CITILED & OPTICAL...
Transcript of CITILED & OPTICAL...
製品カタログProduct Catalogue
CITILED &OPTICAL SENSOR小型チップLED、高感度光センサーCompact Chip LED &High-sensitivity Optical SensorCoompmpmpacacactt ChC ipip LLEDEDED &&&HiH ghgh-s-ssenenensisis titiviv yy OOptptpticicicalala SSennsosoorrr
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
Technical
note
CITILE
DHigh brightnesswhite LED
Technical
note
OPICAL
SENSOR
Chip photo-
transisto
r
1
Our advanced devices support downsizing, thinning and high performance of application products.
腕時計の開発で培った独自の精密加工技術が進化を重ね、付加価
値の高い電子デバイスへと、確実に受け継がれてきました。高度
なアプリケーションニーズに応える、多彩なラインナップでお届
けします。
High value added electronic devices have succeeded, based on the progress of our unique precision machining technologies cultivated in developing wrist watches. We offer a wide lineup of products to satisfy highly advanced applications.
全製品ともSMD(表面実装)が可能。実装をオートメーション化することで、コストダウンに大きく貢献します。小型、高品質、高性能なラインナップにより、多様なニーズに対応しています。
All products are applicable for the SMD (Surface Mount Device) type. Automated mounting contributes significantly to cost reduction. Our compact, high-quality and high-performance lineup supports various needs.
マルチカラーLED Multi-color LED
単一パッケージ内にR、G、Bの3素子を搭載。インジケータ(状態表示)、イルミネーション、ロゴ照明など、さまざまな用途に使用可能です。
Three elements, R, G and B, are mounted in a single package. This product is for applications such as indicators, illumina-tion and logo illumination.
通信デバイスなどのLCDバックライト光源に適した高輝度、薄型パッケージの製品です。導光板と組み合わせてご利用いただけます。
Has high-brightness and thin packages that are suited for the light source of LCD backlights used in communication devices. This product can be used with a light guide.
高輝度白色LED High Brightness White LED
一般色LED(単色タイプ) General Color LED(Mono-color Type)
非常に小型で、しかも製品サイズ・ラインナップが充実。上面発光タイプ、側面発光タイプの中から、用途に合わせて選べます。
Has remarkable compactness and is available in many sizes. Select upward- and side-lighting depending on your application.
スマートフォン、携帯電話に内蔵され、暗所での撮影時に被写体を照射します。パルス点灯、常時点灯とも駆動できます。
Equipped in smart phones and cel l phones to illuminate the subject when shooting in the dark. Both pulse lighting and full-time lighting can be selected.
フラッシュ光源用LEDFlash LED
小型チップ LEDCompact Chip LED
CL-340 CL-505S CL-503 CL-482T CL-A100
CL-194 CL-260 CL-770S CL-597S CL-690
シチズン電子の先進デバイスが、機器の小型化、薄型化、高性能化を支えます。
Introduction
シチズン電子・デバイス応用製品
Citizen Electronics device application products
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
Technical
note
CITILE
DHigh brightnesswhite LED
Technical
note
OPICAL
SENSOR
Chip photo-
transisto
r
2
赤外光の発光素子(赤外LED)、受光素子(フォトトランジスタ、フォトダイオード)を用いた高感度センサー。カメラのレンズ位置検出、デバイス間の通信、ウエアラブル機器での生体測定、生体認証など、幅広い用途で活躍します。
High-sensitivity optical sensor uses an infrared light emitting element (infrared LED) and a light receiving element (phototransistor, photodiode). This product is used in a wide variety of applications such as detecting the camera lens position, communicating between devices, and somatometry and biometric authentication with wearable devices.
高度な光学設計技術、精密金型技術、射出成形技術が融合。シチズン電子のLEDを活かしたバックライトユニットを中心に提供しています。The optical design, precision die and injection molding technology have been sophisticatedly combined. We primarily provide backlight units that utilize our LED.
赤外チップLED Infrared Chip LED
赤外光を発光するダイオードを搭載。光通信の送信部分としてご利用いただけます。
An inf rared l ight emi t t ing d iode is equipped. This product can be used as a transmission part in optical communica-tion.
液晶バックライトユニットLCD Backlight Unit
フォトリフレクタPhoto-Reflector
赤外光の発光素子と受光素を単一パッケージ内に搭載。反射光の検出により、位置検出やバイオメトリにお使いいただけます。
Both an infrared light emitting element and a light receiv ing element are equipped in a single package. This product can be used for position detection and biometry by detecting reflected light.
自動車のキーレスエントリーや、DVDプレーヤーのディスク位置検出などに幅広く使われます。
Can be used in a wide variety of applica-tions such as vehicle keyless entry and disk position detection of DVD players.
チップフォトトランジスタChip Photo-transistor
アッセンブリ製品Assembly Products
Ultra-thin, round, and compact type
高感度光センサーHigh-sensitivity Optical Sensor
Introduction 光の基礎知識 Basic Knowledge of Light
CITILED 小型チップLEDCompact Chip LED
Technical note マルチカラーLED Multi-color LED
・CL-505S Series(7)
・CL-505S Series RGW(8)
・CL-503 Series(9) ・CL-341 Series(10)
・CL-340 Series(11) ・CL-165 Series(11)
・CL-426 Series(12) ・CL-425 Series(13)
・CL-Z891 Series(14) ・CL-421 Series(15)
・CL-385 Series(15) ・CL-375 Series(16)
高輝度白色LED High Brightness White LED
・CL-287S Series(16) ・CL-198N Series(17)
・CL-194S Series(17) ・CL-Z194S Series(18)
・CL-600S Series(18) ・CL-260S Series(19)
・CL-282S Series(19) ・CL-830S Series(20)
・CL-482T Series(20) ・CL-Z482T Series(21)
・CL-483S Series(21) ・CL-840S Series(22)
・CL-270S Series(22) ・CL-435F2 Series(23)
・CL-432F2 Series(23) ・CL-963 Series(24)
・CL-A120 Series(24) ・CL-A100 Series(25)
・CL-A130 Series(25) ・CL-A131 Series(26)
一般色LED(単色タイプ) General Color LED (Mono-color Type)
・CL-198T Series(26) ・CL-198N Series(27)
・CL-197 Series(28) ・CL-194S Series(29)
・CL-670S Series(29) ・CL-196 Series(30)
・CL-195 Series(31) ・CL-170 Series(32)
・CL-260 Series(33) ・CL-270 Series(34)
・CL-482S Series(35)
フラシュ光源用LED Flash LED
・CL-773F Series(36) ・CL-776A3 Series(37)
・CL-770S Series(38) ・CL-774S Series(38)
・CL-690S Series(39) ・CL-597S Series(40)
OPTICAL SENSOR 高感度光センサーHigh-sensibility Optical Sensor
Technical note 赤外チップLED Infrared Chip LED
・CL-170IR-X Series(43)
チップフォトトランジスタ Chip Photo-transistor
・CPT-230 Series(44) ・CPT-290 Series(44)
フォトリフレクタ Photo-Reflector
・PR-30 Series(45) ・PR-40 Series(45)
ASSEMBLIES アッセンブリ製品Assembly Products
・液晶バックライトユニット(46) LCD Backlight Unit
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・1・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・3
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・5
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・5・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・7
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・16
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・26
・・・・・・・・・・・・・・・・・・・・・・・・・・36
・・・・・・・・・・・・・・・41
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・41・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・43
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・44
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・45
・・・・・・・・・・・・・・・・・・・・・・・46
Contents
CL-170IR-X CPT-230 CPT-290
PR-30 PR-40
超薄型・円形小型On-vehicle type (7 in.)
On-vehicle type (12 in.)
車載用(7インチ)車載用(7インチ)Ultra thin, round, and compact type
O
On車載用(12インチ)
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
3
Basic Knowledge of Light
Light and three primary colors
表示や照明の光源として、さまざまな機器や装置への応用が進む
LED。その光と色には、基本となる性質や、いろいろな基準、条件
等があります。ここでは、LED製品を選ぶ際に役立つ、それらのポ
イントを紹介します。
LEDs in apparatuses and devices are used as a light source for indication and illumination. The light and color are explained with various standards, conditions and more. This section introduces useful tips for selecting LED products.
私たちの目に見える光は、波長380nm~780nmの電磁波であり、「可視光線」と呼ばれます。可視光線は通常は白っぽい無色に見えますが、例えば太陽の光をプリズムを通して見ると、虹のような無数の色の帯(スペクトル)が現れます。このことは、「無数の色が集まって、白っぽい無色の光をつくっている」ということを意味します。無数にある色のうち、赤(R)、緑(G)、青(B)の3色を「光の3原色」といいます。このRGBの比率を調節して混ぜ合わせると、ほぼすべての色の光をつくることができるからです。
The light we see is electromagnetic waves with wavelengths from 380 nm to 780 nm, which is called visible light.This light normally looks whitish but decomposes into myriad color bands like a rainbow when sunlight is seen through a prism. This phenomenon indicates that myriad colors come together and constitute a whitish colorless light.Among the myriad colors, red (R), green (G) and blue (B) are called the primary colors of light. Almost all light colors can be created by adjusting the mixture ratio of R, G and B.
光の基礎知識
光と3原色
Quantification of light color (color temperature)
物体(黒体)は温度が上がると光を放ちますが、その色は温度の上昇に伴い赤→黄→白→青→白へと変化していきます。この色の変化と温度との関係を利用して、光の色を温度で表したのが色温度です。その単位には「絶対温度」K(ケルビン)が用いられます。人が光の色を主観で表すと、同じ色でも人によって微妙な違いが生じますが、色温度という基準を用いることで、個々の色を物理的・客観的に表すことができる利点があります。
When the temperature of a black body increases, it emits light and the color changes, red → yellow → white → blue → white, with the temperature rise. The color temperature is defined as the light color indicated with temperature by utilizing the relationship between the color change and temperature mentioned above. The absolute temperature K (Kelvin) is used for the color temperature unit. When people subjectively express the color of light, subtle differences exist depending on the person, even if it is the same color. When the standard called color temperature is used, each color can be physically and objectively expressed, which is an advantage.
光の色の数値化(色温度)
■光の三原色 Primary light colors
R
B G
Y M
C
W
波長Wavelength
長いLong
短いShort
0.0004nm 0.001nm 10nm 20nm 200nm 380nm 780nm 0.002mm 0.22mm 1mm 100Km
宇宙線
Cosmic rays ガ
ンマ線 G
amma ray X
線 X-ray 遠
紫外線
Far-ultraviolet
radiation 近
紫外線
Near-ultraviolet
radiation 可
視光線 V
isible light 近
赤外線
Near infrared
rays 遠
赤外線
Far infrared rays ラ
ジオ電波
Radio wave (
音) S
ound
380nm 400nm 500nm 600nm 700nm 780nm
■電磁波の波長と、可視光線のスペクトル Wavelength of electromagnetic waves and visible light spectrum
紫Violet
藍Indigo
青Blue
緑Green
黄Yellow
橙Orange
赤Red
R+G=Y
G+B=C
B+R=M
R+G+B=W
■色度図と色温度 Chromaticity diagram and color temperature
00
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
115,000K
1,000K
10,000K
1,500K
2,000K
3,000K
4,000K
6,000K
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Technical
note
Technical
note
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
4
Introduction
Color rendering index
光源が変わると、同じ色が違って見えたりします。このように光源が色の見え方に及ぼす性質を演色性といいます。色の見え方が自然光(太陽光)で見た場合に近いほど、その光源は演色性が良いといいます。演色性の度合いは、日本ではCIE(国際照明委員会)の評価法に基づいてJISが判定します。具体的には、15種類の試験色をそれぞれ基準光源と試料光源で照らし、その見え方の差を「特殊演色評価数(R1)、(R2)、…(R8)」として表します(例えば、1番目の試験色が基準光源と同じ見え方であれば「R1=100」となります)。こうして得たR1~R8の数値を平均したものが「平均演色評価数(Ra)」であり、これが80(Ra80)以上であれば、一般に演色性が良いといえます。光源によって演色性が異なるのは、その中に含まれる光の波長が異なるからです。このことは、光源の分光分布*を比べるとわかります。たとえば、自然光(太陽光)には、波長の異なる光が可視光領域内(380nm~780nm)にほぼ均一に含まれていますが、白色蛍光灯では含まれる光の波長の分布状態にかなりバラツキがあります。この分光分布が自然光に近い光源ほど、色の見え方が自然光に近く、演色性が良いというわけです。
If light sources are different, the same color may look different; where a light source affects the color appearance is called color rendering. When the color appearance is closer to the color under natural light (sunlight), the light source is better at color rendering.In Japan, the color rendering level is determined by JIS in accordance with the CIE (International Commission on Illumination) evaluation method. Specifically, 15 test colors are lit by the reference light source and sample light source respectively. The differences in the appearance of the colors are expressed with special color rendering indices, (R1), (R2), ... and (R8). If the appearance of the 1st test color is the same as that of the reference light source, it is concluded as "R1 = 100." The averaged value obtained from R1 to R8 as above is the average color rendering index (Ra); if this index value is 80 (Ra 80) or more, the color rendering is good in general.Color rendering differs depending on the light source because light wavelengths differ from each other, which can be understood by comparing spectral distributions* of light sources. For example, natural light (sunlight) includes lights with different wavelengths within the visible light region (380 nm to 780 nm) in a nearly uniform fashion, but the distribution of light wavelengths included in a white fluorescent light is uneven. The closer that a light source is to the spectral distribution of natural light, the closer the color appearance is to the appearance of natural light and the better the color rendering.
色の見え方(演色性)
Color mixing property of white LED
白色LEDの白色光のつくり方には、いくつかの方式があります。一つは、赤色、緑色、青色のLEDを組み合わせる方式です。ただ、この方式は、演色性は良いもののコストと発光効率の面で課題があります。そのため、高い発光効率が比較的手軽に得られる、青色LEDと黄色蛍光体を組み合わせる方式が多く用いられています。しかし、これだと発光色が擬似白色となり、高い演色性を得られない難点があります。このほか、近紫外線LEDと青色、赤色、緑色蛍光体を組み合わせる方式もありますが、これは明るさの面で課題があるとされています。シチズン電子では、青色LEDで赤色蛍光体と緑色蛍光体を光らせる方式を採用しています。この方式ならコストと効率面の課題を解決できるばかりか、赤(R)、緑(G)、青(B)のバラツキの少ない、きれいな白色光による高い演色性を得ることができます。
Different methods can create the white light of a white LED. One is combining red, green and blue LEDs, which is good for color rendering but still problematic for the cost and luminous efficiency. Therefore, combining a blue LED with a yellow phosphor is often used, which has high luminous efficiency and can be readily obtained. The luminescent color obtained with this method, however, is pseudo-white and has difficulty obtaining high color rendering. Other methods can combine a near-ultraviolet LED with a blue, red or green phosphor, but these methods have problems with brightness.Citizen Electronics uses a blue LED to make a red phosphor and a blue phosphor emit light. This solves the problems of cost and efficiency while also obtaining high color rendering with less unevenness among R, G, and B providing a clean white light.
白色LEDにおける混色性
* 光源に含まれる光を波長ごとに分割し、それぞれの光エネルギー量を分布図で表したもの
■分光分布 Spectral distribution
0
20
400 500 600 700
40
80
100
60
(%)
(nm)
光の強さ
0
20
40
80
100
60
(%)
光の強さ
波長400 500 600 700 (nm)
自然光(昼光) Natural light (Sunlight)
白色蛍光灯 Fluorescent light
Light intensity
Light intensity
Wavelength 波長 Wavelength
■白色LEDのつくり方 How to produce white LEDs
①青色LED+緑色LED+赤色LED ②青色LED+黄色蛍光体
③青色LED+赤色・緑色蛍光体 ④近紫外LED+赤色・緑色・青色蛍光体
Blue LEDs + Red LEDs + Green LEDs Blue LEDs + Yellow phosphors
Blue LEDs + Red phosphors + Green phosphors Near-ultraviolet LEDs + Red phosphors +Green phosphors + Blue phosphors
0
20
400380 500 600 700 780
40
80
100
60
(%)
(nm)
光の強さ
Light intensity
波長 Wavelength
■白色LEDの分光分布 Spectral distribution of white LEDs
0
20
400380 500 600 700 780
40
80
100
60
(%)
(nm)
一般の白色LED(青色LED+黄色蛍光体)General white LEDs (Blue LEDs + Yellow phosphors)
高演色白色LED(青色LED+赤色・緑色蛍光体)High CRI white LEDs (Blue LEDs + Red phosphors + Green phosphors)
B
B
GR
Y光の強さ
Light intensity
波長 Wavelength
Technical
note
Technical
note
* Spectral distribution is a distribution chart, which is made by dividing light included in a light source by wavelength and indicating the energy amount of the light in each wavelength.
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
5
Compact Chip LED小型チップ LED
Features
1.全製品ともSMD(表面実装デバイス)タイプ。高い装着率が得られる チップマウンターによる自動マウントが可能
2.標準型から極小型、超小型まで、サイズを幅広くラインナップ。高密度実 装が可能3.輝度は、全製品について標準タイプ、高輝度タイプ、超高輝度タイプをご用意4.リフローはんだ付けが可能5.鉛フリー、RoHS指令に対応6.バルク納品やテーピング納品をはじめ、基板にアッセンブリしたユニットでの納品にも対応
1.
2.
3.
4.5.6.
All products are SMD (Surface Mount Device). Auto-mount is enabled by a chip mounter which provides a high attachment rate.A wide variety of selections from standard to minimal and ultra-compact are available. High density mounting is achieved.Standard brightness, high brightness and ultra-high brightness are available for all products.Reflow soldering is available.Lead free, compliant with RoHS directiveBulk, taped and even delivery of a unit assembled on a substrate are supported.
The products are delivered taped. Taping specifications differ depending on the product. (For more information, please ask for the specification sheets.)
特徴
Product Nomenclature製品コードの見方
Technical note
Delivery納入形態
製品はテーピングして納入します。テーピング仕様は製品によって異なります(詳細は、個別仕様書をご請求の上、確認してください)。
(例)フラッシュ光源用LED “CITILIGHT” (E.g.) Flash LED “CITILIGHT”
CL-690S-2 WN-C D-T CITILED共通番号CITILED common number
シリーズ名Series
素子数Quantity of elements
2:2個 2 pieces
WN:超高輝度白色 Ultra-high brightness white
C:着色(標準品) Coloration (standard product)
D:散乱剤入り(標準品) Dispersing agent included (standard product)
T:テーピング Taping
発光色Lighting color
樹脂色Resin color
散乱Scattering
納入形態Delivery style
Note: "Series" and "Luminescent color" may have different number of digits.
(注) 「シリーズ名」「発光色」は、桁数が異なることがあります。
Technical
note
Technical
note
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
6
Design cautions
1.回路内には必ず電源制限抵抗を接続し、定格内で駆動するよう設計してください。2.パルス駆動で使用する場合は、平均電流値が定格内になるよう設計してください。また、LED消灯時に逆電圧がかからないようにしてください。3.LEDを複数個使用する場合は、それぞれのLED間に電流差が生じないよう、LEDに流れる電流の経路ごとに電流制限抵抗を設けてください。
設計上の注意
Recommended solderingはんだ付け推奨条件
140-160̊C
240̊C max.
10 sec. max.
4̊C/sec.max.
4̊C/sec.max.
1分以上
時間
温度
Time 時間 Time
Temperature
温度Temperature
Over 1 min.
160-180̊C260̊C max.
220̊C
4̊C/sec.max.
4̊C/sec.max.
140秒 60~70秒140 Sec. 60~70 Sec.
[例3 Example3][例2 Example2][例1 Example1]
Moisture-proof packaging uses an aluminum bag including a desiccant (silica gel) to protect the product from moisture during shipment and storage. Be aware that the silica gel changing from green to pink is due to moisture absorption.
梱包仕様 Packing
輸送中および保管中に製品を湿気から守るため、中に乾燥剤(シリカゲル)を入れたアルミパックで防湿包装を行っています。シリカゲルがグリーンからピンクに変色すると、吸湿が進んだしるしなのでご注意ください。
実装時のリフローはんだ付け温度プロファイルは、下図を参照してください。個別製品の対応については、当社へ事前にご相談いただくことをお奨めします。
For details of other than the above, please inquire for each specification sheet.
*上記以外の詳細については、個別仕様書をご請求の上、確認してください。
乾燥剤 Desiccant
リール Reel
ポリチャック Polyester zip fastener
アルミパック Envelopeラベル Label
[防湿梱包]Moisture-proof packaging
Recommendable "profile for reflow soldering"
Keep the temperature of the soldering iron tip at 350°C or less and solder within 3 seconds for each round.
Refer to the following diagram for the temperature profile for reflow soldering at mounting. We recommend consulting us in advance for individual products.
[リフローはんだ]
[手はんだ]
Reflow soldering
Manual soldering
コテ先温度を350℃以下に抑えて、各ラウンド3秒以内で行ってください。
推奨「リフローはんだ付けプロファイル」
Design example設計例
Recommendable "profile for lead-free reflow soldering"
推奨「鉛フリーリフローはんだ付けプロファイル」
Technical
note
Technical
note
1.
2.
3.
Design the system to drive it within the rating by connecting a power supply limiting resistance.Design the system to set the average current value within the rating when using the system by pulse drive. Prevent a reverse voltage from being applied when LEDs are inactive.When multiple LEDs are used, mount a current limiting resistance in each current path flowing to an LED to eliminate current difference among the LEDs.
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
* NIST規格に準拠 * Compliant with NIST standards
Series Color variation
Red
Green
Blue
CL-505S 125
78
76
72
30
20
20
4
P*1
(mW)
-25~+80 -30~+85
Pd(mW)
IF(mA)
IFP(mA)
VR(V)
Top(℃)
Tst(℃)
VF
IR
IV
λd
IF=5mA
VR=4V
IF=5mA
IF=5mA
Parameter Symbol MIN TYP MAX UnitConditions
順電圧Forward Voltage
逆電流Reverse Current
光度Luminous Intensity*
ドミナント波長Dominant Wavelength
Color variation
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
1.36
2.33
2.33
23
91
36
601
516
461
1.85
2.70
2.75
40
220
65
618
530
470
2.47
3.19
3.19
100
2
2
629
540
479
V
μA
mcd
nm
単位 Unit : mm
特徴 Features
●絶対最大定格 Absolute Maximum Rating
●電気的光学的特性 Electrical and Optical Characteristics
●外形寸法図 Outline drawing
(Ta 25℃)
(Ta 25℃)
*1 Pは同時点灯時の全許容損失を示します。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 P means total value of power dissipation when both colors are on./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
100*2
7
LED素子(B)LED die(B)
LED素子(G)LED die(G)
LED素子(R)LED die(R)
1
(0.225) (0.225)
(1) (4)
(2) (3)
1
(0.163)
(0.163)
(0.225)
(0.225) 0.090.26
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
0.45
0.45
0.4
0.45 0.4 0.45
(1)(2)(3)(B)(R)(G)
(4)
1.0(L)× 1.0(W)×0.26(H)mm
同一パッケージで3色発光3 co lo r s em i t t i ng f rom a s ing le package
1. 上面発光、超小型・薄型Upward-lighting, ultra-compact/thin type
2.
CL-505S SeriesマルチカラーLED Multi-color LED
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
Technical
note
Technical
note
(3) (2)
0.35
0.150.1
0.35
0.35
0.15
0.35(4) (1)
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
8
Series Color variation
RedGreenWhite
CL-505S-RGW 125787672
302020
4
P*1
(mW)
-25~+80 -30~+85
Pd(mW)
IF(mA)
IFP(mA)
VR(V)
Top(℃)
Tst(℃)
VF
IR
IV
λd
x, y
IF=5mA
VR=4V
IF=5mA
IF=5mA
IF=5mA
Parameter Symbol MIN TYP MAX UnitConditions
順電圧Forward Voltage
逆電流Reverse Current
光度Luminous Intensity*1
ドミナント波長Dominant Wavelength
Color variationRedGreenWhiteRedGreenWhiteRedGreenWhiteRedGreenWhite
1.362.332.33
239182601516
1.852.72.75
40220220618530
2.473.193.1910022110468396629539
V
μA
mcd
nm
単位 Unit : mm
特徴 Features
●絶対最大定格 Absolute Maximum Rating
●電気的光学的特性 Electrical and Optical Characteristics
●外形寸法図 Outline drawing
(Ta 25℃)
(Ta 25℃)
*1 Pは同時点灯時の全許容損失を示します。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 P means total value of power dissipation when both colors are on./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
100*2
LED素子(W)LED die(W)
LED素子(G)LED die(G)
LED素子(R)LED die(R)
1
(0.225) (0.225)
(1) (4)
(2) (3)
1
(0.163)
(0.163)
(0.225)
(0.225) 0.090.26
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
0.45
0.45
0.4
0.45 0.4 0.45
1.0(L)× 1.0(W)×0.26(H)mm
同一パッケージで3色発光3 co l o r s em i t t i n g f r om a s i n g l e package
1. 上面発光、超小型・薄型Upward-lighting, ultra-compact/thin type
2.
CL-505S Series RGWマルチカラーLED Multi-color LED
Technical
note
Technical
note
*1 NIST規格に準拠/*2 色度座標は、a、b、c、dに囲まれた範囲です。 *1 Compliant with NIST standards/*2 Chromaticity coordinates are surrounded by points a, b, c, and d.
色度座標 Chromaticity coordinates*2
x(±0.02)0.2050.2050.2850.285
y(±0.02)0.1180.2160.3300.232
abcd
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
極性Polarity
(1)(2)(3)(W)(R)(G)
(4)
(3) (2)
0.35
0.150.1
0.35
0.35
0.15
0.35(4) (1)
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
9
Technical
note
Technical
note
CL-503 SeriesマルチカラーLED Multi-color LED
特徴 Features
同一パッケージで3色発光3 co lo r s em i t t i ng f rom a s ing le package
1. 上面発光、超小型・薄型Upward-lighting, ultra-compact/thin type
2.
1.5(L)× 1.3(W)×0.35(H)mm
* NIST規格に準拠 * Compliant with NIST standards
Product codeColorvariation
Red
Green
Blue
CL-503S-TCC 125
78
80
73
30
20
20
4
P*1
(mW)
-25~+80 -30~+85
Pd(mW)
IF(mA)
IFP(mA)
VR(V)
Top(℃)
Tst(℃)
VF
IR
IV
λd
IF=5mA
VR=4V
IF=5mA
IF=5mA
Parameter Symbol MIN TYP MAX UnitConditions
順電圧Forward Voltage
逆電流Reverse Current
光度Luminous Intensity*
ドミナント波長Dominant Wavelength
Color variation
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
17
82
18
1.85
2.70
2.75
33
220
65
618
530
470
2.47
3.19
3.19
100
2
2
V
μA
mcd
nm
VF
IR
IV
λd
IF=5mA
VR=4V
IF=5mA
IF=5mA
Parameter Symbol MIN TYP MAX UnitConditions
順電圧Forward Voltage
逆電流Reverse Current
光度Luminous Intensity*
ドミナント波長Dominant Wavelength
Color variation
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
1.36
2.33
2.33
16
55
11
603
518
461
1.85
2.70
2.75
36
180
40
618
530
470
2.47
3.19
3.19
100
2
2
79
330
88
642
542
477
V
μA
mcd
nm
●絶対最大定格 Absolute Maximum Rating
●電気的光学的特性 Electrical and Optical Characteristics
●外形寸法図 Outline drawing
(Ta 25℃)
*1 Pは同時点灯時の全許容損失を示します。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 P means total value of power dissipation when both colors are on./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
100*2
Product codeColorvariation
Red
Green
Blue
CL-503T 125
78
76
72
30
20
20
4
P*1
(mW)
-25~+80 -30~+85
Pd(mW)
IF(mA)
IFP(mA)
VR(V)
Top(℃)
Tst(℃)
100*2
(Ta 25℃)
CL-503S-TCC CL-503T
(Ta 25℃) (Ta 25℃)[CL-503S-TCC] [CL-503T]
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
単位 Unit : mm単位 Unit : mm
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
①
②
④ ③RGB
0.85
0.226
0.7
∠90°
0.35
0.226
LED素子(B)LED die(B)
LED素子(G) LED die(G)
LED素子(R)LED die(R)
樹脂Resin
基板PCB
①
④
③
1.3
(0.83)
(0.65)
(0.12)
0.35
(0.53)
(0.92)
1.5
②(0.47)
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
①②③
④
BRG
0.85
0.226
0.7
∠90°
0.35
0.226
LED素子(B)LED die(B)
LED素子(G) LED die(G)
LED素子(R)LED die(R)
樹脂Resin
基板PCB
①
④
③
1.3
(0.83)
(0.65)
(0.12)
0.35
(0.53)
(0.92)
1.5
②(0.47)
はんだ付け電極Soldering terminal
アノードマークAnode mark
0.65
4-R0.15
0.360.58
0.580.46
0.75
はんだ付け電極Soldering terminal
カソードマークCathode mark
0.65
4-R0.15
0.360.58
0.580.46
0.75
極性Polarity
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
10
Technical
note
Technical
note
* NIST規格に準拠 * Compliant with NIST standards
Series Color variation
Red
Green
Blue
CL-341
52
74
74
20
20
20
4 -25~+85 -30~+100
Pd(mW)
IF(mA)
IFP(mA)
VR(V)
Top(℃)
Tst(℃)
VF
IR
IV
λd
IF=20mA
VR=4V
IF=20mA
IF=20mA
Parameter Symbol MIN TYP MAX UnitConditions
順電圧Forward Voltage
逆電流Reverse Current
光度Luminous Intensity*
ドミナント波長Dominant Wavelength
Color variation
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
1.75
2.72
2.76
619
520
455
820
2140
325
624
528
460
2.68
3.81
3.81
(10)
(10)
(10)
629
535
465
V
μA
mcd
nm
CL-341 Series
単位 Unit : mm
マルチカラーLED Multi-color LED
●絶対最大定格 Absolute Maximum Rating
●電気的光学的特性 Electrical and Optical Characteristics
●外形寸法図 Outline drawing
(Ta 25℃)
(Ta 25℃)
* IFPの条件はduty 1/10 、パルス幅0.1msecです。* Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
2.0(L)× 1.6(W)×0.75(H)mm
特徴 Features
同一パッケージで3色発光3 co lo r s em i t t i ng f rom a s ing le package
1. 上面発光、小型・高出力Upward- l ight ing, compact /h igh output type
2.
0.085
0.085
0.30.4
0.192
0.3
0.3 0.342
0.55
③②①RedGreenBlue
⑥⑤④
2
1.60.35
0.75
LED素子(R)LED die(R)
LED素子(B)LED die(B)
LED素子(G)LED die(G)
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
LED center
包装数量:2,500個/1リール(φ180mm) Loaded quantity:2,500pcs./1 reel(φ180mm)
100*0.4
0.55
0.3
3
2
1
6
5
4
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
11
Technical
note
Technical
note
特徴 Features
1.7(L)× 1.4(W)×0.35(H)mm
単位 Unit : mm
●外形寸法図 Outline drawing
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
* NIST規格に準拠 * Compliant with NIST standards
Product code Colorvariation
Red
Green
Blue
CL-340T 125
78
76
72
30
20
20
4
P*1
(mW)
-25~+80 -30~+85
Pd(mW)
IF(mA)
IFP(mA)
VR(V)
IF(mA)
IF(mA)
typ(V)
max(V)
min(mcd)
typ(mcd)
Top(℃)
Tst(℃)
Product code
CL-340T
Color variation
Red
Green
Blue
618
530
470
5
5
5
1.85
2.7
2.75
2.47
3.19
3.19
5
5
5
30
180
40
16
55
11
●絶対最大定格 Absolute Maximum Rating
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
*1 Pは同時点灯時の全許容損失を示します。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 P means total value of power dissipation when both colors are on./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
100*2
VF λdtyp(nm)
IV*
①
⑥⑤
③
④
②R GB
1.05
0.250.3
0.55
0.450.7 1.2
0.2
同一パッケージで3色発光3 co lo r s em i t t i ng f rom a s ing le package
上面発光、小型・薄型Upward-lighting, compact/thin type
1.
2.CL-340 SeriesマルチカラーLED Multi-color LED
CL-165 SeriesマルチカラーLED Multi-color LED
●外形寸法図 Outline drawing
1.5(L)× 1.2(W)×0.7(H)mm
Product code Color variation
Yellow green
RedCL-165HR/YG 90
65
78
25
304
P*1
(mW)
-25~+80 -30~+85
Pd(mW)
IF(mA)
IFP(mA)
VR(V)
Top(℃)
Tst(℃)
●絶対最大定格 Absolute Maximum Rating (Ta 25℃)
*1 Pは同時点灯時の全許容損失を示します。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 P means total value of power dissipation when both colors are on./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
100*2
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
極性 Polarity
* NIST規格に準拠 * Compliant with NIST standards
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
③ ④
① ②
0.80.80.8
0.5 0.50.4
長波長LEDLongerwavelength
短波長LEDShorterwavelength
特徴 Features
同一パッケージで2色発光2 co lo r s em i t t i ng f rom a s ing le package
上面発光、小型・薄型Upward-lighting, compact/thin type
1.
2.
単位 Unit : mm
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
IF(mA)
IF(mA)
typ(V)
max(V)
min(mcd)
typ(mcd)
Product code
CL-165HR/YG
Color variation
Yellow green
Red 655
2.2
1.8
20
20
2.63
2.63
20
20
18
23
4.8
5.0
VF λptyp(nm)
575
λdtyp(nm)
IV*
基板PCB
(0.12)0.35
樹脂Resin
LED素子(G)LED die(G)
1.4
LED素子(B)LED die(B)
LED素子(R) LED die(R)
(0.675)
(0.975)
1.7
(0.53)(0.7) (0.87)
⑤
⑥
①
④6-φ0.3
カソードマークCathode mark
1.05
1.55 0.6
50.40.15
0.40.450.7
0.95
②
③
③ ④
(1.0)
(0.5)
(0.6) (0.3)1.2
1.5
① ②
LED素子(短波長LED)LED die(Shorter wavelength)
LED素子(長波長LED)LED die(Longer wavelength)
0.70.3
基板PCB
樹脂Resin
0.4 0.4
(0.25) 0.7
(0.8)
(0.35)
カソードマークCathode mark
はんだ付け電極(4ヶ所)Soldering terminal
4-R0.15
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
12
Technical
note
Technical
note
* NIST規格に準拠 * Compliant with NIST standards
Product codeColorvariation
Red
Green
Blue
CL-426F-AA 125
54
69
70
20 4
P*1
(mW)
-25~+80 -30~+85
Pd(mW)
IF(mA)
IFP(mA)
VR(V)
Top(℃)
Tst(℃)
VF
IR
IV
λd
IF=5mA
VR=4V
IF=5mA
IF=5mA
Parameter Symbol MIN TYP MAX UnitConditions
順電圧Forward Voltage
逆電流Reverse Current
光度Luminous Intensity*
ドミナント波長Dominant Wavelength
Color variation
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
1.36
2.33
2.38
81
113
23
624
518
461
2.0
2.7
2.8
160
250
52
628
530
470
2.47
3.19
3.24
100
2
2
637
542
479
V
μA
mcd
nm
VF
IR
IV
λd
IF=5mA
VR=4V
IF=5mA
IF=5mA
Parameter Symbol MIN TYP MAX UnitConditions
順電圧Forward Voltage
逆電流Reverse Current
光度Luminous Intensity*
ドミナント波長Dominant Wavelength
Color variation
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
(1.36)
(2.33)
(2.33)
(54)
(113)
(23)
(619)
(516)
(461)
(2.0)
(2.7)
(2.8)
(120)
(250)
(62)
(628)
(530)
(470)
(2.47)
(3.19)
(3.3)
(2)
(2)
(2)
(637)
(542)
(479)
V
μA
mcd
nm
CL-426 SeriesマルチカラーLED Multi-color LED
●絶対最大定格 Absolute Maximum Rating
●電気的光学的特性 Electrical and Optical Characteristics
●外形寸法図 Outline drawing
(Ta 25℃)
*1 Pは同時点灯時の全許容損失を示します。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 P means total value of power dissipation when both colors are on./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
100*2
Product codeColorvariation
Red
Green
Blue
CL-426F-AACC 125
(54)
(69)
(70)
20 4
P*1
(mW)
-25~+80 -30~+85
Pd(mW)
IF(mA)
IFP(mA)
VR(V)
Top(℃)
Tst(℃)
100*2
(Ta 25℃)
CL-426F-AA CL-426F-AACC
2.8(L)× 0.85(W)×0.35(H)mm
特徴 Features
同一パッケージで3色発光3 co lo r s em i t t i ng f rom a s ing le package
1. 側面発光、小型・超薄型Side-l ighting, compact /ultra-thin type
2.
(Ta 25℃) (Ta 25℃)[CL-426F-AA] [CL-426F-AACC]
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
(2)
(3)(1)
R B G
(4)
0.60.60.60.60.30.30.3
0.85
0.075
部品中心 Center
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
0.60.60.60.60.30.30.3
0.85
0.075
部品中心 Center
(2)
(3)(1)
R B G
(4)
(0.175)
0.35
0.45 0.85
(0.615)(1.32)
(2.13)2.8
(0.31) (0.31) (0.31)
(0.285) (0.285)(0.65) (0.65) 0.3
0.3
LED素子(R)LED die(R) 基板
PCB枠Reflector
樹脂 Resin
LED素子(B)LED die(B)
LED素子(G)LED die(G)
(1) (2) (3) (4)
2-R0.2
2-R0.175
はんだ付け電極Soldering terminal
はんだ付け電極Soldering terminal
単位 Unit : mm単位 Unit : mm
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
(0.175)
0.35
0.45 0.85
(0.615)(1.32)
(2.13)2.8
(0.31) (0.31) (0.31)
(0.285) (0.285)(0.65) (0.65) 0.3
0.3
LED素子(R)LED die(R) 基板
PCB枠Reflector
樹脂 Resin
LED素子(B)LED die(B)
LED素子(G)LED die(G)
(1) (2) (3) (4)
2-R0.2
2-R0.175
はんだ付け電極Soldering terminal
はんだ付け電極Soldering terminal
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
13
Technical
note
Technical
note
CL-425 SeriesマルチカラーLED Multi-color LED
特徴 Features
同一パッケージで3色発光3 co lo r s em i t t i ng f rom a s ing le package
1. 側面発光、小型・薄型Side-lighting, compact/thin type
2.
* NIST規格に準拠 * Compliant with NIST standards
Product codeColorvariation
Red
Green
Blue
CL-425F-V 125
80
69
68
30
20
20
4
P*1
(mW)
-25~+80 -30~+85
Pd(mW)
IF(mA)
IFP(mA)
VR(V)
Top(℃)
Tst(℃)
VF
IR
IV
λd
IF=5mA
VR=4V
IF=5mA
IF=5mA
Parameter Symbol MIN TYP MAX UnitConditions
順電圧Forward Voltage
逆電流Reverse Current
光度Luminous Intensity*
ドミナント波長Dominant Wavelength
Color variation
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
1.50
2.33
2.33
54
81
18
615
518
461
1.85
2.70
2.75
115
180
45
625
530
470
2.47
3.19
3.19
10
2
2
231
396
132
635
542
479
V
μA
mcd
nm
VF
IR
IV
λd
IF=5mA
VR=4V
IF=5mA
IF=5mA
Parameter Symbol MIN TYP MAX UnitConditions
順電圧Forward Voltage
逆電流Reverse Current
光度Luminous Intensity*
ドミナント波長Dominant Wavelength
Color variation
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
1.55
2.40
2.40
13.5
135
18
618
518
456
1.85
2.70
2.75
20
180
45
625
530
465
2.40
3.19
3.19
100
2
2
44
275
132
637
542
473
V
μA
mcd
nm
●絶対最大定格 Absolute Maximum Rating
●電気的光学的特性 Electrical and Optical Characteristics
●外形寸法図 Outline drawing
(Ta 25℃)
*1 Pは同時点灯時の全許容損失を示します。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 P means total value of power dissipation when both colors are on./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
100*2
Product codeColorvariation
Red
Green
Blue
CL-425F-C1CC (125)
(78)
(69)
(68)
(30)
(20)
(20)
4
P*1
(mW)
-25~+80 -30~+85
Pd(mW)
IF(mA)
IFP(mA)
VR(V)
Top(℃)
Tst(℃)
(100*2)
(Ta 25℃)
CL-425F-V
(Ta 25℃) (Ta 25℃)[CL-425F-V] [CL-425F-C1CC]
単位 Unit : mm単位 Unit : mm
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
3.25(L)× 1.35(W)×0.45(H)mm
LED素子(G)LED die(G)
LED素子(R)LED die(R)
枠 Reflector
LED素子(B)LED die(B)
はんだ付け電極(Snメッキ)Soldring terminal(Sn plating)
0.45
(0.225)
0.35
(1.44)
(1.88)
(2.32)
3.25
0.650.35 0.65 0.35
0.5 0.50.25 2-R0.252-R0.2
1.35
(3) (1)(2)(4)
(0.55) (3)
(2)
(1)(4)B R G
0.60.6 0.65 0.650.5 0.25 0.5
0.85
1.025
部品中心Center
はんだ付け電極(Snメッキ)Soldring terminal(Sn plating)
CL-425F-C1CC
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
LED素子(G)LED die(G)
LED素子(R)LED die(R)
枠 Reflector
LED素子(B)LED die(B)
はんだ付け電極(Snメッキ)Soldring terminal(Sn plating)
0.45
(0.225)
0.35
(1.44)
(1.88)
(2.32)
3.25
0.650.35 0.65 0.35
0.5 0.50.25 2-R0.252-R0.2
1.35
(3) (1)(2)(4)
(0.55) (3)
(2)
(1)(4)B R G
0.60.6 0.65 0.650.5 0.25 0.5
0.85
1.025
部品中心Center
はんだ付け電極(Snメッキ)Soldring terminal(Sn plating)
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
14
Technical
note
Technical
note
* NIST規格に準拠 * Compliant with NIST standards
VF
IR
IV
λd
IF=20mA
VR=4V
IF=20mA
IF=20mA
Parameter Symbol MIN TYP MAX UnitConditions
順電圧Forward Voltage
逆電流 Reverse Current
光度Luminous Intensity*
ドミナント波長Dominant Wavelength
Color variation
Red
Green
Blue
Red
Red
Green
Blue
Red
Green
Blue
1.75
2.72
2.72
(1,020)
(2,560)
(390)
(624)
(528)
(460)
2.68
3.81
3.81
(10)
V
μA
mcd
nm
CL-Z891 Series
単位 Unit : mm
マルチカラーLED Multi-color LED
●電気的光学的特性 Electrical and Optical Characteristics
●外形寸法図 Outline drawing
(Ta 25℃)
4.7(L)× 1.05(W)×1.1(H)mm
特徴 Features
同一パッケージで3色発光3 co lo r s em i t t i ng f rom a s ing le package
1. 側面発光、高出力Side-lighting, high output type
2. ツェナーダイオードを搭載し、静電耐圧に優れるZener diode mounted for excellence in electrostatic withstand voltage
3.
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
1.1
(0.93)
(3.22) (0.4)
0.3
0.9251.875
0.650.65 0.65 0.65 0.3
はんだ付け電極Soldering terminal
1.05
2.8253.775
2
保護素子Protection die
4 5
1 3 6
B R G
(3.42)4.7
1 2 3 4 5 6
LED素子(R)LED die(R)
LED素子(G)LED die(G)
LED素子(B)LED die(B)
0.35
6-R0.225
レジスト Resist
0.3 0.3 0.3 0.3 0.3
0.125
0.85
0.65 0.65 0.65 0.65 0.65 0.65
部品中心Center
包装数量:2,000個/1リール(φ180mm) Loaded quantity:2,000pcs./1 reel(φ180mm)
Series Color variation
Red
Green
Blue
CL-Z891
66.25
93.75
93.75
25
25
25
4
-25~+85 -30~+100
Pd(mW)
IF(mA)
IFP(mA)
VR(V)
Top(℃)
Tst(℃)
●絶対最大定格 Absolute Maximum Rating (Ta 25℃)
100*
* IFPの条件はduty 1/10 、パルス幅0.1msecです。* Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
2-R0.3
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
15
Technical
note
Technical
note
2.8(L)× 1.0(W)×0.6(H)mm
CL-385 SeriesマルチカラーLED Multi-color LED
●外形寸法図 Outline drawing
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
極性 Polarity
Product code Color variation
Orange
Green
* NIST規格に準拠 * Compliant with NIST standards
IF(mA)
IF(mA)
IF(mA)
typ(V)
max(V)
min(mcd)
typ(mcd)
typ(nm)
CL-385TD2/HG5605
530
20
20
2.1
3.3
2.68
3.91
20
20
10
20
180
100
64
36
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VF λd IV*
Product code Colorvariation
Orange
GreenCL-385TD2/HG5 90
80
76
30
204
P*1
(mW)
-25~+80 -30~+85
Pd(mW)
IF(mA)
IFP(mA)
VR(V)
Top(℃)
Tst(℃)
●絶対最大定格 Absolute Maximum Rating (Ta 25℃)
*1 Pは同時点灯時の全許容損失を示します。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 P means total value of power dissipation when both colors are on./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
100*2
0.6
(0.3) 0.45
(1.17) 0.462.8
LED素子(HG5)LED die(HG5)
LED素子(TD2)LED die(TD2)
0.35 0.35
0.951.85
0.3 0.3 0.3
2-R0.3
2-R0.2
はんだ付け電極Soldring terminal
基板PCB
樹脂Resin
(3) (4)(2)
TD2 HG5
(1)(2) (4)(3)(1)
(0.5)
0.6 0.6
1
0.60.60.6 0.60.3 0.3 0.3
0.85
部品中心Center
特徴 Features
同一パッケージで2色発光2 co lo r s em i t t i ng f rom a s ing le package
側面発光、小型・薄型Side-lighting, compact/thin type
1.
2.
単位 Unit : mm
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
2.8(L)× 1.35(W)×1.0(H)mm
CL-421 SeriesマルチカラーLED Multi-color LED
Product code Colorvariation
Red
Green
Blue
CL-421C4 140
50
140
130
20
30
30
4
P*1
(mW)
-25~+80 -30~+85
Pd(mW)
IF(mA)
IFP(mA)
VR(V)
Top(℃)
Tst(℃)
●絶対最大定格 Absolute Maximum Rating (Ta 25℃)
*1 Pは同時点灯時の全許容損失を示します。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 P means total value of power dissipation when both colors are on./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
100*2
●外形寸法図 Outline drawing
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
極性 Polarity
(1)
(3)(2)
G B R
(4)
0.35 0.6 0.6 0.35
0.4
2-R0.2
1.0
(0.2)
1.35
(0.425)(0.425)
2.6
2.8
(1)(2)(3)(4)
LED素子(R) LED die(R)
LED素子(B) LED die(B)LED素子(G) LED die(G)
枠Reflector
はんだ付け電極Soldering terminal
0.6 0.3 0.33.3
0.30.6 0.6 0.6
0.8
0.5
0.85
1.025
部品中心Center
特徴 Features
同一パッケージで3色発光3 co lo r s em i t t i ng f rom a s ing le package
側面発光Side-lighting type
1.
2.
単位 Unit : mm
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
* NIST規格に準拠 * Compliant with NIST standards
IF(mA)
IF(mA)
typ(V)
max(V)
min(mcd)
typ(mcd)
Product code
CL-421C4
Color variation
Red
Green
Blue
624
530
470
2.2
3.45
3.2
2.78
4.12
3.81
20
20
20
20
20
20
700
1,350
400
520
850
250
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VF λdtyp(nm)
IV*
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
16
Technical
note
Technical
note
CL-375 SeriesマルチカラーLED Multi-color LED
●外形寸法図 Outline drawing
2.4(L)× 1.35(W)×1.0(H)mm
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
極性 Polarity
* NIST規格に準拠 * Compliant with NIST standards
IF(mA)
IF(mA)
typ(V)
max(V)
min(mcd)
typ(mcd)
Product code
CL-375HR/YG
Color variation
Yellow green
Red 655
2.2
1.8
20
20
2.63
2.63
20
20
18
23
4.7
5.0
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VF λptyp(nm)
575
λdtyp(nm)
IV*
●絶対最大定格 Absolute Maximum Rating (Ta 25℃)
*1 Pは同時点灯時の全許容損失を示します。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 P means total value of power dissipation when both colors are on./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
2-R0.3樹脂 Resin
基板 PCB
LED素子(長波長LED)LED die(Longer wavelength)
LED素子(短波長LED)LED die(Shorter wavelength)
はんだ付け電極Soldering terminal
カソードマークCathode mark
2.4(1.0) (0.7)
1
③ ② ①
1.35
0.8
(0.575)
0.4
20.70.85
1.2R0.2
1.2
1.075
② ③
0.4
①
0.585 0.5850.45 0.450.7
部品中心Center
長波長LEDLongerwavelength
短波長LEDShorter wavelength
特徴 Features
同一パッケージで2色発光2 co lo r s em i t t i ng f rom a s ing le package
側面発光、小型・薄型Side-lighting, compact/thin type
1.
2.
単位 Unit : mm
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
33 10 50 4 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
逆電流 Reverse Current*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VR(V)
VF
IR
IV
x, y
IF=5mA
VR=4V
IF=5mA
IF=5mA
2.9
250135
3.24
2
V
μA
mcd
x(±0.02)
0.260
0.260
0.360
0.360
y(±0.02)
0.188
0.293
0.431
0.330
a
b
c
d
Product code
CL-287S-WS
CL-287S Series高輝度白色LED High brightness white LED 特徴 Features
白色LEDWhite LED
上面発光、超小型・薄型Upward-lighting, ultra-compact/thin type
1.
2.
包装数量:3,500個/1リール(φ180mm) Loaded quantity:3,500pcs./1 reel(φ180mm)
1.0(L)× 0.5(W)×0.25(H)mm
●外形寸法図 Outline drawing
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
単位 Unit : mm
0.5
0.5
0.35
0.5
基板PCB
0.5
樹脂Resin
(0.08)
0.25
カソードマークCathode mark
はんだ付け電極Soldering terminal
(0.3)
1
LED素子LED die
(0.325)
Product code Color variation
Yellow green
RedCL-375HR/YG 90
65
78
25
304
P*1
(mW)
-25~+80 -30~+85
Pd(mW)
IF(mA)
IFP(mA)
VR(V)
Top(℃)
Tst(℃)
100*2
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
17
Technical
note
Technical
note
38 10 100 4 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
逆電流 Reverse Current*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
1.6(L)× 0.8(W)×0.235(H)mm
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VR(V)
VF
IR
IV
x, y
IF=5mA
VR=4V
IF=5mA
IF=5mA
2.9
250136
3.24
2
649
V
μA
mcd
x(±0.02)
0.260
0.260
0.360
0.360
y(±0.02)
0.188
0.293
0.435
0.330
a
b
c
d
Product code
CL-198N-WS
●外形寸法図 Outline drawing
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
0.80.70.8
0.8
(0.065)
0.235
カソードマークCathode mark
はんだ付け電極Soldering terminal
基板PCB
樹脂Resin
CL-198N Series高輝度白色LED High brightness white LED 特徴 Features
白色LEDWhite LED
上面発光、小型・超薄型Upward-lighting, compact/ultra-thin type
1.
2.
単位 Unit : mm
包装数量:7,000個/1リール(φ180mm) Loaded quantity:7,000pcs./1 reel(φ180mm)
145
1.6(L)× 0.8(W)×0.3(H)mm
76 20 50 4 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
逆電流 Reverse Current*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VR(V)
VF
IR
IV
x, y
IF=5mA
VR=4V
IF=5mA
IF=5mA
2.9
260
3.25
2
V
μA
mcd
x(±0.02)
0.260
0.260
0.360
0.360
y(±0.02)
0.188
0.293
0.435
0.330
a
b
c
d
Product code
CL-194S-WS
●外形寸法図 Outline drawing
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
(0.25)
0.3
(0.13)
(1.1) 基板
PCB
樹脂Resin
0.80.70.8
0.8
CL-194S Series高輝度白色LED High brightness white LED 特徴 Features
白色LEDWhite LED
上面発光、小型・超薄型Upward-lighting, compact/ultra-thin type
1.
2.
単位 Unit : mm
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
(0.3)
10.3
(0.8)
1.6
0.8(0.4)
LED素子LED die
カソードマーク(レジスト)Cathode mark(resist)
0.3
10.3
カソードマークCathode mark
(0.8)
(0.15)
1.6
0.8(0.4)
(2-R0.1)
(0.35)
カソードマークCathode mark
LED素子LED die
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
18
Technical
note
Technical
note
2.9
260141
76 20 100 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
1.6(L)× 0.8(W)×0.3(H)mm
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VF
IV
x, y
IF=5mA
IF=5mA
IF=5mA
3.24 V
mcd
x(±0.02)
0.260
0.260
0.360
0.360
y(±0.02)
0.188
0.293
0.435
0.330
a
b
c
d
Product code
CL-Z194S-WS
●外形寸法図 Outline drawing
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
0.80.70.8
0.8
(0.69) (1.1)
(0.25)
(0.15)
1.6
0.8
(0.13)
(0.21)
(2-R0.1)
(0.35)
カソードマークCathode mark
0.3
ツェナーZener
LED
基板PCB
樹脂Resin
LED素子LED die
はんだ付け電極Soldring terminal
CL-Z194S Series高輝度白色LED High brightness white LED 特徴 Features
白色LEDWhite LED
上面発光、小型・超薄型Upward-lighting, compact/ultra-thin type
ツェナーダイオードを搭載し、静電耐圧に優れるZener diode mounted for excellence in electrostatic withstand voltage
1.
2.
3.
単位 Unit : mm
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
2.0(L)× 0.8(W)×0.9(H)mm
20 20 4 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*2
逆電流 Reverse Current*2
光度 Luminous Intensity*3
色度座標 Chromaticity coordinates*4
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics*1
(Ta 25℃)
(Ta 25℃)
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅10msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 10msec width.
*1 The electrical and optical characteristics mentioned above include measurement tolerances of forward voltage±3% and axial luminous intensity±10%./*2 The values are based on 1-die performance./*3 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*4 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VR(V)
VF
IR
IV
x, y
IF=5mA
VR=4V
IF=5mA
IF=5mA
2.65
720
2.43
360
2.99
2
1,100
V
μA
mcd
x(±0.02)
0.265
0.265
0.310
0.310
y(±0.02)
0.185
0.265
0.338
0.258
a
b
c
d
Product code
CL-600S-CW15-SD
CL-600S Series高輝度白色LED High brightness white LED 特徴 Features
白色LEDWhite LED
上面発光、小型Upward-lighting, compact type
1.
2.
●外形寸法図 Outline drawing単位 Unit : mm
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
はんだ付け電極Soldering terminal
0.8
2
LED素子(製品中心)LED die(center of product)
0.890.36
(0.6) (0.075)
封止樹脂Seeling Resin
アノードマークAnode mark
1
0.65
0.9
0.9
0.811.34 0.65
0.06
部品中心Center
*1 上記電気的光学的特性には順電圧±3%、軸上光度±10%の測定公差があります。/*2 1素子当たりの値です。/*3 NIST規格に準拠、各素子同時点灯の値です。/*4 色度座標は、a、b、c、dに囲まれた範囲です。
包装数量:2,500個/1リール(φ180mm) Loaded quantity:2,500pcs./1 reel(φ180mm)
(0.3)
10.3
カソードマークCathode mark
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
19
Technical
note
Technical
note
72 20 50 4 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
逆電流 Reverse Current*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
3.4(L)× 1.25(W)×1.1(H)mm
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VR(V)
VF
IR
IV
x, y
IF=5mA
VR=4V
IF=5mA
IF=5mA
2.9
14055
3.24
2
V
μA
mcd
x(±0.02)
0.260
0.260
0.360
0.360
y(±0.02)
0.188
0.293
0.435
0.330
a
b
c
d
Product code
CL-260S-WS
●外形寸法図 Outline drawing
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
CL-260S Series高輝度白色LED High brightness white LED 特徴 Features
白色LEDWhite LED
上面発光、小型Upward-lighting, compact type
プリント基板背面からの自動実装が可能Automatically mountable from rear side of PCB
1.
2.
3.
単位 Unit : mm
1.25
φ2.4
4.2
1.076
LED素子LED die
1.25
3.4
(1.975)
(0.625) 1.1
(1.2)
(1.1)
基板PCB
樹脂Resin
0.3
カソードマークCathode mark
カソードマークCathode mark
はんだ付け電極Soldering terminal
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
76 20 50 4 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
逆電流 Reverse Current*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
1.0(L)× 0.5(W)×0.2(H)mm
CL-282S Series高輝度白色LED High brightness white LED
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
●外形寸法図 Outline drawing*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VR(V)
VF
IR
IV
x, y
IF=5mA
VR=4V
IF=5mA
IF=5mA
2.9
250
3.24
2
660136
V
μA
mcd
x(±0.02)
0.255
0.255
0.365
0.365
y(±0.02)
0.181
0.286
0.442
0.337
a
b
c
d
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
Product code
CL-282S-WZ
基板PCB
樹脂Resin
LED素子LED die
0.5
1
0.2(0.065)
0.5
0.5
0.5
0.5
0.35
はんだ付け電極Soldering terminal
特徴 Features
白色LEDWhite LED
上面発光、超小型・薄型Upward-lighting, ultra-compact/thin type
1.
2.
単位 Unit : mm
包装数量:7,000個/1リール(φ180mm) Loaded quantity:7,000pcs./1 reel(φ180mm)
2.4
0.5
(0.5)
カソードマークCathode mark
(0.325)
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
20
Technical
note
Technical
note
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
1.0(L)× 0.5(W)×0.3(H)mm
76 20 50 4 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
逆電流 Reverse Current*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VR(V)
VF
IR
IV
x, y
IF=5mA
VR=4V
IF=5mA
IF=5mA
2.9
170
3.24
2
88
V
μA
mcd
x(±0.02)
0.238
0.238
0.337
0.341
y(±0.02)
0.201
0.240
0.349
0.307
a
b
c
d
Product code
CL-830S-WSN
●外形寸法図 Outline drawing
0.2
0.6 0.60.3
(2)(1)
(1) (2)
0.5
0.5
0.6
0.05
1
2-R0.2(0.3)
0.150.3
基板PCB
LED素子LED die
樹脂Resin
カソードマークCathode mark
はんだ付け電極Soldering terminal
部品中心Center
CL-830S Series高輝度白色LED High brightness white LED 特徴 Features
白色LEDWhite LED
側面発光、小型Side-lighting, compact type
1.
2.
単位 Unit : mm
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
76 20 50 4 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
逆電流 Reverse Current*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅30msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 30msec width.
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VR(V)
VF
IR
IV
x, y
IF=5mA
VR=4V
IF=5mA
IF=5mA
2.9
115
3.24
2
V
μA
mcd
x(±0.02)
0.260
0.260
0.360
0.360
y(±0.02)
0.188
0.293
0.435
0.330
a
b
c
d
Product code
CL-482T-WS
1.8(L)× 1.0(W)×0.3(H)mm
CL-482T Series高輝度白色LED High brightness white LED
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
●外形寸法図 Outline drawing
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
1.2
1.2
0.91.2
特徴 Features
白色LEDWhite LED
側面発光、小型・薄型Side-lighting, compact/thin type
1.
2.
単位 Unit : mm
(0.15)
1.0
(0.68)
素子センターDie center
(0.9) 1.8
1.4
(0.2)
0.3
はんだ付け電極Soldering terminal
基板PCB
樹脂Resin
0.3
0.3
カソードマークCathode mark
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
21
Technical
note
Technical
note
1.8(L)× 1.0(W)×0.3(H)mm
76 20 100 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VF
IV
x, y
IF=5mA
IF=5mA
IF=5mA
2.47
81
3.04
198
V
mcd
x(±0.02)
0.281
0.255
0.297
0.315
y(±0.02)
0.238
0.265
0.328
0.299
a
b
c
d
Product code
CL-Z482T-WSA
●外形寸法図 Outline drawing
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
(0.15)
1.0
(0.68)
素子センターDie center
ツェナーZener
(0.7) 1.8
1.4
(0.2)
0.3
はんだ付け電極Soldering terminal
基板PCB
樹脂Resin
1.2
1.2
0.91.2
CL-Z482T Series高輝度白色LED High brightness white LED 特徴 Features
白色LEDWhite LED
側面発光、小型・薄型Side-lighting, compact/thin type
ツェナーダイオードを搭載し、静電耐圧に優れるZener diode mounted for excellence in electrostatic withstand voltage
1.
2.
3.
単位 Unit : mm
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
1.8(L)× 0.88(W)×0.2(H)mm
●外形寸法図 Outline drawing
76 20 100 4 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
逆電流 Reverse Current*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VR(V)
VF
IR
IV
x, y
IF=5mA
VR=4V
IF=5mA
IF=5mA
2.9
120
3.24
2
187
V
μA
mcd
x(±0.02)
0.260
0.260
0.360
0.360
y(±0.02)
0.188
0.293
0.435
0.330
a
b
c
d
Product code
CL-483S-WT
素子センターDie center
基板PCB
樹脂Resin
はんだ付け電極Soldering terminal
(0.1)
(0.9)
(1.8)
(1.4)
(0.2)
0.2(0.88)
(0.48)
(1)
(1)
(0.9)(1)
CL-483S Series高輝度白色LED High brightness white LED 特徴 Features
白色LEDWhite LED
側面発光、小型・薄型Side-lighting, compact/thin type
1.
2.
単位 Unit : mm
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
0.3
0.3
カソードマークCathode mark
カソードマークCathode mark
0.5
0.5
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
22
Technical
note
Technical
note
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
1.8(L)× 1.0(W)×0.3(H)mm
●外形寸法図 Outline drawing
76 20 100 4 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
逆電流 Reverse Current*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VR(V)
VF
IR
IV
x, y
IF=5mA
VR=4V
IF=5mA
IF=5mA
2.9
200
3.24
2
127
V
μA
mcd
x(±0.02)
0.260
0.260
0.320
0.320
y(±0.02)
0.199
0.264
0.369
0.304
a
b
c
d
Product code
CL-840S-WTST
(0.6) (0.6)(1.2)
(2)
(0.05)
(0.85)
(2)(1)
(1)
(0.55)
(1)
(0.9)
1.82-R0.15
0.3 0.3
(0.04)
(0.15)0.3
枠Reflector
LED素子LED die
樹脂Resin
はんだ付け電極Soldering terminal
部品中心Center
CL-840S Series高輝度白色LED High brightness white LED 特徴 Features
白色LEDWhite LED
側面発光、小型・薄型Side-lighting, compact/thin type
リフレクター付きReflector equipped
1.
2.
3.
単位 Unit : mm
76 20 50 4 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
逆電流 Reverse Current*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VR(V)
VF
IR
IV
x, y
IF=5mA
VR=4V
IF=5mA
IF=5mA
2.9
19099
3.24
2
V
μA
mcd
x(±0.02)
0.260
0.260
0.360
0.360
y(±0.02)
0.188
0.293
0.435
0.330
a
b
c
d
Product code
CL-270S-WS
1.6(L)× 1.15(W)×0.6(H)mm
CL-270S Series高輝度白色LED High brightness white LED
●外形寸法図 Outline drawing
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
特徴 Features
白色LEDWhite LED
側面発光、小型Side-lighting, compact type
1.
2.
単位 Unit : mm
(Top view)
1.2
1.2
1.20.9
基板PCB
樹脂Resin
LED素子LED die
0.6
1.6
0.68
(1.1)
(1.2)
(0.2)
(0.3) 1.15
はんだ付け電極Soldering terminal
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
カソードマークCathode mark
0.25
(0.25)
1.1
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
23
Technical
note
Technical
note
2.8(L)× 1.0(W)×0.6(H)mm
76 20 50 4 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
逆電流 Reverse Current*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VR(V)
VF
IR
IV
x, y
IF=5mA
VR=4V
IF=5mA
IF=5mA
2.9
380247.5
3.24
2
V
μA
mcd
x(±0.02)
0.242
0.242
0.342
0.342
y(±0.02)
0.175
0.285
0.412
0.320
a
b
c
d
Product code
CL-432F2-WS
CL-432F2 Series高輝度白色LED High brightness white LED
●外形寸法図 Outline drawing
特徴 Features
白色LEDWhite LED
側面発光、小型Side-lighting, compact type
リフレクター付きReflector equipped
1.
2.
3.
単位 Unit : mm
2.8(L)× 0.85(W)×0.4(H)mm
114 30 100 4 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
逆電流 Reverse Current*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VR(V)
VF
IR
IV
x, y
IF=20mA
VR=4V
IF=20mA
IF=20mA
3.3
1,380
2.7
900
3.7
2
2,288
V
μA
mcd
x(±0.02)
0.232
0.232
0.329
0.329
y(±0.02)
0.208
0.267
0.328
0.254
a
b
c
d
Product code
CL-435F2-AW01
CL-435F2 Series高輝度白色LED High brightness white LED
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
●外形寸法図 Outline drawing
特徴 Features
白色LEDWhite LED
側面発光、小型Side-lighting, compact type
リフレクター付きReflector equipped
1.
2.
3.
単位 Unit : mm
0.4
(0.2) 0.3
(1.4)
2.8
LED素子LED die
枠Reflector
0.951.85
0.3 0.30.60.6
4-R0.2
はんだ付け電極Soldring terminal
(3) (1)(2)(4)
(0.4)0.85
樹脂Resin
(1)
(3)(2) (4)
極性 Polarity
0.60.60.6 0.60.3 0.3 0.3
0.075
0.85
部品中心Center
基板PCB
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)0.60.60.6 0.6
0.3 0.3 0.3
0.85
部品中心Center
0.6
(0.3)
(0.075)
0.4
(1.4)
2.8
素子センターDie center
枠Reflector
0.951.85
0.3 0.30.60.6
2-R0.3
2-R0.2
はんだ付け電極Soldring terminal
(3) (1)(2)(4)
0.51
樹脂Resin
(1)
(3)(2) (4)
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
rTech
nical
note
Technical
note
CL-A120 Series高輝度白色LED High brightness white LED
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
●外形寸法図 Outline drawing
特徴 Features
バックライト光源用の白色LEDWhite LED for backlight source
側面発光Side-lighting type
ツェナーダイオードを搭載し、静電耐圧に優れるZener diode mounted for excellence in electrostatic withstand voltage
1.
2.
3.
単位 Unit : mm
32 10 50 4 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
逆電流 Reverse Current*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅0.1msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VR(V)
VF
IR
IV
x, y
IF=7mA
VR=4V
IF=7mA
IF=7mA
2.8
520362
3.42
2
754
V
μA
mcd
x(±0.02)
0.263
0.257
0.298
0.304
y(±0.02)
0.210
0.240
0.317
0.287
a
b
c
d
Product code
CL-963-1W-C01
1.4(L)× 1.05(W)×0.6(H)mm
CL-963 Series高輝度白色LED High brightness white LED
●外形寸法図 Outline drawing
特徴 Features
白色LEDWhite LED
側面発光、小型Side-lighting, compact type
3面発光Three-face lighting type
1.
2.
3.
単位 Unit : mm
2.8(L)× 0.95(W)×0.8(H)mm
3.7
3.71
155 40 100 40 -40~+100 -40~+100
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage
全光束 Luminous Flux
光度 Luminous Intensity*
色度座標 Chromaticity coordinates
●絶対最大定格 Absolute Maximum Rating
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
* IFPの条件はduty 1/10 、パルス幅0.1msecです。* Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
Pd(mW)
IF(mA)
IFP*
(mA)Top(℃)
Tst(℃)
IR(mA)
VF
φV
IV
x
y
IF=30mA
IF=30mA
IF=30mA
IF=30mA
3.45
(9.22)
3.4
0.265
0.230
3.2
3.09
V
lm
cd
Product code
CL-A120-1W-SD
* NIST規格に準拠 * Compliant with NIST standards
●外形寸法図 Outline drawing
(2.18)2.8
(0.5)
2R-0.2
(1.05)
0.7
(0.68)
(0.155)
0.50.8
(1) (2) (0.4)
0.95
0.7
0.70.075
0.7(0.155) (0.155) (2)(1)
枠Reflector
基板PCBLED素子
LED die
はんだ付け電極Soldering terminal
0.7
(1.05)
0.7 1.05
部品中心Center
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
(0.155)
0.57
0.8 0.80.5
部品中心Center
樹脂Resin
枠Reflector
素子センターDie center
はんだ付け電極Soldering terminal
レジストResist
1.4
(0.45) (0.181)
1.05
0.6
(0.43)
2-R0.225
0.5(0.45)
1.05
(0.535)
(2)(1) (2)
(1)
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
24
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
25
Technical
note
Technical
note
3.45
12.06
356 100 200 100 -40~+100 -40~+105
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage
全光束 Luminous Flux
光度 Luminous Intensity*
色度座標 Chromaticity coordinates
●絶対最大定格 Absolute Maximum Rating
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
* IFPの条件はduty 1/10 、パルス幅0.1msecです。* Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
Pd(mW)
IF(mA)
IFP*
(mA)Top(℃)
Tst(℃)
IR(mA)
140
Tj(℃)
VF
φV
IV
x
y
IF=80mA
IF=80mA
IF=80mA
IF=80mA
3.2
(27.8)
10.3
0.277
0.253
2.95
8.34
V
lm
cd
Product code
CL-A130-1W3-SD
242
300
70
90
150
180
70
90-40~+100 -40~+100
●絶対最大定格 Absolute Maximum Rating*1 (Ta 25℃)
Pd(mW)
IF(mA)
Top(℃)
Tst(℃)Product code
CL-A100-1W2-SD
CL-A100-2W2-SD
単位 Unit : mm
●外形寸法図 Outline drawing
極性 Polarity
極性 Polarity
4.5(L)× 1.6(W)×0.8(H)mm
* NIST規格に準拠 * Compliant with NIST standards
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
●外形寸法図 Outline drawing
IFP*
(mA)IR
(mA)
* IFPの条件はduty 1/10 、パルス幅0.1msecです。* Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
6.1
7.5
Parameter
順電圧 Forward Voltage
全光束 Luminous Flux
光度 Luminous Intensity*
色度座標 Chromaticity coordinates
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VF
φV
IV
x
y
x
y
IF=60mA
IF=80mA
IF=60mA
IF=80mA
IF=60mA
IF=80mA
IF=60mA
IF=80mA
CL-A100-1W2-SD
CL-A100-2W2-SD
CL-A100-1W2-SD
CL-A100-2W2-SD
CL-A100-1W2-SD
CL-A100-2W2-SD
CL-A100-1W2-SD
CL-A100-2W2-SD
3.15
3.05
(19)
(23.5)
7.8
9.5
0.269
0.238
0.269
0.238
3.4
3.3V
lm
cd
* NIST規格に準拠 * Compliant with NIST standards
Symbol MIN TYP MAX UnitConditions
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
1.6
1.35
(1) (2)
(2) (1)
(0.825) (2.25)4.5 0.8
1.2
1.35
枠Reflector
LED素子LED die
カソードマークCathode mark
CL-A-100-1W2-SD
Z-Di素子Z-Di die 樹脂
Resin
はんだ付け電極 Soldering terminal
(0.45)
1.6
1.35
(1) (2)
(2.25)4.5 0.8
1.2
1.35
枠Reflector
LED素子 LED dieカソードマークCathode mark
CL-A-100-2W2-SD
Z-Di素子Z-Di die
樹脂Resin
はんだ付け電極 Soldering terminal
(0.45)
(1.35) (1.35)
(2) (1)
2
3.3
2
1.7CL-A-100-1W2-SD、
CL-A-100-2W2-SD共通Common to CL-A-100-1W2-SD and CL-A-100-2W2-SD
CL-A100 Series高輝度白色LED High brightness white LED
CL-A130 Series高輝度白色LED High brightness white LED
特徴 Features
バックライト光源用の白色LEDWhite LED for backlight source
上面発光Upward-lighting type
ツェナーダイオードを搭載し、静電耐圧に優れるZener diode mounted for excellence in electrostatic withstand voltage
1.
2.
3.
単位 Unit : mm
特徴 Features
バックライト光源用の白色LEDWhite LED for backlight source
上面発光Upward-lighting type
ツェナーダイオードを搭載し、静電耐圧に優れるZener diode mounted for excellence in electrostatic withstand voltage
1.
2.
3.
単位 Unit : mm
2.5(L)× 1.4(W)×0.85(H)mm
2.5
1.4
0.85 (0.55)
(0.1) (0.1)
0.81 1.19
(1) (2)
(0.2)
カソードマークCathode mark
アノードマークAnode mark
はんだ付け電極Soldering terminal
LED素子LED die
枠Reflector
保護端子Protection die
(1) (2)
0.51.190.06
0.440.810.5
0.75
1.1
1.5
部品中心Center
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
26
Technical
note
Technical
note
2.85
(2.8)
8.75
(9.42)
3.1
(3.05)
(31)
(34.1)
10.8
(11.8)
0.277
0.253
0.277
0.253
3.35
(3.3)
12.64
(13.91)
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
●外形寸法図 Outline drawing単位 Unit : mm
2.5(L)× 1.4(W)×0.85(H)mm
CL-A131 Series高輝度白色LED High brightness white LED 特徴 Features
バックライト光源用の白色LEDWhite LED for backlight source
上面発光Upward-lighting type
ツェナーダイオードを搭載し、静電耐圧に優れるZener diode mounted for excellence in electrostatic withstand voltage
1.
2.
3.
特徴 Features
単色発光LEDMono-color lighting LED
上面発光、小型・超薄型Upward-lighting, compact/ultra-thin type
1.
2.1.6(L)× 0.8(W)×0.2(H)mm
CL-198T Series一般色LED(単色タイプ) General Color LED(Mono-color Type)
78 30 100* 4 -25~+80 -30~+85
●絶対最大定格 Absolute Maximum Rating (Ta 25℃)
* IFPの条件はduty 1/10 、パルス幅0.1msecです。* Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
Pd(mW)
IF(mA)
IFP(mA)
Top(℃)
Tst(℃)
VR(V)Product code
CL-198T-TD2
Product code
* NIST規格に準拠 * Compliant with NIST standards
IF(mA)
IF(mA)
typ(V)
max(V)
min(mcd)
typ(mcd)
CL-198T-TD2 (605)(2.0)5 (2.68) 5 (30)(13.6)
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VF λdtyp(nm)
IV*
極性 Polarity
(0.5)
1.6
0.8
(0.065)
(0.4)0.2
LED素子LED die
基板PCB 樹脂
Resin
0.80.70.8
0.8
はんだ付け電極Soldering terminal
345
(495)
100
(150)
200
(200)
90
90
140
140-40~+100 -40~+105
●絶対最大定格 Absolute Maximum Rating*1 (Ta 25℃)
CL-A131-1W4-SD
CL-A131-1W5-SD
単位 Unit : mm
●外形寸法図 Outline drawing* IFPの条件はduty 1/10 、パルス幅0.1msecです。* Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
Parameter
順電圧 Forward Voltage
全光束 Luminous Flux
光度 Luminous Intensity*
色度座標 Chromaticity coordinates
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VF
φV
IV
x
y
x
y
IF=80mA
IF=80mA
IF=80mA
IF=80mA
IF=80mA
IF=80mA
IF=80mA
IF=80mA
CL-A131-1W4-SD
CL-A131-1W5-SD
CL-A131-1W4-SD
CL-A131-1W5-SD
CL-A131-1W4-SD
CL-A131-1W5-SD
CL-A131-1W5-SD
CL-A131-1W5-SD
V
lm
cd
* NIST規格に準拠 * Compliant with NIST standards
Symbol MIN TYP MAX UnitConditions
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
CL-A-131-1W4-SD
CL-A-131-1W5-SD
CL-A-131-1W4-SD、CL-A-131-1W5-SD共通Common to CL-A-131-1W4-SD and CL-A-131-1W5-SD
単位 Unit : mm
極性 Polarity
2.5
1.4
0.85
(0.1) (0.1)
0.81 1.19
(1) (2)
(0.2)
カソードマークCathode mark
アノードマークAnode mark
LED素子LED die
Z-Di素子 Z-Di die
枠Reflector はんだ付け電極
Soldering terminal
(1) (2)
0.51.190.3 0.2
0.440.060.810.5
0.750.9
1.1
1.5
1.3
部品中心Centerマスク形状
Hatching area
保護端子Protection die
極性 Polarity
2.5
1.4
0.85
(0.1) (0.1)
0.81 1.19
(1) (2)
(0.2)
カソードマークCathode mark
アノードマークAnode mark
LED素子LED die
枠Reflector はんだ付け電極
Soldering terminal
(1) (2)
保護端子Protection die
Pd(mW)
IF(mA)
IFP*
(mA)Top(℃)
Tst(℃)
IR(mA)
Tj(℃)Product code
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
包装数量:7,000個/1リール(φ180mm) Loaded quantity:7,000pcs./1 reel(φ180mm)
(0.3)
10.3
カソードマークCathode mark
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
27
Technical
note
Technical
note
76
76
78
78
20
20
30
30
50*
100*
100*
100*
4
4
4
4
-25~+80
-25~+80
-25~+80
-25~+80
-30~+85
-30~+85
-30~+85
-30~+85
●絶対最大定格 Absolute Maximum Rating (Ta 25℃)
* IFPの条件はduty 1/10 、パルス幅0.1msecです。* Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
Pd(mW)
IF(mA)
IFP(mA)
Top(℃)
Tst(℃)
VR(V)Product code
CL-198N-HB8
CL-198N-HGC
CL-198N-TLY
CL-198N-TR1
* NIST規格に準拠 * Compliant with NIST standards
IF(mA)
IF(mA)
typ(V)
max(V)
min(mcd)
typ(mcd)
Product code
527
590
2.75
2.1
7
5
4
10
3.45
3.19
2.63
2.47
7
5
4
10
50
136.4
11.8
43.6
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VF λdtyp(nm)
IV*
特徴 Features
単色発光LEDMono-color lighting LED
1. 上面発光、小型・超薄型Upward-lighting, compact/ultra-thin type
2.
CL-198N Series一般色LED(単色タイプ) General Color LED(Mono-color Type)
包装数量:7,000個/1リール(φ180mm) Loaded quantity:7,000pcs./1 reel(φ180mm)
1.6(L)× 0.8(W)×0.235(H)mm
CL-198N-HB8
CL-198N-HGC
CL-198N-TLY
CL-198N-TR1
単位 Unit : mm
●外形寸法図 Outline drawing
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
LED素子LED die
1.6
(0.5)
0.8
(0.4)
はんだ付け電極Soldering terminal
(0.065)
基板PCB
樹脂Resin
0.235
0.8
0.7
0.8
0.8
極性Polarity
10.3
(0.3)
カソードマークCathode mark
極性Polarity
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
28
Technical
note
Technical
note単位 Unit : mm
●外形寸法図 Outline drawing
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
76
76
50
78
80
78
20
20
20
30
30
30
100*
100*
100*
100*
100*
100*
4
4
4
4
4
4
-25~+80
-25~+80
-25~+80
-25~+80
-25~+80
-25~+80
-30~+85
-30~+85
-30~+85
-30~+85
-30~+85
-30~+85
●絶対最大定格 Absolute Maximum Rating (Ta 25℃)
* IFPの条件はduty 1/10 、パルス幅0.1msecです。* Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
Pd(mW)
IF(mA)
IFP(mA)
Top(℃)
Tst(℃)
VR(V)Product code
CL-197HB1
CL-197HG5
CL-197YG
CL-197TLY
CL-197TD2
CL-197TR2
* NIST規格に準拠 * Compliant with NIST standards
IF(mA)
IF(mA)
typ(V)
max(V)
min(mcd)
typ(mcd)
Product code
470
605
2.9
3.3
2.2
1.95
2.1
2.1
5
20
20
2
20
20
3.24
3.91
2.63
2.47
2.68
2.6
5
20
20
2
20
20
5.4
36.4
9
2.7
63.6
22
20
100
18
180
80
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VF λdtyp(nm)
IV*
特徴 Features
単色発光LEDMono-color lighting LED
1. 上面発光、小型・薄型Upward-lighting, compact/thin type
2.
CL-197 Series一般色LED(単色タイプ) General Color LED(Mono-color Type)
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
0.8
0.7
0.8
0.8
CL-197HB1
CL-197HG5
CL-197YG
CL-197TLY
CL-197TD2
CL-197TR2
1.6
(1.08)
0.8 (0.12)
(0.4) 0.4
LED素子LED die
基板PCB
樹脂Resin
1.6(L)× 0.8(W)×0.4(H)mm
(0.3)
10.3
カソードマークCathode mark
はんだ付け電極Soldering terminal(2-R0.15)
30 100* 4 -25~+80 -30~+85
●絶対最大定格 Absolute Maximum Rating (Ta 25℃)
* IFPの条件はduty 1/10 、パルス幅0.1msecです。* Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
Pd(mW)
IF(mA)
IFP(mA)
Top(℃)
Tst(℃)
VR(V)Product code
CL-670S-HBE
Product code
* NIST規格に準拠 * Compliant with NIST standards
IF(mA)
IF(mA)
typ(V)
max(V)
typ(mcd)
max(mcd)
CL-670S-HBE 4703.220 3.6 20 630
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VF λdtyp(nm)
IV*
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
29
Technical
note
Technical
note
2.0(L)× 0.8(W)×0.9(H)mm
CL-670S Series一般色LED(単色タイプ) General Color LED(Mono-color Type)
●外形寸法図 Outline drawing
特徴 Features
単色発光LEDMono-color lighting LED
上面発光、小型Upward-lighting, compact type
1.
2.
単位 Unit : mm
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
はんだ付け電極Soldering terminal
0.8
2
LED素子LED die
0.890.36(0.6)
樹脂Resin
カソードマークCathode mark
アノードマークAnode mark
0.65
0.9
0.9
0.811.34 0.65
0.06
部品中心Center
包装数量:2,500個/1リール(φ180mm) Loaded quantity:2,500pcs./1 reel(φ180mm)
1.6(L)× 0.8(W)×0.3(H)mm
76
78
20
30
50*
100*4
4
-25~+80
-25~+80
-30~+85
-30~+85
●絶対最大定格 Absolute Maximum Rating (Ta 25℃)
* IFPの条件はduty 1/10 、パルス幅0.1msecです。* Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
Pd(mW)
IF(mA)
IFP(mA)
Top(℃)
Tst(℃)
VR(V)Product code
CL-194S-HB8
CL-194S-TD2
Product code
* NIST規格に準拠 * Compliant with NIST standards
IF(mA)
IF(mA)
typ(V)
max(V)
min(mcd)
typ(mcd)
CL-194S-HB8
CL-194S-TD2
470
605
2.9
2.1
5
20
3.24
2.68
5
20
85
110
45.5
45
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VF λdtyp(nm)
IV*
●外形寸法図 Outline drawing
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
0.80.70.8
0.8
CL-194S Series一般色LED(単色タイプ) General Color LED(Mono-color Type) 特徴 Features
単色発光LEDMono-color lighting LED
上面発光、小型・薄型Upward-lighting, compact/thin type
1.
2.
単位 Unit : mm
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
(0.25)
0.3
(0.13)
(1.1) 基板
PCB
樹脂Resin
0.3
10.3
カソードマークCathode mark
(0.8)
(0.15)
1.6
0.8(0.4)
(2-R0.1)
(0.35)
カソードマークCathode mark
LED素子LED die
570
605
18
60
7.1
23
2.2
2.1
2.2
1.8
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
30
Technical
note
Technical
note
50
78
50
78
20
30
20
30
100*
100*
100*
100*
4
4
4
4
-25~+80
-25~+80
-25~+80
-25~+80
-30~+85
-30~+85
-30~+85
-30~+85
●絶対最大定格 Absolute Maximum Rating (Ta 25℃)
* IFPの条件はduty 1/10 、パルス幅0.1msecです。* Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
Pd(mW)
IF(mA)
IFP(mA)
Top(℃)
Tst(℃)
VR(V)Product code
CL-196YG
CL-196TLY
CL-196D
CL-196HR
* NIST規格に準拠 * Compliant with NIST standards
IF(mA)
IF(mA)
typ(V)
max(V)
min(mcd)
typ(mcd)
Product code
20
20
20
20
2.63
2.63
2.63
2.63
20
20
20
20
5.0
16
2.4
5.0
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VF λdtyp(nm)
655
λptyp(nm)
IV*
特徴 Features
単色発光LEDMono-color lighting LED
1. 上面発光、小型Upward-lighting, compact type
2.
CL-196 Series一般色LED(単色タイプ) General Color LED(Mono-color Type)
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
CL-196YG
CL-196TLY
CL-196D
CL-196HR
1.6(L)× 0.8(W)×0.6(H)mm
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
0.80.70.8
0.8
1.6
(0.52)
0.8 (0.18)
(0.4) 0.6
基板PCB
樹脂Resin
LED素子LED die
(0.3)
10.3 カソードマーク
Cathode mark
はんだ付け電極Soldering terminal
(2-R0.15)
●外形寸法図 Outline drawing
LED素子(YG, TLY, D) LED die(YG, TLY, D) 単位 Unit : mm単位 Unit : mm
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
0.80.70.8
0.8
LED素子(HR) LED die(HR)
1.6
(1.08)
0.8 (0.18)
(0.4) 0.6
基板PCB
樹脂Resin
LED素子LED die
(0.3)
10.3 カソードマーク
Cathode mark
はんだ付け電極Soldering terminal
(2-R0.15)
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
31
Technical
note
Technical
note
1.6(L)× 0.8(W)×0.8(H)mm
特徴 Features
単色発光LEDMono-color lighting LED
1. 上面発光、小型Upward-lighting, compact type
2.
CL-195 Series一般色LED(単色タイプ) General Color LED(Mono-color Type)
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
655
3.0
18
6.4
7.1
23
2.2
2.2
2.1
2.2
1.8
50
50
50
50
78
20
20
20
20
30
100*
100*
100*
100*
100*
4
4
4
4
4
-25~+80
-25~+80
-25~+80
-25~+80
-25~+80
-30~+85
-30~+85
-30~+85
-30~+85
-30~+85
●絶対最大定格 Absolute Maximum Rating (Ta 25℃)
* IFPの条件はduty 1/10 、パルス幅0.1msecです。* Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
Pd(mW)
IF(mA)
IFP(mA)
Top(℃)
Tst(℃)
VR(V)Product code
CL-195PG
CL-195YG
CL-195Y
CL-195D
CL-195HR
* NIST規格に準拠 * Compliant with NIST standards
IF(mA)
IF(mA)
typ(V)
max(V)
min(mcd)
typ(mcd)
Product code
20
20
20
20
20
2.63
2.63
2.63
2.63
2.63
20
20
20
20
20
1.0
5.0
2.6
2.4
5.0
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VF λptyp(nm)
557
570
586
605
λdtyp(nm)
IV*
CL-195PG
CL-195YG
CL-195Y
CL-195D
CL-195HR
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
0.80.70.8
0.8
1.6
(0.52)
(0.28)
0.8
基板PCB
樹脂Resin
LED素子LED die
0.8
(0.4)
(0.3)
10.3
カソードマークCathode mark
はんだ付け電極Soldering terminal
(2-R0.15)
●外形寸法図 Outline drawing
LED素子(PG, YG, Y, D) LED die(PG, YG, Y, D) 単位 Unit : mm単位 Unit : mm LED素子(HR) LED die(HR)
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
0.80.70.8
0.8
1.6
(1.08)
(0.28)
0.8
基板PCB
樹脂Resin
LED素子LED die0.8
(0.4)
(0.3)
10.3
カソードマークCathode mark
はんだ付け電極Soldering terminal
(2-R0.15)
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
32
2.0(L)× 1.25(W)×1.1(H)mm
特徴 Features
単色発光LEDMono-color lighting LED
1. 上面発光、小型Upward-lighting, compact type
2.
CL-170 Series一般色LED(単色タイプ) General Color LED(Mono-color Type)
Technical
note
Technical
note
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
655
10
18
6.4
7.1
23
2.2
2.2
2.1
2.2
1.8
65
65
65
65
78
25
25
25
25
30
100*
100*
100*
100*
100*
4
4
4
4
4
-25~+80
-25~+80
-25~+80
-25~+80
-25~+80
-30~+85
-30~+85
-30~+85
-30~+85
-30~+85
●絶対最大定格 Absolute Maximum Rating (Ta 25℃)
* IFPの条件はduty 1/10 、パルス幅0.1msecです。* Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
Pd(mW)
IF(mA)
IFP(mA)
Top(℃)
Tst(℃)
VR(V)Product code
CL-170G
CL-170YG
CL-170Y
CL-170D
CL-170HR
* NIST規格に準拠 * Compliant with NIST standards
IF(mA)
IF(mA)
typ(V)
max(V)
min(mcd)
typ(mcd)
Product code
20
20
20
20
20
2.63
2.63
2.63
2.63
2.63
20
20
20
20
20
2.5
4.7
2.6
2.4
5.0
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VF λptyp(nm)
570
575
589
605
λdtyp(nm)
IV*
CL-170G
CL-170YG
CL-170Y
CL-170D
CL-170HR
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
1.2
0.9
1.2
1.2
2.0
(1.4)
(0.3)
(0.625)
1.25
1.1
0.5カソードマークCathode mark
基板PCB
樹脂Resin
(0.75)
(0.4)
1.2
0.4
はんだ付け電極Soldering terminal
LED素子LED die
●外形寸法図 Outline drawing
LED素子(G, YG, Y, D) LED die(G, YG, Y, D) 単位 Unit : mm単位 Unit : mm LED素子(HR) LED die(HR)
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
1.2
0.9
1.2
1.2
2.0
(1.4)
(0.3)
(0.625)
1.25
1.1
0.5カソードマークCathode mark
基板PCB
樹脂Resin
(1.25)
(0.4)
1.2
0.4
はんだ付け電極Soldering terminal
LED素子LED die
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
33
Technical
note
Technical
note
3.4(L)× 1.25(W)×1.1(H)mm
特徴 Features
単色発光LEDMono-color lighting LED
1. 上面発光、小型Upward-lighting, compact type
2. プリント基板背面からの自動実装が可能Automatically mountable from rear side of PCB
3.
CL-260 Series一般色LED(単色タイプ) General Color LED(Mono-color Type)
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
567
575
589
605
10
18
6.4
180
23
2.2
2.2
2.1
2.1
1.8
65
65
65
78
78
25
25
25
30
30
100*
100*
100*
100*
100*
4
4
4
4
4
-25~+80
-25~+80
-25~+80
-25~+80
-25~+80
-30~+85
-30~+85
-30~+85
-30~+85
-30~+85
●絶対最大定格 Absolute Maximum Rating (Ta 25℃)
* IFPの条件はduty 1/10 、パルス幅0.1msecです。* Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
Pd(mW)
IF(mA)
IFP(mA)
Top(℃)
Tst(℃)
VR(V)Product code
CL-260G
CL-260YG
CL-260Y
CL-260TD2
CL-260HR
* NIST規格に準拠 * Compliant with NIST standards
IF(mA)
IF(mA)
typ(V)
max(V)
min(mcd)
typ(mcd)
Product code
20
20
20
20
20
2.63
2.63
2.63
2.63
2.63
20
20
20
20
20
2.5
5.0
2.6
60
5.0
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VF λdtyp(nm)
655
λptyp(nm)
IV*
CL-260G
CL-260YG
CL-260Y
CL-260TD2
CL-260HR
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
1.25
φ2.4
1.076
4.2 基板穴
Cutout
1.25 1.10.3
(0.625)
(1.2)
(1.1)
3.4
(1.975)
LED素子LED die
基板PCB
樹脂Resin
カソードマークCathode mark
2.4
0.5
(0.5)
はんだ付け電極Soldering terminal
カソードマークCathode mark
●外形寸法図 Outline drawing
LED素子(G, YG, Y, TD2) LED die(G, YG, Y, TD2) 単位 Unit : mm単位 Unit : mm LED素子(HR) LED die(HR)
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
1.25
φ2.4
1.076
4.2 基板穴
Cutout
1.25 1.10.3
(0.625)
(1.2)
(1.1)
3.4
(1.975)
LED素子LED die
基板PCB
樹脂Resin
カソードマークCathode mark
2.4
0.5
(0.5)
はんだ付け電極Soldering terminal
カソードマークCathode mark
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
34
1.6(L)× 1.15(W)×0.6(H)mm
特徴 Features
単色発光LEDMono-color lighting LED
1. 側面発光、小型・薄型Side-lighting, compact/thin type
2.
CL-270 Series一般色LED(単色タイプ) General Color LED(Mono-color Type)
Technical
note
Technical
note
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
50
50
50
50
78
20
20
20
20
30
100*
100*
100*
100*
100*
4
4
4
4
4
-25~+80
-25~+80
-25~+80
-25~+80
-25~+80
-30~+85
-30~+85
-30~+85
-30~+85
-30~+85
●絶対最大定格 Absolute Maximum Rating (Ta 25℃)
* IFPの条件はduty 1/10 、パルス幅0.1msecです。* Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
Pd(mW)
IF(mA)
IFP(mA)
Top(℃)
Tst(℃)
VR(V)Product code
CL-270G
CL-270YG
CL-270Y
CL-270D
CL-270HR
* NIST規格に準拠 * Compliant with NIST standards
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
655
10
18
6.4
7.1
23
2.2
2.2
2.1
2.2
1.8
IF(mA)
IF(mA)
typ(V)
max(V)
min(mcd)
typ(mcd)
Product code
20
20
20
20
20
2.63
2.63
2.63
2.63
2.63
20
20
20
20
20
2.5
5.0
2.6
2.4
5.0
VF λptyp(nm)
570
575
590
605
λdtyp(nm)
IV*
CL-270G
CL-270YG
CL-270Y
CL-270D
CL-270HR
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
1.2
0.9
1.2
1.2
●外形寸法図 Outline drawing
LED素子(G, YG, Y, D) LED die(G, YG, Y, D) 単位 Unit : mm単位 Unit : mm LED素子(HR) LED die(HR)
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
1.2
0.9
1.2
1.2
(1.1)
(1.2)
(0.2)(0.3)
1.6
0.61.15
0.68樹脂Resin
基板PCB
LED素子LED die
(0.25)
1.1
0.25
カソードマークCathode mark
はんだ付け電極Soldering terminal
(1.1)
(1.2)
(0.2)(0.3)
1.6
0.61.15
0.68樹脂Resin
基板PCB
LED素子LED die
(0.25)
1.1
0.25
カソードマークCathode mark
はんだ付け電極Soldering terminal
極性Polarity
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
35
Technical
note
Technical
note
単位 Unit : mm
●外形寸法図 Outline drawing
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
58
78
72
76
30
30
20
20
100*
100*
100*
50*
4
4
4
4
-25~+80
-25~+80
-25~+80
-25~+80
-30~+85
-30~+85
-30~+85
-30~+85
●絶対最大定格 Absolute Maximum Rating (Ta 25℃)
* IFPの条件はduty 1/10 、パルス幅0.1msecです。* Conditions for IFP are pulse of 1/10 duty and 0.1msec width.
Pd(mW)
IF(mA)
IFP(mA)
Top(℃)
Tst(℃)
VR(V)Product code
CL-482S-TR2
CL-482S-TD2
CL-482S-HG8
CL-482S-HB8
* NIST規格に準拠 * Compliant with NIST standards
IF(mA)
IF(mA)
typ(V)
max(V)
min(mcd)
typ(mcd)
Product code
CL-482S-TR2
CL-482S-TD2
CL-482S-HG8
CL-482S-HB8
630
605
530
470
2.1
2.1
2.9
2.9
20
20
5
5
2.68
2.68
3.4
3.24
20
20
5
5
80
110
140
32
23
23
63.6
20
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VF λdtyp(nm)
IV*
特徴 Features
単色発光LEDMono-color lighting LED
1. 側面発光、小型・薄型Side-lighting, compact/thin type
2. プリント基板背面からの自動実装が可能Automatically mountable from rear side of PCB
3.
CL-482S Series一般色LED(単色タイプ) General Color LED(Mono-color Type)
1.8(L)× 1.1(W)×0.3(H)mm
1.2
1.2
0.9
1.2
基板PCB
樹脂Resin
LED素子LED die
(0.15)
0.3
1.8
1.1
(0.68)
(0.9)
(0.2)1.4
はんだ付け電極Soldering terminal
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
カソードマークCathode mark
0.3
0.3
*1 順電圧の測定誤差は±3%です。/*2 NIST規格に準拠。/*3 全光束の測定誤差は±10%です。/*4 色度座標は、a、b、c、dに囲まれた範囲です。/*5 色度座標の測定公差は0.01以下です。/*6 各特性値はパルス幅20ms以内の測定値です。
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
36
Technical
note
Technical
note
単位 Unit : mm
●外形寸法図 Outline drawing
2.0(L)× 1.6(W)×0.7(H)mm
特徴 Features
上面発光のフラッシュ光源用LEDFlash LED of single upward-lighting
1. 小型・薄型Compact/thin type
2.
CL-773F Seriesフラッシュ光源用LED Flash LED
1,650 500 2,000 -40~+85 135 / 150
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
全光束 Luminous Flux*2・3
CCT Range
半値全角 View Angle at 50% Intensity
色度座標 Chromaticity coordinates*4・5
●絶対最大定格 Absolute Maximum Rating
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
* IFPの条件は以下の通りです。 * Condition of IFP (driving pulse) is as follows.(a) IFP=500mA-1,500mA:Pulse width≦500msec, duty≦10%, Ta=25℃.(b) IFP=1,500mA-2,000mA:Pulse width≦33msec, duty≦6.6%, Ta=25℃.
*1 The tolerance of Forward Voltage measurement is ±3% at our tester./*2 Compliant with NIST standards./*3 The tolerance of Luminous Flux measurement is ±10% at our tester./*4 Chromaticity coordinates are surrounded by points a, b, c, and d./*5 The tolerance of the Chromaticity coordinates measurement shall be under ±0.01./*6 Characteristics are measured during a pulse of 20ms.
Pd(mW)
IF(mA)
IFP*
(mA)Top(℃)
Tj max DC/Pulse(℃)
-40~+85
Tst(℃)
VF
φv
x, y
2φ
IF=1,000mA*6
IF=1,000mA*6
IF=1,000mA*6
IF=1,000mA*6
3.5
300
6,000
(120)
3.2
260
5,500
3.8
340
6,50
V
lm
K
deg
x(±0.02)
0.3133
0.3324
0.3323
0.3160
y(±0.02)
0.3251
0.3592
0.3348
0.3046
a
b
c
d
Product code
CL-773F-CW18C4-SDW
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
2.04
0.125
1.1
0.50.25
1.64 0.7
カソードマークCathode mark
アノードマークAnode mark1.45
0.75
0.575 0.35
1.5
0.425
0.175
1.125
0.35
アノードAnode
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
VF
φv
x, y
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
37
Technical
note
Technical
note
特徴 Features
上面発光のフラッシュ光源用LEDFlash LED of upward-lighting
1. 小型・薄型Compact/thin type
2.
2.0(L)× 1.6(W)×0.7(H)mm
CL-776A3 Seriesフラッシュ光源用LED Flash LED
*1 順電圧の測定誤差は±3%です。/*2 NIST規格に準拠。/*3 全光束の測定誤差は±10%です。/*4 色度座標は、a、b、c、dに囲まれた範囲です。/*5 色度座標の測定公差は0.01以下です。/*6 各特性値はパルス幅20ms以内の測定値です。
単位 Unit : mm
●外形寸法図 Outline drawing
1,903 500 1,000 -40~+85 135 / 150
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
全光束 Luminous Flux*2・3
CCT Range
色度座標 Chromaticity coordinates*4・5
●絶対最大定格 Absolute Maximum Rating
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
* IFPの条件は以下の通りです。 * Condition of IFP (driving pulse) is as follows.(a) IFP=250mA-500mA:Pulse width≦500msec, duty≦10%, Ta=25℃.(b) IFP=500mA-1,000mA:Pulse width≦300msec, duty≦10%, Ta=25℃.
*1 The tolerance of Forward Voltage measurement is ±3% at our tester./*2 Compliant with NIST standards./*3 The tolerance of Luminous Flux measurement is ±10% at our tester./*4 Chromaticity coordinates are surrounded by points a, b, c, and d./*5 The tolerance of the Chromaticity coordinates measurement shall be under ±0.01./*6 Characteristics are measured during a pulse of 20ms.
Pd(mW)
IF(mA)
IFP*
(mA)Top(℃)
Tj max DC/Pulse(℃)
-40~+85
Tst(℃)
IF=500mA*6
IF=1,000mA*6
IF=500mA*6
IF=1,000mA*6
IF=500mA*6
IF=1,000mA*6
IF=500mA*6
IF=1,000mA*6
3.3(3.65)150(240)
5,500(5,650)
2.8(3.1)125(200)
5,000(5,100)
3.8(4.22)180(285)
6,000(6,150)
V
lm
K
x(±0.02)0.3200.3490.3420.325x(±0.02)(0.317)(0.346)(0.339)(0.322)
y(±0.02)0.3690.3990.3110.296y(±0.02)(0.363)(0.393)(0.305)(0.290)
abcd
abcd
Product code
CL-776A3-CW04S2-SDW
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
2.04
0.125
1.1
0.50.25
1.64 0.75
カソードCathode
アノードAnode
1.45
0.75
0.575 0.35
1.5
0.425
0.175
1.125
0.35
アノードAnode
0.725
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
38
Technical
note
Technical
note
2.15 120 500 -25~+80 -30~+85
●絶対最大定格 Absolute Maximum Rating*1 (Ta 25℃)
Pd*2
(W)IF
(mA) IFP*3
(mA)Top(℃)
Tst(℃)Product code
CL-774S-3CW05-SDW
●外形寸法図 Outline drawing
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
2.04(L)× 1.64(W)×0.75(H)mm
72 20 100 5 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
逆電流 Reverse Current*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅30msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 30msec width.
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VR(V)
VF
IR
IV
x, y
IF=20mA
VR=5V
IF=20mA
IF=20mA
3.2
6.7
3.6
100
V
μA
cd
x(±0.02)
0.270
0.270
0.350
0.350
y(±0.02)
0.220
0.290
0.400
0.330
a
b
c
d
Product code
CL-770S-4WQ
●外形寸法図 Outline drawing
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
2.0(L)× 1.6(W)×0.7(H)mm
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*2
全光束 Luminous Flux*3
CCT Range
●電気的光学的特性 Electrical and Optical Characteristics*1 (Ta 25℃)
VF
φV
IF=500mA, 200ms
IF=500mA, 200ms
IF=500mA, 200ms
3.7
135
5,750
2.8
100
5,000
4.3
170
6,500
V
lm
K
*1 The characteristics are based on the characteristics of the LED under the condition of mounting standard substrate./*2 The tolerance of Forward Voltage measurement is ±3% at our tester./*3 The tolerance of Luminous Flux measurement is ±10% at our tester.
*1 当社の基準基板に実装した状態での測定値です。/*2 順電圧の測定誤差は±3%です。/*3 全光束の測定誤差は±10%です。
1.6
(0.15)1.3
0.7(0.22)
2.0
1.025
0.4250.25
(0.15)
はんだ付け電極Soldering terminal
LED素子LED die
枠Reflector
0.251.1
0.5
1.45
カソードCathode
アノードAnode
1.64
1.45
0.750.35
0.725
2.04
1.1
0.5
0.25
0.125
1.89
アノードAnode
光学中心Optical center
0.751.5
0.425
0.175
1.125
0.35
0.5750.35
CL-770S Series
CL-774S Series特徴 Features
上面発光のフラッシュ光源用LEDFlash LED of upward-lighting
小型・薄型Compact/thin type
高光効率タイプHigh light efficiency type
1.
2.
3.
特徴 Features
上面発光のフラッシュ光源用LEDFlash LED of upward-lighting
小型・薄型Compact/thin type
1.
2.
単位 Unit : mm
単位 Unit : mm
フラッシュ光源用LED Flash LED
フラッシュ光源用LED Flash LED
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
*1 1素子当たりの値です。/*2 Pdの条件はduty 1/10 、パルス幅200msecです。/*3 IFPの条件はduty 1/10 、パルス幅200msecです。*1 The values are based on 1-die performance./*2 Conditions for Pd are pulse of 1/10 duty and 200msec width./*3 Conditions for IFP are pulse of 1/10 duty and 200msec width.
ツェナーZener
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
39
Technical
note
Technical
note
*1 The tolerance of Forward Voltage measurement is ±3% at our tester./*2 Compliant with NIST standards./*3 The tolerance of Illuminance measurement is ±10% at our tester./*4 Chromaticity coordinates are surrounded by points a, b, c, and d./*5 According to CIE 1931.
3.6
100
3.2
5.6
10.1
14.3
2.8
5.0
7.2
72
343
20
100
100*2
500*3
5 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
逆電流 Reverse Current*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)[CL-690S-WQ/CL-690S-2WQ/CL-690S-3WQ]
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅30msecです。/*3 IFPの条件はduty 1/10 、パルス幅200msecです。
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP(mA)
Top(℃)
Tst(℃)
VR(V)
VF
IR
IV
x, y
IF=20mA
VR=5V
IF=20mA
IF=20mA
CL-690S-WQ
CL-690S-2WQ
CL-690S-3WQ
CL-690S-WQ
CL-690S-2WQ
CL-690S-3WQ
V
μA
cd
x(±0.02)
0.270
0.270
0.350
0.350
y(±0.02)
0.220
0.290
0.400
0.330
a
b
c
d
3.0
(3.8)
36.8
(96)
5,500
2.8
(3.4)
25.7
(72)
4,000
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
照度 Illuminance*2・3
色度座標 Chromaticity coordinates*4・5
CCT Range
(Ta 25℃)[CL-690S-2BW01-SD]
VF
IV
x, y
IF=100mA
IF=500mA, 200ms
IF=100mA
IF=500mA, 200ms
IF=100mA
IF=100mA
3.6
(4.3)
47.9
(120)
7,000
V
lux@1m
K
x(±0.02)
0.300
0.395
0.367
0.313
y(±0.02)
0.352
0.435
0.330
0.288
a
b
c
d
Product code
CL-690S-WQ
CL-690S-2WQ
CL-690S-3WQ
CL-690S-2BW01-SD
3.3(L)× 3.3(W)×1.5(H)mm
*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 30msec width./*3 Conditions for IFP are pulse of 1/10 duty and 200msec width.
*1 順電圧の測定誤差は±3%です。 /*2 NIST規格に準拠。 /*3 照度の測定誤差は±10%です。 /*4 色度座標は、a、b、c、dに囲まれた範囲です。/*5 CIE 1931に適合。
特徴 Features
上面発光のフラッシュ光源用LEDFlash LED of upward-lighting
1. リフレクター付き・高出力タイプReflector equipped/high-powered type
2.
CL-690S Series
2BW01-SDは、高出力・小電流に対応2BW01-SD supporting high power and small current
3.
フラッシュ光源用LED Flash LED
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
40
Technical
note
Technical
note
72 20 100 5 -25~+80 -30~+85
Parameter Symbol MIN TYP MAX UnitConditions
順電圧 Forward Voltage*1
逆電流 Reverse Current*1
光度 Luminous Intensity*2
色度座標 Chromaticity coordinates*3
●絶対最大定格 Absolute Maximum Rating*1
●電気的光学的特性 Electrical and Optical Characteristics
(Ta 25℃)
(Ta 25℃)
*1 1素子当たりの値です。/*2 IFPの条件はduty 1/10 、パルス幅30msecです。*1 The values are based on 1-die performance./*2 Conditions for IFP are pulse of 1/10 duty and 30msec width.
*1 1素子当たりの値です。/*2 NIST規格に準拠、各素子同時点灯の値です。/*3 色度座標は、a、b、c、dに囲まれた範囲です。*1 The values are based on 1-die performance./*2 Compliant with NIST standards. The values are based on the condition that each die lights simultaneously./*3 Chromaticity coordinates are surrounded by points a, b, c, and d.
Pd(mW)
IF(mA)
IFP*2
(mA)Top(℃)
Tst(℃)
VR(V)
VF
IR
IV
x, y
IF=20mA
VR=5V
IF=20mA
IF=20mA
3.2
14.4
3.6
100
V
μA
cd
x(±0.02)
0.270
0.270
0.350
0.350
y(±0.02)
0.220
0.290
0.400
0.330
a
b
c
d
Product code
CL-597S-4WQ
単位 Unit : mm●外形寸法図 Outline drawing
●外形寸法図 Outline drawing
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
5.0(L)× 5.0(W)×1.5(H)mm
極性Polarity
極性Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
1.05
1.05
2.1
1.050.71.05
極性Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
1.05
1.05
2.1
1.050.71.05
極性Polarity
(4)(3)
(2)(1)
A A'(0.41)
(0.41)
(0.05)
3.33.3
A-A' 断面図Section A-A'
1.5(0.24)
(0.25) (0.25)
4-R0.4
はんだ付け電極Soldering terminal
(1.05) (1.05)(0.7)
(4) (3)
(2) (1) (0.65)
(0.65)
CL-690S-WQ
(1)(2)
(3)(4)
(0.25) (0.25)
4-R0.4
はんだ付け電極Soldering terminal
(1.05) (1.05)(0.7)
(1) (2)
(3) (4) (0.65)
(0.65)
0.1
0.1
A A'(0.41)
(0.41)
(0.05)
3.3
3.3
A-A' 断面図Section A-A'
1.5(0.24)
CL-690S-2WQ
A A'(0.41)
(0.41)
(0.05)
3.3
(0.1)
3.3
A-A' 断面図Section A-A'
1.5(0.24)
(0.25) (0.25)
4-R0.4
はんだ付け電極Soldering terminal
(1.05) (1.05)(0.7)
(1) (2)
(3) (4)
(0.1)
CL-690S-3WQ
(1)
(2)(3)(4)
(0.65)
(0.65)
0.1
0.1
カソードマーク Cathode mark 極性マーク Polarity mark(0.25) (0.25)
4-R0.4
はんだ付け電極Soldering terminal
(1.05) (1.05)(0.7)
(1) (2)
(3) (4) (0.65)
(0.65)
0.1
0.1
A A'
(0.05)
3.3
3.3
A-A' 断面図Section A-A'
1.5(0.24)
CL-690S-2BW01-SD
(2)(3)
(1)
(4)
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
1.05
1.05
2.1
1.050.71.05
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
1.05
1.05
2.1
1.050.71.05
1ピンマーク1pin mark
樹脂Resin
5 1.5
5
(1)(2) (3)(4)
(1) (2)(3) (4)
(5) (6)(7) (8)
3.5
1.25
0.475 0.45 0.475
R0.481.25 0.550.55
(5)(5) (6)(6) (7)(7) (8)(8)
0.75
0.75
はんだ付け電極Soldering terminal
1 10.45 0.455.85
0.451.251.25
1.05
3.75
1.055.85
CL-597S Series特徴 Features
上面発光のフラッシュ光源用LEDFlash LED of upward-lighting
リフレクター付き・高出力タイプReflector equipped/high-powered type
1.
2.
単位 Unit : mm
フラッシュ光源用LED Flash LED
包装数量:4,000個/1リール(φ330mm) Loaded quantity:4,000pcs./1 reel(φ330mm)
包装数量:4,000個/1リール(φ330mm) Loaded quantity:4,000pcs./1 reel(φ330mm)
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r Tech
nical
note
Technical
note
High-sensitivity Optical Sensor高感度光センサー
Features
1.全製品ともSMD(表面実装デバイス)タイプ。高い装着率が得られるチップマウンターによる自動マウントが可能
2.超小型、高性能を実現3.リフローはんだ付けが可能4.鉛フリー、RoHS指令に対応5.バルク納品やテーピング納品をはじめ、基板にアッセンブリしたユニットでの納品にも対応
特徴
Product Nomenclature製品コードの見方
Note: "Series" and "Luminescent color" may have different number of digits.
(注) 「シリーズ名」「発光色」は、桁数が異なることがあります。
(例)赤外チップLED (E.g.) Infrared chip LED
CL - 670IR製品共通番号Product common number
シリーズ名Series
230:上下面実装可能型Top and bottom faces mountable type
290:側面実装型Side face mountable type
PR - 30製品共通番号Product common number
シリーズ名Series
(例)チップフォトトランジスタ (E.g.) Chip Photo-transistor
CPT - 230製品共通番号Product common number
シリーズ名Series
使用素子Element to be used
樹脂色Resin color
納入形態Delivery style
S:シングルSingle
V:赤外カット樹脂Infrared cut resin
無記入:バルクNo coded: Bulk packing
TU:上面テーピングTop face taping
TS:側面テーピングSide face taping
TD:下面テーピングBottom face taping
C:可視光カット樹脂Visible light cut resin
X:透明Transparent
(例)フォトリフレクタ (E.g.) Photo-reflector
The products are delivered taped. Taping specifications differ depending on the product. (For more information, please ask for the specification sheets.)
Delivery納入形態
製品はテーピングして納入します。テーピング仕様は製品によって異なります(詳細は、個別仕様書をご請求の上、確認してください)。
Technical note
41
1.
2.3.4.5.
All products are SMD (Surface Mount Device). Auto-mount is enabled by a chip mounter which provides a high attachment rate.Ultra-compactness and high performance are achieved.Reflow soldering is available.Lead free, compliant with RoHS directiveBulk, taped and even delivery of a unit assembled on a substrate are supported.
S
樹脂色Resin color
C:着色(標準品) Coloration (standard product)
X:透明Transparent
納入形態Delivery style
T:テーピングTaping
無記入:バルクNo coded: Bulk packing
樹脂色Resin color
C:着色(標準品) Coloration (standard product)
X:透明Transparent
納入形態Delivery style
T:テーピングTaping
無記入:バルクNo coded: Bulk packing
- -
- -
- -
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
42
Mounting the CPT-230 on the rear face
1.チップマウンターは画像認識装置を装備したものを使用し、基板穴に対して±0.15mm以内の装置精度でマウントしてください。
2.実装するプリント基板の位置認識は、パターンではなく、穴で行ってください。
3.マウントする際に製品にかかる荷重は、300g以下で管理してください。
1.はんだペーストは、下記仕様のものを推奨します。 溶融温度:216~220℃
成 分:96.5Sn、3Ag、0.5Cu2.リフローは、樹脂上面温度が下図の温度プロファイルになるような条件設定で行ってください(個別製品の対応については、当社へ事前にご相談いただくことをお奨めします) 。
3.リフロー後の取り扱いは、製品が常温に戻ってから行ってください。
マウント
Recommended solderingはんだ付け推奨条件
Moisture-proof packaging uses an aluminum bag including a desiccant (silica gel) to protect the product from moisture during shipment and storage. Be aware that the silica gel changing from green to pink is due to moisture absorption.
輸送中および保管中に製品を湿気から守るため、中に乾燥剤(シリカゲル)を入れたアルミパックで防湿包装を行っています。シリカゲルがグリーンからピンクに変色すると、吸湿が進んだしるしなのでご注意ください。
乾燥剤 Desiccant
リール Reel
ポリチャック Polyester zip fastener
アルミパック Envelopeラベル Label
[防湿梱包]Moisture-proof packaging
[鉛フリーリフローはんだ] Lead-free reflow soldering
1.はんだは、96.5Sn、3Ag、0.5Cuはんだを推奨します。2.手はんだでは樹脂部が吸湿によりクラックを起こすことがありますので、その都度使用前にベーキングを行ってください
3.はんだゴテは25W以下のものを用い、コテ先温度は350℃以下でご使用ください。
4.はんだ付けの際には樹脂部に外力を加えないでください。5.はんだ付けは各ランドとも3秒以内で行ってください。6.はんだ付け後の取り扱いは、製品が常温に戻ってから行ってください。
[手はんだ] Manual soldering
推奨「鉛フリーリフローはんだ付けプロファイル」
(CPT-230を裏面実装する場合)
時間
温度
Time
Temperature
160-180̊C260̊C max.
220̊C
4̊C/sec.max.
4̊C/sec.max.
140秒 60~70秒140 Sec. 60~70 Sec.
Recommendable "profile for lead-free reflow soldering"
Technical
note
Technical
note
1.
2.
3.
A chip mounter with an image recognition device equipped should be used, and the mounting precision should be within ±0.15 mm with respect to the board hole.The position recognition of the PCB to be mounted should be performed by the hole, not the pattern.The load applied to a product at mounting should be 300 g or less.
1.
2.
3.
The following solder paste is recommended: Melting temperature: 216 to 220°C Components: Sn 96.5%, Ag 3%, Cu 0.5%Perform reflow soldering with the settings so that the top face temperature of the resin matches the temperature profile in the diagram below. (We recommend consulting us in advance concerning individual products.)For handling after soldering, wait until the product temperature returns to normal.
1.2.
3.
4.5.6.
A solder paste with Sn 96.5%, Ag 3% and Cu 0.5% is recommended.For handling PCBs with manual soldering, bake the PCBs every time before use to prevent them from cracking, which is caused by the hygroscopic property of the resin.Use a soldering iron of 25 W or less, and keep the temperature of the soldering iron tip at 350°C or less.At soldering, do not apply any external force to the resin portion.Perform soldering within 3 seconds for each round.For handling after soldering, wait until the temperature of the product returns to normal.
梱包仕様 Packing
For details of other than the above, please inquire for each specification sheet.
*上記以外の詳細については、個別仕様書をご請求の上、確認してください。
0.25
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
43
単位 Unit : mm
●外形寸法図 Outline drawing
(Top view)
推奨はんだ付けパターンRecommendable soldering pattern
極性Polarity
●絶対最大定格 Absolute Maximum Rating
1.2
1.2
0.9
1.2
2.0(L)× 1.25(W)×1.1(H)mm
Item Symbol MIN TYP MAX UnitConditions
順電圧 Forward voltage
逆電流 Reverse current
端子間容量 Capacitance between terminals
応答時間 Response time
放射強度 Radiant intensity
ピーク発光波長 Peak wave length
スペクトル半値幅 Spectrum width of half value
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VF
IR
Ct
Tr,Tf
Ie
λp
Δλ
IF=20mA
VR=5V
V=0V f=1MHz
IF=20mA
IF=20mA
IF=20mA
IF=20mA
1.2
13
2
0.6
950
45
1.6
100
V
μA
pF
μS
mW/sr
nm
nm
Item Symbol UnitRating
許容損失 Power dissipation
順電流 Forward current
パルス順電流 Pulse forward current
逆電圧 Reverse voltage
動作温度範囲 Operating temperature range
保存温度範囲 Storage temperature range
(Ta 25℃)
Pd
IF
IFP
VR
TOP
TST
80
50
1*
5
-25~+80
-30~+85
mW
mA
A
V
℃
℃
* Duty比 1%以下 f=1KHz * Duty ratio≦1% Frequency=1KHz
基板PCB
1.10.5
1.25
(0.625)
(1.4)
(1.25)
2.0
1.2
(0.3)
(0.4)
はんだ付け電極Soldering terminal
樹脂Resin
0.4
LED素子LED die
カソードマークCathode mark
特徴 Features
赤外光発光素子を内蔵I n f r a red l i gh t em i t t i ng e l ement embedded
1. 超小型Ultra-compact type
2.
CL-170IR-X Series赤外チップLED Infrared chip LED
Technical
note
Technical
note
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
44
2.2(L)× 1.45(W)×1.1(H)mm
3.2(L)× 1.6(W)×1.1(H)mm
●外形寸法図 Outline drawing
極性 Polarity
●絶対最大定格 Absolute Maximum RatingItem Symbol UnitRating
コレクタ・エミッタ間電圧 Voltage between collecter & emitter
エミッタ・コレクタ間電圧 Voltage between emitter & collector
コレクタ電流 Collector current
コレクタ損失 Collector dissipation
動作温度範囲 Operating temperature range
保存温度範囲 Storage temperature range
(Ta 25℃)
VCEOVECOICPCTOPTST
2552075
-25~+80-30~+85
VVmAmW℃℃
(0.5)
0.52.2
素子位置Position of die
(0.5)1.6
(1.7) 3.2
はんだ付け電極Soldering terminal
樹脂Resin
基板PCB
0.281.1
(1.4)
(0.9)
C
E
エミッタマークEmitter mark
エミッタマークEmitter mark
●外形寸法図 Outline drawing
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
C
E
樹脂Resin
(0.55) 1.0
1.1 1.45
0.3
(1.4)
(0.3)1.6
2.2 基板
PCB
エミッタマークEmitter mark
素子中心Position of die
0.3
はんだ付け電極Soldering terminal
特徴 Features
上下面実装が可能Top and bottom faces mountableCPT-230 Series
チップフォトトランジスタ Chip photo-transistor
CPT-290 Seriesチップフォトトランジスタ Chip photo-transistor 特徴 Features
側面方向の受光が可能な側面実装タイプSide face mountab le t ype, s ide direction light receivable
単位 Unit : mm
単位 Unit : mm
Technical
note
Technical
note
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
1.5
1.5
2.0
1.5
1.6
1.5
2.1
1.5
2.3
上付け実装For upward mounting
下付け実装For downward mounting
穴 Hole
1.2
1.4
1.1
1.4
33445584110100
0.4
1827364569
Item Symbol MIN TYP MAX UnitConditions
光電流 Light current
暗電流 Collector dark current
コレクタ・エミッタ間飽和電圧Saturated voltage between collector & emitter
ピーク感度波長 Peak sensitive wave length
分光感度 Spectral efficiency
応答時間Response Time
半値角 Spectral width of half value
立上がり Rise time
立下がり Fall time
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
IC
ICEO
VCE(Sat)
λp*2
λ*2
TrTfθ1/2
VCE=5VEv=0.1mW/cm2*1
VCE=5V
IC=100μAEv=0.1mW/cm2
VCE=5V IC=2mARL=100Ω
5
0.15
820450~1,050
66±75
μA
nA
V
nmnmμSECμSEC
*1 EV=950nm lR光による放射照度/*2 Xタイプ標準 *1 EV=Infrared irradiance at 950 nm/*2 Standard for X type
Rank ARank BRank CRank DRank E
●絶対最大定格 Absolute Maximum RatingItem Symbol UnitRating
コレクタ・エミッタ間電圧 Voltage between collecter & emitter
エミッタ・コレクタ間電圧 Voltage between emitter & collector
コレクタ電流 Collector current
コレクタ損失 Collector dissipation
動作温度範囲 Operating temperature range
保存温度範囲 Storage temperature range
(Ta 25℃)
VCEOVECOICPCTOPTST
2542075
-25~+80-30~+85
VVmAmW℃℃
88115150197100
0.4
557294123
Item Symbol MIN TYP MAX UnitConditions
光電流 Light current
暗電流 Collector dark current
コレクタ・エミッタ間飽和電圧Saturated voltage between collector & emitter
ピーク感度波長 Peak sensitive wave length
分光感度 Spectral efficiency
応答時間Response Time
半値角 Spectral width of half value
立上がり Rise time
立下がり Fall time
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
IC
ICEO
VCE(Sat)
λp*2
λ*2
TrTfθ1/2
VCE=5VEv=0.1mW/cm2*1
VCE=5V
IC=100μAEv=0.1mW/cm2
VCE=5V IC=5mARL=100Ω
5
0.15
940860~1,090
3.24.8±75
μA
nA
V
nmnmμSECμSEC
*1 EV=950nm lR光による放射照度/*2 Cタイプ標準 *1 EV=Infrared irradiance at 950 nm/*2 Standard for C type
Rank ARank BRank CRank D
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
45
2.18(L)× 1.9(W)×0.75(H)mm
1.5(L)× 1.375(W)×0.6(H)mm
●外形寸法図 Outline drawing
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
105165280
Rank BRank CRank D
1.1
940
2530
1.310
0.11953105151
●絶対最大定格 Absolute Maximum Rating
Item Symbol MIN TYP MAXConditions
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VFIR λpICEO
IC
ILEAKTrTf
順電圧 Forward voltage逆電流 Reverse currentピーク発光波長 Peak wave length暗電流 Collector dark current
光電流 Light current
もれ電流 Leakage current立上がり時間 Rise time立下がり時間 Fall time
IF=4mAVR=6VIF=20mAVCE=10V
VCE=2VIF=4mAd=1mmVCE=2V IF=4mAVCE=2V IC=100μARL=1KΩ
Item Symbol Rating許容損失 Power dissipation順電流 Forward currentパルス順電流 Pulse forward current*
逆電圧 Reverse voltageコレクタ損失 Collector dissipationコレクタ電流 Collector currentコレクターエミッタ間電圧 Voltage between collector and emitterエミッターコレクタ間電圧 Voltage between emitter and collector
全許容損失 Total power dissipation動作温度 Operating temperature range保存温度 Storage temperature range
Input
Output
(Ta 25℃)
PdIFIFPVRPCICVCEOVECOPTopTst
32.52510067520184100
-30~+80-40~+85
(mW)(mA)(mA)(V)
(mW)(mA)(V)(V)
(mW)(℃)(℃)
* Duty: 1/100, Pulse width: 0.1msec* Duty: 1/100 、パルス幅0.1msec
Coupling Characteristics
(V)(μA)(nm)(μA)
(μA)
(μA)(μsec)(μsec)
Input
Output
結合特性
105165280
Rank BRank CRank D
1.14
940
2530
(1.35)10
0.11953155151
●絶対最大定格 Absolute Maximum Rating
Item Symbol MIN TYP MAXConditions
●電気的光学的特性 Electrical and Optical Characteristics (Ta 25℃)
VFIR λpICEO
IC
ILEAKTrTf
順電圧 Forward voltage逆電流 Reverse currentピーク発光波長 Peak wave length暗電流 Collector dark current
光電流 Light current
もれ電流 Leakage current立上がり時間 Rise time立下がり時間 Fall time
IF=4mAVR=6VIF=20mAVCE=10V
VCE=2VIF=4mAd=1mmVCE=2V IF=4mAVCE=2V IC=100μARL=1KΩ
Item Symbol Rating許容損失 Power dissipation順電流 Forward currentパルス順電流 Pulse forward current*
逆電圧 Reverse voltageコレクタ損失 Collector dissipationコレクタ電流 Collector currentコレクターエミッタ間電圧 Voltage between collector and emitterエミッターコレクタ間電圧 Voltage between emitter and collector
全許容損失 Total power dissipation動作温度 Operating temperature range保存温度 Storage temperature range
Input
Output
(Ta 25℃)
PdIFIFPVRPCICVCEOVECOPTopTst
32.52510067520184100
-30~+80-40~+85
(mW)(mA)(mA)(V)
(mW)(mA)(V)(V)
(mW)(℃)(℃)
* Duty: 1/100, Pulse width: 0.1msec* Duty: 1/100 、パルス幅0.1msec
Coupling Characteristics
(V)(μA)(nm)(μA)
(μA)
(μA)(μsec)(μsec)
Input
Output
結合特性
1.05
0.425
(0.425)
1.9
(0.6)
(1.6)
(0.135)
(0.45)
0.65
(0.93)(0.65)
0.475 0.4751.23
0.75
(0.24)
(1.13)
2.18
(0.455)
① ③
② ④
① ③
② ④
受光素子中心Center of photo translstor
発光素子中心Center of LED die
基板PCB
はんだ付け電極Soldering terminal
0.75 0.48 0.75
0.80.85
0.85
●外形寸法図 Outline drawing
極性 Polarity
推奨はんだ付けパターンRecommendable soldering pattern
(Top view)
0.4
0.4
1.375
(0.415)
(0.06)(1.255)
(0.425)
(0.43)(0.75)
(0.1) (0.1)(0.5) (0.5)(0.3)
0.6
(0.25)
1.5
(0.825) (0.27)
カソードマークCathode mark
(0.1)
(0.1)
(0.375)
基板PCB
受光素子中心Center of photo translstor
発光素子中心Center of LED die① ③
② ④
0.5 0.3 0.5
0.3750.6
0.6
① ③
② ④
はんだ付け電極Soldering terminal
PR-30フォトリフレクタ Photo-reflector
PR-40フォトリフレクタ Photo-reflector 特徴 Features
超小型・薄型Ultra-compact/thin type
検出距離が1mmであり、高精度な位置検出が可能1 mm of detection distance, position detectable at high-precision level
可視光カット樹脂の採用により、外乱光による誤動作を防止Thanks to introduction of visible light cut resin, malfunction caused by disturbance light prevented
1.
2.
3.
特徴 Features
超小型・薄型Ultra-compact/thin type
検出距離が1mmであり、高精度な位置検出が可能1 mm of detection distance, position detectable at high-precision level
可視光カット樹脂の採用により、外乱光による誤動作を防止Thanks to introduction of visible light cut resin, malfunction caused by disturbance light prevented
1.
2.
3.
単位 Unit : mm
単位 Unit : mm
Technical
note
Technical
note
包装数量:3,000個/1リール(φ180mm) Loaded quantity:3,000pcs./1 reel(φ180mm)
包装数量:5,000個/1リール(φ180mm) Loaded quantity:5,000pcs./1 reel(φ180mm)
Introduction
Multi-color LED
General co
lor
LED
Flash
LED
Infrared
chip LED
Photo-reflector
ASSEMBLIES
CITILE
DHigh brightnesswhite LED
OPICAL
SENSOR
Chip photo-
transisto
r
46
1.LEDからユニットまでの一貫した製品開発2.高輝度、高品位、長寿命3.異形、曲面等のフリーフォーム化に対応
Assembly productsアッセンブリ製品
Features
1. Integrated product development from LEDs to unit.2. High brightness, high quality and long service life.3. Free forms available such as variously-shaped and curved surface.
特徴
Backlight unit integrating optical design and precision processing technologies.
光学設計、精密加工技術が融合したバックライトユニット
液晶バックライトユニットLCD Backlight Unit
超薄型・円形小型 Ultra-thin, round, and compact type
車載用(7インチ) On-vehicle type (7 in.)
車載用(12インチ) On-vehicle type (12 in.)車載用(12インチ) On-vehicle type (12 in.)
Technical
note
Technical
note
Ref.CE-P3276 07/15
Ⓒ2017 CITIZEN ELECTRONICS CO., LTD.
CITIZENはシチズン時計株式会社の登録商標です。 CITIZEN is a registered trademark of Citizen Watch Co., Ltd. Japan.
CITILEDとCITILIGHTはシチズン電子株式会社の商標または登録商標です。CITILED and CITILIGHT are trademarks or registered trademarks of Citizen ElectronicsCo., Ltd. Japan.
販売代理店 Agent
[営業部 Sales Division]
■C-E(HONG KONG)LTD.Unit 718, 7/F., Chevalier Commercial Centre, 8 Wang Hoi Road, Kowloon Bay, Kowloon, Hong KongTel.〈852〉2793-0613 Fax.〈852〉2344-4916Website http://cehk.citizen.co.jp
■CECOL, INC.1515 E. Woodfield Road, Suite 748, Schaumburg, IL 60173 U.S.A.Tel.〈1〉847-619-6700 Fax.〈1〉847-619-6708Website http://www.cecol.com
■CECOL, INC.(San Jose Office)4010 Moorpark Ave Suite 207, San Jose, CA 95117 U.S.A.Tel.〈1〉408-899-2961
■C-E(DEUTSCHLAND)GMBH.Stephanstrasse 3, 60313 Frankfurt am Main, GermanyTel.〈49〉69-2992-480 Fax.〈49〉69-2097-6935Website http://cede.citizen.co.jp
1-23-1, Kamikurechi, Fujiyoshida-shi, Yamanashi, 403-0001, JAPANTel.〈81〉555-23-4121 Fax.〈81〉555-24-2426
〒403-0001 山梨県富士吉田市上暮地1-23-1Tel.0555-23-4121 Fax.0555-24-2426
■西鉄城電子貿易(上海)有限公司CITIZEN ELECTRONICS(CHINA)CO., LTD.Room 2710, 27F New Town Center Building, 83 Loushanguan Road, Changning District, Shanghai, ChinaTel.〈86〉21-6295-5510 Fax.〈86〉21-6295-5570Website http://cesh.citizen.co.jp
■西鉄城電子貿易(上海)有限公司 北京事務所CITIZEN ELECTRONICS(CHINA)CO., LTD. BeiJing Branch OfficeA-Tower 215 Room of Jiuxian Condominium.No.2 Jiuxianqiao Road Chaoyang District, Beijing, ChinaTel.〈86〉10-6431-5600
■西鉄城電子貿易(上海)有限公司 深圳分公司CITIZEN ELECTRONICS(CHINA)CO., LTD. Shenzhen OfficeRoom 2910, 29/F, Tower C, Xintian Business Centre,No.125 Street, Shixia North, Futian District, Shenzhen, ChinaTel.〈86〉755-3293-0988
[販売拠点 Sales Network]
http://ce.citizen.co.jpWebsite
■東京オフィス〒141-0031 東京都品川区西五反田1-23-9Tel.03-3493-2081 Fax.03-5436-7921(国内担当)Tel.03-3493-2716 Fax.03-5436-7927(海外担当)
TOKYO SALES OFFICE1-23-9, Nishigotanda, Shinagawa-ku, Tokyo, 141-0031, JapanTel.〈81〉3-3493-2081 Fax.〈81〉3-5436-7921(Domestic Sales)Tel.〈81〉3-3493-2716 Fax.〈81〉3-5436-7927(Overseas Sales)
■関西営業所〒532-0011 大阪府大阪市淀川区西中島5-14-5Tel.06-6886-2402 Fax.06-6886-2403
KANSAI SALES OFFICE5-14-5, Nishinakajima, Yodogawa-ku, Osaka, 532-0011, JapanTel.〈81〉6-6886-2402 Fax.〈81〉6-6886-2403
スマートフォンでもご覧いただけますAccessible by smart phone.