Classic Car Parts & Accessories - Bowers : · PDF fileLighting Small chrome Driving Lamps...

Automotive Components Distributors

www.bowersmidland.co.uk

H. Bowers

Classic Car

Parts & Accessories

Lighting

Small chrome Driving Lamps (BOW5041002)

Small chrome driving lamps (Pair) with clear glass lenses

Small Stainless Steel Driving Lamps (BOW5041000)

Small stainless steel driving lamps (Pair) with clear glass lenses

7" Tripod Headlights (BOW5042000)

(UK) 7" Tripod headlight reflector units (Pair) Lucas P700 type replacement unit fitted with side light holder for H4 halogen bulb. Reproduction of the original P700.

7" Tripod Headlights (BOW5042001)

(Euro) LHD 7" Tripod headlight reflector units (Pair) Lucas P700 type replacement unit fitted with side light holder for H4 halogen bulb. Reproduction of the original P700.

7” Universal Headlamp (BOW5042002) 7" metal reflector universal headlamp unit. Domed lens. RHD (UK) with pilot bulb 'E' marked H4 type. Lucas LUB383 type

7” Universal Headlamp (BOW5042003)

7" metal reflector universal headlamp unit. Domed lens. RHD (UK) without pilot bulb 'E' marked H4 type.


7" metal reflector universal headlamp unit. Domed lens. LHD (EURO) with pilot bulb 'E' marked H4 type.


7" metal reflector universal headlamp unit Flat lens. RHD (UK) with pilot bulb ‘E’ Marked H4 type. Lucas LUB385

7” Crystal Clear Universal Headlamp (BOW5042016)

7" metal reflector universal headlamp unit with optic free domed lens RHD (UK) without pilot bulb ‘E’ marked H4 type

7” Crystal Clear Universal Headlamp (BOW5042008) 7" metal reflector universal headlamp unit with optic free domed lens RHD (UK) with pilot bulb ‘E’ marked H4 type

5 ¾'' Universal Headlamp (BOW5042010)

5 ¾'' metal reflector universal headlamp unit. Domed lens. RHD (UK) with pilot bulb 'E' marked H4 type

5 ¾'' Universal Headlamp (BOW5042012)

5 ¾'' metal reflector universal headlamp unit. Domed lens. RHD (UK) without pilot bulb 'E' marked H1 type

5 ¾'' Crystal Clear Universal Headlamp (BOW5042013)

5 ¾'' metal reflector universal headlamp unit with optic free domed lens RHD (UK) with pilot bulb 'E' marked H4 type

Classic Driving Lamp

7” Black body with chrome rim. Complete kit with loom. Old Leyland style & suitable for 7” lamps. Right hand drive. As used on classic & kit cars etc E marked

Chrome Headlamp Rim (BOW5042028) 8" Push on high quality MGB type chrome rim. Replaces 57H5296

Chrome Headlamp Rim (BOW5042026)

High quality outer chrome rim compatible with early Land Rover, MG and Mini. Supplied with screw and rubber washer.


With clip fitment compatible for Triumph applications


8" screw on high quality MGB type chrome rim. Supplied with screw and rubber washer.

Stainless Steel 7” Stone Guards (BOW5042021)

7" H/Lamp Stainless Steel Stone Guard (Pair) including brackets

Chrome 7” Stone Guards (BOW5042020)

7" H/Lamp Chrome Stone Guard (Pair) including brackets

Chrome 5 ¾” Stone Guards (BOW5042022)

5 ¾” H/Lamp Chrome Stone Guard (Pair) including brackets

Chrome Driving Lamp

Chrome driving Lamp 7" Lamp (E marked) complete with high polished chrome body

7” Chrome Headlight Bowl (BOW5042030)

7" Headlight shell incl. Rim 7" Chromed headlight shell only.

7” Black Headlight Bowl

7” Black body with black rim. Suitable for 7” lamps.

5 ¾” Stainless Steel Headlight Bowl (BOW5042023)

5 ¾” Stainless Steel bowl Suitable for 5 ¾” lamps.

5 ¾” Chrome Headlight Bowl

5 ¾” Chrome bowl Suitable for 5 ¾” lamps.

5 ¾” Black Headlight Bowl (BOW5042024)

5 ¾” Black finish bowl Suitable for 5 ¾” lamps.

Chrome spot lamp

12v H3-55w halogen bulb spot light can be fitted on a badge bar. 98mm x 92mm size lamp

Courtesy Light

12v Universal Courtesy Light

Fog Lamp

Rear fog lamp Land Rover/Classic Replaces PRC7254, XFE100170 & ALU1017

Reverse Lamp Reverse Lamp Land Rover/Classic Replaces PRC7263 & XFD100050

73mm Front & Rear Lamp Units

Front and rear lamp units 73mm Dia x 39mm (Depth) Plastic lens in red, amber & clear. Red lens stop/tail unit with 3 contacts to take 21/5w bulb Amber & Clear units with 2-contacts to take 21w bulb for flasher & reverse lights or 5 watt bulb for side lights ‘E’ marked Front clear lens lamp (BOW9991084). Front/Rear amber indicator lamp (BOW9991088) Rear red stop/tail lamp (BOW9991085)

Grille for 73mm Lamps (BOW9991417)

Black plastic grille for 73mm dia Lamps

Replacement 73mm Amber Lens

Indicator replacement lens Land Rover type 589285

Replacement 73mm Clear Lens

Clear replacement lens Land Rover type 589284

Replacement 73mm Red Lens Stop/Tail replacement lens Land Rover type RTC210

Side Repeater Lamp

Amber Lens Suitable for cars, light commercial motor home etc. Land Rover Mini Applications AHU2592 & PRC9916 type

Side Repeater Lamp

Clear Lens Suitable for cars, light commercial motor home etc. Land Rover Mini Applications AHU2592W, AHU2592CL, XGB000020, XGB100280 type

Side Repeater Lamp

Smoked grey Lens Suitable for cars, light commercial motor home etc. Land Rover Mini Applications AHU2592S & XGB00020 type

7” Headlight Peaks

Stainless steel headlamp peak (Pair) 180mm across x 60mm deep. Highly polished with a distinctive half rolled edge

5 ¾” Chrome Headlight Shell & Rim

5¾" (146mm) chromed headlight shell and rim including reflector retaining clips.

5 ¾” Black Headlight Shell & Chrome Rim

5¾" (146mm) smart black body with chromed rim headlight shell including reflector retaining clips

Chrome Number Plate Light Cover

"Mini" number plate light cover Number Plate Light cover: diecast/chrome

Black Number Plate Lamp (BOW9989168B)

Black ABS Number Plate Lamp Fits on a flat surface EC approved 12v, 10w bulb Suitable for Land Rover/Classic Replaces XFC100550 & 83H335

Chrome effect Number Plate Lamp (BOW9989168)

Chromed ABS Number Plate Lamp Fits on a flat surface EC approved 12v, 10w bulb Suitable for Land Rover/Classic

Chrome Round Hooded Light Round hooded light Chromed metal light unit. Can be used as a number plate light or where a hooded light is required. 38mm dia. Bulb included

Stainless Steel Reverse Light

Reverse light (Stainless steel with glass lens) S/steel reverse light with glass lens complete with 21W bulb. 113mm wide x 60mm high x 73mm deep. Requires 12mm fixing hole. Overall height when fitted (including swivel base) is 67mm. Bulb included.

Reverse Light

Reverse light (Stainless steel with glass lens) S/steel reverse light with glass lens complete with 21W bulb. 113mm wide x 60mm high x 73mm deep. Requires 12mm fixing hole. Overall height when fitted (including swivel base) is 67mm. Bulb included.

Fog Light

Fog light (ABS) ABS plastic fog light unit; matches reverse light CLO56. Contemporary style. 110mm x 57mm x 33mm. Bulb included.

Indicator Light

Indicator light (S/Steel, with glass lens) Stainless steel indicator light with clear glass lens complete with 21W amber bulb. The unit has a feed and earth cable, and can be used at the front or rear of the car. Suitable for late Minis as front indicator.

Exterior Mirrors

Exterior Mirrors (Sports) (BOW5043013)

Exterior Mirror sport style polished chrome finish (Pair) Chrome die-cast base with highly polished chrome finish ABS shell. Can be fitted to most cars as the base has a wide angle of adjustment.

Exterior Mirrors (Sports Black)

Exterior Mirror sport style black (Pair) Black die-cast base with a matt black ABS shell. Can be fitted to most cars as the base has a wide angle of adjustment.

Exterior Mirror Ital Style

Exterior Mirror ("Ital" style) Die cast chrome arm/bright stainless steel head; including mounting gasket and fixing bolt. 115mm round head with convex mirror. 90mm x 30mm base incl. Gasket. Single fixing bolt and location pin 30mm apart. Not Handed.

Exterior Mirror USA style

Exterior Mirror ("USA" style) Die cast chrome arm/bright stainless steel head including mounting gasket. The base is 165mm x 37mm (6½" x 1½") and the fixing screw holes approximately 100mm (4") apart. It is fixed from the outside by two self-tapping screws. Not Handed Can be mounted as a door or wing mirror.

Exterior Mirrors Lucas style (Convex Glass) (BOW5043004 L/H) (BOW5043005 R/H)

Exterior Mirror (Lucas style) with convex glass Die cast chrome arm/bright stainless steel head 105mm diameter; chrome arm base 45mm x 31mm including mounting gasket.

Exterior Mirrors Lucas style (Flat Glass) Exterior Mirror (Lucas style) with flat glass Die cast chrome arm/bright stainless steel head 105mm diameter, chrome are base 45mm x 31mm including rubber mounting gasket

Exterior Overtaking Mirror (BOW5043012)

"Overtaker oblong" clamp-on mirror, Polished stainless steel head 115mm x 73mm with flat mirror. Polished stainless steel bracket including clamp screws. Quarter light fixing. This is a faithful reproduction of the old "Stadium" model.

Exterior Mirror 77mm

Exterior mirror "77mm Overtaker Round" clamp on Exterior mirror: polished stainless steel head 77mm diameter with flat mirror. Polished stainless steel bracket including clamp screws; clamp-on "Overtaker". Quarter light fixing. Not handed.

Exterior Mirror "Oblong Overtaker"

Exterior mirror "77mm Overtaker Round" clamp on Exterior mirror: polished stainless steel head 77mm diameter with flat mirror. Polished stainless steel bracket including clamp screws; clamp-on "Overtaker". Quarter light fixing. Not handed.

Exterior Mirror Round Overtaker (BOW5043010)

77mm Overtaker Round, clamp on. (Mini version) Polished stainless steel head & bracket, flat mirror. Clamp screws included.

Exterior Mirror Matt Grand Prix style Matt finished alloy; very lightweight This is a reproduction of the "Radyot" model popular with the Cobras and many racing cars. The flat mirror is 86mm Ø; the shell 100mmØ x 78mm front to back. Because of the matt finish this mirror can be painted to match the body colour without having to use an etching primer.

Exterior Mirror Round Clamp On (BOW5043011)

Clamp on 105mm polished stainless steel round head & bracket with convex mirror, including clamp screws.

Exterior Mirror Angled Clamp

Exterior mirror with angled clamp to fit "Mini". 105mm round head. Exterior mirror for the "Mini": polished stainless steel; angled clamp; round head. Handed, to fit right side only. For universal fitting see DGCME14.

3" Exterior Mirror (BOW5043008)

3" exterior mirror with curved arm. Clamp fit. Exterior mirror: polished stainless steel head 77mm (3") diameter with flat mirror. Curved polished chrome arm; clamp-on fitting including grub screws. Left or right hand fitting.

4" Exterior Mirror (BOW5043009)

4" exterior mirror with curved arm. Clamp fit. Exterior mirror: polished stainless steel head 102mm (4") diameter with flat mirror. Curved polished chrome arm; clamp-on fitting including grub screws. Left or right hand fitting.

Exterior Mirror Chrome Bullet style (BOW5043006)

Highly polished chrome base and body. Mirror adjustable by loosening screw at back of body. 102mm diameter x 120mm long overall. Base is 93mm x 27mm with fixing holes 50mm apart. Complete with bolts. Flat glass mirror approx 90mm Ø.

S/Steel RH door mirror

Tex style OE mirror s/steel head and chrome stem. Anti dazzle glass. Includes two black plinths. Size - 145 x 90mm

S/Steel LH door mirror

Tex style OE mirror s/steel head and chrome stem. Anti dazzle glass. Includes two black plinths. Size - 145 x 90m

Exterior Mirror Black Bullet Style (BOW5043007)

Matt black body 93mm x 27mm including mounting gasket. 102mm diameter x 120mm length. Fixing holes 50mm apart. Adjustable flat glass mirror.

Interior Mirrors

Interior Mirror Universal (BOW5043000)

Interior mirror, 155mm x 63mm: diecast/bright arm, stainless steel back. Universal. Can be fitted to dash top or suspended over the windscreen. A very popular mirror for the Austin Healey, Sprite, Cobra kit cars etc

Interior Mirror Universal (BOW5043001)

Interior mirror with stainless steel back. The chrome on brass arm is adjustable for height between 90mm to a maximum of 135mm; the fixing centres for the base is 38mm. Can be fitted to dash top or suspended from over the windscreen. Mirror head 155mm x 63mm

Interior Mirror Gold (BOW5043002)

Interior mirror: gold painted back; chrome clamp. Rod fixing. Original equipment on many MGBs..

Interior Mirror (BOW5043003)

Interior mirror: diecast/stainless steel. Suitable for "Mini", many Fords, Landrover etc.

Interior Mirror Suction

Interior mirror (stainless steel back with suction fitting) Interior mirror 150mm x 63mm (6" x 2½"): stainless steel back & clip; powerful suction fitting with lever action.

Interior Mirror

Interior mirror, black head, chrome stem. Interior mirror with black plastic head, diecast chrome stem. Recommended SVA mirror for kit cars.

Interior Mirror

Interior mirror, self-adhesive fixing Interior mirror with bright stainless steel back. Black plastic stem with self-adhesive pad for fixing to windscreen.

Interior Mirror Black Suction

Interior mirror all black suction cup fitting Interior mirror with black plastic head and stem; fixes directly to the windscreen with a powerful suction cup. 120mm x 55mm.

Switches and Electrical

Flasher Unit

(RINGFL1)

12v 2-terminal flasher unit As fitted to most cars pre mid eighties With bulb outage

'Tin Can' Thermal Flasher Units

(RINGFL1H)

Thermal Type 12v flasher unit without bulb failure 21w x 4 Lucas SFB130 type but round fit

Flasher Unit (LUCSFB114)

12v 2-terminal flasher unit As fitted to most cars pre mid eighties. With bulb outage

'Tin Can' Thermal Flasher Units (LUCSFB130)

Thermal type 12v flasher unit without bulb failure 21w x 4 Lucas SFB130 type (Hazard flasher)

Thermal Flasher Unit (LUCSFB105)

12v 3-terminal flasher unit Flasher Unit 12V 3-terminals With bulb outage

Thermal Flasher Unit

Thermal type 12v flasher unit without bulb failure 21w x 4

Hazard Flasher Kit (BOW9996099)

Dashboard mounted hazard flasher kit As Lucas SFB300 Complete with flasher unit fitted

Relay (LUCSRB400)

(Lucas SRB400 26RA) 12V 20A 5 Pin Relay

Relay (LUCSRB402)

(Lucas SRB402 26RA) DAC1027/D 13H9085 13H9731 12V 20A 4 Pin Relay

Relay (LUCSRB411)

(Lucas SRB411 26RA) 12V 20A 5 Pin Relay

Classic Relay (LUCSRB111)

(Lucas SRB111 12v 20amp 6RA 33302) TR3/TR6/MGB/Spitfire Jaguar


(Lucas SRB113 12v 20amp 6RA) MGB/Midget/Jaguar

Classic Relay

Lucas type relay Lucas SRB143 12v 20amp 6RA


(Lucas SRB301 12v 20amp 6RA C36611) Jaguar/Spitfire/TR6

Trumpet Horn (BOW9995005)

12v Classic style twin terminal shell/trumpet horn - high tone

Trumpet Horn (BOW9995004)

12v Classic style twin terminal shell/trumpet horn - low tone

Column Switches

Replaces Lucas SQB115 Application - Rover Mini 1000, 1985-92 Mini Cooper 1.3i (SPi), 1991-96 Mini Cooper Si, 1992-96

Column Switches

Replaces Lucas SQB116 Application - Rover Mini 1000, 1985-92 Mini Cooper 1.3i (SPi), 1991-96 Mini Cooper Si, 1992-96

Column Switches

Replaces Lucas SQB166 Application - Rover Mini 1/4 Ton Van, 1976-80 Mini 95 Van, 1980-83 Mini Clubman 1000, 1976-80 Mini 1100 and 1275 GT, 1975-80 Mini Pick-up 850 and 1000, 1976-83

Column Switches

Replaces Lucas SQB167 Application - Rover Mini 1/4 Ton Van, 1976-80 Mini 1000, 1976-85 Mini 1100, 1976-81 Mini 850, 1976-80 Mini 95 Van, 1981-83 Mini Clubman 1000 & 1100, 1975-80 Mini Clubman 1275 GT, 1975-80 Mini Pick-up 850 and 1000, 1976-83

Column Switches

Replaces Lucas SQB168 Application - Rover Mini Clubman 1275 GT, 1969-76

Column Switches

Replaces Lucas SQB195 Application - Rover Spitfire 1500, 1977-81

Column Switches

Replaces Lucas SQB161 Application - Land Rover Range Rover Rover 800 Morgan XPE10015

Column Switches

Replaces Lucas SQB166 Application - Rover Mini 1/4 Ton Van, 1976-80 Mini 95 Van, 1980-83 Mini Clubman 1000, 1976-80 Mini 1100 and 1275 GT, 1975-80 Mini Pick-up 850 and 1000, 1976-83

Ignition Switch (BOW9996057)

Heavy duty rotary switch (Lucas 34228) 4 position : auxiliary - off - on - start Suitable for commercial and agricultural use

Ignition Switch Key (BOW9996057K)

Lucas 34228 spare key Lucas 54324157 Lucas 54330767

Battery Isolator Switch (BOW9996000)

Battery Isolator Switch: with two plastic keys & rubber splash-proof cover A simple safety and anti-theft device. Spare keys also available (BOW9996000K)

Master Switch (BOW9996001)

Master battery switch FIA approved Incorporates a secondary switch to isolate the ignition circuit, a vital safety factor in competition use. At the same time the main electrical circuit is grounded (earthed) through a 3 ohm 11 watt resistor to prevent surge and protect the alternator circuit. A simple and effective anti-theft device for cars, lorries, boats and agricultural vehicles. Can be flush mounted to a panel (max 12mm thick). Requires a mounting hole 22mm Ø and 2 x 6.5mm Ø bolt fixing holes 37mm apart Spare keys also available (BOW9996001K)

Master Switch (BOW9996031)

Master switch retro style. Lucas SSB106 style retro style battery master switch for dashboard or panel fitting. Isolates the battery and is particularly useful for cars that are not used daily.

Ignition Switch (LUC35327)

Heavy duty rotary switch (Lucas 35327) (Lucas 128SA) 4 position : auxiliary - off - on - start Suitable for commercial and agricultural use

Ignition Switch

12v universal ignition switch (Lucas 31973 style)(Lucas 47SA) 3 position : off - ign - ign/start Suitable for cars, light commercial and off road vehicles

Ignition Switch (BOW9996032)

12v universal ignition switch (Lucas 34680 47SA, SPB501 style) 4 position : auxiliary - off - ign - ign/start Suitable for cars, light commercial and off road vehicles

Heavy Duty Rotary Switch

12v Heavy duty rotary switch (Lucas 33884)(Lucas 128SA) 4 position : off - auxiliary - htr - start Suitable for commercial and agricultural use

Ignition Switch (LUC30608)

12v universal ignition switch Lucas 30608 S45 2 position panel mounted rotary switch Supplied without keys

Heavy Duty Rotary Switch (LUC35288)

12v Heavy duty rotary switch (Lucas 35288)(Lucas 128SA) 5 position : off - auxiliary - htr - start - htr Suitable for commercial and agricultural use Supplied without keys

Heavy Duty Rotary Switch (LUC35630)

12v Heavy duty rotary switch (Lucas 35630)(Lucas 128SA) 3 position : on - htr - start Suitable for commercial and agricultural use

Starter Switch (BOW9996106)

Lucas type ST19 Replaces Lucas 76702/76423 & Unipart 3H949 Application: MG/MIDGET/HEALEY/MINOR

Ignition Switch Key (LUC54316731)

Barrel & key set for Lucas type switches Supplied with 2 keys Lucas 54316731 Lucas 54335169

Lucas Style Master Switch

Master switch Lucas SSB103 style A faithful reproduction of the Lucas SSB103 master switch, battery isolator, fitted as standard equipment to the Austin Healey.

Solenoid (BOW3905030)

Push Button Solenoid Lucas 76464 76465 12volt solenoid

Inhibitor Switch (BOW9996118)

Overdrive inhibitor switch Lucas 34531 type, Replaces RTC1150

Push Pull Switch (BOW9996107)

Lucas SPB104 type wiper switch Replaces 2H4841

Horn Button (LUCSPB160)

Lucas switch SPB160 12v Horn Button 5amp

Overdrive Solenoid (BOW3905027)

12v Overdrive solenoid replaces LUCAS 76515 Jaguar application


12v Overdrive solenoid replaces LUCAS 76522 MGB application


12v Overdrive solenoid replaces LUCAS 76525 Austin Healey application

12v Solenoid (LUCSRB325)

(Lucas SRB325)12volt Attract voltage 5-5.4v Release voltage less than 3.5v Coil current drain 3.7A

12v Solenoid

12v Solenoid Similar to a Lucas OEM product for inertia starter motors

12v Solenoid

(Lucas SRB333 style) Attract voltage 5-5.4v Release voltage less than 3.5v Coil current drain 3.7A

12v Solenoid

(Lucas SRB319) Attract voltage 5-5.4v Release voltage less than 3.5v Coil current drain 3.7A

24v Solenoid (LUCSRB321)

(Lucas SRB321) Attract voltage 5-5.4v Release voltage less than 3.5v Coil current drain 3.7A

Control Box

Lucas NCB 144 12v regulator with lucar terminals

Control Box

4 pin version Lucas NCB 144 12v regulator with lucar terminals

Control Box

Lucas NCB 148 (also NCB143) 12v regulator with lucar terminals

Control Box

Lucas NCB 101 12v regulator with lucar terminals

Control Box

Lucas NCB 100 12v regulator with screw terminals

Control Box

Lucas type NCB 134/136 (11amp) 12v regulator with lucar terminals

Control Box

Lucas NCB 130/132 (22amp) 12v regulator with lucar terminals

Control Box

Lucas NCB 133 (30 amp) 12v regulator with lucar terminals

Control Box

Lucas NCB120 12v regulator 11 amp

Control Box

Lucas NVB112 12v regulator 11 amp

Ignition Coils

12v standard coil with screw top

Ignition Coil (LUCDLB101)

Lucas DLB101 ignition Coil

Ignition Coil

12V ballast coil (with fixing bracket) – (Lucas DLB102) for use on a ballast system where a resistor or resistance wire is used. Can diameter 55mm Coil Tower manufactured from phenolic

Ignition Coil

12V electronic coil (with fixing bracket) – (DLB 193) Can diameter 55mm Coil tower manufactured from polyester

Ballast Resistor

Ballast Resistor 1.5 Ohms

Rotor Arm

Rotor Arm Lucas DRB101 type

Rotor Arm

Lucas DRB117 type Rotor arm

Rotor Arm

Lucas DRB462 type Rotor Arm

Condenser

Lucas DCB101 TYPE

Condenser

Lucas DCB104 Type

Condenser

Lucas DCB112 Type

Condenser

Lucas DCB526 Type

Condenser

Lucas DCB703 Type

Condenser

Lucas DCJ233 Type

Condenser

Condenser (Unipart number GSC2122)

Condenser

Condenser (Unipart number GSC2182)

Distributor Cap

Distributor Cap Lucas DDB400 Type

Distributor Cap

Distributor Cap with cover Lucas DDB400 Type with cover)

Toggle Switch (BOW9996054)

Switch with On/Off Logo plate Switch On/Off: On/Off logo plate; chrome finish; 2-Terminals; 25x14mm. 11mm Ø

Toggle Switch (BOW9996050)

Switch On/Off with chrome finish Switch On/Off: chrome finish; 2-Terminals; 30x18xmm. 11mm Ø

Toggle Switch Miniature

Switch On/Off (miniature) Switch On/Off: sub-miniature; chrome finish; 2-Terminals. 8x5mm. 7mm Ø.

Switch Pull/Push (BOW9996040)

Switch On/Off pull/push, short Short neck heavy duty 12/24 volt, 240 watt 16 amps pull/push switch. Requires 8.5mm Ø fixing hole

Switch Pull/Push Illuminated

Switch On/Off pull/push, illuminated Illuminated pull/push switch in three colours, Amber, Green or Red lens. The smart button is 22mm Ø x 32mm. Requires 12.5mm Ø fixing hole; 8mm maximum panel thickness. Switch body 30mm x 20mm maximum.

Rotary Headlight Switch

Rotary headlight switch Positive action Off/On/On/On. 12/24 volt 130 watt. Black button 44mm long. Requires 26.5mm Ø fixing hole; 3.5mm maximum panel thickness. Switch body 38mm Ø.

Switch Pull/Push Headlight

Pull/push headlight switch Pull/push headlight switch 12/24 volt 139 watt. Requires 10.5mm Ø fixing hole; 7.5mm maximum panel thickness. Maximum switch dimensions 65mm x 30mm x 30mm.

Dipper Switch

Headlight foot operated dip switch. Robust positive action foot changeover switch. 12/24 volt 100 watt; surface mounted. 60mm overall height. Requires 2 x 5.5mm Ø fixing holes (or self-tapping screws approx. 25mm long) 38mm apart. Black knob.

Key Switch

Key switch On/Off. Two flat keys. Key switch 2-position On/Off. The key is removable in both the On and Off position.

Indicator Switch

Column indicator switch illuminated knob. Indicator Switch: column fixing with green illuminated knob.

Indicator Switch

Column indicator switch black knob Indicator Switch: column fixing with black knob.

Illuminated Indicator Switch

Illuminated. Indicator Switch: dashboard mounting with green illuminated knob.

Universal Dipper Switch

H/Lamp dipper switch Replaces Lucas 31284

Wash Wipe Products

Flat Wiper Blade

8" Black flat wiper blade

Flat Wiper Blade

10” Black flat wiper blade

Stainless Steel Wiper Arm (BOW5040007)

Wiper arm stainless steel suitable for LHD Mini approx, 270mm long.

Stainless Steel Wiper Arm (BOW5040008)

Wiper arm stainless steel suitable for RHD Mini approx, 270mm long.

Stainless Steel Wiper Blade 10” 5mm Fitment - (BOW5040000) 7mm Fitment - (BOW5040001)

10” Stainless steel wiper blade with 5mm or 7mm fitment

Stainless Steel Wiper Blade 11" 5mm Fitment - (BOW5040002) 7mm Fitment - (BOW5040003) 11” Stainless steel wiper blade with 5mm or 7mm fitment

Stainless Steel Wiper Blade 12” 5mm Fitment - (BOW5040004) 7mm Fitment - (BOW5040005)

12” Stainless steel wiper blade with 5mm or 7mm fitment

Stainless Steel Wiper Blade 15” (BOW5040006)

12” Stainless steel wiper blade with 7mm fitment

Stainless Steel Flat Blade 8”

8” Stainless steel flat blade with 5mm fitment


8” Stainless steel flat blade Spoon fitment

Stainless Steel Flat Blade 10” 10" stainless steel flat windscreen wiper blade. with 5mm spade end arm.


10” Stainless steel flat blade Spoon fitment

Windscreen Washer Pump

Washer pump (universal fitting) Washer pump: universal fitting; 2-Terminals.


Washer pump (universal fitting) Retro style direct fit pump Retro style windscreen washer pump. Replaces GWW1202


Washer pump (universal fitting) Retro style direct fit pump Retro style windscreen washer pump. Replaces GWW130

Washer Pump Range - DGEWP6 12v Austin / Rover / Bedford direct fit washer pump

Washer Pump Range - DGEWP12

12v Austin / Bedford / Yugo direct fit washer pump

Washer Bag

Washer pump & classic bag reservoir Screen washer pump with the original classic design reservoir. Comes complete with mounting bracket. It is easy to fit and requires very little space.

Washer Kit

This kit contains: 2 black double washer jets, a "T" piece, a straight connector, 1.8mtr plastic tube, a wiring loom, push switch, clips for the tube, a bracket, bolts and screws.


Washer pump (universal fitting) Retro style Retro style windscreen washer pump. Metal body similar to Lucas part number WSB100. Size 70 x 50mm over all.

Washer Bottle (BOW5051000) 1.2ltr bottle supplied with 12v pre fitted pump & fitting kit with jets

Washer Component DGWP1

Non return valve 4.7mm Lucas WSB143 Replaces Lucas WSB143


T. Piece connector 4.7mm


T. Piece Connector 4.7mm – 3.2mm


Elbow connector 90¢ª

Washer Component DGWP5 Reducer 5-6mm ID Tube

Washer Jet Black Twin

Black washer jet (double) Black high quality plastic construction with brass adjustable nozzles and brass nut. It is 10mm high x 10mm wide.


Single Jet


Single Jet - Plastic Lucas WSB146 type Replaces Lucas WSB146

Washer Jet Single

Washer Jet (single) Washer jet: single; chrome on brass. Lucas WSB136 type

Washer Jet Twin Chrome (BOW5051001)

Washer Jet (double) Washer jet: double; chrome on brass Lucas WSB129 type

Washer Jet Twin

Low profile washer jet (double) Washer jet: double; chrome on brass, low profile Lucas WSB131 type

Classic Accessories

Choke Cable

Choke cable – flexible Locking choke cable approx.1.5mtr long. Flexible inner cable. Soft touch knob with choke motif. Original equipment on many 70's cars and most BL vehicles

Bonnet Release Cable

Bonnet release cable – flexible "T" handle control cable with flexible inner cable. The "T" handle has the engine cover (bonnet) motif but this cable is useful for applications where a good pull may be required. 175mm (68")

Door Handle Trim

"Mini" door handle trim (Pair) Stainless steel "Mini" external door handle escutcheon plate. Beautifies and protects

GB Letters

Country designation letters. (GB plate) 3¼" (84mm) high Now stainless steel GB letters. Reproduction of the old "Desmo" item. Self-adhesive screwless fixing. Each letter is approximately 3¼" x 21/8" (84x53mm

GB Oval Oval GB countrydesignation Display it with pride! 100mm x 60mm (4" x 2½") approximately; it is really beautiful. Made from plastichrome, a non tarnishing, non rusting durable material. Apply by simply peeling off the backing film, position the GB and peel off the front film. That is all, it's done! This GB plate will always have the background colour of your car

Union Jack

Union Jack 3D chrome symbol New idea - A rendition of the Union Flag in chrome and the colour of the car. An eloquent, understated badge. It is made from plastichrome and measures 98mm x 55mm x 1.3mm thick. Simply peel the 3M backing away, apply to the car, then remove the front film.

Union Jack badge

Union Jack enamelled badge. Self adhesive back. An easy to fix self adhesive, deep lustre enamelled badge. 50 x 30mm

Tyre Valve Covers

Tyre valve covers (Set of 4) Chrome tyre valve caps and stem cover. Cap has sealing ring to prevent slow deflation should valve fail

Tyre Valve Covers

Tyre valve covers with UK flag (Set of 4) Chrome on brass tyre valve caps with smart Union Jack motif. Caps have a sealing ring to prevent slow deflation due to leaking tyre valves.

Tax Disc Holder

Tax disc holder. Powerful suction grip. Chrome knob has recess to take motif. (Not included) Bright polished stainless steel tax holder; attaches to windscreen by powerful suction simply by turning the chromed knob, here shown with A smart Union Jack motif (not included). 86mm diameter x approx. 27mm high.

Tax Disc Holder

Tax disc holder. Powerful suction grip. Black knob has recess to take motif. (Not included) Bright polished stainless steel tax holder; attaches to windscreen by powerful suction simply by turning the black knob, here shown with the MG motif (not included). 86mm diameter x approx. 27mm high.

Tax Disc Holder

Tax holder. Powerful suction grip. Chrome knob. Bright polished stainless steel tax holder; attaches to windscreen by powerful suction simply by turning the chromed knob. A "must" for any smart car

Universal Cable

Universal cable - stiff inner wire type Universal cable: stiff wire type. Approx. 6' Long. Plain black knob.

Sports Air Filter

A101 Sport Air Filter for 1¼" SU carburettor (Reference A101) Stainless Steel sport air filter 135mm (approx. 5½") x 25mm (1") suitable for 1¼"SU carburettor (offset)

Sports Air Filter

A102 Sport Air Filter for 1½" SU carburetor Stainless Steel sport air filter 155mm (approx. 5½") x 27mm (11/8") suitable for 1½" SU carburettor

Badge Bar (BOW5044000)

Badge bar with diecast brackets. Polished stainless steel badge bar with chromed end caps: The shaped diecast legs can be fitted angled forward or back. 610mm (24") - 560mm (22") - 457mm (18") 380mm (15")


Badge bar curved with diecast brackets. Polished stainless steel badge bar with chromed end caps; this bar has a slight curve to match some bumpers: The shaped diecast legs can be fitted angled forward or back. 610mm (24") - 560mm (22")


Mono leg badge bar with diecast bracket. 230mm (9") wide. Polished stainless steel badge bar with stainless steel end caps: The shaped diecast leg can be fitted angled forward or back. This "T" badge bar was popular with some old cars with two badges.

Badge Bar

Badge bar with SS brackets Polished stainless steel badge bar with chromed end caps and polished stainless steel brackets. The flat brackets allows this bar to be fitted behind the number plate using the existing bolts. Alternatively it can be fitted to the front of most bumpers.

Badge Bar Clip

Badge bar clip, s/steel. Badge bar clip in polished stainless steel including stainless steel bolts and nuts. 38mm long,for 20mm (3/4") badge bars. The bolts are located in slotted holes to accomodate badges with fixing hole centres 12mm to 22mm

> Both 7” & 9” Versions available

> Inox polished stainless steel (non rusting)

> Concaved glass lenses (both clear &

Yellow glass are available)

> H3 & H4 Bulb fitments

> Supplied with M12 mounting bolts

> New unpunctured wiring grommet

> E-Approved (7” H3 version only)

> 181mm (Dia) x 125mm (D) x 205mm (H)

Part Numbers:

SIM1.3205.0000000 (7” H3 Bulb Clear Lens)

SIM1.3205.0000100 (7” H3 Bulb Yellow Lens)

SIM1.3206.0000000 (7” Dipped H4 Bulb Clear Lens)

SIM1.3208.0000000 (9” H3 Bulb Clear Lens)

SIM1.3208.0000100 (9” H3 Bulb Yellow Lens)

www.bowersmidland.co.uk is your best online source for all new product launches, downloadable product catalogues, safety data sheets, corporate information, current special offers and publications

Prices & availability subject to change without notice. All prices are nett excluding vat. Care is taken to ensure the accuracy of descriptions and applications of each item within this publication. H. Bowers Ltd assumes no responsibility

for any possible errors. O.E.M. names and numbers are used for reference purposes only. All registered Trademarks are owned by their relevant companies. Photographs are intended for identification purposes only and may not

represent the specific product or part to be shipped. © Copyright H. Bowers Limited. Sales & Enquiries Telephone : 01782 590700 Fax : 01782 590712 E-mail : [email protected] Web : www.bowersmidland.co.uk

Bowers Postal Address : Stoke-on-Trent

H. Bowers Ltd, Normacot Rd, Longton

Stoke-on-Trent, Staffordshire, ST3 1PU

Bowers Department Tel & Fax Contacts

Sales Telephone 01782 590700

Sales Fax 01782 590712

Workshop Telephone 01782 590702

Workshop Fax 01782 598516

Marketing Telephone 01782 590707

Main Telephone 01782 599990

Bowers Website and E-Mail Contacts

E-Mail [email protected]

Website www.bowerspartsonline.co.uk

Bowers Hours of Business : Mon - Sat

Monday - Thursday 08:30 - 17:30

Friday 08:30 - 17:00

Friday Workshop 08:30 - 16:30

Saturday 08:30 - 12:00

Saturday Workshop Appointment

Ancillary Products

Cable, solenoids, connectors, pumps,

fuses, plugs, inverters, reversing aids,

switches, sockets, etc.

Lighting Products

Rear lamps, front lamps, worklamps,

marker lamps, beacons, reflectors,

interior lighting, LED lamps, etc.

Rotating Electrics

Large range of outright & exchange,

alternators, starter motors, DC Motors

and dynamos inc cross reference list.

Bus & Coach Products

Outright & exchange alternators and

starter motors, Eberspacher heating

systems, Webasto heating systems.

Heavy Industrial...


starter motors, traction motors, relays,

switches, solenoids, accessories, etc.

Specialised Rotating Elec.

Outright and exchange alternators,

starter motors and traction motors with

specialised applications.

Product Directory

A concise list of all of our product lines

and groups listed in alphabetical order

for easy use.

Follow H. Bowers Ltd on our social networking pages for general updates and the latest new product information

Cibie Oscar Replica

Spot Lights

Bowers Providing Quality, Reliability & Service Since 1939

> Replaces Lucas LRD100 dynamo

> Brand new unit not reconditioned

> 12v

> 22A

Part Number: BDO5003










Sales Fax 01782 590712










Friday 08:30 - 17:00


Saturday 08:30 - 12:00


Ancillary Products




Lighting Products




Rotating Electrics








Heavy Industrial...








Product Directory



for easy use.


C40 Dynamo

New Outright Unit


Classic Alternators

The H. Bowers website www.bowersmidland.co.uk is your best online source for all new product launches, downloadable product catalogues, safety data sheets, corporate information, special offers & publications with an easy to use online quotation facility

Prices & availability subject to change without notice. All prices are nett excluding vat. Care is taken to ensure the accuracy of descriptions and applications of each item within this publication. H. Bowers Ltd assumes no responsibility for any possible errors. O.E.M. names and

numbers are used for reference purposes only. All registered Trademarks are owned by their relevant companies. Photographs are intended for identification purposes only and may not represent the specific product or part to be shipped. © Copyright H. Bowers Limited 2013






Sales Fax 01782 590712










Friday 08:30 - 17:00


Saturday 08:30 - 12:00


Ancillary Products




Lighting Products




Rotating Electrics








Heavy Industrial...








Product Directory



for easy use.

Trade and distributor accounts on request

Contact our sales dept for more information

Our vast product knowledge and marketplace experience allows us to provide real assistance to our customers

Follow our social media pages Achilles Registered : 706487 Go Green! Please recycle this H. Bowers flyer

Part Number: BAO3001

Lucas A127 Style (Right Hand) Complete

with Fan & Pulley

Voltage: 12v

Amperage: 75A



Lucas A127 Style (Left Hand) Complete

with Fan & Pulley

Voltage: 12v

Amperage: 75A


18ACR Style (Left Hand) Complete

with Fan & Pulley

Voltage: 12v

Amperage: 50A


18ACR Style (Right Hand) Complete

with Fan & Pulley

Voltage: 12v

Amperage: 50A

> Max power 4 x 75WATT

> Plays USB and SD (up to 16GB)

> CD, MP3 and WMA playback

> ID-Tag

> Aux-in 3.5mm stereo jack

> 18FM & 6AM Presets

> RDS EON Radio function

> RCA Output

> Detachable flip-down front panel

> Built-in ISO connector

Part Number: FERCALRCD110










Sales Fax 01782 590712










Friday 08:30 - 17:00


Saturday 08:30 - 12:00


Ancillary Products




Lighting Products




Rotating Electrics








Heavy Industrial...








Product Directory



for easy use.


Retro Look Chrome

CD/USB/SD Radio





> ID-Tag


> 18FM & 6AM Presets


> RCA Output


> Built-in ISO connector

Part Number: FERCALRCD110B










Sales Fax 01782 590712










Friday 08:30 - 17:00


Saturday 08:30 - 12:00


Ancillary Products




Lighting Products




Rotating Electrics








Heavy Industrial...








Product Directory



for easy use.


Retro Look Black

CD/USB/SD Radio



> LCD Display



> ID-Tag


> Wireless bluetooth handsfree calling

> A2DP + AVRCP audio streaming

> 18FM Presets


> 4 Band preset equalizer

> RCA Output


> ISO Connector

Part Number: FERCALRCD120BT (Chrome) FERCALRCD120BT/B (Black)










Sales Fax 01782 590712










Friday 08:30 - 17:00


Saturday 08:30 - 12:00


Ancillary Products




Lighting Products




Rotating Electrics








Heavy Industrial...








Product Directory



for easy use.


Retro Look Bluetooth

CD/USB/SD Radio











Sales Fax 01782 590712







Website www.bowersmidland.co.uk



Friday 08:30 - 17:00


Saturday 08:30 - 12:00


Ancillary Products




Lighting Products




Rotating Electrics








Heavy Industrial...








Product Directory



for easy use.


Classic Car Service

DO YOU OWN A TRUE CLASSIC?Look after your pride and joy with our classic car service & repair facility. Our fully trained

workshop technicians can repair most starter motors, alternators and dynamos giving your

old classic a new lease of life.

Outright units for classic cars can be very hard to find and you will often also have to pay

high, inflated prices. Our workshop facility is here to help. We can repair your faulty unit

which is often considerably more cost effective than buying a replacement part outright.

FOR MORE INFORMATIONPlease contact us using the following methods

Tel 01782 590702

Fax 01782 598516

Email [email protected]

“ We Are “Here To

Help


Sa

les T

el : 0

17

82

59

07

00

Sa

les F

ax : 0

17

82

59

07

12

sa

les@

bo

we

rsm

idla

nd

.co

.uk

ww

w.b

ow

ers

mid

lan

d.c

o.u

kWorkshop H. Bowers Ltd Workshop Repair Facility

W.i Workshop Fax : 01782 598516 Bus & Coach

Workshop Service & Repair Facility

More than just just an automotive

components distributors

Air Conditioning Units / Heater Systems

Our fully trained workshop technicians have vast

experience working with both Eberspacher and

Webasto equipment.

Rotating Electrics

Can’t source a unit? Or is it too expensive to

buy? Let our trained staff repair your old unit.

We have the knowledge & experience to help.

Shown on this page are images of equipment

that we regularly carry out work on

Sa

les T

el : 0

17

82

59

07

00

Sa

les F

ax : 0

17

82

59

07

12

sa

les@

bo

we

rsm

idla

nd

.co

.uk

ww

w.b

ow

ers

mid

lan

d.c

o.u

kH. Bowers Ltd Workshop Repair Facility Workshop

Bus & Coach Workshop Fax : 01782 598516 W.ii

Workshop Contacts

Workshop Telephone : 01782 590702

Workshop Fax : 01782 598516

Ian Simpson

Service Manager & Technical Enquiries

Doug Roberts

Bowers Auto-Electrician

Bob Boughey

Bowers Auto-Electrician

www.bowersmidland.co.uk is your best online source for all our new product launches, downloadable / searchable / printable product catalogues, safety data sheets, corporate information, current special offers and all our publications


numbers are used for reference purposes only. All registered Trademarks are owned by their relevant companies. Photographs are intended for identification purposes only and may not represent the specific product or part to be shipped. © Copyright H. Bowers Limited 2012.

All Sales & Enquiries - Telephone : 01782 590700 Fax : 01782 590712 E-mail : [email protected] All Technical Enquiries - Telephone : 01782 590702 Fax : 01782 XXXXX XXXXXX - Switchboard : 01782 599990 - Visit Our Website : www.bowersmidland.co.uk

Follow H. Bowers on our social networking pages for general updates, special offers & the latest new product information

Bowers Through The Ages

Automotive Components Distributor : Since 1939

1939 1939 1948

1974 1977 1987

1987

Present Day : Workshop

Present Day

Sales & Marketing Accounts Office

The H. Bowers Ever Growing Fleet






H. Bowers - A Brief Overview : Pt 1


Harry Bowers who was a skilled auto electrician founded H. Bowers Limited in 1939. His customer base consisted of all the local utilities

ie. Electricity Board, Gas Board, Water Board, National Coal Board, City and County Councils, Fire, Police and Ambulance authorities

with whom he held supply and maintenance agreements. It also included fleet operators and general garage repair shops.

He traded successfully until 1968 when my late father who ran his own vehicle repair workshop in Stoke-on-Trent purchased the business

from him. My father ran the business from a supervisory only point of view for a period of one year when he suffered a major heart

attack. At this point in time I was working for him as a mechanic. Due to his heart condition putting him out of action for a considerable

period of time it was decided that I would have to take over the supervisory role previously carried out by him.

Once a week it was my responsibility to visit key customers to obtain orders and to promote the business. I was quite keen to develop

the already well established heavy commercial and heavy plant sectors of the business albeit this meant working long and unsociable

hours.

As a result of our involvement with the National Coal Board in repairing their heavy mobile plant and the work that we were carrying out

for many open cast coal contractors who were operating in the surrounding area plus the majority of the limestone quarries in the nearby

peak district we were very strong and conversant with American Delco Remy equipment which was to be found on Caterpillar, Terex,

Cummins and Detroit Diesel engines.

It became evident to me that there was a demand nationally for the products that we were supplying on a day to day basis to this type

of customer in our own locality.

At this point I decided to promote the sale of Delco Remy products to other auto electrical specialists throughout the country which

proved extremely successful and became the foundation for our national distribution business. It was not long before the Lucas Industries

company owned subsidiary Lucas Service (LSUK) became our single largest customer.

Having set out to promote the American Delco Remy product throughout the UK, it came as a surprise to find that we were getting

numerous enquiries for products manufactured by many other leading companies i.e. Lucas, C.A.V., Bosch, Hella, Rubbolite,

Eberspacher, Butec (now Prestolite), Denso, Nikko, Sawafuji etc, etc.

Due to our extensive stock holding and in depth product knowledge, we were able to satisfy this demand and it just grew from there. We

were even supplying Lucas parts to Lucas.

In the very early days we were agents for A.C. Delco which was the light vehicle equipment produced by General Motors, however due

to our experience with the American product it was not too long before we were promoted to the status of 5 star distributor by Delco

Remy USA. This enabled us to procure product manufactured by them through their European distribution centre in Antwerp. At this

time we were one of only fifteen 5 star distributors in the UK authorised by Delco Remy to handle product, service and warranty on their

behalf. Latterly we became the only active 5 star distributor remaining in the country.

From 1939 the business traded from its original premises in Gower Street, Longton and relocated to the existing site in 1977. The

premises have been continually extended and upgraded ever since.

Continued Overleaf...






H. Bowers - A Brief Overview : Pt 2


1975 saw us appointed as one of the first Distributors for Butec Electrics, this being the company formed by Leyland Truck and Bus to

manufacture rotating electrics for their own vehicles, under licence from Leece Neville of the States. This equipment is now better known

as Prestolite.

1978 appointed Delco Remy Five Star distributor.

In 1980 we were appointed as one of the very first Eberspacher dealers for the country, a distributorship that we have constantly

developed year on year to a point where we are now in the top three nationwide.

In 1987 we were awarded the Bosch distributorship for Staffordshire, Cheshire, Shropshire and Mid Wales.

To cater for the growth of the Bosch range we decided to form a new company, Midland Continental Limited. This business traded from

a separate location in Longton and has now merged back with H. Bowers Ltd at our sole premises in Normacot Road, Longton.

In 1988 we secured the Lucas CAV franchises for Staffordshire and the surrounding areas.

In addition to the above, we have long standing supply agreements with companies in Canada who supply American manufactured

product. We have traded with Wilson and R.C.P. for the best part of thirty years.

We are the leading U.K. distributors for Lucas Elektrik of Turkey. This was formerly a Lucas Industries owned company which was taken

over by the management in recent years.

We are the largest independent U.K. customer of Iskra Autoelektrika of Slovenia. They produce rotating electrics for O.E. supply to the

likes of Deutz, John Deere, J.C.B., Perkins and many more high profile vehicle and machinery manufacturers. Iskra also purchased the

DC motor business, previously owned by Robert Bosch and produce DC motors for many O.E. electric vehicle builders. By the end of

2006 they were supplying in the region of sixty thousand Alternators and Starter Motors a month to Deutz.

Since I became involved in the business back in 1969 I have always had three main principles and objectives in mind. They are,

1. To provide an unrivaled service that can not be bettered.

2. To sell only top quality products.

3. To offer the most competitive prices.

Always in that order and with absolutely no compromise.

After all, when you are dealing with heavy earthmoving companies and they have a CAT D9 broken down in a quarry in the early hours

of a Sunday morning and it needs a starter quickly, then price is not the deciding factor, availability of a quality product is. That means

getting out of your bed and providing off the shelf delivery seven days and seven nights a week. This is something that we have always

done and always will. This is what I call real customer service and what we genuinely pride ourselves on. Something that others may

think they offer but when put to the test seldom in this day and age do they.

J.C. Savage

H. Bowers Ltd Managing Director

5.02

Automotive Components Distributors

www.bowersmidland.co.uk

H. Bowers Ltd, Normacot Road, Longton, Stoke-on-Trent, Staffordshire, ST3 1PU

Classic Car Parts & Accessories - Bowers : · PDF fileLighting Small chrome Driving Lamps...

Documents

Transcript of Classic Car Parts & Accessories - Bowers : · PDF fileLighting Small chrome Driving Lamps...