18.650 – Fundamentals of Statistics 26mm 1. Introduction ...
CLICK TO STARTwholeofhouse.bunnings.com.au/pdf-productpackage/AlfrescoInternal… · Quad 19 x 19mm...
Transcript of CLICK TO STARTwholeofhouse.bunnings.com.au/pdf-productpackage/AlfrescoInternal… · Quad 19 x 19mm...
CLICK TO START
USE TOOLBARTO NAVIGATE
Made from natural timber - Paulownia Sourced from sustainablemanaged plantations Lightweight and dimensionally stable.
+ PRE FINISHED - NO SANDING OR PAINTING + EASY TO INSTALL - TONGUE & GROOVE PROFILE + TWO FINISHES - SATIN UV COATING OR MATTE FINISH + RANGE OF COLOURS + MATCHING TRIMS AVAILABLE + APPLICATION - WALLS OR CEILINGS + INDOOR OR OUTDOOR UNDERCOVER
Ideal for carpenters, builders and architectural projects
Pre-finished Natural TimberLining Boards for Walls & Ceilings
Premium Products at cost effective prices
HOME INSTALLRANGE COMPANY SUPPORT
USE TOOLBARTO NAVIGATE
DESIGNER LINING91mm x 26mm
LINING BOARD130mm x 9mm
LINING BOARD90mm x 9mm
TRIMS(Three profiles)
GLOSSWOOD’S PRE-FINISHED NATURAL TIMBER RANGE
HOME INSTALLRANGE COMPANY SUPPORT
USE TOOLBARTO NAVIGATE
LINING BOARD90mm x 9mm
BACK TO RANGE
90MM LINING BOARDS• Natural Timber• V-Joint Tongue & Groove
Profile• Quick & Easy to install• Pre-finished – requires no
further coating• Available in two finishes• Satin UV (no VOC’s) - 10
colours in range• Matte oil based stains - 8
colours in range• Trims in matching colours
available• 2.4 Lm lengths 10 pack -end
matched (only in Bunnings)• 3.6Lm lengths 10 pack
HOME INSTALLRANGE COMPANY SUPPORT
SATIN UVCOLOURS
MATTECOLOURS
USE TOOLBARTO NAVIGATE
LINING BOARD130mm x 9mm
130MM LINING BOARDS
• Natural Timber• V-Joint Tongue & Groove
Profile• Quick & Easy to install• Pre-finished – requires no
further coating• Available in two finishes• Satin UV (no VOC’s) -
10 colours in range• Matte oil based stains -
8 colours in range• Trims in matching colours
available• 3.6Lm lengths 10 pack
HOME INSTALLRANGE COMPANY SUPPORT
BACK TO RANGESATIN UVCOLOURS
MATTECOLOURS
USE TOOLBARTO NAVIGATE
DESIGNER LINING91mm x 26mm
DESIGNER LINING• Natural Timber - Paulownia
- Laminated• V-Joint Tongue & Groove
Profile• 2 profiles that can be mixed
to change pattern• Quick & Easy to install• Pre-finished – requires no
further coating• Available in Matte oil based
stains - 8 colours in range• Square Trim 26 x 26mm in
matching colours available• Special orders - 3.6Lm
lengths- packed to order
HOME INSTALLRANGE COMPANY SUPPORT
BACK TO RANGEMATTECOLOURS
Double B15
Single B10
USE TOOLBARTO NAVIGATE
TRIMS(Various Profiles)
TRIMS• Natural Timber designed to
compliment lining range• Quick & Easy to install• Pre-finished – requires no
further coating• Available in two finishes• Satin UV (no VOC’s) - 10
colours in range• Matte oil based stains - 8
colours in range• Profiles for lining boards
Cover strip 35 x 10mm pencil round both sides. Quad 19 x 19mm
• For Designer lining boards Square trim 26 x 26mm 3.6Lm order by the length
HOME INSTALLRANGE COMPANY SUPPORT
BACK TO RANGESATIN UVCOLOURS
MATTECOLOURS
Cover Strip
Quad
Square Trim
USE TOOLBARTO NAVIGATE
SATIN UV COLOURS & FINELINE CODES
HOME INSTALLRANGE COMPANY SUPPORT
BACK TO RANGE
CEDAR
90x9x2.4 007155790x9x3.6 0071387130x10x3.6 007157219x9x3.6 007081235x10x3.6 0070810
LINING BOARD 8pkLINING BOARD 10pkLINING BOARD 10pkQUAD TRIM EachCOVERSTRIP Each
JARRAH
90x9x2.4 007155890x9x3.6 0071389130x10x3.6 007157319x9x3.6 007258235x10x3.6 0072590
WHITE
90x9x2.4 007156190x9x3.6 0071395130x10x3.6 007157519x9x3.6 007077835x10x3.6 0070779
CLEAR ASH
90x9x2.4 007156390x9x3.6 0071565130x10x3.6 007157719x9x3.6 007158235x10x3.6 0071580
DISTRESSED WHITE
90x9x2.4 007156290x9x3.6 0071564130x10x3.6 007157619x9x3.6 007158135x10x3.6 0071579
LINING BOARD 8pkLINING BOARD 10pkLINING BOARD 10pkQUAD TRIM EachCOVERSTRIP Each
TASMANIAN OAK
90x9x2.4 007155990x9x3.6 0071393130x10x3.6 007157419x9x3.6 007061835x10x3.6 0070619
LIMEWASH
90x9x2.4 n/a90x9x3.6 0073054130x10x3.6 007305019x9x3.6 007305735x10x3.6 0073046
DRIFTWOOD
90x9x2.4 n/a90x9x3.6 0073052130x10x3.6 007304819x9x3.6 007305535x10x3.6 0073044
FEATHER GREY
90x9x2.4 n/a90x9x3.6 0073053130x10x3.6 007304919x9x3.6 007305635x10x3.6 0073045
OAK
90x9x2.4 007306090x9x3.6 0073061130x10x3.6 007306219x9x3.6 007306335x10x3.6 0073064
USE TOOLBARTO NAVIGATE
MATTE OIL- BASED STAIN COLOURS & FINELINE CODES
HOME INSTALLRANGE COMPANY SUPPORT
BACK TO RANGE
LINING BOARD 8pkLINING BOARD 10pkLINING BOARD 10pkQUAD TRIM EachCOVERSTRIP Each
CEDAR
90x9x2.4 007152190x9x3.6 0071420130x10x3.6 007154119x9x3.6 007142935x10x3.6 0071425
JARRAH
90x9x2.4 007152290x9x3.6 0071422130x10x3.6 007154219x9x3.6 007143035x10x3.6 0071426
TEAK
90x9x2.4 007152990x9x3.6 0071531130x10x3.6 007154919x9x3.6 007155435x10x3.6 0071551
MERBAU
90x9x2.4 007152490x9x3.6 0071423130x10x3.6 007154519x9x3.6 007143135x10x3.6 0071427
POSSUM
90x9x2.4 007152690x9x3.6 0071424130x10x3.6 007154719x9x3.6 007141735x10x3.6 0071428
LINING BOARD 8pkLINING BOARD 10pkLINING BOARD 10pkQUAD TRIM EachCOVERSTRIP Each
CHARCOAL
90x9x2.4 007152590x9x3.6 0071530130x10x3.6 007154619x9x3.6 007155335x10x3.6 0071550
SPOTTED GUM
90x9x2.4 007306590x9x3.6 0073066130x10x3.6 007306819x9x3.6 007306935x10x3.6 0073070
JETTY
90x9x2.4 007152790x9x3.6 0071440130x10x3.6 007154819x9x3.6 007144435x10x3.6 0071443
USE TOOLBARTO NAVIGATE
MATTE OIL- BASED STAIN COLOURS
HOME INSTALLRANGE COMPANY SUPPORT
BACK TO RANGE
CEDAR JARRAH TEAK MERBAU POSSUM
CHARCOAL SPOTTED GUM JETTY
Note: The Designer Lining range is an “Off Range” product - contact your Bunnings representative to order.
USE TOOLBARTO NAVIGATE
First calculate your material requirements
90mm boards have a coverage of 86mm 130mm boards have a coverage of 125mmDesigner lining 91mm have a coverage of 81mm
Work to the nearest pack size (10 lengths per pack) and include wastage of 10% or more for cutting and waste.Check to see if trims are required and calculate requirements work-ing in 3.6m lengths.
- 11.63Lm- 8.00Lm- 12.35Lm
= 1m2= 1m2= 1m2
INSTALLATION GUIDE
1. Timber should be acclimatized within the space as to where it is to be installed.2. Prepare boards by docking on a 90 degree angle and under cut on a 2–3 degree angle for a perfect butt-joint. End matched boards (2.4m do not require trimming).3. End seal boards and re-seal every end joint or fresh cut.
4. Use polyurethane adhesive spreading adequate glue to batten and follow manufactures instructions.5. Secret nail fix by using a brad gun nailing through the tongue on a 45 degree angle to clamp board in place while adhesive cures. Then place the next board in place and repeat process. 6. Finish with trims by bradding and/or gluing in place to cover expan-sion gaps.
Talk to your Bunnings representative if you require more install information.
HOME INSTALLRANGE COMPANY SUPPORT
PREFINISHED LINING BOARD
I N S TA L L AT I O N G U I D E
BATTEN/SURFACE
POLYURETHANEADHESIVE
WALL/CEILING
USE TOOLBARTO NAVIGATE
Glosswood is an Australian company who has been producing a range of pre-finished timber linings since 2003. Our award winning products won the HIA product innovation award.
We continuously improve our coating technology and have superior UV coatings which are water based and have No VOCs. Along with traditional timber colours we have released new “on trend” colours and profiles. Our linings and mouldings are made from sustainable natural timber that has a beautiful grain and is dimensionally stable.
Being pre finished, Glosswood is easy to install and delivers a premium product at a cost effective price.
ABOUT GLOSSWOOD
HOME INSTALLRANGE COMPANY SUPPORT
USE TOOLBARTO NAVIGATE
ORDERS & SUPPORT
Call 133 062 to place an order + Installation details available+ Contact your local Bunnings representative on 133 062+ Technical support hotline: 1300 882 064
HOME INSTALLRANGE COMPANY SUPPORT