActuatorValve Positioners, Solenoid Valves Limit Switch and Indicators, NEMA

4, 7 & 9 Enclosures

NCI Two Piece Brass Ball Valve

FP600 Packed Design600 CWP, Size 1/4” - 2”

400 CWP, Size 2 1/2”- 4”Threaded or Solder Ends

NCI Two Piece Brass Ball Valve

FP601 Double ‘O’ Ring Design600 CWP, Size 1/4” - 2”

400 CWP, Size 2 1/2”- 4”Threaded or Solder Ends

FUSION413 One Piece Ball Valve

Class 800 (2000WOG)Carbon Steel Bar Stock BodySize 1/4” - 2”, Threaded Ends

NACE MR-01-75, B16.34

FORTUNE320 Two Piece Ball Valve

1000WOG, Stainless Steel Body Size 1/4” - 3”, Threaded Ends

MSS MP-110

FUSION322 Two Piece Ball Valve

Class 800 (2000WOG) CS. or SS. Body

1/4”-2”, Threaded or S.W. Ends API 607, NACE MR-01-75, B16.34

FUSION332 Three Piece Ball Valve

Class 800 (2000WOG) CS. or SS. Body

1/4”-2”, Threaded or S.W. Ends, API 607, NACE MR-01-75, B16.34

FUSION334 Three Piece Ball Valve3000WOG, CS. or SS. Body,

1/4” - 3”, Threaded, S.W. or Flanged Ends, API 607, NACE MR-01-75

B16.34

FUSION311 One Piece Ball ValveClass 150 and Class 300

Carbon Steel / Stainless Steel Body 3/4” - 8”, Flanged Connection

API 607, NACE MR-01-75

FUSION324 Two Piece Ball Valve

Class 150 to Class 600Carbon Steel / Stainless Steel Body

1/2” - 6”, Flanged Connection API 607, NACE MR-01-75

FORTUNE415 / 315 One Piece Ball Valve

2000 WOG, Carbon Steel / Stainless Steel Body 1/4” - 2”, Threaded

Ends, CRN, API 598, 607, ASME B1.20.1, CSA Z245.15, MSS SP-110

FORTUNE428 / 328 Two Piece Ball Valve

2000 WOG, Carbon Steel / Stainless Steel Body, 1/4” - 3”, Threaded Ends, CRN, MSS SP110, ASME B1.20.1, CSA Z245.15, API 598

FORTUNE436 / 336 Three Piece Ball Valve

1500 WOG, Carbon Steel / Stainless Steel Body, 1/4” - 3”, THD, SW. or

BW. Ends, CRN, MSS SP110, ASME B1.20.1, CSA Z245.15, API 598

FUSION317 Isolation Ball Valve

6000 WOG, WCB / LCC Body 3/4” - 2”, FNPT x MNPT Ends, ASME

B16.34, API 607, NACE MR-01-75

FUSION432 Trunnion Ball Valve

Class 150 - 1500, LF2 Body2” - 16”, Flanged Connection

CSA Z235.15, API 607 NACE MR-01-75

Ball Valves


2


Gate Valves

NIBCO T/S-111 (T/S-113)

Rising (Non Rising)Stem Gate ValveClass 125 BRZ Body, Screwed-In

Bonnet, Solid Wedge, Size 1/4” - 3” Threaded or Solder Ends

NIBCO T-131 (T-133)

Rising (Non Rising)Stem Gate ValveClass 150 BRZ Body

Screwed-In Bonnet, Solid Wedge Size 1/4” - 3”, Threaded Ends

NIBCO T/S-134 Rising Stem Gate Valve

Class 150 BRZ Body, Union Bonnet Solid Wedge, Integral Seat

Size 1/4” - 3”, Threaded or Solder MSS SP-80

NIBCO T/S-136 N.R. Stem Gate Valve

Class 150 BRZ Body, Union Bonnet Solid or Split Wedge, Integral SeatSize 1/4” - 3”, Threaded or Solder

MSS SP-80

NIBCO T-154A Rising Stem Gate Valve

Class 200 BRZ Body, Union Bonnet Solid Alloy Wedge, Integral Seat

Size 1/4” - 2”, Threaded EndsMSS SP-80

NIBCO T-174-SS/A Rising Stem Gate ValveBZ Body, Union Bonnet Solid Bronze

or Alloy Wedge Bronze Integral or SS Seat, Size 1/4”

- 2”, Threaded Ends, MSS SP-80

NIBCO T-176-SS/A N.R. Stem Gate Valve

BZ Body, Union Bonnet, Solid Bronze or Alloy Wedge

Bronze Integral or SS Seat, Size 1/4” - 2”, Threaded Ends, MSS SP-80

NIBCO F-617-O/ON (T-617-O/ON) Gate V.

Class 125 Cast Iron Body, OS & Y Bolted Bonnet, Bronze Trim, All Iron Trim, 2”-12” Flg. & Thd. 14”-24” Flg.

Connection, MSS SP-70

NIBCO F/T-619/N/SON Gate Valve

Class 125 Cast Iron Body, N.R.S. HW or SON, Bolted Bonnet, Bronze Trim All Iron Trim, 2”-12” Thd. 2”-16” Flg.

Connection, MSS SP-70

NIBCO F-667-O Gate Valve

Class 250 Cast Iron Body, OS & Y, Bolted Bonnet, Solid Wedge

Mounted Seat, Flanged ConnectionSize 2”-12”, MSS SP-70, NYC B.S.A.

NIBCO F-669 Gate Valve

Class 250 Cast Iron Body, N.R.S Bolted Bonnet, Solid Wedge Mounted Seat, Size 2”-12”

Flanged Connection, MSS SP-70

NIBCO F-637-31/33 Gate Valve

Class 150 Ductile Iron Body, OS&Y Bolted Bonnet, Bronze/SS Mounted

Trim, Solid Wedge, Size 2” - 24” RF. Flanged Connection, MSS SP-70

NIBCO F-639-31/33 Gate Valve

Class 150 Ductile Iron Body, N.R.S., Bolted Bonnet, Bronze/SS Mounted

Trim, Solid Wedge, Size 2” - 16” RF. Flanged Connection, MSS SP-70

FORTUNE 751-F/B (754-F/B) Gate Valve

Class 150 (300) WCB Body, OS & Y Bolted Bonnet, CR13 Wedge, Stel-

lite HF Seat, 2”-24” Flanged or B.W. Connection, ANSI B16.10, API 600

FORTUNE 851-TF/SW Forged Steel Gate Valve

Class 800 A105 Body, Rising Stem Half Stellite Trim, 1/2”-2”, Threaded

or S.W. Ends, Optional F5, F11, F304, F316 Body & Bonnet, API 602

FORTUNE 350-TF/SW Gate Valve

200 WOG SS. Body, None Rising Stem Screwed Bonnet, 1/2”-3”

Threaded or S.W. Ends

3

Gobe &

Angle Valves


NIBCO T/S-211 B/Y Globe Valve

Class 125 BRZ Body, Screwed-In Bonnet, Bronze or TFE Disc

1/8” - 3”, Threaded or Solder Ends MSS SP-80

NIBCO T/S-235Y Globe Valve

Class 150 BRZ Body, Union Bonnet TFE Disc, Integral Seat

1/8” - 3”, Threaded or Solder EndsMSS SP-80

NIBCO T-275-B/Y Globe Valve

BRZ Body, Union Bonnet BRZ or TFE Disc & Bronze Seat

1/8” - 3”, Threaded or Solder Ends MSS SP-80

NIBCO T-275-AP Globe Valve

BRZ Body, Union BonnetStainless Steel Disc & Seat

1/4”-3”, Threaded or Solder EndsMSS SP-80

NIBCO T/S-311 Angle Valve

Class 125 BRZ Body, Screwed-In Bonnet, TFE Disc, Integral Seat

1/4” - 3”, Threaded EndsMSS SP-80

NIBCO T/S-335Y Angle Valve

Class 150 BRZ Body, Union Bonnet TFE Disc, Integral Seat

1/8” - 3”, Threaded EndsMSS SP-80

NIBCO F-718-B/N Globe Valve

Class 125 C.I. Body, Bolted Bonnet Bronze or C.I. Disc, Bronze Seat

Size 2”- 10”, Flanged Connection MSS SP-85

NIBCO F-768-B Globe Valve

Class 250 C.I. Body, Bolted Bonnet Bronze Disc, Bronze Mounted Seat

Size 2”- 8”, Flanged ConnectionMSS SP-85

NIBCO F-738-31 Globe Valve

Class 150 D.I. Body, Bolted Bonnet Bronze Disc, Bronze Mounted Trim

2” - 10”, RF. Flanged ConnectionMSS SP-85

NIBCO F-818-B C.I. Angle Valve,

Class 125 D.I. Body, Bolted Bonnet Bronze Disc, Bronze Mounted Seat

Size 2”- 8”, Flanged ConnectionMSS SP-85

NIBCO F-838-31 D.I. Angle Valve

Class 150 D.I. Body, Bolted Bonnet Bronze Disc, Bronze Mounted Seat

Size 2”- 8”, Flanged Connection MSS SP-85

NIBCO F-869-B Angle Stop Check Valve

Class 250 C.I. Body, Bolted Bonnet Bronze Disc, Bronze Mounted Trim

2 1/2” - 8”, Flanged ConnectionMSS SP-85

FORTUNE 761-F/B Globe Valve

Class 150 WCB Body, OS & Y, Bolted Bonnet, CR13 Disc, Stellite HF Seat 2”-24” Flanged / B.W. Connection

ANSI B16.5, B16.10, API 600

FORTUNE 764-F/B Globe Valve

Class 300 WCB Body, OS & Y, Bolted Bonnet, CR13 Disc, Stellite HF Seat 2”-24” Flanged / B.W. Connection

ANSI B16.10, API 600

FORTUNE 861-TF/SW Forged Steel Globe Valve

Class 800 A105 Body, Rising Stem, Half Stellite Trim, 1/2”-2”, Threaded or S.W. Ends, Optional F5, F11, F304,

F316 Body & Bonnet, API 602

FORTUNE 360-TF/SW Globe Valve

200 WOG, 150 SWP SS. Body, Non Rising Stem Screwed Bonnet, 1/2”-

2” Threaded or S.W. ConnectionAPI 603

4

Check Valves


NIBCO T/S-413-B/Y/W/V Swing Check

Class 125 Bronze Body TFE, Buna-N or Viton Disc


NIBCO T/S-433-B/Y (S-433-B) Swing Check

Class 150 Bronze BodyBronze or TFE Disc, 1/2” - 3” (4”)

Threaded or Solder EndsMSS SP-80

NIBCO T/S-473-B/Y Swing Check

Bronze BodyBronze or TFE Disc


NIBCO T/S-480-Y Lift Check Valve

Class 125 Bronze Body Buna-N or TFE Disc

3/8” - 2”, Threaded or Solder Ends

NIBCO F/T-918-B/N Swing Check

Class 125 C.I. Body, Bronze or C.I. Disc, Bronze or C.I. Mounted Seat Flanged 2”- 12”, Threaded 2” - 6”

MSS SP-71

NIBCO F-938-31/33 Swing Check

Class 150 D.I. Body, Bronze Disc & Bronze/SS Mounted Trim

2” - 12”, R.F. Flanged Connection MSS SP-71

NIBCO F-968-B Check ValveClass 250 C.I. Body

Bronze Disc and Seat 2 1/2” - 6”, Flanged Connection

MSS SP-71

NIBCO F(W)-910 / F(W)-960 Silent Check

Class 125/150 C.I. Body, Bronze Disc Buna-N Bonded to Bronze

Seat, Flanged 2 1/2” - 36” (Wafer 2”-6”), MSS SP-71

NIBCO G/W-920-W Twin Disc Silent Check

2”-24” Wafer 200 PSI CWP 2” -12” Grooved 250 PSI CWP

Cast Iron BodyBronze Disc, Buna-N Seat

FORTUNE 771-F/B Check Valve

Class 150 WCB Body, OS & Y, Bolted Bonnet, CR13 Disc, Stellite HF Seat 2”-12” Flanged or B.W. Connection


FORTUNE 774-F/B Check Valve

Class 300 WCB Body, OS & Y, Bolted Bonnet, CR13 Disc, Stellite HF Seat 2”-12” Flanged or B.W. Connection


FORTUNE 871-TF/SW Forged Steel Lift CheckClass 800 A105 Body, Rising Stem,

Half Stellite Trim, 1/2”-2”, Threaded or S.W. Ends, Optional F5, F11,

F304, F316 Body & Bonnet, API 602

FORTUNE 876-TS/SW Forged Steel Swing Check

Class 800 A105 Body, Rising Stem Half Stellite Trim, 1/2”-2”, Threaded or S.W. Ends, Optional F5, F11, F304

F316 Body & Bonnet, API 602

FORTUNE 370-TF/SW Swing Check

200 WOG, 150 SWP, SS. Body Screwed Bonnet

1/2”-3” Threaded or S.W. Ends API 603

5

Butterfly Valves

NIBCOWD2000 Butterfly Valve200 PSI Ductile Iron Body

Molded-in Liner, Alum. Brz. Disc Size 2”- 12”, Wafer Style

NIBCOLD2000 Butterfly Valve

200 PSI Ductile Iron BodyMolded-in Liner, Alum. Brz. Disc

Size 2”- 12”, Lug Style

NIBCOWD3000 Butterfly Valve

250 PSI, Ductile Iron BodyMolded-in Liner

D.I., S.S. or Alum. Brz. Disc Size 2”- 12”, Wafer Style


250 PSI, Ductile Iron Body Molded-in Liner

D.I., S.S. or Alum. Brz. Disc Size 2”- 12”, Lug Style

NIBCOWD5022 / LD5022 Butterfly Valve285 PSI Ductile Iron Body, Molded-

in Liner, Stainless Steel DiscSize 2”- 12”, Wafer / Lug Style


150 PSI, Ductile Iron BodyMolded-in Liner

D.I., S.S. or Aluminum Bronze DiscSize 14”- 48”, Lug Style


200 PSI, Ductile Iron Body Molded-in Liner

D.I., S.S. or Aluminum Bronze DiscSize 14”- 24”, Lug Style

NIBCOWC2000 Butterfly Valve200 PSI, Cast Iron Body

Molded-in LinerAluminum Bronze Disc

Size 2”- 12”, Wafer Style

NIBCOLC2000 Butterfly Valve200 PSI, Cast Iron Body

Molded-in LinerAluminum Bronze Disc Size 2”- 12”, Lug Style

NIBCON200 Butterfly Valve

200 PSI, Cast Iron BodyAluminum Bronze Disc

Size 2”- 12”, Wafer Style

NIBCON200 Butterfly Valve

200 PSI, Cast Iron Body Aluminum Bronze DiscSize 2”- 12”, Lug Style

NIBCOGD4765/4775 Butterfly Valve

300 PSI, Polyamid Coated DI. Body Elastomer Coated Disc

Size 2”- 12”, Grooved Ends

NIBCOFC2000 Butterfly Valve

200PSI, Polyamid Coated C.I. Body, Elastomer Coated Disc

Size 2”- 12”, Flanged Connection

NIBCOFD5000 Butterfly Valve

285PSI, Polyamid Coated D.I. BodyElastomer Coated Disc

Size 2”- 12”, Flanged Connection

NIBCOLCS6822 / LCS7822 H.P. BFV.

Class 150/300 C.S. BodyS.S. Disc & Stem, PTFE Seat & Seal Dual Offset Design, Dead end Ser-

vice, Size 21/2”- 24”, Lug Style


6



7


KT-580-70-UL175 CWP, BRZ Body

Size 1 1/4”-3”, Threaded Ends UL Listed • FM Approved


KT-585-70-UL 175 CWP, BRZ Body

Size 1/4”- 1”, Threaded EndsUL Listed • FM Approved

NIBCO KT-505-W-8 / KG-505-W-8 Brz. BV.

300 PSI WWP, BRZ Body, With Indicating Gear Operator

1”-2 1/2”, Threaded / Grooved EndsUL Listed • FM Approved

NIBCO T-104-O Bronze Gate Valve

175 PSI WWP, BRZ Body Outside Screwed and York 1/2” - 2”, Threaded Ends

UL/ULC Listed • FM Approved

NIBCO T-103-HC Bronze Hose Gate Valve175 PSI WWP, BRZ Body, Screw-in Bonnet, NRS., with Cap & Chain

Size 2 1/2”, Threaded EndsUL Listed • FM Approved

NIBCO F-607-OTS Gate Valve

175 PSI WWP, Cast Iron Body, RS. OS & Y, Solid Wedge, 2 1/2”-12”

Flg. Connection, MSS SP-70UL/ULC Listed • FM Approved

NIBCO F-607-RW Gate Valve

250 PSI WWP, D.I. Body, RS. OS & Y, Solid Resilient Wedge, 2 1/2”-12”

Flg. Connection, MSS SP-70UL/ULC Listed • FM Approved

NIBCO F-609 / M-609 Gate Valve

175 PSI WWP, C.I. Body, Solid Wedge, Indicator Post Stem, 4”-12” Flanged / Mechanical Connection


NIBCO F-609-RW / M-609-RW Gate Valve250 PSI WWP, D.I. Body, Resilient

Wedge, Indicator Post Stem, 4”-12”Flanged / Mechanical Connection


NIBCO FM-609-RW Gate Valve

250 PSI WWP, D.I. Body, Resilient Wedge, Indicator Post Stem, 4”-12”Flanged x Mechanical Connection


NIBCO F-697-O Gate Valve

350 WWP UL / 300 WWP FM C.I. Body, OS & Y, Solid Wedge

2 1/2”-10” Flg. ConnectionUL Listed • FM Approved

NIBCO KT-65-UL Bronze Globe Valve

175 PSI WWP, BRZ Body, Screwed Over Bonnet, Rubber Disc

Size 1/4” - 1” Threaded EndsUL Listed

NIBCO KT-211-W-UL Bronze Globe Valve175 PSI WWP, BRZ Body, Screwed

Over Bonnet, Rubber Disc Size 1 1/4” - 3”, Threaded Ends

UL Listed

NIBCO KT-67-UL Bronze Angle Valve


Size 1/2” - 1”, Threaded EndsUL Listed

NIBCO T-301-W Bronze Angle Valve


Size 1 1/4” - 3”, Threaded EndsUL/ULC Listed

NIBCO KT-291-W3 Brz Side Outlet Globe

3-way Valve400 PSI WWP, Screwed Over Bon-

net, Rubber Disc Size 1/4”, Threaded Ends



8

NIBCOWD3510-4/8 Butterfly Valve

250 PSI D.I. Body & Disc Gear Operator w/ Flag Indicator

Size 2”- 12”, Wafer StyleUL/ULC Listed • FM Approved

NIBCOGrooved End Butterfly Valve

GD4765-4N/8N 300 WWP, 2-1/2” - 8” GD1765-8N, 175 WWP, 10” Polyamid Coated DI. Body,

Elastomer Coated DiscGear Operator with Flag Indicator


NIBCOLD3510-4/8 Butterfly Valve

250 PSI D.I. Body & DiscGear Operator with Flag Indicator

Size 2”- 12”, Lug StyleUL/ULC Listed • FM Approved

NIBCOGD6765-8N Butterfly Valve

350 PSI WWP, Polyamid Coated DI. Body, Elastomer Coated Disc

Gear Operator with Flag IndicatorSize 21/2”-10”, Grooved EndsUL/ULC Listed • FM Approved

NIBCO KT-403-W Bronze Check Valve

200 PSI WWP, BRZ BodyHorizontal Swing Rubber DiscSize 1/2” - 3”, Threaded Ends

NIBCO T-480 Bronze Lift Check Valve

250 PSI WWP, BRZ Body Spring Actuated in line Lift

Buna-N DiscSize 3/8” - 2”, Threaded Ends

NIBCO F-908-W Swing Check Valve

175 PSI WWP, C.I.Body, Rubber DiscSize 21/2” -12”, Flanged Connection


NIBCO KW-900-W Check Valve

250 PSI WWP, C.S. Body, Double Door Design, Nitrile Rubber Seat

Size 21/2” -16”, Wafer ConnectionUL/ULC Listed • FM Approved

NIBCO KG-900-W 350 Silent Check

350 PSI WWP, C.I. Body, Nitrile Rubber Seat, Size 11/2”, 3”, 4”, 6”, 8” and 10”, Grooved ConnectionUL/ULC Listed • FM Approved

NIBCO KG-900-W Twin Disc Silent Check

250 PSI WWP, C.S. BodyNitrile Rubber Seat

Size 21/2” -12” Grooved ConnectionUL/ULC Listed • FM Approved

NIBCO G-917-W Swing Check Valve

250 PSI WWP, C.I. Body, Brz SeatSS. Disc, EPDM Seal

21/2” -6”, Grooved ConnectionUL/ULC Listed • FM Approved

NIBCO NIP-2AJ Wall Indicator Post

Gate Valve Indicator PostUL/ULC Listed • FM Approved

NIBCO NIP-1AJ Upright Indicator Post

Gate Valve Indicator PostUL/ULC Listed • FM Approved

NIBCOGD4765-C-8N Butterfly Valve

300 PSI WWP, Polyamid Coated DI. Body, Elastomer Coated Disc

Normally Closed PositionGear Operator with Flag IndicatorSwitch, 21/2”-8”, Grooved EndsUL/ULC Listed • FM Approved

NIBCOLD3510-C-8 Butterfly ValveD.I. Body & Disc 250 WWP,Normally Closed Position

Gear Operator with Flag IndicatorSize 21/2”- 8”, Lug Style


NIBCOWD3510-C-8 Butterfly ValveD.I. Body & Disc 250 WWP,Normally Closed Position

Gear Operator with Flag IndicatorSize 21/2”- 8”, Wafer Style


Associations, Institutes and Approval BodiesANSI......

ASME....

API........

ASTM....

AWWA...

CSA.......

FM.........

MSS.......

NACE....

NFPA

NSF

UL..........

ULC.......

UPC.......

American National Standards Institute

American Society of Mechanical Engineering

American Petroleum Institute

American Society for Testing Material

American Water Works Association

Canadian Standard Association

Factory Mutual Fire Insurance Companies

Manufacturers Standardization Society of the Valve and

Fittings Industry

The National Association of Corrosion Engineers

National Fire Protection Association

NSF/ANSI 61 Standard 61 for Portable Water Service

Underwriters’ Laboratories Inc.

Underwriters’ Laboratories of Canada

IAPMO R&T CertificationPressure and Temperature Rating

ASTM B62 & B61 Bronze Alloy

Temperature(°F)

Pressure Class by Material & End StyleASTM B62 ASTM B61

1252,3 1503 2003 3003

Thread Thread Thread Thread-20 to 100 200 300 400 600

200 185 270 375 560250 170 240 350 525300 155 210 325 490350 140 180 300 450400 -- -- 275 410406 1251 1501 -- --450 120 145 250 375500 -- -- 225 340550 -- -- 200 300

Table from MSS SP-801. Some Codes (i.e. ASME BPVC, Section 1) limit the rating temperature of indicated material to 406°F2. Buna-N disc valves limited to 180°F temperature3. PTFE disc valves limited to 450°F temperature4. The Pressure & temperature ratings of Solder end valves vary with the solder & the size

A105 (A216 WCB Carbon Steel)

Temperature(°F)

Working Pressure in PSIG by Class150 300 600 900 1500 2500

-20 to 100 285 740 1480 2220 3705 6170200 260 675 1350 2025 3375 5625300 230 655 1315 1970 3280 5470400 200 635 1270 1900 3170 5280500 170 600 1200 1795 2995 4990600 140 550 1095 1640 2735 4560650 125 535 1075 1610 2685 4475700 110 535 1065 1600 2665 4440750 95 505 1010 1510 2520 4200800 80 410 825 1235 2060 3430850 65 270 535 805 1340 2230900 50 170 345 515 860 1430950 35 105 205 310 515 8601000 20 50 105 155 260 430

Table from ANSI B16.34

Note:Neither NCI or its affiliated entities assumes responsibility for the selection, use and maintenance of any product. Responsibility for the selection, use, and maintenance of any listed product remains with the purchaser and end-user.

A182 - F316 (A351 CF8M & CF3M Stainless Steel)

Temperature(°F)

Working Pressure in PSIG by Class150 300 600 900 1500 2500

-20 to 100 275 742 1440 2160 3600 6000200 240 620 1240 1860 3095 5160300 215 560 1120 1680 2795 4666400 195 515 1030 1540 2570 4280500 170 480 955 1435 2390 3980600 140 450 905 1355 2255 3760650 125 445 890 1330 2220 3700700 110 430 865 1295 2160 3600750 95 425 845 1270 2110 3520800 80 415 830 1245 2075 3460850 65 405 810 1215 2030 3320900 50 395 790 1180 1970 3280950 35 385 775 1160 1930 32201000 20 365 720 1090 1820 3030

Table from ANSI B16.34

Cast Iron & Ductile Iron

Temperature1

(°F)

Pressure Class by Material & Valve SizeCast Iron Ductile Iron

Class 125 Class 250 Class 150

2”-12” 14”-24” 30”-48” 2”-12” 14”-24” 2”-12”-20 to 100 200 150 150 500 300 285

150 200 150 -- 500 300 243200 190 135 115 460 280 235225 180 130 100 440 270 --250 175 125 85 415 260 225275 170 120 65 395 250 --300 165 110 50 375 240 215325 155 105 355 230 --350 150 100 335 220 210375 145 315 210 --400 140 290 200 200425 130 270 --450* 125 250 185500 170550 155600 140650 125

The temperature shown for the corresponding rating shall be the material temperature of the pressure rating parts. It shall be assumed that the metal temperature will be the temperature of the contained fluid. Use of a pressure rating at a metal temperature other than that of the contained fluid shall be the responsibility of the user.1. Buna-N disc vales limited to 180 °F or PTFE disc valves limited to 450°F; * Maximum temperature for bronze trim or PTFE

Abbreviations and TermsBLV: Ball Valve

BFV: Butterfly Valve

BRZ.: Bronze

B.W.: Butt-weld

C.I. Cast Iron (Gray Iron)

COP.: Copper

CS.: Carbon Steel

CWP: Cold Working Pressure

D.I.: Ductile Iron

°F: Degree Fahrenheit

FF. FLG.: Flat Face Flange

NRS: Non-Rising Stem

OD: Outside Diameter

OS&Y: Outside Screw and York

PSI: Pounds Per Square Inch

RF. FLG.: Raised Face Flange

SB: Screw-in Bonnet

SPEC: Specification

SS.: Stainless Steel

STD: Standard

S.W. Socket-weld

SWP: Steam Working Pressure

Temp: Temperature

Thrd: Threaded

UB: Union Bonnet

WOG: Water-Oil-Gas Service

WWP: Water Working Pressure


www.ncicanada.com

WESTERN WAREHOUSE19335-96TH AvenueSurrey, BC V4N 4C4

Phone : 604.513.43071.800.268.3509

Fax: 604.882.9901

HEAD OFFICE & WAREHOUSE66 Don Hillock Drive

Aurora, ON L4G 0H6Phone: 905.727.5545

1.800.268.3509Fax: 905.727.4088

THERMOPLASTIC (CHEMTROL PVF)• PVC Sch80 Valves & Fittings• CPVC Sch80 Fittings• PP Sch80 (Black & Natural) PVF• PVDF Sch80 (Red & Natural) PVF

GROOVED FITTINGS• Flexible & Rigid Couplings• Reducing Couplings• Hinged Flange Adapters• Standard Radius Fittings & Flange Adapters• Short Radius 90s & Tees• Standard Radius 90s & Tees• Mechanical Tees• U-Bolt Strap Tees• Concentric Reducers

OTHER QUALITY PRODUCTS BY NCI CANADAMETAL FITTINGS• Copper Fittings• Copper Press System Fittings & Valves• Threaded Bronze Fittings• Brass Nipples• Black & Iron Fittings 150# • Black Malleable Iron Fittings 300# • Forged Steel Fittings & Outlets - Class 3000• H.P. Sch 40/80/XXH Seamless Steel Nipples

PLASTIC FITTINGS• ABS-DWV Fittings• CPVC-CTS FGG (FLOWGUARD GOLD) PVF• PVC Sch40 White Fittings & Valves

BACKFLOW PREVENTER• Double Check Backflow Preventer • Reduced Pressure Zone Backflow Preventer• Water Pressure Reducing Valves & Y Strainers• Automatic Control Valves

INSULATION• Pipe Insulation (Ontario, Québec, Atlantic)

PLUMBING VALVES• Boiler Drain Valves• Stop and Waste ValvesPUSH TO FIT FITTINGS & VALVES

• Choice of polysulfone, copper or brass• Fittings, Valves, Fittings for Hot Water Heaters and Tools• Lead-free, NSF/ANSI 61-G standard

MONTREAL WAREHOUSE1405 boul. Hymus

Dorval, QC H9P 1J5Phone : 905.727.5545

1.800.268.3509Fax: 905.727.4088

COMMERCIAL, INDUSTRIAL & FIRE PROTECTION METAL VALVES

Documents

Transcript of COMMERCIAL, INDUSTRIAL & FIRE PROTECTION METAL VALVES