Tutorial for Android users*with the CONNECTED WATCH App

TABLE OF CONTENTS

1. HOW TO USE THE WATCH

2. HOW TO PAIR THE WATCH TO YOUR DEVICE

1. STEP 1: PREPARE YOUR WATCH FOR PAIRING

2. STEP 2: DOWNLOAD THE CONNECTED APP TO YOUR ANDROID DEVICE

3. STEP 3: PREPARE YOUR DEVICE BY ENABLING BLUETOOTH

4. STEP 4: PAIR YOUR DEVICE UNDER ANDROID BLUETOOTH SETTINGS

3. REGISTRATION

4. SETUP NOTIFICATION

5. WATCH DEMO

Pairing

When the watch is OFF, press POWER & COMMAND buttons until 1st beep (approx. 3sec) and all icons will blink every 2 sec.

Reset the watch

First turn off the watch by Pressing the POWER button for 3 sec. Press and hold the 4 buttons together until you see all ALERT icons blinking. Then the watch will turns off.

Press PAGE LEFT or PAGE RIGHT to view additional information or back to the time mode

Back Light

Tap once the POWER button

Digital Display

Digital display supports Latin characters only

COMMAND

PAGE RIGHTPAGE LEFT

SET TIME

pull 1/2 way and turn to set the time

Icon, vibrate with optional beeps

POWER

Power on/off> 3 sec

NOTIFICATIONSDISPLAY

NOTIFICATIONS

Incoming Call, Missed Call notification:

Caller ID will be displayed during

incoming calls. Call numbers will be

Displayed if it has not been stored

as contact in your phone book.

*Caller ID supports Latin characters only.

Call notification

Caller ID

Text and Social Media alerts:

Support SMS, MMS and social

media posts on Facebook and

message notification from

Skype, Line, WhatsApp, WeChat, Instagram and more..

NOTIFICATIONS

Message notification

Number of notification

number of

notification

Calendar & Reminder alerts:

Email alerts:

event

notification

subject of

Calendar event

email

notification

NOTIFICATIONS

Low and Critical battery alerts:

The CONNECTED display shows the battery percentage and the low and critical battery icons blinks respectively.

percentage of

phone battery

NOTIFICATIONS

low battery alert

To find the COGITO watchThe watch beeps and blinks when tapping

The “find my watch” icon in the

Connected Watch App.

After tapping the out of range icon , the watch

beeps and blinks when your phone and watch are

apart from each other.

To activate out of range notification

NOTIFICATIONS

beep &vibration

To acknowledge the notificationPress the COMMAND button or check the notification on your mobile phone or tablet.

To mute/unmute your watchWhen there have no notification, press the

COMMAND button for 5 sec to change the notification mode of the watch.

NOTIFICATIONS

COMMAND

press 5 secto change notificationmode

Vibration only

Beep and Vibration

Notification mode

Tap the Camera icon in the Connected Watch App. Press the

COMMAND button of the watch, you can trigger the camera interface of the app and take photos remotely.

Action : Remote take picture

COMMAND

press once to trigger camera

Place your phonesomewhere for selfie

Launch the camera modeon the Connected Watch App

COMMAND

Action : Remote control music

When using the music player on your phone, you can use the COMMAND button to control the music playback.

Start the music player as you normally would on your Android Device. Once the music begins playing, you can use the COMMAND button to control playback.

• Play/Pause--short press the COMMAND button(press and release)

Press once to play or pause

When the default music player is active on your phone, the COMMANDbutton will assigned to control the music playback

Pair the watch • Get started

Tap the Play Store icon on

your device to download the free

App.

Then, tap ‘Search’ and type

‘Connected Watch’.

Select and download the

Connected Watch App.

BEFORE PAIR : DOWNLOAD THE APP ONTO YOUR DEVICE

Set your watch into the pairing mode

When the watch is OFF, press COMMAND +

POWER buttons until 1st beep (3sec) and allicons will blink.

PAIRING THE WATCH WITH YOUR DEVICE

COMMANDPOWER

When connected, the connected icon will be displayed on the watch

Press both

button for

3 sec

Sign up or Log into your

CONNECTEDEVICE Account

(! Note : New Users, please check your

email account for sign up confirmation.)

REGISTER WITH CONNECTEDEVICE ACCOUNT

Fill in all fields below and don’t forget to tap the ‘I agree’ checkbox

below. Tap ‘Sign-up!”.

ENABLING BLUETOOTH ON YOUR DEVICE

Ensure that your Bluetooth is

switched ON.

After the registration process,

tap the

icon on the bottom left to

see your Device RadarYou should see your COGITO

watch in your ‘Visible Devices’ List.

The text “Paired, Connected”

confirms successful pairing.

You can now use your watch to receive notifications!

CONFIRM DEVICE

PAIRING THE WATCH WITH YOUR DEVICE

Open the Connected App and then Search for COGITO Watch.

If Bluetooth is disabled you will be asked to enable it.

Launch your CONNECTED Watch App and tap Alerts, in the above right hand corner.

The color GREEN within the circular

knobs indicates the notifications

you will receive onto your watch.

If you wish to turn off certain

notifications,

swipe the circular knob to your left.

SET UP NOTIFICATION ITEMS

IF YOU WANT TO SEE THE ACTION OF THE WATCH

YOU CAN TRY THE DEMO

In your Connected Watch App home screen, tap the

icon on the bottom left to

see your Device Radar

Tap COGITO under your Visible Devices.

Then, tap ‘Demo Features’ in your

menu

Tap on the above icons to trigger

notifications to your watch.

An icon will then light up on your

watch face when you tap on each

demo function.

IF YOU WANT TO SEE THE ACTION OF THE WATCH

YOU CAN TRY THE DEMO

If you discovered a problem or that you are not

receiving notifications, please feel free to open a

support ticket at support@connectedevice.com

Please include your mobile phone model, OS

version, app version, and any other details to help

with the investigation.

PROBLEMS?

Thank you !