OpenGL NVIDIA Command-List: Approaching Zero Driver Overhead
Command List
1
© 19922014 Cisco Systems, Inc. All rights reserved. Command List The table describes the commands that are used in this activity. The commands are listed in alphabetical order so that you can easily locate the information that you need. Refer to this list if you need configuration command assistance during the lab activity. Command Description configure terminal Enters global configuration mode. interface interface Enters interface configuration mode. show interfaces interface Displays the interface status and statistics. show interfaces interface switchport Displays the switch port status of an interface. show vlan Displays VLAN database. switchport mode trunk Statically configures an interface for trunking. vlan vlan_id Creates a VLAN.
-
Upload
julio-armando-vilar-valdes -
Category
Documents
-
view
228 -
download
0
description
Command List
Transcript of Command List
-
13/6/2015 CommandList
https://cll1.cisco.com/content/xtrac/2 1/1
19922014CiscoSystems,Inc.Allrightsreserved.
CommandList
Thetabledescribesthecommandsthatareusedinthisactivity.Thecommandsarelistedinalphabeticalordersothatyoucaneasilylocatetheinformationthatyouneed.Refertothislistifyouneedconfigurationcommandassistanceduringthelabactivity.
Command Descriptionconfigureterminal Entersglobalconfigurationmode.interfaceinterface Entersinterfaceconfigurationmode.showinterfacesinterface Displaystheinterfacestatusandstatistics.showinterfacesinterfaceswitchport
Displaystheswitchportstatusofaninterface.
showvlan DisplaysVLANdatabase.switchportmodetrunk Staticallyconfiguresaninterfacefor
trunking.vlanvlan_id CreatesaVLAN.
