21700 Northwestern Hwy.Suite 1180 Southfield, MI 48075Tel: (248) 569-9781www.maynards.com

SALE CONDUCTED BY

AUCTIONS LIQUIDATIONS APPRAISALS

IN CONJUNCTION WITH

www.biditup.com

Place your bid now!REGISTER AT

MITSUBISHI DM-1600 “Diamond Cut” CNC Vertical Machining Center AWEA VP2012 HSS Bridge Type CNC VMC 80” x 50” with 2017 Spindle

FOR FURTHER INFO. CONTACT: Mario Mazzuca at (248) 569-9781 or email mario@maynards.com

WEBCAST& ONSITE

CNC, EDM & MOLDING MACHINESLate Model, Very Clean, Mitsubishi, Fidia, Awea, Fadal CNC’s,Nomura CNC Boring Mill, Mitsubishi EDM's & 300-Ton Van Dorn

2013 2006

NOMURA CNC Horizontal Boring Mill HBA-110T-R3, #5105 w/Rotary Table VAN DORN 300HT Reciprocating Screw Plastic Injection Molder

2001

THURS., FEBRUARY 22ND @10:00AM ESTPREVIEW & INSPECTION: Tues. & Wed., Feb. 20 & 21, 9am to 4pm or by Appt.

6833 Auburn Road, Utica, MI 48317

1998

www.maynards.com

MITSUBISHI DM-1000 “Diamond Cut” CNC VMCs AWEA VP2012 HSS Bridge Type CNC VMC 80” x 50” with 2017 Spindle

• 2013 Mitsubishi DM-1600 “Diamond Cut” CNC VMC, 3 Axis, 36” x 60” PowerFeed Table, Power Feed Headstock, One Shot Lubrication System, Oil Cooler,Coolant System, 40 Taper, 32 ATC, Mitsubishi M700 Control, ProgrammableCoolant Nozzle, Habor Chiller, Chip Conveyor, S/N 61QM00052

• 2013 Mitsubishi SV-1300B CNC VMC, 3 Axis, 27” x 51” Power Feed Table,Power Feed Headstock, One Shot Lubrication System, Oil Cooler, CoolantSystem, 50 Taper, 24 ATC, Mitsubishi M70 Control, Habor Chiller, ChipConveyor, S/N 61WF000015

• 2012 Mitsubishi SV-1100B “Diamond Cut” CNC VMC, 3 Axis, 27” x 50”Power Feed Table, Power Feed Headstock, One Shot Lubrication System,Oil Cooler, Coolant System, 50 Taper, 24 ATC, Mitsubishi M70 Control, HaborChiller, Chip Conveyor, S/N 61WO00009

• (2) 2012 Mitsubishi DM-1000 “Diamond Cut” CNC VMCs, 3 Axis, 22” x 38” PowerFeed Table, Power Feed Headstock, One Shot Lubrication System, Oil Cooler,Coolant System, 40 Taper, 32 ATC, Mitsubishi M700 Control, ProgrammableCoolant Nozzle, Habor Chiller, Chip Conveyor, S/N MJ1250007, 61JM00008

• 2006 Awea VP2012 HSS Bridge Type CNC VMC, 80” x 50”, 3 Axis, 44” x 72”Power Feed Table, One Shot Lubrication System, Oil Cooler, Coolant System,50 Taper, 32 ATC, Fanuc 18i-MB Control, Pendant Controller, Chip Conveyor,Spindle Rebuilt in 2017

• 2009 Fadal VMC 4020FX HT CNC VMC, 3 Axis, 18” x 32” Power Feed Table,Power Feed Headstock, One Shot Lubrication System, Oil Cooler, Coolant System,40 Taper, 24 ATC, Fanuc 18i-MB Control, Chip Conveyor, S/N 012008111946

• 2001 Fidia K165 BSH CNC VMC, 5 Axis, 16” x 32” Power Feed Table,One Shot Lubrication System, Oil Cooler, Coolant System, 40 Taper, 20 ATC,Fidia C20 Controller, Chip Conveyor, S/N K165 036

CNC VERTICAL MACHINING

MITSUBISHI DM-1600 “Diamond Cut” CNC Vertical Machining Center

MITSUBISHI SV-1300B CNC Vertical Machining Center MITSUBISHI SV-1100B “Diamond Cut” CNC Vertical Machining Center

2 Available

2013

20122013

2012 2006

www.maynards.com

FADAL VMC 4020FX HT CNC Vertical Machining Center FIDIA K165 BSH CNC Vertical Machining Center, 5-Axis

NOMURA CNC Horizontal Boring Mill HBA-110T-R3, #5105 w/Rotary Table VAN DORN 300HT Reciprocating Screw Plastic Injection Molding Machine

MITSUBISHI EA30E CNC Sinker Type EDM MITSUBISHI EA8 CNC Sinker Type EDM

HORIZONTAL BORING MILL• 1998 Nomura CNC HBM, HBA-110T-R3, #5105, 48” x 60” Air Rotary Table,6” Spindle, 40 Position Tool Changer, Coolant Pump, Fanuc 16M Control

INJECTION MOLDER• 2001 Van Dorn 300HT Reciprocating Screw Plastic Injection MoldingMachine, 300 Ton, 25.4 Ounce, Toggle Clamp Machine, 25” x 25” DistanceBetween Tie Bars, Core Pull, Knock Outs, Hopper, Hopper Magnet, Pathfinder3000 Control, S/N 3365

ELECT. DISCHARGE MACHINES• 2004 Mitsubishi EA30E CNC Sinker Type EDM, DielectricPump/Tank, Mitsubishi C2IEA-2 Control, FP100EA PowerSupply, with System 3R Holder, S/N 04ME3016

• 2001 Mitsubishi EA8 CNC Sinker Type EDM, S/N 5008D 228

CRANES• Detroit Hoist 7-1/2 Ton Single Girder Bridge Crane,50’ Span, S/N 35864

• Detroit Hoist 5 Ton Single Girder Bridge Crane,50’ Span, S/N 141549

REGISTER AT

Place your bid now!

2009 2001

2001

1998

2004 2001

www.maynards.com

CLAUSING-METOSA C1440S Engine Lathe

TRAK DPM3 Vertical Milling Machine TRAK DPM2 Vertical Milling Machine CHEVALIER FM-3VKH Vertical Milling Machine

KENT KGS-410 AHD Hydraulic Feed Wet Surface Grinder HARIG 618 Hand Feed Surface Grinder IKEDA Radial Arm Drill

• 2015 Trak DPM3 Vertical Milling Machine, 5HP, Variable Speed, Proto TrakSMX Control, Power Draw Bar, Coolant Pump, S/N 152DL 767

• 2015 Trak DPM2 Vertical Milling Machine, 3HP, Variable Speed, Proto TrakSMX Control, Power Draw Bar, Coolant Pump, S/N 152DK738

• Chevalier FM-3VKH Vertical Milling Machine, Power Feed X Axis,Anilam DRO, S/N 874310

• Kent KGS-410 AHD Hydraulic Feed Wet Surface Grinder, 16” x 40”Magnetic Chuck, S/N 9603 7102

• Harig 618 Hand Feed Surface Grinder, S/N 8645-W• (2) Harig 612 Hand Feed Surface Grinders, S/Ns: 18008, 20504• Clausing-Metosa C1440S Engine Lathe, 14” x 40”, S/N 31012• Ikeda Radial Arm Drill, 5’ Arm, 17” Column• Branson 910 Ultrasonic Welder, 1,000 Watt• Wells W-9 Horizontal Band Saw, S/N 741970• DoAll 16-SFP Vertical Band Saw, Blade Welder, S/N 79-571470• MAC Sand Blast Cabinet• (3) Deckel Tool Grinders

TOOL ROOM EQUIPMENT

2015 2015

www.maynards.com

• Reis TVS 90/106 Hyd. Spotting Press, 90-Ton, Sliding Bolster,36” x 50” Bolster, S/N 02074

• 2016 Sterling GPAC-20 Chiller, 5HP, R-410A Refrigerant, S/N 46H1285• 2013 Sullivan Palatek 40UD VFD Rotary Screw Air Compressor,40HP, S/N 1209260002

• Compare L886UB Air Compressor, S/N VSDS 107PF/1• Hyster E80XL Electric Forklift, 7,200lb Capacity, Solid Tires,Side Shift, S/N C098D02894T

• Abell Howe 3 Ton Jib Crane• Miller Syncrowave 250 Tig Welder, S/N LA 036217• Haimer PC2000 Heat Shrink Tool Presetter, 3 Station, S/N 7001244• Deltronic Optical Comparator, 14”, Deltronic 612R DRO• Torit 8PP-21347-00 Dust Collector, S/N P 145891

MISCELLANEOUS EQUIPMENT

• 2008 Ford F350 XL Super Duty Pick Up Truck, 104,496 Miles, VIN: 1FTWF31568ED78861• 1998 Chevy C6500 Flat Bed Stake Truck, 36,542 Miles, VIN: 1GBJ6H1J6WJ106033

VEHICLES

FORD F350 XL Super Duty Pick Up Truck with 104,000 Miles CHEVY C6500 Flat Bed Stake Truck with Only 36,000 Miles!

View of Cranes View of Magnetic Chucks

View of Slotted Holders View of Tool Holders

2008 2005

REIS TVS 90/106 Hyd. Spotting Press STERLING GPAC-20 Chiller

REIS TVS 90/106 Hyd. Spotting Press DELTRONIC Optical Comparator

2016

2013

6833 Auburn RoadUtica, MI 48317

MITSUBISHI DM-1600 “Diamond Cut” CNC VMC AWEA VP2012 HSS Bridge Type CNC VMC 80” x 50” NOMURA CNC HBM HBA-110T-R3, #5105 w/Rotary Table

21700 Northwestern Hwy.Suite 1180 Southfield, MI 48075

Steve Mattes, AuctioneerMI License #???Brian Holland, AuctioneerMI License #???BIDITUP, MI License #???

TERMS & CONDITIONS PAYMENT: 25% NON-REFUNDABLE DEPOSIT ONAWARD OF BID, BALANCE WITHIN 24 HOURS. PAYMENT IS CASH, CASHIER’S CHECK,CERTIFIED CHECK, WIRE TRANSFER, COMPANY CHECK ONLY IF ACCOMPANIED BY ALETTER FROM YOUR BANK GUARANTEEING AMOUNT OF CHECK FOR DEPOSITAND/OR PAYMENT IN FULL. NO PERSONAL CHECKS. FULL PAYMENT MUST BEMADE BEFORE REMOVAL OF PURCHASE. REMOVAL: LAST DAY OF REMOVAL IS FRIDAY,MARCH 9, 2018, AND AS FURTHER DEFINED IN THE SALE CATALOGUE, EVERYTHINGIS SOLD “AS IS, WHERE IS”. ALL SALES FINAL. COST AND RESPONSIBILITY FORREMOVAL OF PURCHASE REMAINS WITH THE PURCHASER. EVERY EFFORT WILL BEMADE TO FACILITATE REMOVAL. WHILE QUANTITIES AND DESCRIPTIONS AREBELIEVED TO BE ACCURATE, THE AUCTIONEER, OWNERS OR COUNSEL MAKE NOWARRANTIES OR GUARANTEES EITHER EXPRESSED OR IMPLIED AS TO AUTHENTICITY,GENUINENESS OF, OR DEFECTS IN ANY LOT AND WILL NOT BE HELD RESPONSIBLEFOR ANY ADVERTISING DISCREPANCIES OR INACCURACIES. NO WARRANTIESWHATSOEVER ARE MADE AS TO CONDITION MERCHANTABILITY OR FITNESS FORUSE OF ANY ITEM. MAY WE SUGGEST YOU TAKE FULL ADVANTAGE OF THE PREVIEWAND INSPECTION PERIOD. SALE SUBJECT TO ADDITIONS, DELETIONS & PRIORSALES. PLEASE CHECK AVAILABILITY OF EQUIPMENT.

BUYERS PREMIUMS: 16% ON-SITE, 16% ON-LINE

DRIVING DIRECTIONS FROMDETROIT METROPOLITAN WAYNECOUNTY AIRPORTApprox. 43.1 miles, 51 mins.Head northeast on John D Dingell Dr. Keep left tostay on John D Dingell Dr. Merge onto W G RogellDr. Use the right lane to take the I-94 E ramp toDetroit. Keep left, follow signs for I-94 E/Detroitand merge onto I-94 E. Merge onto I-94 E. Takeexit 216A to merge onto I-75 N toward Flint. Usethe right 2 lanes to take exit 61 to merge ontoI-696 E toward Port Huron. Use the right 2 lanesto take exit 22 for Mound Rd. Keep left at the fork,follow signs for Mound Rd N and merge ontoMound Rd. Merge onto Mound Rd. Use the right2 lanes to turn right onto Dobry Dr. Turn left ontoUtica Rd. Turn left at the 1st cross street ontoAuburn Rd. Destination will be on the right.

Auction Site

PREVIEW & INSPECTION:Tues. & Wed., February 20 & 21

9:00am to 4:00pm or by Appointment

THURS., FEB. 22ND@10:00AM EST

WEBCAST& ONSITE

CNC, EDM & MOLDING MACHINESLate Model, Very Clean, Mitsubishi, Fidia, Awea, Fadal CNC’s,Nomura CNC Boring Mill, Mitsubishi EDM's & 300-Ton Van Dorn

2013 2006 1998

21700 Northwestern Hwy.Suite 1180 Southfield, MI 48075Tel: (248) 569-9781www.maynards.com

SALE CONDUCTED BY

AUCTIONS LIQUIDATIONS APPRAISALS

IN CONJUNCTION WITH

www.biditup.com

Place your bid now!REGISTER AT