Classidur Product Range Promain · Solvent-based resin solution for impregnation, conso-lidation...
Transcript of Classidur Product Range Promain · Solvent-based resin solution for impregnation, conso-lidation...
PRODUCT RANGE
VERNIS CLAESSENS SA
Route du Silo 6 CH-1020 RENENS Tél. +41 21 637 17 17 Fax +41 21 637 17 29 www.claessens.com
Promain UK Limited Promain House
Knowl Piece Business Park Hitchin SG4 0TY 01462 421 333
[email protected] www.promain.co.uk
The essentials for renovation
A GREAT CLASSIC THE RENOVATION THE PRIMER SILICONE REINFORCED
IN PERFECTION «MATT» … FOR ALL-ROUND SUCCESS OPAQUE MATT PAINT
Description : Description :
Matt waterbased paint for all interior work on Matt waterbased interior paint for a perfect
ceiling and walls on a Siloxane base. Odour free. matt finish to ceilings and walls with no over-
lapping marks.
Properties :
• excellent opacity ( Class 1 for 120 ml/m2 Properties :
according to EN 13.300 ) • « absolutely matt » finish
• zero tension and non film forming • film has extended wet edge time
• excellent water vapour permeability • finish is free of brush or roller marks, even in
• economical ( may be diluted with up to 30 % low-angled light and over large surface areas
water) • highly recommended for touching up without
• prevents soiling flashing
• can be tinted with classiMix or universal tin- • Apply directly on absorbent substrates, no pri-
ting pastes mer or undercoat required
• two coats can be applied directly on plaster-
Use : board
Ideal for painting directly on new plaster and • excellent wet abrasion resistance (class 3 ac-
plasterboard. As a first very opaque coat on cording to EN 13.300)
mineral substrates (e.g. plasterboard) before • zero tension
applying any traditional water-based finish. • negligible yellowing
• can be tinted with classiMix or universal
tinting pastes
Use :
Highly recommended for producing a high qua- lity flawless matt finish with no overlapping marks to large atrium areas, even in low angled light. In addition, it’s excellent resistance to
wet abrasion makes Classidur HydroFinish perfectly suited to application on wall areas.
Description :
Matt paint for high-performance interior reno-
vation, solvent based.
Properties :
• all-in-one finishing coat. No primer or
undercoat needed
• 100% matt finish without overlapping marks
• low specific gravity
• negligible yellowing
• very easy to apply
• excellent stain blocking properties
(nicotine, dried water marks, soot, etc...)
• zero tension
• excellent water vapour permeability
• completely odourless
• hardening in a controlled manner
• can be tinted with classiMix or universal
tinting pastes
Use :
The complete coating solution for interior
renovation and new quality work (nicotine
stains, soot, dried water stains), and for high-
quality new work.
and new
THE PERFECT WATERBASED FINISH
THE FLAT WALLPAINT
SCRATCH AND POLISH
RESISTANT
Description : Waterbased, flat wall paint, high in binder, with a remarkable resistance to glazing, polishing,
scratching, friction and scrubbing.
Properties : • excellent resistance to glazing, polishing,
scratching, friction and scrubbing • slightly velvet-like matt finish • very long open film • easy to apply • excellent leveling
• odour free
• very white and non-yellowing
• can be tinted with classiMix or universal
tinting pastes
Use : Its excellent resistance to glazing, polishing, scratching, friction and scrubbing makes
Classidur AquaScratch appropriate in applications calling for the finish to withstand mechanical stress (bedroom walls, stairwells, corridor wall areas subject to heavy wear).
Because of its high binder content, Classidur AquaScratch may be applied to large smooth surface areas, producing a flawless finish.
Description:
Matt waterbased renovation paint for ceilings
and walls, based on Hydro-Pliolite® resin.
Properties :
• excellent stain blocking properties (soot,
nicotine, tannin) when applied in 2 coats
• excellent adhesion, also on absorbent
substrates (very good penetration)
• totally matt
• extended film opening with outstanding
quality finish
• zero tension
• neutral odour
• non-yellowing
• can be tinted with classiMix or universal
tinting pastes
Use :
To recoat ceilings and walls, in new and reno-
vation areas, also on absorbent substrates.
+
Description :
Stain blocking, waterbased, adhesion promo- ting primer coat for universal use.
Properties :
• excellent stain blocking properties ( wood
tannins, nicotine, soot, dried water stains... )
• excellent adhesion properties
• compatible with all current single-component
finishing coats
• fast drying ( can be recoated after 4 to 6
hours )
• interior/exterior* use
• can be tinted with classiMix (preliminary test recommended)
*for wood in outdoor area, use Classidur
Universal Primer outdoor-wood
Use : Adhesion promoter for wood, old coherent paint, glass, non-ferrous metals, and with pre-
test on hardplastic material, stained or var- nished substrates. As a stain blocking primer applied prior to any type of current single- component water or solvent-based finish.
Classidur Universal Primer Quartz: New or renovation. Stain blocking primer that
provides a thin structure allowing an easy appli- cation and excellent adhesion of textured wall
coatings (plaster or decorative).
Classidur Universal Primer outdoor-wood: It’s excellent forumla makes Classidur Uni- versal Primer outdoor-wood particularly sui- table for external timber.
Paints for walls and ceiling A range of paints with mould-protection film
SATIN PAINT VERSATILE
SILOXANE-REINFORCED SATIN PAINT
Description : Satin water based, siloxane-reinforced paint for
all indoor work on ceilings and walls, odour-free.
Properties :
• excellent opacity • tension-free • economical (can be diluted from 10 % to 15 % with water)
• washable, scrubbable and polish resistant • scratch and polish resistant
• can be tinted with classiMix or universal tin-
ting pastes
Use : Because of the very high opacity power,
Classidur Aquasil Satin can be applied in only 2 coats, never more on :
• plaster (without undercoat) • all current substrates • old paint coatings • glass surfaces • covering to paint
LIQUID FOR TREATMENT OF MOULD STAINS BEFORE PAINTING
Description:
Colourless water based liquid for treatment of surfaces stai-
ned by mould (fungus, moss and algae).
Properties:
supplied in a practical spray bottle, ready to use, VOC free,
quick and efficient, does not need to be cleaned off (a dry
brushing off is sufficient).
Properties : • good stain blocking (soot, nicotine, tannins,dried water marks, etc…)
• zero tension • excellent leveling • excellent water vapour permeability • totally matt finish • non-yellowing • fast hardening
• can be tinted with classiMix (preliminary test recommended)
Use :
For solvent-free renovation of ceilings and walls.
+
Description : Satin water-based stain blocking paint.
Properties : • good stain blocking (soot, nicotine, tannins,
dried water marks, etc…) • zero tension • excellent leveling • finish «satin velvet-like» • non-yellowing
• rapid hardening • good mechanical resistance and washable
• can be tinted with classiMix (preliminary test recommended)
Use : For painting new or renovated ceillings
and walls. Classidur Renoclassic Satin is particularly suitable for interior renovationwork, especially when a washable satin finishis required.
WATER-BASED MATT PAINT RESISTANT TO MATT INTERIOR PAINT, MATT FUNGICIDAL
PERFORMANCE MOULD PROLIFERATION SILOXANE-REINFORCED PAINT WITH THERMAL
RESISTANT TO MOULD INSULATION EFFECT
PROLIFERATION
+
Description : Description : Description : Description : Matt, stain blocking, water-based paint for Matt solvent-base paint with a protective film Matt interior paint, siloxane-reinforced, with a Matt, interior paint with anti-condensation
interior renovation. against mould infestation. protective film against mould infestation. properties (against thermal bridges).
Use:
Curative solution for treating surfaces affected by mould
stains prior to the application of the Classidur range of
renovation paints .
Properties :
• reversible coating (convertible)
• excellent water vapour permeability
• efficient protective film against mould infes- tation
• excellent stain-blocking • good mechanical resistance • rapid hardening • non-yellowing • odour-free
Use :
Classidur Tradition is specifically used in his- toric buildings including churches. Classidur Tradition has all the characteristics of the Classidur range, with the addition of very high resistance to the proliferation of mould
and can be used, for example in food prepa- ration areas breweries, slaughter houses, can- ning factories, basements, cold stores etc.
Properties : • efficient protective film against mould infes- tation
• proven effectiveness
(see report i.h.d/Dresde. Report available on demand)
• high opacity (class 1 for 120 ml / m2
EN 13.300) • zero tension and non film forming
• high water vapour permeability • solvent-free • odour-free
Use :
Classidur AQUASIL MAT-AF suitable when mould infestation can not be eradicated on painted substrates.
Properties : • combats the cause of mould infestation. • increase the thermal comfort in rooms • high opacity • high covering power • good productivity
• can be tinted with classiMix or universal tinting pastes
Use : Specifically formulated for areas where high
humidity and condensation are a problem, eradicating and preventing thermal shock or
cold bridges adding to the thermal comfort of rooms.
Anti-efflorescence treatment
WATER-BASED
INSECTICIDAL PAINT +
Description : Matt, stain blocking, cationic resin-based paint with
insecticidal properties.
Properties : • proven insecticidal effectiveness
(see TEC laboratory report)
• odour-free
• good stain blocking (soot, nicotine…)
• non-yellowing
• totally matt finish
Use :
For solvent-free application to ceilings and walls pro- viding effective long-term protection from flying and
crawling insects.
RAPID HARDENING
Description : Matt, fast drying paint for indoor renovation,
solvent-based.
Properties : • rapid hardening
• odour-free
• non-yellowing
• no risk of saponification
• abrasion resistant
• zero tension
• exceptional stain blocking
• can be tinted with classiMix or universal tinting pastes
Use: Particularly suitable for areas subjected to mechanical
stress (walls, etc.). Can be covered with light-weight
wallpaper when dry.
+
ANTI-EFFLORESCENCE PAINT water based product
solvent-based product
The insecticidal range
Description: Matt solvent-based, non-saponifiable, efflorescence
preventing paint containing cement, non-saponifiable.
Properties : • prevents the appearance of efflorescence when used
with Classidur H-Fix • very good mechanical resistance • excellent mould and mildew resistance • does not yellow
• can be coated with any non-saponifiable paint • can be tinted with classiMix or universal tinting
pastes
Use: • Wherever the surface to be painted is humid
(capillary rising, runoff, etc.). • For treating and preventing damage due to humidity in walls, internally and externally.
WATER-PROOFING
IMPREGNATION
Description :
Solvent-based resin solution for impregnation, conso- lidation and water-proofing that reacts with humidity.
Properties : • excellent penetration power
• prevents the appearance of efflorescence when used
with Classidur H-Salt • excellent chemical and mechanical resistance
Use : For treating and preventing damage due to humidity
in walls, internally and externally. For consolidating
absorbent mineral substrates and damaged wood.
ODOUR-FREE
ALIPHATIC DILUTANT
Description : Iso-paraffinic solvent with neutral odour.
Properties : • odour-free, thereby increasing comfort during
application and allowing painted premises to be
brought back into use rapidly.
Use :
For odour-free thinning of the solvent based Classidur range of paints in particular and traditio- nal solvent based decorative paints in general.
siloxane reinforced
The brand «NF Environnement»
is given by AFNOR (Association
française de normalisation), foun-
ded in 1991, the French national organization for standardization.
By equal performances suitabi- lity, the brand NF Environnement
identifies product providing a
reduced influence on the envi-
ronment.
cationic technology
VOC < 3 %
developed and manufactured by VERNIS CLAESSENS SA
the obtainment of the logo Hydro PLIOLITE® has been submitted to performance tests, made by Eliokem
according to a severe technical achievement test.
the certificate « Zone Verte
Excell « guarantees an employa- bility in respect of human health
and environment.
SOLVENT-BASED
INSECTICIDAL PAINT
Description : Matt, stain blocking, solvent-based paint with insec-
ticidal properties.
Properties :
• proven effectiveness as an insecticide
(see TEC laboratory report) • zero tension
• stain blocking
• fast drying
• totally matt in one coat
Use : As ceilings and walls paint for both, new and renova-
tion work, whenever you wish to avoid the discom- fort caused by the presence of insects.
Miscellaneous and specialities
classiMix
SOLVENT-BASE UNIVERSAL TINTING PASTES
STAIN BLOCKING PRIMER
Description : Stain blocking, alkyd resin based adhesion primer for
both indoor and outdoor.
Properties: • excellent stain blocking primer • can be used with any current single-component finish • excellent leveling • can be sandpapered • very good gloss retention
Use: Stain blocking primer for any coherent surface, even if soiled. Apply before any type of water- or solvent- based single-component finish.
Cationic Compatible
Description : Universal tinting pastes for water and solvent-based
paints.
Properties :
• wide range of uses (dispersion, matt paints, ena- mels, C+ cationic products, etc…)
• no floatation problems (no color difference when
applied)
• available in 500 ml bottles
Use :
For problem-free tinting of the Classidur range of paints in particular and decorative paints in general.
For more information, please
check the technical datasheet and
the security datasheet on
www.claessens.com.
Several products are not available
in all countries.