CJ-200 Water-Based Adhesive Primer MSDScorkjoint.com/wp-content/uploads/2018/02/CJ-200... ·...

Issue Date : 26/04/2016 Revision Date : 28/04/2016 Page : 1 of 10

MATERIAL SAFETY DATA SHEETCJ-200 ADHESIVE

SECTION 1. SUPPLIER IDENTIFICATION Name : Corkjoint (Malaysia) Sdn Bhd Corkjoint (Singapore) Pte Ltd Address : No. 51, Jalan BRP 8/2, 10, Admiralty Street, #03-82 Bukit Rahman Putra Industrial Park, North Link Building, 47000 Sungai Buloh, Singapore 757695

Selangor Darul Ehsan

Note: The details and information stated within this MSDS have been provided by the manufacturer. Manufacturer’s Reference Number: 26/04/2016

Refer to www.corkjoint.com to obtain the most recent MSDS.

Product Name :

: CJ-200 Water Based Adhesive Primer

Manufacturer’s Reference 26/04/2016

SECTION 2. HAZARDS IDENTIFICATION

OSHA/HCS status

Classification of the substance or mixtureGHS label elements Signal word Hazard statements Precautionary statements General

Prevention Response Storage Disposal Hazards not otherwise classified

:

:

::

:

:::::

While this material is not considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200), this MSDS contains valuable information critical to the safe handling and proper use of the product. This MSDS should be retained and available for employees and other users of this product.Not Classified.

No signal word.No known significant effects or critical hazards.

Read label before use. Keep out of reach of children. If medical advice is needed,have product container or label at hand.Not applicableNot applicableNot applicableNot applicableNone known

SECTION 1.1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/ UNDERTAKING

CORKJOINT (MALAYSIA) SDN BHD 383102-H

CORKJOINT (SINGAPORE) PTE LTD 200716724-K

e [email protected] www.corkjoint.com

The information and the recommendations relating to the application and end use of this product are given in good faith and are based on the information provided by the manufacturer of the product and / or the Company’s current knowledge and experience in connection with the product when properly stored, handled and applied under normal conditions and no liability of final function at the job site is assumed. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability of or fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written and / or oral recommendations, or from any other advice offered by the Company. No responsibility or liability by the Company will be accepted for misuse, misreading or derivation from the recommended guidelines in respect of this product and the user shall determine the suitability of the product for his intended use and assume all risks and liability in connection therewith. The information contained in this brochure may change at any time without notice.


of 10

Indication of immediate medical attention and special treatment needed, if necessary Notes to physician

Specific treatments

: :

In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours.No specific treatment.

Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training.

See toxicological information (Section11)

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Any concentration shown as a range is to protect confidentiality or is due to batch variation.There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.

Substance/mixtureOther means of identificationCAS number/other identifiers CAS number Product code

::

::

MixtureNot available

Not applicableNot available

Ingredient name % CAS number

There are no hazardous ingredients present

Occupational exposure limits, if available, are listed in Section 8.

SECTION 4. FIRST AID MEASURES

Eye contact

Inhalation Skin contact Ingestion

:

:::

Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation occurs.Not a likely route of exposure.Wash contaminated skin with soap and water. Get medical attention if symptoms occur.Wash mouth out with water. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur.

Description of necessary first aid measures






of 10

SECTION 5. FIREFIGHTING MEASURES

Extinguishing media Suitable extinguishing media Unsuitable extinguishing media Specific hazards arising from the chemical Hazardous thermal decomposition products

Special protective actions for firefighters Special protective equipment for firefighters

: :

:

:

:

:

Carbon dioxide, dry chemical, foam and water fog or spray.

None known

No specific fire or explosion hazard.

Decomposition materials may include the following materials:carbon dioxidecarbon monoxide

No special measures are required.

Firefighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures For non-emergency personnel For emergency responders

Environmental precautions

: :

:

No action shall be taken involving any personal risk or without suitable training. Put on appropriate personal protective equipment.If specialized clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials. See also the information in “For non-emergency personnel.”None required if used according to recommended conditions.





Eye contact Inhalation

Skin contact Ingestion

::

::

No known significant effects or critical hazards.Exposure to decomposition products may cause a health hazard. Serious effects may be delayed following exposureNo known significant effects or critical hazards.No known significant effects or critical hazards.

Most important symptoms/effects, acute and delayed Potential acute health effects

Eye contact Inhalation Skin contact Ingestion

::::

No known significant effects or critical hazards.No known significant effects or critical hazards.No known significant effects or critical hazards.No known significant effects or critical hazards.

Over-exposure signs/symptoms


of 10

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

::

::

Vapor pressure Vapor density Relative density Solubility

::::

Not available.Not available.Not available.Soluble in the following material: cold water and hot water.

Appearance Physical state Color Odor Odor threshold pH Melting point Boiling point Flash point Burning time Burning rate Evaporation rate Flammability (solid, gas) Lower and upper explosive (flammable) limits

:::::::::::::

Liquid.Orange.Not available.Not available.Not available.Not available.Not available.Not available.Not available.Not available.Not available.Not available.Not available.

Solubility in water Partition coeffecient n-octonal / water Auto-ignition temperature Decomposition temperature

Not available.Not available.


SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Control parameters Occupational exposure limits None.Appropriate engineeringcontrolsEnvironmental exposurecontrols

: :

Good general ventilation should be sufficient to control worker exposure to airbornecontaminants.Emissions from ventilation or work process equipment should be checked to ensurethey comply with the requirements of environmental protection legislation.

Skin protectionHand protection

Body protectionOther skin protectionRespiratory protection

:

:::

Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.Not required under normal conditions of use.Not required under normal conditions of use.Not required under normal conditions of use.

Individual protection measures Hygiene measures

Eye/face protection

:

:

Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the work period.Not required under normal conditions of use.

SECTION 7. HANDLING AND STORAGE

Protective measures Advice on general Occupational hygiene

Conditions for safe storage, including any incompatibilities

::

Put on appropriate personal protective equipment (see Section 8).Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and faces before eating, drinking and smoking. See also Section 8 for additional information on hygiene measures.

Store in accordance with local regulations. Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Do not store in unlabeled containers.

Precautions for safe handling

Methods and materials for contaminant and cleaning up Spill : Move containers from spill area. Prevent entry into sewers, water courses, basements or

confined areas. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Note: see Section 1 for emergency contact information and Section 13 for waste disposal.


of 10

Not available.Not available.Not available.Soluble in the following material: cold water and hot water.

Liquid.Orange.Not available.Not available.Not available.Not available.Not available.Not available.Not available.Not available.Not available.Not available.Not available.



SADT Viscosity

::


ReactivityChemical stabilityPossibility of hazardousreactionsConditions to avoidIncompatible materials

Hazardous decomposition products

:::

::

:

No specific test data related to reactivity available for this product or its ingredients.The product is stable.Under normal conditions of storage and use, hazardous reactions will not occur.

No specific data.Reactive or incompatible with the following materials: oxidizing materials. Non-reactiveor compatible with the following materials: reducing materials, combustible materials, organic materials, metals, acids, alkalis, and moisture.Under normal conditions of storage and use, hazardous decomposition products should not be produced.

SECTION 10. STABILITY AND REACTIVITY

SECTION 11. TOXICOLOGICAL INFORMATION

Sensitization

Information on toxicological effects Acute toxicity

Product/ingredient name Result Species Dose Exposure

Product/ingredient name Result Species Score Exposure Observation

Irritation/Corrosion

Mutagenicity There is no data availableCarcinogenicity There is no data availableReproductive toxicity There is no data availableTeratogenicity There is no data availableSpecific target organ toxicity (single exposure) There is no data availableSpecific target organ toxicity (repeated exposure) There is no data availableAspiration hazard There is no data available

Skin Respiratory

::

There is no data availableThere is no data available

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES (CONTINUED)


of 10

SECTION 11. TOXICOLOGICAL INFORMATION (CONTINUED)

Information on the likely routes of exposure

: Routes of entry anticipated: Oral, Dermal

Potential acute health effects Eye contact Inhalation

Skin contact Ingestion

::

::

No known significant effects or critical hazards.Exposure to decomposition products may cause a health hazard. Serious effects may be delayed following exposure.No known significant effects or critical hazards.No known significant effects or critical hazards.

Symptoms related to the physical, chemical and toxicological characteristics

Delayed and immediate effects and also chronic effects from short and long term exposure

Eye contact Inhalation Skin contact Ingestion

::::

No known significant effects or critical hazards.No known significant effects or critical hazards.No known significant effects or critical hazards.No known significant effects or critical hazards.

Potential immediate effects Potential delayed effects

:

:

No known significant effects or critical hazards.


Short term exposure

Potential immediate effects Potential delayed effects

:

:



Long term exposure

General Carcinogenicity Mutagenicity Teratogenicity Developmental effects Fertility effects

::::::

No known significant effects or critical hazards.No known significant effects or critical hazards.No known significant effects or critical hazards.No known significant effects or critical hazards.No known significant effects or critical hazards.No known significant effects or critical hazards.

Potential chronic health effects

Numerical measures of toxicity Acute toxicity estimates

Route ATE value

SECTION 12. ECOLOGICAL INFORMATION

Toxicity

Persistence and degradability There is no data available

Product/ingredient name Result Species Exposure


of 10

SECTION 13. DISPOSAL CONSIDERATIONS

SECTION 12. ECOLOGICAL INFORMATION (CONTINUED)

Bioaccumulative potential

Product/ingredient name LogPOW BCF Potential

Mobility in soil Soil/water partition coefficient (KOC) Other adverse effects

:

:

There is no data available


Disposal methods : The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Empty containers or liners may retain some product residues. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.

SECTION 14. TRANSPORT INFORMATION

IMDG IATA

UN number Not regulated Not regulated Not regulated

UN proper shipping name - - -

Transport hazard class(es) - - -

Packing group - - -

Environmental hazards No. No. No.

Additional information - - -

Special precautions for user

: Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code

: Not available


of 10

SECTION 15. REGULATORY INFORMATION

U.S. Federal regulations

Clean Air Act Section 112 (b) Hazardous Air Pollutants (HAPs) Clean Air Act Section 602 Class I Substances Clean Air Act Section 602 Class II Substances DEA List I Chemicals (Precursor Chemicals) DEA List II Chemicals (Essential Chemicals)

:

:

:

:

:

:

TSCA 8(a) CDR Exempt/Partial exemption: Not determined United States inventory (TSCA 8b): All components are listed or exempt.Listed

Not listed

Not listed

Not listed

Not listed

SARA 302/304 Composition/information on ingredients No products were found SARA 304 RQ : Not applicableSARA 311/312 Classification : Not applicable

Composition/information on ingredients

Name % Fire hazard Sudden release of pressure

Reactive Immediate (acute) health hazard

Delayed (chronic) health hazard

Crystalline silica, quartz 5-10 No. No. No. No. Yes.Pyrophyllite 5-10 No. No. No. Yes. No.P-[(Diiodomethyl)sulphonyl]toluene 0-0.01 No. No. No. Yes. No.

SARA 313

Product name CAS number %Form R - ReportingRequirements

SARA 313 notifications must not be detached from the MSDS and any copying and redistribution of the MSDS shall include copying and redistribution of the notice attached to copies of the MSDS subsequently redistributed.

Massachusetts New York New Jersey Pennsylvania

::::

None of the components are listedNone of the components are listedNone of the components are listedNone of the components are listed

State regulations

California Prop. 65

Ingredient name Cancer Reproductive Maximum accept-able dosage level


of 10

SECTION 15. REGULATORY INFORMATION (CONTINUED)

International lists

Chemical Weapons Convention List Schedule I Chemicals Chemical Weapons Convention List Schedule II Chemicals Chemical Weapons Convention List Schedule III Chemicals

:

:

:

:

Australia inventory (AICS): All components are listed or exempted.China inventory (IECSC): All components are listed or exempted.Japan inventory: All components are listed or exempted.Korea inventory: All components are listed or exempted.Malaysia Inventory (EHS Register): Not determined.New Zealand Inventory of Chemicals (NZIoC): All components are listed or exemptedPhilippines inventory (PICCS): All components are listed or exempted.Taiwan inventory (CSNN): Not determined.Not listed

Not listed

Not listed

International regulations

Date of issue mm/dd/yyyy Version Revised Sections Prepared by Key to abbreviations

:::::

28/04/20161Not applicableCorkjoint (Malaysia) Sdn. Bhd.ATE = Acute Toxicity EstimateBCF = Bioconcentration FactorGHS = Globally Harmonized System of Classification and Labelling of ChemicalsIATA = International Air Transport AssociationIBC = Intermediate Bulk ContainerIMDG = International Maritime Dangerous GoodsLogPow = logarithm of the octanol/water partition coefficientMARPOL 73/78 = International Convention for the Prevention of Pollution From Ships1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)UN = United Nations

History

SECTION 16. OTHER INFORMATION


of 10


© Corkjoint 2016. All Rights Reserved.


10, Admiralty Street, #03-82 North Link Building

Singapore 757695.

Tel +65 6455 9331

Fax +65 6455 8535

Effective Date: 28th April 2016


No.51, Jalan BRP 8/2, Bukit Rahman Putra Industrial Park

47000 Sungai Buloh, Selangor Darul Ehsan, Malaysia.

Tel +603 6148 8010

Fax +603 6148 8020

CJ-200 Water-Based Adhesive Primer MSDScorkjoint.com/wp-content/uploads/2018/02/CJ-200... ·...

Documents

Transcript of CJ-200 Water-Based Adhesive Primer MSDScorkjoint.com/wp-content/uploads/2018/02/CJ-200... ·...