C N C O P E R A T O R 2

Summary: Perform Tasks assigned to Machine Shop by the CNC Programmer or Management. Set up and operate various CNC Mills/Lathes. Work with Blue prints, sketches, planning sheets, verbal instructions and/or engineering, tooling, or equipment information. Works independently with minimum guidance in a team environment. Able to direct multiple CNC Operator 1 level employees during a specific Shift. Report directly with management team on all efficiency issues or increases.

Essential duties and responsibilities:- Manage and supervise multiple CNC Operator 1 level employees to maximum efficiency levels

- Program and adjust CNC machines at the machine to incorporate all applicable changes as needed.

- Help with design and programming of any new parts, fixtures, jigs, tooling as needed.

- Load and run parts into CNC Mill/Lathe Machines

- Detail and finish Parts per Blueprint

- Maintain production efficiency levels

- Keep machine tools in clean and working order

- Fill out Inspection first article and in process reports

- Complete Job traveler fully and accurately

- Manually QC check all parts before turning into QC Department and notify management if anything is out of spec.

- Turn in First article and be approved before running any new parts.

Education and/or Experience:High School diploma required; College or Technical degree not mandatory but is a definite plus. Minimum of three years CNC experience with a Technical School degree. Experience using CAD/CAM software is needed.

Competitive compensation package based on capabilities and experience.