Clamp on Current Transformers
1
Tel: +86-533-3818450 Fax: +86-533-3818724 Email: [email protected] Clamp on Current Transformers \ Clamp on Current Transformers Features ● Low cost. ● 6 standard size ● Clamp-on core design,safer,easier installation, portable ● Both Silicon Steel & Nickel Alloy cores available Applications ● Silicon Steel cores provide moderate accuracy and lower cost for appropriate current measurement current ● Nickel Alloy cores are suitable for applications that require the highest accuracy with minimal phase angle error. Applications would include electric power quality monitoring devices Specifications ● Case material:Polypropylene resin ● Voltage rank:600Vac(isolated condition), 30Vac(bareness condition) ● High Potential:2500Volts/min ● Dielectric Resistance:1000MOhms @ 500 Vdc ● Operating Temperature:-25℃ to +70℃ ● Frequency:50 /60 Hz ● RoHS compliant ● CE-approved Typical Products Photograph Part Number Rated Input (A) Turn Ratio Frequency ( Hz ) Secondary Burden Resistance (Ohms) Accuracy Class Outline Dimensions (mm) pdf CTC0080N 1~50 1:1000 1:2000 1:2500 ... 50 to 400 ≤50 0.1 0.2 ID-L-W-H 8.0-46.0-27.0- 171 CTC0130N 5~200 50 to 400 ≤5 0.1 0.2 ID-L-W-H 13.0-52.0-27.0- 174 CTC0200N 5~200 50 to 400 ≤5 0.1 0.2 ID-L-W-H 20.0-52.0-27.0- 180 LCTC-0250 Input:100A Output:0.333, 1.5V -- 50 to 1K ≥100k 1.0 ID-L-W-H 25.0-50.0-19.5- 87 Page 1 of 1 Clamp on current transformers-yuanxing electronics 8/29/2014 http://www.yuanxing.net/4.asp
-
Upload
anonymous-djyuu5ymd -
Category
Documents
-
view
5 -
download
1
description
Clamp on Current Transformers
Transcript of Clamp on Current Transformers
-
Tel: +86-533-3818450Fax: +86-533-3818724Email: [email protected]
Clamp on Current Transformers \ Clamp on Current Transformers
Features Low cost. 6 standard size Clamp-on core design,safer,easier installation, portable Both Silicon Steel & Nickel Alloy cores available Applications Silicon Steel cores provide moderate accuracy and lower cost for appropriate current measurement current Nickel Alloy cores are suitable for applications that require the highest accuracy with minimal phase angle error. Applications would include electric power quality monitoring devices Specifications Case material:Polypropylene resin Voltage rank:600Vac(isolated condition), 30Vac(bareness condition) High Potential:2500Volts/min Dielectric Resistance:1000MOhms @ 500 Vdc Operating Temperature:-25 to +70 Frequency:50 /60 Hz RoHS compliant CE-approved
Typical Products
Photograph Part Number
Rated Input (A)
Turn Ratio
Frequency( Hz )
SecondaryBurden
Resistance(Ohms)
Accuracy Class
Outline Dimensions
(mm)pdf
CTC0080N 1~50
1:10001:20001:2500
...
50 to 400 50 0.1 0.2
ID-L-W-H 8.0-46.0-27.0-
171
CTC0130N 5~200 50 to 400 5 0.1 0.2
ID-L-W-H 13.0-52.0-27.0-
174
CTC0200N 5~200 50 to 400 5 0.1 0.2
ID-L-W-H 20.0-52.0-27.0-
180
LCTC-0250 Input:100A Output:0.333,1.5V
-- 50 to 1K 100k 1.0ID-L-W-H
25.0-50.0-19.5-87
Page 1 of 1Clamp on current transformers-yuanxing electronics
8/29/2014http://www.yuanxing.net/4.asp
