CME Installation and Operation ISSUE1.0
-
Upload
osama-el-mesalawy -
Category
Documents
-
view
251 -
download
0
Transcript of CME Installation and Operation ISSUE1.0
-
7/27/2019 CME Installation and Operation ISSUE1.0
1/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved
www.huawei.com
Internal
CME Installation and Operation
ISSUE 4.0
-
7/27/2019 CME Installation and Operation ISSUE1.0
2/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 2
Review
The CME (Configuration Management Express) of the
WCDMA Radio Access Network (WRAN) is designed for the
following engineers for data configuration
Field engineer
Network operator
System engineer
The CME can be used for HUAWEI RNC and NodeB data
configuration
-
7/27/2019 CME Installation and Operation ISSUE1.0
3/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 3
Objectives
Describe the feature of the CME
Discuss software installation of the CME
Discuss the operation of the CME
Upon completion of this course, you will be able to:
-
7/27/2019 CME Installation and Operation ISSUE1.0
4/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 4
I. CME Features
II. CME Installation
III. CME Operation
-
7/27/2019 CME Installation and Operation ISSUE1.0
5/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 5
Architecture ofthe CME
Logically, the CME consists of the following components:
CME server
CME client
CME server and client communicate with IP network
Physically, the CME client and CME server can be located either on
the same PC or on different PCs
CME Client
Network Equipments
LAN
CME
Server
CME Client
CME
Server
-
7/27/2019 CME Installation and Operation ISSUE1.0
6/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 6
Running Modes of the CME CME in RNC Disconnected Mode
CMEserver CME client
Read data
Save data
CME in RNC Connected Mode
CMEserver CME
client
CME
RNC
M2000
server
M2000 FTP
server
M2000
server
MML
channel
XML
channel
NodeB
Synchronization
channel
-
7/27/2019 CME Installation and Operation ISSUE1.0
7/23HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 7
CME for Initial Configuration in Network Commissioning
RAN Initial Data Configuration
Configuring data based on the RAN network planning
Exporting configuration data files
Loading the files to the RNC and NodeB through LMTs
CMEWizardsof thetask focused
Planned Radio
data
Cell Radio
Parameter
templates
NodeB
Templates
Script is downloaded
and activated
RAN
RNSRNC
NodeB
RNSRNC
NodeB
-
7/27/2019 CME Installation and Operation ISSUE1.0
8/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 8
CME for Data Modification in Network Expansion
RAN Data Modification
Adding/deleting/modifying a RNC WRBS
Adding/deleting/modifying a NodeB
Adding/deleting/modifying a cell
Modifying algorithm setting for RNO
CMEWizardsof thetask focused
Planned Radio
data
Cell Radio
Parameter
templates
NodeB
Templates
Script is downloaded
and activatedUpload
RAN
RNSRNC
NodeB
RNSRNC
NodeB
-
7/27/2019 CME Installation and Operation ISSUE1.0
9/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 9
Other Features of the CME
The CME has the following features:
Automatic Data Refreshing on the Iub Interface
Convenient Resource Management
Intelligent Data Operation
Multiple Types of Data for Export
Project-Based Data Management
Auxiliary Data Modification Tool
User-Friendly Online Help
-
7/27/2019 CME Installation and Operation ISSUE1.0
10/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 10
I. CME Features
II. CME Installation
III. CME Operation
-
7/27/2019 CME Installation and Operation ISSUE1.0
11/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 11
System Requirements for the CME ServerHardware Minimum configuration Standard configuration
CPU Pentium III 1.0 GHz processor Pentium IV 2.4 GHz processor
Memory 256 MB 512 MBHard disk 10 GB 40 GB
Driver CD-ROM CD-ROM
Network adapter Ethernet adapter Ethernet adapter
Video adapter VGA VGA or above
Software Recommended configuration
Operating system
If the database software is MSDE2000 with version A
Microsoft Windows 2000 Professional with Service Pack 2 or above
Microsoft Windows XP with Service Pack 1 or above
If the database software is SQL Server 2000 with Service Pack 3 or above
Microsoft Windows 2000 Server with Service Pack 2 or above
Microsoft Windows Server 2003 with Service Pack 1 or above
Database software MSDE2000 version A or SQL Server 2000
-
7/27/2019 CME Installation and Operation ISSUE1.0
12/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 12
System Requirements for the CME Client
Hardware Minimum configuration Recommended configuration
CPU Pentium III 866 MHzprocessor
Pentium IV 1.6 GHz processor
Memory 256 MB 256 MB
Hard disk 10 GB 40 GB
Driver CD-ROM CD-ROM
Network adapter Ethernet adapter Ethernet adapter
Video adapter VGA VGA or above
Software Recommended configuration
Operating
system
The operating system can be one of the following:
Microsoft Windows 2000 Professional with Service Pack 2 orabove
Microsoft Windows XP Professional with Service Pack 1 or
above
-
7/27/2019 CME Installation and Operation ISSUE1.0
13/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 13
Installing the CME Server and Client
Installing the CME Server Checking software configuration on
If any database software is configuration, and then uninstall
Installing the database software
Double clicking the MSDE2000A install.bat file Checking the installation results
Installing the CME Client
Double clicking the CME setup file
Using the password CME
-
7/27/2019 CME Installation and Operation ISSUE1.0
14/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 14
I. CME Features
II. CME Installation
III. CME Operation
-
7/27/2019 CME Installation and Operation ISSUE1.0
15/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 15
Interface of the CME
-
7/27/2019 CME Installation and Operation ISSUE1.0
16/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 16
Starting Data Configuration
Initial Data Configuration
Creating a new project and configuring the data
Configuring the CME server information
Defining the new project name in the specific server
Beginning the data configuration for RNC and NodeB
Importing the negotiation data to finish data configuration
The initial data configuration is done according to the network negotiation datafrom RNP
Data Modification
Opening an exiting project and modifying the data
Creating a new project and importing data from RNC BAM and modifying the data
Restoring the server from backup data and modifying the data
The data modification is done according to the RNP or RNO
-
7/27/2019 CME Installation and Operation ISSUE1.0
17/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 17
Starting Data Configuration Initial Data Configuration
Creating a new project and configuring the data
Configuring the CME server information
Defining the new project name in the specific server
Beginning the data configuration for RNC and NodeB
Importing the negotiation data to finish data configuration
The initial data configuration is done according to the network negotiation data
from RNP
Data Modification
Opening an exiting project and modifying the data
Creating a new project and importing data from RNC BAM and modifying the data
Restoring the server from backup data and modifying the data
The data modification is done according to the RNP or RNO
-
7/27/2019 CME Installation and Operation ISSUE1.0
18/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 18
Configuring RNC and NodeB
RNC Data Configuration
Configuring RNC basic information and equipment
Configuring adjacent nodes
Configuring terrestrial interface transport layer
Configuring the logical cell
NodeB Data Configuration
Configuring a NodeB step by step
Configuring the NodeB basic information and equipment
Configuring the Iub transport layer
Refreshing Iub interface to synchronize the data with RNC
Configuring the local cell
-
7/27/2019 CME Installation and Operation ISSUE1.0
19/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 19
Modifying Specific Data
Configuring a new NodeB data quickly
Starting the tool of NodeB CM Wizard
Modifying logical cell data for a batch of cells
Starting the tool of Bulk Modify Wizard
Delete all the data for a cell, a NodeB or a WRBS
Starting the tool of Delete Wizard
-
7/27/2019 CME Installation and Operation ISSUE1.0
20/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 20
Exporting RNC Configuration Data
Exporting RNC Configuration Data
Checking Configuration Data
Checking the radio algorithm setting
Starting the tool of Radio Algorithm Compare
Checking the integrity and redundancy of the configuration data
Starting the tool of Sanity Check
Exporting the Configuration Data
Exporting MML command
RNC config data
NodeB config data
Cell config data
Algorithm config data
-
7/27/2019 CME Installation and Operation ISSUE1.0
21/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 21
Exporting NodeB Configuration Data
Export NodeB Configuration Data
Checking Configuration Data
Checking the redundancy of NodeB configuration data
Exporting the Configuration Data
Exporting the Configuration Data Exporting NodeB data configuration file
Exporting NodeB template file
-
7/27/2019 CME Installation and Operation ISSUE1.0
22/23
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved Page 22
Exporting Project Data
Exporting negotiation data Exporting project report
Backup the project data
-
7/27/2019 CME Installation and Operation ISSUE1.0
23/23
www.huawei.com
Thank You