CN Forklift Training Centre Mississauga, ON, Canada

“Knowledge Partners For Your Career Upliftment. “

“Knowledge of safe techniques can save your life.”

• Experienced Training Staff.• Emphasis On Individual Growth.• Headquartered in Mississauga with 100+

training centers in Canada.• Special Discounts on Courses for Students

and New-comers.• Timely completion of Training and Re-

certification Courses.• Expert Guidance To Point Your Career In

The Right Direction.

Why choose CN Forklift Training Centre..?

Forklift Operators are required to attain training with regular evaluation.

Employer recommends Proper Training Certification And Evaluation.

Operators are to operate only those forklifts which they have been trained on.

Overview

• Re-Certification of Competence• Refresher Courses and Pre-operation

check list Training• Practical and Theoretical Training• WHMIS Training• Fall Prevention/Protection Training• Existing Operator Certification

Course

Forklift Recertification & Courses

With the introduction of new models of forklifts, technological advancements and changing guidelines due to amendments in the Occupational Health & Safety legislatures, there is a need to go along with the times. Our Re-certification of Competence Course aims at these areas of improvement.

Courses

Re-Certification of Competence

Courses

Refresher courses & Pre-operation check list Training

We provide a short educational course to review the subject and developments on your acquired skill to improve it even further. Experienced Fork Lift Trainers can do the Refresher Course rather than going through with the complete training program. The short Refresher Course helps to enhance and improve your skill.

Courses

Practical & Theoretical Training

Circle Checkup [Pre Trip Inspection]Counter BalanceReach (Narrow Aisle)Cherry PickerPallet Truck [Walkie] and Scissor lift.

(Includes WHMIS Signs) .MSDS (Material Safety Data Sheet training .Training of WHMIS Labels and Symbols .Onsite as well as Offsite Training. Video based self study program.Contact us for all kind of medical and

theoretical training at your location.

WHMS Training

Falls are the main cause of Fatal accidents at the work site all over the world. We train our participants regarding fall protection and prevention for maximum safety at work place. Its mandatory to be trained for fall protection for recruitment in most industries.

Courses

Fall Prevention/Protection Training

This course is designed for the individuals who possess the required lift truck operator experience but lack a formal training. This program will enhance your professional operator level knowledge of safe lift truck operation. Operators are evaluated on theoretical and practical grounds.

Courses

Existing Operator certification Course

Dock Stoker Sit-Down Counter Balance Order pickers and Cheery pickers

Single Reach and Double Reach Trucks (Crown)

Forklift Machines

Raymond 5000 Series Order pickers include:• Raymond’s AC powered trucks offer faster travel and lift speeds.• Advanced intellispeed smoothly coordinates travel speed and load height.• Contoured handle naturally fits the hand and provides a sure grip during travel.• Special auto-locking pallet clamp designed to work on a wide range of pallets from 1¼” to 5″.

Forklift Machines

Dock Stoker

Forklift Machines

Sit -Down Counter Balance

• The three-wheel design (SC Series) is ideal for dock, transportation or racking applications. As the shortest 3,000 lb capacity truck in the industry, this workhorse offers additional flexibility to maneuver in tight workspaces.• The four-wheel design (FC Series) includes higher capacities and an attachment friendly design with intelligence, durability and up time benefits that drive more productivity.

Forklift Machines

Order pickers and Cheery pickers

Raymond Stand-up Counterbalanced Trucks include:• AC Drive • Single-axis Control Handle • Dual AC Drive Motors• 3,000 and 3,500 lb. Capacities

Forklift Machines

Single Reach & Double Reach trucks(Crown)

• AC Powered System delivers precise speed and torque control loaded or unloaded.• AC Hydraulic Control System provides fully variable lift/lower control for fast, efficient and smooth operation.• Multi function Control Handle allows single-handed control of travel, lift/lower, tilt, reach/retract (including high speed), horn and optional side shifter for simplified operation.

• Legislation Issues• Stability of Operations• Starting And Shutting the Machines• Managing load handling equipment• Personal Lifting• Re fueling and Recharging of batteries• Pre-check and Inspections• Online Training Facility available.

Training Topics

Features

• We Provide Complete Services Under One Roof.• Creating A Sense Of Urgency On Forklift Safety Without

Inflicting Panic.• Providing Additional Knowledge About The Subject And

Keeping Things Simple.• Extremely Thorough And Specific Training Methods.• Keeping Alive The Interest In The Subject.• Imparting Training Through Innovative, Interactive And

Interesting Ideas.• Our Training Courses Are Available In English ,

Spanish , Dutch, Punjabi, Hindi , Urdu.

(905)-405-0001CN Forklift Training CenterUnit 4,7033 Telford WayMississauga,ON,Canada, L5S 1V4

http://cnforklifttraining.com/