Colorbond steel fencingeastendsteel.com.au/uploads/2/3/9/5/23950960/... · Colorbond® Fencing is a...
Transcript of Colorbond steel fencingeastendsteel.com.au/uploads/2/3/9/5/23950960/... · Colorbond® Fencing is a...
1300 336 237 oxworks.com.au
Colorbond® steel fencing
ToolsRequired
Colorbond® Fencing is a stylish and durable boundary fence with 16 colour options to match your home. Unlike Timber Paling Fences, it looks the same from both sides, so both you and your neighbour will be happy with the end result.
Colorbond® Fencing won’t rot, warp or twist, and doesn’t need painting…ever.
Our Colorbond® Fencing is easy to install, comes with a 10 year warranty for your peace of mind, and will add privacy & security to your home. Oxworks manufacture our ColourSmart and Breezeway Colorbond Fencing in Australia from genuine Colorbond® Steel.
• Boundary Fencing
• Side-of-House Security
• Creates great privacy
• Pool Fencing
Coloursmart can be used as pool fencing but MUST be installed in conjunction with all other pool regulations to comply with Aust. Stds AS1926.1
• Bin Enclosures
• Lockable Storage
• Contact your local Govt. Authority before deciding on your fencing requirements
• Check for all underground services at Dial-Before-You-Dig! Simply Dial 1100 to find out more.
• Allow at least 24 hours to ensure your frame (posts & rails) are fully set in concrete before installing your In Fill sheets and gates
• Posts and panels can be easily cut down with nibbler or tin snips to fit non standard spacings
• Remove all metal filings and concrete splatter after installation to avoid damaging your new fence
These colour swatches are meant as a guide only
Red Oak®Eclipse®
Posts & Rails OnlyEstate® Bluestone® Evergreen® Willow® Meadow®Hedge®
Domain®Harvest®Terrace®Riversand®Teatree®Frost® Grey Ridge® Summershade®
• Panel Widths:2400mm; 3180mm
• Gate Widths:930mm; 1720mm
• Panel/Gate Heights:1200mm, 1500mm1800mm, 2100mm
• Post/Rail:0.8mm Base Metal Thickness (BMT)
• Infill Sheet: 0.34mm Base Metal Thickness (BMT)
• Tape Measure
• Stringline
• Shovel/Post Hole Shovel
• Cordless Battery Drill
• Hex Head Drill Bit (5/16)
• Spirit Level
• Tin Snips or Nibbler
These are used to trim down in fill sheets
• Concrete Mix
Unique Coloursmart ZigZag Profile
Coloursmart Post & Rail Profiles
PanelDetails
SuitableUsage
HandyHints
Coloursmart Colorbond Fencing
1300 336 237
Available Colours
1 Site Plan & Ordering 2 String Line
& Post Holes 3 Install Posts 4 In Fill
Sheets 5 Install Gate(s)
• Decide on fence position and measurements of panels & posts by creating a mud map of your site.
• Following the above Materials Checklist, calculate how many of each component you require
• Contact any one of our stores to complete your order. Most items are available in stock
• Set Stringline along the desired line of the fence
• Measure out all holes, starting with the gate post holes
• Dig post holes along stringline 600mm deep x 250mm in diameter
• Posts will sit approximately 500mm into the post holes
• Ensure post centres are accurate - see below diagram
• Screw posts back to back, place them in post holes and concrete them in, ensuring they are level and flush along the stringline
• 50 x 50 steel posts should be used for gates and corners
• Channel posts can be screwed on to these corner/gate posts
• Insert the bottom rail into the post channels and screw through each side of the post channel to secure it along the bottom level of your fenceline
• Place sheets into the channel posts and bottom rail ensuring they overlap evenly and lock in to place
• Place the top rail over the top of sheets and screw through each side of the channel post to secure
• Gates assembly:See below diagram
• Attach hinge & latch components of the Gate Kit to Gate as per instructions
• Attach hinge & latch components of the Gate Kit to the 50 x 50 Steel Gate Posts as per instructions
Materials Checklist
C
D
B
Panel FramePosts & Rails
A
GateC
Gate KitD
Panel SheetB
i l lus t rat ion only
250mm
600mm
ColoursmartPanel Span
TaperedConcrete
Standard PedestrianGate Span
2400mmChannel Post Centres
1005mm50 x 50 steel
gate post Centres
Channel Posts Screwedto 50 x 50 gate posts
2 x Channel PostsScrewed together
back to back
d.i.y. guide
Care Instructions & Warranty:Exposure to UV Light, pollution, salt deposits and chemicals can affect the long term performance of the fencing coating if not removed with regular washing.
A gentle monthly clean with a soft brush, warm water and mild detergent followed by a rinse of fresh water will maintain the finish of both powdercoated, Colorbond and stainless steel fencing components and fulfill warranty conditions.
YearWarranty
Conditions Apply
Disclaimer: Drawings not to scale. While all care is taken in the production of this DIY (do it yourself) guide it is provided as an indicative installation guide only. Oxworks Pty Ltd is not liable or responsible for the outcome of any fence installed using this guide. © Copyright 2014 Oxworks Pty Ltd. All rights are reserved in relation to this matter.
oxworks.com.au
A
Gate Setup
bottom rail
iN Fill SHEEt
gatE StilE gatE StilE
toP rail
1300 336 237 oxworks.com.au
colorbond Fencing
Code Complete Coloursmart Panels & Gates
CONFIG Coloursmart Colorbond Panel 2400 x 1200
CONFIG Coloursmart Colorbond Panel 2400 x 1500
CONFIG Coloursmart Colorbond Panel 2400 x 1800
CONFIG Coloursmart Colorbond Panel 2400 x 2100
Panel includes 3 x Infill sheets: 2 x Channel Posts: 2 x Rails: 12 x Tek Screws
CONFIG Coloursmart Colorbond Panel 3180 x 1200
CONFIG Coloursmart Colorbond Panel 3180 x 1500
CONFIG Coloursmart Colorbond Panel 3180 x 1800
CONFIG Coloursmart Colorbond Panel 3180 x 2100
Panel includes 4 x Infill sheets: 2 x Channel Posts: 2 x Rails: 12 x Tek Screws
CONFIG Coloursmart Colorbond Gate 930 x 1200
CONFIG Coloursmart Colorbond Gate 930 x 1500
CONFIG Coloursmart Colorbond Gate 930 x 1800
CONFIG Coloursmart Colorbond Gate 930 x 2100
Gate includes 2 x Gate Stiles: 1 x Infill sheets: 2 x Rails: 18 x Tek Screws
CONFIG Coloursmart Colorbond Gate 1720 x 1200
CONFIG Coloursmart Colorbond Gate 1720 x 1500
CONFIG Coloursmart Colorbond Gate 1720 x 1800
CONFIG Coloursmart Colorbond Gate 1720 x 2100
Gate includes 2 x Gate Stiles: 2 x Infill sheets: 2 x Rails: 18 x Tek Screws
Code Colorbond Fencing Components
CS0900** Coloursmart Infill Sheet 890mm
CS1200** Coloursmart Infill Sheet 1190mm
CS1500** Coloursmart Infill Sheet 1490mm
CS1800** Coloursmart Infill Sheet 1790mm
CS2100** Coloursmart Infill Sheet 2090mm
CS2300** Coloursmart Infill Sheet 2390mm
CS3000** Coloursmart Channel Post 1800mm
CS3100** Coloursmart Channel Post 2100mm
CS3200** Coloursmart Channel Post 2400mm
CS2700** Coloursmart Channel Post 2700mm
CS3300** Coloursmart Channel Post 3000mm
CS4000** Coloursmart Rail 2400mm
CS4100** Coloursmart Rail 3180mm
CS6200** Coloursmart Gate Stile 1200mm
CS6500** Coloursmart Gate Stile 1500mm
CS6800** Coloursmart Gate Stile 1800mm
CS7200** Coloursmart Gate Stile 2100mm
Code Complete Breezeway Panels & Gates
CONFIG Breezeway Panel 2400 x 1200
CONFIG Breezeway Panel 2400 x 1500
CONFIG Breezeway Panel 2400 x 1800
CONFIG Breezeway Panel 2400 x 2100
Panel includes 3 x Infill sheets: 2 x Channel Posts: 3 x Rails: 1 x Breezeway Infill: 12 x Tek Screws
CONFIG Breezeway Panel 3180 x 1200
CONFIG Breezeway Panel 3180 x 1500
CONFIG Breezeway Panel 3180 x 1800
CONFIG Breezeway Panel 3180 x 2100
Panel includes 4 x Infill sheets: 2 x Channel Posts: 3 x Rails: 1 x Breezeway Infill: 12 x Tek Screws
CONFIG Breezeway Gate 930 x 1200
CONFIG Breezeway Gate 930 x 1500
CONFIG Breezeway Gate 930 x 1800
CONFIG Breezeway Gate 930 x 2100
Gate includes 2 x Gate Stiles: 1 x Infill sheets: 3 x Rails: 1 x Breezeway Infill: 18 x Tek Screws
CONFIG Breezeway Gate 1720 x 1200
CONFIG Breezeway Gate 1720 x 1500
CONFIG Breezeway Gate 1720 x 1800
CONFIG Breezeway Gate 1720 x 2100
Gate includes 2 x Gate Stiles: 2 x Infill sheets: 3 x Rails: 1 x Breezeway Infill: 18 x Tek Screws
Code Colorbond Breezeway Fencing Components
CS6250** Breezeway Gate Stile 1200mm
CS6550** Breezeway Gate Stile 1500mm
CS6850** Breezeway Gate Stile 1800mm
CS7250** Breezeway Gate Stile 2100mm
CONFIG Breezeway Panel Infill 2400 x 300
CONFIG Breezeway Panel Infill 3180 x 300
CONFIG Breezeway Gate Infill 830 x 300
CONFIG Breezeway Gate Infill 1720 x 300Breezeway Infills include 2 x Breezeway Pre-Slotted Posts & 3 x 65mm Infill Slats
Code Steel Posts
SP6524** Steel Post 65 x 2400mm
SP6530** Steel Post 65 x 3000mm
HW5600** Steel Post Cap 65 x 65
HW5340 Plastic Post Cap 65 x 65
SP5024** Steel Post 50 x 2400mm
SP5030** Steel Post 50 x 3000mm
HW5355 Plastic Post Cap 50 x 50
HW5060** Galvabond Cap 50 x 50