Cell StructureCell FunctionsCell Movement 100 200 300 400 500 600 700 800 900 1000.
CL4403 AUTOPLEX System 1000 Series II Cell Site Installation Testing Student Guide
Transcript of CL4403 AUTOPLEX System 1000 Series II Cell Site Installation Testing Student Guide
5/11/2018 CL4403 AUTOPLEX System 1000 Series II Cell Site Installation Testing Student Guide - ...
http://slidepdf.com/reader/full/cl4403-autoplex-system-1000-series-ii-cell-site-installation-testin
CL4403 - Autoplex ® System 1000 Series II Cell Site Installation
Read-Me-First Guide
CL4403
AUTOPLEX® SYSTEM 1000 SERIES
II CELL SITE INSTALLATION
READ- ME - FIRST
DOCUMENTATION
THIS READ-ME-FIRST PACKAGE IS INTENDED FOR USE WITH
DISKETTE ASSESSMENTS ONLY
5/11/2018 CL4403 AUTOPLEX System 1000 Series II Cell Site Installation Testing Student Guide - ...
http://slidepdf.com/reader/full/cl4403-autoplex-system-1000-series-ii-cell-site-installation-testin
CL4403 - Autoplex ® System 1000 Series II Cell Site Installation
Read-Me-First Guide
Copyright © 1999 Lucent Technologies. All rights reserved.
This material is protected by the copyright laws of the United States and other countries. Itmay not be
reproduced, distributed, or altered inany fashion by any entity (either internal or external to Lucent
Technol og ie s) , e xc ep t in accordance with a pp lic ab le a gr eemen ts , c on tr ac ts o r l ic en si ng , w it ho ut t he e xp re ss
w ritten con sen t of the C ustom er T rain ing and In form ation P rod ucts orga nization an d the b usiness m an agem en t
owne r o f t he ma te ria l.
Notice
E very effort w as m ade to en su re th at the inform atio n in t hi s c us tomer i nf ormat io n p ro du ct (eIP) wa s c omp le te
a nd accu rate at th e tim e of relea se. H ow ever, in fo rm ation is s ub je ct t o c ha ng e.
T he trainin g co urses an d assessm en t m ateria l we offer are intended to supplem ent, but not replace on the job
training. The development and mastery of the skills can only occur with practice and effective on the job
su pe rv isio n a nd in str uc tio n. L uc en t m ak es n o r ep re sen ta tio ns o r w ar ra ntie s with respect to the job perform ance of
students to whom training has been granted. Lucent assumes no liability due to the use or application of this
t ra in in g o r a ss es sment ma te ria l.
Trademarks
Windows is a r eg iste re d tr ad em ar k o f M ic ro so ft C or po ra tio n.
Ordering Information and Testing Telephone Number
To order a copy of the CL4403 video tape, call Lucent Technologies at l-888-LUCENT8, prompt 2 and specify
course CL4403.
Support Telephone Numbers
L ucen t T ech nolog ies p ro vid es a teleph on e n umber for yo u to use. T he su ppo rt telep ho ne n umber is
1-800-438-7911
5/11/2018 CL4403 AUTOPLEX System 1000 Series II Cell Site Installation Testing Student Guide - ...
http://slidepdf.com/reader/full/cl4403-autoplex-system-1000-series-ii-cell-site-installation-testin
CL4403 - Autoplex ® System 1000 Series II Cell Site Installation
Read-Me-First Guide
TABLE OF CONTENTS
INVENTORY
EQUIPMENT REQUIRED
General
PC specifications
GENERAL INFORMATION 3
Unlimited attempts
Use of the mouseExiting the assessment
Ass es sment c rit er ia
Encryption feature
HOW TO INSTALL THE CL4403 ASSESSMENT
FOR WINDOWS s.i4
Before you begin
Getting started
Running the setup routine
Specify the installation directory
Completed installation
Start the assessment
HOW TO INSTALL THE CL4403 ASSESSMENT
FOR WINDOWS 95
5
Before you begin
Getting started
Running the setup routine
Specify the installation directory
Completed installation
Start the assessment
HOW TO GET CREDIT FOR TillS ASSESSMENT
Return the Student Key Diskette
Summary sheet
HOW TO GET TECHNICAL HELP 7
Check the Solutions Table
Call the hotline
Solutions Table
FREQUENTLY ASKED QUESTIONS
5/11/2018 CL4403 AUTOPLEX System 1000 Series II Cell Site Installation Testing Student Guide - ...
http://slidepdf.com/reader/full/cl4403-autoplex-system-1000-series-ii-cell-site-installation-testin
5/11/2018 CL4403 AUTOPLEX System 1000 Series II Cell Site Installation Testing Student Guide - ...
http://slidepdf.com/reader/full/cl4403-autoplex-system-1000-series-ii-cell-site-installation-testin
INVENTORY
Package
contents
SSQform
Course credit
CL4403 - Autoplex® System 1000 Series II Cell Site Installation
Read-Me-First Guide
Please check the contents of this package before you continue.
Although all items were carefully checked when packed, it is
possible that you did not receive everything required. The following
items are required to complete this course:
• One course CL4403, Autoplex® System 1000 Series II Cell
Site Installation Read-Me-First Guide (this document)
One video tape
• One Student Guide
Six diskettes labeled course CL4403 Assessment (diskette I
through 6)
One diskette labeled course CL4403 Student Key Diskette
One course CL4403 self-addressed return mailer
One Student Satisfaction Questionnaire for Multimedia
One pre-addressed envelope to return questionnaire
This form is to be returned to the SSQ Coordinator in the enclosed
envelope to help us monitor the quality of this course and
assessment.
Upon successful completion of this course, students who are
employees of Lucent Techoologies will have their training profiles
updated. Students who are not employees of Lucent Techoologies
should take appropriate actions to update their company's training
records.
5/11/2018 CL4403 AUTOPLEX System 1000 Series II Cell Site Installation Testing Student Guide - ...
http://slidepdf.com/reader/full/cl4403-autoplex-system-1000-series-ii-cell-site-installation-testin
C L440 3 - A utop lex ® System 10 00 Series II C ell Site In stallation
R ea d-M e -F irs t G u id e
EQID PMENT REQ IDRED
General
PC
specifications
The CL4403 - Autoplex® System 1000 Series II Cell Site
Installation assessment is delivered on diskette and is designed to
work with standard PCs using standard Windows* conventions.
486DX66 or better processor
DOS 6.0 or better
Windows 3.1 or better
8MBRAM
Hard drive with 10 MB available
3.5" floppy drive
VGA monitor - 800x600x256 colors or better
Mouse
NOTE: These are suggested minimum specifications for a platform
that will execute the assessment in an acceptable fashion. Use of a
platform with less than the recommended specifications will result
indegraded performance - usually manifested in slower access to
assessment contents and/or degraded sound quality and playback.
If you DO NOT have stated hardware/software, your access to the
assessment may be degraded or non-functionaL
* Windows is a re gister ed tra dem ark o f M icro so ft C orp or ation
5/11/2018 CL4403 AUTOPLEX System 1000 Series II Cell Site Installation Testing Student Guide - ...
http://slidepdf.com/reader/full/cl4403-autoplex-system-1000-series-ii-cell-site-installation-testin
CL4403 - Autoplex® System 1000 Series II Cell Site Installation
Read-Me-First Guide
GENERAL INFORMATION
Unlimited
attempts
Use of the mouse
Exiting the
assessment
Assessment
criteria
Encryption
feature
You will be given unlimited attempts to master this assessment.
Please follow the directions for returning your Student Key
Diskette listed on page 6.
The assessment may run slower on some computers than other
computers.
Clicking once on a button will activate it. Do not continue clicking
on a button because each click will produce a response. Please be
patient!
After the feedback appears on the screen, please click on the screen,
then click on the next button to move to the next question.
You MAY NOT exit the assessment until you complete the it. At
that time, you may take the assessment again or exit.
You must obtain a score of 80% to master this assessment.
The Student Key Diskette is encrypted and any attempt to alter the
information on the Student Key Diskette will result in an invalid
assessment and no certificate will be issued until you send the
Student Key Diskette back to be reset and retake the test.
If you have any trouble loading or using the assessment, please call
1-800-438-7911.
5/11/2018 CL4403 AUTOPLEX System 1000 Series II Cell Site Installation Testing Student Guide - ...
http://slidepdf.com/reader/full/cl4403-autoplex-system-1000-series-ii-cell-site-installation-testi
CL4403 - Autopiex® System 1000 Series II Cell Site Installation
Read-Me-First Guide
HOW TO INSTALL THE CL4403 ASSESSMENTFORnqNDOWS3~.1~ __
Before you begin
Getting started
Running the setup
routine
Specify the
installation
directory
Completed
iustallation
Start the
assessment
The installation procedure takes less than 10 minutes.
DO NOT load the assessment on more than one machine. Your
results will not be valid if you use more than one machine.
Insert Diskette I, CL4403, Autoplex® System 1000 Series II Cell
Site Installation into your a: drive.
Start Windows application if not already started (type win at the C:\prompt).
Click on File in the Program Manager menu bar (at the top of the
screen). A menu will appear.
From the File menu in the Program Manager window, choose Run.
A dialog box will appear.
In the dialog box, type: A:\setup in the Command Line box, then
click on OK.
You will see "Installing CL4403 Assessment". Click on Next.
"Select Directory" screen will then appear. Click on Next.
A "Confirm Entry" screen will appear. Click on Yes.
Next is the "Setup Options" screen. Click on Typical install. This
will begin the installation.
Follow the prompts to insert diskettes as requested. You may not
be required to install all of the diskettes included.
Upon the completion of the installation of CL4403 Assessment you
will be asked to click on Finish.
To start the assessment, click on Start. Move your mouse to
Programs, then to CL4403 Assessment, then to Autoplex® System
1000 Series II Cell Site Installation Assessment and click. This
will begin your assessment. Make sure that the Student Key
Diskette is in your A: drive.
4
5/11/2018 CL4403 AUTOPLEX System 1000 Series II Cell Site Installation Testing Student Guide - ...
http://slidepdf.com/reader/full/cl4403-autoplex-system-1000-series-ii-cell-site-installation-testin
CL4403 - Autoplex® System 1000 Series II Cell Site Installation
Read-Me-First Guide
HOW TO INSTALL THE CL4403 ASSESSMENTFOR WINDOWS 95
Before you begin The installation procedure takes less than 10 minutes.
DO NOT load the assessment on more than one machine. Your
results will not be valid if you use more than one machine.
Getting started Insert Diskette 1, CL4403, Autoplex® System 1000 Series II Cell
Site Installation into your a: drive.
Running the setup Click on Start. A menu will appear.
routine
Specify the
installation
directory
Completed
installation
Start the
assessment
From the Start menu choose Run. A dialog box will appear.
In the dialog box, type: A:\setup.exe in the Open box, then click
on OK.
You will see "Installing CL4403 Assessment". Click on Next.
"Select Directory" screen will then appear. Click on Next.
A "Confirm Entry" screen will appear. Click on Yes.
Next is the "Setup Options" screen. Click on Typical install. This
will begin the installation.
Follow the prompts to insert diskettes as requested. You may not
be required to install all of the diskettes included.
Upon the completion of the installation ofCL4403 you will be
asked to click on Finish.
To start the assessment, click on Start. Move your mouse to
Programs, then to CL4403 Assessment, then to Autoplex® System
1000 Series II Cell Site Installation Assessment and click. This
will begin your assessment. Make sure that the Student Key
Diskette is in your A: drive.
5/11/2018 CL4403 AUTOPLEX System 1000 Series II Cell Site Installation Testing Student Guide - ...
http://slidepdf.com/reader/full/cl4403-autoplex-system-1000-series-ii-cell-site-installation-testin
CL4403 - Autoplex® System 1000 Series II Cell Site Installation
Read-Me-First Guide
HOW TO GET CREDIT FOR TmS ASSESSMENT
Return the
Student Key
Diskette
The enclosed Student Key Diskette MUST be used for assessment
results to receive credit for this course. If you return your
assessment on a diskette other than the one enclosed, your results
will not be scored.
Upon completion of your assessment, place your Student Key
Diskette in the enclosed, pre-addressed mailer and return to:
Lucent Technologies
CBT Testing Coordinator
240 E. Central Parkway
Altamonte Springs, FL 32701
Summary sheet A summary sheet will be generated at the end of your assessment
that you may print. Please print this sheet to serve as your
temporary record of completion. You MUST be directly connected
to a printer or connected to a system printer to use this option. If
you are NOT connected to a printer DO NOT use this option. You
will receive an error message.
A certificate will be issued to you upon successfully completing the
assessment in the name and address provided in your registration
information. This information will be taken directly from your
registration, so please enter this information as you wish your
certificate to appear.
NOTE: Credit for course completion will only be given for
persons who have registered and paid for the course materials. If
you have reviewed a copy of the course obtained by your
supervisor or peers and would like to take the assessment and to
receive credit for the course, you may register by calling 1-888-
LUCENTS, prompt 2, and specifying course CL4403.
5/11/2018 CL4403 AUTOPLEX System 1000 Series II Cell Site Installation Testing Student Guide - ...
http://slidepdf.com/reader/full/cl4403-autoplex-system-1000-series-ii-cell-site-installation-testin
CL4403 - Autoplex® System 1000 Series II Cell Site Installation
Read-Me-First Guide
HOW TO GET TECHNICAL HELP
Check the If you are experiencing difficulty, please scan through the Solutions
Solutions Table Table on the next page. You may find the solution to your problem
and be up and running in minutes.
If the Solutions Table does not help, call the hotline number listed
below.
Call the hotline If you have technical questions (for example, Is my PC compatible
with the list of requirements? Why doesn't this assessment run
correctly?) contact our Technical Support Hotline for help.
Call 1-800-438-7911.
If you do call the hotline number, be prepared to identify:
the type of equipment on which you are running the courseware
• the course number
• the specific error messages that you have observed
any specific conditions that existed at the time the error
message occurred
This will enable the hotline personnel to help you in the most
efficient manner.
7
5/11/2018 CL4403 AUTOPLEX System 1000 Series II Cell Site Installation Testing Student Guide - ...
http://slidepdf.com/reader/full/cl4403-autoplex-system-1000-series-ii-cell-site-installation-testin
CL4403 - Autoplex® System 1000 Series II Cell Site Installation
Read-Me-First Guide
SOLUTIONS TABLE
Use this table for common error messages and solutions.
IF the message is ... THEN ...
"Cannot read from drive A" • Make sure your Student Key Diskette is in the drive with the(where A is your 3.5" label facing up. Click on Retry to try again,
diskette drive) OR
• Check the physical connection between the computer and the
A drive.
"Insufficient Memory to Run • Close one or more applications (network connections, TSRThis Application" (Windows programs) then try to run the application again,
application does not have OR
enough available memory to • Refer to the Windows Users Guide for more information onrun the application) how to proceed.
"Cannot find file (or one of You have an incorrect diskette loaded in the drive. Load the
its components). Check to appropriate diskette with the label facing up.
ensure the path and filename
are correct and that allrequired libraries are
available.
I F _ . . THEN ...
The color combination is A different screen driver and/or new color set (customized
unpleasant. within the Windows control Panel/Color application) may help
this situation.
The background or other A different screen driver with 256 colors is required.
color component is grainy.