COLLEGE ARCHIVES

MC 40

JAMES S. REED

Acquisition: 1999

Processed: JL & EG

James Stalford Reed

(1938 – date)

Born: 1938, June 7

Married: Carol

Children:

Parents:

EDUCATION

1960 B.S. Ceramic Technology, Penn State University. Thesis: The formation of spinel and

order-disorder phenomena in spinel, MgAl2O4. [QE391.S68.RA 1960] Advisor G. W.

Brindley

Fall 1960 Carnegie Institute of Technology. Metallurgy

1965 Ph.D. Ceramic Science, Alfred University. Thesis: An Investigation of the Constitution of

Transition Metal Ions in a Spinel Matrix. [TP2.N36 1965 No.4] Advisor T. J. Gray

WORK/TEACHING

1965- Assistant Professor, Ceramic Engineering, NYSCollege of Ceramics at AU

1970-1971 Visiting Professor, University of California at Berkeley

1977 Visiting Professor, Ecole Nationale Superieure de Chemie, Paris, France

1978-1999 Professor, NYS College of Ceramics at AU

1997-1999 Dean, Ceramic Engineering and Materials Sciences, NYSCC at AU

HONORS/SOCIETIES:

1978 SUNY Chancellor’s Award for Excellence in Teaching

Danforth Associate at Alfred University

American Ceramic Society, fellow & member

National Institute of Ceramic Engineers

Phi Kappa Phi

Keramos

American Men of Science

PUBLICATIONS:

“Infrared spectral investigation of polyacrylate adsorption on alumina,” with D. H. Lee and R. A.,

Condrate, in Journal of Materials Science, Vol. 31, No. 2, 1996, pp.471-478.

“Mechanics of extrusion” with T. J. Martin and W. G Carlson in Science of whitewares.

Proceedings of the science of whiteware conference, 1995. Edited by Victoria E. Henkes,

George Y. Onoda and William Carty. Westerville, OH: American Ceramic Society, 1996

“Critical flaws in sintered compacts of alumina granules,” with D. Doshi, in Ceramic

Engineering and Science Proceedings, Vol. 16, No. 5, 1995, pp. 939-948.

“Polyethylene glycol binders for advanced ceramics,” with W. J. Walker and S. K. Verma, in

“Ceramic Engineering and Science Proceedings, Vol. 14, No. 11-12, 1993, pp. 58-79.

“Green testing of pressed compacts,” with W. J. Walker, in Ceramic Engineering and Science

Proceedings, Vol.14, no. 11-12, 1993, pp. 43-57.

“Effects of particle packing characteristics on solid-state sintering” with Jingmin Zheng, in

Journal of the American Ceramic Society, Vol. 72, No. 5, 1989, pp 810-917.

“Specific permeability of porous compacts as described by a capillary model,” with S. J.

Lukasiewicz, in Journal of the American Ceramic Society,Vol. 71, No. 1, 1988, pp. 1008-

1014.

“Particle and granule parameters affecting compaction efficiency in dry pressing,” with Jingmin

Zheng, in Journal of the American Ceramic Society, Vol. 71, No. 1, 1988 C-456-458.

“Critical issues and future directions in powder forming processes,” in Ceramic Transactions,

Vol I., pp 601-610, 1988.

“Packing density of alumina blends for substrates evaluated from pressure filtered-pressed

compacts,” with D. V. Miller, in Ceramic Transactions, Vol I., pp 733-740, 1988.

“The effect of granule size on green strength distributions of dry pressed alumina compacts,”

with B. D. Mosser III and J. Warner, in Ceramic Transactions, Vol. I, pp. 767-755, 1988.

“Phase development on reacting phosphoric acid with various Bayer-process aluminas,” with S.

Lukasiewicz, in American Ceramic Society Bulletin, Vol. 66, No. 6, 1987, pp. 1134-1138.

Principles of ceramics processing. New York: Wiley, 1994. Rev. ed. of: Introduction to the

principles of ceramic processing. 1987.

An introduction to physical ceramics: CES 407, fall semester, 1987. Prepared as curriculum

materials for a course taught at the New York State College of Ceramics at Alfred

University.

“A novel technique for producing a glass-ceramic bond in alumina abrasives,” in American

Ceramic Society Bulletin, Vol. 65, No. 11, 1986, pp. 1506-1512.

“Kinetic processes involved in the sintering and crystallization of glass powders” with Terence J.

Clark, in Journal of the American Ceramic Society, Vol. 69, No. 11, 1986, pp. 837-846.

Processing consequences of raw materials variables: Proceedings of 1982 Alfred Whitewares

Conference. Edited with James R. Varner, James E. Funk, and Paul F. Johnson. Alfred, NY:

Division of Ceramic Engineering and Science, NYSCC at AU, 1985

“Magnetic properties of press-forged barium ferrite,” with S. Dey, in American Ceramic Society

Bulletin, Vol. 64, No. 4, 1985, pp. 571-574

“Dependence of compaction on the glass transition temperature of the binder phase,” with Robert

A. DiMilia, in American Ceramic Society Bulletin, Vol.62, No. 4, 1983, pp. 484-488.

“Boundary conditions in electrical porcelain extrusion,” with D. Price, in American Ceramic

Society Bulletin, Vol. 62, No. 12, 1983, pp. 1348-1350.

“Stress transmission during the compaction of a spray-dried alumina powder in a steel die,” with

Robert A. DiMilia, in Journal of the American Ceramic Society, Vol. 66, No. 9, 1983, pp.

667-672.

“Dependence of compaction on the glass transition temperature of the binder phase,” with

Robert A. DiMilia, in American Ceramic Society Bulletin, Vol. 62, No. 4, 1983, pp. 484-

488.

Technical innovations in whitewares. Proceedings of 1981 Alfred Whitewares Conference.

Edited with James E. Funk, Paul F. Johnson, and James R. Varner. 1982, Alfred, NY: Alfred

University Press, 1982

“Effect of relative humidity on the compaction of barium titanate and manganese zinc ferrite

agglomerates containing polyvinyl alcohol,” with J. Anthony Brewer and Roger H. Moore,

in American Ceramic Society Bulletin, Vol. 60, No. 2, 1981, pp. 212-215, ?

“Microstructures and properties of permeable mold materials” with Ward E. Votava and Louis

M. Holleran, in American Ceramic Society Bulletin, Vol 58, No. 2, 1979, pp 194-197

“Extrusion behavior and microstructure development in alumina” with Angelo L. Salamone, in

American Ceramic Society Bulletin, Vol. 58, No. 12, 1979, pp 1175-1178

“Analysis of Cl- ions laundered from submicron zirconia powders” with Curtis E. Scott, in

American Ceramic Society Bulletin, Vol 57, No. 8, 1978, pp 741-743

“Dependence of sintering response with a constant rate of heating on processing-related pore

distributions” with Thomas J. Carbone, in American Ceramic Society Bulletin, Vol. 57, No.

8, 1978, pp.748-751.

“Character and compaction response of spray-dried agglomerates,” with Stanley J. Lukasiewicz,

in American Ceramic Society Bulletin, Vol. 57, No. 9, 1978, pp. 798-802.

“Powder Compaction” in Bi-monthly reports, New York State College of Ceramics at AU. Vol.1

(1977)

“Elastic moduli of refractory spinels,” with D. F. Porter and David Lewis, III, in Journal of the

American Ceramic Society, Vol. 60, No.7-8, 1977, pp. 345-349.

“Fabrication and flexural strength of ultrafine-grained yttria-stabilized zirconia,” with Paul H.

Rieth and A. Wayne Naumann, in American Ceramic Society Bulletin, Vol.55, No. 8, 1976,

pp. 717-721, 727.

“Dry pressing” with Robert B. Runk, in Ceramic fabrication processes, edited by Franklin F. Y.

Wang. New York: Academic Press, 1976

Ceramic engineering and science: emerging priorities. Edited with V. D. Frechette, and L. D.

Pye. New York: Plenum Press, 1974

“Mechanics of pressure slip casting,” with Terrence J. Fennelly, in Journal of the American

Ceramic Society, Vol. 55, No. 5, 1972, pp. 264-268.

“Optical absorption spectra of Cr3+ in MgO-Al2O3-MgO-3.5Al2O3 spinels,” in Journal of the

American Ceramic Society,” Vol. 54, No.4, 1971, pp. 202-204.

“Combustion for firing ceramics” in Firing Ceramics edited George A. Kirkendale. Alfred, NY:

NYSCC at AU, 1968

Advisor for:

Thesis (B.S.)

Ackart, Garrick W. Granulation of fine powders and the affect [sic] on flowability. 1997

Ackley, George A. Effect of plasticizer on the compaction behavior of spray granulated powders.

1980

Arnold, Terry Eugene. A study of the vibratory compaction of alumina utilizing the concept of

packing factor. 1968

Baron, Kenneth I. Thermal expansion and strength characteristics of LiAl34.6 SiOdified by

additions [sic] of P5and Al3. 1974

Basher, George Paul. Determination of viscosities and softening points in glasses and glazes.

1969

Bauer, Lawrence R. The investigation of impurities on stabilized zirconia. 1973

Bauer, Pamela J. Thermal expansion and chemical durability of phosphate glasses. 1981

Block, David James. A study of the effects of particle size variation on the filtration test

parameters and the stress-strain behavior of alumina bodies. 1969

Brewer, James Anthony. Compaction and green strength spray dried alumina and silicon

carbide. 1976

Brigham, Kristin. Determination of Gruneisen’s ratio for selected ceramic oxides. 1967

Brinckerhoff, Nate. Cordierite kiln furniture prepared from combinations of unfired materials

and prereacted materials. 1997

Brow, Rhonda. Low fire phosphate frit glazes. 1982

Brown, Thomas Joseph. The effect of varying frits on a permeable ceramic mold material. 1967

Burdette, Charles Kenneth, Jr. Utilization of the packing factor in studying the vibratory

compaction of ceramic materials. 1967

Burleigh, Jeanni R. Centrifugal casting for microscale processing. 1992

Burns, Gregory S. The formation and densification of cordierite. 1987

Busch, Trent D. The effects of Weibull moduli from sintering stages of Al203. 1993

Canfield, Nathan L. Lot to lot variation of Bikowski CR-30 alumina. 1997

Casciano, Richard Allen. An investigation of particle size distributions of alumina after

reduction by fluid energy milling. 1969

Castello, Carol J. Development of a wollastanite glaze for a wollastonite body. 1983

Chayka, Paul V. Reduction of maturation temperature for a whiteware body. 1981

Chrzan, David Stanley. An investigation of particle size distribution through the parameters of

ball milling aluminia. 1967

Cline, James. Sintering and forging of fly ash. 1978

Competti, Virginia Ann. The effect of powder particle size and firing temperature on the

sintering of yttria stabilized zirconia. 1978

Cooley, Richard Frank. Distribution of cations in aluminate spinels. 1970

Dam, Philip T. Thermal shock resistance of yttria partially stabilized zirconia. 1979

Davis, Dennis F. The effect of impurities on the grain growth of Bao-5-Fe3. 1974

Dichiara, Robert A., Jr. Particle size distribution and rheology of Alcoa alumina. 1981

Dillon, Gregory Paul. The development of a test for evaluating the effects of friction at the

interface between a plastic ceramic body and a metal die. 1990

Dowdle, Douglas Cloyse. An investigation of the heats of transitions using the differential

scanning calorimeter. 1970

Fattey, John D. The composition effect on the sintering behavior, sawing rate, and flexure

strength of yttria stabilized zirconia 6.5 m/o and 3.8 m/o mixtures. 1978

Feather, David Hoover. Rehabilitation of the verneuil furnace and the growth of selected spinels.

1968

Ferris, Emily A. Quartz-free, high strength porcelain body. 1985

Fleming, Mary M. The effects of particle size distribution and the presence of a glassy phase on

the sintering behavior of fine-powdered alumina. 1985

French, Charles Howard. The direct shear testing of alumina powder. 1972

Gallagher, Richard James. Analysis of the packing behavior of mullite. 1969

Ganung, James R. and Quinn, Barry F. A study of stress – Strain behavior in various clay bodies

with attempted correlation to West’s filtration tests. 1968

Glassmire, Cathleen M. The effects of hydrothermal treatment on the production of cordierite.

1986.

Graham, Julie A. Centrifugal casting of alumina slurries. 1994

Heinz, Merrill Robert. Flow patterns and stress distribution during ram pressing. 1968

Herring, Carl. Sintering and hot forging a novel whiteware body. 1981

Higby, Paige L. Dependence of flow and pressing properties of spray granulated A-16 alumina

on amount and type of additive and agglomerating liquid. 1982

Hill, Joseph W. Sintering at subnormal temperatures. 1976

Hirji, Nasiruddin Roshanally. Slag attack on basic refractories. 1972

Hoaglund, Nancy E. Direct granulation of ceramic powders. 1982

Horsley, James M. The microwave drying behavior of extruded alumina and a pH study of

bismuth superconductors. 1988

Incorvati, Cynthia Marie. The effect of surface impurity on dispersion and binder adsorption in

aqueous alumina suspensions. 1994

Jewart, Charles N., Jr. A study of lattice parameters in spinel solid solutions. 1972

Kelly, William. The investigation of improving an isostatically pressed SiOdy. 1972

King, Martin A. Characterization and refinement of a low firing whiteware body. 1982

Komar, Andrew V. Compaction of alumina granules containing PVA and gum Arabic. 1984

Kutbay, Cihat. Lithospar use in talc containing whitehware bodies. 1982

Kuzoch, Alicja M. The effects of a lubricant on plasticity, green strength and density of

whitewares. 1983

Lagan, C. J. An engineering study of the re-use of cordierite scrap as industrial kiln. 1995

Lang, Adam Kevin. The change in Weibull modulus with densification from sintering. 1992

Leonardi, Nicholas A. The effects of binder molecular weight on the pressure slip casting rates

of alumina. 1979

Loveland, Elizabeth, Ahl, Michael, and Cawley, James D. Effects of flocculation and

deflocculation on the drying rate of aqueous slurries of zircon. 1978

Lucas, Jeff. A study of the affects [sic] that firing temperature and pressing pressure have on the

properties of post fired [sic] scrap corderite [sic]. 1996

Marquit, Robert J. Developing unique ceramic mold material. 1981

Mathers, James Patrick. An investigation of the mechanical properties and thermal shock

resistance of zirconia fiber reinforced composites. 1970

Merchant, Stanley Richard. Modulus of elasticity and modulus of rupture of fused cast alumina

at elevated temperatures. 1967

Miller, David V. Extrusion of alumina using various molecular weight binders and binder

content. 1984

Moniot, Mark. Liquid phase assisted sintering of alumina using a crystallizing glass frit. 1987

Moore, Roger H. Sintering ceramics at subconventional temperatures. 1976

Morrow, Michael A. Characterization of collected dust particles from a manufacturing facility.

1997

Mroz, Thomas J. Factors affecting final density in an ultra-fine grained transformation

toughened zirconia. 1986

Munroe, Anthony Bruce. Investigation of a permeable ceramic mold body. 1969

Near, James M. Fast fire wall tile bodies utilizing wollastonite. 1983

Padden, Sheila A. Factors influencing the processing and microstructure of a zinc oxide varistor.

1987

Pasco, Wayne David. Thermal expansion characteristics of LiAl3.6SiOdified with Al3nd P5.

1973

Ploetz, Kristin Lisa. An analysis of the effect of white machining on the strength and dimensional

control of sintered alumina. 1993

Pokrzyk, Jay. Dilametric analysis of initial sintering characteristics of barium titanate. 1980

Pollak, Thomas M. Fabrication of a low fired whiteware through liquid phase sintering. 1974

Price, David B. High porosity SiC-Fiberfrax composite. 1978

Probst, Andrew B. The effect of porosity on flexure strength of 6 w/o yttria stabilized zirconia.

1980

Pryll, Sheldon M. Strength and thermal shock behavior of recycled waste cordierite. 1994

Raguso, Joseph A. The effect of processing variables on the sintering and crystallization of

stoichiometric cordierite. 1987

Roberts, Thomas Richard. An evaluation of a static mixing system for ceramic applications. 1970

Royston, Susan. Thermal expansion and chemical durability of phosphate glasses. 1980

Schillbach, Arlene. Strength developments in zirconia doped alumina and an investigation of

processing defects in chromia doped alumia. 1988

Schilling, Allan D. Characterization and determination of color disorder in 93% alumina

composition. 1986

Schuster, Peter A. Dimetral compression strength of vitrified bonded abrasives with various

aspect ratios and grain size. 1983

Schwabel, Gerald Joseph. The effect of frit concentration upon a dry pressed ceramic die

material. 1969

Schwabel, Mark George. High temperature Young’s modulus of stoicheiometric magnesium-

aluminate spinels. 1973

Sedore, Robert George. The effect of varying material composition and silica gel content on the

properties of a permeable mold material. 1968

Sites, Royal Halsey. A study of the conditions under which a high alumina body can be plastic

pressed. 1967

Smart, Linda P. Hot Forging at subnormal temperatures. 1979

Smith Nathan M. Compaction of silicon carbine granules containing PVA, PEG, and acrylic

binders. 1996

Smith, David N. Dependence of flow rate and packing of agglomerated powders on the shape

and size distribution of the agglomerates. 1981

Thorsland, Brett N. Relationship between particle packing and sintered density utilizing coarse

and fine grain alumina powders. 1995

Topping, Glenn R. Aluminun-phosphate [sic] bonding of refractory materials. 1962

Trautlein, David W. Thermal shock resistance. 1979

Tunnicliff, Jeffrey S. Effects of centrifuging on the casting behavior of an alumina slurry. 1991

Walker, John C. Effects of binder solution composition and content on the mixing, extrusion, and

subsequent properties of agglomerated and non-agglomerated alumina powders. 1989.

Zaun, Raymond B. Pressing properties of a nepheline syenite spray granulated body vs a

nepheline syenite spray dried body. 1983

Thesis (M.S.)

Ackley, George A. Plastic yield strength determined using the direct shear test, and extrusion

behavior of an electrical porcelain. 1982

Brewer, James Anthony. Compaction response of agglomerated powders - during isostatic

pressing. 1979

Carbone, Thomas Joseph. Dilatometric analysis of sintering behavior of zirconia and barium

titanate. 1976

Clark, Terence J. Closed die hot forging of vitrified bonded abrasives. 1980

Corbett, Daniel Wayne. Hot forging strontium ferrite permanent magnets. 1977

Croft, Thomas David. Mixing of ceramic suspensions and extrudable bodies. 1974

Dey, Sandwip Kumar. The effects of aspect ratio on the magnetic properties of pressed forged

barium ferrite permanent magnets. 1980

Dillon, Gregory P. Analysis of the effects of sodium stearate on the extrusion behavior of a

cordierite body. 1993

DiMilia, Robert A. Hot forging of barium titanate in the presence of a liquid phase. 1979

Fennelly, Terence John. A story of the mechanics of pressure slip casting alumia. 1970

Holleran, Louis Michael. The development of sintered ceramic molds for automatic jiggering.

1969

Huynh, Truc-Chi Thi. Phase composition of yttria partially-stablilized zirconia. 1978

Kerr, Mary C. An analysis of parameters affecting grinding rate and powder contamination

during attrition milling. 1988

Klug, Frederic J. Fabrication and magnetic properties of polycrystalline SrO.6Fe3. 1974

Lukasiewivz, Stanley John. Compaction of agglomerated and bulky ceramics powders. 1976

Martin, Tom. Electrical porcelain extrusion: analysis of effects due to reprocessed material

additions and liquid content variations. 1991

Miller, David V. Sintering behavior of alumina blends for substrates. 1986

Moore, Roger J. The dependence of compaction in a metal die on the character of egglomerated

feed powder.1979

Mosser, Benjamin D., III. Processing steps to eliminate green and fired defects in dry pressed

alumina substrates. 1987

Padden, Sheila A. Attrition milling: variables affecting grinding kinetics and powder

contamination. 1989

Pasco, Wayne David. Fabrication and sintering of boron-carbon doped beta silicon carbide.

1976.

Porter, Richard Lawrence. Crystallographic modifications of manganese dioxide. 1973

Price, David B. Filter cake development, extrusion behavior, and plastic property measurement

of a quartz electrical porcelain body. 1981

Rieth, Paul Hermann. Processing of ultrafine yttria stabilized zirconia. 1973

Sainamthip, Prinya. Fast fired tile bodies containing wollastonite. 1984

Salamone, Angelo L. Extrusion behavior and microstructure development in sintered alumina.

1978

Scott, Curtis Edward. Sintering and mechanical properties of strontium zirconate. 1974

Shashidhar, N. Development of a process for recycling porcelain scrap. 1987

Ten Eyck, John D. Flourine treatments of glass surfaces. 1977

Votava, Ward E. Preparation and analysis of unfired compacts using the scanning electron

microscope. 1980

Walker, William J., Jr. Polyethylene glycol binders for advanced ceramic processing. 1992

Zheng, Jingmin. Effects of green packing characteristics on solid state sintering. 1988

Thesis (Ph.D.)

Arrasmith, Steven R. Incipient flocculation molding – a new ceramic forming technique. 1998

Clark, Terence J. Preparation of glass ceramic bonds by the sintering and crystallization of glass

powder. 1984

DiMilia, Robert Anthony. Compaction study of spray-dried alumina agglomerates. 1981

Doshi, Dilip. Binder coagulation casting: a novel ceramic forming process.1999

Fleming, Mary M. The effects of particle size distribution and the presence of a glassy phase on

the sintering behavior of fine-powdered alumina. 1985

Locker, Robert John. The internal friction and ultimate shear strength of aqueous alumina-

methylcellulose systems. 1986

Lukasiewicz, Stanley John. Strength and permeability of phosphate bonded, fine grained

aluminas. 1984

Walker, William J., Jr. Powder compaction: processing to optimize the granule characteristics

for advanced ceramics. 1996

Wight, John Forrest, Jr. The extrusion of ceramics. 1996

PATENTS:

“Novel Witheware Body and Energy Efficient Processes for Same.” U.S.Patent 4,212,924, July

15, 1980.

“Incipient Flocculation Molding of Particulate Inorganic Materials.” U.S.Patent 5,908,588, June

1, 1999. With Syamal K. Ghosh, Dilip K. Chatterjee, Steven R. Arrasmith.

SERIES DESCRIPTION

Office files with course outlines and work. Includes student papers and correspondence.

Box 1

Correspondence. 1987-1999.

BCC (Binder Coagulation Casting) Reports – William J. Walker, 1997

Papers:

“Sintered permeable ceramic molds,” with L. M. Holleran.

“Pressure drop of extrusion in a square entry die,” with Jingmin Zheng and William B.

Carlson, 1991.

“Driving force and retarding of densification in solid state sintering,” with Jingmin Zheng

and Paul F. Johnson, 1990.

“Preliminary results for PVA adsorption on A16 SG amd A30 aluminas (Alcoa

Confidential), 1991.

“Progress Report” with R. L. DeRosa and J. Trapasso, 1999. Submitted to the Polymer-

Assisted Ceramic Manufacturing Research Center.

“FTIR spectral investigation of alumina surfaces and polyacrylate adsorption on them,” with

D. H. Lee and R. A. Condrate.

“Influence of slurry parameters on granule chateristics,” with William J. Walker and

Surendra K. Verma.

Eastman Kodak Research (including patent)

“Spray dried granules for pressing”

“Pressing”

Proposals

Courses:

CES 303 – Physical Ceramics

CES 306 – Operational Techniques

CES 327 – High Temperature Reaction Processes

CES 509 – Ceramic Frabrication Process

CES 510 – Ceramic Fabrication Process.

CES 515 – Research Seminar

CES 593 –

Short Course: Principles of plasticity and extrusion, 1993

Short Course: Forming Ceramics By Powder Pressing: Principles, Technology, and Quality,

1996

Student Papers:

Axelson, Scott. M.S. 1988. "Reaction-Bonded Silicon Nitride: a Chemical Method of

Preparation," 1986 - CES 509

Bihuniak, Peter. Ph.D. 1997. "Viscous Flow Sintering, "1976 - CES 510

Carnahan, Gary. M.S. 1993. "Gelation Reactions in Aqueous Polymer Solutions," 1991 – CES

510

Chakraborty, Indra. Ph.D. 1984. "Liquid Phase Sintering," – CES 510

Chatfield, Lawrence. B.S. 1991."Cavitation Phenomenon: Theory and Optimization of Particle

Dispersion," 1992 – CES 510

Corah, Chip. M.S. 1991. "Preparation of Ceramic Powders Using Emulsion Techniques,” 1986 –

CES 509

Dillon, Gregory. M.S. 1993. "The Adsorption of Organic Processing Additives in Oxide/

Aqueous Systems and Their Role in Modifying Interparticle Forces." – Independent Study

Dillon, Gregory. M.S. 1993. "The Use of Cylindrical Internal Reflectance FTIR to to

Characterize Interfaces in Acqueous Processing Systems," 1991 – CES 510

Dinger, Bruce. M.S. 1984. "Rheology and Stability of Clay-Water Systems," 1982 – CES 510

Doshi, Dilip. Ph.D. 1999. "Low Pressure Injection Molding: A Cost Effective Method for

Complex and Near-Net Shape Formation of Ceramics," 1992

Doshi, Dilip. Ph.D. 1999. "Research Report," 1992

Fleming, Mary. B.S. 1985. "Sintering in the Presence of a Liquid," 1985 – Independent Study

Glassmire, Cathleen. M.S. 1989. "A Review of the Processing of Alpha and Beta Silicon

Carbide," 1986

Gressler, Carole. M.S. 1988. "Nonconventional Methods of Preparation of Ceramic Powders,"

1986 – CES 509

Hexemer, Richard. M.S. 1988. "Preparation and Sintering of Alumina Gels Derived from

Pseudoboehmite"

Huffsmith, Sarah. B.S. 1989. "Hot Pressing of Ceramics," 1978 – CES 510

Jain, Alka. M.S. 1989. "Effect of Powder Characteristics on the Microstructure," 1986 – CES

509

Joseph, Innocent. Ph.D. 1985. "Sintering in the Presence of a Liquid Phase," CES 510

Kim, Sukyoung. M.S. 1986. "Deflocculation Theory," 1983 – Ceramic Fabrication Processing

Krubner, Ales. M.S. 1994. "Gelcasting of Binary Composites," 1992

Lee, Donghun. M.S. 1995. "Thermal Degredation of Polymers," 1994 – CES 510

Lee, Donghun. M.S. 1995. “Polyelectrolytes Adsorption," 1994 – CES 510

Likitvanichkul, Sumalee, Ph.D. 1997. "Gel Casting: A Novel Processing Technique," 1991 –

CES 510

Love, Mark. B.S. 1974. "Flow Patterns in Ram Pressed Ware," 1974 – CES 509

Paisley, Robert. M.S. 1977. 1976 – CES 510

Pierce, Laurie. B.S. 1985.

Price, David. M.S. 1981. "Compressibility and Permeability of an Electrical Porcelain," 1979 –

CES 510

Price, James. Ph.D. 1984. “Densification Mechanisms During Hot-Pressing," 1975

Rabidoux, Clifford. M.S. 1988. "Preparation and Characterization of Silicon Nitride Powders,"

1986 – CES 509

Rao, Madhav. "Effects of Extrusion Papameters on Extrusion Force."

Sainamthip, Prinya. Ph.D. 1987. "Comparison of Particle Size Distribution of Wollastonite Using

Microtrac and Sedigraph Analyzers," 1983 –CES 509

Shattes, David. B.S. 1983. "Spray Drying," 1983 – CES 409

Silsbee, Michael. M.S. 1984. "Gypsum Plaster Molds," 1982 – CES 510

Stanford, Gerald. Ph.D. 1983. "The Compaction of Potassium Bromide and Alumina Powders,"

1979 – CES 510

Steere, Thomas. M.S. 1985. "The Effect of Sulfuric Acid on Some Plaster Mold Properties,"

1981 – CES 510

Vitch, Susan. M.S. 1988. "Ion Exchange Strengthening of Glass," 1986 – CES 509

Votava, Ward. M.S. 1980. "Particle Size Characterization on the Scanning Electron Microscope,"

– CES 509

Wight, John. Ph.D. 1996. "Injection Molding of Ceramic Powders," 1994 – CES 550