Clue Machinery - November 2014 Issue
-
Upload
clue-machinery-advertiser -
Category
Documents
-
view
275 -
download
21
description
Transcript of Clue Machinery - November 2014 Issue
M A C H I N E R Y
NOVEMBER 2014Volume 29 Number 11Phone: 905-528-7765
Fax: 905-917-0222www.cluemachines.com
email: [email protected]
Your Production Matters To Us
PROFILE ROLLS
PLATE ROLLS
PRESS BRAKES
FIBER LASER
PUNCH PRESS
PLASMA MACHINE
SHEARS
We offer innovative solutions to increase your productivity
ONTARIO - EASTERN CANADA3980 Chadburn CrescentMississauga, ON L5L 3X4Tel: 905-820-3232Fax: 905-820-3234
WESTERN CANADAWestside Service Ltd4406-58 St. SouthLethbridge, AB T1K7E2Tel: 403-380-5047Fax: 403-380-5048
FLEXIBLE COIL PUNCHING LINES
Quality | Service | Value | www.ferricmachinery.com
Page 2 Clue November, 2014
2783 Portland Dr. Oakville ON L6H 6M6Tel: 905-829-1579Email: [email protected] Website: www.smtcl.com www.smtcl.ca
Manual Lathes Clearance Sales!
AH110 – Automatic Horizontal Boring & Milling Machine
Spindle Diameter: 4.33” Spindle RPM: 8-1100 Main Motor Power: 20hp Work Table Dimensions: 49”x43.3” X/Y/Z Axis travel: 63”/47”/55” W/U Axis travel: 23.6”/7” Max Table Load: 11000 lbs
S1-262A/3000 Hollow Spindle Lathe
Max Outer Dia. of Pipe: 13.39” Max Swing of Bed: 17.7” Spindle Bore: 13.98” Power of Main Motor: 24.75hp Centre distance: 18” Machine dimensions: 225”x78”x64”
S1-245B/1500 Hollow Spindle Lathe
Max Outer Dia. of Pipe: 15.75” Max Swing of Bed: 9.44” Spindle Bore: 24.75hp Power of Main Motor: 60” Machine dimensions: 225”x78”x64”
CA6236/1000 Manual Lathe
Max Swing Diameter over bed: 360mm Max Swing diameter over carriage: 210mm Max turning length of bed: 1000/900mm Spindle range(forward): 37-1600r/min Spindle range(reverse): 102-1570r/min Main motor power: 4kw
TPX6111C/3 Manual Boring Mill
Spindle Diameter: 4.3” Spindle RPM: 8-1100 Main Motor Power: 20hp Worktable Dimensions: 42.2”x43.3” X/Y/Z Axis Travel: 62.9”/47.2”/55” W/U Axis Travel: 23.6”/7”
Spindle Bore: 13.98” Power of Main Motor: 24.75hp Centre distance: 18” Machine dimensions: 225”x78”x64”
HTC2050 – Horizontal Turning Centre
BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE
MAXIMART BEDMILL
DRILLMASTER RADIAL DRILL
HEAVY DUTY LATHES
Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders
NEW MACHINES“From Stock”
S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel
7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC
26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing
Special Package Includes• Fagor 2-Axis DRO• Machine Vise• Clamping Kit
40” x 26” Fagor Control 30” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control
POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2
Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca
OVER 30LATHES
IN STOCK
OVER 40MILLS
IN STOCK
2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40
Clue November, 2014 Page 3
BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE
MAXIMART BEDMILL
DRILLMASTER RADIAL DRILL
HEAVY DUTY LATHES
Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders
NEW MACHINES“From Stock”
S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel
7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC
26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing
Special Package Includes• Fagor 2-Axis DRO• Machine Vise• Clamping Kit
40” x 26” Fagor Control 30” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control
POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2
Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca
OVER 30LATHES
IN STOCK
OVER 40MILLS
IN STOCK
2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40
Page 4 Clue November, 2014PAGE 4 CLUE, October 2014
63 Maplecrete Road, Concord, Ontario, L4K 1A5 Canada
Tel: (905) 669-7507 ! Fax: (905) 669-7512e-mail: [email protected] ! web: www.tradermachinery.com
BENDERS, HYDRAULIC2-1/2" SOCO, SB-63NCMP (2005), Hyd. Mandrel Type, Touch Screen PLC Ctl5-1/2" ENERPAC, Hyd. Pipe bender, w/asst’d tooling
BORING MILLS, CNC, HORZ, FLOOR5" GIDDINGS & LEWIS, X-36’ Y-14.7’, Mitsi S60 control
BORING MILLS, HORZ, TABLE3" MONTI, MB S-75, X-64" Y-40" Z-40", 31"x 47" table3-1/2" PBR, 37"x 47" tbl, 48" vert, 60" F-B, DRO, Mint!4" TOS, W100, 4-axis Fagor DRO (Installed 2012), 24" Facing head
BORING MILLS, CNC, HORZ, TABLE5.1" SNK, NB130 PE 3.5 (2009), Table Type, Fanuc 16iM, CTS, 60 ATC, Vert. head
Attach’s
BORING MILLS, VERT63"sw TOSHIBA, TMC-13(3), CNC, C-axis w/ Fanuc 32i78.7" TOSHIBA, TUE-20 (2001), CNC, Fanuc 18T, max Sw. 93"157.5" Sw STANKO, Dist. Under rail 108", 240 Hp, Installed as a New Mach. 1998157.5" Sw STANKO, Dist. Under rail 88.42", 168 Hp, table rebuilt 2009197" Sw GRAY, Dist. Under rail 102", 125 Hp
BRAKES, PRESS30 to 3000 Ton "NEW" ACCURPRESS Models CNC50 Ton x 4’ “NEW” ACCURPRESS, Absolute SF350-4, CNC, 18” Opening, 8” stk, 13” throat55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis70 Ton x 10’ ALLSTEEL, Hyd.75 Ton x 10’ "NEW" ACCURPRESS, CNC130 Ton x 10’ "NEW" ACCURPRESS, CNC130 Ton x 12’ ACCURPRESS, 2-Axis130 Ton x 14’ ACCURPRESS, ETS3000 (2005)200 Ton x 12’ "NEW" ACCURPRESS, CNC235 Ton x 12’ ACCURPRESS, Accell 523512 (2006), Mint!, Fully Loaded250 Ton x 12’ "NEW" ACCURPRESS, CNC300 Ton x 16’ PACIFIC, Hyd. FOPBG, Light Curts, 4-way die, Cylinders re-done300 Ton x 20’ ALLSTEEL, Hydraulic400 Ton x 20’ UNIVERSAL, Hyd, Flush floor design
DRILLS, COLUMN & BENCH1-3/8"cap "New" DRILLMASTER, Z5035, Geared Head
DRILLS, RADIAL3’ arm "New" TONE FAN, RD-9003’ Arm OOYA, 1500rpm, w/work table3’ Arm SUNLIKE, 1500rpm, w/work table9’arm SHENYANG, Box table
EDM, CONVENTIONAL NC/CNC50 Amp ARISTECH, CNC, Sinker, 25.6"x 13.8" table
GRINDERS, CYLINDRICAL5"x 13"JONES & SHIPMAN, 1212E
GRINDERS, SURFACE, RECIPROC6" x 18" "New" KENT, KGS-2006"x 18" CIM, Manual6"x 18" LIAN FENG, Manual20"x 13’ SNOW, Hydraulic
IRONWORKERS55 Ton "NEW" MAKO, Universal, 5"x 5"x 3/8" angle
LASERS2600 Watt TRUMPF, L2530 (1999), 50"x 100", Siemens 840D, Dual pallet2800 Watt BYSTRONIC, Bystar 3015-2 (1998), 5’x 10’, w/ Tube cutting attachment3000 Watt TRUMPF, L2530 (1998), 4’x 8’3000 Watt BYSTRONIC, Bystar 2512 (2002), 4’ x 10’3200 Watt TRUMPF, Lasercell, 5-Axis4000 Watt AMADA, FO3015 (2002), 5’ X 10’, w/Shuttle table5000 Watt TRUMPF, L3050 (2003), Linear laser, 5’x 10’
LATHES, ENGINE12" x 40" "New" MORTON, F1900-AEG (2001), Single Phase13"x 40" COLCHESTER, Master 2500, 5HP18" x 60" "New" POWERTURN, 46020"x 40" PROSTAR, 6250, 3 & 4 Jaw chucks, Steady & Follow40"x 120" JHS United, $-Jaw Chk, (2) Steady Rests63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe
LATHES, N/C & CNCDMG MORI, Sprint 65 Siemens (2011), 2 Spdl., 3 Turret, 1,581 Spdl. Hrs.OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2" Bar capMAZAK (2006), Quickturn Nexus 450-II, 33.27"sw, 80" Mach. Length
HYUNDAI KIA, SKT250SY (2010), Fanuc 18T, Live tooling, Sub Spdl.,10"ChkHARRISON, Alpha 400, 16"sw x 52"cc, Fanuc 2-1/8" bore22"x 79", WAFUM, 12" 3-Jaw Chk, steady rests, Fagor 8050TC26.8"Sw, 41.2"ctrs, GILDEMEISTER, CTX510 (2004), Fanuc 21iT, 10"chk27"Sw, 50"ctrs, GILDEMEISTER, CTX600 Linear (2002), Heidenhain iTNC, 15"chk
MACHINING CTRS, HORZTOYODA, FH100 (1989), Twin PalletMAZAK, H500/40, X-27.9" Y-18" Z-20.7", Mazatrol M32 controlMAZAK, H500/50 (1987), X-28" Y-25.6" Z-25.6"MORI SEIKI, NHX-5000 (2012), X-28.7" Y28.7" Z-34.6", Installed 2013
MACHINING CTRS, VERTDECKEL MAHO, DMU50T, 3 + 2, CNCBOSTOMATIC, BD18-1 (1999), Z-17.7" Y-11.8" Z-17.7", 10,000rpm, ATC 18, CAT 20MATSUURA, RA-2G (2000), X-26" Y-18.1" Z-19.02", YasnacLAGUN, VMC 3516 (2000), X-30" Y-16" Z-20", Dynapath Delta CNC ControlFADAL, VMC4020 (2005), X-40" Y-20" Z-20", Fanuc 18i-MB5FADAL, VMC4020FX, X-40" Y-20" Z-20", Fanuc Oi-MCOKUMA, ES V4020 (2001), X-40" Y-20" Z-20", OSP U10 Control, 40 taperCINCINNATI, Arrow 1000, X-40" Y-20" Z-22", Acramatic 2100, CTSHAAS, VF3 (2011), X-40" Y-20" Z-25", 5-Axis Rotary & Tilting, 10,000rpm, CAT 40FADAL, VMC4020, X-40" Y-20" Z-28", CNC 88HSBRIDGEPORT HARDINGE (2007), X-40" Y-24" Z-24", Fanuc 18iMBOKUMA, MC-50VA, X-41.3" Y-20" Z-22", OSP7000 Control, 50 tprOKK, MCV-560 (2000), X-41" Y-22" Z-22"
MILLS, CNC12"x 51" TOS, FV-30 (1999), Heidenhain TNC-310 ctl, 40 taperX-22" Y-20" Z-18" DECKEL, FP4
MILLS, UNIVERSAL12"x 55" CMC, FU-2, Vert/Horz, 6.5hp
MILLS, VERTICAL9"x 42" FIRST, LC 1-1/2 VS, DRO, P/F on X, Power Drawbar9" x 49" "New" MAGNUM-CUT, VM-2V, 3hp10"x 50" FIRST, LC-20VS, Fagor 2-Axis DRO, 5HP, 40 Taper10" x 54" "New" MAGNUM-CUT, VM-4V, 40 Taper, 5hp17"x 78" TOS, FA5B-V, 50 taper, 20 Hp
PRESSES, OBI80 Ton ROUSSELLE, 8B-48, 48” x 22” Bed, OBI80 Ton BROWN BOGGS, 18 LJA, A/C & Brake, 36"X 25" bed80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x 36"bed
PRESSES, STRAIGHT SIDE250 Ton BROWN BOGGS, SS2-250-72-39 (2000), 39"x 72" bed, 6"stk800 Ton BLOW, SC2-800-96-60 (1998), 96"x 60" bed, 16"stk, 20-40spm, Like
New!
PUNCHES, TURRETSTRIPPIT, FC1000R (1994), Fanuc Control
30 Ton EUROMAC, CX1250/30 (2000), CNC
ROLLS, ANGLE BENDING2"x 2"x 3/16" "NEW" TAURING, SAF DS 50HV, Hydraulic2"x 2"x 3/16" SAHINLER (2008), assorted tooling
ROLLS, PLATE BENDING, INIT. PINCH1/2"x 10’ ROUNDO (1997)
SAWS, BAND, HORIZONTAL10"x 15" "NEW" ACRA, Speeder FHBS-250V
SAWS, BAND, VERTICAL28" Throat T-JAW, 700C, w/Blade Welder & Grinder
SHEARS, POWER SQUARING3/8"x 8’ ACCURSHEAR (1998), Hydraulic
TABLES, ROTARY12-1/4" KITIGAWA, TS320R, w/Tailstock, 3-7/8"Bore
MISCELLANEOUSBarfeeder SPACESAVER, 4’ SMW, Autoload 12.65Magazine Barfeeder 4’ SAMECA, MBF1000 (1998), Auto LoadingBarfeeds LNS, Servo S2 & S3, Late models, w/Remote pendant, ExcellentHoning Machine SUNNEN, MBB-1650, Manual, Asst’d Tooling & CabinetKeyseater DAVIS, No.5, Cap. Keyway cutting 1/16" to 1-1/2"Notcher (NEW) BOSCHERT, 5/32" x 8-7/8" x 8-7/8", HydraulicSpot Welder 20 KVA, SIPMig Welder 200 Amp, LINCOLN ELECTRIC, Power Mig 2000Wet type Sander 36" TIMESAVER, No.137-IHDWire Machinery "NEW" METALEX, WT250, Wire Nibbler
NEW
Clue November, 2014 Page 5
WE BUY SINGLE MACHINES OR COMPLETE PLANTS
63 Maplecrete Rd.Concord, Ontario L4K 1A5Tel: (905) 669-7507Fax: (905) 669-7512www.tradermachinery.com
NEW ACCURPRESS MODELSCNC PRESS BRAKES
HYUNDAI KIA, No. SKT250SY, 2010, W/ Live tool,Sub. Spindle, 10” Chk., Fanuc 18T
MORI SEIKI, 2012, NHX5000, 28.7”X, 28.7”Y, 34.6”Z, CNC Horizontal machining Center, Mori Seiki M730 BM
41.3”X, 22.04”Y, 22.04”Z, OKK, 2000,CNC Vertical Machining Center, Fanuc 16iM
40”X, 20”Y, 25”Z, HAAS, VF3, 2011, 5-AXIS, W/HAAS TR210 TRUNNION TABLE, LOW HOURS!
See Demos on the highly successful leader in precision forming Accurpress Press Brakes.
Page 6 Clue November, 2014
Page 8 / Steel Marketplace / JULY 2007
�
• APPRAISALS • FINANCING • • TRADE-INS • TOOLING •
• SHIPPING • INSTALLATIONS • • TRAINING • SOFTWARE •
VISIT US AT:www.jordancraigmachinery.com
TO VIEW A COMPLETE LIST
Check out our website for Photos, Specifications and a more complete inventory atwww. jordancraigmachinery.com
JORDAN CRAIG MACHINERY INT’L LLC, P.O Box 737, New City, NY 10956Tel: 845-398-0073 [email protected]: 845-398-0074 www.jordancraigmachinery.com
2500 WATT MAZAK STX510 MKII HYBRID LASER, APPROX. 41,000HRS, MFG:2000
STOCK #10110
MAZAK 1500 WATT STX48MKII LASER, MAZATROL L32B, 43,000 HOURS, MFG:10103
STOCK #10103
242 TON X 167” AMADA HFE2204/7, PRESS BRAKE, OPERATEUR, MFG:2005
STOCK #10059
33 TON AMADA PEGA 367, TURRET PUNCH, O4PC, 60” X 72”, 44 STA., 2 A/I, MFG:1992
STOCK #9987
BYSTRONIC BYSPEED 3015, LASER, 5200 WATT, 5’ X 10’, MFG:2005, STOCK #10072
37” TIMESAVER “3100 SERIES” COMBINATION BELT/BRUSH “WET” FINISHING MACHINE,
MFG:2006 STOCK #10046
33 TON, AMADA, VIPROS III 3510 NT,TURRET PUNCH, 58 STA., 4 A/I,
MFG: 2004 STOCK #9920
33 TON, AMADA, VIPROS 358 KINGII, TURRET PUNCH, FANUC 18P, 4 A/I.MFG:1999 STOCK
#10098
88 TON, AMADA, RG80, PRESS BRAKENC 9EXII 3-AXIS,MFG:2000
STOCK #10033
2000 WATT, CINCINNATI CL-6, LASER, 5’ x 10’ DUAL PALLET,FANUC C2000,CHILLER
MFG:2000 STOCK #10019
10’ x 1/2”, ROUNDO, No. PS255, HYDRAULIC INITIAL PINCH PLATE ROLLS, MFG:1997
STOCK #9957
190 TON, TRUMPF, V170, PRESS BRAKE, DELEM, PROG. Z1,Z2, CROWNING,
CLAMPLING, MFG:2000 STOCK #10013
Clue November, 2014 Page 7Page 8 CLUE, November 2012
131 Citation Dr, Units 17 & 18VAUGHAN-CONCORDONTARIO, L4K 2R3Tel: (905) 738-8730
Fax: (905) 738-5148
e-mail: [email protected]:www.sabito.com
CNC MACHINE TOOLS * PRESS BRAKES * SHEARS * TURRET PUNCHES * BENDING ROLLS * IRONWORKERS * NOTCHERS * BENDERS
WE BUY & SELL SINGLE MACHINES OR COMPLETE PLANTS
APPRAISAL SERVICES - AMEA & USPAP CERTIFIED
BORING MILLS, HORZ, TABLE
3.14" UNION, BFT 80/2
5" G & L 450 Series MC50, Fanuc CNC
BORING MILLS, VERT
36" BULLARD, VTL
88"dia STANKO, 1525, 100"sw, 70"v, 1.6-80rpm, 2 hd
10’ dia NILES, F120, 128"sw, 24"stk, 6’rail hd trav, 50hp
BRAKES, PRESS
35T x 8’ DIACRO, 16-96, CNC BG, 9"SH, 3"adj, 9"thrt, 3hp, 220v
60T x 6' WYSONG THS60-72, Hyd, Automec 300, CNC, Light Guards
70T x 10’ NIAGARA, HD-70-8-10, 102"bh, 15"SH, 7"stk, 24"BG
75T x 10’ DIACRO, 75-10, Hydro-Mech, 3"stk, 8"adj, 12"SH, 8"thrt
90T x 10’ PACIFIC, J90-1, Hyd, 7"stk, 6"thrt, 6"SH, 2-Axis CNC, 15hp
135T x 8’ CINCI, Series 5, 102"BH, 3"stk, 5"adj, 12"SH, 8"thrt, 30spm
135T X 12' ATLANTIC HD135-12-10 Hydraulic
230T x 13' ADIRA Model QHD-20040 Hydraulic (1997)
230T x 13' ACCUPRESS Model 50235 Accell CNC (2006)
DRILLS, RADIAL
3’ Radial arm drill
6’ STANKO, 2M55, w/ Box Table
1-1/2"x 48" TECHNIDRIL, Series 200 Gundrill
GRINDERS, CYLINDRICAL
20" X 48" KARSTENS K29, Universal Cnc
GRINDERS, ROTARY
48" SHIBAURA, KRT-8D
GRINDERS, SURFACE, RECIPROC
6" x 18" BROWN & SHARP, Hydraulic
8"x 24" JAKOBSEN, Hydraulic
GRINDERS, UNIVERSAL
20"x 39" TOS, BHU 50A/1000
LATHES, ENGINE
20"x 39" PROSTAR 6250
20"x 120" VDF
GEMICO, 1760
HITACHI SEIKI, 7D, 6-1/4"hole
LATHES, N/C & CNC
GOODWAY GT-25, CNC (1999)
TAKISAWA, TS-20, CNC
WASINO, LJ-63M (1988)
OKUMA, 14.1" x 23.6" LT25 (1999), 4-Axis
VDF, DN 820, 32"x 72", CNC
VDF, V800, 42"x 72", CNC
MACHINING CTRS, HORZ
MITSUBISHI, MH-50C (1989), 158 ATC
MAZAK Integrex E-1060V/8II (2010)
MACHINING CTRS, VERT
MONARCH VMC-45 CNC (1989)
MATSUURA MC-800 VF CNC (1995)
DMG DMU 60T CNC (2002)
EUMACH, DVM-5030, Double Column CNC Center, X-20.4" Y-12.2"
Z-27", ATC-180
LEADWELL, MCV 760 XL
HERMLE, C800U (2001), 5-axis
DOOSAN, REVO 4020 (2006), CNC
MACHINING CTRS, UNIV
HURCO C-40-U, 5 AXIS CNC (2004)
MILLS, UNIVERSAL
14"x 44" HECKERT, FSS 440, V1/2
KAO-FONG, KF-G-450
HURON, NU3
MILLS, TURRET
9"x 42" KONDIA, Vertical
9"x 42" DARBERT, Vertical
9"x 49" TOS, FNK 25
9"x 49" RACER TECH, c/w Fagor DRO
9"x 49" FIRST, LC 18 VSS, Newall DRO
MILLS, VERTICAL
17 11/16" x 74 13/16" Fortworth VBM 4V (1995)
20" x 94" CINCINNATI, #5, X-50" Y-18" Z-16", #50, 14-1400rpm,
25hp
24" x 98" TOS, FC63V, X-63" Y-23.62" Z-23.62", 3-Axis Heid DRO
HAAS, MDC500, CNC, (2006), Double Pallet
PRESSES, GAP FRAME
45 Ton BLISS, C-45, HS, 29" x 19"bed, 2-1/2"stk
PRESSES, OBI
75 Ton MINSTER, No.7, c/w AC
250 Ton NIAGARA, 8"stk, 22-1/2"SH, 35"x58", 35spm, A/C
320 Ton MORI (2001), Fine Blanking Press
PRESSES, STRAIGHT SIDE
250 Ton BLISS, 12"stk, 38"SH, 6"adj, 30spm, 440v
250 Ton SMERAL, SSDC
300 Ton DANLY, SSDC, 24"stk, 39.5"SH, 20spm
300 Ton ROUSELLE, 102x48, 14"stk, 31"SH, 8"adj, 35spm
300 Ton USI CLEARING, 16"stk, 52"SH, 20"adj, 20spm, 40hp
300 Ton VERSON, 12"stk, 30"SH, 10"adj, 20spm, 60hp
350 Ton BLISS, 16"stk, 12"adj, 38-1/2SH, 30spm, 15"bolster
500 Ton BLISS, 12’stk, 40"SH, 25spm, 75hp
PUNCHES, TURRET
22.5 Ton AMADA, Virpos 2510 (2000), CNC
33 Ton AMADA, Apelio 357 (1992), 45stn, 4-Auto, Fanuc 04PC
33 Ton AMADA, Vipros 357, CNC, 58 stn, 2 Auto, Fanuc
ROLLS, ANGLE BENDING
2"x 2"x 3/16"TAURING, Alpha 40, CNC
ROLLS, PLATE BENDING
16ga x 4’ TENNSMITH, SR48P, 3"roll, Slip, 3/4hp
12ga x 4’ NIAGARA, L351P, IP, 4 Roll, Manual Adj & Drop,
10ga x 5’ WDM (2008), Initial Pinch
SAWS, BAND, HORIZONTAL
HYD-MECH, S-20 M Series 111
DO-ALL, C-916A
SAWS, BAND, VERTICAL
10" x 15" RAM, Roll-in
36" x 13 DOALL, 50-5200 ipm, Welder, Grinder
Can-Saw 115, Roll-in
SHEARS, POWER SQUARING
1/8"x 36" Mechanical
1/4" x 10' Haco Model TS 3006 Hydraulic (1990)
1/4" x 10’ VIMERCATI, SI 3006 (2004), Hydraulic
1/4" x 10’ CINCINNATI, Hyd, 36" FOPBG, v/Rake, Sq Arm, 15hp
1/4" x 10’ CINCINNATI, 2CC10, Mech, 36"FOPBG, 60spm
1/4" x 12’ NIAGARA, Hyd, 36" FOPBG, 50"sq arm, 20spm, 15hp
3/8" x 10’ CINCINNATI, 24"ROMBG, 50spm, Sq Arm, 20hp
3/8" x 10’ CINCINNATI, 1510, 42" FOPBG
3/8" x 12’ CINCINNATI, 4312, Mech, 40" FOPBG, 18"throat, 50spm, 15hp
1/2" x 10' ADIRA Model GHS-1330 Hydraulic (2005)
1/2" X 10' HACO HSLX 3013 Hyd, .39"FOPBG
1/2" x 12’ CINCINNATI, 48"digital FOPBG, 18"gap, 40spm, 20hp
1/2" x 12’ CINCINNATI, 4H12, 12’sq arm, 2 front suppts, 25hp
5/8" x 8’ CINCINNATI, Mech, 48"FOMBG, 8’sq arm, 40spm
5/8"x 8’ CINCINNATI, Mech, ROMBG
5/8" x 10’ CINCINNATI, Hyd, 36"FOPBG, 18"gap, 14spm
5/8" x 12’ CINCINNATI, Hyd, 48"FOPBG, DRO, 18"gap, Power Rake
MISCELLANEOUS
Combination Punch & High Def, W.A. WHITNEY 3400 RTC 680-850
CMM Machine ZEISS Contura G2 Aktiv (2010)
Feeder IEMCA Prodigy 547, 6ft bar length.MAG CAP
15.75"(3/16"-2")
Press H&A 60 Ton DAKE
Comparitor 30" Optical, JONES & LAMPSON, DRO
Phase Converter RONK, X6
Coil Line AIDA LFG 600R, Width 2.8"-23.6".Thick.02"-.177"
INDUSTRIAL MACHINE TOOLS & APPRAISALS
MACHINERY INC.
Clue November, 2014 Page 9
A U C T I O N S • L I Q U I D AT I O N S
F I N A N C I N G • A P P R A I S A L S
9 0 5 . 6 6 9 . 8 8 9 3i n f i n i t y a s s e t s . c o m
Like us at: facebook.com/Infinity-Asset-Solutions-Inc
Follow us at: twitter.com/InfinityAssets
SCHIESS Vertical Boring Mill Model 2K 300/500
ASQUITH 6" Floor Type Horizontal Boring Mill PACIFIC Press Brake Model 750-18
Swing 196.8"1 of 2 VBM’s
6" Spindle
18' x 750 Ton
1 of 2 Boring Mills
1 of 13 Lathes GEMINIS Engine Lathe Model GE-1400-S
As Appointed By TheTrustee In Bankruptcy
Lakehead Marine & Industrial Inc.Complete Shipyard Featuring Large Capacity Turning, Boring & Bending
401 Shipyard Road, Thunder Bay, Ontario, Canada
Owner Retiring HTE Tooling Inc.High Tech Tooling Manufacturer 266 Rutherford Road South, Unit 20, Brampton, Ontario
Auction: Thursday November 20, 11:00 AM (ET)Featuring: TOS SN50A Lathe, (2) SAJO Mills, (2) COOPERMATIC Oil Separation Units, Twist Drill Reamer Grinders, CINCINNATI &
BROWN & SHARPE Tool & Cutter Grinders, Surface Grinders, Machine Tool Accessories, Lockers, Pallet Racking, Office Furniture & More.
Auction: Wednesday November 12, 10:00 AM (ET)
Inspection: Tuesday November 11, 9 AM to 4 PM (Over 1,000 Lots!)
Bid Live Onsite & Online Via
Max 70.8" x 472.4"
Sale In Conjunction With
Page 10 Clue November, 2014
Bringing the Best Machine Tools to North America
GERMade in Spainwww.germh.com
Cylindrical Grindersup to 20’, 6 Ton between centers;up to 40” swing
Surface Grindersup to 20’ x 43” x 26” (height) grinding capacity;4.5 Ton part weight
Vertical Grindersup to 100” x 30” (height) grinding capacity;4 Ton part weight
Surface Grinders with Rotary Tableup to 60” x 20” (height) grinding capacity; 2.5 Ton part weight
Rebuilding Unique Machine Tools
Schiess VBM Rebuilt by DiPaolo160Ó table30ʼ swing110Ó part height
Toshiba HBM Rebuilt by DiPaolo6Ó spindle 100Ó “Y”30ʼ “X” 71Ó “W + Z”
7040 Fir Tree Drive, Mississauga, ON L5S1K6, CanadaToronto Office: 905-676-9265 USA Office: 412-421-1211www.dipaolocnc.com [email protected]
Clue November, 2014 Page 11
7040 Fir Tree Drive, Mississauga, ON L5S1K6, CanadaToronto Office: 905-676-9265 USA Office: 412-421-1211www.dipaolocnc.com [email protected]
USED MACHINERY
OTHER SERVICES» On-Site spindle taper grinding» Machine tool calibration and metrology» Mechanical, Electrical and CNC field service» Installations and plant moves» Spare parts including exchange programs» Authorized distributor for Heidenhain, Fagor, Fanuc FA, Siemens and Renishaw.» Certified Appraiser on staff» Way Grinding
Subscribe to our mailing list
Vertical LathesBERTHIEZ
OLYMPIA
SCHIESS
BULLARD
OKUMA + HOWA
62" table, 75" swing, Model TVM 125, 1997, Fanuc 15T, 95kw main spindle, Live tooling, tool and part probes, very heavy duty, Stock No. 407960” table, 70” swing, Model V60, New in 2001, rebuilt in 2013, Fanuc 18iTA control, 60” 4 jaw hydraulic chuck, 12 position ATC, chip conveyor, stock 427840” table, 55” swing, Model 14DKE100, updated electrics, fresh paint, Stock No. 4071Man-Au-Trol, 42” table, equipped with side head, from an aerospace facility, gently used, Stock No.4205ACT 2SP-V3, 10” chucks, twin spindle, Fanuc 0TT, 12 position turrets, 30HP spindles, Stock No. 4219
Horizontal Lathes“NEW”
“NEW”
MAZAK
RD&D
SAFOP
OKUMAHITACHI
MORI SEIKI
OKUMA+HOWA
NAKAMURA TOME
20” x 60” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4” spindle bore, splash guard, steady rest, stock 403920” x 80” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4” spindle bore, splash guard, steady rest, 2 available, stock 4036 and 4037Slant Turn 40N-ATC Millcenter 1000, Fanuc Control64" x 170", sliding bed type gap lathe, 16" hole through spindle, GN10 CNC control, Stock No. 384963" x 236", C axis, live tooling on programmable turret, Siemens 840C CNC control, Stock No. 379115” x 36”, LU-15 CNC Lathe, 1995, Stock No. 358029” swing, Turret Lathe, 6.25” hole through, Stock No. 318327” x 35”, Model SL6, Fanuc 6T, 1981, equipped with tailstock, 12 station turret, Stock No. 417311” x 13” CNC Lathe, Model HJ-28, 18” swing, Fanuc 21iTB Control, 8 position turret, 2004. 2 Available. Stock 4156 & 4157SC300, 1998, Fanuc 21 control, 10” hydraulic chuck, 12 position turret, Stock No. 4224
Surface & Blanchard GrindersARTER
SHIBAURARotary Surface, Horizontal Spindle, Stock No. 3827
48”, Model No. KRT-8D, Blanchard Style, Stock No. 3684
MiscellaneousIEMCA
DANDREA
DO-ALL
AMADA
ARCHDALE
PRATT & WHITNEY
AMERICAN
PFAUTER
Bar feeder, 2.55" bar capacity, 3600mm bar length , Stock No. 4066
CNC facing head
Horizontal Bandsaw, Model C-916A, Stock No. 3466
Punch Grinder, Stock No. 3463
Granite Table, 150" x 150", Massive!, Stock No. 3418
Radial Drill, Stock No. 4211
Jig Grinder, Model No 20, Pratt and Whitney rotary table,
from an aerospace facility, gently used, Stock No.4215
Radial drill, 5’ arm, 17” column, 5MT spindle taper, power
quill travel, Stock No. 4237
Gear hobber, Model P900 Turbo, 36” max workpiece
diameter, 2.5 max DP, 24” axial travel, max hob 7-3/8” dia x
9” long, Auto hob shift, swing away tailstock, change gears,
Stock No. 4253
Machining CentresTOS
LEADWELL
BRIDGEPORT
12” x 51”, Model FV 25, FAGOR CNC control, box ways, priced to sell, Stock No. 3710
20” x 30”, Model MCV-760XL, FANUC 0 CNC Control, 20 position ATC, Stock No. 3453
20” x 40” CNC VMC, Model VMC1000/22, 6000 RPM, 40 taper, 1998, Stock 4159
Cylindrical GrindersSCHAUDT
B&S13” x 27”, Universal Heavy Duty, Stock No. 3826
10” x 48”, Brown & Sharp, Model 1048 Microstatic, Stock No.3825
Horizontal Boring MillsTOS
TOS
UNION
SCHARMANN
W100, 1996, partially reconditioned, DRO, Stock No. 4268
WD130, 130mm spindle, Floor type boring mill, FAGOR 8055 CNC, 232” x 97” travel, 90” x 84” G&L table, linear scales, under power, Stock No. 4353
80mm Spindle, Model BFT 80/2, cleaned, cycled and painted. Stock No. 3408
125mm spindle, Model Ecocut, Siemens 880 Control, 3000 RPM, 50 HP spindle, built in CNC Facing head, 2 pallets, 50” x 63”
Milling MachinesHECKERT
DARBERT
16” x 63”, Model No. FSS 440 V1/2, Heavy Duty, Universal, Stock No. 3686
9” x 42”, Turret Style mill, Stock No. 3458
Page 12 Clue November, 2014
• Table size ranging from 2500 to 6000 mm • Machines large and heavy workpieces • High efficient machining • Rigid table bearing using hydro-static guiding principles • Precise table positioning (C-axis) and rotary tool drive with high power output • Siemens or Fanuc Control systems • Can be equipped to use high-pressure coolant
• High rigidity and stability • Functional design for easy maintenance • Short delivery time from manufacturer • Siemens or Fanuc control systems • Can be equipped with table positioning and rotary tool drive • Automatic exchange of turning tools and rotary tools • Ram designed for efficient and precise machining • Variable height of the working area • Possibility to perform high-pressure through tool coolant
Clue November, 2014 Page 13
MACHINERY IN INVENTORYTHE MACHINE TOOL SPECIALISTS
Full range of new and used machinery
Okuma CNC Lathe, ES-L8, 8 Station Turret
Accurpress, Model 713010, ETS 3000 CNC Control
Haas VMC, MV-6
VISIT OUR WEBSITE TO VIEW OUR EXTENSIVE INVENTORY
We will buy your surplus machines or complete plants
Trumpf CNC Punch, TC2000R, Tooling
Microcut Challenger Lathe, BNC-1640 Feeler VMC 600 + 800, Six in Stock
Haas VMC, VF-0Milltronics Lathe, ML26 x 80, live tooling
Page 14 Clue November, 2014
• Reach more people faster
• Email over 6500 companies using CLUE’s highly targeted industry list
www.cluemachines.com
Call today: 905-528-7765 or email us at: [email protected]
Over 6500 Names
CLUE MACHINERY ADVERTISER ONLINE
AuctionsPlant Closings
Liquidation SalesMultiple Machines
Great for
EMAILBLAST
LET US MANAGE YOUR MACHINES ONLINE
M A C H I N E R Y
Clue November, 2014 Page 15PAGE 30 CLUE, December 2013
AIR COMPRESSORS
JUN AIR 15 litre 120psi
DRILLS
KING
ALLEN drill press, 3ph
ROCKWELL
YAMAGUCHI
ARBOGA (G1304) Bench top drill
AMCO (Z5025A) Gearhead drill
TOA (HHK-EK) R/A drill, 600v
HERBERT 15" 3ph
FORK LIFT TRUCKS
YALE 3000lb propane
TCM 10000 lb Propane, 3stge mast
Assorted Pallet Trucks
HYSTER 15000 lb propane
GRINDERS
HARIG (612) Surface grinder
GRINDERS, MISCELLANEOUS
BALDOR 3/4hp pedestal grinder
THOR Pedestal grinder
LATHES, ENGINE
CHIEN-YEH 14"x 36" 24" gap
CLAUSING COLCHESTER 15"x 50"
TOS (SV18RA) 15"x 60"
LANG 16"x 42"
LODGE & SHIPLEY 16"x 60" 220v, single ph
VOEST 17"x 60"
MILLS, UNIVERSAL
HONEYWELL Light curtains
HASCO 9"x 42" R8 taper
SIMA ROSSI (VO) 10"x 48" 40 taper
FIRST (LC-20VSG) 10"x 51" 40 taper
TOS (FA3AV) 12"x 54" 40 taper
PRESSES
ARBOR (#2)
GREENERD (#3a) Arbor Press
JET (#3) Arbor Press AP3
BUFFALO 100T H press
ROLLS
B&B 36" x 18ga Hand Rolls
SAWS, BAND, HORIZONTAL
TOYANG 4"x 6" 110v
CRAFTEX 10" table saw
GREENLEE (1346) 7"x 10" single phase
LIAN FENG 12"x 16"
SAWS, BAND, VERTICAL
MACC (350) 2spd, Cold cut saw
ROLLIN 11" capacity
CLIPPER (BBC156) 14" Concrete saw
WILSON 28" Vertical Woodworking band saw
GROB 36" band saw
RIGID (MS1065LZA) 10" compound mitre saw
MAKITA 14" Chop saw, single phase
SHEARS
PEARSON 3/8"x 10’ hyd shear, w/ squaring
arm, sheet support, FOBG
WELDERS
MILLER (Big 30A) diesel welder
MILLER (250P) Stick welder
AERCOLOGY’S WELDAIR (WA1000CP)
Smoke eater
THERMAL ARC (PAK 5Xr) Plasma cutter
MILLER (Coolmate 4) Water cooler
ARCWELD (G022263) 230/460/575
THERMALARC (250 Tigwave)
CANOX Arc Welder
GULLCO welding positioner
L-TEC Heliarc 250hf plus squarewave
MISCELLANEOUS
Assorted Transformers
Hone, SUNNEN 1660K, w/Tooling
Hydraulic Pump
Industrial Fan, VARY 4’ x 4’
SUNNEN (Dial) bore gauge
MITUTOYO height gauges, assorted styles
Wet Soda Blaster 38 x 41 x 38
Assorted Rotary Tables
Mag. Lathe Chuck, ECLIPSE
Assorted Demagnetisers
HILTI (DXA40 driver) w/ XHN date stamp
attachment
Bead Rolling Machine, CMZ7, 114v, single ph
Pressure Washer, PSC 600v, 3ph
Assorted Measuring Tools
Angle Plates
Torque Wrench, PROTO 600 ft/lbs
Collet sets
Assorted vises
Assorted Chain Hoists
Threading Caddy, RIGID
Recoilers, DURANT
Magnets, 800-1000kg
Hardness Testers
Pedestal Buffer, CINCINATTI 14"
Disc sander, SIEMEC 12"
JET & CM 10T chain falls, 20’ lift
Phone: 905-634-8442 Fax: 905-681-69404280 Harvester Road, Unit 5 & 6, Burlington, Ontario, L7L 5Z5
www.paulmachinery.com
131 Citation Dr, Units 17 & 18
VAUGHAN-CONCORD
ONTARIO, L4K 2R3Tel: (905) 738-8730
Fax: (905) 738-5148
e-mail: [email protected]:www.sabito.com
MACHINERY INC.
CNC MACHINES CNC MACHINES CNC MACHINES CNC MACHINES CNC MACHINES
APPRAISAL SERVICES - AMEA & USPAP CERTIFIED
Late Model, Pre-owned, CNC Machine Tools.MACHINING CENTRES, VERT
DMG, DMU, 60T CNC (2002)
MATSUURA, MC-800 VF CNC (1995)
MONARCH, VMC-45 CNC (1989)
LEADWELL, MCV 760 XL
HERMLE, C800U (2001), 5-axis
OKUMA, MC-4VA (1984)
MATSUURA, ES-800, CNC (2005)
MACHINING CENTERS, HORZDAEWOO, DMH 400 (2000)
MAZAK Integrex E-1060V/8II (2010)
MITSUBISHI, MH-50C, 20" x 20", 158 ATC (1989)
MACHINING CENTER, UNIVHURCO C-40-U, 5 AXIS CNC (2004)
DECKEL MAHO, DMC 100 U, DouBlock 5-axis (2005)
CNC LATHESTAKISAWA, TS-20, CNC
WASINO, LJ-63M (1988)
BORING MILL, HORZ5" G & L, 450 Series MC50 Table Type, Fanuc CNC
GRINDERS, SURFACE10" x 24" THOMPSON
20" X 48" KARSTENS K29 Universal CNC Grinder
OTHER CNC MACHINESCombination Punch & High Def, W.A. WHITNEY 3400 RTC 680-850
Co-ordinate Measuring Machine, MITUTOYO, BRT 707
CNC Angle Rolls, TAURING, Alpha 40, 2"x 2"x 3/16"
CNC Woodworking Sizing System, SCHEER PA7000 (2002)
Coil Line, AIDA LFG 600R, Width 2.8"-23.6".Thick.02"-.177"
Feeder, IEMCA Prodigy 547, 6ft bar length.mag cap 15.75"(3/16"-2")
Hydraulic Press Brake, 135T X 12FT ATLANTIC HD135-12-10
CNC Press Brake, 230 Ton x 13' ACCUPRESS Model 50235 Accell (2006)
INDUSTRIAL MACHINE TOOLS & APPRAISALS
Page 16 Clue November, 2014
B1804 BENDERS, HYDRAULIC
5-1/2" ENERPAC, , Hyd. Pipe bender, w/asst’d tooling, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
B5400 BORING MILLS, HORZ, FLOOR
5" UNION, BFP130 CNC, X-180" Y-98" Z-39" W-14", c/w
Heidenhain TNC 425 4-Axis, (Boulanger Machinerie Inc
Tel: 418-428-4709, Fax: 418-428-4710)
5.12" PEGAR, AF.13 TA, X-102" Y-70" Z-95" W-45", Call for
price, (Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
5.12" TOS, WD-130, Floor type, Acu-rite DRO, Call for price,
(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
B5500 BORING MILLS, HORZ, TABLE
3" MONTI, MB S-75, X-64" Y-40" Z-40", 31"x 47" table, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
4" STANKO, , Rotary Table, ISO 50, 3-Axis DRO, (Boulanger
Machinerie Inc Tel: 418-428-4709, Fax: 418-428-4710)
4" TOS, W100, 4-axis Fagor DRO (Installed 2012), 24" Facing
head, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
5" UNION, BFT 125/5 (1976), 71"x 79", XYZ-100"x 79"x 71",
Rot tbl, fcg hd, mlg hd, Ref# 2376, (B F G Machine Tools Inc.
Tel: 780-434-7795, Fax: 780-436-0717)
B5550 BORING MILLS, CNC, HORZ, TABLE
5.1" SNK, NB130 PE 3.5 (2009), Table Type, Fanuc 16iM, CTS,
60 ATC, Vert. head Attach’s, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
B6006 BORING MILLS, VERT
39" Table SHIESS, , 4-jaws, max swing 57", Height Under rail
40", c/w side head, 7-355HP, 4axis Read out, (Boulanger
Machinerie Inc Tel: 418-428-4709, Fax: 418-428-4710)
55" Table STANKO, 1516, 4-jaws, max swing 64", Height Under
rail 45", 40HP, Side head, (Boulanger Machinerie Inc
Tel: 418-428-4709, Fax: 418-428-4710)
78.7" TOSHIBA, TUE-20 (2001), CNC, Fanuc 18T, max Sw.
93", (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
157.5" Sw STANKO, , Dist. Under rail 108", 240 Hp, Installed as
a New Mach. 1998, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
157.5" Sw STANKO, , Dist. Under rail 88.42", 168 Hp, table
rebuilt 2009, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
197" Sw GRAY, , Dist. Under rail 102", 125 Hp, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
B7000 BRAKES, PRESS
ALLSTEEL, 45-8, w/Safety Lights, used, (Neiman Machinery
Sales Inc. Tel: 905-715-7776, Fax: 905-715-7744)
ALLSTEEL, 45-8, w/Safety Lights & CNC Backgauge, used,
(Neiman Machinery Sales Inc. Tel: 905-715-7776,
Fax: 905-715-7744)
ALLSTEEL, 70-10, w/Safety Lights & CNC Backgauge, used,
(Neiman Machinery Sales Inc. Tel: 905-715-7776,
Fax: 905-715-7744)
ALLSTEEL, 65-10, (Neiman Machinery Sales Inc.
Tel: 905-715-7776, Fax: 905-715-7744)
55 Ton AMADA, FBD5020 (1996), NC9EXII 3-Axis CNC, 78.74"
O.A, Ref #10117, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
70 Ton x 10’ ALLSTEEL, , Hyd., (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
75 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
80 Ton x 8’ AMADA, ITPS080-25, CNC EMA 4-axis, (Machinery
S. Tremblay Tel: 819-477-6677, Fax: 819-477-6466)
88 Ton AMADA, FBDIII8025NT (2001), Amada AMNC-PC,
Ref# 10074, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
88 Ton AMADA, RG80 (2000), NC 9EXII 3-axis, Ref# 10033,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
88 Ton AMADA, HFB8025/8 (1998), Operateur 8-Axis, Ref#
10115, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
88 Ton AMADA, FBD8025 (1996), NC9EXII 3-Axis CNC, Ref
#10116, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
88 Ton x 8’-6" “NEW” FERRIC, Power Bend 2600-80, 3-axis,
CZ-142-04 compliant, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
88 Ton x 8’-6’6" HACO, PPM2575, 2-axis ATL 500, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 1
95 Ton TRUMPF, Trumabend V85 (2000), Delem DA65 CNC,
Prog. Z1,Z2, Ref# 9975, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
110 Ton AMADA, FBDIII 1030NT (2000), Up-Acting CNC, 122",
Ref# 10112, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
110 Ton x 13.5’ GASPARINI, , XR Backgauge, CNC Crown,
Cybelec Control, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 1
120 Ton ALLSTEEL, #120-10 (1991), 12’ OA, 8’6" BH,
Autobend 5C + tooling, (Soudogaz Tel: 418 889-2002,
Fax: 418 889-2012)
125 Ton x 12’ ALLSTEEL, , No Back Gauge, (Machinery S.
Tremblay Tel: 819-477-6677, Fax: 819-477-6466)
125TM x 4000MM FUTURA WARCOM, , CNC 6-axis, with
tooling, (Machinery S. Tremblay Tel: 819-477-6677,
Fax: 819-477-6466)
130 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
130 Ton x 12’ ACCURPRESS, , 2-Axis, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
137 Ton AMADA, HFB1254/5, NEW 1997, Operateur CNC,
165", Ref #10121, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
138 Ton AMADA, FBD1253NT (2002), Up-Acting CNC, Ref#
9978, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
PAGE 18 CLUE, November, 2014
CLASSIFIED - LISTING YOUR MACHINERY AND EQUIPMENT TODAY
LEADS TO SUCCESSFUL SALES TOMORROW
Don't Delay! Phone: (905) 528-7765 Fax: (905) 917-0222
website: www.fabtec.ca
Proactively increase Machine Tool sales for our company through both quality customer service and new customer outreach. Daily activities will include calling customers by phone (prospecting), conducting face to face meetings (sales calls), assessing customers’ needs and requirements, preparing quotations and closing sales.Job Quali�cations: A minimum of 1-2 years of experience in the �eld of Industrial Machine Tool Sales or related industry is preferred.
Machine Tool Sales EngineerSales Job Available in Quebec
Excellent Bene�ts Package
Phone: 905-676-9265Email: [email protected]
Clue November, 2014 Page 17CLUE, April 2014 PAGE 19
B7000 BRAKES, PRESS H5975 HONES, HORIZONTAL
144 Ton TRUMPF, V130X (2002), 6-axis BG, EX-Stroke
Clamping, Crowning, ACB, Ref# 9976, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 6
151 Ton SALVAGNINI, CPR135-3000 (2003), Roboformer
Bending Cell, Ref# 9521, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
176 Ton x 10’-8’4" “NEW” FERRIC, Power Bend 3100x160,
3-Axis, CZ142-04 Compliant, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
176 Ton x 12’-10’ “NEW” FERRIC, Power Bend 3600-160,
3-axis, CZ-142-04 compliant, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
187 Ton AMADA, HFE 1704S/7 (2000), Operateur 7-Axis CNC,
167", Ref# 10135, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
190 Ton TRUMPF, V170 (2000), Delem, Prog. Z1, Z2,
Crowning, Clamping, Ref# 10013, (Jordan Craig Machinery
Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
200 Ton x 12’ “NEW” ACCURPRESS, , CNC, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
200 Ton x 4M AMADA, STPC200-40,, CNC 3-axis DNC7000,
tooling, (Machinery S. Tremblay Tel: 819-477-6677,
Fax: 819-477-6466)
220 Ton x 12’-10’ “NEW” FERRIC, Power Bend 3600-250,
3-axis, CZ-142-04 compliant, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
242 Ton AMADA, HFE2204/7 (2005), Operateur, Ref# 10059,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
242 Ton AMADA, HFB2204 (1999), Operateur, Ref# 9897,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
250 Ton x 12’ “NEW” ACCURPRESS, , CNC, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
257 Ton TRUMPF, Trumabend V230 (2003), Delem DA69
6-axis, Clamping, Crowning, ACB, Ref# 9977, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 6
257 Ton TRUMPF, Trumabend V230X (2003), Delem DA69
6-axis, Clamping, Crowning, ACB, Ref# 9980, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 6
300 Ton x 20’ ALLSTEEL, , Hydraulic, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
350 Ton x 12’-10’ “NEW” FERRIC, Power Bend, XR, CNC
Crown, 2D Graphic, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
357 Ton TRUMPF, V320 (2000), Delem DA65, Ref# 10027,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
400 Ton x 14’ PACIFIC, , Hyd, 12’ B/H, very nice condition,
dismantle, $35,000, (Soudogaz Tel: 418 889-2002, Fax: 418
889-2012)
C6306 CRANES & HOISTS
4 Ton ABELL-HOWE, , Pillar Jib crane, Mot. Rotation 360 deg.,
(Levage Manco Inc. Tel: 450-638-3877, Fax: 450-638-5898)
5 Ton R.REDDY, , Top running, 48’2"spam, 20’ lifting, 2sd, Call
for price, (Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
5 Ton RICHARD WILCOX, , Top running hoist, (Levage Manco
Inc. Tel: 450-638-3877, Fax: 450-638-5898)
7.5 KM KONE, , Under running, 32’ span, 26’ lifting height,
(Machinery S. Tremblay Tel: 819-477-6677,
Fax: 819-477-6466)
15 TM KONE, , Under running, 2x7.5TM hoist, 32’ span, 26’
lifting height, (Machinery S. Tremblay Tel: 819-477-6677,
Fax: 819-477-6466)
25 TM KONE, , 45’ span, 68’ Lifting height, (Machinery S.
Tremblay Tel: 819-477-6677, Fax: 819-477-6466)
30 TM KONE, , 56’-7’’span, 75’ lifting height, remote control,
(Machinery S. Tremblay Tel: 819-477-6677,
Fax: 819-477-6466)
40 Ton KONE, , 47’ span, 75’ lifting, 2x20t hoist, remote control,
(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
50 TM KONE, , 2x25T hoist, 45’ span, 68’ lifting height, remote
control, (Machinery S. Tremblay Tel: 819-477-6677,
Fax: 819-477-6466)
150’ run way for 30 & 50 Ton crane, including rail, (Machinery S.
Tremblay Tel: 819-477-6677, Fax: 819-477-6466)
D5700 DRILLS, RADIAL
36" x 4MT TONE FAN, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 3
3’ Arm OOYA, , 1500rpm, w/work table, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
3’ Arm SUNLIKE, , 1500rpm, w/work table, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
4’ KITCHEN & WADE, E-24, MT5, (Machinery S. Tremblay
Tel: 819-477-6677, Fax: 819-477-6466)
5’ x 5MT IKEDA, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 3
DONAU, , Universal, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 3
E2425 EDM, CONVENTIONAL NC/CNC
MAXIMART, V45-100, Die Sinker, Mint Condition, (Machinerie
Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)
50 Amp ARISTECH, , CNC, Sinker, 25.6"x 13.8" table, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
F5006 FURNACES
Heat Treating , New & Reconditioned, Powered by Electric,
Gas, Oil, Propane, for all purposes, (Park Thermal
International Tel: 905-877-5254, Fax: 905-877-6205)
G4706 GRINDERS, CYLINDRICAL
12"x 16" PARKER MAJESTIC, 1C, Universal, Ref# 9882,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
G8025 GRINDERS, SURFACE, RECIPROC
6"x 18" CIM, , Manual, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
6"x 18" LIAN FENG, , Manual, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
G9030 GRINDERS, MISCELLANEOUS
AMADA, Togu III (2006), Automatic Punch & Die Grinder, Ref#
9964, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
DECKEL, SO, End Mill, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 3
HEINMAN, , Cutter, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 3
H5975 HONES, HORIZONTAL
SUNNEN, 1804, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 3
AlbertaB F G Machine Tools Inc., Edmonton (Brian)....................................................... 780-434-7795 ...............780-436-0717................16
British ColumbiaECCO Machinery, Surrey (Larry) ......................................................................... 877-513-1773 ...............778-298-2024................16
Modern Tool (BC) Ltd, Port Coquitlam (Pam) ...................................................... 604-472-1444 ...............604-472-1455................22
ONBrighton Machinery Sales Inc, Ingersoll (Brian) ................................................... 519-485-7089 ...............519-485-7368................16
DiPaolo Machine Tools Ltd., Mississauga (Nelson).............................................. 905-676-9265 ...............905-676-9436................10
Fabri-Hermann Machines Inc, Cambridge (Karl).................................................. 519-623-1987 ...............519-623-3724................19
Fabtec Machine Tool Solutions Inc, Oakville (Raj) ............................................... 905-469-1586 ...............905-469-3054................16
Ferric Machinery Inc, Mississauga (Koen) ........................................................... 877-337-7424 ...............905-820-3234..................1
Havlik Int’l Machinery, Cambridge (John)............................................................. 519-624-6240 ...............519-624-4119 ................12
Infinity Assets Solutions, Concord (Leslie)........................................................... 905-669-8893 ...............905-669-7512..................9
L S Walker Machine Tools Inc, Milton (Chris)....................................................... 905-876-0890 ...............905-876-1959................20
Machine Solutions Inc., Guelph (Andrew)............................................................ 416-220-5910...................................................... 23
Natex Machinery Group Inc., Brampton (Alex) .................................................... 905-789-0070 ...............866-386-3281..................8
Neiman Machinery Sales Inc., Newmarket (Kurt) ................................................ 905-715-7776 ...............905-715-7744................16
Park Thermal International, Georgetown (Sales)................................................. 905-877-5254 ...............905-877-6205................16
Paul Machinery, Burlington (Paul)........................................................................ 905-634-8442 ...............905-681-6940................15
Phase Quest, Mississauga (Harold)..................................................................... 416-578-5399 ...............416-753-7209................16
Powermaster Machinery Ltd, Mississauga (Peter)............................................... 905-624-9327 ...............905-624-8591..................3
S K Braly Machinery Inc, Mississauga (Steve) .................................................... 905-793-8080 ...............905-793-2190................18
SMTCL Canada Inc., Oakville (Merry) ................................................................. 905-829-1579 ...............905-829-8692..................2
Sabito Machinery Inc, Vaughan/Concord (David)................................................. 905-738-8730 ...............905-738-5148..................7
TOS Trade Canada Inc., Milton (Marian) ............................................................. 905-878-0888 ...............905-878-9022................24
Trader Machinery Inc, Concord (Jonathan).......................................................... 905-669-7507 ...............905-669-7512..................4
QCBoulanger Machinerie Inc, St-Ferdinand (Ben).................................................... 418-428-4709 ...............418-428-4710................16
Levage Manco Inc., Ste. Catherine (Daniel) ........................................................ 450-638-3877 ...............450-638-5898................16
Machinerie Gilles Lupien, Drummondville (Gilles)................................................ 819-478-5266 ...............819-478-5266................16
Machinery S. Tremblay, Drummondville (Sylvain)................................................ 819-477-6677 ...............819-477-6466................16
Seguin Machinery Ltd, Vaudreuil-Dorion (Gerry).................................................. 514-935-3531 ...............514-932-4459................13
Stock Machine Tools Co, Laval (Andre) ............................................................... 514-326-7006 ...............514-329-2599................16
USAJordan Craig Machinery Int’l Inc, New City, NY (Jordan) ..................................... 845-398-0073 ...............845-398-0074..................6
COMPANY PHONE FAX PAGE
ADVERTISERS DIRECTORY
Page 18 Clue November, 2014
I6200 IRONWORKERS L0850 LASERS
PAGE 20 CLUE, April 2014
I6200 IRONWORKERS
50 Ton FERRIC, , Single Operator, 5 Stations, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 1
65 Ton FERRIC, , Single Operator, 5 Stations, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 1
80 Ton FERRIC, , Dual Operator, 5 Stations, (Ferric Machinery
Inc Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
100 Ton FERRIC, , Dual Operator, 5 Stations, (Ferric Machinery
Inc Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
125 Ton FERRIC, , Dual Operator, 5 Stations, (Ferric Machinery
Inc Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
110 Ton GEKA HYD, , 5-station, 6"x 6"x 1/2" angle, Also, large
stock of new machines, (Neiman Machinery Sales Inc.
Tel: 905-715-7776, Fax: 905-715-7744)
45~175 Ton HILALSAN, , call for price, (Soudogaz Tel: 418
889-2002, Fax: 418 889-2012)
K3004 KEYSEATERS
DAVIS, No.5, Cap. Keyway cutting 1/16" to 1-1/2", (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
L0850 LASERS
1500 Watt MAZAK, STX510 (1999), 5’ x 10’, Approx. 70,00hrs,
Mazak Refurb 2010, Ref# 9230, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
1500 Watt AMADA, Pulsar LC2418AII (1997), Fanuc 16L, 72" x
198", Ref# 9982, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
1500 Watt MAZAK, STX48MKII, Mazatrol L32B, 43,000 hrs,
Ref# 10103, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
1500 Watt MAZAK, STX48MKII, Mazatrol L32B, 43,000hrs,
Ref# 10103, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
1500 Watt AMADA, LC1212A III, sheet size 50 x 50 before
repositioning, Fanuc Ctl, Amada maintained, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 1
2000 Watt TRUMPF, L2030 (2007), integrated load/unload
automation, Ref# 9589, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
2000 Watt TRUMPF, L2510 (2005), Load/Unload Cell, Ref#
9955, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
2000 Watt CINCINNATI, CL-6 (2000), 5’x 10’ Dual pallet, Fanuc
C2000, chiller, Ref# 10019, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
2KW TRUMPF, TruLaser 1030 (2010), 5’ x 10’, Ref# 10099,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
2000 Watt AMADA, Pulsar LC2415XLA3 (1998), Current
Machine hours 47,600, Ref# 10008, (Jordan Craig Machinery
Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
2000 Watt AMADA, LC1212XL (2000), Fanuc 160iL, CNC
control, 25,000hrs, Ref# 9944, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
2500 Watt MAZAK, STX48MKII (2004), Mazatrol L32B, Ref#
10024, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
2500 Watt MAZAK, STX48MKII (2004), Mazatrol L32B, 38,
100hrs, Ref# 10025, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
2500 Watt MAZAK, STX510 MKII (2004), 5’ x 10’, 41,000 hrs,
Ref# 10104, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
2500 Watt AMADA, Pulsar LC2415NT4 (2008), LMP3015A
Load/Unload, Ref# 10131, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
2500 Watt MAZAK, STX510 MKII (2000), 5’ x 10’, 41,000hrs,
Ref# 10110, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
2500 Watt AMADA, Pulsar LC2415NT4 (2008), Approx.
5900hrs, Ref# 10067, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
3000 Watt TRUMPF, L2530 (1999), 4’x 8’, Siemens, 9483
Beam on hours, Ref# 9753, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
3KW AMADA, Altair LC2412 (1999), 10 shelf storage system,
Load/unload, Ref# 9979, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
3200 Watt TRUMPF, TCL-3030 (2001), 5’x 10’, Ref# 9914,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
3200 Watt TRUMPF, L2530PLUS (2003), Siemans, 4’ x 8’, Ref#
10133, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
4000 Watt AMADA, LC3015F1NT (2008), 5’ x 10’, Ref# 9779,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
4000 Watt AMADA, Gemini FO4020NT (2005), 6’ x 12’, Approx.
22,454hrs, Ref# 9774, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
4000 Watt MAZAK, Hypergear 510 (2008), Approx. 25,000hrs,
Ref# 9912, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
4000 Watt MAZAK, Hypergear 510 (2006), Installed New:2008,
Less than 8500hrs, Ref# 9707, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
4000 Watt AMADA, LC3015CII (2008), Theta 5-axis, No rotary
chuck, Ref# 9953, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
4000 Watt MAZAK, STX510 (2002), Refurbished by Mazak,
Approx. 1000hrs, Ref# 10028, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
4000 Watt MAZAK, STX510 (2002), Refurbished by Mazak,
Approx. 1000hrs, Ref# 10029, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
CERTIFIED EQUIPMENT APPRAISALS * Toronto, OntarioPhone: (905) 793-8080 Fax: (905) 793-2190 Email: [email protected]
W W W . S K B R A L Y . C O M
CLUE, July 2010 Page 3
DRILLS, GEARED HEAD
ARBOGA, A3808DRILLS, RADIAL
DONAU, DR40-Z rapid radial drillDRILLS, MISCELLANEOUS
SAALFELD, BS50 Pillar drill, 2" capacityGRINDERS, CYLINDRICAL
LANDIS, 4"x 18"
TOS, BHU25, 10"x 24"
JONES & SHIPMAN, 10"x 27"GRINDERS, INTERNAL
OVERBECK, Zetto-30GRINDERS, SURFACE, RECIPROC
BROWN & SHARPE, 6"x 12"
OKAMOTO, ACC-618, 6"x 18" Hydarulic
NICCO, NFG-515HD, 6"x 20" Form grinderGRINDERS, TOOL & CUTTER
CHEVALIER, FCG-510
HASBERG, FS5 CutterGRINDERS, MISCELLANEOUS
BLANCHARD, 16" Vertical surface grinderKEYSEATERS
MORRISONLATHES, CNC
DAEWOO, 10 HC CNC Turning Centre
COLCHESTER, Storm 90, 10" (2000)
NAKAMURA TOME, TMC-15
NAKAMURA TOME, SL-JRLATHES, ENGINE
LANSING, TAD-FS-650, 53" facing lathe
FEELER, FTL-618, 11"x 18" precision lathe
CLAUSING METOSA, C1340, 13"x 40"
TOS, SUI40/1000, 16"x 40"
TOS, SN50B, 20"x 80"
TOS, SN63/2000, 24"x 80"
MORANDO, 24"x 120"
PBR, TM-300, 24"x 196"MILLS, VERTICAL
DELTA, 9"x 49"
TOPWELL, VK 4, 10"x 50"
KAO FONG, 12"x 50" Horz/VertSHEARS, POWER SQUARING
AMADA, M-2560, 1/4"x 8’TOOLING
WAHLI, MXH 300/200 Tool setter
LYNDEX, E348 Elba tool setterMISCELLANEOUS
Centering & Facing Machine, SENECA FALLS, CS, LO. Swing
Coordinate Measuring Machine, MITUTOYO, FN-905CMM
End Finishing Machine, SOCO, EF-PV/52
Parts cleaner, HOTSY, 7630
Parts cleaner, HOTSY, H20-2836
Thread Rolling Machine, SHENG JIAN, Z28-63
Tilting box table, 30"x 24"x 22"
Z9000 MISCELLANEOUS Z9000 MISCELLANEOUS
PAGE 22 CLUE, April 2012
MACHINERY ADVERTISER
PUBLISHER
David Stapleford
PRINTED BY:
Ricter Web Printing
DELIVERY
Clue is delivered monthly and is sent bythird class mail on or before the businessday following the seventh of each month
DEADLINE
The deadline for advertising is the dayfollowing the last Wednesday of the month
ADDRESS
343 Smith AveBurlington, ON, L7R 2T9
Phone: 905-528-7765Fax: 905-917-0222
www.cluemachines.com
e-mail: [email protected]
MUST SELL
Cincinnati 10ga x 10'
Power Squaring Shear
Bliss #21
Punch Press
Contact: TCL Asset Group Inc.Ph: 416-736-1367 x228
Website: www.managingyourassets.com
Alberta
B F G Machine Tools Inc., Edmonton (Brian) ...................................780-434-7795........780-436-0717 .......15
British Columbia
ECCO Machinery, Surrey (Rick) ......................................................778-298-2023........778-298-2024 .......17
Modern Tool (BC) Ltd, Port Coquitlam (Pam) ..................................604-472-1444........604-472-1455 .......16
Ontario
Brighton Machinery Sales Inc, Ingersoll (Brian) ...............................519-485-7089........519-485-7368 .......15
Cameron Steel, Lindsay (Bob) ........................................................705-878-0544........705-878-0560 .......21
Compumachine Canada, Toronto (Peter).........................................416-291-9499........416-291-4990 .......22
Corporate Assets Inc, Toronto (Daphne) .........................................416-962-9600........416-962-9601 .......27
Dipaolo CNC Retrofit Ltd., Mississauga (Nelson) ............................905-676-9265 ......................................10
Fabtec Machine Tool Solutions Inc, Oakville (Raj)............................905-469-1586........905-469-3054 .......18
Ferric Machinery Inc, Mississauga (Koen) ......................................877-337-7424........905-820-3234 .........3
Haco Canada, Mississauga (Francis)..............................................905-828-1087........905-828-2062 .......26
Havlik Int’l Machinery, Cambridge (John) ........................................519-624-6240........519-624-4119 .......13
Hayden Lee, Markham (Hayden) ....................................................905-201-7841........905-201-7842 .......14
Hove Machine Services, Wasaga Beach (David) .............................705-429-5910........705-429-1557 .......15
Infinity Assets Solutions, Concord (Leslie) ......................................905-669-8893........905-669-7512 .........2
L S Walker Machine Tools Inc, Milton (Chris) ..................................905-876-0890........905-876-1959 .......12
Machine Solutions Inc., Guelph (Andrew) .......................................416-276-0596 ......................................25
Micro Trend Robotics Inc, Pickering (Peter) ....................................905-509-1218........905-509-2687 .......15
Nimesch Machinery, Markham (George) .........................................416-786-7762........905-415-3868 .........1
Nova International, Mississauga (Richard) ......................................905-624-4522........905-624-1917 .......15
Park Thermal International, Georgetown (Sales) ..............................905-877-5254........905-877-6205 .......15
Phase Quest, Mississauga (Harold) ................................................416-578-5399........416-753-7209 .......15
Powermaster Machinery Ltd, Mississauga (Peter)...........................905-624-9327........905-624-8591 .........5
S K Braly Machinery Inc, Mississauga (Steve) ................................905-793-8080........905-793-2190 .......23
Sabito Machinery Inc, Vaughan/Concord (David) ............................905-738-8730........905-738-5148 .........4
Stan Canada Machinery & Equipment Ltd, Brampton ......................416-252-5767........416-252-4770 .......15
TOS Trade Canada Inc., Milton (Marian)..........................................905-878-0888........905-878-9022 .......28
Trader Machinery Inc, Concord (Jonathan) .....................................905-669-7507........905-669-7512 .........6
Quebec
Boulanger Machinerie Inc, St-Ferdinand (Ben).................................418-428-4709........418-428-4710 .......15
Camex Machinery, Montreal (Elias).................................................514-581-5370........888-414-6441 .......17
Machinerie Gilles Lupien, Drummondville (Gilles)............................819-478-5266........819-478-5266 .......23
Machinery S. Tremblay, Drummondville (Sylvain)............................819-477-6677........819-477-6466 .......15
Soudogaz, St-Lambert de Lauzon (Charles)....................................418 889-2002 ........418 889-2012........25
Stock Machine Tools Co, Laval (Andre) ..........................................514-326-7006........514-329-2599 .......15
USA
Jordan Craig Machinery Int’l Inc, New City, NY (Jordan)..................845-398-0073........845-398-0074 .........8
S R I Advertising, Encino, CA (Susan) ............................................818-761-1792........818-793-0351 .......25
Y.Franke & Company, LLC., Hoffman Estates, IL (York)....................847-874-8972........847-596-8006 .........9
COMPANY PHONE FAX PAGE
ADVERTISERS DIRECTORY
Clue November, 2014 Page 19
L0850 LASERS L6135 LATHES, N/C & CNC
4000 Watt TRUMPF, TCL3030 (1999), Siemans CNC, 60"x
120", Ref# 10040, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
4KW MAZAK, SuperTurboX MarkIII (2010), 5’ x 10’, 7/8"
Load/Unload System, Ref# 10130, (Jordan Craig Machinery
Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
4000 Watt AMADA, FO MII RI 3015 (2011), 5’ x 10’ Rotary
Index, Ref #10120, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
4000 Watt AMADA, Pulsar 2415NTA4 (2010), 8,500hrs, Ref#
10123, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
4000 Watt AMADA, Gemini FO-3015NT (2004), 5’x 10’, 24K
Turbo blower w/6K hours, Ref# 10076, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 6
4000 Watt AMADA, Gemini FO-3015NT (2006), 5’x 10’, Brand
new Turbo blower, Ref# 10087, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
5200 Watt BYSTRONIC, Byspeed 3015 (2005), 5’x 10’, Ref#
10072, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
MAZAK, FMS-A48-12 (2004), 6 Shelf loader, Ref# 9720,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
MAZAK, FMS-A48-12 (2000), Shelf Loader, Ref# 10026,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
MAZAK, FMS-510 (2002), Load/Unload system w/10 Shelf
tower, Ref# 10030, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
L3000 LATHES, ENGINE
FEELER, , Hardinge Type, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 3
12"x 36" LOGAN (by Powermatic), 2557 VLH, Variable speed, 3
& 4 jaw chucks, collets., (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
13"x 30" HARRISON, V.S., (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 3
13"x 40" COLCHESTER, Master 2500, 5HP, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
13"x 40" COLCHESTER, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 3
18" x 60" “New” POWERTURN, 460, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
18"x 80" DARBERT, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 3
20"x 40" PROSTAR, 6250, 3 & 4 Jaw chucks, Steady & Follow,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
20"x 80" TOS, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 3
TOS, SN-55B, 22" Swing, 32" in Gap x 156" Centers,
(Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266)
22"x 60" LODGE & SHIPLEY, , real heavy duty, DRO, few
hours, (Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266)
23"x 80" VDF, E3H (1976), 14"OCS, 3-1/8"sp bore, 15hp. taper,
Ref# 2033, (B F G Machine Tools Inc. Tel: 780-434-7795,
Fax: 780-436-0717)
SHENYANG, CW 6263B, 26" swing x 120" centers, Mint cond.,
(Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266)
26"x 120" CHIEN YEH, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 3
40"x 120" JHS United, , $-Jaw Chk, (2) Steady Rests, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
40"x 315" STANKO, , Superb shape, 4 jaw chuck, $34,000,
(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
50"x 120" SUMMIT, , 6"spnidle, 4 jaw chuck, DRO, (Soudogaz
Tel: 418 889-2002, Fax: 418 889-2012)
63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
L3300 LATHES, VERTICAL
55" STANKO, 1516, 4-jaw chk, turning cap, work height 43",
top shape, (Soudogaz Tel: 418 889-2002, Fax: 418
889-2012)
L6135 LATHES, N/C & CNC
OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw,
2" Bar cap, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
MAZAK, (2006), Quickturn Nexus 450-II, 33.27"sw, 80" Mach.
Length, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
HYUNDAI KIA, SKT250SY (2010), Fanuc 18T, Live tooling,
Sub Spdl.,10"Chk, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
HARRISON, Alpha 400, 16"sw x 52"cc, Fanuc 2-1/8" bore,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
12"x 40" HYUNDAI, HIT-30-S (1995), Seimens 840C, Over
Bed 20", Mint cond., (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266)
16"x 40" MICROWEILY, TY-1540D (2007), Teach-Turn CNC
toolroom, Fagor 8055TC, 7-1/2" 3 jaw chk, V8 hyd turret,
Ref# 2331, (B F G Machine Tools Inc. Tel: 780-434-7795,
Fax: 780-436-0717)
26.8"Sw, 41.2"ctrs GILDEMEISTER, CTX510 (2004), Fanuc
21iT, 10"chk, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
27"Sw, 50"ctrs GILDEMEISTER, CTX600 Linear (2002),
Heidenhain iTNC, 15"chk, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
CLUE, April 2014 PAGE 21
• 2000 HWACHEON Vert. Machining Ctr. X-78-1/2 Y-33-1/2 Z-29-1/2• 2003 ROMI CNC Lathe, 18 Over saddle, 118” center, 30 + Toolholders• 1985 MORI SEIKI, 12” Chucker x 20” Center• 1987 DAHLIH Mill, Vert & Horz, 5HP, X-36 Y-16 Z-16 with Readout• 1985 DAHLIH Mill, Vert & Horz, 5HP, X-36 Y-16 Z-16 with Readout• 1999 Vert. Manual Mill, X-37 Y-14 Z-18, with Readout• 1985 FIRST Manual Mill, X-37 Y-14 Z-18, with Readout• 1999 FIRST Manual Mill, X-37 Y-14 Z-18, with Readout• 1985 Manual Lathe, 12” Chuck, 4-Jaw, 24” Steady Rest, 78” Cent.• 1985 MAS Radial Drill with box Table and 6’Rails, Up to 3” Drill, 5’ Travel• 60 Ton NIAGARA OBI Press, 70” Stroke, 32 x 21 TSlot Bolster, 14” Max Sheet Height• 650 Amp Mig-Stick Welder• Bandsaw 20” Throat• Cut Off Saw• Lots of Measuring Tools, Vernier up to 60”, Micrometer up to 18”• Optical Comparator 20”, one 14”• SIP Jig Borer X-20 Y-16 Z-22• Manual Surface Grinder, BROWN & SHARPE 6 x 16• 2 Hydraulic Surface Grinders, 8 x 20 Magnetic, One Electric & one Man.• THOMPSON Hydraulic Surface Grinder, 18 x 72 Electric, Magnetic• CHURCHILL ID OD Grinder, 36” Between Center
RETIRING Sale of Machine Shop in Cambridge
For an Appt call 519-221-6551
• Post your machine photos and videos online for FREE!
• Receive online requests for quotes• Machine turnover creates better search
results for your machines
www.cluemachines.com
Call today: 905-528-7765email us at: [email protected]
CLUE ONLINE MACHINE LISTINGS
M A C H I N E R Y
Let us manage your machines online.Find out how today!
Page 20 Clue November, 2014
M0130 MACHINING CTRS, HORZ
MORI SEIKI, NHX-5000 (2012), X-28.7" Y28.7" Z-34.6",
Installed 2013, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
M0185 MACHINING CTRS, VERT
DECKEL MAHO, DMU50T, 3 + 2, CNC, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
BOSTOMATIC, BD18-1 (1999), Z-17.7" Y-11.8" Z-17.7", 10,
000rpm, ATC 18, CAT 20, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
MATSUURA, RA-2G (2000), X-26" Y-18.1" Z-19.02", Yasnac,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
LAGUN, VMC 3516 (2000), X-30" Y-16" Z-20", Dynapath Delta
CNC Control, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
TONGTAI SEIKI, TMV-850A (2007), X-33.5" Y19.7" Z-20.9",
Ref# 9854, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
FADAL, VMC4020FX, X-40" Y-20" Z-20", Fanuc Oi-MC, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
OKUMA, ES V4020 (2001), X-40" Y-20" Z-20", OSP U10
Control, 40 taper, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
CINCINNATI, Arrow 1000, X-40" Y-20" Z-22", Acramatic 2100,
CTS, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
HAAS, VF3 (2011), X-40" Y-20" Z-25", 5-Axis Rotary & Tilting,
10,000rpm, CAT 40, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
FADAL, VMC4020, X-40" Y-20" Z-28", CNC 88HS, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
BRIDGEPORT HARDINGE, (2007), X-40" Y-24" Z-24", Fanuc
18iMB, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
OKUMA, MC-50VA, X-41.3" Y-20" Z-22", OSP7000 Control, 50
tpr, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
OKK, MCV-560 (2000), X-41" Y-22" Z-22", (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
M0850 MEASURING MACHINES
SHEFFIELD, Cordax D-28 (2009), Discovery III, Ref# 9855,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
M1550 MILLS, CNC
JAFO, , Ram Type, Heidenhain, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 3
12"x 51" TOS, FV-30 (1999), Heidenhain TNC-310 ctl, 40 taper,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
12"x 60" table EAST LION, EL-BT250/3ACNC, Bed Type,
50x21x21 Trvl, NT40 nose, 3600 RPM, (Machinery S.
Tremblay Tel: 819-477-6677, Fax: 819-477-6466)
M1659 MILLS, UNIVERSAL
12"x 55" CMC, FU-2, Vert/Horz, 6.5hp, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
M1974 MILLS, HORIZONTAL
23"x 95" CINCINNATI, 525-20-HP (1964), powered vert o/a,
#50 taper, pendant, Ref# 2288, (B F G Machine Tools Inc.
Tel: 780-434-7795, Fax: 780-436-0717)
M2075 MILLS, PLANER TYPE
64"x 244" STANKO, 7216-G (1982), 56"x 238"tbl, 71"btwn col,
58"max UR, gr hd, mlg hd, plr hd, side hd, Ref# 2399, (B F G
Machine Tools Inc. Tel: 780-434-7795, Fax: 780-436-0717)
M2824 MILLS, VERTICAL
9"x 42" FIRST, LC 1-1/2 VS, DRO, P/F on X, Power Drawbar,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
10"x 50" FIRST, LC-20VS, Fagor 2-Axis DRO, 5HP, 40 Taper,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
17"x 78" TOS, FA5B-V, 50 taper, 20 Hp, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
N5230 NOTCHING MACHINES(NEW) BOSCHERT, , 5/32" x 8-7/8" x 8-7/8", Hydraulic, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
1/4" x 8.6"sq (NEW) FERRIC, , variable angle, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 1
1/4" x 8.6"sq (NEW), , Fixed angle, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
O7397 OVENSNew & Reconditioned , Powered by Electric, Gas, Oil, Propane,
(Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
P6100 PRESSES, OBI60 Ton BLISS, C-60, 4"stk, A/C, (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
M0130 MACHINING CTRS, HORZ P6100 PRESSES, OBI
PAGE 22 CLUE, November, 2014
OvensFor Powder Coating, Aging,
Stress Relief, Normalizing
Gas or Electric
Numerous Sizes Available
Call: 905-702-4644
7055 Auburn Rd., Milton, ON L9T 7V9Ph: (905) 876-0890 Fax: (905) 876-1959
Email: [email protected]: www.walkermachinery.com
Page 10 CLUE, May 2012
BORING MILLS, CNC, HORZ, FLOOR
UNION (BFP 130 CNC) 5.12" (1994) 120"x 275", Heidenhain ctrlBORING MILLS, HORZ, TABLE
TOS (W100A) 4" 44"x 63"x 63" trvls, 4-axis DRO, 49"x 49" rotary table, new 1996TOS (WH 10 CNC) 4" 43"x 49"x 37" travels, Heidenhain i530 ctl, new 2006TIGERCUT (110 CNC) 4.3" 63”x 86” travels, Fanuc 31i control, new 2012TIGERCUT (110 CNC) 4.3" 63"x 86" travels, Fagor CNC, 1 degree index table, new 2005TOS (WHQ13.8 CNC) 5.12" (2008) 40 ATC, 98”x138” travels, CTS, 3000rpm, Fanuc 31i control, niceTOS (W100A) (2014) Remanufactured, 50 tpr spindle, factory rebuilt to new tolerance, 5-axis
Heidenhain DROBORING MILLS, VERT
G&L 72" CNC, 12 ATC, live tools, Refurbished 2009, Fanuc 21i ctlDRILLS, RADIAL
MAS (VR 8A x 2500) 3" capMAS (VO 50) 2.5" 5’, Box table, good
HONES
SUNNEN (MBB-1800) w/ Sunnen tooling and tooling cabinetLATHES, ENGINE
TOS (SN 400N) 16"x 80" (2003) 2-Axis, DROENTERPRISE 20"x 120"TACCHI 50"x 315" (1973) Steadies, follow rest, 4-jaw chuckPOREBA (TCG 160) 63"x 393" As New!
LATHES, N/C & CNC
MORI SEIKI (SL-6) CNC, 50hp motor, Fanuc 6T control, 15"chk, new 1981MACHINING CTRS, HORZ
NIIGATA (HN 80 FC) 32"x 32" pallets Fanuc 11m control, 6 pallet pool, built in facing head and in/outspindle movement for boring mill applications, 120 ATC, new 1992
MACHINING CTRS, VERT
KAO MING 30"x 60" (2007) 50tpr, 8,000rpm geared head, full enclusure, CTS, Fanuc 18i ctlHARTFORD (PRO 4150) 60"x 157" 50 taper, 10,000 DDS, Fanuc, new 2012
MILLS, UNIVERSAL
TOS (FGS 63T plus) 25"x 71" (2002) 3-Axis DRO, Variable speeds/feeds, pendant ctl, 50tpr, unv head
ZAYER (66MB) 28"x 80" 3-Axis DRO, Unv head, pendant ctl, variable speeds/feedsSAWS, BAND, VERTICAL
MARVEL (81/12) 45 deg tilt, new 2003MISCELLANEOUS
New Cast Iron Angle Plates 12"x44" up to 32"x83"50 plastic automotive skids, 45"x48" pallet, - 4 way pick up138" x 78" x 14", Cast Iron Floor Plates 2 AvailableCLIMAX, Portable Drilling unit (KM 3000)TOS, Rotary Table (ISO 16) 86"x 86" 60" Travel, 17 Ton, Rotary & Linear DRO
2002 TOSFGS 63T PlusUniversal Mill
Clue November, 2014 Page 21CLUE, May 2010 PAGE 21
P6100 PRESSES, OBI R5603 ROLLS, PLATE BENDING
75 Ton TOLEDO, , Air Clutch & Brake, 5"stroke, (Brighton
Machinery Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)
80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x
36"bed, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
100 Ton CKD HRONOV, , TYP: LEND 100, A/C, Variable
Stroke Length, Command stamp ctls, (Brighton Machinery
Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)
110 Ton NIAGARA, Model: A 5 1/2, 6" Stroke, Mech. Clutch
w/air assist, (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
P7100 PRESSES, STRAIGHT SIDE
800 Ton BLOW, SC2-800-96-60 (1998), 96"x 60" bed, 16"stk,
20-40spm, Like New!, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
P9150 PUNCHES, SINGLE STATION
30 Ton EUROMAC, CX750/30, 750mm Throat, (Neiman
Machinery Sales Inc. Tel: 905-715-7776, Fax: 905-715-7744)
40 Ton STRIPPIT, Super 750 SG, 750mm Throat, (Neiman
Machinery Sales Inc. Tel: 905-715-7776, Fax: 905-715-7744)
P9275 PUNCHES, TURRET
19 Ton TRUMPF, Trupunch 1000 (2007), Only 3109hrs, Ref#
9812, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
20 Ton TRUMPF, Trumatic TC3000L (2007), 2KW Truzx 2000,
Ref# 9851, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
20 Ton TRUMPF, TC2020R Rotation (2001), 19 Sta. Rotation,
50"x 100", Ref# 9933, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
22 Ton AMADA, Apelio III 2510VL (2001), Fanuc 160 IL, 2KW
Laser, Under Amp, Ref# 9458, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
22 Ton AMADA, Vipros 2510 King (1999), Fanuc 18P, Ref#
9997, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
22 Ton MURATEC WIEDEMANN, C2500 (1997), 4 a/i, 12
Station multi-tool, (ECCO Machinery Tel: 877-513-1773,
Fax: 778-298-2024)
22 Ton AMADA, Vipros 255 (1997), Fanuc 18P, 31 Sta., 3A/I,
Ball Table, Ref# 9801, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
22 Ton AMADA, Vipros 255 (1999), Fanuc 18P, 31 Sta., 3A/I,
Ref #10124, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
27.5 Ton TRUMPF, TC5000R-1300 (2005), Sheetmaster,
Tooling, Quick sharp, Quick set, Ref# 9584, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 6
33 Ton AMADA, Pega 345Q (2000), Fanuc O4PC, 58 Sta, 2a/i,
Ref# 9344, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
33 Ton AMADA, Pega 357 (1985), Fanuc 6M, 58 Sta, 2a/i, Ref#
10007, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
33 Ton AMADA, Pega 367 (1992), O4PC, 60"x 72", 44 Sta,
2a/i, Ref# 9987, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
33 Ton AMADA, Vipros 368 King II (2000), Fanuc 18P, CNC
control, Ref# 9963, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
33 Ton AMADA, Vipros III 3510NT (2004), 58 Sta, 4a/i, Ref#
9920, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
33 Ton AMADA, Vipros 358 King (1995), Fanuc O4PC, Ref#
10097, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
33 Ton AMADA, Vipros 358 KingII (1999), Fanuc 18P, 4 A/I,
Ref# 10098, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
33 Ton AMADA, Pega 345K (1985), Fanuc 6M, 44 Sta., 2 A/I,
Ref # 10119, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
33 Ton STRIPPIT, 1000MXP/30 (2000), Fanuc OP, 40 Station,
3 A/I, Thin Style, Ref# 10136, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
33 Ton AMADA, EMK3610NT AMNC-F (2008), 60"x 100", Ref#
10069, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
33 Ton AMADA, Vipros 367 Queen (1999), Fanuc 18P, 58 Sta,
2 A/I, Ref# 10082, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
33 Ton AMADA, Vipros 358 KingII (1999), Fanuc 18P, 4 A/I,
Ref# 10085, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
33 Ton STRIPPIT, 1500H30 (1999), Fanuc 180IP, 60"x 100",
Thick, Ref# 10075, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 6
R4704 ROLLS, ANGLE BENDING
2"x 2"x 3/16" “NEW” TAURING, SAF DS 50HV, Hydraulic,
(Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
2"x 2"x 3/16" SAHINLER, (2008), assorted tooling, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
4"x 4"x 3/8" Profile Roll, , Hyd. Side guides, (Ferric Machinery
Inc Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
R5603 ROLLS, PLATE BENDING
LUNA, 4135-12/12, 1260 x 1.2mm cap., (Neiman Machinery
Sales Inc. Tel: 905-715-7776, Fax: 905-715-7744)
3/16"x 4’ Power Rolls, , (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
3/16"x 5’ Power Rolls, , (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
3/16"x 6.5’ Power Rolls, , (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
1/4"x 5’ AKYAPAK, , Mechanical, 3 rollers, call for price,
(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
1/4"x 8’ , 4 Roll standard, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
Latest Installation by FERRIC Machinery
FIBERMAK 3KW Fiber Laser (5ft x 10ft)Baseline Custom Fabricating Ltd., Courtice, ON
Baseline Fabricating is serving the metal industry in the Durham and GTA region since 2004. An industry leader in the custom metal fabricating, constantly upgrading their production facility to maintain the service, quality and efficiency to their clients.The latest addition a FERRIC-Fibermak 3 Kw fiber laser with cutting speeds up to 3 times faster than a CO2 laser on mild, stainless and aluminum, gives an extra competitive edge in order turn around.For cutting needs contact: [email protected]
All FERRIC products are sold with installation and training. Local service by our FERRIC service team.
For more information on the FERRIC-ERMAK products visit:
Westside Service Ltd.4406 58th St S, Lethbridge, AB
Tel: 403-380-5047 [email protected]
FERRIC Machinery Inc.3980 Chadburn Cres, Mississauga, ONTel: 905-820-3232 [email protected]
www.ferr icmachinery.com
Page 22 Clue November, 2014
1/2"x 10’ AKYAPAK, , Hydraulic, 4 rollers, call for price,
(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
1/2"x 10’ ROUNDO, PS255 (1997), Ref# 9957, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 6
R5605 ROLLS, PLATE BENDING, INIT.
PINCH
1/2"x 10’ ROUNDO, (1997), (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
S0403 SANDERS
36" TIMESAVER, No.137-IHD, Wet type Sander, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
S0653 SAWS, BAND, HORIZONTAL
DO-ALL, C916A, Auto, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 3
13"x 18" WAYTRAIN, , fully auto, swivel, call for price,
(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
18"x 24" WAYTRAIN, , fully auto, swivel, call for price,
(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
18"x 24" WAYTRAIN, , semi auto, double swivel, call for price,
(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
S0690 SAWS, BAND, VERTICAL
24" STARTRITE, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 3
28" Throat T-JAW, 700C, w/Blade Welder & Grinder, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
14"x 21" DoALL, TF-14X21, 32"x 36" table, 5hp, vertical tilting
frame, (Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266)
S0948 SAWS, MISCELLANEOUS
4"x 10" ELUMATEC, , Fully Automatic Circular Saw,
(Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266)
12" Blade IMET, Perfect 300, Cold Saw, (Neiman Machinery
Sales Inc. Tel: 905-715-7776, Fax: 905-715-7744)
14" Blade IMET, Record 350, Pneumatic vise, Cold Saw,
(Neiman Machinery Sales Inc. Tel: 905-715-7776,
Fax: 905-715-7744)
14" Blade IMET, Record 350, Cold Saw, (Neiman Machinery
Sales Inc. Tel: 905-715-7776, Fax: 905-715-7744)
S4105 SHEARS, POWER SQUARING
1/8"x 10’ ACCURSHEAR, , Hyd, motorized BG, DRO, call for
price, (Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
1/4"x 10’ “NEW” FERRIC, 3100 x 6, CNC Backgauge, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 1
1/4"x 10’ HACO, , CNC Back gauge, (Machinery S. Tremblay
Tel: 819-477-6677, Fax: 819-477-6466)
1/4"x 10’ JELSINGRAD, used, w/ Motorized BG, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 1
1/4"x 12’ CINCINNATI, 1812 (1967), FOPBG, Ref# 9942,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 6
1/4"x 13.5’ “NEW” FERRIC, 4100 x 6, w/Sheet support system,
auto Back gauge, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 1
3/8"x 14’ ALLSTEEL, , Mot Backgauge, under power in
Montreal., (Boulanger Machinerie Inc Tel: 418-428-4709,
Fax: 418-428-4710)
1/2" x 10’ “NEW” FERRIC, 3100 x 13, CNC Backgauge, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 1
3/4"x 10’ ALLSTEEL, , Hyd, motorized BG, Rake & gap, call for
price, (Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)
S4256 SHEARS, MISCELLANEOUS
PEDDINGHAUS, Anglemaster 623-M, Punch Tonnage: 80 Ton,
$65,000, (Neiman Machinery Sales Inc. Tel: 905-715-7776,
Fax: 905-715-7744)
T0140 TABLES, ROTARY
12-1/4" KITIGAWA, TS320R, w/Tailstock, 3-7/8"Bore, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
W3054 WELDERS, SPOT
20 KVA SIP, , (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
Z9000 MISCELLANEOUS
Transformers 5 KVA to 1000 KVA, Large Assortment of used,
(Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Pallet Trucks, (Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Assorted Fans, (Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
LNS, , Barfeeds, Servo S2 & S3, Late models, w/Remote
pendant, Excellent, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
LYNDEY, , Tool Presetter, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 3
WAHLI, , Tool Presetter, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 3
SUNNEN, MBB-1650, Manual Honing Machine, Asst’d Tooling &
Cabinet, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
ROSCAMAT, R400, Pneumatic Tapping Arm, (Neiman
Machinery Sales Inc. Tel: 905-715-7776, Fax: 905-715-7744)
R5603 ROLLS, PLATE BENDING Z9000 MISCELLANEOUS
PAGE 22 CLUE, November, 2014
MODERN TOOL BC LTD.
New & Used Equipment, Machinery Sales | Toll-Free: 1-800-717-1440
Modern Tool BC LTD. offers an extensive line-up of new and used machine tools, fabricating, sheet metal, and production machinery.
1385 Kingsway Avenue, Port Coquitlam, BC V3C 1S2 | (604) 472-1444 | Toll Free: 1-800-717-1440
DURMA AD-R37175 CNC Hydraulic Press Brake
HYD-MECH S-20A IIIAutomatic Band-Saw
Need your equipment serviced? Our service department is available from Monday to Friday 9am to 5pm
On the web @ www.moderntoolbc.comFollow us on Twitter @ModernToolBC
Service & Parts Sales | Toll-Free: 1-800-717-1440
SCOTCHMAN 6509-24MHydraulic Ironworker
DURMA PBH-180Profile Bending Machine
Page 24 Clue November, 2014
M A C H I N E R Y
899 Danforth PlaceBurlington, ON L7T 1S1Phone: 905-528-7765
Fax: 905-917-0222
a TOS Varnsdorf company
TOS Trade Canada Inc.415 Industrial Dr.Milton, ON L9T 5A6http://www.tostrade.com
Tel: (905) 878 0888Fax: (905) 878 [email protected]
Call the only local TOS905-878-0888
Table & Floor Type Horizontal Boring MillsHeavy Duty Design
Variety of Sizes
Variety of Equipmnet
Heavy Duty Tables
Independentplatform
Short delivery
New and improved Design
Wide range oftechnological
functions
Competitivepricing
Visit our website for more details:
www.tostrade.com