Codigo Leds y Temperatura
of 1
Transcript of Codigo Leds y Temperatura
-
7/24/2019 Codigo Leds y Temperatura
1/1
float temperature;int tempPin = 0; // Pin OUT from LM35 is connected to Pin A0int data;int led1=11;int led2=12;int led3=13;int n=0;void setup(){ pinMode(led1,OUTPUT); pinMode(led2,OUTPUT); pinMode(led3,OUTPUT); Serial.begin(9600); //baudrate adjust to your bluetooth module}void loop(){if(n==0){
temperature = analogRead(tempPin); temperature = temperature * 0.48828125; }
Serial.print(temperature);
if(Serial.available()) { int data = Serial.read(); delay(100); if(data=='1') digitalWrite(led1,1); if(data=='2') digitalWrite(led1,0); if(data=='3') digitalWrite(led2,1); if(data=='4')
digitalWrite(led2,0); if(data=='5') digitalWrite(led3,1); if(data=='6') digitalWrite(led3,0); delay(100); } delay(1000); n++; if(n>30){
n=0; }}
