Coatings removal
1
es securely with thumb screws and its hinged side stays upright when open, but closes easily to help reduce vapor emissions. Its large 18-in. lid opening makes filling easy, and its polyethylene construc- tion will not rust or corrode. To aide in waste segregation, the funnel is available in three colors -- black, red, and yellow. Circle 315 on reader service card COATINGS REMOVAL NitroCision www. nitrocision.com NitroCision has introduced NitroJet to the auto manufactur- ing and aeronautics industries as an alternative to water jet tech- nology. The technology uses liquid nitrogen instead of water to cut and remove coatings. It cleans as it cuts, then disappears as it returns to its original gaseous state in the earth's atmosphere. It has applications in the machining of exotic materials and can remove coatings from a variety of substrate materials including metal, plastic, ceramic, and fiber- glass. Because nitrogen is inert and compatible with most chemi- cals, NitroJet can be used with flammable or explosive materials and those sensitive to moisture. It shares similar capabilities with water jet technology, but because it cuts without the use of pressur- ized water, it does not generate a secondary stream of waste. Circle 316 on reader service card H~-D~ SOAK ¢¢FJU~i|S Houghton International Inc. www.houghtonintl.corn Houghton's International's Surface Finishing division is offering two heavy-duty immer- sion cleaners that provide superi- or results for both ferrous and nonferrous alloys. These concen- trated liquid cleaners -- Houghto-Clean® 8001 and Houghto-Clean® 8011 -- cost- effectively remove inert soils and carbonaceous material from metal surfaces, achieving a com- plete water break-free surface. These cleaners are typically used as the first step in multi-stage, in- line cleaning processes to prepare metal surfaces for manganese phosphating, heavy zinc phos- phating, prepaint phosphating, or plating. Houghto-Clean 8001 and 8011 are soluble, stable, liquid concentrates that contain alka- line, heavy-duty detergents, and emulsifiers that rapidly dissolve most industrial oils, as well as particulate and carbonaceous smut. Houghto-Clean 8001 is for- 60 Metal Finishing
Transcript of Coatings removal
es securely with thumb screws and its hinged side stays upright when open, but closes easily to help reduce vapor emissions. Its large 18-in. lid opening makes filling easy, and its polyethylene construc- tion will not rust or corrode. To aide in waste segregation, the funnel is available in three colors - - black, red, and yellow. Circle 315 on reader service card
COATINGS REMOVAL NitroCision www. nitrocision.com NitroCision has in t roduced NitroJet to the auto manufactur- ing and aeronautics industries as an al ternat ive to water je t tech- nology. The technology uses liquid ni trogen ins tead of water to cut and remove coatings. It cleans as it cuts, then d isappears as it r e tu rns to its original gaseous
state in the earth's atmosphere. It has applications in the machining of exotic mater ia l s and can remove coatings from a variety of subs t ra t e mater ia l s including metal, plastic, ceramic, and fiber- glass. Because ni t rogen is iner t and compatible with most chemi- cals, Ni t roJe t can be used with flammable or explosive materials and those sensitive to moisture. It shares similar capabil i t ies with water je t technology, but because it cuts without the use of pressur- ized water, it does not generate a secondary s tream of waste. Circle 316 on reader service card
H ~ - D ~ SOAK ¢¢FJU~i|S Houghton International Inc. www.houghtonintl.corn Houghton 's In ternat ional ' s Surface Finishing division is offering two heavy-du ty immer-
sion cleaners that provide superi- or resul ts for both ferrous and nonferrous alloys. These concen- t ra ted liquid cleaners - - Houghto-Clean® 8001 and Houghto-Clean® 8011 - - cost- effectively remove inert soils and carbonaceous mater ia l from metal surfaces, achieving a com- plete wa te r break-free surface. These cleaners are typically used as the first step in multi-stage, in- line cleaning processes to prepare meta l surfaces for manganese phosphat ing, heavy zinc phos- phating, prepaint phosphating, or plating. Houghto-Clean 8001 and 8011 are soluble, stable, liquid concentra tes tha t contain alka- line, heavy-duty detergents, and emulsifiers tha t rapidly dissolve most indust r ia l oils, as well as par t icula te and carbonaceous smut. Houghto-Clean 8001 is for-
60 Metal Finishing
![Waterborne Epoxy Based Coating Materials · friendly coatings like powder coatings, solventless coatings, UV curable coatings and waterborne coatings [6]. The first step in this process](https://static.fdocuments.net/doc/165x107/600912c2a8aea319421a2c7d/waterborne-epoxy-based-coating-materials-friendly-coatings-like-powder-coatings.jpg)
