Bring More Business this Festive Season With Christmas Themed Spot UV Business Cards
Code marker cards with strips SPOT-IT...
Transcript of Code marker cards with strips SPOT-IT...
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®
5 E S 5 T A
9 mm
13 m
m
19 m
m
38 m
m
58 m
m
92 m
m
page B2/1 B2/2 B2/3 B2/4 B2/5 B2/6
type S9 S13 S19 S38 S58 S92
standard colour of
the strip
white
yellow
white
yellow
white
yellow
white
yellow
white
yellow
white
yellow
dimension
of the strip (mm)*
6 x 9
9 x 9
9 x 13
11 x 13
15 x 13
16 x 13
14 x 19
16 x 19
19 x 19
23 x 38
32 x 38
23 x 58
29 x 58
32 x 92
38 x 92
45 x 92
I/08B2/0-01B2/0-01
Building on our great experience with SES-MARKERS-code marker cards as wire markers, we have developed Vinyl covered
cotton labels in the "SPOT-IT" series with the following properties :
Label protection with semi-rigid support cards on which markers are attached.
Labels can usually be removed without contamination of the adhesive due to a break-off tab or a pre-cut support.
The support card is processed so that small and large labels can be easily removed.
"SPOT-IT" markers are available in many different standard sizes (detail in the following pages).
"SPOT-IT" markers can also be supplied in special sizes for a minimum order quantity of 10 per size and print.
Code marker cards with strips SPOT-IT
* according to the legend.
❉www.klinkmann.com9 / 2011
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®
LASER
page B2/7
typeCode marker cards SPOT-IT unprinted Code marker sheets
SPOT-IT unprinted
Code marker cards
SPOT-IT
printed circuit boardsS19 S38 S58
colour of the strip white - yellow yellowwhite - blue - green
yellow - red
dimension
of the strips (mm)*19 x 11
38 x 6
38 x 9
38 x 11
38 x 16
38 x 23
58 x 13
58 x 23
12 x 9
15 x 9
18 x 6
19 x 11
20 x 8
28 x 11
38 x 11
56 x 22
60 x 34
2,45 x 4,75
III/10B2/0-02B2/0-02
Code marker cards with strips
* according to type.
page B2/7 B2/8
type
Code marker cards
SPOT-IT high tension
danger / danger
triangular labels
Code marker cards
SPOT-IT
high tension danger
Labels MYLAR
high tension danger
Code marker cards
MYLAR high tension
danger / danger
triangular labels
colour of the strips yellow yellow yellow yellow
dimension
of the strips (mm)*
Heights
16
24
42
80
5 x 7,5
9 x 13
14 x 19
20 x 38
25 x 58
35 x 92
54 x 92
14 x 19
12 x 24
16 x 30
21 x 38
22 x 45
26 x 58
32 x 70
40 x 88
50 x 110
60 x 135
75 x 170
91 x 214
120 x 262
Heights
16
24
42
80
❉www.klinkmann.com9 / 2011
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®
RoHS
M N O P QM N O P QM N O P QM N O P Q
Code marker cards SES-MARKERS®
S 9 printed Quality TEV
I/11B2/1-01B2/1-01
Material: TEV vinyle covered cotton
Temperature range: -30 to +105°C (class A)-40 to +150°C (short duration)
Operating temperature: +10 to +40°CAdhesive: special thermal setting adhesiveAdherence on steel: 2,5 N/cmTensile strength at break: 80 N/cm
Dimension of the card: 255 x 48 mmPrint height: 6,3 mm
Quantity strips per card: 100 to 152 (according to legend)Strip size: 6 to 9 x 9 mm (according to legend)Strip thickness: 0,30 mmStandard colours: white - yellow
Pack: 10 cards same legend (for smaller quantities an extra charge will be applied).
S 9
Figures and letters repeated
Figures and letters in series
Symbolsrepeated
• Product information
❉www.klinkmann.com9 / 2011
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®
RoHS
0 0 1521 1 1522 2 1523 3 1524 4 1525 5 1526. 6 1527 7 1528 8 1529. 9 152
A A 152B B 152C C 152D D 152E E 152F F 152G G 152H H 152I I 152J J 152K K 152L L 152M M 100N N 152O O 152P P 152Q Q 152R R 152S S 152T T 152U U 152V V 152W W 100X X 152Y Y 152Z 152
0 3 0 1 0 0 1 3 0 0 1 5
0 3 0 1 0 0 1 3 0 0 4 0 - 9
0 3 0 1 0 0 1 3 0 0 1 x x x x
0 3 0 1 0 0 1 3 0 0 4 x x x x
A ➔ Z 1480 ➔ 9. 152
100
100
100
100
100
100
100
6 x 9 mm
9 x 9 mm
Code marker cards SES-MARKERS®
S 9 printed Quality TEV
I/08B2/1-02B2/1-02
detail article
Example for order:
Strip S9 white - legend 5
Strip S9 yellow - legend 0 ➔ 9.
code group
codecolour
code legend
Other legends upon request with a minimum of order of 10 cards.
Article number white strip
Article number yellow strip
code group
detail article
codecolour
code legend
❉www.klinkmann.com9 / 2011
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®
RoHS
0 1 2 3 4 5 6. 7 8 9.0 1 2 3 4 5 6. 7 8 9.0 1 2 3 4 5 6. 7 8 9.
Code marker cards SES-MARKERS®
S 13 printed Quality TEV
I/11B2/2-01B2/2-01
Material: TEV vinyle covered cotton
Temperature range: -30 to +105°C (class A)-40 to +150°C (short duration)
Operating temperature: +10 to +40°CAdhesive: special thermal setting adhesiveAdherence on steel: 2,5 N/cmTensile strength at break: 80 N/cm
Dimension of the card: 255 x 48 mmPrint height: 9 mm
Quantity strips per card: 42 to 78 (according to legend)Strip size: 9 to 16 x 13 mm (according to legend)Strip thickness: 0,30 mmStandard colours: white - yellow
Pack: 10 cards same legend (for smaller quantities an extra charge will be applied).
S 13
Figures and letters repeated
Figures and letters in series
• Product information
Symbolesrepeated
❉www.klinkmann.com9 / 2011
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®
RoHS
0 0 781 1 782 2 783 3 784 4 785 5 786. 6 787 7 788 8 789. 9 78
10 10 4211 11 4212 12 4213 13 4214 14 4215 15 4216 16 4217 17 4218 18 4219 19 4220 20 4221 21 4222 22 4223 23 4224 24 4225 25 4226 26 42
A A 78B B 78C C 78D D 78E E 78F F 78G G 78H H 78I I 78J J 78K K 78L L 78M M 60N N 78O O 78P P 78Q Q 78R R 78S S 78T T 78U U 78V V 78W W 60X X 78Y Y 78Z Z 78
11 x 13 mm0 3 0 1 0 0 0 3 0 0 1 D
0 3 0 1 0 0 0 3 0 0 4 C E
0 3 0 1 0 0 0 3 0 0 1 x x x x
0 3 0 1 0 0 0 3 0 0 4 x x x x
A ➔ Z A-Z 780 ➔ 9. 0-9 78
TERN 60
TERV 60
TEPN 60
TEPV 60
MAS 60
CE 45
EQUI 60
E
16 x 13 mm
249 x 13 mm
15 x 13 mm
B2/2-02❉
Code marker cards SES-MARKERS®
S 13 printed Quality TEV
I/08B2/2-02
uantitcode strips
legend legend /card
uantitcode strips
legend legend /card
uantitcode strips
legend legend /card
detail article
Example for order:
Strip S13 white - legend D
Strip S13 yellow - legend CE
code group
codecolour
code legend
Other legends upon request with a minimum of order of 10 cards.
Article number white strip
Article number yellow strip
code group
detail article
codecolour
code legend
www.klinkmann.com9 / 2011
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®
RoHS
55555555
0 1 2 3 4 50
1 9. 8 7 6.A B C D E FGF E DCB A ZEEEEEEEEEEEE5555555555555555
Code marker cards SES-MARKERS®
S 19 printed Quality TEV
I/08B2/3-01B2/3-01
Material: TEV vinyle covered cotton
Temperature range: -30 to +105°C (class A)-40 to +150°C (short duration)
Operating temperature: +10 to +40°CAdhesive: special thermal setting adhesiveAdherence on steel: 2,5 N/cmTensile strength at break: 80 N/cm
Dimension of the card: 255 x 48 mmPrint height: 15 mm
Quantity strips per card: 24 to 32 (according to legend)Strip size: 14, 16 and 19 x 19 mm
(according to legend)Strip thickness: 0,30 mmStandard colour: white - yellow
Pack: 10 cards same legend (for smaller quantities an extra charge will be applied).
S 19
Symbolsrepeated
Figures and letters repeated
Figures and letters in series
• Product information
❉www.klinkmann.com9 / 2011
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®
RoHS
0 0 321 1 322 2 323 3 324 4 325 5 326. 6 327 7 328 8 329. 9 32
A A 32B B 32C C 32D D 32E E 32F F 32G G 32H H 32I I 32J J 32K K 32L L 32M M 32N N 32O O 32P P 32Q Q 32R R 32S S 32T T 32U U 32V V 32W W 28X X 32Y Y 32Z Z 32
0 3 0 1 0 0 0 4 0 0 1 S
0 3 0 1 0 0 0 4 0 0 4 T E PV
0 3 0 1 0 0 0 4 0 0 1 x x x x
0 3 0 1 0 0 0 4 0 0 4 x x x x
A ➔ Z A-Z 320 ➔ 9. 0-9 32
S
19 x 19 mm
+ 32
- 32
TERN 32
TERV 32
TEPN 24
TEPV 24
CE 32
EQUI 32
W16 x 19 mm14 x 19 mm
B2/3-02❉
Code marker cards SES-MARKERS®
S 19 printed Quality TEVWhite or yellow strip, black print
I/08B2/3-02
numbercode strips
legend legend /card
numbercode strips
legend legend /card
numbercode strips
legend legend /card
détail article
Example for order:
Strip S19 white - legend S
Strip S19 yellow - legend protected earth
code group
codecolour
code legend
Other legends upon request with a minimum of order of 10 cards.
Article number white strip
Article number yellow strip
code group
détail article
codecolour
code legend
www.klinkmann.com9 / 2011
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®
RoHS
4 44
K L M0 1 2 34 4 4P P P P P
L2 L2 L2
Code marker cards SES-MARKERS®
S 38 printed Quality TEV
I/08B2/4-01B2/4-01
Material: TEV vinyle covered cotton
Temperature range: -30 to +105°C (class A)-40 to +150°C (short duration)
Operating temperature: +10 to +40°C
Adhesive: special thermal setting adhesiveAdherence on steel: 2,5 N/cmTensile strength at break: 80 N/cm
Dimension of the card: 255 x 48 mmPrint height: 25 mm
Strips per card: 7 and 10 (according to legend)Strip size: 23 to 32 x 38 mm (according to legend)Strip thickness: 0,30 mmStandard colour: white - yellow
Pack: 10 cards same legend (for smaller quantities an extra charge will be applied).
S 38
Figures and letters repeated
Figures and letters in series
Symbolsrepeated
• Product information
❉www.klinkmann.com9 / 2011
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®
RoHS
0 0 101 1 102 103 104 105 106. 107 108 109. 10
10 7
A 10B 10C 10D 10E 10F 10G 10H 10I 10J 10K 10L 10M 10N 10O O 10P 10Q 10R 10S 10T 10U 10V 10W 10X 10Y 10Z 10
0 3 0 1 0 0 0 5 0 0 1 5
0 3 0 1 0 0 0 5 0 0 4 L 1
0 3 0 1 0 0 0 5 0 0 1 x x x x
0 3 0 1 0 0 0 5 0 0 4 x x x x
A ➔ J 10K ➔ T 10U ➔ Z 100 ➔ 9. 10
10
10
10
10
10
10
10
23 x 38 mm
32 x 38 mm
L1 7L2 7L3 7
25 x 38 mm
B2/4-02❉
Code marker cards SES-MARKERS®
S 38 printed Quality TEV
I/08B2/4-02
detail article
Example for order:
Strip S38 white - legend 5
Strip S38 yellow - legend L1
code group
codecolour
code legend
Other legends upon request with a minimum of order of 10 cards.
Article number white strip
Article number yellow strip
code group
detail article
codecolour
code legend
www.klinkmann.com9 / 2011
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®
RoHS
BCD
ABC0123BBB22222
230
V23
0 V
230
V40
0 V
400
V40
0 V
400
V40
0V
Code marker cards SES-MARKERS®
S 58 printed Quality TEV
I/08B2/5-01B2/5-01
Material: TEV vinyle covered cotton
Temperature range: -30 to +105°C (class A)-40 to +150°C (short duration)
Operating temperature: +10 to +40°CAdhesive: special thermal setting adhesiveAdherence on steel: 2,5 N/cmTensile strength at break: 80 N/cm
Dimension of the card: 255 x 75 mmPrint height: 45 mm
Quantity strips per card: 8 to 10 (according to legend)Strip size: 23 and 29 x 58 mm (according to legend)Strip thickness: 0,30 mmStandard colours: white - yellow
Pack: 10 cards same legend (for smaller quantities an extra charge will be applied).
S 58
Legend for voltagerepeated
Figures and letters repeated
Figures and letters in series
• Product information
❉www.klinkmann.com9 / 2011
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®
RoHS
0 0 101 102 103 104 105 106. 107 108 109. 10
A 10B 10C 10D 10E 10F 10G 10H 10I 10J 10K 10L 10M 8N 10O O 10P 10Q 10R 10S 10T 10U 10V 10W 8X 10Y 10Z 10
0 3 0 1 0 0 0 6 0 0 1 T
0 3 0 1 0 0 0 6 0 0 4 2 3 0 V
0 3 0 1 0 0 0 6 0 0 1 x x x x
0 3 0 1 0 0 0 6 0 0 4 x x x x
A ➔ J 10K ➔ T 10U ➔ Z 100 ➔ 9. 10
23 x 58
110V* 10220V* 10230V* 10380V* 10400V* 10
29 x 58
Code marker cards SES-MARKERS®
S 58 printed Quality TEV
I/08B2/5-02B2/5-02
detail article
Example for order:
Strip S58 white - legend T
Strip S58 yellow - legend 230V
code group
codecolour
code legend
Other legends upon request with a minimum of order of 10 cards.
Article number white strip
Article number yellow strip
code group
detail article
codecolour
code legend
* Horizontal print, print height 15 mm.
❉www.klinkmann.com9 / 2011
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®
RoHS
SSA B C789B B B111
230
V23
0 V
230
V40
0 V
400
V40
0 V
400
V
Code marker cards SES-MARKERS®
S 92 printed Quality TEV
I/08B2/6-01B2/6-01
Material: TEV vinyle covered cotton
Temperature range: -30 to +105°C (class A)-40 to +150°C (short duration)
Operating temperature: +10 to +40°C
Adhesive: special thermal setting adhesiveAdherence on steel: 2,5 N/cmTensile strength at break: 80 N/cm
Dimension of the card: 255 x 105 mmPrint height: 66 mm
Quantity strips per card: 5 to 7 (according to legend)Strip size: 32 to 45 x 92 mm (according to legend)Strip thickness: 0,30 mmStandard colours: white - yellow
Pack: 10 cards same legend (for smaller quantities an extra charge will be applied).
S 92
Legends for voltagerepeated
Figures and letters repeated
Figures and letters in series
• Product information
❉www.klinkmann.com9 / 2011
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®
RoHS
0 71 72 73 74 75 76. 77 78 79. 7
A 7B 7C 7D 7E 7F 7G 7H 7I 7J 7K 7L 7M 6N 7O O 7P 7Q 7R 7S 7T 7U 7V 7W 5X 7Y 7Z 7
0 3 0 1 0 0 0 7 0 0 1 A
0 3 0 1 0 0 0 7 0 0 4 0 - 6
0 3 0 1 0 0 0 7 0 0 1 x x x x
0 3 0 1 0 0 0 7 0 0 4 x x x x
A ➔ G 7H ➔ N 7O ➔ U 7V ➔ Z 50 ➔ 6. 77 ➔ 9. 6
32 x 92 mm230V* 7400V* 7
45 x 92 mm38 x 92 mm
Code marker cards SES-MARKERS®
S 92 printed Quality TEV
I/08B2/6-02B2/6-02
detail article
Example for order:
Strip S92 white - legend A
Strip S92 yellow - legend 0 ➔ 6.
code group
codecolour
code legend
Other legends upon request with a minimum oforder of 10 cards.
Article number white strip
Article number yellow strip
code group
detail article
codecolour
code legend
❉
* Horizontal print, print height 15 mm.
www.klinkmann.com9 / 2011
SSSPPPOOOTTT--- IIITTT
RoHS
SPOT-IT S19/11 A 0301 0341 001 0301 0441 004 19 x 11 40 10
SPOT-IT S38/11 A 0301 0358 001 0301 0458 004 38 x 11 20 10
SPOT-IT S58/22 A 0301 0368 001 0301 0468 004 58 x 23 10 10
SPOT-IT S19/11 S 0301 0340 001 0301 0440 004 19 x 11 40 10
SPOT-IT S38/06 S 0301 0350 001 0301 0450 004 38 x 6 37 10
SPOT-IT S38/09 S 0301 0351 001 0301 0451 004 38 x 9 25 10
SPOT-IT S38/11 S 0301 0352 001 0301 0452 004 38 x 11 20 10
SPOT-IT S38/16 S 0301 0353 001 0301 0453 004 38 x 16 14 10
SPOT-IT S38/22 S 0301 0354 001 0301 0454 004 38 x 23 10 10
SPOT-IT S58/13 S 0301 0360 001 0301 0460 004 58 x 13 18 10
SPOT-IT S58/22 S 0301 0362 001 0301 0462 004 58 x 23 10 10
Code marker cards with strips SPOT-ITQuality TEV
I/11B2/7-01B2/7-01
Material: TEV vinyle covered cotton
Temperature range: -30 to +105°C (class A)-40 to +150°C (short duration)
Operating temperature: +10 to +40°CAdhesive: special thermal setting adhesiveAdherence on steel: 2,5 N/cmTensile strength at break: 80 N/cm
Dimension of the card: S19: 255 x 48 mmS38: 255 x 73 mmS58: 255 x 105 mm
Strip thickness: 0,30 mmStandard colours: white - yellow
Specification: available with or without frame. For an individual mar-king by hand (with nylon point pen, ball point pen, or pencil).
SPOT-IT
Other colours upon request.
• Code marker cards SPOT-IT unprinted framed
001 004
001 004
• Code marker cards SPOT-IT unprinted unframed
❉www.klinkmann.com9 / 2011
SSSPPPOOOTTT--- IIITTT
RoHS
SPOT-IT S 12/09 12 x 9 405 10SPOT-IT S 15/09 15 x 9 324 10SPOT-IT S 18/06 18 x 6 400 10SPOT-IT S 20/08 20 x 8 270 10
SPOT-IT A 15/09 15 x 9 324 10SPOT-IT A 19/11 19 x 11 198 10SPOT-IT A 28/11 28 x 11 132 10SPOT-IT A 38/11 38 x 11 88 10SPOT-IT A 56/22 56 x 22 33 10SPOT-IT A 60/34 60 x 34 21 10
LASER
B2/7-02❉
Sheets wxith strips SPOT-ITLASER printable Quality TEV
II/11B2/7-02
Material: TEV vinyle covered cotton
Temperature range: -30 to +80°C
Operating temperature: +10 to +40°C
Adhesive: acrylic
Adherence on steel: 4,5 N/cm
Standard colour: yellow
Specification: available with or without frame. For a LASER or anindividual marking by hand (with nylon point pen, ball point pen, orpencil).
SPOT-IT
• Sheet with strips SPOT-IT unprinted unframed
Laser printing: By using the WordTM software, it is possible, thanks to the function "envelopesand labels" under "tools", to print labels SPOT-IT starting from your computer. You can downloadthe document templates for these labels on our web site: www.ses-sterling.com, choose Services, then Download.
• Protection of the print
For the protection of the Laser print, please use the protecting varnish in aerosol cans:
Protecting varnish contents: 400 ml
B1/7-01
• Sheet with strips SPOT-IT unprinted unframed
www.klinkmann.com9 / 2011
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®
RoHS
S 5/01 752 10S 5/02 752 10S 5/03 752 10S 5/04 752 10S 5/07 752 10
Code marker cards SES-MARKERS®
with strips SPOT-IT Quality TEV
for printed circuits boards
I/08B2/7-03B2/7-03
Material: TEV vinyle covered cotton
Temperature range: -30 to +105°C (class A)-40 to +150°C (short duration)
Operating temperature: +10 to +40°CAdhesive: special thermal setting adhesiveAdherence on steel: 2,5 N/cmTensile strength at break: 80 N/cm
Dimensions of the strip: 2,45 x 4,75 mmDimensions of the card: 255 x 48 mmStrip thickness: 0,30 mmStandard colours: white - blue - green - yellow - redPack: 10 cards same legend (for smaller
quantities an extra charge will be applied).
Specification: used for the location on printed circuits.
SPOT-IT
❉
whiteblue
greenyellow
red
www.klinkmann.com9 / 2011
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®
RoHS
V-17 EL 16 20 10V-26 EL 24 12 10V-45 EL 42 7 10V-85 EL 80 3 10
V-17 D 16 20 10V-26 D 24 12 10V-45 D 42 7 10V-85 D 80 3 10
V-17 EL V-26 EL
V-45 EL V-85 EL
V-17 D V-26 D
V-45 D V-85 D
Code marker cards SES-MARKERS®
with triangular strips SPOT-IT Quality TEV
Electrical danger - Danger
I/08B2/7-04B2/7-04
Material: TEV vinyle covered cotton
Temperature range: -30 to +105°C (class A)-40 to +150°C (short duration)
Operating temperature: +10 to +40°CAdhesive: special thermal setting adhesiveAdherence on steel: 2,5 N/cmTensile strength at break: 80 N/cm
Strip thickness: 0,30 mmStandard colour: yellow
Specifications: used for the warning of the electric dangers andgeneral danger.
SPOT-IT
❉www.klinkmann.com9 / 2011
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®
RoHS
S 58 TEN S 92 TEN
S 8 TEN 5 x 7,5 225 10S 13 TEN 9 x 13 78 10S 19 TEN 14 x 19 32 10S 38 TEN 20 x 38 11 10S 58 TEN 25 x 58 9 10S 92 TEN 35 x 92 6 10S 93 TEN 54 x 92 4 10
S 19 TENS 13 TEN
S 38 TEN
S 8 TEN
S 93 TEN
Code marker cards SES-MARKERS®
with strips SPOT-IT Quality TEV
HIGH TENSION FLASH SYMBOL
I/08B2/7-05B2/7-05
Material: TEV vinyle covered cotton
Temperature range: -30 to +105°C (class A)-40 to +150°C (short duration)
Operating temperature: +10 to +40°CAdhesive: special thermal setting adhesiveAdherence on steel: 2,5 N/cmTensile strength at break: 80 N/cmStrip thickness: 0,30 mmStandard colour: yellow
Specifications: used for the warning of the electric dangers.
SPOT-IT
❉www.klinkmann.com9 / 2011
SSSEEESSS®
S H RoHS
MYLAR 14 x 19 0308 0001 000 0308 0021 004 16 12 1
MYLAR 12 x 24 0308 0002 000 0308 0022 004 20 10 1
MYLAR 16 x 30 0308 0003 000 0308 0023 004 25 8 1
MYLAR 21 x 38 0308 0004 000 0308 0024 004 32 6 1
MYLAR 22 x 45 0308 0005 000 0308 0025 004 40 5 1
MYLAR 26 x 58 0308 0006 000 0308 0026 004 50 4 1
MYLAR 32 x 70 0308 0007 000 0308 0027 004 63 3 1
MYLAR 40 x 88 0308 0008 000 0308 0028 004 80 3 1
MYLAR 50 x 110 0308 0009 000 0308 0029 004 100 1 1
MYLAR 60 x 135 0308 0010 000 0308 0030 004 125 1 1
MYLAR 75 x 170 0308 0011 000 0308 0031 004 160 1 1
MYLAR 91 x 214 0308 0012 000 0308 0032 004 200 1 1
MYLAR 120 x 262 0308 0013 000 0308 0033 004 250 1 1
SES-MARKERS® bandswith strip in laminated MylarHIGH TENSION FLASH SYMBOL
II/11B2/8-01B2/8-01
Material: polyesterAdhesive: permanent acrylic
Temperature range: -40 to +150°C Operating temperature: > +10°CAdherence on inox: 5,20 N/cm
Flame resistance: self-extinguished
Strip thickness: 60 μm
Standard colour: yellowPrint colours: black - red
Similar to the standards: NFC 03-417 and IEC 417 symbol 5036DIN 40008/4844ISO 3864
Specifications: these labels, in laminated Mylar, have a very goodadherence and offer a good resistance to the chemical agents and theatmospheric conditions.
MYLAR
typearticle number
black printarticle number
red print
arrowheight mm
quantitystrips/band
❉www.klinkmann.com9 / 2011
RoHS
MYLAR V-17 EL 0308 0091 004 ELE 16 20 10
MYLAR V-26 EL 0308 0092 004 ELE 24 12 10
MYLAR V-45 EL 0308 0093 004 ELE 42 7 10
MYLAR V-85 EL 0308 0094 004 ELE 80 3 10
MYLAR V-17 D 0308 0091 004 ! 16 20 10
MYLAR V-26 D 0308 0092 004 ! 24 12 10
MYLAR V-45 D 0308 0093 004 ! 42 7 10
MYLAR V-85 D 0308 0094 004 ! 80 3 10
V-17 EL V-26 EL
V-45 EL V-85 EL
V-17 D V-26 D
V-45 D V-85 D
S H
SSSEEESSS---MMMAAARRRKKKEEERRRSSS®Code marker cards SES-MARKERS®
with triangular strips Mylar MylarElectrical danger - Danger
Material: polyesterAdhesive: permanent acrylic
Temperature range: -40 to +150°C Operating temperature: > +10°CAdherence on inox: 5,20 N/cm
Flame resistance: self-extinguished
Strip thickness: 60 μm
Standard colour: yellowPrint colour: black
Similar to the standards: NFC 03-417 et IEC 417DIN 40008/4844 - ISO 3864
Specifications: these labels, in laminated Mylar, have a very goodadherence and offer a good resistance to the chemical agents and theatmospheric conditions.
MYLAR
type article number
stripheight mm
quantitystrips/band
type article number
stripheight mm
quantitystrips/band
Scale 1/1
Scale 1/1
Yekaterinburgtel. +7 343 376 [email protected]
St. Petersburgtel. +7 812 327 [email protected]
Moscowtel. +7 495 641 [email protected]
Кievtel. +38 044 495 33 [email protected]
Helsinkitel. +358 9 540 [email protected]
Vilniustel. +370 5 215 [email protected]
Rigatel. +371 6738 [email protected]
Мinsktel. +375 17 200 [email protected]
Tallinntel. +372 668 [email protected]
Samaratel. +7 846 273 95 [email protected]
www.klinkmann.com
SES_Marking_Code_Marker_Label_Cards_en_0911.pdf