COD Chemical Oxygen Demand
1
Wastewater needs to be monitored closely to prevent environmental pollution and human illness HI 83099 is one of the most versatile photometers on the market. In addition to COD, this meter measures up to 44 of the most important water quality parameters. With Great Products Come Great Results HEAD OFFICE – JHB Hanna Instruments (Pty) Ltd 6 Vernon Road Morninghill, Bedfordview T: (011) 615 6076 F: (011) 615 8582 E: [email protected] CAPE TOWN BRANCH Unit B 18 Bellville Business Park Belville, Cape Town T: (021) 946 1722 F: (021) 946 1723 E: [email protected] DURBAN BRANCH 2 Sunnyside Centre 48 Sunnyside Lane Pinetown T: (031) 701 2711 F: (031) 701 2706 E: [email protected] www.hanna.co.za Municipal Wastewater • Industrial Wastewater • Environmental Testing Chemical Oxygen Demand HI 83099 HI 839800 Even a novice can safely run accurate COD tests in just 3 simple steps: 1. Place the vial in the reactor and set the timer 2. Fill the pre-dosed vial with the sample 3. Place the vial in the HI 83099 and read the results Measurement Procedure The entire COD measurement process has been designed for ease of use by personnel at any skill level. In addition, all HANNA equipment has been designed for maximum safety during handling and testing with a minimum amount of waste. HANNA’s HI 839800 test tube reactor accepts up to 25 standard 16mm diameter cuvets for each reaction cycle. An accurate tem- perature control system ensures the digestion develops exactly at 150°C ±2°C as required. • Low temperature alert - Appears when the block is warming up and the temperature is below the set value. • High temperature alert - Appears when the block is warming up and the temperature is above the set value. • Countdown timer - Shows time remaining until the heating element shuts off.
Transcript of COD Chemical Oxygen Demand
Wastewater needs to be monitored closely to prevent environmental pollution and human illness
HI 83099 is one of the most versatile photometers on the market. In addition to COD, this meter measures up to 44 of the most important water quality parameters.
CODCODCODCODCODCODCODCODCODCODCODCODCODCODCODCODCODCODCODCODCOD
With Great Products Come Great Results
HEAD OFFICE – JHBHanna Instruments (Pty) Ltd6 Vernon RoadMorninghill, BedfordviewT: (011) 615 6076F: (011) 615 8582E: [email protected]
CAPE TOWN BRANCHUnit B18 Bellville Business ParkBelville, Cape TownT: (021) 946 1722F: (021) 946 1723E: [email protected]
DURBAN BRANCH2 Sunnyside Centre48 Sunnyside LanePinetownT: (031) 701 2711F: (031) 701 2706E: [email protected]
www.hanna.co.za
Municipal Wastewater • Industrial Wastewater • Environmental TestingChemical Oxygen Demand
HI 83099 HI 839800
Even a novice can safely run accurate COD tests in just 3simple steps:1. Place the vial in the reactor and set the timer2. Fill the pre-dosed vial with the sample3. Place the vial in the HI 83099 and read the results
Measurement ProcedureThe entire COD measurement process has been designed for ease of use by personnel at any skill level. In addition, all HANNA equipment has been designed for maximum safety during handling and testing with a minimum amount of waste.
HANNA’s HI 839800 test tube reactor accepts up to 25 standard 16mm diameter cuvets for each reaction cycle. An accurate tem-perature control system ensures the digestion develops exactly at 150°C ±2°C as required.• Low temperature alert - Appears when the block is warming up and the temperature is below the set value.• High temperature alert - Appears when the block is warming up and the temperature is above the set value.• Countdown timer - Shows time remaining until the heating element shuts off.
