Oss commands1. To see the TG of particular cellrxtcp:moty=rxotg,cell=(cell name);2. To see the cf with faultsrxmfp:mo=rxocf-(tgno.);3. To see the tgrxcdp:mo=rxotg-(tgno.);4. To see the all tru statusrxmfp:mo=rxotrx-(tgno.)-(trutei);5. To see the cfrxmsp:mo=rxocf-(tgno);6. To see all the devicesrxapp:mo=rxotg-(tgno);7. To see alarmrxasp:mo=rxocf-(tgno.);8. To see all cf of BSCrlcrp:cell=all;9. To see all data of Cellrlcrp:cell=(cellname);10. To see the the software version and cabinet type,BTS-tie valuerxmop:mo=rxocf-(tgno);11. To see external alarm for level 1allip:acl=a1;for level 2allip:acl=a2;12. to BLOCK the CFrxbli:mo=rxocf-(tgno),subord,force;the trxrxbli:mo=rxotrx-(tgno)-(trutei),subord, force;the txrxbli:mo=rxotx-(tgno)-truei),force;the tf rxbli:mo=rxotf-(tgno),force; 13. To Deblock the CFrxble:mo=rxocf-(tgno),subord; the trxrxble:mo=rxotrx-(tgno)-(trutei)subord;the txrxble:mo=rxotx-(tgno)-(trutei);the tf rxble:mo=rxotf-(tgno); 14. To get the Dip namerxapp:mo=rxotg-(tgno); radep:dev=(device of cf); ntcop:snt=(etmno);15. To see the Dipdtstp:dip=(dipname);16. To see quality of dipdtqup:dip=(dipname);17. To reset the dipdtqsr:dip=(dipname),sf,degr,unacc;18. To see all halted cell in bscrlcrp:cell=all,state=halt;19. To out of service cf rxese:mo=rxocf-(tgno),subord; trx rxese:mo=rxotrx-(tgno)-(trutei),subord; tx rxese:mo=rxotx-(tgno)-(trutei); tf rxese:mo=rxotf-(tgno); 20. To in service cf rxesi:mo=rxocf-(tgno),subord; trx rxesi:mo=rxotrx-(tgno)-(trutei),subord; tx rxesi:mo=rxotx-(tgno)-(trutei); tf rxesi:mo=rxotf-(tgno); 21. Some Tip