Cloth Doll Shoe Pattern To fit 14” - 16” Lali Dolls and Lali

Cloth doll pattern

by Cutest Creations ©2012

Materials Needed:• Wool felt• Sew on Velcro or Snap

fasteners• Sewing machine• Thread• Scissors

This shoe pattern will fit the Lali Cloth doll pattern, as well as 14” - 16” Lali Waldorf Dolls and other similar cloth dolls with a foot measurement of 2.5” long x 2” wide.

Wool felt is sturdier than craft felt and will make a nicer finished product. You can order from online shops such as Weir Dolls and Crafts, A Childs Dream Come True, as well as several Etsy shops.

Cutting out pattern pieces;Begin by cutting out your pieces according to the instructions on the pattern pieces. You should have 2 shoe tops, 2 bottoms and 2 straps.

Cut out all 6 pieces from the wool felt.

© 2012 – Cutest Creations – www.lalidollnursery.com Page # 1 of 9

Sewing together:

Fold the center flap down as shown in this photo and sew in place.

© 2012 – Cutest Creations – www.lalidollnursery.com Page # 2 of 9

Fold the two back ends of the shoes together like this.

Place on the machine and sew the two ends together.

© 2012 – Cutest Creations – www.lalidollnursery.com Page # 3 of 9

You should now have this.

Match the notches from the shoe top to the notches on the shoe bottom.

© 2012 – Cutest Creations – www.lalidollnursery.com Page # 4 of 9

Pin the shoe top to the shoe bottom, matching up notches. Pay attention to the pattern piece instructions for the front and the back of the shoe pieces. Make sure the front of the shoe bottom matches up with the front of the shoe top and the back of the shoe bottom matches up with the back of the shoe top.

Place the shoe on the machine and sew 1/4” seam all the way around the edges of the shoe. (Make sure your shoe is wrong-side out).

© 2012 – Cutest Creations – www.lalidollnursery.com Page # 5 of 9

Your shoe should now look like this.

You can now turn the shoe right-side out.

© 2012 – Cutest Creations – www.lalidollnursery.com Page # 6 of 9

Now, you will attach the straps to the shoes. (One shoe strap will attach on the right side of one shoe and on the other shoe, you'll attach the strap on the left side of the shoe, so that the closure of the shoes will be on the outsides of the shoes).

This photo shows the strap sewn to the side of the shoe.

© 2012 – Cutest Creations – www.lalidollnursery.com Page # 7 of 9

Pull the strap on the shoe through the loop on the shoe top like this. You may need to shorten the length of the strap depending on the thickness of your dolls foot.

Next, you will either attach Velcro or snap fastener onto the straps (as shown on pattern

pieces). Here I have used the snap fasteners.

©2012 Cutest Creations, Do not copy or share any part of this file. You may sell products made from this

pattern, please give credit to Cutest Creations for the pattern used.

© 2012 – Cutest Creations – www.lalidollnursery.com Page # 8 of 9

© 2012 – Cutest Creations – www.lalidollnursery.com Page # 9 of 9