Coating saaaaaaaaaaaaaaaaa

• Coatings • Consulting • Training • Expert Witness • FA • Diagnosis • Design Review • Inspection • Literature Search & Supply + more>>

BSI EN ISO Corrosion Related StandardsStandard Number Standard Title

BS 7545:1991, ISO 8407:1991

Method for removal of corrosion products from corrosion test specimens of metals and alloys

BS EN ISO 4541:1995 Metallic and other non-organic coatings. Corrodkote test (CORR test)

BS EN 3026:1994 Test method for dry film lubricants. Corrosion test on steel specimens

BS EN 3212:1995 Paints and varnishes. Corrosion test by alternate immersion in a buffered sodium chloride solution

BS ISO 11907-2:1995 Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Static method

BS EN 60654-4:1998, IEC 60654-4:1987

Operating conditions for industrial-process measurement and control equipment. Corrosive and erosive influences

BS ISO 11907-4:1998 Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Dynamic decomposition method using a conical radiant heater

BS ISO 11907-3:1998 Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Dynamic decomposition method using a travelling furnace

BS EN ISO 3651-1:1998

Determination of resistance to intergranular corrosion of stainless steels. Austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)

BS EN ISO 3651-2:1998

Determination of resistance to intergranular corrosion of stainless steels. Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in media containing sulfuric acid

BS EN ISO 12944-4:1998

Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Types of surface and surface preparation

BS EN ISO 12944-8:1998

Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Development of specifications for new work and maintenance

BS EN ISO 12944-2:1998

Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Classification of environments

BS EN 10283:1999 Corrosion resistant steel castings

BS EN ISO 9455-15:2000

Soft soldering fluxes. Test methods. Copper corrosion test

BS EN 61701:2000, IEC 61701:1995

Salt mist corrosion testing of photovoltaic (PV) modules

BS EN ISO 10289:2001

Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates. Rating of test specimens and manufactured articles subjected to corrosion tests

BS EN 12508:2000 Corrosion protection of metals and alloys. Surface treatment, metallic and other inorganic coatings. Vocabulary

BS EN 13858:2003 Corrosion protection of metals. Non-electrolytically applied zinc flake coatings on iron or steel components

BS ISO 4524-2:2000 Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Mixed flowing gas (MFG) environmental tests

BS EN 60512-11-6:2002

Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11f. Corrosion, salt mist

BS ISO/TS 12928:1999, ISO/TS 12928:1999

Lubricants, industrial oils and related products (class L). Family R (products for temporary protection against corrosion). Guidelines for establishing specifications

BS EN 4113:2001 Aerospace series. Clamps, loop (P type) in corrosion resisting steel with rubber cushioning. Dimensions and masses

BS EN 12502-5:2004

Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for cast iron, unalloyed and low alloyed steels

BS EN ISO 13402:2001, BS 7891:1997

Surgical and dental hand instruments. Determination of resistance against autoclaving, corrosion and thermal exposure

BS EN 1965-2:2001 Structural adhesives. Corrosion. Determination and classification of corrosion to a brass substrate

BS EN 1965-1:2001 Structural adhesives. Corrosion. Determination and classification of corrosion to a copper substrate

BS EN 60512-11-7:2003

Connectors for electronic equipment. Tests and measurements. Flowing mixed gas corrosion test

BS EN 12501-1:2003 Protection of metallic materials against corrosion. Corrosion likelihood in soil. General

BS EN 12502-1:2004 Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. General

BS EN 12501-2:2003 Protection of metallic materials against corrosion. Corrosion likelihood in soil. Low alloyed and non alloyed ferrous materials

BS EN 12502-2:2004 Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for copper and copper alloys

BS EN 12502-3:2004 Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for hot dip galvanised ferrous materials

BS EN 12502-4:2004 Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for stainless steels

BS EN ISO 22775:2004

Footwear. Test methods for accessories. Metallic accessories. Corrosion resistance

BS EN 60695-5-1:2003

Fire hazard testing. Assessment of potential corrosion damage by fire effluent. General guidance

BS EN 10088-3:2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

BS ISO 11844-2:2005 Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres. Determination of corrosion attack in indoor atmospheres

BS ISO 11844-3:2006 Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres. Measurement of environmental parameters affecting indoor corrosivity

BS ISO 4404-1:2001 Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids. Water-containing fluids

BS EN ISO 7539-7:2005

Corrosion of metals and alloys. Stress corrosion testing. Method for slow strain rate testing

BS EN ISO 4404-2:2003

Petroleum and related products. Determination of the corrosion resistance fire-resistant hydraulic fluids. Non-aqueous fluids

BS EN ISO 10271:2001

Dental metallic materials. Corrosion test methods

BS EN ISO 4623-1:2002, BS 3900-F13:2002

Paints and varnishes. Determination of resistance to filiform corrosion. Steel substrates

BS ISO 11303:2002 Corrosion of metals and alloys. Guidelines for selection of protection methods against atmospheric corrosion

BS M 93:2005 Protection of magnesium-rich alloys against corrosion. Specification

BS ISO 7539-9:2003 Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of pre-cracked specimens for tests under rising load or rising displacement

BS EN ISO 7539-6:2003

Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of pre-cracked specimens for tests under constant load or constant displacement

BS ISO 16701:2003

Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution

BS EN 12472:2005 Method for the simulation of wear and corrosion for the detection of nickel release from coated items

BS EN 14832:2005 Petroleum and related products. Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids

BS EN ISO 4628-10:2003, BS 3900-H10:2003

Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of filiform corrosion

BS EN 14868:2005 Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in closed water circulation systems

BS ISO 16784-1:2006

Corrosion of metals and alloys. Corrosion and fouling in industrial cooling water systems. Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems

BS EN ISO 4623-2:2004, BS 3900-F20:2004

Paints and varnishes. Determination of resistance to filiform corrosion. Aluminium substrates

BS EN 14483-4:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel

BS EN 3841-402:2004 Aerospace series. Circuit breakers. Test methods. Corrosion

BS 2000-112:2005, IP 112:2005

Methods of test for petroleum and its products. Determination of corrosiveness to copper of lubricating grease. Copper strip method

BS EN 2435-001:2006 Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. Minimum requirements

BS ISO 11844-1:2006 Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres. Determination and estimation of indoor corrosivity

PD 6484:1979 Commentary on corrosion at bimetallic contacts and its alleviation

BS 3745:1970 Method for the evaluation of results of accelerated corrosion tests on metallic coatings

BS 6413-8:1988, ISO 6743-8:1987

Lubricants, industrial oils and related products (class L). Classification for family R (temporary protection against corrosion)

BS 5117-0:1992 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). General introduction

BS EN ISO 7441:1995 Corrosion of metals and alloys. Determination of bimetallic corrosion in outdoor exposure corrosion tests

BS EN ISO 8565:1995 Metals and alloys. Atmospheric corrosion testing. General requirements for field tests

BS EN ISO 9400:1996 Nickel-based alloys. Determination of resistance to intergranular corrosion

BS 2000-315:1998, ISO 5662:1997

Methods of test for petroleum and its products. Petroleum products. Electrical insulating oils. Detection of corrosive sulfur

BS EN 12500:2000 Protection of metallic materials against corrosion. Corrosion likelihood in atmospheric environment. Classification, determination and estimation of corrosivity of atmospheric environments

BS 7195:1989 Guide for prevention of corrosion of metals caused by vapours from organic materials

BS EN ISO 7539-2:1995

Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of bent-beam specimens

BS EN ISO 7539-3:1995, U

Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of U-bend specimens

BS EN ISO 7539-5:1995

Corrosion of metals and alloys. Stress corrosion testing. Method for the preparation and use of C-ring specimens

BS EN ISO 7539-4:1995

Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of uniaxially loaded tension specimens

BS EN ISO 7384:1995 Corrosion tests in artificial atmospheres. General requirements

BS EN ISO 14713:1999

Protection against corrosion of iron and steel in structures. Zinc and aluminium coatings. Guidelines

BS EN ISO 7539-1:1995

Corrosion of metals and alloys. Stress corrosion testing. General guidance on testing procedures

BS 4553-3:1998 Specification for 600/1000 V single-phase split concentric electric cables. Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire

BS EN 12487:2000 Corrosion protection of metals. rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys

BS EN 60068-2- Environmental testing. Test methods. Test Ke. Flowing mixed gas

60:1996, IEC 60068-2-60:1995

corrosion test

BS 5466-7:1982, ISO 4542-1981

Methods for corrosion testing of metallic coatings. Guidance on stationary outdoor exposure corrosion tests

BS EN ISO 2160:1998, BS 2000-154:1999, ISO 2160:1998

Petroleum products. Corrosiveness to copper. Copper strip test

BS ISO 11907-1:1998 Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Guidance

BS EN 10088-2:2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

BS EN ISO 10156-2:2005

Gas cylinders. Gases and gas mixtures. Determination of oxidizing ability of toxic and corrosive gases and gas mixtures

BS EN ISO 6251:1998, BS 2000-411:1998, ISO 6251:1996

Liquid petroleum gases. Corrosiveness to copper. Copper strip test

BS ISO 15329:2006 Corrosion of metals and alloys. Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys

BS 4601:1970 Specification for electroplated coatings of nickel plus chromium on plastics materials

BS 5117-2.1:1985 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for corrosion inhibition performance. General procedures

BS 5117-2.5:1985 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for corrosion inhibition performance. Field test

BS EN ISO 6509:1995 Corrosion of metals and alloys. Determination of dezincification resistance of brass

BS ISO 10270:1995 Corrosion of metals and alloys. Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors

BS ISO 11463:1995 Corrosion of metals and alloys. Evaluation of pitting corrosion

BS ISO 11846:1995 Corrosion of metals and alloys. Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys

BS EN 1618:1997 Catheters other than intravascular catheters. Test methods for common properties

BS ISO 11782-1:1998 Corrosion of metal and alloys. Corrosion fatigue testing. Cycles to failure testing

BS ISO 11782-2:1998 Corrosion of metal and alloys. Corrosion fatigue testing. Crack propagation testing using precracked specimens

BS EN ISO 11130:1999

Corrosion of metals and alloys. Alternate immersion test in salt solution

BS ISO 7539-8:2000 Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of specimens to evaluate weldments

BS 6338:1982, ISO 4520-1981

Specification for chromate conversion coatings on electroplated zinc and cadmium coatings

BS EN ISO 8044:2000 Corrosion of metals and alloys. Basic terms and definitions

BS ISO 15324:2000 Corrosion of metals and alloys. Evaluation of stress corrosion

cracking by the drop evaporation test

BS 7211:1998

Electric cables. Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire

BS 6724:1997 Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V, having low emission of smoke and corrosive gases when affected by fire

BS AU 180-6:1982, ISO 6315-1980

Brake linings. Method for assessment of seizure to ferrous mating surface due to corrosion

BS EN ISO 4536:1995 Metallic and non-organic coatings on metallic substrates. Saline droplets corrosion test (SD test)

BS ISO 4404:1998 Petroleum and related products. Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems

BS EN 12329:2000 Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel

BS EN 990:2002 Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure

BS ISO 17864:2005 Corrosion of metals and alloys. Determination of the critical pitting temperature under potentiostatic control

BS ISO 15710:2002 Paints and varnishes. Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution

BS EN 14483-3:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel

BS EN 14483-5:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion in closed systems

BS EN 12373-19:2001 Aluminium and aluminium alloys. Anodizing. Rating system for the evaluation of pitting corrosion. Grid method

BS EN 12373-18:2001 Aluminium and aluminium alloys. Anodizing. Rating system for the evaluation of pitting corrosion. Chart method

BS EN 2436-006:2006 Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing epoxy primer. High corrosion resistance for military application

BS EN 50162:2004 Protection against corrosion by stray current from direct current systems

BS EN ISO 17834:2003

Thermal spraying. Coatings for protection against corrosion and oxidation at elevated temperatures

BS 8436:2004 Electric cables. 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids. Multicore cables

BS ISO 16151:2005 Corrosion of metals and alloys. Accelerated cyclic tests with exposureto acidified salt spray, "dry" and "wet" conditions

BS EN 2435-002:2006 Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion resistance

BS EN 2435-003:2006 Aerospace series. Paints and varnishes. Corrosion resistant chromated

two component cold curing primer. High corrosion and fluid resistance

BS EN 2435-004:2006 Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion and fluid resistance with surface preparation tolerance

BS EN 2436-002:2006 Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. High corrosion resistance

BS 5117-2.2:1985 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for corrosion inhibition performance. Glassware tests

BS 3130-1:1989 Glossary of packaging terms. General (including auxiliary materials)

BS EN ISO 4538:1995 Metallic coatings. Thioacetamide corrosion test (TAA test)

BS 5735:1979, IEC 60426:1973

Test methods for determining electrolytic corrosion with electrical insulating materials

BS EN 2335:1990 Specification for bearings-spherical plain in corrosion resisting steel without assembly slot. Dimensions and loads

BS 5117-2.4:1985 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for corrosion inhibition performance. Static engine test

BS EN ISO 9227:2006 Corrosion tests in artificial atmospheres. Salt spray tests

BS EN 2436-003:2006 Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. High corrosion and fluid resistance

BS EN 2436-004:2006 Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. High corrosion and fluid resistance with surface preparation tolerance

BS ISO 17475:2005 Corrosion of metals and alloys. Electrochemical test methods. Guidelines for conducting potentiostatic and potentiodynamic polarization measurements

BS 7835:2000

Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having low emission of smoke and corrosive gases when affected by fire

BS 5117-2.6:1992 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for corrosion inhibition performance. Test for corrosion of cast aluminium alloys under heat-transfer conditions

BS 6580:1992 Specification for corrosion inhibiting, engine coolant concentrate ('antifreeze')

BS EN 2435-005:2006 Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion resistance for military application

BS EN 12330:2000 Corrosion protection of metals. Electrodeposited coatings of cadmium on iron or steel

BS ISO 5952:2005 Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance

BS EN ISO 9455-12:1994

Soft soldering fluxes. Test methods. Steel tube corrosion test

BS EN ISO 11306:1998

Corrosion of metals and alloys. Guidelines for exposing and evaluating metals and alloys in surface sea water

BS EN 3665:1997 Test methods for paints and varnishes. Filiform corrosion resistance test on aluminium alloys

BS EN 14483-1:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by acids at room temperature

DD CEN/TS 15280:2006

Evaluation of a.c. corrosion likelihood of buried pipelines. Application to cathodically protected pipelines

BS EN 2436-001:2006 Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. Basic requirements

BS 3924:1978 Specification for pressure-sensitive adhesive tapes for electrical insulating purposes

BS 4147:1980 Specification for bitumen-based hot-applied coating materials for protecting iron and steel, including suitable primers where required

BS EN ISO 12944-6:1998

Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Laboratory performance test methods

BS EN 1670:1998 Building hardware. Corrosion resistance. Requirements and test methods

BS EN ISO 4543:1995 Metallic and other non-organic coatings. General rules for corrosion tests applicable for storage conditions

BS EN 2516:1997 Passivation of corrosion resisting steels and decontamination of nickel base alloys

BS EN 61076-3-101:1998, IEC 61076-3-101:1997

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors. Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 x 2,54 mm centre-line

BS EN ISO 12944-1:1998

Paints and varnishes. Corrosion protection of steel structures by protective paint systems. General introduction

BS EN 1403:1998 Corrosion protection of metals. Electrodeposited coatings. Method of specifying general requirements

BS EN 60793-1-33:2002, IEC 60793-1-33:2001

Optical fibres. Measurement methods and test procedures. Stress corrosion susceptibility. Section 33 Stress corrossion susceptibility

BS 3900-F19:2000, ISO 11997-2:2000

Methods of test for paint. Durability tests on paint films. Determination of resistance to cyclic corrosion conditions. Wet (salt fog)/dry/humidity/UV light. Part F19: Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/humidity/UV light

BS 2011-2.2Kd:1984, IEC 60068-2-46:1982

Environmental testing. Guidance. Test Kd. Guidance on Test Kd: Hydrogen sulphide test for contacts and connections

DD ENV 12837:2000 Paints and varnishes. Qualification of inspectors for corrosion protection of steel structures by protective paint systems

DD ENV ISO 8502-1:2001

Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field test for soluble iron corrosion products

BS EN 60512-11-14:2003

Connectors for electronic equipment. Tests and measurements. Climatic tests. Flowing single gas corrosion test

BS EN 14483-2:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours

BS EN 4590:2005 Aerospace series. Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated

BS EN ISO 10062:1995

Corrosion test in artificial atmospheres at very low concentrations of polluting gas(es)

BS ISO 11997-1:2005, BS 3900-F18:2005

Paints and varnishes. Determination of resistance to cyclic corrosion conditions. Wet (salt fog)/dry/humidity

BS EN 2436-005:2006 Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. For exterior use with surface preparation tolerance

DD ENV 12923-1:1998

Advanced technical ceramics. Monolithic ceramics. General practice for undertaking corrosion tests

BS 5493:1977 Code of practice for protective coating of iron and steel structures against corrosion

BS 2569-2:1965 Specification for sprayed metal coatings. Protection of iron and steel against corrosion and oxidation at elevated temperatures

BS 5117-1.1:1985 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for determination of physical and chemical properties. Ancillary procedures

BS 5117-1.2:1985 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for determination of physical and chemical properties. Determination of boiling point

BS 5117-1.3:1985 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for determination of physical and chemical properties. Determination of freezing point

BS 5117-1.4:1985 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for determination of physical and chemical properties. Determination of foaming characteristics

BS M 58:1986, ISO 8080-1985

Specification for anodic coating of titanium and titanium alloys by the sulphuric acid process

BS 1683:1987 Specification for coated aluminium foil for wrapping processed cheese

BS AU 194:1984 Specification for performance of electrical connections between towing vehicles and trailers

BS EN 12540:2000 Corrosion protection of metals. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium

BS EN 846-13:2001 Methods of test for ancillary components for masonry. Determination of resistance to impact, abrasion and corrosion of organic coatings

BS EN ISO 4628-8:2005, BS 3900-H8:2005

Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of delamination and corrosion around a scribe

BS EN ISO 12944-5:1998

Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Protective paint systems

BS EN ISO 12944-3:1998

Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Design considerations

BS ISO 16428:2005 Implants for surgery. Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices

BS 873-1:1983 Road traffic signs and internally illuminated bollards. Methods of test BS EN ISO 12944-7:1998

Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Execution and supervision of paintwork

BS EN 14879-1:2005 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Terminology, design and preparation of substrate

BS 5117-1.5:1992 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for determination of physical and chemical properties. Coolant hard water stability test

BS EN 10025-5:2004 Hot rolled products of structual steels. Technical delivery conditons for structural steels with improved atmospheric corrosion resistance

BS 7870-2:1999 LV and MV polymeric insulated cables for use by distribution and generation utilities. Methods of test

BS 7655-6.1:1997

Specification for insulating and sheathing materials for cables. Thermoplastic sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fire. General application thermoplastic types

BS 3146-2:1975 Specification for investment castings in metal. Corrosion and heat resisting steels, nickel and cobalt base alloys

BS EN 12068:1999 Cathodic protection. External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection. Tapes and shrinkable materials

93/201088 DC prEN 50114. Materials and size requirements for earth electrodes from the corrosion point of view

93/704327 DC Aerospace series. Aluminium alloy AL-P2024-T351. Sheet and strip. 0,8 mm≤a≤6 mm (prEN 3999)

93/706720 DC Aerospace series. Vacuum deposition of cadmium (prEN 2535) 93/706752 DC Aerospace series. Aluminium alloy AL-P7475-T7351, plate, 6 mm

93/714443 DC Aerospace series. Aluminium alloy AL-P7075-T73. Die forgings a ≤ 125 mm (prEN 3880)

93/714444 DC Aerospace series. Aluminium alloy AL-P7075-T73. Hand forgings a ≤ 125 mm (prEN 3881)

93/717455 DC Aerospace series. Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated. Classification: 490 MPa (at ambient temperature)/425°C (prEN 4076)

93/717456 DC Aerospace series. Screws, normal hexagon head, threaded to head, in heat and corrosion resisting steel, passivated. Classification: 900 MPa (at ambient temperature)/650°C (prEN 4077)

95/702085 DC Petroleum and natural gas industries. Bolted bonnet steel gate valves for refinery and related applications. Basic requirements (ISO/DIS 10434)

95/715398 DC

Aerospace series. Metallic materials. Rules for drafting and presentation of test method standards. Part 7. Specific requirements for corrosion and stress-corrosion test method standard. (prEN 4261-7)

96/205308 DC prEN 50245. Plugs and socket-outlets 16A 250V a.c. for household and similar purposes general requirements and dimensions variant 1 (3P + 2P)

96/205310 DC prEN 50246. Plugs and socket-outlets 16A 250 V a.c. for household and similar purposes. Conversion adapters

96/709571 DC Steel tubes and fittings for on and offshore pipelines. External three layer extruded polypropylene based coatings (prEN 10286)

96/709572 DC Steel tubes and fittings for on and offshore pipelines. External fused polyethylene based coatings (prEN 10287)

96/713159 DC Corrosion of metals and alloys. Guidelines for applying statistics to analysis corrosion data (ISO/DIS 14802)

97/700600 DC Aerospace series. Electroless nickel plating of corrosion resistance steel (prEN 3839)

97/703738 DC Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. Part 3. High corrosion and fluid resistance (prEN 4405-003)

97/703737 DC Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. Part 2. High corrosion resistance (prEN 4405-002)

97/703739 DC Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. Part 4. High corrosion and fluid resistance with surface tolerance (prEN 4405-004)

97/703736 DC Aerospace series. Paints and varnishes. Corrosion resistant chromate. Free two component cold curing primer. Part 1. Minimum requirements (prEN 4405-001)

97/104479 DC prEN 12897. Water supply. Specification for indirectly heated unvented (closed) hot water storage systems

97/208495 DC IEC 61640. HV gas-insulated transmission lines for rated voltages of 72,5 kV and above (IEC Document 17C/200/CDV)

97/717144 DC ISO/DIS 9216. Aerospace. Nuts, hexagonal, slotted (castellated), for pulleys, in cadmium plated steel and corrosion resisting steel

97/717145 DC ISO/DIS 9217. Aerospace. Washers, chamfered, with counterbore, for pulleys, in alloy steel and corrosion resisting steel. Dimensions and masses

97/717146 DC ISO/DIS 9218. Aerospace. Washers, flat, for pulleys, in alloy steel and corrosion resisting steel. Dimensions and masses

97/719219 DC Aerospace series. Aluminium alloy AL-P2014A-T3. Drawn tube for structural applications. 0,6 mm ≤ a ≤ 12,5 mm (prEN 3346)

97/719245 DC Aerospace series. Aluminium alloy AL-P7050-T74. Die forgings. a ≤ 150 mm (prEN 2688)

97/719244 DC Aerospace series. Aluminium alloy AL-P7010-T7451. Hand forgings. a ≤ 150 mm (prEN 2686)


97/719242 DC Aerospace series. Alluminium alloy AL-P7010-T7452. Hand and die forgings. a ≤ 150 mm (prEN 2682)


97/719257 DC Aerospace series. Aluminium AL-P7175-T7354. Die forgings. a ≤ 150 mm (prEN 4294)

97/719256 DC Aerospace series. Aluminium AL-P7175-T73511. Extruded bar and section. a or D ≤ 150 mm (prEN 4293)

97/719252 DC Aerospace series. Aluminium alloy AL-P2219-T851. Forgings. a ≤ 400 mm (prEN 4285)

97/719248 DC Aerospace series. Aluminium AL-P7175-T7352. Hand and die

forgings. a ≤ 150 mm (prEN 4278)

97/719247 DC Aerospace series. Aluminium AL-P7175-T73. Hand and die forgings. a ≤ 125 mm (prEN 4277)

97/719246 DC Aerospace series. Aluminium AL-P7175-T7351. Hand forgings. a ≤ 150 mm (prEN 4276)

97/109272 DC prEN 13063. Chimneys. System chimneys with clay/ceramic flue liners or blocks

98/700452 DC Aerospace series. Aluminium alloy AL-P7050-T7452. Die forgings a ≤ 150 mm (prEN 4448)

98/705334 DC Method for electrochemical potentiokinetic reactivation test (based on Cihal's method) (ISO/CD 12732)

98/201910 DC prEN 50297. Photoelectric control units for road and street lighting

98/103952 DC BS EN 12209-3. Building hardware. Locks and latches. Part 3. Electromechanically operated locks and striking plates. Requirements and test methods (prEN 12209-3:1998)

98/710176 DC Aerospace series. Paints and varnishes. Corrosion preventive two component cold curing coating for integral fuel tanks with medium fuel temperature (prEN 4451)

98/710177 DC Aerospace series. Paints and varnishes. Corrosion preventive two component cold curing coating for integral tanks with high fuel temperature (prEN 4452)

98/712176 DC Aerospace series. Aluminium alloy SL-P7475-T7351. Plate 6 mm ≤ a ≤ 100 mm (prEN 4457)

98/712171 DC Aerospace series. Aluminium alloy AL-P7010-T76. Die forgings. a ≤ 200 mm (prEN 3339)

98/712165 DC Aerospace series. Aluminium alloy AL-P7050-T7452 Hand forgings A ≤ 200 mm. (prEN 2690)

98/711596 DC Steel tubes and fittings for onshore and offshore pipelines. External coatings by bitumen or coal tar derived materials (prEN 10300)

98/713242 DC Aerospace series. Aluminium and aluminium alloy wrought products. Technical specification. Part 1. Plate (prEN 4400-1)

98/713306 DC

Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification:1100 MPa (at ambient temperature)/425°C (prEN 3052)

98/716951 DC Aerospace series. Studs, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel. Strength class. 1100 MPa (at ambient temperature) (prEN 4421)

00/711012 DC prEN 2284. Aerospace series. Sulfuric acid anodising of Aluminium and wrought aluminium alloys

00/711011 DC prEN 2101. Aerospace series. Chromic acid anodising of aluminium and wrought aluminium alloys

05/19974131 DC

BS EN 480-14. Admixtures for concrete, mortar and grout. Test methods. Part 14. Measurement of corrosion susceptibility of reinforcing steel in concrete. Potentiostatic electrochemical test method

01/208798 DC IEC 60695-5-3 TS. Fire hazard testing. Part 5-3. Corrosion damage effects of fire effluent. Leakage current and metal loss test method

99/716256 DC prEN 4405-06. Aerospace series. Paints and varnishes. Corrosion resistant chromate free two component cold during primer. Part 6.

High corrosion resistance for military application

99/714426 DC prEN 3106. Aerospace series. Sealants. Test methods. Determination of loss of mass and flexibility after fluid immersion

99/710287 DC prEN 3105. Aerospace series. Sealants. Test methods. Determination of the corrosive effect of sealants on metallic materials

99/705627 DC EN 10309. Steel tubes and fittings for onshore and offshore pipelines. External epoxy powder coating

91/81094 DC Aerospace series. Molybdenum disulphide dry lubricants to be applied as a film. Technical specification (prEN 3021)

88/72193 DC Aerospace series. Aluminium alloy sheet, strip, drawn and extruded sections and tubes (prENs 2092, 2124, 2126, 2128, 2317, 2319, 2320, 2393, 2419, 2640, 2655, 2703, 2704 and 2705)

04/19993251 DC Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties

90/72764 DC Aerospace series. Vulcanised rubbers. Tests on the susceptibility to corrosion of metals in contact with vulcanised rubbers in a damp atmosphere (prEN 2899)

99/710367 DC IEC 4/156/CD. Hydraulic machines. Cavitation pitting evaluation in hydraulic turbines, storage pump and pump-turbines

99/710299 DC prEN 4483. Aerospace. Sealing compounds, two-component polysulphide polymer base suitable for brush application for temperatures from -55°C to 95°C corrosion inhibiting. Properties

99/710300 DC

prEN 4484. Aerospace. Sealing compounds, two-component polysulphide polymer base suitable for blow gun or spatula application for temperatures from -55°C to 95°C corrosion inhibiting. Properties

99/710301 DC

prEN 4485. Aerospace. Sealing compounds, two-component polysulphide polymer base suitable for blow gun spatula or roll application for temperatures from -55°C to 95°C corrosion inhibiting. Properties

00/704670 DC ECSS-Q-70-37. Space product assurance. Determination of the susceptibility of metals to stress. Corrosion cracking

00/714923 DC prEN 10025-5. Hot rolled products of structural steels. Part 5. Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

00/244337 DC Electrochemical re-alkalisation and chloride extraction treatments for reinforced concrete. Part 1. Re-alkalisation CENELEC Document prEN 14038-1

06/30036109 DC BS 8442. Miscellaneous road traffic signs and devices. Requirements and test methods

00/124820 DC Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Measurement and acceptance criteria for the dry film thickness

01/122232 DC BS ISO 20340. Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Performance requirements for protective paint systems for off-shore and related structures

04/30057302 DC BS EN ISO 9333. Dental brazing materials

05/30076043 DC IEC 60454-2. Pressure sensitive adhesive tapes for e lectrical purposes. Part 2. Methods of test

04/30078970 DC ISO 22088-1. Plastics. Determination of resistance to environmental

stress cracking (ESC). Part 1. General guidance

04/30078973 DC ISO 22088-2. Plastics. Determination of resistance to environmental stress cracking (ESC). Part 2. Constant tensile stress method

02/206714 DC IEC 60695-5-3. Ed.1. Fire hazard testing. Part 5-3: Corrosion damage effects of fire effluent. Leakage current and metal loss test method

02/209094 DC IEC 60335-2-XXX. Household and similar electrical appliances. Safety. Part 2-XXX: Particular requirements for commercial microwave appliances with insertion or contacting applicators

02/713774 DC EN 10336. Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming. Technical delivery conditions

03/301401 DC EN 14611. Space product assurance. Determination of the susceptibility of silver plated copper wire and cable to “red-plague” corrosion

06/30089837 DC ISO 7866. Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design, construction and testing

03/302291 DC EN 14629. Products and systems for the protection and repair of concrete structures. Test Methods. Determination of Chloride content in hardened concrete

03/314809 DC EN ISO 13680. Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock. Technical delivery conditions

03/305240 DC BS ISO 16429. Implants for surgery. Long-term measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices

06/30094368 DC BS 4592-5. Industrial type flooring and stair treads. Part 5. Solidplate s in metal and glass reinforced plastics (GRP). Specification

06/30099306 DC BS ISO 5832-9. Implants for surgery. Metallic materials. Part 9. Wrought high nitrogen stainless steel

05/30101483 DC ISO 11486. Motorcycles. Methods for setting running resistance on a chassis dynamometer

03/317246 DC ISO 2081. Metallic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel

06/30103169 DC EN 12094-7. Fixed firefighting systems. Components for gas extinguishing systems. Part 7. Requirements and test methods for nozzles

06/30106554 DC ISO 17872. Paints and varnishes. Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion

04/300071 DC IEC 61300-2-26-A1 ED 1.0. Basic test and measurement procedures. Part 2-26. Tests. Salt mist

04/30107372 DC BS EN 12183. Manual wheelchairs. Requirements and test methods

04/30107378 DC EN 12184. Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods

04/30109201 DC EN 14879-2. Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Part 2. Coatings on metallic components

04/30109383 DC ISO 8535-1. Compression-ignition engines. Steel tubes for high-pressure fuel injection pipes. Part 1. Requirements for seamless cold-drawn single-wall tubes

04/30110594 DC ISO 12732. Corrosion of metals and alloys. Method for

electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)

06/30110658 DC EN ISO 3630-1. Dentistry. Root canal instruments. Part 1. General requirements and test methods

04/30112507 DC ISO 7169. Aerospace. Separable tube fittings for fluid systems, for 24 cones, for pressures up to 3000 psi or 21 kPa. Procurement specification inch/metric

06/30112897 DC EN 1670. Building hardware. Corrosion resistance. Requirements and test methods

04/30114371 DC EN 10339. Steel tubes for onshore and offshore water pipelines. Internal liquid applied epoxy linings for corrosion protection

04/30116142 DC ISO 4952. Structural steels with improved atmospheric corrosion resistance

04/30123574 DC EN 14879-3. Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Part 3. Coatings on concrete components

04/30124042 DC IEC 61300-2-26. Basic test and measurement procedures. Part 2-26. Tests. Salt mist

04/30124417 DC EN 15081. Industrial valves. Mounting kits for part-turn valve actuator attachment

04/30125076 DC EN 10111. Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions

04/30125747 DC IEC 60439-5 Ed.2. Low-voltage switchgear and controlgear assemblies. Part 5. Particular requirements for assemblies for power distribution in public networks

04/30125773 DC EN 12923-1. Advanced technical ceramics. Monolithic ceramics. Part 1. General practice for undertaking corrosion tests

04/30125823 DC ISO 17092. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions

05/30126202 DC EN 10088-4. Stainless steels. Part 4. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes

05/30126205 DC EN 10088-5. Stainless steels. Part 5. Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels

04/30126837 DC BS ISO 6336-1. Calculation of load capacity of spur and helical gears. Part 1. Basic principles, introduction and general influence factors

05/30127517 DC IEC 60454-3-11 ED 2. Pressure-sentive adhesive tapes for electrical purposes. Part 3. Specifications for individual materials

05/30129388 DC ISO 21610. Corrosion of metals and alloys. Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels

05/30131064 DC EN 15189:2005. Ductile iron pipes, fittings and accessories. External polyurethane coating for pipes. Requirements and test methods

05/30131376 DC BS EN 15183. Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test

05/30131382 DC BS EN 15184. Products and systems for the protection and repair of concrete structures. Test methods. Shear adhesion coated steel to concrete (pull-out test)

05/30131477 DC ISO 17752. Corrosion of metals and alloys. Procedure to determine runoff rates of metals from materials as a result of atmospheric corrosion

05/30131749 DC EN 15205. Determination of hexavalent chromium in corrosion protection layers. Qualitative analysis

05/30134748 DC ISO 14521. Gears. Calculation of load capacity of wormgears

05/30135048 DC EN 15257. Cathodic protection. Competence levels and certification of cathodic protection personnel

05/30135633 DC IEC 60269-1 ED 4. Low-voltage fuses. Part 1. General requirements

05/30135642 DC

IEC 60269-2 ED 3. Low-voltage fuses. Part 2. Supplementary requirements for fuses for use by authorised persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to I

05/30135649 DC IEC 60269-4 ED 4. Low-voltage fuses. Part 4. Supplementary requirements for fuse-links for the protection of semiconductor devices

05/30136157 DC IEC 60426 ED 2. Test methods for determining electrolytic corrosion with insuating materials

05/30138201 DC ISO 12696. Cathodic protection of steel in concrete

05/30138231 DC ISO 8407. Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens

05/30138471 DC

EN ISO 16276-2. Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a dry film. Part 2. Cross-cut testing and X-cut testing

05/30139247 DC EN 14879-5. Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Part 5. Linings on concrete components

05/30139250 DC EN 14879-4. Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Part 4. Linings on metallic components

05/30139335 DC EN 12487. Corrosion protection of metals. Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys

05/30139444 DC ISO 7539-1. Corrosion of metals and alloys. Stress corrosion testing. Part 1. Guide to testing procedures

05/30139447 DC ISO 21601. Guidelines for assessing the significance of stress corrosion cracks detected in service

05/30140324 DC EN ISO 12944-5. Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 5. Protective paint systems

05/30140928 DC EN 15631. Determination of the influence of the corrosion protection on the anchorage capacity of the transverse anchorage bars

05/30140937 DC ISO 10414-1. Petroleum and natural gas industries. Field testing of drilling fluids. Part 1. Water-based fluids

06/30145214 DC EN 671-1. Fixed firefighting systems. Hose systems. Part 1. Hose reels with semi-rigid hose

06/30145217 DC EN 671-2. Fixed firefighting systems. Hose systems. Part 2. Hose system with lay-flat hose

06/30146267 DC ISO 11154. Road vehicles. Roof load carriers

06/30146724 DC EN 10277-1. Bright steel products. Technical delivery conditions. Part 1. General

06/30149361 DC ISO 13704. Petroleum, petrochemical and natural gas industries. Calculation of heater-tube thickness in petroleum refineries

06/30149450 DC EN 1866-1. Mobile fire extinguishers. Part 1. Characteristics, performance and test methods

06/30149994 DC EN ISO 12944-6. Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 6. Laboratory performance test methods

06/30151472 DC BS EN 4534-2. Aerospace series. Bushes, plain in aluminium alloy with self-lubricating liner, elevated load. Part 2. Dimensions and loads. Inch series

06/30151475 DC BS EN 4535-2. Aerospace series. Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load. Part 2. Dimensions and loads. Inch series

06/30151478 DC BS EN 4536-2. Aerospace series. Bushes, plain in corrosion-resisting steel with selliner, elevated load. Part 2. Dimensions and loads. Inch series

06/30151481 DC BS EN 4537-2. Aerospace series. Bushes, flanged in corrosion-resisting steel with sliner, elevated load. Part 2. Dimensions and loads. Inch series

06/30151546 DC BS EN 4613. Aerospace series. Spherical plain bearings in corrosion resisting steel with self lubricating liner, narrow series. Dimensions and loads. Inch series

06/30151549 DC BS EN 4614. Aerospace series. Spherical plain bearings in corrosion resisting steel with self lubricating liner, wide series. Dimensions and loads. Inch series

06/30152560 DC BS IEC 60603-7. Connectors for electronic equipment. Part 7. Detail specification for 8-way, unshielded, free and fixed connectors

06/30155368 DC EN 14879-6. Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Part 6. Combined linings with tile and brick layers

06/30155632 DC EN 13260. Railway applications. Wheelsets and bogies. Wheelsets. Products requirements

06/30155635 DC EN 13261. Railway applications. Wheelsets and bogies. Axles. Product requirements

BS 5680:1979, ISO 5662-1978

Method for detection of corrosive sulphur in petroleum-based electrical insulating oils

BS 5903:1980 Method for determination of resistance to intergranular corrosion of austenitic stainless steels: copper sulphate-sulphuric acid method (Moneypenny Strauss test)

BS 6682:1986, ISO 7441-1984

Method for the determination of bimetallic corrosion in outdoor exposure corrosion tests

BS 1723-3:1988 Brazing. Methods for non-destructive and destructive testing

BS 6161-17:1990, ISO 8994:1989

Methods of test for anodic oxidation coatings on aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Grid method

BS 6161-16:1990, ISO 8993:1989

Methods of test for anodic oxidation coatings on aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method

BS EN ISO 7539-7:1995

Corrosion of metals and alloys. Stress corrosion testing. Slow strain rate testing

BS 2000-112:1993 Methods of test for petroleum and its products. Determination of corrosiveness to copper of lubricating grease. Copper strip method

BS EN ISO 6251:1995, BS 2000:Part 411:1995, ISO 6251:1982

Liquefied petroleum gases. Corrosiveness to copper. Copper strip test

BS 7835:1996

Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3800/6600 V up to 19 000/33 000 V having low emission of smoke and corrosive gases when affected by fire

DD ENV 1965-2:1996 Structural adhesives. Corrosion. Determination and classification of corrosion to a brass substrate

BS 6917:1987, ISO 7384:1986

Method for corrosion testing in artificial atmospheres: general principles

BS 6918:1990, ISO 8044:1989

Glossary of terms for corrosion of metals and alloys

BS EN ISO 7539-6:1995

Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of pre-cracked specimens

BS EN ISO 2160:1995, BS 2000:Part 154:1995, ISO 2160:1985

Petroleum products. Corrosiveness to copper. Copper strip test

BS EN 12472:1999 Method for the simulation of wear and corrosion for the detection of nickel release from coated items

BS 6580:1985 Specification for corrosion inhibiting, engine coolant concentrate ('antifreeze')

BS 6918:1987, ISO 8044-1986

Glossary of terms for corrosion of metals and alloys

BS 6924:1988, ISO 6251-1982

Method for determination of corrosiveness of liquefied petroleum gases to copper

BS 7479:1991, ISO 9227:1990

Method for salt spray corrosion tests in artificial atmospheres

BS 4959:1974 Recommendations for corrosion and scale prevention in engine cooling water systems

BS 5117:Part 0:1985 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). General introduction

BS 2011-2.1Kc:1991 Environmental testing. Tests. Test Kc and guidance. Sulphur dioxide test for contacts and connections

BS 1391:1952 Specification for performance tests for protective schemes used in the protection of light-gauge steel and wrought iron against corrosion

BS 6121-3:1990 Mechanical cable glands. Specification for special corrosion resistant glands

BS 5117:Part 2:Section 2.3:1985

Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for corrosion inhibition performance. Recirculating rig test

DD 24:1973 Recommendations for methods of protection against corrosion on light section steel used in building

BS 6076:1981 Specification for tubular polyethylene film for use as protective sleeving for buried iron pipes and fittings

BS 3900:Part F12:1985, ISO 7253-1984

Methods of test for paint. Durability tests on paint films. Determination of resistance to neutral salt spray

BS EN ISO 4623:1995, BS 3900-F13:1986

Paints and varnishes. Filiform corrosion test on steel

BS 6724:1990 Specification for armoured cables for electricity supply having thermosetting insulation with low emission of smoke and corrosive gases when affected by fire

BS 7211:1994 Specification for thermosetting insulated cables (non-armoured) for electric power and lighting with low emission of smoke and corrosive gases when affected by fire

BS 903:Part A37:1979 Physical testing of rubber. Assessment of adhesion to and corrosion of metals

BS EN ISO 8403:1995 Metallic coatings. Coatings anodic to the substrate. Rating of test specimens subjected to corrosion tests

BS 6724:1986 Specification for armoured cables for electricity supply having thermosetting insulation with low emission of smoke and corrosive gases when affected by fire

BS 7211:1989 Specification for thermosetting insulated cables (non-armoured) for electric power and lighting with low emission of smoke and corrosive gases when affected by fire

BS 2000-112:2002 Methods of test for petroleum and its products. Determination of corrosiveness to copper of lubricating grease. Copper strip method

BS 2000:Part 154:1993 Methods of test for petroleum and its products. Petroleum products. Corrosiveness to copper. Copper strip test

BS 2000:Part 112:1982 Methods of test for petroleum and its products. Corrosive substances in grease (copper strip test)

BS AU 148-10:1969 Methods of test for motor vehicle paints. Resistance to heat and corrosion

PD 6583:1993, ISO TR 10271:1993

Dentistry. Information on methods available for the determination of tarnish and corrosion of metals and alloys

DD ENV 1965-1:1996 Structural adhesives. Corrosion. Determination and classification of corrosion to a copper substrate

BS EN 1303:1998 Building hardware. Cylinders for locks. Requirements and test methods

BS EN ISO 1462:1995 Metallic coatings. Coatings other than those anodic to the basis metal. Accelerated corrosion tests. Method for the evaluation of results

BS EN 3-5:1996 Portable fire extinguishers. Specification and supplementary tests PD 6466:1976 Sulphur dioxide (SO) corrosion test cabinet

BS 5593:1978 Specification for impregnated paper-insulated cables with aluminium sheath/neutral conductor and three shaped solid aluminium phase conductors (CONSAC), 600/1000 V, for electricity supply

BS 6161-4:1981, ISO 2932:1981

Methods of test for anodic oxidation coatings on aluminium and its alloys. Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution

BS 3313-2:1968 Specification for aluminium capping foil and strip for dairy product containers. Aluminium capping foil for skirted closures for plastics containers

BS 4487:1969 Specification for inhibited 1,1,1-trichloroethane (methylchloroform)

BS 2000:Part 154:1982 Methods of test for petroleum and its products. Detection of copper corrosion from petroleum products by the copper strip tarnish test

BS 3761:1970 Specification for non-flammable solvent-based paint remover

BS 5117:1974 Methods of test for corrosion inhibition performance of antifreeze solutions

BS 2011-2.1Ka:1982, IEC 60068-2-11:1981

Environmental testing. Tests. Test Ka.Salt mist

BS 2516:1954 Specification for tail lights for vehicles, including cycles BS 3107:1973 Specification for small incinerators

BS 5720:1979 Code of practice for mechanical ventilation and air conditioning in buildings

BS 1619-1:1962 Re-usable hypodermic syringes for insulin injection. Specification for syringes for use with insulin of strengths 20, 40 and 80 units per millilitre

BS AU 148-11:1969 Methods of test for motor vehicle paints. Resistance to blistering

BS AU 148-13:1969 Methods of test for motor vehicle paints. Resistance to deterioration by contact with other materials

BS AU 148-14:1969 Methods of test for motor vehicle paints. Resistance to outdoor exposure

BS AU 183:1983 Specification for passive seat belt systems

BS AU 186a:1983 Specification for carry cot restraints

BS 2455:Part 1:1973 Sampling and examining deposits from boilers and associated industrial plant. Water-side deposits

BS 2455:Part 2:1983 Sampling and examining deposits from boilers and associated industrial plant. Methods for sampling and examining fire-side deposits

BS 4839-1:1972 Plastics containers. Containers up to 5 litres capacity

BS 4839-2:1974 Plastics containers. Containers over 5 litres and up to 60 litres capacity

BS S 528:1970 Specification for 23/14 chromium-nickel heat-resisting steel sheet and strip (titanium stabilized: 54 hbar) (elevated temperature properties not verified)

BS S 529:1970 Specification for 23/14 chromium-nickel heat-resisting steel sheet and strip (niobium stabilized: 54 hbar) (elevated temperature properties not verified)

BS S 531:1970 Specification for 24/17 chromium-nickel heat-resisting steel sheet and strip (niobium stabilized: 54 hbar) (elevated temperature properties not verified)

BS 8010-2.4:1988 Code of practice for pipelines. Pipelines on land: design, construction and installation. Prestressed concreted pressure pipelines

BS 3254-1:1988 Seat belt assemblies for road vehicles. Specification for restraining devices for adults

BS 8010-2.3:1988 Code of practice for pipelines. Pipelines on land: design, construction and installation. Asbestos cement

BS 1133-6.2:1991 Packaging code. Protection of metal surfaces against corrosion during transport and storage. Temporary protectives and their application

BS 1683:1967 Specification for coated aluminium foil for wrapping processed cheese

BS 1133-6.1:1991 Packaging code. Protection of metal surfaces against corrosion during transport and storage. Cleaning and drying of metal surfaces

BS 7541:1992 Specification for temporary protectives for the protection of metal surfaces against corrosion during transport and storage

BS 7673:1993 Specification for domestic gas cooker oven control valves with or without manual override

BS EN 60249-1:1993, IEC 60249-1:1982

Base materials for printed circuits. Base materials for printed circuits. Test methods

BS 3254-2:1991 Seat belt assemblies for road vehicles. Specification for restraining devices for children

BS AU 202b:1995 Specification for rearward-facing restraint systems for infants, for use in road vehicles

BS EN 60249-2-19:1993, IEC 60249-2-19:1992

Specifications. Specification No. 19. Thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards

BS 611:Part 1:1978 Petri dishes. Specification for glass Petri dishes

BS 1348:1970 Specification for kitchen measuring spoons, measures and jugs

BS 2579:1955 Specification for solid drawn copper alloy tubes for the manufacture of screwed ferrules, and copper alloy screwed ferrules for condenser, evaporator, heater and cooler tubes

BS 2983:1958 Specification for hypodermic dental needles

BS 3456:Part A:Section A1:1966

Specification for safety of household and similar electrical appliances. Heating and cooking appliances. General requirements

BS 3634:1963 Specification for black bitumen oil varnish

BS EN 60691:1996 Thermal links. Requirements and application guide

BS EN ISO 4540:1995 Metallic coatings. Coatings cathodic to the substrate. Rating of electroplated test specimens subjected to corrosion tests

BS 953:1979 Methods of test for safety and protective footwear

BS EN 10155:1993 Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions

BS 709:1983 Methods of destructive testing fusion welded joints and weld metal in steel

BS 1840:1960 Specification for steel columns for street lighting BS 2515:1954 Specification for reflex reflectors for vehicles, including cycles BS 2486:1978 Recommendations for treatment of water for land boilers BS EN 60695-5-1:1993

Fire hazard testing. Assessment of potential corrosion damage by fire effluent. General guidance

BS 2011:Part 2.1Kc:1977

Environmental testing. Tests. Test Kc. Sulphur dioxide test for contacts and connections

BS 3130:Part 1:1973 Glossary of packaging terms. General

BS 4292:1968 Specification for electroplated coatings of gold and gold alloy BS 1224:1970 Specification for electroplated coatings of nickel and chromium BS 3657:1963 Specification for blue-black writing inks

BS 3740:1964 Specification for steel plate clad with corrosion-resisting steel BS 5124:1975 Specification for plastic crates to hold 20 one pint milk bottles BS 5362:1976 Specification for rolling bearing greases

BS 5365:Part 1:1976, ISO 3137-1974

Methods of sampling and test for anhydrous hydrogen fluoride for industrial use. Sampling

BS 5365:Part 2:1976, ISO 3138-1974

Methods of sampling and test for anhydrous hydrogen fluoride for industrial use. Determination of non-volatile acid content: titrimetric method

BS 5365:Part 5:1979, ISO 3702-1976

Methods of sampling and test for anhydrous hydrogen fluoride for industrial use. Determination of sulphur dioxide content

DD ENV 13797:2001 Corrosion protection. Carbon and low alloy steels for use in hydrogen sulfide containing environments in oil and gas production. Materials and test methods. Guidelines

BS 2011-2.1Kd:1977, IEC 60068-2-43:1976

Environmental testing. Tests. Test Kd. Hydrogen sulphide test for contacts and connections

BS 5466:Part 1:1977, ISO 3768-1976

Methods for corrosion testing of metallic coatings. Neutral salt spray test (NSS test)

BS EN 990:1996 Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure

BS EN 60512-11-7:1997, IEC 60512-11-7:1996

Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11g. Flowing mixed gas corrosion test

BS 534:1981 Specification for steel pipes and specials for water and sewage BS 1615:1972 Specification for anodic oxidation coatings on aluminium

BS 7352:1990 Specification for strength and durability performance of metal hinges for side hanging applications and dimensional requirements for template drilled hinges

BS ISO 13806:1999 Vitreous and porcelain enamels. Corrosion tests in closed systems

BS 3100:1976 Specification for steel castings for general engineering purposes

BS 2569:Part 1:1964 Specification for sprayed metal coatings. Protection of iron and steel by aluminium and zinc against atmospheric corrosion

BS 5466:Part 3:1977, ISO 3770-1976

Methods for corrosion testing of metallic coatings. Copper-accelerated acetic acid salt spray test (CASS test)

BS 148:1972 Specification for insulating oil for transformers and switchgear

BS 5466:Part 2:1977, ISO 3769-1976

Methods for corrosion testing of metallic coatings. Acetic acid salt spray test (ASS test)

CP 2010:Part 3:1972 Pipelines. Design and construction of iron pipelines in land

BS 4110:1979 Specification for eye-protectors for vehicle users

BS 903:Part A37:1987 Physical testing of rubber. Determination of adhesion to and corrosion of metals

BS 7846:1996 Specification for 600/1000 V armoured fire-resistant electric cables having low emission of smoke and corrosive gases when affected by

fire

BS EN 60512-11-14:1997, IEC 60512-11-14:1996

Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11p. Flowing single gas corrosion test

BS 1133:Section 6:1966

Packaging code. Temporary protection of metal surfaces against corrosion (during transport and storage)

BS 1504:1976 Specification for steel castings for pressure purposes BS 5977-2:1983 Lintels. Specification for prefabricated lintels

BS 5365:Part 3:1979, ISO 3699-1976

Methods of sampling and test for anhydrous hydrogen fluoride for industrial use. Determination of water content (Karl Fischer method)

BS 3900:Part G5:1976 Methods of test for paints. Environmental tests on paint films (including tests for resistance to corrosion and chemicals). Determination of resistance to liquids

BS 5365:Part 6:1981, ISO 3700-1980

Methods of sampling and test for anhydrous hydrogen fluoride for industrial use. Determination of water content (conductimetric method)

BS 6469-5.1:1992, IEC 60811-5-1:1990

Insulating and sheathing materials of electric cables. Methods of test specific to filling compounds. Drop-point. Separation of oil. Lower temperature brittleness. Total acid number. Absence of corrosive components. Permittivity at 23°C. D.C. resistivity at 23°C and 100°C

BS 3900-F18:1998, ISO 11997-1:1998

Methods of test for paint. Durability tests on paint films. Determination of resistance to corrosion under a wet (salt fog)/dry/humidity cycle

BS AU 148-2:1969 Methods of test for motor vehicle paints. Resistance to continuous salt spray

BS 7655-8.2:1997

Specification for insulating and sheathing materials for cables. Cross-linked sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fire. Ordinary duty oil-resisting types

BS 3581:1963 Specification for stainless steel cone joint pipe fittings

BS 5365:Part 4:1979, ISO 3701-1976

Methods of sampling and test for anhydrous hydrogen fluoride for industrial use. Determination of hexafluorosilicic acid content

BS 5366:1976, ISO 3139-1976

Methods of sampling and test for aqueous hydrofluoric acid for industrial use

BS 1501:Part 3:1973 Specification for steels for fired and unfired pressure vessels. Plates. Corrosion and heat resisting steels. Imperial units

BS 6136:1981 Specification for dental tweezers CP 1014:1963 Protection of electrical power equipment against climatic conditions

BS AU 40:Part 6:1968 Specification for motor vehicle lighting and signalling equipment. Headlamps for mechanically assisted pedal cycles (mopeds)

BS AU 157b:1982 Specification for children's restraining devices

BS AU 160c:1971 Specification for seat belt assemblies for motor vehicles

BS X 28:1966 Specification for matt synthetic finishing scheme for aeronautical purposes

BS EN 60249-2-4:1994, IEC 60249-2-

Specifications. Specification for epoxide woven glass fabric copper-clad laminated sheet, general purpose grade. Specification No. 4:

4:1987 Epoxide woven glass fabric copper-clad laminated sheet, general purpose grade

BS EN 60249-2-3:1994, IEC 60249-2-3:1987

Specifications. Metal-clad base materials for printed wiring boards. Copper-clad base material. Specification for epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test). Specification No. 3: Epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test)

BS EN 60249-2-9:1994, IEC 60249-2-9:1987

Specifications. Epoxide cellulose paper core, epoxide glass cloth surfaces copper-clad laminated sheet of defined flammability (vertical burning test). Specification No.9:Epoxide cellulose paper core, epoxide glass cloth surfaces copper-clad laminated sheet of defined flammability (vertical burning test)

BS EN 60249-2-17:1993, IEC 60249-2-17:1992

Specifications. Specification No. 17. Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards. Specification No.17: Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards

BS EN 60249-2-18:1993, IEC 60249-2-18:1992

Specifications. Specification No. 18. Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test). Specification No.18: Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)

BS ISO 1458:2002 Metallic coatings. Electrodeposited coatings of nickel

BS 3680-9A:1971 Methods of measurement of liquid flow in open channels. Water level instruments. Specification for the installation and performance of pressure actuated liquid level measuring equipment

BS 6425-2:1993 Test on gases evolved during the combustion of materials from cables. Determination of degree of acidity (corrosivity) of gases by measuring pH and conductivity

BS 1400:1973 Specification for copper alloy ingots and copper and copper alloy castings

Coating saaaaaaaaaaaaaaaaa

Documents

Transcript of Coating saaaaaaaaaaaaaaaaa