CM- - stalc.ru · The CM-70 drilling rig, is the evolution of the already existing equipment...
Transcript of CM- - stalc.ru · The CM-70 drilling rig, is the evolution of the already existing equipment...
HYDRAULIC CFA ROTARY RIG
Dri l l ing and Foundat ion Equipment
CM-70
04/2
005
• 150
0 • N
• Tu
ttas
tam
pa
In 1990 Soilmec was awarded with the certification of its
Quality System complying with ISO 9001/UNI 29001 standards.
SOILMEC S.p.A.Drilling and Foundation Equipment
Dri l l ing and Foundat ion Equ ipment
Hydraulic pumps
Main pumps lt/min 2 x 230Max working pressure MPa 32,5
Main winch Type SW-170
1st layer nominal line pull kN 1701st layer nominal rope speed m/min 73Rope diameter mm 24
1st layer nominal line pull kN 751st layer nominal rope speed m/min 58Rope diameter mm 19
Auxiliary winch Type SW-90.3
Rotary table
Nominal torque kNm 153 @ 8,0 rpmMaximum drilling speed rpm 26
Weight and dimension
Transport width m 2,7Transport height m 3,5Operating weight ton 55 - 60Transport weight ton 53Minimum transport weight (counterweight & rotary removed) ton 44
Additional std. features
Folding and self-erecting mastCathead c/w folding deviceSelf-lifting counterweight (weigth 6000 kg)
Undercarriage
Overall lenght mm 5190Track shoe width mm 700 (800 opt)Overall width (extendable tracks) mm 3900 (4100)Overall width (closed tracks) mm 2500 (2700)Ground pressure MPa 0,085
4
2
3
111
105154
5188
4000
17366
(980
- 0
)
3479
2500
2727
5188
1182
20°
1182
1950
1950
27°
R 3383
700
700
750
2569
5
2216
660
00
1198
370
6000
2424
3
1576
5
1110
960
1334
1020
100
3224
4330
A new model
HYDRAULIC DRILLING RIG
CM-70The CM-70 drilling rig, is the evolution of the already existing equipment dedicated to Continuous Flight Augerdrilling technique.
The upper structure of the CM-70 is mounted on SOILMEC base carrier and has been designed to perform:- C.F.A. bored piles- piles bored with Down-The-Hole-Hammer (D.T.H.)
Its outstanding features are:- completely self-erecting- up-to-date instrumentation- high reliability and safety in the job-site- quick installation- extendable tracks from 2.5 to 3.9 m- easy manoeuvrability- low transport costs- high production- reduced transport dimensions- 360° turret rotation
Options features:- pre-arrangement for double rotary (C.S.P.)- track shoes 800 mm wide- pull-down winch (90 kN)- grids for front cab protection- air conditioning or heating system for the cab- two-axle electronic inclinometer in the cab- electronic system to control the extraction pull; it is provided with visual and sound alarm in case of overloading- ladder on mast complete with parachute- 4” or 5" concrete pipework on the mast, supplied with insulation, upon request, for tropical climates- auger cleaner (Ø 1000 mm max.)- VTH-1 vibrator power take off for cage driving.
HYDRAULIC CFA ROTARY RIG
Transport Condition
HYDRAULIC CFA ROTARY RIG
CM-70
Working Condition1 - Undercarriage with extendable tracks,parallelogram system or removabletracks
2 - Self-lifting counterweight
3 - Turret of 360° slew rig c/w diesel engineCATERPILLAR 3126B Attach 1, soundproofcanopy and power pack
4 - Winch assembly
5 - Self erecting mast on which can be applied the max torque over the whole length 22 m
6 - Continuous Flight Auger
7 - Sheave cathead
8 - Rotary head with 3 drilling speeds.For each drilling speed the max torque is obtained
9 - Auger extension
10 - Openable lower guide
11 - Foot element
CM-70HYDRAULIC CFA ROTARY RIG
Working Radius
6
5
9
8
7A new model Diesel engine
Make / Model CATERPILLAR 3126B Attach 1Max Power kW (HP) 231 (310) @ 2500 rpm
3900 (4100)700
544
Pictures
mm 1000m 22 (+ 6 extension)m 20 (+ 6 extension)kN 680kN 90mm 1000
Drilling Performances
Max pile diameterMax pile depthMax pile depth (w/auger cleaner)Max extracion forcePull-down winch force (optional)Auger cleaner max diameter
Sheave cathead
Pull-downwinch (optionals)
Hydraulic pumps
Main pumps lt/min 2 x 230Max working pressure MPa 32,5
Main winch Type SW-170
1st layer nominal line pull kN 1701st layer nominal rope speed m/min 73Rope diameter mm 24
1st layer nominal line pull kN 751st layer nominal rope speed m/min 58Rope diameter mm 19
Auxiliary winch Type SW-90.3
Rotary table
Nominal torque kNm 153 @ 8,0 rpmMaximum drilling speed rpm 26
Weight and dimension
Transport width m 2,7Transport height m 3,5Operating weight ton 55 - 60Transport weight ton 53Minimum transport weight (counterweight & rotary removed) ton 44
Additional std. features
Folding and self-erecting mastCathead c/w folding deviceSelf-lifting counterweight (weigth 6000 kg)
Undercarriage
Overall lenght mm 5190Track shoe width mm 700 (800 opt)Overall width (extendable tracks) mm 3900 (4100)Overall width (closed tracks) mm 2500 (2700)Ground pressure MPa 0,085
4
2
3
111
105154
5188
4000
17366
(980
- 0
)
3479
2500
2727
5188
1182
20°
1182
1950
1950
27°
R 3383
700
700
750
2569
5
2216
660
00
1198
370
6000
2424
3
1576
5
1110
960
1334
1020
100
3224
4330
A new model
HYDRAULIC DRILLING RIG
CM-70The CM-70 drilling rig, is the evolution of the already existing equipment dedicated to Continuous Flight Augerdrilling technique.
The upper structure of the CM-70 is mounted on SOILMEC base carrier and has been designed to perform:- C.F.A. bored piles- piles bored with Down-The-Hole-Hammer (D.T.H.)
Its outstanding features are:- completely self-erecting- up-to-date instrumentation- high reliability and safety in the job-site- quick installation- extendable tracks from 2.5 to 3.9 m- easy manoeuvrability- low transport costs- high production- reduced transport dimensions- 360° turret rotation
Options features:- pre-arrangement for double rotary (C.S.P.)- track shoes 800 mm wide- pull-down winch (90 kN)- grids for front cab protection- air conditioning or heating system for the cab- two-axle electronic inclinometer in the cab- electronic system to control the extraction pull; it is provided with visual and sound alarm in case of overloading- ladder on mast complete with parachute- 4” or 5" concrete pipework on the mast, supplied with insulation, upon request, for tropical climates- auger cleaner (Ø 1000 mm max.)- VTH-1 vibrator power take off for cage driving.
HYDRAULIC CFA ROTARY RIG
Transport Condition
HYDRAULIC CFA ROTARY RIG
CM-70
Working Condition1 - Undercarriage with extendable tracks,parallelogram system or removabletracks
2 - Self-lifting counterweight
3 - Turret of 360° slew rig c/w diesel engineCATERPILLAR 3126B Attach 1, soundproofcanopy and power pack
4 - Winch assembly
5 - Self erecting mast on which can be applied the max torque over the whole length 22 m
6 - Continuous Flight Auger
7 - Sheave cathead
8 - Rotary head with 3 drilling speeds.For each drilling speed the max torque is obtained
9 - Auger extension
10 - Openable lower guide
11 - Foot element
CM-70HYDRAULIC CFA ROTARY RIG
Working Radius
6
5
9
8
7A new model Diesel engine
Make / Model CATERPILLAR 3126B Attach 1Max Power kW (HP) 231 (310) @ 2500 rpm
3900 (4100)700
544
Pictures
mm 1000m 22 (+ 6 extension)m 20 (+ 6 extension)kN 680kN 90mm 1000
Drilling Performances
Max pile diameterMax pile depthMax pile depth (w/auger cleaner)Max extracion forcePull-down winch force (optional)Auger cleaner max diameter
Sheave cathead
Pull-downwinch (optionals)
Hydraulic pumps
Main pumps lt/min 2 x 230Max working pressure MPa 32,5
Main winch Type SW-170
1st layer nominal line pull kN 1701st layer nominal rope speed m/min 73Rope diameter mm 24
1st layer nominal line pull kN 751st layer nominal rope speed m/min 58Rope diameter mm 19
Auxiliary winch Type SW-90.3
Rotary table
Nominal torque kNm 153 @ 8,0 rpmMaximum drilling speed rpm 26
Weight and dimension
Transport width m 2,7Transport height m 3,5Operating weight ton 55 - 60Transport weight ton 53Minimum transport weight (counterweight & rotary removed) ton 44
Additional std. features
Folding and self-erecting mastCathead c/w folding deviceSelf-lifting counterweight (weigth 6000 kg)
Undercarriage
Overall lenght mm 5190Track shoe width mm 700 (800 opt)Overall width (extendable tracks) mm 3900 (4100)Overall width (closed tracks) mm 2500 (2700)Ground pressure MPa 0,085
4
2
3
111
105154
5188
4000
17366
(980
- 0
)
3479
2500
2727
5188
1182
20°
1182
1950
1950
27°
R 3383
700
700
750
2569
5
2216
660
00
1198
370
6000
2424
3
1576
5
1110
960
1334
1020
100
3224
4330
A new model
HYDRAULIC DRILLING RIG
CM-70The CM-70 drilling rig, is the evolution of the already existing equipment dedicated to Continuous Flight Augerdrilling technique.
The upper structure of the CM-70 is mounted on SOILMEC base carrier and has been designed to perform:- C.F.A. bored piles- piles bored with Down-The-Hole-Hammer (D.T.H.)
Its outstanding features are:- completely self-erecting- up-to-date instrumentation- high reliability and safety in the job-site- quick installation- extendable tracks from 2.5 to 3.9 m- easy manoeuvrability- low transport costs- high production- reduced transport dimensions- 360° turret rotation
Options features:- pre-arrangement for double rotary (C.S.P.)- track shoes 800 mm wide- pull-down winch (90 kN)- grids for front cab protection- air conditioning or heating system for the cab- two-axle electronic inclinometer in the cab- electronic system to control the extraction pull; it is provided with visual and sound alarm in case of overloading- ladder on mast complete with parachute- 4” or 5" concrete pipework on the mast, supplied with insulation, upon request, for tropical climates- auger cleaner (Ø 1000 mm max.)- VTH-1 vibrator power take off for cage driving.
HYDRAULIC CFA ROTARY RIG
Transport Condition
HYDRAULIC CFA ROTARY RIG
CM-70
Working Condition1 - Undercarriage with extendable tracks,parallelogram system or removabletracks
2 - Self-lifting counterweight
3 - Turret of 360° slew rig c/w diesel engineCATERPILLAR 3126B Attach 1, soundproofcanopy and power pack
4 - Winch assembly
5 - Self erecting mast on which can be applied the max torque over the whole length 22 m
6 - Continuous Flight Auger
7 - Sheave cathead
8 - Rotary head with 3 drilling speeds.For each drilling speed the max torque is obtained
9 - Auger extension
10 - Openable lower guide
11 - Foot element
CM-70HYDRAULIC CFA ROTARY RIG
Working Radius
6
5
9
8
7A new model Diesel engine
Make / Model CATERPILLAR 3126B Attach 1Max Power kW (HP) 231 (310) @ 2500 rpm
3900 (4100)700
544
Pictures
mm 1000m 22 (+ 6 extension)m 20 (+ 6 extension)kN 680kN 90mm 1000
Drilling Performances
Max pile diameterMax pile depthMax pile depth (w/auger cleaner)Max extracion forcePull-down winch force (optional)Auger cleaner max diameter
Sheave cathead
Pull-downwinch (optionals)
Hydraulic pumps
Main pumps lt/min 2 x 230Max working pressure MPa 32,5
Main winch Type SW-170
1st layer nominal line pull kN 1701st layer nominal rope speed m/min 73Rope diameter mm 24
1st layer nominal line pull kN 751st layer nominal rope speed m/min 58Rope diameter mm 19
Auxiliary winch Type SW-90.3
Rotary table
Nominal torque kNm 153 @ 8,0 rpmMaximum drilling speed rpm 26
Weight and dimension
Transport width m 2,7Transport height m 3,5Operating weight ton 55 - 60Transport weight ton 53Minimum transport weight (counterweight & rotary removed) ton 44
Additional std. features
Folding and self-erecting mastCathead c/w folding deviceSelf-lifting counterweight (weigth 6000 kg)
Undercarriage
Overall lenght mm 5190Track shoe width mm 700 (800 opt)Overall width (extendable tracks) mm 3900 (4100)Overall width (closed tracks) mm 2500 (2700)Ground pressure MPa 0,085
4
2
3
111
105154
5188
4000
17366
(980
- 0
)
3479
2500
2727
5188
1182
20°
1182
1950
1950
27°
R 3383
700
700
750
2569
5
2216
660
00
1198
370
6000
2424
3
1576
5
1110
960
1334
1020
100
3224
4330
A new model
HYDRAULIC DRILLING RIG
CM-70The CM-70 drilling rig, is the evolution of the already existing equipment dedicated to Continuous Flight Augerdrilling technique.
The upper structure of the CM-70 is mounted on SOILMEC base carrier and has been designed to perform:- C.F.A. bored piles- piles bored with Down-The-Hole-Hammer (D.T.H.)
Its outstanding features are:- completely self-erecting- up-to-date instrumentation- high reliability and safety in the job-site- quick installation- extendable tracks from 2.5 to 3.9 m- easy manoeuvrability- low transport costs- high production- reduced transport dimensions- 360° turret rotation
Options features:- pre-arrangement for double rotary (C.S.P.)- track shoes 800 mm wide- pull-down winch (90 kN)- grids for front cab protection- air conditioning or heating system for the cab- two-axle electronic inclinometer in the cab- electronic system to control the extraction pull; it is provided with visual and sound alarm in case of overloading- ladder on mast complete with parachute- 4” or 5" concrete pipework on the mast, supplied with insulation, upon request, for tropical climates- auger cleaner (Ø 1000 mm max.)- VTH-1 vibrator power take off for cage driving.
HYDRAULIC CFA ROTARY RIG
Transport Condition
HYDRAULIC CFA ROTARY RIG
CM-70
Working Condition1 - Undercarriage with extendable tracks,parallelogram system or removabletracks
2 - Self-lifting counterweight
3 - Turret of 360° slew rig c/w diesel engineCATERPILLAR 3126B Attach 1, soundproofcanopy and power pack
4 - Winch assembly
5 - Self erecting mast on which can be applied the max torque over the whole length 22 m
6 - Continuous Flight Auger
7 - Sheave cathead
8 - Rotary head with 3 drilling speeds.For each drilling speed the max torque is obtained
9 - Auger extension
10 - Openable lower guide
11 - Foot element
CM-70HYDRAULIC CFA ROTARY RIG
Working Radius
6
5
9
8
7A new model Diesel engine
Make / Model CATERPILLAR 3126B Attach 1Max Power kW (HP) 231 (310) @ 2500 rpm
3900 (4100)700
544
Pictures
mm 1000m 22 (+ 6 extension)m 20 (+ 6 extension)kN 680kN 90mm 1000
Drilling Performances
Max pile diameterMax pile depthMax pile depth (w/auger cleaner)Max extracion forcePull-down winch force (optional)Auger cleaner max diameter
Sheave cathead
Pull-downwinch (optionals)
HYDRAULIC CFA ROTARY RIG
Dri l l ing and Foundat ion Equipment
CM-70
04/2
005
• 150
0 • N
• Tu
ttas
tam
pa
In 1990 Soilmec was awarded with the certification of its
Quality System complying with ISO 9001/UNI 29001 standards.
SOILMEC S.p.A.Drilling and Foundation Equipment
Dri l l ing and Foundat ion Equ ipment
HYDRAULIC CFA ROTARY RIG
Dri l l ing and Foundat ion Equipment
CM-70
04/2
005
• 150
0 • N
• Tu
ttas
tam
pa
In 1990 Soilmec was awarded with the certification of its
Quality System complying with ISO 9001/UNI 29001 standards.
SOILMEC S.p.A.Drilling and Foundation Equipment
Dri l l ing and Foundat ion Equ ipment
HYDRAULIC CFA ROTARY RIG
Dri l l ing and Foundat ion Equipment
CM-70
04/2
005
• 150
0 • N
• Tu
ttas
tam
pa
In 1990 Soilmec was awarded with the certification of its
Quality System complying with ISO 9001/UNI 29001 standards.
SOILMEC S.p.A.Drilling and Foundation Equipment
Dri l l ing and Foundat ion Equ ipment