Click on the Normal View icon located in the lower left hand corner of your screen to read the...
-
Upload
larissa-sloman -
Category
Documents
-
view
213 -
download
0
Transcript of Click on the Normal View icon located in the lower left hand corner of your screen to read the...
Identify Characteristics of the M68 CCOIdentify Characteristics of the M68 CCO
Perform PMCS on the M68 CCOPerform PMCS on the M68 CCO
Put the M68 CCO into OperationPut the M68 CCO into Operation
Zero the M68 CCOZero the M68 CCO•Bore SightBore Sight
•Zeroed WeaponZeroed Weapon
•Unzeroed WeaponUnzeroed Weapon
Qualify with the M68 CCOQualify with the M68 CCO
Basic MarksmanshipBasic Marksmanship
PREFACEPREFACE
Hide this slide during your presentation Hide this slide during your presentation
M68 Close Combat OpticM68 Close Combat OpticIdentify Characteristics of the M68 CCOIdentify Characteristics of the M68 CCO
Perform PMCS on the M68 CCOPerform PMCS on the M68 CCO
Put the M68 CCO into OperationPut the M68 CCO into Operation
Zero the M68 CCOZero the M68 CCO•Bore SightBore Sight
•Zeroed WeaponZeroed Weapon
•Unzeroed WeaponUnzeroed Weapon
Qualify with the M68 CCOQualify with the M68 CCO
Basic MarksmanshipBasic Marksmanship
Description : Electrical Red Dot sight for the M16/M4 series weapons
Optic: 100% Parallax Free, Anti-Reflective Coated Lens System (BEYOND 50 METERS)
Length: 10.24 inches (260mm) with Mount
Weight: 6.2 oz (175g)
Battery Life: 3-20 Days
M68 CCO CharacteristicsM68 CCO Characteristics
M68 CCO CharacteristicsM68 CCO Characteristics
REAR LENS COVERREAR LENS COVERREAR LENS COVERREAR LENS COVER
ELEVATION/ WINDAGEELEVATION/ WINDAGECAP AND SCREWCAP AND SCREW
ELEVATION/ WINDAGEELEVATION/ WINDAGECAP AND SCREWCAP AND SCREW
FRONT LENS COVERFRONT LENS COVERFRONT LENS COVERFRONT LENS COVER
ROTARY SWITCHROTARY SWITCHROTARY SWITCHROTARY SWITCH
TORQUE LIMITING KNOBTORQUE LIMITING KNOBTORQUE LIMITING KNOBTORQUE LIMITING KNOB
BATTERY BATTERY CAPCAP
BATTERY BATTERY CAPCAP
M16A1/A2 Adapter BracketM16A1/A2 Adapter Bracket
““Gooseneck”Gooseneck”
M16A1/A2 Adapter BracketM16A1/A2 Adapter Bracket
““Gooseneck”Gooseneck”
BATTERY BATTERY COMPARTMENTCOMPARTMENT
BATTERY BATTERY COMPARTMENTCOMPARTMENT
M68 CCO CharacteristicsM68 CCO Characteristics
Anti Reflective DeviceAnti Reflective Device(ARD)(ARD)
Anti Reflective DeviceAnti Reflective Device(ARD)(ARD)
BATTERY BATTERY ORIENTATIONORIENTATION
BATTERY BATTERY ORIENTATIONORIENTATION
The ARD reduces The ARD reduces reflection caused by reflection caused by the sun which may be the sun which may be seen by the enemy.seen by the enemy.
Suggested storage of lens covers while Suggested storage of lens covers while sight is in usesight is in use
Suggested storage of lens covers while Suggested storage of lens covers while sight is in usesight is in use
ThreadsThreadsThreadsThreadsThreads on the Threads on the
ARD and front of ARD and front of M68 allows easy M68 allows easy
installation of installation of the ARDthe ARD
M68 CCO CharacteristicsM68 CCO Characteristics
HAND TIGHTEN THE ARD TO THE M68 ONLY!HAND TIGHTEN THE ARD TO THE M68 ONLY!HAND TIGHTEN THE ARD TO THE M68 ONLY!HAND TIGHTEN THE ARD TO THE M68 ONLY!
RED DOT SIZE: RED DOT SIZE: 2.2 cm AT 25M 2.2 cm AT 25M 8.8 cm AT 100M8.8 cm AT 100M
26.4 cm AT 300M (9.75” AT 300M) 26.4 cm AT 300M (9.75” AT 300M)
RED DOT SIZE: RED DOT SIZE: 2.2 cm AT 25M 2.2 cm AT 25M 8.8 cm AT 100M8.8 cm AT 100M
26.4 cm AT 300M (9.75” AT 300M) 26.4 cm AT 300M (9.75” AT 300M)
26.4 cm (9.75 in)26.4 cm (9.75 in)
25 Meters 300 Meters
NOTE: THE HIGHER THE ROTARY SWITCH SETTING
THE BRIGHTER THE DOT
NOTE: THE HIGHER THE ROTARY SWITCH SETTING
THE BRIGHTER THE DOT
2.2 cm2.2 cm
M68 CCO CharacteristicsM68 CCO Characteristics
If the operator sees the red dot on the target and uses good If the operator sees the red dot on the target and uses good marksmanship techniques, the bullet will strike the target.marksmanship techniques, the bullet will strike the target.If the operator sees the red dot on the target and uses good If the operator sees the red dot on the target and uses good marksmanship techniques, the bullet will strike the target.marksmanship techniques, the bullet will strike the target.
Place the red dot on the target for a hit on the target.Place the red dot on the target for a hit on the target.Place the red dot on the target for a hit on the target.Place the red dot on the target for a hit on the target. Reflex (non-telescopic) sightReflex (non-telescopic) sight
No centering or focusing required BEYOND 50 METERS
Two eyes open method of sightingTwo eyes open method of sighting
M68 CCO Principals of Operation M68 CCO Principals of Operation
M68 CCO Principals of Operation M68 CCO Principals of Operation
WITHIN 50 METERSWITHIN 50 METERSWITHIN 50 METERSWITHIN 50 METERS
BEYOND 50 METERSBEYOND 50 METERSBEYOND 50 METERSBEYOND 50 METERS
Elevation AdjustmentsElevation AdjustmentsClockwise one clickClockwise one click
Down 4mm at 25 metersDown 4mm at 25 metersWindage AdjustmentsWindage AdjustmentsClockwise one clickClockwise one click
Left 4mm at 25 metersLeft 4mm at 25 meters
Windage and Elevation one click = 4mm at 25 metersWindage and Elevation one click = 4mm at 25 metersWindage and Elevation one click = 4mm at 25 metersWindage and Elevation one click = 4mm at 25 meters
M68 CCO Principals of Operation M68 CCO Principals of Operation
M68 CCO Principals of Operation M68 CCO Principals of Operation
NOTE: THE HIGHER THE ROTARY SWITCH SETTING THE BRIGHTER THE DOTNOTE: THE HIGHER THE ROTARY SWITCH SETTING THE BRIGHTER THE DOTNOTE: THE HIGHER THE ROTARY SWITCH SETTING THE BRIGHTER THE DOTNOTE: THE HIGHER THE ROTARY SWITCH SETTING THE BRIGHTER THE DOT
9.6 mm
9.6 mm13 mm
M16
13 mm
M4
1. Elevation (1 click @ 25m = 4mm) (clockwise = down)1. Elevation (1 click @ 25m = 4mm) (clockwise = down) 2. Windage (1 click @ 25m = 4mm) (clockwise = left) 2. Windage (1 click @ 25m = 4mm) (clockwise = left) 3. Sight picture = Red dot center mass3. Sight picture = Red dot center mass
1. Elevation (1 click @ 25m = 4mm) (clockwise = down)1. Elevation (1 click @ 25m = 4mm) (clockwise = down) 2. Windage (1 click @ 25m = 4mm) (clockwise = left) 2. Windage (1 click @ 25m = 4mm) (clockwise = left) 3. Sight picture = Red dot center mass3. Sight picture = Red dot center mass
NOTE: USE ONLY THE M16A2 ZERO TARGETNOTE: USE ONLY THE M16A2 ZERO TARGET
M68 CCO Principals of Operation M68 CCO Principals of Operation
M68 CCO Principals of Operation M68 CCO Principals of Operation
EMITS A LASEREMITS A LASER
DOES NOT EMIT A LASERDOES NOT EMIT A LASERDOES NOT EMIT A LASERDOES NOT EMIT A LASER
WARNINGWARNINGIF ROTARY SWITCH IS SET HIGHER THAN 3 IT CAN BE SEEN AT NIGHT.IF ROTARY SWITCH IS SET HIGHER THAN 3 IT CAN BE SEEN AT NIGHT.
WARNINGWARNINGIF ROTARY SWITCH IS SET HIGHER THAN 3 IT CAN BE SEEN AT NIGHT.IF ROTARY SWITCH IS SET HIGHER THAN 3 IT CAN BE SEEN AT NIGHT.
M68 CCO Principals of Operation M68 CCO Principals of Operation
M68 CCO Principals of Operation M68 CCO Principals of Operation
M68 CCO PMCSM68 CCO PMCS• INSPECT SIGHT:INSPECT SIGHT:
• INSPECT BATTERY CAP AND ADJUSTMENT CAPS INSPECT BATTERY CAP AND ADJUSTMENT CAPS - THREADS, O-RINGS AND BATTERY- THREADS, O-RINGS AND BATTERY
• ENSURE RED DOT IS VISIBLEENSURE RED DOT IS VISIBLE
• MOUNTING BRACKET MOUNTING BRACKET NOT DAMAGED/MISSING NOT DAMAGED/MISSING
• LENS COVERS LENS COVERS NOT CRACKED/MISSINGNOT CRACKED/MISSING
• INSPECT SIGHT:INSPECT SIGHT:
• INSPECT BATTERY CAP AND ADJUSTMENT CAPS INSPECT BATTERY CAP AND ADJUSTMENT CAPS - THREADS, O-RINGS AND BATTERY- THREADS, O-RINGS AND BATTERY
• ENSURE RED DOT IS VISIBLEENSURE RED DOT IS VISIBLE
• MOUNTING BRACKET MOUNTING BRACKET NOT DAMAGED/MISSING NOT DAMAGED/MISSING
• LENS COVERS LENS COVERS NOT CRACKED/MISSINGNOT CRACKED/MISSING
M68 CCO OPERATIONM68 CCO OPERATIONM68 CCO OPERATIONM68 CCO OPERATIONM16A2 MountingM16A2 Mounting
Hand tighten to carryinghandle only
Hand tighten to carryinghandle only
NO SPACER INSTALLEDNO SPACER INSTALLEDNO SPACER INSTALLEDNO SPACER INSTALLED
Rotary SwitchRotary SwitchRotary SwitchRotary Switch
M4/MWS use spacerM4/MWS use spacer M16A2 use no spacerM16A2 use no spacerM16A2 use no spacerM16A2 use no spacer
M4/MWS MountingM4/MWS MountingM4/MWS MountingM4/MWS MountingM68 CCO OPERATIONM68 CCO OPERATIONM68 CCO OPERATIONM68 CCO OPERATION
HAND TIGHTEN TORQUE LIMITING KNOB TWO CLICKSHAND TIGHTEN TORQUE LIMITING KNOB TWO CLICKS
Mount on same notchMount on same notchto maintain zeroto maintain zero
Mount on same notchMount on same notchto maintain zeroto maintain zero
M68 CCO BORE SIGHTINGM68 CCO BORE SIGHTINGM68 CCO BORE SIGHTINGM68 CCO BORE SIGHTING
1.1. Zero borelight to the weaponZero borelight to the weapon
2.2. Gunner gets into a stable firing Gunner gets into a stable firing position and, with both eyes position and, with both eyes open, aims the M68 CCO at the open, aims the M68 CCO at the crosshair.crosshair.
3.3. Target person will then give the Target person will then give the adjustments to be made to the adjustments to be made to the M68 CCO based off the strike M68 CCO based off the strike of the borelight laser. Borelight of the borelight laser. Borelight laser should fall within the laser should fall within the circle provided on offset.circle provided on offset.
4.4. M68 CCO adjustment: 1 click = M68 CCO adjustment: 1 click = 2mm at 10m (5clicks per 2mm at 10m (5clicks per square on 10m offset) square on 10m offset) Adjustment for example: right Adjustment for example: right 29, up 10.29, up 10.
M68 CCO ZEROING M68 CCO ZEROING (25 METER TARGET)(25 METER TARGET)
M68 CCO ZEROING M68 CCO ZEROING (25 METER TARGET)(25 METER TARGET)
DOWN 1.5 cmDOWN 1.5 cmDOWN 1.5 cmDOWN 1.5 cm
DRAW IMPACT ZONE ON THE TARGETDRAW IMPACT ZONE ON THE TARGETDRAW IMPACT ZONE ON THE TARGETDRAW IMPACT ZONE ON THE TARGET
AIM CENTER MASSAIM CENTER MASSAIM CENTER MASSAIM CENTER MASS
ROUNDS MUST STRIKE 1.5 ROUNDS MUST STRIKE 1.5 CM BELOW CENTER MASS.CM BELOW CENTER MASS.
1.1. Adjust red dot center top of the front sight Adjust red dot center top of the front sight postpost
2.2. Fire three rounds at 25 meters and triangulateFire three rounds at 25 meters and triangulate3.3. Retighten torque knobRetighten torque knob4.4. Shoot another three rounds and triangulateShoot another three rounds and triangulate5.5. Make adjustments and repeat steps 4 & 5 Make adjustments and repeat steps 4 & 5
until zeroeduntil zeroed
1.1. Adjust red dot center top of the front sight Adjust red dot center top of the front sight postpost
2.2. Fire three rounds at 25 meters and triangulateFire three rounds at 25 meters and triangulate3.3. Retighten torque knobRetighten torque knob4.4. Shoot another three rounds and triangulateShoot another three rounds and triangulate5.5. Make adjustments and repeat steps 4 & 5 Make adjustments and repeat steps 4 & 5
until zeroeduntil zeroed
M68 CCO ZEROING M68 CCO ZEROING ((Zeroed WeaponZeroed Weapon))
M68 CCO ZEROING M68 CCO ZEROING ((Zeroed WeaponZeroed Weapon))
M16 EXAMPLE = RIGHT 10 DOWN 9
M68 CCO ZEROING (Unzeroed Weapon)
M68 CCO ZEROING (Unzeroed Weapon)
M16 EXAMPLE = RIGHT 10 DOWN 9
1. Bore sight the weapon with the borelight2.2. Fire three rounds at 25 meters and triangulateFire three rounds at 25 meters and triangulate3.3. Retighten torque limiting knobRetighten torque limiting knob4.4. Shoot another three rounds and triangulateShoot another three rounds and triangulate5.5. Make adjustments and repeat steps 4 & 5 Make adjustments and repeat steps 4 & 5
until zeroeduntil zeroed
1. Bore sight the weapon with the borelight2.2. Fire three rounds at 25 meters and triangulateFire three rounds at 25 meters and triangulate3.3. Retighten torque limiting knobRetighten torque limiting knob4.4. Shoot another three rounds and triangulateShoot another three rounds and triangulate5.5. Make adjustments and repeat steps 4 & 5 Make adjustments and repeat steps 4 & 5
until zeroeduntil zeroed
M68 CCO ZEROING M68 CCO ZEROING (Back-up (Back-up Iron Sight)Iron Sight)
M68 CCO ZEROING M68 CCO ZEROING (Back-up (Back-up Iron Sight)Iron Sight)
NOTE: THE BACK-UP IRON NOTE: THE BACK-UP IRON SIGHT SHOULD ALREADY SIGHT SHOULD ALREADY BE ZEROED. IF NOT THE BE ZEROED. IF NOT THE BIS CAN BE BORESIGHTED BIS CAN BE BORESIGHTED USING THE BORLIGHT USING THE BORLIGHT LASER.LASER.
NOTE: THE BACK-UP IRON NOTE: THE BACK-UP IRON SIGHT SHOULD ALREADY SIGHT SHOULD ALREADY BE ZEROED. IF NOT THE BE ZEROED. IF NOT THE BIS CAN BE BORESIGHTED BIS CAN BE BORESIGHTED USING THE BORLIGHT USING THE BORLIGHT LASER.LASER.
ADJUST THE M68 CCO ADJUST THE M68 CCO UNTIL THE RED DOT IS UNTIL THE RED DOT IS CENTERED ON THE CENTERED ON THE FRONT SIGHT POST AND FRONT SIGHT POST AND CENTERED IN THE REAR CENTERED IN THE REAR SIGHT APERTURE. AFTER SIGHT APERTURE. AFTER RED DOT IS CENTERED RED DOT IS CENTERED FOLD BIS DOWN AND FOLD BIS DOWN AND DISREGARD FRONT SIGHT DISREGARD FRONT SIGHT POST WHEN FIRING.POST WHEN FIRING.
ADJUST THE M68 CCO ADJUST THE M68 CCO UNTIL THE RED DOT IS UNTIL THE RED DOT IS CENTERED ON THE CENTERED ON THE FRONT SIGHT POST AND FRONT SIGHT POST AND CENTERED IN THE REAR CENTERED IN THE REAR SIGHT APERTURE. AFTER SIGHT APERTURE. AFTER RED DOT IS CENTERED RED DOT IS CENTERED FOLD BIS DOWN AND FOLD BIS DOWN AND DISREGARD FRONT SIGHT DISREGARD FRONT SIGHT POST WHEN FIRING.POST WHEN FIRING.
M68 CCO QUALIFICATIONM68 CCO QUALIFICATIONM68 CCO QUALIFICATIONM68 CCO QUALIFICATION
QUALIFICATIONQUALIFICATION23 OUT OF 4023 OUT OF 40
QUALIFICATIONQUALIFICATION23 OUT OF 4023 OUT OF 40
PRACTICAL EXCERCISEPRACTICAL EXCERCISEPRACTICAL EXCERCISEPRACTICAL EXCERCISE
1.1. WALK THROUGH WALK THROUGH 2.2. PMCSPMCS3.3. MOUNTING PROCEDURESMOUNTING PROCEDURES4.4. AN/PEQ-2A OPERATIONAL PROCEDURESAN/PEQ-2A OPERATIONAL PROCEDURES
1.1. WALK THROUGH WALK THROUGH 2.2. PMCSPMCS3.3. MOUNTING PROCEDURESMOUNTING PROCEDURES4.4. AN/PEQ-2A OPERATIONAL PROCEDURESAN/PEQ-2A OPERATIONAL PROCEDURES