CLASSIC GLOSS FINISH FOR MARINE WOOD - Shipserv · 2018-05-16 · CLASSIC GLOSS FINISH FOR MARINE...
2
MARINE COMPLETE CARE SYSTEM FOR MARINE WOOD, METAL AND FIBERGLASS www.owatrol.com OWATROL USA - DURIEU Group 3325 NW 70th Ave Miami, FL 33122, USA Phone : 305-779-3390 Fax : 305-779-3391 eMail : [email protected] DEKS-OLJE ® D. 1 CLASSIC MATTE FINISH FOR MARINE WOOD • DEKS OLJE ® D.1 is a highly penetrating oil that saturates, seals and stabilizes wood, literally feeding the wood with oil to replace those lost and help prevent, splitting, warping and cracking. Many naval architects and tradi- tionalists prefer the rich matte finish, especially on surfaces with foot traffic where a gloss finish would become slippery. DEKS OLJE ® D.1 is the top choice for shipbuilders, teak mills, and passenger vessels around the world. AREAS OF USE: Decks, teak railings, teak furniture, teak lockers, teak seating, teak frames, teak doors, teak flooring (planks), any type of exterior/interior woods. TRANSYL ® MULTI-PURPOSE LUBRICANT – RELEASING OIL • Both the oldest and most modern on the French market, through 70 years of continuous innovation, TRANSYL ® is efficient and simple. A professional product that meets the needs of the specialists in advanced industries and the handyman. Natural capillary action... Exceptional wetting and self-leveling properties. Infiltrates the most inaccessible places. Works between - 30°C to +50°C. Lubricates and releases assemblies seized by rust. Leaves a thin protective film. Dissolves grease, removes multiple residues, disintegrates rust. Facilitates machining – Good chip and swarf flushing properties. DEKS-OLJE ® D. 2 CLASSIC GLOSS FINISH FOR MARINE WOOD • DEKS OLJE ® D.2 is the second step in a two-step system following a fully saturated application of DEKS OLJE ® D.1 as a base coat. DEKS OLJE ® D.2 provides a flexible glossy finish that’s especially beautiful on teak cap rails, teak furniture, teak doors, teak lockers and interior wood trim. DEKS OLJE ® D.2 is the first choice of Captains, Staff Captains, Chief Officers and Bosuns desiring a durable long-lasting high gloss finish on their vessel that is easy to maintain and requires no sanding between coats. AREAS OF USE: Teak railings, teak furniture, teak lockers, teak seating, teak frames, teak doors, exotic hardwoods, any type of exterior/interior woods. DECK CLEANER* (NET-TROL ® ) ONE-STEP TEAK CLEANER AND BRIGHTENER • DECK CLEANER cleans and restores the natural bright color of weather beaten marine wood such as teak and mahogany in just one step! No time-consuming two-step process and no worrying about neutralizing solutions to avoid damaging the wood. In just one-step, DECK CLEANER removes weathered and de-natured wood fibers, surface and ground-in dirt, giving a bright and vibrant look to the wood. Does not contain bleach.. AREAS OF USE: Decks, teak railings, teak furniture, teak lockers, teak seating, teak frames, teak doors, teak flooring (planks), any type of exterior/interior woods. TEAK-OLJE TEAK OIL – OUTDOOR FURNITURE • Transparent and colourless - “matt oiled’’ finish. Maintains the natural look of the wood. Non film foming - Will not peel or flake. Quick and easy maintenance - No sanding or stripping. Will not blacken through exposure to UV rays. AREAS OF USE: Exotic woods : Teak and other woods used for garden furniture except Keruing. Interior and exterior. Horizontal and vertical. MARINE STRIP* (DILUNETT ® ) ONE-STEP TEAK CLEANER AND BRIGHTENER • Removes paints, stains, varnishes ... without scraping. Removes up to 8 coats of paint in one operation. Effective on wood **, PVC, metal ... *** Makes the coating water soluble – Easily removed with water. Does not evaporate, will not dry in hot weather. Reactivated by wetting. * Hazardous - Follow precautions. Except ** Oak, Chestnut, Cedar and marquetry. Except *** aluminum. GELCOAT RESTORER (POLYTROL ® ) COLOUR RESTORER FOR PLASTICS, METAL, ... • GELCOAT RESTORER is a deep-penetrating oil that reaches down into the gelcoat/fiberglass and pulls the original color out, then dries to a tough, flexible finish. GELCOAT RESTORER is long-lasting because it penetrates into the gelcoat/fiberglass, unlike waxes and polishes that sit on the surface and dry out quickly. Also a powerful restorer for dulled brass, copper, chrome, stainless steel and anodized metals (such as aluminum and bronze). AREAS OF USE: Lifeboats, tender boats, painting rafts, fiberglass storage units, exterior/interior brass, copper and chrome. Exterior/interior anodized aluminum and bronze such as pax cabin balconies, interior pax areas, etc... ADFIELDS France - Tours RCS 331 998 484 - 12/16 - Photos : Rob Byron, Jérôme Salort, Strezhnev Pavel, Labbe2, Enisu, Tadamee. * Hazardous - Follow precautions.
Transcript of CLASSIC GLOSS FINISH FOR MARINE WOOD - Shipserv · 2018-05-16 · CLASSIC GLOSS FINISH FOR MARINE...
MARINE
C O M P L E T E C A R E S Y S T E M FOR MARINE WOOD, METAL AND FIBERGLASSwww.owatrol.com
OWATROL USA - DURIEU Group3325 NW 70th AveMiami, FL 33122, USAPhone : 305-779-3390 Fax : 305-779-3391eMail : [email protected]
DEKS-OLJE® D.1CLASSIC MATTE FINISH FOR MARINE WOOD• DEKS OLJE® D.1 is a highly penetrating oil that saturates, seals and stabilizes wood, literally feeding the wood
with oil to replace those lost and help prevent, splitting, warping and cracking. Many naval architects and tradi-tionalists prefer the rich matte finish, especially on surfaces with foot traffic where a gloss finish would become slippery. DEKS OLJE® D.1 is the top choice for shipbuilders, teak mills, and passenger vessels around the world.AREAS OF USE: Decks, teak railings, teak furniture, teak lockers, teak seating, teak frames, teak doors, teak flooring (planks), any type of exterior/interior woods.
TRANSYL®
MULTI-PURPOSE LUBRICANT – RELEASING OIL • Both the oldest and most modern on the French market, through 70 years of continuous innovation, TRANSYL®
is efficient and simple. A professional product that meets the needs of the specialists in advanced industries and the handyman. Natural capillary action... Exceptional wetting and self-leveling properties. Infiltrates the most inaccessible places. Works between - 30°C to +50°C. Lubricates and releases assemblies seized by rust. Leaves a thin protective film. Dissolves grease, removes multiple residues, disintegrates rust. Facilitates machining – Good chip and swarf flushing properties.
DEKS-OLJE® D.2CLASSIC GLOSS FINISH FOR MARINE WOOD• DEKS OLJE® D.2 is the second step in a two-step system following a fully saturated application of DEKS OLJE® D.1
as a base coat. DEKS OLJE® D.2 provides a flexible glossy finish that’s especially beautiful on teak cap rails, teak furniture, teak doors, teak lockers and interior wood trim. DEKS OLJE® D.2 is the first choice of Captains, Staff Captains, Chief Officers and Bosuns desiring a durable long-lasting high gloss finish on their vessel that is easy to maintain and requires no sanding between coats.AREAS OF USE: Teak railings, teak furniture, teak lockers, teak seating, teak frames, teak doors, exotic hardwoods, any type of exterior/interior woods.
DECK CLEANER* (NET-TROL®)ONE-STEP TEAK CLEANER AND BRIGHTENER• DECK CLEANER cleans and restores the natural bright color of weather beaten marine wood such as teak and
mahogany in just one step! No time-consuming two-step process and no worrying about neutralizing solutions to avoid damaging the wood. In just one-step, DECK CLEANER removes weathered and de-natured wood fibers, surface and ground-in dirt, giving a bright and vibrant look to the wood. Does not contain bleach..AREAS OF USE: Decks, teak railings, teak furniture, teak lockers, teak seating, teak frames, teak doors, teak flooring (planks), any type of exterior/interior woods.
TEAK-OLJETEAK OIL – OUTDOOR FURNITURE• Transparent and colourless - “matt oiled’’ finish. Maintains the natural look of the wood. Non film foming - Will
not peel or flake. Quick and easy maintenance - No sanding or stripping. Will not blacken through exposure to UV rays.AREAS OF USE: Exotic woods : Teak and other woods used for garden furniture except Keruing. Interior and exterior. Horizontal and vertical.
MARINE STRIP* (DILUNETT®)ONE-STEP TEAK CLEANER AND BRIGHTENER• Removes paints, stains, varnishes ... without scraping. Removes up to 8 coats of paint in one operation. Effective
on wood **, PVC, metal ... *** Makes the coating water soluble – Easily removed with water. Does not evaporate, will not dry in hot weather. Reactivated by wetting.
* Hazardous - Follow precautions. Except ** Oak, Chestnut, Cedar and marquetry. Except *** aluminum.
GELCOAT RESTORER (POLYTROL®)COLOUR RESTORER FOR PLASTICS, METAL, ...• GELCOAT RESTORER is a deep-penetrating oil that reaches down into the gelcoat/fiberglass and pulls the
original color out, then dries to a tough, flexible finish. GELCOAT RESTORER is long-lasting because it penetrates into the gelcoat/fiberglass, unlike waxes and polishes that sit on the surface and dry out quickly. Also a powerful restorer for dulled brass, copper, chrome, stainless steel and anodized metals (such as aluminum and bronze).AREAS OF USE: Lifeboats, tender boats, painting rafts, fiberglass storage units, exterior/interior brass, copper and chrome. Exterior/interior anodized aluminum and bronze such as pax cabin balconies, interior pax areas, etc...
ADFI
ELDS
Fra
nce
- To
urs
RC
S 3
31 9
98 4
84 -
12/
16 -
Pho
tos
: Rob
Byr
on, J
érôm
e S
alor
t, S
trez
hnev
Pav
el, L
abbe
2, E
nisu
, Tad
amee
. * H
azar
dous
- F
ollo
w p
reca
utio
ns.
MARINE
C O M P L E T E C A R E S Y S T E M FOR MARINE WOOD, METAL AND FIBERGLASSwww.owatrol.com
OWATROL USA - DURIEU Group3325 NW 70th AveMiami, FL 33122, USAPhone : 305-779-3390 Fax : 305-779-3391eMail : [email protected]
MARINE OIL (OWATROL® OIL)MULTI-PURPOSE RUST INHIBITOR – PAINT ADDITIVE• MARINE OIL used directly is a powerful rust inhibitor that penetrates deep into rust pores, removes all
moisture and air from the metal, then dries to form a strong, stable and flexible finish that provides a protective base coating for metals such as bare steel, stainless steel, galvanized, brass, bronze, copper, aluminum and chrome. Add MARINE OIL to oil-based paints, varnishes and primers to improve penetration, and flow out to a silky-smooth finish while reducing unsightly brush marks.AREAS OF USE: Any area where rust is forming, high saltwater/salt air exposure areas (used as a primer to prevent oxidation), to condition alkyd, oil based paints and varnishes, to capture a rustic look on exterior/interior metal that has been weathered (while protecting it at the same time).
COSMOFER®
RESTORES COLOR TO FADED FIBERGLASS• Fills, seals, glues, insulates, levels, repairs. Use on multiple surfaces (wood, metal, plastic, stone ...). Two pack -
True cold welding. Easy to use - Easy sanding. Adjust the setting time as needed. Once cured, can be drilled, tapped, filed, sawn, screwed ... Compatible with any type of paint (single or two pack). Good resistance to heat (120°C), vibration and chemicals. Extremely flexible, will not crack or shrink. Does not clog abrasives.
CHOUKROUT®
RESTORES COLOR TO FADED FIBERGLASS• Two pack. Fills, repairs, seals, glues, insulates, repairs... Excellent adhesion to most surfaces: metal, aluminium,
wood, stone, plastic … Easy to use - Easy sanding. Once cured, can be drilled, tapped, filed, sawn, screwed ... Recoat with any type of paint (single or two pack). Good resistance to heat (120°C), vibration and chemicals. Extremely flexible - will not crack or shrink; Does not clog abrasives.
OWATROL®-ATGNON-SLIP PROTECTION• Steps, walkways, pontoons, decks, etc.• Anti-slip with reinforced uv translucent protection.• Contains antislip microbeads (≈100 microns) made from micronised polypropylene wax.
OWAGRIP*SINGLE PACK NON-SLIP PAINT• Made from polyurethane.• Reinforced anti-corrosive properties + specific anti-uv agents.• Excellent abrasion resistance � double action non-slip fillers : Surface filler + Base filler = long lasting performance.• Satin-matt appearance: limits the accumulation of dirt, allows easy cleaning.• Can be applied to gelcoat, old paintwork, steel, aluminium and wood.
OWATROL®-C.I.P. (RUSTOL C.I.P.)HIGH STRENGTH ANTI-CORROSIVE PRIMER• OWATROL®-C.I.P. completely seals sound underlying metal. Adheres evenly to surfaces with minimal preparation.
Suitable as a primer for any coating, including high solvent finishes. Penetrates deep into the material – and may be used on new or rusted metal to form a solid stable layer that top coatings can firmly adhere to. For both exterior and interior applications. AREAS OF USE: For use in highly corrosive areas (as a primer) where long term solutions are needed and desired - such as; hulls, steel decks, balcony structures, keels, exterior marine equipment, superstructures, holds.
OWATROL®-GLV (RUSTOL-ALU RA.85)ALUMINIUM PAINT FINISH FOR ALL SURFACES • OWATROL®-GLV insulates and provides excellent rust protection. Provides good brightness, coverage and
lasting adherence with high quality aluminum pigment. Apply direct to rusted surfaces - fast and easily. Resists temperatures up to +347°F (175°C) when dry.AREAS OF USE: Any area where oxidation is deteriorating steel, aluminum or galvanized finished metals, such as balcony structures, lamp posts, exterior marine equipment, and any exterior/interior metal structure that requires a high quality aluminum finish.
ADFI
ELDS
Fra
nce
- To
urs
RC
S 3
31 9
98 4
84 -
12/
16 -
Pho
tos
: Rob
Byr
on, J
érôm
e S
alor
t, S
trez
hnev
Pav
el, G
aspr
13. *
Haz
ardo
us -
Fol
low
pre
caut
ions
.
WHITE CHAMPAGNE LIGHT GREY
TEAKCLEAR
