Clic Vertex Thermal Setup
8
Clic Vertex Thermal Setup 26/08/2013 Maxence CURDY 1 CERN PH/DT/EO
description
Clic Vertex Thermal Setup. 26/08/2013 Maxence CURDY. CERN PH/DT/EO. Overview. Thermo-mechanical setup progress. Stave prototype: assessment of different solutions tested, proposal for next steps. Production status. Infrastructure: - Bosh profiles: Ok. - PowerPoint PPT Presentation
Transcript of Clic Vertex Thermal Setup
1
Clic Vertex Thermal Setup
26/08/2013
Maxence CURDY
CERN PH/DT/EO
2
Overview
• Thermo-mechanical setup progress.• Stave prototype: assessment of different
solutions tested, proposal for next steps.
3
Production statusInfrastructure:
- Bosh profiles: Ok.
- Polycarbonate walls: Machining.
- Joints: Ok.
- Junction rectangle/cylinder: Ok.
- Small mechanical parts: Machining.
- Fan: Ok.
- Flow Meter: Ordered.
- Data Acquisition (DAQ): Ok.
Everything has been stored in the building 187
4
Bosh profiles
5
The Turntable
6
Fan + cone
It's just assembled for the picture, not mounted.
7
What remains to be done ?
- Machining last parts.
- Machining /assembly the box.
- Water jet cutter wait the plate for welding the cone.
- Supply the fan.
- Assembling all setup.
- Heaters Contact with MINCO or Wolfgang.
- Ordered Pt1000 sensor Farnell or Radiospares.
- Stave fixation.
Production status
8
Stave
Weight for 280mm 6.7g 3.5g 2.38g 3.08g 2.77g 1.51g
3 4 5 6 7 8
