Cnc Turning Skt28 Series i

16
CNC TURNING CENTER

description

cnc

Transcript of Cnc Turning Skt28 Series i

Page 1: Cnc Turning Skt28 Series i

CNC TURNING CENTER

Page 2: Cnc Turning Skt28 Series i

CNC Turning Center

New Leader of Medium and Large Size CNC Turning Center

More Powerful For Higher ProductivitySpindle Construction with 130mm (5.12") cylindrical roller and double angular contact ball bearingRigid and reliable servo turret indexHigh accuracy and high rigidity machine SKT28 : 6,100kg(13,448lbs) SKT28L : 8,000kg(17,637lbs) SKT28LM : 8,100kg( 17,857lbs)

Page 3: Cnc Turning Skt28 Series i

World Top Class QualityHYUNDAI-KIA Machine Tool

High Speed, High Accuracy, High Rigidity

CHUCK SIZE 254mm(10 ) [ 305mm(12 )]MAX TURNING LENGTH 720mm(28.3 ) MAX. SWING ON BED 590mm(23.2 )SPINDLE SPEED 3,000rpmSPINDLE MOTOR 22/18.5kW(30/25HP)

254mm(10 )1,070mm(42.1 )

590mm(23.2 )3,000rpm22/18.5kW(30/25HP)

254mm(10 )1,000mm(39.37 )

650mm(25.6 )3,500rpm22/18.5kW(30/25HP)

Page 4: Cnc Turning Skt28 Series i

Speed & Power

The Splendid Double Speed Lathe in

The Next Generation CNC Lathe

High Rigid Box Type Bed Cast

60 degree slanted bed construction makes the turret locates at the heightof the operator’s eyes for easy andquick tool change, and an easy checkup for both sides of inserts.

Page 5: Cnc Turning Skt28 Series i

Reduce Non-Cutting Time with Rapid Traverse of Z-axis,

24m/min (945 ipm)

High-performance AC servo motor and high-accuracy 3-pieces coupling construction.Powerful turret clamping force by hydraulic system.

- SKT 28/28L : 5,725kgf (12,621 lbf)

- SKT 28LM : 4,520kgf (9,967 lbf)

3 pieces turret coupling and servo motor provide steadyand quick turret indexing.

1 step 0.3 sec, Full (5 step) 0.8 sec

The constant power with wide range enables the machine does the heavy duty cutting withinoptimum condition at a low speed with a high power and a high torque.

SKT28/28L 74.4kgf.m (538 lb.ft ) SKT28M 64.7kgf.m (468 lb.ft)

CNC Turning Center SKT28/28L/28LM

SKT28/28L(FANUC 22/18.5kW)

SKT28LM(FANUC 22/18.5kW)

Page 6: Cnc Turning Skt28 Series i

Accuracy

Spindle diameter and thickness are largerthan other machines

Spindle is supported with a combination ofdouble-row cylindrical roller bearing andangular contact ball bearings for accuracyand rigidity.

Wide RPM range main spindle has the minimalheat distortion, which allows machine does theconstant cutting accurately at the high speed.This machine wil l give you the excellentsurface roughness, along with a high accuracyand a minimum noise.

Direct connecting of ballscrew with servo motor to eachaxes provides the high precision.

One-piece cast construction greatly improves rigidity andaccuracy with high power and torque .

Each axis is designed with a large diameterballscrew, fixed by double anchor on both ends to provide high-rigidity and minimize thermal distortion.

Page 7: Cnc Turning Skt28 Series i

CNC Turning Center SKT28/28L/28LM

0 24m/min (945 ipm) : 0.1sec (Z-Axis)High-productivity is accomplished by 0.1sec. superquick Acc/Dec on axis.

High rigidity Excellent damping

i

Compact design Easy to operateVersatile and powerful functions are provided

Page 8: Cnc Turning Skt28 Series i

ConvenienceSuper Power! Rapid Speed! Easy Operation!

SKT28 Series

740kgf (1, 631 lbf) clampingprogrammable tail stock (option)

The front splash guard is sliding door type for easy and wideaccess to the inside of machine.

Chips fall directly into thechip box. The separatetype chip box can beeasily cleaned. A largeopening in the right side ofthe machine is providedfor easy chip discharge.

Q-setter can obtain tool offset automatically by touchingtool, this eliminates the trial cutting, measurements, andtool offset inputs.Even a beginner can finish tool compensation within 40seconds.

Work coordinate is automatically set by justinput the cut off depth on control panel as aparameter after slightly cutting the worksurface. Neither measuring nor calculating isneeded, and work coordinate can be setwithin 30 seconds.

Page 9: Cnc Turning Skt28 Series i

CNC Turning Center SKT28/28L/28LM

Tooling System

fl20, 32

10 STATIONS

(fl 1 )34, 1

2

2

3

1

fl50 (2)

fl16, 20, 25, 32, 40(fl 1,1 1 1 )3

4, 34

14, 1

2,

VDI 4012 STATIONS

1

4

3

2

fl50 (2)

(1 SET)

25(1)

25(1)

25(1)

SKT28/28L

SKT28LM

Unit:mm(in)

Unit:mm(in)

Page 10: Cnc Turning Skt28 Series i

Unit:mm(in)

SpecificationTooling Travel Range

SKT28LM

Axial Driven Tool Holder

Radial Driven Tool Holder

OD Tool

ID Tool

42 (1.65) 99(3.9)

1,020 STROKE(40.16)

690 (27.17) 120.5(4.74)

220

(8.6

6)

5 (0

.2)

190

(7.4

8)30

(1.1

8)( 1

.18)

42 (1.65) 1,020 STROKE(40.16)

184.5(7.26)

690 (27.17) 330 (12.99) 35(1.38)

220

(8.6

6)

192

(7.5

6)

( 1

.18) 3

(0.1

2)

28 (1.1

)

95 (

37.4

)

130

(5.1

2)

150

(5.9

1)70

(2.7

6) 220

(8.6

6)

1,020 STROKE(40.16)

330 (12.99)690 (27.17)

97(3.82)

120 (4.72)

QUILL

899.5 (35.41)

T/S STROKE

87.5(3.44)

132(5.2)

42(1.65)

35(1

.38)

25(0

.98)

45 (

1.77

)

( 1

.18)

1,020 STROKE(40.16)

330 (12.99)

42(1.65)

190

30(1

.18)

5 (0

.2)

145.5(5.73)

74(2.91)

75(2.95) 5

0(

1.9

7)

( 1

.18) 22

0 (8

.66)

690 (27.17)

Page 11: Cnc Turning Skt28 Series i

CNC Turning Center SKT28/28L/28LM

Tool Interference Diagram

SKT28/28L SKT28LM

Unit:mm(in)Tooling Travel Range

SKT28/28L

OD Tool

ID Tool

A

B

C

D

E

SKT 28 SKT 28L

750(29.5) 1,100(43.3)

570(22.4) 920(36.2)

254(10) 254(10)

123(4.8) 123(4.8)

45(1.8) 45(1.8)

Unit:mm(in)

Page 12: Cnc Turning Skt28 Series i

SpecificationExternal Dimensions Unit:mm(in)

SKT28

SKT28L

SKT28LM

Page 13: Cnc Turning Skt28 Series i

Specifications

CNC Turning Center SKT28/28L/28LM

590( 23.2 ) 650( 25.6 )375( 14.8 ) 415( 16.3 )

254( 10 ) [ 305( 12 )]410( 16.1 ) 300( 11.8 )

720(28.3 ) 1,070(42.1 ) 1,000(39.37 )76( 2.99 ) [ 80( 3.15 )]

3,000 3,500STEPLESS

A2-895( 3.74 )130( 5.12 )

- - 0.001- - 100

SERVO10 12

0.3 / 0.825 (1 )

50 ( 2 ) 5,725(12,621) 4,520 (9,967)

- - 4,000- - 20 ( 3/4 )- - M16 (5/8 )- - 5.5/3.7 (7.5/5)- - VDI40

20(787)24(945)

220(8.7 )750 (29.5 ) 1,100(43.3 ) 1,020 (40.2 )

MT#5100( 3.9 )120(4.7 )

570(22.4 ) 920(36.2 )740(1,631)

22/18.5 (30/25) 3(4)

4(5.33)1.2(1.6)

180(47.55) 200(53)25 30

1,950(76.8 )3,010 1,812 3,620 1,812 3,670 1,812

(118.5 71.39 ) (142.5 71.3 ) (144.5 71.3 )6,100(13,448) 8,000(17,637) 8,100(17,857)

FANUC Oi-T [FANUC 21i-T]

CHIP CONVEYOR & BOXGUN COOLANTWORK COUNTERSPINDLE INSIDE STOPPERAUTO DOOR2 STEP CHUCK PRESSURE SYSTEMBAR FEEDER INTERFACESPINDLE INSIDE COOLANTAIR BLOW

CALL LIGHT( 3 COLOR)WEEKLY TIMERPROGRAMMABLE TAIL STOCK

HYDRAULIC HOLLOW CHUCK 1SETSOFT JAW 3EA/1SETQ-SETTER 1SETTOOL HOLDER 1SETCOOLANT SYSTEM 1SETWORK LIGHT 1SETLEVELING PADS 1SETTOOL BOX & HAND TOOL KIT 1SETFOOT SWITCH 1EA

SPINDLE SPEED OVERRIDE 1EASPINDLE RPM METER 1EASPINDLE LOAD METER 1EACHUCK OPEN/CLOSECONFIRMATION SYSTEMDOOR INTERLOCKMANUAL TAIL STOCK

ITEMS SKT28 SKT28L SKT28LMSWING ON THE BEDSWING OVER THE CROSSCHUCK SIZEMAX. TURNING DIA.MAX. TURNING LENGTHBAR CAPACITYMAX. SPINDLE SPEEDSPINDLE TYPESPINDLE NOSESPINDLE THRU HOLE DIA.SPINDLE BRG. DIA.( I.D)MIN. INPUT INCREMENT RAPID TRAVERSEMECHANISMNO. OF TOOLSINDEXING TIME (1TOOL/FULL)TOOL SHANK SIZE(O.D)BORING BAR SIZE(I.D)CLAMP FORCEMAX. SPEEDENDMILLTAPMOTOR POWERTYPE

TAPER SIZEQUILL DIAMETERQUILL STROKETAIL STOCK TRAVELTHRUSTMAIN SPINDLE

TOOL POST

RAPID TRAVERSE

TRAVEL

X-AXISZ-AXISX-AXISZ-AXIS

X-AXISZ-AXIS

HEIGHT(H)

FLOOR SPACE(L W)

FEED

mm(in)mm(in)mm(in)mm(in)mm(in)mm(in)

rpm

ASAmm(in)mm(in)

Deg.rpm

EAsec

mm(in)mm(in)kgf(lbf)

rpmmm(in) mm(in)

kW(HP)

m/min(ipm)m/min(ipm)

mm(in)mm(in)

MTmm(in)mm(in)mm(in)kgf(lbf)

kW(HP)kW(HP)kW(HP)kW(HP)

(gal)KVA

mm(in)

mm(in)

kg(lb)

CAPACITY

SPINDLE

TOOLPOST

LIVETOOL

FEED

TAIL STOCK

MOTOR

COOLANT TANK CAPACITYELECTRIC POWER SUPPLY

MACHINE SIZE

WEIGHTCONTROLLER

C-AXIS

Standard Option

Specifications are subject to change for improvement without notice.

Page 14: Cnc Turning Skt28 Series i

Specification

Controller

Controlled Axes 2(X,Z) axes(Max. 4 axes are available)Simultaneous Controllable Axes 2 axes(Max. 4 axes)Least Input and Command Increment 0.001mm(0.0001 )Spindle Speed Command S5 digits, Binary OutputSpindle Speed Override 50% - 150%(10 Steps)Spindle Orientation(1 Position) ProvidedMaximum Programmable Dimensions +8 DigitsDecimal Point Input ProvidedDirect Drawing Dimension Programming ProvidedMiscellaneous Function M2Canned Cycle: G90, G92, G94 Turning, Threading, FacingProgram Stop and End M00,M01Programmable Data Input(G10) ProvidedManual Jog Feed:Rapid, Jog Feed, Handle ProvidedManual Handle Feedrate x1, x10, x100Feed-rate Override 0-200% : 21 stepJog Override 0~2,000mm/min[79 ipm] : 21 stepRapid Traverse Override F0, F5, F25/F50, F100%Override Cancel ProvidedDwell G04,0-99999.999 secManual Continuous Feed Simultaneous,1 AxisJog-Handle (same mode) ProvidedIncremental Feed X1-1000Manual Reference Point Return ProvidedAutomatic Reference Point Return G28,G29Reference Point Return Check G27Second Reference Point Return G30Tool Nose Radius Compensation G40-G42Tool Function T7+1 / T6+2 digitsGeometry / Wear Compensation ProvidedDirect Input of Tool Offset Value Measured B ProvidedTool Offset Amount 6 digitsTool Offset Pairs 32 PairsTool Life Management ProvidedInch / Metric Conversion ProvidedWorkpiece Coordinate System(G52 ~ G59) ProvidedTape Code EIA RS-244-A/ISO 840(Automatic Recognition)Number of Registerable Progam 200 EAPart Program Storage Length 640M(2,100FT)Reader/Puncher Interface RS232CBuffer Register(256byte) ProvidedCustom Macro B ProvidedBlock Skip/Optional Block Skip(/2 ~ /9) ProvidedOptional Chamfering/Corner R ProvidedCRT/MDI 8.4 Color LCDBack Ground Editing ProvidedRun Hour / Parts Count Display ProvidedProgram Restart Provided

Figures in inch are converted from metric values.Design and specifications subject to change without notice.

Controls

Spindle functions

Feed functions

Tool functions

Coordinate functions

Tape functions

General functions

Reference functions

Program functions

FANUC 0i-T

CNC Turning Center SKT28/28L/28LM

Page 15: Cnc Turning Skt28 Series i

Head Office

Namsan Plant Jungdong Plant Banwol Plant Gwangju Plant

Gwangju Plant

Machine Tools 2nd Plant Posung Plant Seosan Plant Melting & Molding Plant in China

Head Office & Factory

391-8 Kaumjung-Dong, Changwon, Gyeongnam, Korea+82 55 280 9293, +82 55 282 9680 //www.wia.co.kr [email protected]

Seoul Office

8F, Hansol B/D, #736-1, Yeoksam-1Dong, Kangnam-Ku, seoul, Korea

+82 2 2033 8000 +82 2 2033 8181

30 Murray Hill Parkway, Suite 300. East Rutherford, NJ 07073 U.S.A. +1 201 489 2887, +1 201 489 2723//www.hyundai-kiamachine.com [email protected]

Karl-Hermann-Flach-Str. 36, 61440 Oberursel, Germany +49 6171 9790 0, +49 6171 9790 [email protected]

HYUNDAI - KIA MACHINE EUROPE GmbH (Oberursel Office)

Room 908 No. 38 Xiaoyun Road, Chaoyang District, Beijing, China 100027 +86 10 8453 9850, +86 10 8453 9853 [email protected]

HYUNDAI - KIA MACHINE BEIJING

Room 501 Ocular B/D, No. 1336 Wu zhong Road, Shanghai, China 201103 +86 21 3431 0370~3, +86 21 3431 0376 [email protected]

HYUNDAI - KIA MACHINE SHANGHAI

Room 1305 Citic Plaza No. 233 Tianhebei Road. Guangzhou, China 510613 +86 20 8752 1595/1596, +86 20 8752 [email protected]

HYUNDAI - KIA MACHINE GUANGZHOU

HYUNDAI - KIA MACHINE AMERICA CORP. (New Jersey Office)

411 Kingston Court Mt. Prospect IL 60056 +1 847 824 7770, +1 847 824 8995//www.hyundai-kiamachine.com [email protected]

HYUNDAI - KIA MACHINE AMERICA CORP. (Chicago Office)

AV, Alicia Moreau de Justo 1848 Of 4-6 Puerto Madero(C1107AFL), Buenos Aires, Argentina +54 11 4313 1917, +54 11 4313 1929//www.hyundai-kiamachine.com [email protected]

HYUNDAI - KIA MACHINE AMERICA CORP. (Argentina Office)

Kelsterbacher Str. 38-46 D-65479 Raunheim +49 6142 834 0, +49 6142 834 [email protected]

HYUNDAI - KIA MACHINE EUROPE GmbH (Raunheim Service Center)

6B, EGA Trade Center, 809 Poonamallee High Load, Kilpauk, Chennai - 600 010, Tamilnadu, India +91 44 4305 7112, +91 44 4305 [email protected]

HYUNDAI - KIA MACHINE INDIA OFFICE

Page 16: Cnc Turning Skt28 Series i

4. (07. 03)