Circular Economy related international practices and...
-
Upload
nguyenthien -
Category
Documents
-
view
220 -
download
1
Transcript of Circular Economy related international practices and...
Circular Economy related
international practices
and policy trends:
Current situation and practices on
sustainable production and consumption
and international Circular Economy
development policy summary and analysis
Prof. Dr. Peter Heck
IfaS
Environmental Campus Birkenfeld
20.2.2006
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 2
Table of Contents
1 Introduction on Circular Economy and Methodology............4
1.1 The need for new resource system policy: Examples from the
European Commission...................................................................... 7
1.2 Facts and background information ................................................ 11
1.3 Material Flow Accounting (MFA) and
Total Material Requirement (TMR).................................................. 14
2 Country studies ......................................................................19
2.1 Germany.............................................................................................. 19
2.1.1 History of German Environmental Protection policy ..........................19
2.1.2 Sustainable development......................................................................21
2.1.3 Waste management – steps towards a recycling economy................31
2.2 Japan................................................................................................. 38
2.2.1 Sustainable Development in Japan ......................................................39
2.2.2 Energy in Japan.....................................................................................42
2.2.3 Establishing a sound Material-Cycle Society ......................................49
2.2.4 Today situation of waste management in Japan .................................52
2.2.5 Changing consumption pattern............................................................57
2.2.6 Integrated environment and development in decision making ..........62
2.3 Netherlands ...................................................................................... 66
2.3.1 Situation of the environment .................................................................66
2.3.2 Material Flow policy in the Netherlands................................................68
2.4 USA.................................................................................................... 70
2.4.1 Waste Management ................................................................................71
2.5 European Union................................................................................ 83
2.5.1 Sustainable use and management of natural resources
and the Lisbon Process ............................................................................85
2.5.2 Options for a resource policy ................................................................91
2.5.3 Recommendation of the Council on Material Flows and Resource
productivity towards the European Policy Committee (EPOC)..............93
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 3
3 International circular economy development policy summary
and analysis .................................................................................95
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 4
1 Introduction on Circular Economy and Methodology
Circular Economy (CE) alludes to the ecological cycles of nature, which have existed for bil-
lions of years with a constant stock of matter and influx of sun energy. In this natural econ-
omy waste does not exist. All matter is recycled with the help of sun energy as the needed
additional energy source for 100% recycling. With the increase of man made waste and the
degradation of renewable and non-renewable resources, there is a growing concern that the
principles of nature will sooner or later catch up with us.1
More practically explained Circular Economy means reducing resource use and reducing the
load on our natural sinks. The CE concept is central part of the ecological economy and the
industrial ecology. Industrial ecology as well as Ecological Economy are interdisciplinary dis-
ciplines with involvement from economists, engineers and natural scientists. Internationally
the basic idea of Circular Economy is very popular in China. In practical issues some Euro-
pean Countries like the Netherlands, Germany, Austria and Japan have developed strate-
gies, which can be related to certain king to CE approaches.
It is of crucial importance to include the energy question into all material flow considerations.
As mentioned in the first lines of this report a 100 % recycling in the natural system only is
possible in a sustainable way because of the constant influx of solar energy into the system.
In order to copy from the nature human societies must establish recycling systems by taking
the energy question into account. For example we will have a closer look at the waste man-
agement system of different developed countries. Many of them still consider composting to
be part of a good material recycling. But as a matter of fact, composting means “getting rid of
useful renewable energy by wasting fossil energy as Figure 1 clearly shows. Composting
needs energy input whereas fermentation generates about 70 to 140 litter oil equivalent per
ton of biomass input.
1 ECON: Circular Economy – An interpretation, Oslo 2004
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 5
Figure 1: Comparison between composting and fermentation
Source: own compilation
Another example comes from the agricultural field. With his invention of artificial fertilizer
Justus Liebig proved that scientific and technological progress and fossil energy could help
to expand to a certain degree the limits of nature. The introduction of artificial fertilizer in-
creased considerably harvests and made it possible to nourish the rapidly expanding popula-
tion of Europe during the early industrialization. Only by using an enormous amount of fossil
fuel to generate fertilizer we are able to provide enough food for a growing world population.
But can a CE conception work with an agriculture based on fossil non-renewable and limited
energy source? Same aspects in the field of agriculture could be discussed with reference to
water supply. Aside from energy this already is and much more will be the next crucial and
limiting factor to growth and well-being. Circular Economy must consider the water question
also!
Talking about Circular Economy therefore means considering more than just waste man-
agement. In any case we also have to consider agriculture, water, soil, biodiversity etc. But
the most important area is energy. A resource efficient society only can be established by in-
troducing a sustainable energy supply alongside the resource and environmental protection
strategy.
The reports about worldwide status of Circular Economy therefore are misleading. Techni-
cally spoken a 100% recycling society is possible no matter to what extend we include eco
design and avoidance or sufficiency strategies. But energetically seen many recycling tech-
nologies or processes are not possible in the framework of a Sustainable Development. En-
ergy thus becomes the key issue in developing Circular Economy societies or Sustainable
Development societies.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 6
Unfortunately only few countries so far are working on holistic, systemic, and interdisciplinary
approaches for Circular Economy. China though being the frontrunner in using the term of
CE risks to be reused to a kind of resource or waste management conception.
Maybe most promising so far seem to be the Sustainable Development strategies of Ger-
many or the Netherlands.
Within the discussion about a Circular Economy strategy Germany often is called a forerun-
ner to Circular Economy. This is mainly because of the far reaching “Closed Substance Cy-
cle and Waste Management Act” which entered into force in 1996. Though this waste man-
agement law certainly is a milestone within a broad Circular Economy strategy Germany
rather aims at a sustainable society. A sustainable society emphasizes besides technical as-
pects mainly on social and economic aspects. Nature capital plays a key role in Sustainable
Development strategies. Resources must be preserved so that future generations may have
the same chances for living and development than the today generations. And according to
the Rio and Johannesburg declarations Sustainable Development is closely linked to interna-
tional responsibility for poverty alleviation and fair access for all human beings to the world
resources.
The term Circular Economy often is misunderstood as a kind of recycling society. But a recy-
cling society only can become a Circular Economy if the energy question is taken into ac-
count. Aside from resources and waste problems the sustainable availability of energy is the
key issue for a Circular Economy. Therefore every state claiming to achieve a Circular Econ-
omy must develop a strategy for sustainable energy supply. Energy saving and renewable
energy technologies thus become a key issue of Circular Economy societies.
Another key issue of Circular Economy is land management and soil protection. In the total
material requirement analysis of the European Commission land use and soil use is a key
point of concern. Therefore for all countries aiming at Circular Economy the land and soil
question are additional crucial aspects of concern. For example in Germany only 3.6% of
primary energy supply is renewable and every day at least 60ha nature land is turned into
streets, houses or other infrastructure buildings. Though these figures are not promising
Germany among the OECD countries already is a frontrunner for the idea of Circular Econ-
omy.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 7
1.1 The need for new resource system policy: Examples from the European
Commission
Speaking at a press conference following the ECOFIN meeting in Luxembourg on June 2
2004 the Irish Minister for Finance Charlie McCreevy pointed out that "in line with the initia-
tive of the G8, Finance Ministers called on oil producers to provide adequate supplies so that
oil prices would remain consistent with stable, sustained growth in the world economy.” The
joint activities of G8 and EU show the connection between economic development and sup-
ply with natural resources which was already stressed in the European Commission’s com-
munication on the follow-up to the Lisbon Strategy: “Sustainable growth requires that eco-
nomic growth contributes to social progress and respects the environment, that social policy
shore up economic performance and that environmental policy makes economic sense.” Al-
though the connection between economic development and use of natural resources
seem to become acknowledged there is yet no Community strategy for the sustainable
use and management of natural resources. Reactions to acute scarcities in resource sup-
ply therefore often result in spontaneous and uncoordinated activities of the member states.
For example, scarcities in crude oil supply have resulted in unilateral decreases of fuel taxa-
tion leading to distortions in the Single Market. This is also a risk during the current oil crisis,
but also during previous shortages e.g. in September 2000 when oil prices lead to consider-
able pressure on national governments.
European governments have repeatedly experienced shortages in oil supply causing eco-
nomic risks and protest in society. There is a likely rise in the probability of these experiences
because supply with non-renewable natural resources will become more and more problem-
atic with growing demand primarily from developing societies. A land-marking publication
was the study “Limits to Growth” by Donnelly and Denis Meadows, which was issued in 1972
by the Club of Rome. Since then, prices and public attention has more or less oscillated on a
high level although it turned out that the implications of resource use are much more prob-
lematic than any scarcity of resources. In 1989 Robert U. Ayres drew attention to the “indus-
trial metabolism” asking for a more systematic approach to material use. A former senior
economist of the World Bank, Herman Daly, proposed 1992 a steady state economy as an-
swer to the physical limits of economic growth. Others followed and managed to measure the
resource dependency from the economic macro down to the micro level.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 8
Most recently Lester Brown from the Worldwatch Institute pointed out the need for a new
Eco Economy with a special designed New Materials Economy.2 In fact, many historical de-
velopments are connected to physical prerequisites of human development. The settlement
of major civilizations along rivers, the rise and fall of the Polynesians, the industrialization of
coal mining regions and the Gulf wars of our times have a physical background determined
by the exploitation of natural resources. Even the foundations of the European Union can be
traced back to an institution for the joint management of natural resources: The European
Community for Coal and Steel.
Motivations for Sustainable Use and Management of Natural Resources
Sustainable use and management of natural resources is motivated by:
I.) The geo-strategic function of natural resources
II.) Environmental pressure caused by the consumption of natural resources
I.) Geo-strategic
The geo-strategic motive is connected to the biological and technological necessity to use
natural resources. Access to water, for example, is a limiting factor in the Middle East and
other arid and semi-arid regions, determining the survival and further development of socie-
ties. Oil is a limiting factor in the development of any industrialized nation. Natural resources
have therefore a strategic function. Scarcity is therefore an issue with important implications
for security and economic development. Those societies, which manage to control strategic
resources, can control the fate of their own and other nations. The EU strategy for the use
and management of natural resources will therefore have repercussions on the relation to
other developed and developing nations. The EU may defend or even increase the high level
of consumption against the interests of nations that want to acquire similar living standards or
there could be a “Global Deal” to reconcile fair shares of the earth’s “environmental space”
among all Nations.3
To ensure the supply of strategic resources Europe has different options:
1. Military interventions to guarantee resource access
2. Trade with resources exporting countries and influence on the terms of trade
2 Brown, Lester R.: Eco Economy. Buidling an Economy for the Earth, London 2001 3 See Hille 1998, Carley/Spapens 1998
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 9
3. Improving resource-productivity to achieve independence from resource exporting
countries
4. Improving domestic production of natural resources or substitution (e.g. by a shift to
renewables).
Since there is yet no official policy for the sustainable use and management of natural re-
sources, it cannot be said to which extent these options become relevant for Europe. Never-
theless, it can be said that:
- Option 1 increases the risk of international conflicts and hampers global, regional
and national security
- Option 2 as it is currently pursued tends to increase the disparities between richer
countries which use their economic, political and educational advance to secure ac-
cess to cheap resources and the poorer countries which are left with a minimum room
for bargain and need to be content when selling their nature for low value
- Option 3 provides a multiple-win strategy because it combines economic and envi-
ronmental interests with lower risks for international security while allowing to develop
production and consumption patterns with a globally more balanced use of natural re-
sources
- Option 4 can be chosen only to a limited extent due to the limitation of agriculture and
forestry land which although constituting the major share of the EU´s territory will not
allow to provide only a major part of the non-renewable resource supply on a biomass
basis; nevertheless, full potentials for technical renewability, i.e. recycling, are not yet
used completely. Therefore, option 4 can be implemented only together with option 3
and to the extent that the latter has successfully reduced resource demand. There-
fore, the third option, which is dealt with in this paper, will be a “directionally
safe” option with positive effects on European security.
II.) Environmental pressure
Environmental pressures are not only connected to the output but also to the input into an
economy when extracting natural resources for industrial processing. For example, consider-
able destruction of whole landscapes is connected to mining activities. The infrastructure and
the process of transport for further industrial use in Europe exert additional pressure. Such
pressure can partly be traced back to the use of resources; partly it is a more indirect result.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 10
Because every known and unknown environmental impact caused by human activities can
be related to the metabolism of a society, it makes sense to monitor and gradually reduce the
overall consumption of natural resources to a level compatible with the carrying-capacity of
the earth’s ecosystem. This line of reasoning leads consequently to a new industrial
“Leitbild”: 4 Society creates welfare by reducing its resource use. This approach is reflected
in the objective of the 6th Environmental Action Programme of the European Union: The EU
wants to increase its resource efficiency “to bring about more sustainable production and
consumption patterns, thereby decoupling the use of resources and the generation of waste
from the rate of economic growth and aiming to ensure that the consumption of renewable
and non-renewable resources does not exceed the carrying capacity of the environment. 5
This objective needs to be differentiated according to the properties of the different renew-
able and non-renewable natural resources.6 It will also have to take the various impacts into
account. Nevertheless, a strategy of decoupling will have to be based upon general man-
agement rules. While Europe is intending to decouple the use of resources from economic
growth, it cannot expect the developing world to do so, at least not at the same rate. This has
been acknowledged by several documents related to the United Nations discourse on envi-
ronment and development:
� Rio Agenda 21: “Poverty and environmental Degradation are closely interrelated.
While poverty results in certain kinds of environmental stress, the major cause of the
continued deterioration of the global environment is the unsustainable pattern of
consumption and production, particularly in industrialized countries, which is a
matter of grave concern, aggravating poverty and imbalances.” (Chapter 4.3.)
� Rio Agenda 21: “Special attention should be paid to the demand for natural re-
sources generated by unsustainable consumption and to the efficient use of those re-
sources consistent with the goal of minimizing depletion and reducing pollution. Al-
though consumption patterns are very high in certain parts of the world, the basic
consumer needs of a large section of humanity are not being met. This results in ex-
cessive demands and unsustainable lifestyles among the richer segments, which
place immense stress on the environment. The poorer segments, meanwhile, are un-
able to meet food, health care, shelter and educational needs. Changing consumption
4 As for the word leitmotif there is no appropriate English translation for Leitbild. Leitbild means a guiding
vision or image 5 COM (2001) 32 6 See further subreport 4 background study papers on “Fishery”, “Forestry”, “Land”, “Water”, and “Material Flows”
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 11
patterns will require a multipronged strategy focusing on demand, meeting the basic
needs of the poor, and reducing wastage and the use of finite resources in the pro-
duction process.” (chapter 4.5.)
� Johannesburg Plan of Implementation (UNCED 2002): “Encourage and promote
the development of a 10-year framework of programmes in support of regional and
national initiatives to accelerate the shift towards sustainable consumption and pro-
duction to promote social and economic development within the carrying capacity of
ecosystems by addressing and, where appropriate, delinking economic growth and
environmental degradation through improving efficiency and sustainability in the use
of resources and production processes, and reducing resource degradation, pollution
and waste. All countries should take action, with developed countries taking the
lead, taking into account the development needs and capabilities of developing coun-
tries through mobilization, from all sources, of financial and technical assistance and
capacity-building for developing countries.”
The following paragraphs will explain why Europe should take a lead for a sustainable use
and management of natural resources. Such a lead position will give also an incentive to de-
veloping countries to follow. The geo-strategic function and the environmental pressures
caused by the consumption of natural resources lead to a strategic socio-economic re-
sponse.
1.2 Facts and background information
While some countries become richer other countries are economically lagging behind. While
in some countries the numbers of people grow rapidly other countries stagnate with an age-
ing population. These developments determine the metabolism of societies and thus the use
and management of natural resources. While there is sufficient data on the development of
populations and economic performance, the overall consumption of natural resources is only
known for a small but increasing number of countries. The EEA regularly reports on the re-
source use of the EU with material flow indicators.7 For the rest of the world there is only suf-
ficient data on energy consumption. Energy is a key resource. First, it is widely linked to use
of natural resources, i.e. fossil energy carriers. Secondly, the use of fossil energy carriers
leads to major impacts on the environment, in particular in the form of (material) emissions
7 EEA 2000, EEA 2001, EEA 2003
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 12
(CO2, SO2, NOx etc.). Thirdly, the extraction and further use of non-energetic resources (e.g.
steel, cement, etc) also require the use of energy. Because of the material implications of the
energy sector it is possible to draw certain conclusions with regard to the global consumption
of natural resources in general.
Energy supply and the accompanying consumption of natural resources are not evenly dis-
tributed. 1971 about 885 million people were living in the (rich) OECD countries. This rich
quarter of the world’s population consumed around 62% of the world’s energy. At the turn of
the century the absolute number of people living in OECD countries rose by 28%, but their
relative share of the world population decreased to around 19%. Nevertheless, they still con-
sume 54% of the global energy supply. The remaining approximately 80% of the world popu-
lation use the other bare half of the world’s energy supply. In other words, people living in
OECD countries consume four to five times more energy than people living in non-OECD
countries. At the same time, newly industrialized countries catch up and emulate western
styles of industrialization. A combination of factors determines the consumption of natural re-
sources – population, economic affluence, and technology being the most important ones.
Ehrlich/Ehrlich (1990) have linked these factors in a formula defining the ecological impact of
human development on nature.
I = P x A x T
With:
I (impact): global environmental problems such as climate change, loss of biodiversity and
degradation of nature, over-use of natural resources etc.;
P (population): demographic development (global population growth);
A (affluence): per capita welfare in general and per capita economic growth in particular;
T (technology): technological state of the art, particularly the technological relationship be-
tween demographic and economic development on the one hand and impacts on the envi-
ronment on the other hand. The IPAT-formula can be applied to quantify the contribution
of the main determinants driving energy use. It is also useful to discuss options for fu-
ture policies.
The IPAT-formula to the energy consumption in OECD countries and non-OECD countries
shows that two factors, namely population and economic growth are the driving forces be-
hind the increasing energy consumption. In OECD countries economic growth has been the
main contributor, in non-OECD countries population growth. Mainly in the OECD world en-
ergy efficient technological improvements have slowed down the rising demand for energy.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 13
Figure 2 and table 1 show the trend in increase of worldwide energy demand divided by dif-
ferent energy sources.
Figure 2: Forecasts for trends on world energy demand
Source: Agency for Natural Resources and Energy, METI
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 14
Source: Agency for Natural Resources and Energy, METI
Table 2 shows the today situation and the forecast for 2010 for the percentage of renewable
energy supply in the three main economic regions.
Table 2: Renewable energy supply as part of total energy supply
European and the United States
FY 1998 Objective for FY 2010
Japan *4.9% About 7%
America 7.00% 6.90%
EU 5.30% 11.60%
Source: Agency for Natural Resources and Energy, METI
1.3 Material Flow Accounting (MFA) and Total Material Requirement (TMR)
The measurement of flows of materials through the economy is to assess the pressure of
such throughput on the carrying capacity of natural systems. The approach is based on
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 15
thermodynamic laws of conservation and entropy of energy and matter.8 The MFA make use
of these physical laws by applying them to an economic region or political territory like a
country. Economies or societies need influx of material from the environment and abroad.
Those materials leave the economy as exports and residual or industrial outputs of waste
and emissions. During a particular accounting period some material inputs may accumulate
in long lasting fixed assets or inventories. This accumulation can be interpreted as – physi-
cal- growth.9 The MFA assess the Total Material Requirement (TMR) on the input side of ma-
terial flow balances and the Total Domestic Output (TDO) on the output side. The TMR in
particular is to measure the overall environmental pressure from natural resource use by
adding up the inputs of raw materials in tonnes, including hidden flows or ecological back-
packs.10 The purpose of such weighing by weight is to capture all kinds of actual and poten-
tial environmental impacts and welfare effects. For our Circular Economy considerations in
this paper it is of crucial importance to know about the energy and ecosystem side effects of
material flows.
The Total Material Consumption (TMC) of industrialized countries ranges between 31 and 74
t/cap. If the rest of the world population were to acquire similar levels of material consump-
tion in the next 50 years worldwide consumption of resources would lead about 279-666 bil-
lion tons. This would double or even increase earth movement on global land surface by a
factor of 5 (Bringezu et al 2003). This would imply that the known and unknown environ-
mental pressure connected to the consumption of natural resources would rise accordingly. It
cannot be said whether the environmental pressure is coupled to material consumption in a
linear or non-linear way. As a first conservative estimate linear coupling can be assumed.
This would imply that in the next 50 years overall environmental pressure would not de-
crease but rise by a factor 2-5.
Total Material Requirement gives information about the material intensity of societies or
economies. As shown in figures 3a and 3b the TMR per GDP as well as TMR per capita var-
ies greatly between different countries.
8 See Georgescu-Roegen 1979 9 See Bartelmus, 2002
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 16
Figure 3a: Material Intensity of different economies
Source: Sustainable Europe Institute, 2005
Figure 3b: Material inputs per capita
Source: Sustainable Europe Institute, 2005
The total domestic material consumption in the EU is shown in Figure 4 below.
10 Ecological rucksacks are defined as „the sum of all materials which are not physically includes in the economic output under
consideration but which are necessary for production, use, recycling and disposal (Spangenberg, et al 1999). More information
is this topic can be found with the Wuppertal Institute.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 17
Figure 4: Domestic Material Consumption EU 15 1970-2001
Source: Sustainable Europe Institute, 2005
More detailed information about real TMR we can get by including hidden material flows like
erosion and excavation we read from figure 5 below.
Figure 5: Composition of TMR in the EU and selected other states
Figure 6 shows the relation between GDP and TMR by comparing different countries. Re-
markable is the positive trend in the USA but also the worsening situation in Japan, Nether-
lands and Finland. The last three countries being well known for successful environmental
policy strategies.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 18
Figure 6: TMR and GDP of the EU compared with selected member states and other
countries
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 19
2 Country studies
2.1 Germany
2.1.1 History of German Environmental Protection policy
The year 1969 can be labeled as the birthday of a German environmental policy. As shown
above the public opinion could not possibly be named as the driving force for the induction of
a new (environmental) policy. Pehle (1997) gives two main reasons for the start of environ-
mental policy in Germany:
“First of all we have to consider the political situation in Germany at the end of the 60s.
The Free Democratic Party (FDP) saw a good opportunity to use environmental policy as
a new topic to be identified as an innovative reform party. Within the new coalition with
the Social Democratic party this opened a new policy field. Second already in 1968 the
United Nations Educational, Scientific and Cultural Organization (UNESCO) had organ-
ized an international symposium with the title “Man and the Biosphere”, the Council of
Europe had declared 1970 the Year of Nature Conservation and finally the intensive
preparations for the first United Nations Conference on the Environment of Man to be
held in 1972 tipped the balance towards a thorough design of
environmental policy.” 11
The federal government presented an immediate action program in 1970 followed by the first
comprehensive “Environmental program of the federal government” in 1971. Since then the
federal environmental policy followed three guiding principles:
1. Precautionary protection of the environment,
2. Causal responsibility (i.e. polluter pays principle)
3. Co-operation
11 Pehle, 1997, p.161
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 20
The passing of the environmental program was preceded by a reorganization of the federal
government. The Chancellor transferred the department of water industry, air pollution con-
trol and noise abatement, which till than belonged to the Federal Ministry of Health, to the
sphere of responsibility of the Federal ministry of the Interior. In 1972 the basic law was
amended to allow the feral government to become active in areas of environmental policy.
Till 1974 a series of environmental laws like e.g. Waste Disposal Act (1972) or Federal Emis-
sion Control Act (1974), were passed. Institutions like the Council of Experts for Environ-
mental Issues (1971) or the Federal Environmental Agency were founded.
The period from 1974 to 1978 was massively influenced by the oil crisis and the successive
recession in Germany. The early advantages in environmental protection had to be defended
against trade associations and labor unions. Between 1975 and 1978 no new legislative
plans in the field of environmental protection were initiated. The highly motivated government
officials in the Ministry of the Interior could reach barely a keeping of the status quo.
A wide network of citizen’s initiatives and environmental groups characterized the time from
1978 to the end of the 80s. These groups draw support from the dissatisfaction of many
Germans with the laisser faire policy of the German government with regard to environmental
protection. The nuclear accident in Tschernobyl as well the “Waldsterben” pushed many ac-
tivists to new and existing NGO´s as well as to ecological parties. The political result was re-
markable. A new party – The Greens – started to make their way through regional parlia-
ments (1980 Hessen) into the German Bundestag (1983). In 1986 the Federal Ministry of the
Environment, Nature Conservation and Nuclear Safety was established. This is said to be an
immediate reaction to the mal performance of the Ministry of Interior with regard to the
Tschernobyl catastrophe.
The period from 1990 to 1998 was influenced by German reunification. Loads of work also in
the environmental protection field had to be done in East Germany. Enhancing environ-
mental protection on a principal base became a subordinate campaign issue. Nevertheless
crucial aspects like the energy feeding law and the Kyoto protocol were pushed through and
became successful. The dismantling of the former East German industry helped the govern-
ment to reach ambitious Carbondioxid reduction targets. Especially in the waste manage-
ment field, improvements were made by the Closed Substance Cycle and Waste Manage-
ment Act 1996.
Since 1998 the red-green coalition government is struggling hard to boost environmental pro-
tection against an ever more worsening economic environment. Using the slogan ecological
modernization, the topics efficient resource use, sustainable development and renewable
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 21
energies, are put into the focus of environmental policy. At least renewable energies became
a success story of this period.
Figure 7: Development of environmental policy in Germany
Source: Umweltbundesamt: Cleaner Production Germany, Berlin 2002
2.1.2 Sustainable development
According to the Federal Ministry for the Environment, Nature Conservation and Nuclear
Safety, there is a national sustainability strategy with defined indicators. The most important
of these indicators can be seen in table 1,2. The model of sustainable development was first
applied to the environmental sector. In this 30 years of experience could be taken and built
upon. Regarding the tree essential principals of German environmental policy pollution pre-
vention, polluters pay, cooperation principle they are mirrored in the demand of more recent
documents, e.g. the Charta of Aalborg12 and yet important aspects were expanded upon:
- Integration of economic activities, quality of living and protection of resources
- Responsibility of today’s generations for future ones
- Consultation processes within local authorities (Local Agenda 21), as well as between
local authorities (inter-communal cooperation, local development – and –aid-
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 22
cooperation, networks).13
On June 1994 the German parliament called on the government to give all necessary sup-
port to the implementation of the decisions made in Rio de Janeiro. Additionally the parlia-
ment decided to build and strengthen local self-government structures in developing coun-
tries to aid in regional and local self-help and accepted and recognized the “Charta of Berlin”
of the 17. 10. 1992 as the guiding principle for local North-South development.14 Since the
model of Sustainable Development was anchored in the constitution in 1994, it has become
a principle of government policy. In consequence preservation of out natural resources as
the basis for human life is viewed as a cross-sectoral task for governmental action. In
1997/98 Sustainable Development was adopted into the Regional Planning Act and into the
Building Code, and in 2001 into the amendment to the German federal law for nature con-
servation. The presidents of the federal states in Germany confirmed and accepted the con-
sequences arising from the decisions taken in Rio in a bill of 1st December 1994.15 In 2001
the Council for Sustainable Development comprising 17 members from all segments of soci-
ety was established. The Councils task is to advise the Federal Government when formulat-
ing its sustainability strategy and to promote social dialogue surrounding the targets and
measures of Sustainable Development. Germanys Sustainable Development strategy also
includes special nature conservation laws, renewable energy and energy saving regulations
as well environmental information laws. A selection of the most important laws is shown in
Box 1.
Box 1: Important laws and regulations (beside the field of waste management)
- Act on the Prevention of Harmful Effects on the Environment Caused by Air Pollution,
Noise, Vibration, an Similar Phenomena
Federal Immission Control Act (Bundesimmissionsschutzgesetz BimSchG)
It is the purpose of this Act to protect human beings, animals and plants, soil, water, the at-
mosphere as well as cultural assets and other material goods from harmful effects on the envi-
ronment and to take precautions against the emergence of any such harmful effects on the en-
vironment.
12 Charta of European cities on the road to sustainability. Passed on 27th of may 1994 by the delegates at the European confer-
ence on sustainable cities in Aalborg, Denmark 13 FME, 2001, p.9-10 14 FME, 2001 p. 10
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 23
- Act on Granting Priority to Renewable Energy Sources
(Erneuerbare-Energien-Gesetz EEG) Became effective on April 1st 2000 (last amendment
21st July 2004). Main Objective: Increase the percentage of renewable energy sources in
power supply to at least 12.5 % by 2010 and to 20 % by 2020 [long-term objective: 50 per
Cent by 2050] and realize Sustainable Development
Aside from the well-known examples in field of waste management the most Circular Econ-
omy like law can be found in the field of renewable energy. Because of the laws and regula-
tions in this field Germany is constantly increasing its percentage of renewable energy as a
part of total primary energy demand.
The following 2 tables show the targets, which were set by the German government for the
years 2020 and 2050 with regard to energy supply and consumption.
Development of primary energydemand and CO2 emissions in
Germany till 2050
15 Resolution of the German presidents of states on the political consequences arising from the UNCED-Conference in Rio in
1992.
Figure 8:
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 24
Development of electricity supplytill 2050
The overwhelming success of the Renewable Energy law in Germany can be taken from the
following 4 figures (10-14) showing the increase in solar thermal energy, in photovoltaic, in
wind and biomass energy installations.
Figure 9:
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 25
Figure 10 Figure 11
Photovoltaics
Figure 12
Development of installed wind capacityin Germany and the EU till 2003
Figure 13
Development of biogas plants in Germany till
2003
0
500
1000
1500
2000
2500
An
lag
en
an
zah
l B
iog
asan
lag
en
1999 2000 2001 2002 2003 2004 2005
> 500 kWel
70-499 kWel
< 70 kWel
August 2003 ca. 1.700 Biogas plants
Quelle: IE, Monitoringbericht Biomasse, 2003
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 26
Figure 14
Development of wood chip cogeneration plants
Nov. 2003 ca. 80 plants
Quelle: IE, Monitoringbericht Biomasse, 2003 / Berücksichtigung aller in Planung befindlicher Anlagen
Figure 15 below shows the inter linkage between waste policy and energy policy. Through
the Renewable Energy law waste wood more and more is considered to be a resource rather
than waste. The disposal price goes down from 100 € in 1998 to under 20 € in 2003 and for
2005 we expect to have income from offering waste wood to the energy market. This exam-
ple shows hoe higher society payments in one sector can lower costs in another. Only con-
sidered together - waste and energy - it will be clear that for the society this solution is not
more expensive but much more sustainable.
Figure 15: The relationship between waste management and renewable energy sup-
port
Waste wood use for cogeneration
Price development
Quelle: IE, Monitoringbericht Biomasse, 2003
Source: IE Monitoringbericht Biomasse 2003
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 27
Figure 16 shows the energy supply of the Zero Emission Environmental Campus in Birk-
enfeld. Former organic waste is used to supply electricity and heat to 2000 students. In addi-
tion fertilizer is produced from organic household waste. The two key technologies perform-
ing the energy supply in this example are biogas from waste food and greenery residues and
waste wood chip cogeneration. This example shows how Circular Economy on a micro level
works or could work!
Figure 16: Zero Emission Campus
Projects like Zero Emission Campus only became possible because of the new German En-
ergy Feeding Law. Box 2 gives details on the Renewable Energy Law.
Source: own compilation
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 28
Box 2: Act on Granting Priority to Renewable Energy Sources
Renewable Energy Law, (Erneuerbare-Energien-Gesetz EEG), became effective on April 1st
2000 (last amendment 21st July 2004).
Purpose
• Facilitate a Sustainable Development of energy supply for the sake of
protecting the climate, the nature and the environment
• Reduce costs of energy supply in national economy
• Avoiding conflicts over fossil fuels
• Promote further development of technologies for the generation of
electricity from renewable energy sources
Main Objective
• Increase the percentage of renewable energy sources in power
supply to at least 12.5 % by 2010 and to 20 % by 2020 [long-term objective:
50 per Cent by 2050]
• Realize Sustainable Development
Scope of Application
• Priority connections to the grid systems for general electricity supply of
plant generating electricity from renewable energy sources
• Priority purchase and transmission of, and payment for, such electricity
by the grid system operators
Obligation to purchase and transmit electricity
• Grid system operators shall connect plants generating electricity
from renewable energy to their systems and guarantee priority purchase
and transmission of all electricity from renewable energy sources
supplied by such plants
Obligation to pay fees
• Grid system operator shall pay fees for electricity generated
in plants exclusively using renewable energy sources
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 29
Common provisions for purchase, transmission and payment of fees
• The amount of the fees shall be determined according to the share oft
then plant’s capacity and the art of generating electricity from renewable energies
• The minimum fees shall be paid from the date of commissioning for a
period of 20 calendar years as well as for the year of commissioning.
In Germany many pilot project show the possibility of turning the fossil energy system into
renewable energy system. One project the Zero Emission Village Weilerbach is shown be-
low.
Box 3: German Pilot Projekt: Zero Emission Village Weilerbach (ZEV)
Municipality/Community Weilerbach
• 18,000 residents including 4000 citizens of the United States
• Surface area: 7.200 square kilometres
• Located in Rhineland-Palatinate, near Kaiserslautern
• Project started in 2001
Objective
• Prevention of fossil CO2 emissions, long-term � to reduce fossil CO2 emissions
to zero to a CO2 neutral energy supply based on regional energy resources
• Optimization of the regional material flows with a benefit for the social,
economical and ecological sector
• Identification and building of a network that connects relevant actors
of the community
• Rapid realization of first plants, to motivate actors
• Enduring implementation
Implementation
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 30
• Decrease current heat and electricity demand by energy-management
and energy saving measures
• Prior application of renewable energy plants based on regional resources
• Intensive information, public relations as well as media relations in the municipality
Results (Project is still ongoing)
• Elaboration of scenarios that quantify that the CO2-neutral renewable energy
supply is possible
• A large number of individual projects in die fields of energy saving, energy
management and renewable energies have been implemented since
the project start in 2001 by private households, companies and the public sector
• Until now more than 19 million Euro have been invested in energy saving
measures and plants for renewable energy generation
• More than 50 % of the annually electricity demand of the whole community
is generated by renewable energy sources today
• The project was so successful, that in 2004 the ZEV-idea was enlarged,
from the municipal up to the hole administrative district Kaiserslautern
(city Kaiserslautern: 110,000 inhabitants)
Partners
• Municipality Weilerbach (Verbandsgemeinde Weilerbach)
• IfaS – Institute for Applied Material Flow Management
• Supported and sponsored by the Ministry for Environment and Forestry,
represented by the Rhineland-Palatinate State Office for Environmental
Education Work (LZU), local actors (citizens, SME, associations etc.)
Based on the idea of saving energy and supplying the remaining demand with renewable
energies, a Master Plan for the whole village of 18.000 people was developed, showing that
there are enough potential to cover all energy demand by local renewable energy sources.
The village already started implementing the Master Plan because more than 60 % of the
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 31
needed investment is economically viable thus creating return on investment for potential
stakeholder. This is partly because of the cost lowering effects of Material Flow Management
but also because of the Renewable Energy Law in Germany. Figure 17 shows the theoretical
potentials in saving energy in German villages or cities.
Figure 17: Energy Zero Emission Strategy in pilot village of Weilerbach
Planned Development of the energy consumption caused by the
implementation of the ZEV concept
Total
energysaving
potential: 55 %
45 %energy
demand to becovered byrenewableenergies
100 %
currentsituationwithout
RES
15 %
15% energy
saving byawareness
building and changingbehaviour
30 %
15 %
30% energy
saving bytechnology investment
15 %
30 %
10 %
10% energy
saving bycooperation+ synergy
effects
RES=Renewable Energy Systems
Source: IfaS ZEV Project Report 2005 16
Implementing Sustainable Development in Germany is one of the federal government’s key
tasks. Increasing resource efficiency and climate protection play a crucial role in this context.
2.1.3 Waste management – steps towards a recycling economy
The waste management sector – an economic sector with over 240,000 employees and an
annual turnover of approx. 50 billion euros, which handles almost 400 million tonnes of waste
every year - is also called on to play its part. The key to waste management policy in Ger-
many is product responsibility. Through this the conditions for an effective and environ-
mentally sound waste avoidance and recovery will already be created in the production
16 The ZEV Weilerbach project was awarded the Solar Energy prize 2005 by (EUROSOLAR) solar energy association German
section
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 32
stage. Producers and distributors must design their products in such a way as to reduce
waste occurrence and allow environmentally sound recovery and disposal of the residual
substances, both in the production of the goods and in their subsequent use. The 1996
Closed Substance Cycle and Waste Management Act puts this policy into practice. The
product responsibility enshrined in this Act can be implemented through both, regulatory
measures (acts, ordinances, administrative provisions) and through voluntary commitments
by the producers and distributors. This policy has enabled Germany to achieve the highest
recovery quotas worldwide. Already over half of both municipal wastes and production
wastes now undergo recovery. For some waste types recycling quotas are even higher - e.g.
packaging (77%) batteries (72%) graphic paper (ca. 87%). In the case of drinks packaging,
the introduced compulsory deposit has already stabilised the market share of reusables.
Figure 18: Objectives of German waste policies are avoidance, recycling and environ-
mentally sound disposal
Source: Federal Ministry for the Environment,
Nature Conservation and Nuclear Safety,
Internet August 2005
Wastes will be further avoided and recovery quotas increased with new legal provisions such
as the End-of-Life Vehicle Act, the Commercial Wastes Ordinance, the Waste Wood Ordi-
nance or the one on Waste Electrical and Electronic Equipment Act. The Waste Storage Or-
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 33
dinance, which stipulates that from 1 June 2005 no municipal wastes may be landfilled with-
out pre-treatment, and an ordinance on the recycling of wastes on landfills (in preparation)
will strengthen this policy.
The waste management policy in Germany thus plays a role in saving primary raw materials
and reducing emissions from greenhouse gases. In 2005 the emission of climate-affecting
gases from annually discarded household waste will be approx. 30 million tonnes CO2
equivalent less than in 1990. The saving effect regarding fossil fuels more than tripled in a
good ten years (1990-2001) due to increased energy recovery and recycling of wastes.
With the 1994 Closed Substance Cycle and Waste Management Act, other specific product-,
substance- and installation-based legal provisions and voluntary agreements with sectors of
industry, policy-making has restructured waste management in Germany over the past 15
years. From 24 March 2006 consumers can return old radios, computers and other electrical
and electronic equipment to local collection points free of charge. The new Electrical and
Electronic Equipment Act, promulgated in the Federal Law Gazette, provides for this option.
With this Act, Germany is one of the first EU countries to implement the respective EU direc-
tives. As of March 2006 producers are obligated to take back the equipment collected and to
dispose of it in compliance with the technical state of the art.
Starting on 24 November 2005 already, producers have to register before placing electrical
equipment on the market. The producers' Clearing House, which has administrative powers
and is to be set up by the industry, will be the central register. It will be under the supervision
of the Federal Environmental Agency (UBA). Furthermore, it will have to coordinate the sup-
ply of first sets of containers to public waste management authorities and the collection of
equipment from the local collection points by the producers. Moreover, certain heavy metals
such as lead or cadmium as well as brominated flame-retardants may no longer be used for
new equipment as of July 2006. Since June 2006 the landfilling of untreated waste is forbid-
den in Germany. Thus the development of inert landfills will be forced. Till 2020 the govern-
ment aims at phasing out landfills totally by 100% recycling or reuse of all waste. The history
of waste management from 1945 till today is shown in figure 19 below. It can be seen that
modern waste management in Germany started about 30 years ago. Before it was a rather
chaotic situation of dumping waste. Since 2004 more and more policy and technical devel-
opment leads to an integrated management of material flow, which may result in a
100 % reuse of waste.
Figure 19: History and future of Waste Management in Germany
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 34
06.April 2004 Local Waste Management in Germany
Matflow Consulting
Prof. Baur & Prof. Dr. HeckHistorical Development*
* based on: Schenkel, W., Zur Geschichte der Abfallwirtschaft in Deutschland, Müll und Abfall 12/03
1. period / „from chaos to order“ 1945 - 1972
2. period / „from waste dumping to recycling- and waste management“
1973 - 1996
3. period / „searching for a new order“ 1997 - 2003
Integrated material flow management?
> 2004
Source: own compilation
Box 4: Important laws and regulations in the field of waste management
• Act for Promoting Closed Cycle Waste Management and Ensuring Environmentally
Compatible Waste Disposal, Close substance cycle and waste management act
Gesetz zur Förderung der Kreislaufwirtschaft und Sicherung der umweltverträglichen Be-
seitigung von Abfällen (Kreislaufwirtschafts- und Abfallgesetz KrW-/AbfG)
Promulgated of 27 September 1994 (Federal Law Gazette I p. 2705); last amendment on
21 June 2005 (Federal Law Gazette I p. 1666), entered info force 1996 The purpose of this
act is to promote closed cycle waste management, in order to conserve natural resources
and to ensure the environmentally compatible disposal of waste.
• Ordinance on Waste Management Concepts and Waste Balance Sheets
Verordnung über Abfallwirtschaftskonzepte und Abfallbilanzen (Abfallwirtschaftskon-
zept- und -bilanzverordnung AbfKoBiV)
of 13 September 1996 (Federal Law Gazette I p. 1447), last amendment on 24 June 2002
(Federal Law Gazette I p. 2247)
Ordinance on Waste Oil
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 35
Waste Oil Ordinance (Altölverordnung AltölV) of 27 October 1987 (Federal Law Gazette
I p. 2335), last amendment on 16 April 2002 (Federal Law Gazette I p. 1368)
• Act on the Disposal of End-of-life-Vehicles, End-of-life-Vehicle Act
Gesetz über die Entsorgung von Altfahrzeugen (Altfahrzeug-Gesetz AltfahrzeugG) of 21
June 2002 (Federal Law Gazette I p. 2199)
• Ordinance on the Transfer, Collection and Environmentally Sound Disposal of End-
of-life-Vehicles, End-of-life-Vehicles Ordinance
Verordnung über die Überlassung, Rücknahem und umweltverträgliche Entsorgung von
Altfahrzeugen (Altfahrzeug-Verordnung AltfahrzeugV) of 4 July 1997 (Federal Law Ga-
zette I p. 1666), last amendment on 25 November 2003 (Federal Law Gazette I 2304)
• Ordinance on the Management of Waste Wood
Waste Wood Ordinance Verordnung über die Anforderungen an die Verwertung und Be-
seitigung von Altholz (Altholzverordnung AltholzV) of 15 August 2002 (Federal Law
Gazette I p. 3302)
• Ordinance on the Return and Disposal of Used Batteries and Accumulators, Battery
Ordinance
Verordnung über die Rücknahme und Entsorgung gebrauchter Batterien und Akkumula-
toren (Batterieverordnung BattV) of 27 March 1997 (Federal Law Gazette I p. 658), last
amendment on 9 September 2001 (Federal Law Gazette I p. 2331)
• Ordinance on the Utilisation of Biowastes on Land used for Agricultural, Silvicul-
tural and Horticultural Purposes, Ordinance on Biowastes
Verordnung über die Verwertung von Bioabfällen auf landwirtschaftlich,
forstwirtschaftlich und gärtnerich genutzten Böden (Bioabfallverordnung BioAbfV) of 21
September 1998 (Federal Law Gazette I p. 2955), last amendment on 26 November 2003
(Federal Law Gazette I p. 2373)
• Ordinance on Landfills and Long-Term Storage Facilities and Amending the Ordi-
nance on Environmentally Compatible Storage of Waste from Human Settlements
and Biological Waste-Treatment Facilities, Landfill Ordinance
Verordnung über Deponien und Langzeitlager (Deponieverordnung DepV) of 24 July
2002 (Federal Law Gazette I p. 2807), last amendment on 12 August 2004 (Federal Law
Gazette I p. 2190)
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 36
• Ordinance on Environmentally Compatible Storage of Waste from Human Settle-
ments
Verordnung über die umweltverträgliche Ablagerung von Siedlungsabfällen
(Abfallablagerungsverordnung AbfAblV) of 20 February 2001 (Federal Law Gazette I p.
305), last amendment on 24 July 2002 (Federal Law Gazette I p. 2807)
• Technical Instructions on the Recovery, Treatment and Other Management of
Wastes from Human Settlements, Technical Instruction on Waste from Human Set-
tlements
Technische Anleitung zur Verwertung, Behandlung und sonstigen Entsorgung von Sied-
lungsabfällen
(TA Siedlungsabfall) of 14 May 1993 (Federal Gazette No 99a on 29 May 1993), com-
mencement of the technical instruction on 1 June 2005
• Act Governing the Sale, Return and Environmentally Sound Disposal of Electrical
and Electronic Equipment, Electrical and Electronic Equipment Act
Gesetz über das Inverkehrbringen, die Rücknahme und die umweltverträgliche Ent-
sorgung von Elektro- und Elektronikgeräten (ElektroG) of 24 March 2005 (Federal Law
Gazette I p. 762) The Act used to implement the Directive 2002/96/EC concerning electric
appliance and the Directive 2002/95/EC concerning reducing the use of specified materi-
als for electrical equipment. The purpose of the Act is the prevention of waste of electrical
equipment, the reduction of the quantity of waste by recovering, by giving a handicap of
gathering, utilisation and recycling quotes and the decrease of harmful substances in the
equipment.
• Ordinance on the Management of Municipal Wastes of Commercial Origin and Cer-
tain Construction and Demolition Wastes, Commercial Wastes Ordinance
Verordnung über die Entsorgung von gewerblichen Siedlungsabfällen und von bes-
timmten Bau- und Abbruchabfällen (Gewerbeabfallverordnung GewAbfV)
of 19 June 2002 (Federal Law Gazette I p. 1938), last amendment on 25 July 2005 (Fed-
eral Law Gazette I p. 2252)
• Ordinance on the Avoidance and Recovery of Packaging Wastes, Packaging Ordi-
nance
Verordnung über die Vermeidung und Verwertung von Verpackungsabfällen (Ver-
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 37
packungsverordnung VerpackV) of 21 August 1998 (Federal Law Gazette I p. 2379), last
amendment on 24 May 2005 (Federal Law Gazette I p. 1407)
• Ordinance on Underground Waste Stowage, Stowage Ordinance
Verordnung über den Versatz von Abfällen unter Tage
(Versatzverordnung VersatzV) of 24 July 2002 (Federal Law Gazette I p. 2833), last
amendment on 12 August 2004 (Federal Law Gazette I p. 2190)
• Act on the Prevention of Harmful Effects on the Environment Caused by Air Pollu-
tion, Noise, Vibration, an Similar Phenomena, Federal Immission Control Act
Gesetz zum Schutz vor schädlichen Umwelteinwirkungen durch Luftverunreinigungen,
Geräusche, Erschütterungen und ähnliche Vorgänge
(Bundesimmissionsschutzgesetz BimSchG) It is the purpose of this Act to protect human
beings, animals and plants, soil, water, the atmosphere as well as cultural assets and other
material goods from harmful effects on the environment and to take precautions against
the emergence of any such harmful effects on the environment.
Box 5: Technical Instructions on the Recovery, Treatment and Other Management of
Wastes from Human Settlements Technical Instruction on Waste from Human Settle-
ments (TA Siedlungsabfall TASi) of 14 May 1993 (Federal Gazette No 99a on 29 May
1993)
The transitional period for organic waste deposit ended in June 2005 (Became effective –
1 June 2005)
Main objective
• Recycling of not avoided waste as far as possible
• Holding harmful substances of the waste as low as possible
• Ensuring an ecological handling and disposal of non-recyclable waste
Scope of application
• Contain the requirements relating to the recovery, treatment and other management of
wastes from human settlements in accordance with the state of the art
• Shall apply accordingly to production wastes as well as wastes in particular need of moni-
toring which can be managed together with wastes from human settlements or managed in
the same way as them
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 38
• Shall provide the enforcing authorities with a basis for examination and decision-making
General regulations
• Defines the term state of art
• Defines terms and units of measure
• Defines the methods of sampling, measurement and analyses
• Defines the procedure of exemptions
Licensing of waste management facilities
• The pertinent regulations set out in this technical instructions must be observed when li-
censing waste management facilities or when licensing the premature commencement of
operation
Allocation of the method of waste management
• Defines the allocation criteria for recovery concerning technical feasibility, reasonableness,
existence and creation of a market and ecological effects
• Defines the allocation criteria for landfilling concerning different classes of landfills for
different wastes
Requirements
• Defines requirements in substance recycling and pollutant extraction
• Defines requirements on the organisation and personnel of waste management facilities
as well as information and documentation
• Defines the general requirements on interim stores, treatment facilities and landfills
• Gives particular requirements on interim stores
• Gives particular requirements on treatment facilities
• Gives particular requirements on landfills
• Defines requirements on existing sites
2.2 Japan
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 39
Japan has at least nominally a perfect system for Circular Economy, which covers each field
of production and life. There are eight laws in the system among which the law on formation
and promotion of Circular Economy enacted in 2000 is the most typical. This law makes Ja-
pan at least verbally stand out in Circular Economy.17 In addition there are strong NGO activi-
ties for creating a sustainable Japan. Figures 20 and 21 explain the framework of a sustain-
able Japan project from Japan for Sustainability NGO. The project description gives a clear
view of the overall meaning of sustainability. What is missing is the relationship to the Circu-
lar Economy activities of the government.
2.2.1 Sustainable Development in Japan
Figure 20: Japan for Sustainability – Project Overview
Source: Japan for Sustainability 2006
17 See Lu, Hu, Wang, 2005, p.18
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 40
Figure 21: Overall framework of JFS vision for Sustainable Japan
Source: Japan for Sustainability 2006
Table 3: Indicators for sustainable society
Capacity
and Re-
source
Fairness
across
Time
Fairness
across
Space
Diversity
Human Will
and Net-
working
Nature
resource
cycling,
water/
soil/ air
climate
change
climate
change biodiversity
environmental
education
Economy
energy,
resource
produc-
tivity,
food
finance
food,
international
cooperation
energy international
cooperation
Society security tradition/
culture mobility
gender and
minority,
tradition
money flow
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 41
and culture
Well-
being health
wealth
gap wealth gap
participation
in commu-
nity
life satisfac-
tion,
academic
performance
and education
level,
health, par-
ticipation in
community
Source: Japan for Sustainability 2006
JFS has chosen 20 headline indicators for sustainability (see table 3) and made the first nu-
merical evaluation of national sustainability for Japan. Results show a score of 33.5 for 2005
in relation to a hypothetical perfect score of 100 projected for 2050, down about 19% from
41.3 points for 1990. The overall analysis of the estimation shows that sustainability in Japan
has rather declined than improved, though some of indicators have shown improvement (see
figure 22). The condition of four main aspects of sustainability namely nature, economy, so-
ciety and well being is as follows18:
Nature : There are many challenges concerning nature, as efforts by various sectors in re-
cent years concerning climate change, resource cycling and wastes have not led to better
numerical values. However, the overall point has improved slightly since 1990, reflecting in-
crease in green consumerism, society-wide increase in environmental awareness and overall
improvement in condition of water, soil and air. Though the sustainability has not improved in
terms of environmental impact, we made positive evaluation considering the steadfast im-
provement in environmental literacy, and hoping for further improvement. Among headline
indicators, climate change is the most urgent issue at present.
Economy: The overall score deteriorated since 1990, reflecting massive debt accumulation,
which is a major issue bearing on fairness to coming generations. In light of a sustainable
and self-supporting economy, extremely low self-sufficiency in food and energy remains ma-
jor problem indigenous to Japan and further improvement in resource-productivity is needed.
Though Japan’s economy is big in scale, the overall score is the lowest of all four categories
in terms of sustainability. Future issues for our rapidly graying society include how to build
18 Data and text from Japan for Sustainability NGO
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 42
new value systems and how to achieve a paradigm shift from a growth-geared economy to a
sustainable one.
Society: Participation in society by women improved since 1990, though remaining low rela-
tive to international standard, which is favorable trend in view of diversification. The advent of
investment style such as SRI, socially responsible investment, is another encouraging sign of
social change, though the scale is still small compared to those of Western countries. How-
ever, as for culture and tradition, traditional industries that have figured prominently in creat-
ing Japanese cultural values are close to annihilation, so overall score deteriorated since
1990.
Well-being: The score for individual well-being is relatively high, as a certain level of quality
of life is attained in Japan. However, suicide rates at historic high are extremely high com-
pared to other OECD countries. Growing wealth gap represented by individual livelihood se-
curity is another sign of deteriorating sustainability, so overall score for individual well-being
also deteriorates since 1990. Developing a model society, where individuals can participate
and enjoy life without significant disparity irrespective of age or sex, is an issue in the future.
Figure 22: Development of Sustainability in Japan 1990 - 2005
Source: Japan for Sustainability 2006
2.2.2 Energy in Japan
Japan is among the biggest energy users worldwide. More than 90% of Japans energy hun-
ger is fuelled by imports of fossil energy sources namely oil and gas. Figure 23 shows the
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 43
composition of energy primary energy supply in Japan. Remarkable is the percentage of hy-
dro and renewable energy sources.
Figure 23: Composition of primary energy supply in Japan
Source: Agency for Natural Resources and Energy, METI
Japans total energy demand increased from 285 million kiloliters (oil equivalent) in 1973 to
349 million in 1990 and 405 million in 2000. The increase is mainly attributed to people´s de-
sire for convenience and affluent lifestyles. In terms of energy consumption per unit of eco-
nomic activity, Japan is among the most energy efficient countries in the world. The compari-
son shown in the table below, places Japan at the top of an energy efficiency list followed by
Germany and France. The USA and Canada trailing far behind.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 44
Table 4: Energy efficiency in selected developed countries
Country Japan Germany France UK Sweden USA Canada
Efficiency
indicator*
96 130 150 183 191 264 365
*oil equivalent in million metric tons divided by gross domestic product in trillion dollars (at 1995 prices
after foreign exchange adjustment).
Source: Agency for Natural Resources and Energy, METI
Figure 24: Energy consumption per GDP production
Source: Agency for Natural Resources and Energy, METI
Through the energy efficiency efforts of the public and the government, Japan has achieved
the highest level of energy efficiency anywhere in the world since the oil crises (see figure 24
and table 4). However, the weakness of Japans energy supply structure remains unchanged,
and the level of dependency on Middle East crude oil is higher than at the time of the oil
crises. With an increasing tendency of energy consumption in commercial/residential and
transportation sectors in recent years, the promotion of steady energy efficiency measures in
the future is essential. In 1998, aiming to achieve Japan's targets that were set at the Kyoto
Conference on Climate Change (COP3), the current energy measures for energy efficiency
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 45
to the amount of 56 million kl (crude oil equivalent) were formulated. In addition, in the total
review of energy policy, which was conducted by the Advisory Committee for Natural
Resources and Energy from 2000, the current energy efficiency measures of the Energy
Efficiency and Conservation subcommittee were reevaluated (approx 50 million kl (crude oil
equivalent)), and additional measures for the rapidly increasing energy demand of the
residential / commercial and transportation sectors were created (7million kl (crude oil
equivalent)), and a report for the future structure of energy efficiency policy was put together
at the end of June 2001 (see figure 26).
In order to steadily execute the measures outlined in that subcommittee report, in addition to
an expansion of implementation support measures (planned budget amount for FY2002 is
131.2 billion yen (an increase of 20% on the previous Fiscal Year)), the Law amendment bill
(Law Concerning the Rational Use of Energy), has now been submitted before the regular
session of the Diet. Its contents introduce a mechanism of energy management to be applied
to large-scale factories and office buildings and its purpose is the strengthening of measures
addressing the rapid increase in energy demand from areas such as the commercial sector.
Table 5: Goals for development of renewable energies in Japan
Source: Agency for Natural Resources and Energy,
METI
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 46
For the year 2010 3% of primary energy demand is supposed to come from renewable en-
ergy sources (see table 5). Compared to Germany this goal does not seem to be very ambi-
tious. Aside from the support of renewable energy sources energy efficiency measures like
conservation labelling systems were introduced. Figure 25 shows how the labelling works.
Figure 25: Energy conservation labelling system
Source: Agency for Natural Resources and Energy, METI
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 47
Figure 26: Energy measures in Japan
Source: Agency for Natural Resources and Energy, METI
Table 6: Status Quo and future development of renewable energies in Japan
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 48
Type of new En-
ergy condition of introduction
Photovoltaic
power generation
Application has increased by 3.5 times during the last 3 years. Generating cost is
still high, even though the price of the system has come down over the last six
years to one fourth of what it had been.
Wind power gen-
eration
Application increased by about 7 times during the last 3 years, and its commercial
viability has been recognized depending on local conditions. Future issues are
economic efficiency and stability.
Waste power
generation
Local communities are mainly promoting the installation of facilities. A future is-
sue is the problem of location, etc.
Biomass power
generation
Wooden chips, bagasse (sugar cane husks) and sludge are used mainly. In re-
cent years, there have been trials using methane gas from the food waste, but
still economic viability is still an issue.
Solar thermal
utilization Level of application has decreased in recent years. The main issue is economy.
Thermal utiliza-
tion of waste
Temperature dif-
ference energy
While there are some cases where it is introduced as a heat supply project, the
number of applications is in low.
Thermal utiliza-
tion of biomass
Black liquor waste accounts for a substantial amount of the new Energy in this
area, such as biomass heat utilization.
Clean energy mo-
tor vehicles
Hybrid automobiles and natural gas automobiles are steadily increasing, and the
level of application amounted about 4-fold during the last 3 years. Future issues
are economic efficiency, performance and infrastructure availability.
Natural gas co-
generation
The application increased by about 1.4 times during the last 3 years. High effi-
ciency facilities are still expensive.
Fuel cell Phosphoric acid type has decreased. Competition to develop solid high polymer
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 49
types is already noticeable in domestic and overseas companies to develop cells
for practical use and dissemination. Large-scale application is anticipated in fu-
ture.
Source: Agency for Natural Resources and Energy,
METI
2.2.3 Establishing a sound Material-Cycle Society
2.2.3.1 Fundamental Law for Establishing a Sound Material-Cycle Society19
Having experienced severe industrial pollution and serious conflict between sustainability
and waste problems, Japan now seeks to establish a sound material-cycle society where
economics and environment are compatible. For that purpose, the Fundamental Law for Es-
tablishing a Sound Material-Cycle Society (Material-Cycle Fundamental Law) was laid down
in 2000. Based on this law, the Fundamental Plan for Establishing a Sound Material-Cycle
Society (Material-Cycle Fundamental Plan) was set up in March 2003, and this plan deter-
mines quantitative numerical targets to be achieved by 2010. According to the plan, stake-
holders will cooperate to pursue various tangible efforts in the following areas:
1. Waste Prevention
2. Utilization of Recycling Resources
3. Promotion of Recycled Goods
4. Ex-ante Evaluation of Industrial Products
5. Environment Preservation along Recycling and Disposing
6. Financial Assistance for Waste Prevention
7. Enforcement and Enhancement of Related Research
19 Text by Prof Dr Sakai
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 50
2.2.3.2 Definition of a Sound Material-Cycle Society
Article 2 of the Material-Cycle Fundamental Law defines “a Sound Material-Cycle Society” as
“a society where the consumption of natural resources is minimized and the environmental
load is reduced as much as possible, by restraining products from becoming wastes promot-
ing appropriate recycling of products when they have become recyclable resources, and se-
curing appropriate disposal of the recyclable resources not recycled.
2.2.3.3 Three Indexes of Material Flow Proposed in the Material-Cycle Funda-
mental Plan
While the Material-Cycle Fundamental Law covers priority areas regarding waste, such as
prevention, reuse, recycling, heat recovery, and appropriate disposal, the Material-Cycle
Fundamental Plan sets tangible target indices for an enforcement of the law. That is, numeri-
cal targets are set for “Resource Productivity”, “Cyclical Use Rate” and “Final Disposal
Amount”, which represent three aspects of the material flows in a society, i.e., inlet, cycle,
and outlet, respectively (Fig. 27). Defined as the ratio of GDP to input of natural resources
and the like, “Resource Productivity” is targeted to increase from 280 thousand yen per ton in
2000 to 390 thousand yen per ton in 2010. This is the index to comprehensively represent
how effectively materials are used by industries and in people’s lives. Since recycling and
waste generation are inseparably linked to economic activity, the proposal of an index such
as “Resource Productivity,” which combines an index of input volume and an index of eco-
nomic activity, is quite a significant step. The “Cyclical Use Rate” index is defined as the ratio
of the amount of cyclical use to the sum of the amount of cyclical use and the input of natural
resources and the like, and it is aimed to increase this index to 14% in 2010 from 10% in
2000. The target for “Final Disposal Amount” is to reduce landfill waste from 56 million tons
per year to 28 million tons per year over the same period. The achievement of the numerical
targets is planned to be verified in the future.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 51
Fig. 27: Three Indicators in the Fundamental Material Cycle Plan
Source: Sakai, 2005
2.2.3.4 Significance and Future of the Index of “Resource Productivity”
The emergence of the “Resource Productivity” index signifies the trend of the discussion
about how to establish a sound material-cycle society; that is, triggered by the waste prob-
lem, a quest to establish a sound material-cycle society has led to a quest for the efficient
use of resources and is associated with economic indicators. The establishment of those in-
dices owes a great deal to the long-term international studies of Moriguchi et al., who have
introduced such indicators as Direct Material Input (DMI) and Direct Processed Output (DPO)
as indexes of material flow and who have conducted a series of comparative studies interna-
tionally to examine the relationship between those indicators and GDP.
International collaborative studies on macro flow indices such as “Resource Productivity”
and studies on material flow in the Asian region should be pursued. In addition, the Material-
Cycle Fundamental Plan set targets for efforts to establish a sound material-cycle society, for
instance, 50 percent of all companies listed in the first and second sections of the Japanese
�������������
��� � �������� ���� ����� ��� � �������� ������� ���������� �� !" ���#"$�%�&
'() *+,-. +/0+12.3,'() *+,-. +/0+12.3,'() *+,-. +/0+12.3,'() *+,-. +/0+12.3, 44445)-36,1) 7,3061.+8+.95)-36,1) 7,3061.+8+.95)-36,1) 7,3061.+8+.95)-36,1) 7,3061.+8+.92- +/:). +/0+12.3,2- +/:). +/0+12.3,2- +/:). +/0+12.3,2- +/:). +/0+12.3, ;<= >$#$��%�?< �#"$�%@ABCDE FBGHIGDEDJIKCL�"M#�%�"� "N =� %< ��� %O< ��P<
QRSTUVRWXWYZ [#"$�% "N <\!"M%]^�M<>% _�%<M��� `�!$% ��$< a� ��� �M����a<��� %O< ��P<bcdefghi ej klfil mgnklopoqrgs
'() .(+,0'() .(+,0'() .(+,0'() .(+,0+/0+12.3,+/0+12.3,+/0+12.3,+/0+12.3, 4444t+/2: u+-v3-2:t+/2: u+-v3-2:t+/2: u+-v3-2:t+/2: u+-v3-2:wx36/.wx36/.wx36/.wx36/. 2-2-2-2-36.:).+/0+12.3,36.:).+/0+12.3,36.:).+/0+12.3,36.:).+/0+12.3,y<%$M�<� %"��%$M<z{{|}~���z{{|}~���z{{|}~���z{{|}~���������{|}��������{|}��������{|}��������{|}������������������� ���� ���� ���� ���� ���� ����������������� ������������� ���� ���� ���� ���� ���� ������������������������������ ���� ���� ���� ���� ���� ����� ��������������� ���� ���� ���� ���� ���� ����� �� z{{|}~����z{{|}~����z{{|}~����z{{|}~������{|}��������{|}��������{|}��������{|}������ ��������������� ���� ��� ���� ���� ���¡ ���¢ ���£ ��� ���¤ ���¥ ���� ���� ¡���¦§̈̈§��������©ª ��������������� ���� ��� ���� ���� ���¡ ���¢ ���£ ��� ���¤ ���¥ ���� ���� ¡���¦§̈̈§��������©ª z{{|}~�«�z{{|}~�«�z{{|}~�«�z{{|}~�«�����|�¬®��}�|�¬®��}�|�¬®��}�|�¬®��}�
'() -)13/0 +/0+12.3,'() -)13/0 +/0+12.3,'() -)13/0 +/0+12.3,'() -)13/0 +/0+12.3, 4444¯91:+12: °-) 52.)¯91:+12: °-) 52.)¯91:+12: °-) 52.)¯91:+12: °-) 52.) 2-2-2-2-191:) +/0+12.3,191:) +/0+12.3,191:) +/0+12.3,191:) +/0+12.3,
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 52
stock exchanges will implement organization-wide green purchasing. The achievement of
those targets also should be followed up.
Japans socio-economic activities expanded in the 20th century, contributing to greater arterial
prosperity for humankind. However this led to increases in the volume of waste generated,
difficulties in waste treatment due to diversification of types of waste and environmental
pollution caused by inappropriate waste management. These problems stem from mass
production, mass consumption, and mass disposal patterns rooted in the current socio-
economic system. In order to solve these problems, it is necessary to establish a sound
material –cycle society, in which consumption of natural resources is reduced and
environmental impacts are minimized.20
The vision of a sound material cycle society entails:
I) Use of products within the geographical area where they are produced, or establishment of
what might be called a “slow” lifestyle through the use of good products with the care for a
long period of time;
II) Regarding manufacturing: dissemination of environmental services such as designing
products for easy recycling, designing products which can be refilled, or implementing
lease/rental systems;
III) Promotion of development of infrastructure for waste disposal, recycling facilities or ac-
cumulation of relevant information and the enhancement of human resources.
2.2.4 Today situation of waste management in Japan
Domestic waste (chiefly household) generated in Japan in fiscal 1999 totalled 51.4 million
tons, an average of 1,114 grams (approximately 2.46 pounds) per person every day. There is
a growing shortage of landfill sites because the amount of waste generated is increasing
(see Figure 28). Estimates show that landfill sites in Japan will last only another 12.3 years
(from fiscal year 1999) with current domestic waste generation patterns.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 53
Figure 28
Hazardous wastes: Japan signed and ratified The Basel Convention on the Control of Trans-
boundary Movements of Hazardous Wastes and their Disposal in 1993. The latest informa-
tion was provided to the Basel Convention Secretariat in 1994. Japan strictly enforces the
Basel Convention by means of proper implementation of the relevant domestic laws and
regulations including, in particular, the Law on the Control of Export, Import and Management
of Specified Hazardous Wastes and Other Wastes which has specifically been
enacted for the purpose of implementing the Basel Convention. A penalty regime has been
established against illegal transactions of wastes. The Waste Disposal and Public Cleansing
Law, which is Japan's general law for the management of waste, was broadly amended in
20 Office of sound material cycle, March 2003
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 54
October 1991 as the basis for ensuring proper disposal and reduction of waste, as well as
the construction of disposal facilities. In July 1992, these amendments were put into effect. In
May 1992, Japan established the Law Regarding the Promotion of the Construction of Speci-
fied Facilities for the Disposal of Industrial Waste to give due consideration to the importance
of maintaining waste disposal facilities for environmentally sound management of hazardous
wastes. To promote the spread of waste disposal facilities, Japan is adopting measures con-
cerning taxation and finances. Japan promotes the prevention and minimization of hazardous
waste by continuing to provide technological and financial assistance to
prefectural governments which enforce the Waste Disposal and Public Cleansing Law, and
by strengthening institutional capacities in hazardous waste management. Local authorities
represented by prefectural governors and mayors of cities, towns and villages have been
given the power to instruct businesses, which generate a large amount of wastes, to draw up
plans for waste reduction. In accordance with the October 1991 amendments of the Waste
Disposal and Public Cleansing Law, each of the individual prefectures has the power to des-
ignate Waste Treatment Public Center for disposing of specially controlled wastes.
Solid wastes: In 1991 a Council for the Promotion of Recycling was established to bring to-
gether industrial and consumer organizations in this field. The disposal of waste is conducted
in accordance with the Waste Disposal and Public Cleansing Law. In September 1992, in or-
der to promote the reduction of waste, a National Conference for the Promotion of the Re-
duction in the Amount of Garbage was established. Another relevant data is the October of
1991; The Law for Promotion of Utilization of Recyclable Resources, the Law on Temporary
Measures to Promote Business Activities for the Rational Use of Energy and the Utilization of
Recycling Resources, and the amended 1991 Waste Management Law came into force. The
1990 Guidelines that were developed from the report of the Subcommittee for Industrial
Structure on measures to address waste disposal and recycling of resources are applied and
reviewed on an annual basis. In 1995, “The Law for the Promotion of Sorted Collection, and
Recycling of Containers and Packaging” was established to encourage the establishment of
new recycling and packaging systems under the each responsibility of consumers, local gov-
ernments and producers. With the wide-ranging amendments of the Waste Disposal and
Public Cleansing Law in 1992, the basic policy is to promote the planned disposal of wastes,
and Japan is enforcing measures to reduce wastes, including the promotion of appropriate
packaging for goods, packaging reuse, composting and the segregation and separate collec-
tion of recyclable waste. In order to construct a socio-economic system with reduced envi-
ronmental load, Japan is reducing waste amounts by promoting the recycling of resources as
well as limiting the generation of wastes.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 55
According to a waste collection plan, in 1993, the percentage of the total population, which
receives collection service for general waste, had reached 100%. However, when looking at
the conditions of disposal, the amount accounted for by direct reclamation was equal to
14.4% of the total amount of waste generated. The amount of household disposal by house-
hold was equal to 2.0% of the total. At present, the population ratio of domestic wastewater
treatment is 51.6%. Improvement of sewerage is slow in small and medium-sized municipali-
ties. In accordance with the Five-Year Plan for the 8th Stage of Waste Treatment Facilities
Improvement, started in 1990, local authorities have decided to reduce the disposal amount
of garbage to 91% of the present amount, by means of incineration, segregation, and com-
posting. In 2000, Food Recycle Law was established to restrain generation of food wastes,
reduce the amount of food wastes, and recycle them as animal feed or manure.
Radioactive wastes: Legislation concerning the safe management of radioactive wastes in-
cludes the Law for the Regulation of Nuclear Source Material, Nuclear Fuel Material and Re-
actors, and the Law concerning Prevention from Radiation Hazards due to Radio -Isotopes,
etc. Regarding measures for the treatment and disposal of radioactive wastes, Japan abides
by such international arrangements as Convention on the Prevention of Marine Pollution
from Dumping of Wastes and other Matter. Japan will continue to cooperate with the Interna-
tional Atomic Energy Agency (IAEA). Japan considers that, in addition to promoting the re-
duction of radioactive wastes, it is necessary to take measures for their appropriate treatment
and disposal. In this regard, and based on the Long-Term Program for Research Develop-
ment and Utilization of Nuclear Energy, Japan promotes various measures including those
for ensuring financial resources, promoting research and development, and strengthening in-
ternational cooperation. Japan is also in favour of an early completion of the Convention on
the Safety of Radioactive Waste Management (tentative name).
Authorities, citizens and corporations: Japan promotes public awareness of appropriate
waste disposal, environmental education and assists voluntary activities among the private
sector, through the national government and local authorities, to encourage companies to
develop waste reduction and reuse policies. In 1991, with a view to enhancing public aware-
ness, ministries and government agencies declared October of each year as the month for
the promotion of recycling. In addition to promoting the improvement of sewerage, Japan
will also promote the improvement of community plants and Gappei-shori johkasou (domestic
waste water treatment system) in towns and villages.
Solid wastes: As an incentive to recycle, Japan has adopted measures for special tax re-
demptions in regards to facilities for recycling waste, as well as financial measures for low-
interest financing through governmental financial agencies.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 56
Air Pollution Control Law and Water Pollution Control Law control the discharge of chemicals
into the environment. In May 1996, Japan amended the Air Pollution Control Law for the pur-
pose of preventing human health damage caused by long-term exposure to hazardous air
pollutants. The Agricultural Chemicals Regulation Law prohibits the sale of unregistered agri-
cultural chemicals. Standards have also been developed for the registration of agricultural
chemicals with respect to their residue in crops and water pollution. Toxic chemicals are con-
trolled in Japan in accordance with such laws as the Law concerning the Examination and
Regulation of Manufacture, etc. of Chemical Substances (Chemical Substances Control
Law), the Poisonous and Deleterious Substances Control Law and Industrial Safety and
Health Law. Under these Laws, Japan conducts evaluation of safety-related properties, in-
cluding the potential for biodegradability, bioaccumulation, and the toxicity of chemicals.
Based on its findings, Japan establishes regulations and basic management procedures for
manufacture, import and use of such chemicals. Also Japan supports worldwide harmoniza-
tion in the classification and labelling of dangerous and toxic chemicals. Local authorities and
business groups are involved in the decision-making and implementation of activities in this
area. Japanese industries started voluntary emission control measures of some hazardous
air pollutants with a pledge and review system. The Law Concerning Reporting, etc. of Re-
leases to the Environment of Specific Chemical
Substances and Promoting Improvements in Their Management (PRTR Law) has been
promulgated in July 1999. Under the Law, the MSDS and PRTR started in 2001.
Programmes and Projects: Japan Chemical Industries Association has implemented the
pollutants release survey through “responsible Care” since 1992. Japan has carried out the
PRTR Pilot Project in local areas since 1997. The Comprehensive Chemical Assessment
and management Programme has started in 2001 to develop risk assessment methods and
assess the risks of the chemicals of High Production Volume.
Status: Government of Japan has worked for promoting business's self-management activi-
ties to control the use of industrial chemicals. For example, the Ministry of Economy, Trade
and Industry and Ministry of the Environment has cooperatively requested industries to make
voluntary control plan to reduce emission of thirteen air pollutants in 1996. As the result of
implementing the first -stage voluntary control self-management plan from FY1997-1999,
seventy-seven industries associations reported that they reduced air pollutant emission
by about 40%. The industries have started the second-stage voluntary control plan from
FY2001.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 57
Capacity-Building, Education, Training and Awareness-Raising: The Government has
published and distributed the manual for businesses to estimate the quantities of designated
chemical substances released to the environment under the PRTR Law. The Government
has been also developing a guidance document of risk communication for businesses and a
guidebook for citizens to understand the PRTR. Efforts have been made for the public to bet-
ter improve this understanding on chemical safety and management, including the PRTR
Law.
Information: Japan conducts systematic environmental surveys and monitoring to measure
the state of chemical residue in the environment, and acts accordingly. The Government col-
lects and publishes the data on water quality, air quality and the discharge of chemicals from
facilities into water. The Government has established database for information of chemical
substances and makes it available to the public.
Several activities about endocrine disrupting chemicals such as development of screening
test methods and risk assessment have been promoted in collaboration with relevant minis-
tries. The Ministry of the Environment has announced the “Strategic Programs on Environ-
ment Endocrine Disrupters'98” (SPEED'98) (Established in 1998 and revised in the year
2000).
Financing: The Government provides funds for R & D and the other necessary expenditures
to implement the above-mentioned topics and also secures funds to manage related national
research institutions by its budget.
Cooperation: Japan participates in related programmes of the OECD, in the International
Programme on Chemical Safety (IPCS) of UNEP, ILO, WHO and FAO, and in the Interna-
tional Register of Potentially Toxic Chemicals (IRPTC). It supports the London Guidelines for
the Exchange of Information on Chemicals in International Trade as well as the extension of
the Guidelines to require the prior informed consent (PIC) procedure. In conformity with the
London Guidelines, Japan has amended the Export Trade Control Order to establish a sys-
tem for management of exports of toxic chemicals, which are prohibited or strictly restricted
in Japan or internationally. As a part of OECD activities, Japan has been participating in the
co-operative investigation of high production volume (HPV) chemicals programme since
1991. The Government provides technical cooperation to establish testing organizations on
chemical safety in Least Developed Countries (LDCs) by the Official Development Assis-
tance (ODA).
2.2.5 Changing consumption pattern
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 58
The responsible government bodies dealing with aspects of sustainable consumption and
production patterns are the Ministry of the Environment, the Ministry of Health, Labour
and Welfare and the Ministry of Economy, Trade and Industry. At the local level, it is the
Division in charge of this issue in prefectural and municipal governments. Laws regarding
changing consumption include the following: The Law for the Promotion of Utilization of Re-
cyclable Resource: Based on the Law for the Promotion of Utilization of Recyclable Re-
sources which came into effect in October 1991; The Law for the Promotion of Sorted Collec-
tion and the Recycling of Containers and Packaging: In order to establish a system to pro-
mote the sorted collection of these items by municipal governments as well as their re-
commercialization by industry, the Law for the Promotion of Sorted Collection and the Recy-
cling of Containers and Packaging was enacted in June 1995 and came into force in April
1997; Waste Management and Public Cleansing Law: The Waste Management and
Public Cleansing Law was enacted in 1970 for the purpose of preserving the living environ-
ment and public health through reducing the waste generation, ensuring appropriate waste
management (e.g., sorting, storage, collection, transport, recycling, disposal) and conserva-
tion of a clean living environment; Specific Household Appliance Recycling Act: Enacted in
June 1998 for the purpose of ensuring appropriate waste management and
efficient material usage through obliging the retailers to collect and transport the specific
household appliance (e.g., TV sets, refrigerators, air conditioner, electric washers) and the
manufactures (including importers) to recycling them. The Act will be enforced by June 2001;
Law concerning Special Measure for Promotion of Utilization of New Energy: Enacted to ac-
celerate the introduction of new energy for achieving the FY 2010 targets; There are, in addi-
tion, standards and regulations that apply. These include: The Waste Management and
Resource Recovery Section of the Council for Industrial Structure established guidelines by
item (23 items at present) and industry (11 industries at present) in 1990, and has stimulated
the industry sector to voluntarily engage in waste management and resource recovery.
The Basic Environment Plan developed under the provisions of the Basic Environment Law
stipulates reducing amount of wastes generated and promoting recycling. It also identifies
the roles of producers, retailers, consumers, and national and local governments. Various
councils of the Government and the local authorities have discussed issues relating to sus-
tainable consumption and production patterns. These councils consist of the representatives
of various groups of the society such as the academy, industries, etc. so as to opinions of
various groups of the society are reflected to the policies.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 59
Programmes and Projects: Environmental Activities Evaluation Programme is a pro-
gramme that the Ministry of the Environment has been promoting since 1996 in an effort to
help various businesses, especially small- and medium-sized enterprises to conduct such
environmental activities as self-check of the environmental impacts and preparation of action
plans, are provided in this programme. Eco-Mark Programme is designed to enhance con-
sumers to choose environmentally sound products through provision of product
information on environmental aspect. A product allowed to bear the Eco-Mark shall satisfy
the qualification that the burden on environment passed through each stage of manufactur-
ing, using and disposing of this particular product is less compared to the other similar prod-
ucts. Working groups composed of experts, establish criteria for qualification.
Status: The Basic Environment Plan decided in 1994 by the Cabinet stipulates that a target
for waste management and recycling should be developed promptly. For this purpose, a
study on this subject has been conducted. By the Law for Promotion of Utilization of Recy-
clable Resources, designated industries are required to recycle more wastes and by-
products in the manufacturing processes. Targets set for recycle of waste paper and cullet
are fifty-six percent by 2000 and sixty-five percent by 2001 respectively. The targets of sew-
erage construction, for example, are the increases in the percent of population served with
sewer system up to sixty six percent and in the number of population served with advanced
wastewater treatment up to fifteen million by the end of FY2002. The Law Concerning the
Promotion of Procurement of Eco-friendly Goods and Services by the State and Other Enti-
ties (Law on Promoting Green Purchasing) fully came into force from FY2001. The Govern-
ment is to implement green purchasing based on the law to encourage other sectors to follow
them, and finally to change their consumption pattern. In most cases, the cost of
environmentally sound technologies is higher than existing technologies. Financial measures
including subsidy, or reduction of interest of the loan for plant investment, are very effective
means of diffusing such technologies. Exhibitions of clean and environmentally sound
technologies give good opportunities to spread such technologies.
Capacity Building, Education, Training and Awareness-Raising: The Government, rec-
ognizing that it is itself a big consumer, enacted Law on Promoting Green Purchasing to
achieve sustainable consumption and production patterns. In order to comprehensively and
systematically promote the green purchasing by the government, the government determined
the basic policy including the list of the kinds of eco-friendly goods, etc. with their evaluation
criteria for which the government should put an emphasis on procuring. The Eco-Mark Pro-
gramme is operated to inform consumers of environmentally friendly goods. The following
are examples of measures taken by the government to encourage industries to adopt pro-
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 60
duction patterns that affect the environment less: Environmental Activities Evaluation Pro-
gramme: The Programme has been promoted since 1996 in an effort to help various busi-
nesses, especially small- and medium-sized enterprises, understand and implement envi-
ronmental activities; and, To disseminate the design and construction method on thermally
insulated buildings, public service corporations give short courses for carpenters: As a follow-
up action, the organization has been making efforts to help its members to follow the action
plan and take environment awareness into consideration when they act. The Government
encourages consumers to implement sustainable consumption patterns by offering a
“household eco-account book”. The Government has been undertaking an awareness-raising
campaign in cooperation with local governments and other sectors, to promote sustainable
consumption, for example, through newspapers, magazines, TV programmes, and other
various media. In 1998, the Recommended List of Specifications and Quality of Goods was
developed to encourage the implementation of the Action Plan for Greening Government
Operations.
Information: The basic policy based on the Law on Promoting Green Purchasing could be
used as a reference for decision makers and industry managers in procuring products. A
study of comprehensive environmental indicators, including ones related to consumption and
production patterns is in progress. Research and Technologies: The Government has been
promoting research and development on life-cycle assessment to find method to evaluate the
environmental impacts of a product throughout its product life, i.e. extraction of raw materials,
manufacture, and consumption and disposal of it. Reduction of wastes generation and the
promotion of recycling is the most prioritized area to exert efforts. Improvement of energy ef-
ficiency is also an important area.
Financing: The FY 1998 budget for the introduction of New Energy is 74.8 billion yen; in
FY1999, the approximately budget request will increase to 87.5 billion yen. Budget for Intro-
duction of New Energy Most of the subsidies are financed by the national budgets. Remitted
taxation is also used as effective means to supply economical merits.
Cooperation: The Government and local authorities support developing countries by intro-
ducing less environment-affecting techniques in production. For example: Japan is promoting
the “Japan-China Environment Cooperation for the 21st Century", which includes measures
aiming at the building of circulatory industrial and social systems in China.
Decision-Making: The following ministries/agencies are generally responsible for making
decisions: Ministry of Economy, Trade and Industries (METI), concerning energy issues
in general; the Ministry of the Environment (MOE), concerning protection of atmosphere;
and the Ministry of Land, Infrastructure and Transport (MLIT), concerning energy-related
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 61
aspects of transportation. As for the climate change issues, Global Warming Prevention
Headquarters consisting of ministries and agencies concerned with global warming problems
has served the policy coordination mechanism among them since 1997. The principal laws
are: Law Concerning the Promotion of the Measure to Cope with Global Warming, Law con-
cerning the Rational Use of Energy and Air Pollution Control Law. Regulations that promote
sustainable energy are included in the Law concerning Special Measure for Promotion of
Utilization of New Energy. The law was enacted to accelerate the introduction of new energy
for achieving the FY 2010 targets and prescribes for the following: (1) Formulation and an-
nouncement of basic policies on new energy use, and (2) financial support measurement for
businesses which use new energy. The Revised Law concerning the Rational Use of Energy
and the Law Concerning the Promotion of the Measures to Cope with Global Warming came
into effect in April 1999. The Basic Environment Plan addresses such energy-related issues
like: Increasing energy and material efficiency in production processes, promoting use of new
and renewable sources of energy, and using environmentally sound technologies for sus-
tainable production. In response to global warming problems, the government of Japan
adopted the Guideline of Measures to Prevent Global Warming in June 1998, which de-
scribes required measures in energy policies to curb the GHG emissions. The council for en-
ergy policy never fails to ask public comments before making decisions. Some of the NGOs
and consumer groups have initiated environmental bookkeeping accounting campaign by
checking the amount of energy consumption of households and offices and hence saving the
energy.
Capacity-Building, Education, Training and Awareness-Raising: In July 1999, the National
Center for the Promotion of Activities to Cope with Global Warming was designated by the
Ministry of the Environment and this center services the information on environment-friendly
products and so on. In December 1998, the first Global Warming Prevention Month was
celebrated. At each school, students learn about these aspects through educational activities
carried out in such classes as Social Studies, Science, Home Economics and Moral Educa-
tion. Guideline of measures to Prevent Global Warming, adopted in 1998, highlights the im-
provement of education and learning relating to environment and energy (nuclear energy,
energy saving etc.). In terms of enhancing safety of handling nuclear materials, Japan Nu-
clear Cycle Development Institute (JNC), a representative research institution for nuclear en-
ergy, has set up special internal training courses, such as “Course for Safety Education for
Managers” and “Course for Training for designating those who are engaged in the Work
dealing with Radiation” for their technical staff. These courses aim at providing them with op-
portunities for obtaining common and basic technology necessary for the work in JNC. The
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 62
“Eco-Drive” Programme is implemented for the public awareness of the efficient use of the
automobile.
Information: The Ministry of Land, Infrastructure, and Transport (MLIT) is authorized to col-
lect data on energy consumption under the Law of Statistics from each transportation mode
to derive the total consumption of the transport sector. The Ministry of Land, Infrastructure
and Transport annually edits and publishes the CP2002 Survey on Transport Energy as a
governmental publication. The Survey on Transport Energy is published by the government
as a printed publication. Japan has been disseminating information on international negotia-
tions concerning the UNFCCC and the Kyoto Protocol.
Research and Technologies: The Government has been promoting research and devel-
opment on life-cycle assessment to find a method to evaluate the environmental impacts of a
product throughout its whole life. Reduction of waste generation, promotion of recycling and
improvement of energy efficiency are priority areas. The diffusion of solar batteries was pro-
moted by governmental subsidy in particular for the installation of solar panel on household
roof so that the total subsidy amounted to 10.4 billion yen, for the generation of 12 thousand
kW. The number of wind power generation plants is rapidly increasing in recent years to
about 200 in 1999. Research and development project on direct utilization and utilization by
means of gasification and liquefaction of woody biomass as an energy source is being im-
plemented. A wastewater treatment system was developed by an application of a new meth-
ane fermentation method, i.e. up flow anaerobic sludge blanket (UASB) method for the
wastewater from animal barn. The system requires only half electricity in comparison with a
conventional method. Energy generation system by dry-type methane fermentation method
has also been developed. Demonstration scale plants are now being operated for the evalua-
tion of the practicability of these processes. High sugar producing crops for production of
ethyl alcohol were developed. The diffusion of so called 'Cogeneration' system supplying
electricity and heat simultaneously is also an important progress Japan made since UNCED.
In 1998, the total installations amount to 1,051 and the total capacity amounts to 3.7 million
kW. Solar batteries of which Japan has advanced technology are popular in small appliances
such as electric calculators. Research and development project on utilization of woody bio-
mass is expected to be over by 2004 with operational level technology.
2.2.6 Integrated environment and development in decision making
In June 1996, the Japan Council for Sustainable Development was established. The
Council, consisting of representatives from the government, industry and NGOs, aims at fa-
cilitating dialogue among the members concerning the issues of Sustainable Development.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 63
As an advisory body to the Government, it is mandated to follow up on the progress of
measures taken under the Plan every year. In the areas of institutional and legal framework,
in November 1993 Japan enacted the Basic Environment Law, which serves as a basis for
Japan's environmental policy. The law articulates basic principles of environmental policies,
which are: (1) enjoyment and succession of environmental blessings; (2) creation of a sus-
tainable society which imposes less burden on the environment; and (3) international coop-
eration for the conservation of the global environment.
The law also provides for the roles of the national and local governments, and those of the
private sector and citizens. The Environmental Impact Assessment Law was enacted in
1997, and put in full force and effect in 1999. By this law, Japan has improved old EIA sys-
tem under administrative guidelines, etc. New system introduced the procedure of screening
and scooping, extended the opportunity for hearing public opinion, and so on. In addition,
Japan concretely studies contents and methods regarding how to consider environmental
conservation in the stage of policies and plans that provide frameworks for the design and
implementation of individual projects, after analyzing the current problems. Besides, the na-
tional and local governments accumulate their actual experiences on such considerations,
and examine efficacy and effectiveness of them. Based on this process, a guideline in terms
of environmental consideration in the stage of policies and plans shall be established. In ad-
dition to establishing environmental quality standards regarding air pollution, water pollution,
soil pollution and noise, Japan has devised measures, including regulations for the discharge
of substances, which cause environmental pollution as well as regulations on land-use for
the sake of conserving the natural environment, based on individual laws such as the Air Pol-
lution Control Law, the Water Pollution Control Law and the Nature Conservation Law.
Japan's efforts toward the implementation of Agenda 21, as outlined below, are principally
based on two action plans, namely, the National Agenda 21 Action Plan and the Basic Envi-
ronment Plan, which were formulated in 1993 and 1994 respectively. Japan has been pro-
moting and will further develop various measures in accordance with the provisions of these
plans. The National Agenda 21 Action Plan was completed in December 1993. The
Plan lists various policy measures, which need to be taken, consistent with the programme
areas as provided in Agenda 21. In accordance with the provisions of the Basic Environment
Law, the first Basic Environment Plan was established in December 1994, and the new Plan
was formulated and adopted by the Cabinet in December 2000. The new Plan prescribes the
same four long-term objections as the old one, namely, environmentally sound material cy-
cle, harmonious coexistence, public participation, and international activities, with a view to:
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 64
• Building a socio-economic system fostering environmentally-sound material cycles,
where environmental load from human activities is minimized
• Securing a harmonious coexistence between humankind and diverse wildlife and the
natural environment
• Ensuring participation of all the members of society in environmental conservation ac-
tivities and
• Enhancing international activities.
The Plan also identifies outlines of the policies, the roles of each entity of the society, and the
use of various policy instruments to achieve the objectives. The Law Concerning the Promo-
tion of Procurement of Eco-friendly Goods and Services by the State and other entities fully
came into force in April 2001. The law is to establish the necessary provisions to encourage
green purchasing by the Government and so on to establish society, which can enjoy Sus-
tainable Development. To promote environmentally sound land use, Japan has successively
formulated the National Land Use Plans (National Plans). As the basic policy for economic
management, the “Social and Economic Plan for Structural Reforms - Towards a Vital Econ-
omy and Secure Life" which contains various measures for the resolution of global environ-
mental problems, was prepared. Considerations have been given to the environment in such
areas as regional development, based on the provisions in Article 17 of the Basic Law for
Environmental Pollution Control (1967), and Article 5 of the Nature Conservation Law (1972).
Article 19 of the Basic Environmental Law (1993) states that the State shall consider envi-
ronmental conservation when formulating and implementing measures which may influence
the environment.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 65
Figure 29: Important agencies for data collection on environment protection, energy and Cir-
cular Economy
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 66
2.3 Netherlands
2.3.1 Situation of the environment
Most emissions are falling, but many environmental targets are not being met under current
policies emissions are decreasing too slowly. Although pressure on the environment is falling
or stabilising, and environmental quality is improving, many environmental targets are not be-
ing met on time (Table 7). The chances of meeting many European emission targets (emis-
sion ceilings) for 2010 are about 50%. Under currently adopted policies it is expected that
European quality standards will most likely not be achieved. Eco-efficiency in the Nether-
lands improving technological improvements are raising eco-efficiency: the relationship be-
tween the profitability of a sector and its emissions is becoming increasingly favourable. Im-
proving eco-efficiency is necessary, but not sufficient for reducing total emissions. In virtually
all sectors eco-efficiency for acidifying compounds has improved so much since 1990 that
emissions are decreasing despite economic growth (Figures 30 and 31). Dutch eco efficien-
cies for SO2 and NO2 are among the best in Europe. In contrast, Dutch CO2 eco efficiency
is not so good: The Dutch economy consumes more energy than the European average
consumption. Emissions of all pollutants except CO2 are currently decreasing, while the
economy is growing. The total cost of reducing pressure on the environment has more than
doubled since 1990, and environmental costs account for 3% of the Dutch gross domestic
product (GDP), almost twice as high as the average for the EU-15.
Figure 30: Trends in emissions from production sector
Source: Netherlands Environmental Assessment Agency, 2005
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 67
Figure 31: Trends in emissions, environmental quality, achievement of policy targets
for 2010 and expenditure on the environment (in millions of euros per year, 2004
prices).
Source: Netherlands Environmental Assessment Agency, 2005
Figure 32: The effects of Dutch national policies and foreign emission reductions on
achieving the Kyoto commitment.
Source: Netherlands Environmental Assessment Agency, 2005
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 68
Figure 32 shows the effects pf climate protection policy in the Netherlands and the gap,
which is still open with regard to the targets set by the Kyoto protocol. The government is try-
ing to close the remaining gap by buying foreign emission certificates. This on the other
could be a chance for Circular Economy in China as there are many Kyoto protocol projects,
which can create cheap and sustainable certificates.
2.3.2 Material Flow policy in the Netherlands
The aim an economy wide material flow policy is to enhance dematerialisation of the econ-
omy by reducing resource input into the society by maintaining or even increasing the GDP.
Materials extraction, production, use and waste are inevitably associated with a whole gamut
of environmental problems, varying from climate change, acidification and dispersion of toxic
substances through to loss of biodiversity. Depletion of renewable, living resources like tim-
ber and fish is also a serious environmental issue. Cutting back material flows can therefore
help enhance environmental quality across the board.
The economic activities of production and consumption in the developed nations have unin-
tended environmental repercussions in the developing world. While industries in the devel-
oped world must today meet stringent environmental standards, acquisition of raw materials
from further afield is subject to virtually no such conditions. Over the past four decades, there
has been a major transfer of polluting upstream activities such as mining to the developing
countries, which are often wrenching their own environment for the sake of our prosperity.
These environmental impacts, which are not currently accounted for in product prices, can be
addressed by an economy wide material flow policy.21
Taken from these two reasons for material flow policy the following general objective
for an economy wide material flow policy can be given:
“The aim of an economy wide material flow policy is to reduce the cradle to grave environ-
mental impact of natural resource use, irrespective of where that impact occurs.”
Dematerialization, i.e. reducing the amount of materials used per functional unit of a
product or service, possibly by increasing product lifetime.
Materials substitution, i.e. replacing environmentally damaging materials with more benign
alternatives reuse and recycling, i.e. increasing use of secondary materials where this helps
reduce environmental impact. The Netherlands Ministry of Housing emphasizes that reduc-
21 see: de Bryun et al 2004, p.4
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 69
ing the magnitude of material flows – dematerialization – is here viewed as just one of the
possible strategies that might be employed in an economy wide material flow policy. Figure
33 shows the role of a material flow policy in the broader environmental policy context.
Figure 33: Status of material flow policy in the broader environmental policy context
Source: De Bryun, S.M., Sevenster, M.N., Warringa, G.E.A. et al: Economy Wide material flows and
environmental policy: An analysis of indicators and policy uses of economy-wide material flow policy,
Delft, CE 2004.
Environmental
policy
Emissions
policy Soil policy Climate
policy
Biodiversity
policy
Materials policy
Emissions and
waste policy
Reuse and recycling
(waste) policy
Input environmentally
friendly materials
(product policy)
Dematerialization
(efficiency policy)
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 70
2.4 USA
In previous conference speech by Angela Leith22 from the US Environmental protection
Agency a new vision fort he USA was presented: moving focus from waste management to
materials management. The following lines will give data about the waste situation in the
USA for the year 2003. Based on this some new ideas for a cradle to cradle system are in-
troduced with the following key aspects:23
• Considering life cycle of products whole supply chain and end of life
• Focusing on front of pipe solutions (e.g. product design)
• Engaging stake stakeholders
• Stimulating consumer demand for greener products
• Providing framework for safe management
US is benefiting from many of the actions taken by countries like Japan (3 R strategy) and
EU member states (WEEE). Ms Leith marked her speech as Circular Economy and the 3 R
initiative. As mentioned above for a more sustainable and more comprehensive use of the
term Circular Economy it is important to include energy, land water into CE systems. This so
far is still missing in the EPA approach.
Figure 34: Planned cradle to system of EPA
Source: Leith, Angela H: Circular Economy and
the 3R Initiative: US Approach,
Milan conference, October 2005
22 Leith, Angela H: Circular Economy and the 3R Initiative: US Approach, 2005
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 71
2.4.1 Waste Management
Despite sustained improvements in waste reduction, household waste remains a constant
concern because trends indicate that the overall tonnage we create continues to increase.
Since 1980 the total generation of MSW has increased more than 50 percent to its 2003 level
of just over 236 million tons per year - topping 2002 by more than a half million tons. Exclud-
ing composting MSW recovered for recycling rose to more than 55 million tons, about a 3-
percent increase over 2002. Composting recovered almost 17 million tons.
Recycling and Composting programs for MSW: Around 8875 curbside recycling pro-
grams existed nationwide, down somewhat from 9700 in 2001 and about 3227 community
composting programs were operational, a slight decrease from 2001 figures. The decrease in
recycling and composting programs may be the result of some consolidation of curbside re-
cycling programs and fewer states reporting composting data.24 The total MSW recovery
rate, which includes both recycling and composting, was just over 30 percent in 2003 (see
Tables 7, Figures 34, 35). In 2003, the individual MSW generation rate has remained rela-
tively constant since the 1990s at 4.5 pounds per person per day. The recycling rate was just
over 1 pound per person per day. After accounting for what recycled, about 3 pounds per
person per day was discarded in 2003 (Table 8). In 2003, recycling and composting diverted
more than 72 million tons from disposal. Paper and paperboard recovery rose to 40 million
tons. Metals were recycled at 36 percent, and electronic products had about a 10 percent re-
cycling rate. Consider the significance of these figures today, compared to 1980 when only
10 percent of all MSW was recycled and the rest was disposed. Clearly, it is recycling more
and discarding less. Waste disposed of in combustors and landfills is seen in Figures 36. In
2003, around 33 million tons (14 percent) were combusted, and about 131 million tons (55
percent) went to landfills or were otherwise disposed of.
23 Leith, Angela H: Circular Economy and the 3R Initiative: US Approach, 2005 24 EPA 2005
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 72
Table 7:
Source: EPA: MSW Generation, Recycling, and Dis-
posal in the United States: Facts and Figures for
2003, Washington 2005
Table 8:
Source: EPA: MSW Generation, Recycling,
and Disposal in the United States: Facts and
Figures for 2003
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 73
Figure 35: Waste generation 1960 to 2003
Source: EPA: MSW Generation, Recycling,
and Disposal in the United States: Facts and
Figures for 2003
Figure 36: Development of recycling activities from 1960 to 2003
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 74
Source: EPA: MSW Generation, Recycling,
and Disposal in the United States: Facts and
Figures for 2003
Figure 37:
Source: EPA: MSW Generation, Re-
cycling, and Disposal in the United
States: Facts and Figures for 2003
Sources of MSW include both, residential and commercial locations. It was estimated that
residential waste (including waste from apartment houses) account 55 to 65 percent of total
MSW generation. Waste from schools and commercial locations, such as hospitals and busi-
nesses, constitutes 35 to 45 percent of MSW. Local and regional factors, such as climate
and level of commercial activity, contribute to the variations. MSW is analyzed in two ways:
The first is by material (paper and paperboard, yard trimmings, food scraps, plastics, metals,
glass, wood, rubber, leather and textiles, and other); the second is by major product catego-
ries. Product categories include durable goods (like furniture and appliances), nondurable
goods (products meant for disposal), containers and packaging (like milk cartons, cardboard
boxes, plastic wrap) and other wastes (like food scraps and yard trimmings).
2.4.1.1 Materials in MSW
Organic materials continue to be the largest components of MSW: Paper and paperboard
products account for 35 percent of the waste stream, with yard trimmings and food scraps
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 75
together accounting for about 24 percent. Plastics comprise 11 percent, metals make up 8
percent and rubber, leather and textiles account for about 7 percent. Wood follows at 6 per-
cent and glass at 5 percent. Finally, other miscellaneous wastes made up approximately 3
percent of the MSW generated in 2003. A breakdown, by weight, of the MSW materials gen-
erated in 2003 is provided in Figure 37.
Figure 38: Origin of waste by percentage in 2003
Source: EPA: MSW Generation, Recycling,
and Disposal in the United States: Facts and
Figures for 2003
Some material from each MSW category was recycled or composted in 2003. The highest
recovery rates were achieved in yard trimmings, paper products, and metal products. About
56 percent - or about 16 million tons - of yard trimmings were composted, representing al-
most a four-fold increase over 1990. About 48 percent of paper and paperboard were recy-
cled. Nearly 7 million tons, or about 36 percent, of metals were recycled. Recycling rates (re-
covery as a percent of generation) for all material categories in 2003 are listed in Table 9.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 76
Table 9
Source: EPA: MSW Generation, Recycling,
and Disposal in the United States: Facts and
Figures for 2003
The breakdown, by weight, of product categories generated in 2003 is shown in Figure 38.
Containers and packaging made up the largest portion of waste generated, about 75 million
tons. The second-largest portion of MSW was nondurable goods, comprising just over 26
percent. Durable goods make up the third largest segment, accounting for almost 40 million
tons.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 77
Figure 39:
Source: EPA: MSW Generation, Recycling,
and Disposal in the United States: Facts and
Figures for 2003
The generation and recovery of the product categories in MSW in 2003 are shown in Table
10. This table shows that recovery of containers and packaging was the highest of the three
product categories, recycling almost 39 percent of containers and packaging. Aluminium,
steel, and paper products were the most recycled materials by percentage in this category.
Nearly 44 percent of all aluminium beverage cans were recycled, while almost 61 percent of
steel packaging (mostly cans) was recovered. About 48 percent of paper and paperboard
was recycled. This figure includes corrugated containers that had a 71 percent recycling rate.
Around 22 percent of glass containers were recycled, while about 15 percent of wood pack-
aging - mostly wood pallets - was recovered for recycling. Nearly 9 percent of plastic con-
tainers and packaging were recycled, which were mostly soft drink, milk and water bottles.
Plastic milk bottles were the most recycled materials, accounting for roughly 32 percent.
Plastic soft drink bottles were recovered at a 25 percent rate. Overall recovery of nondurable
goods was 31 percent in 2003. Paper products, such as newspapers and high-grade office
papers were the most recycled materials. Newspapers alone were recycled at a rate of about
82 percent. Around 56 percent of high-grade office papers, 33 percent of magazines and 32
percent of junk mail were recovered. Slightly more than 18 percent of books, almost 16 per-
cent of telephone directories and nearly 13 percent of other commercial printing products,
accounted for additional recycled paper materials in 2003.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 78
Table 10
Source: EPA: MSW Generation, Recycling,
and Disposal in the United States: Facts and
Figures for 2003
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 79
Clothing and other textile products are included in the nondurable goods category. These
products were recovered for recycling or export at a rate of 16 percent. Overall, approxi-
mately 18 percent of durable goods were recovered in 2003. Nonferrous metals other than
aluminium had one of the highest recovery rates, at nearly 67 percent, due to the high rate of
lead recovery from lead-acid batteries. Recovery of steel in all durable goods was 30 per-
cent, with high rates of recovery from appliances and other miscellaneous durable goods.
Lead-acid batteries were one of the most recovered products in 2003, with a recycling rate of
93 percent. Other products with particularly high recovery rates were steel from major appli-
ances (about 90 percent), corrugated boxes (about 71 percent), newspapers (about 82 per-
cent), steel cans (60 percent), and aluminium beverage cans (about 44 percent). Around 10
percent of selected consumer electronics, including computers, TVs, stereos, cell phones
and similar equipment, were recycled. The percent of rubber in tires that was recovered for
recycling was almost 36 percent. Other tires were retreated and shredded rubber tires were
also used as fuel, or burned for energy recovery.
Figure 40: Composition of waste
Source: EPA: MSW Generation, Recycling,
and Disposal in the United States: Facts and
Figures for 2003
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 80
Figure 41: Waste treatment in 2003
Source: EPA: MSW Generation, Recycling,
and Disposal in the United States: Facts and
Figures for 2003
Table 11: Waste generation, treatment and recovery in Mio tons from 1960 to 2003
Source: EPA: MSW Generation, Recycling,
and Disposal in the United States: Facts and
Figures for 2003
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 81
Table 12: Waste generation, treatment, and recovery in percentage of tons from 1960
to 2003
Source: EPA: MSW Generation, Recycling,
and Disposal in the United States: Facts and
Figures for 2003
2.4.1.2 The RCRA (Resource Conservation and Recovery Act) vision paper 25
The RCRA vision paper provides ideas and proposals for waste and materials management
in the year 2020 in the USA. In 2020 materials that were once considered wastes suitable
only for landfilling are now continually reused and recycled and industrial ecology has be-
come the mantra of corporate executives across the nation. Landfills are becoming
obsolete – the small volumes of waste that actually need disposal are carefully managed un-
der an efficient and environmentally protective system that features a mix of economic incen-
tives, voluntary measures, and regulatory controls. Cleanup of most contaminated sites has
been largely completed, and thousands of areas once known as brownfields have been put
back into productive use.
In 2006 the USA still is a very inefficient energy consuming waste disposing society as the
previous figures above clearly shows. The RCRA vision therefore needs a lot of explanations
and strategy tools to become true in 2020.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 82
New goals for RCRA 2020
a. Reduce waste and increase the efficient and sustainable use of resources
b. Prevent exposures to humans and ecosystems from the use of hazardous chemicals
c. Manage wastes and clean up chemical releases in a safe, environmentally sound
manner. As discussed under Goals 1 and 2, a fully realized transition from a RCRA
style waste management program to a broader waste/materials management system
has the potential for substantially reducing the volumes and toxicity of wastes gener-
ated by the USA businesses and households. Unfortunately, US industry and con-
sumers are not yet as efficient as nature at materials use and are unlikely to become
so in the next few decades.
Tools and strategies to achieve the goals of RCRA 2020
• Economic tools: reduce current subsidies and incentives, which encourage
the use of virgin raw materials; Taking steps to create economic incentives for
recycling and reuse, and using renewable resources.
• Informational and technical innovations may also be effective
• New regulatory strategies might be needed
In fashioning the new waste management strategy the authors of beyond RCRA contemplate
the need to address the question of how and at what point in a materials life cycle would the
material be considered as waste. In German waste management law this is clearly defined at
the point where the consumer wants to dispose of the material.
Under an integrated waste / materials management system, the current gradle to grave ap-
proach would be supplanted by gradle to gradle strategies where previous waste basically is
considered to be valuable materials.
25 EPA United Staes Environmental Protection Agency: Beyond RCRA. Waste and Materials Management in the Year 2020,
Washington DC 2003.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 83
2.5 European Union
With regard to Circular Economy developments in Germany, Netherlands, Austria or other
countries, it is important to look at the role and the strategies of the European Commission.
Environmental policy may consider Circular Economy as a part of EP is a mayor field of
activity of the European Commission. Directives and regulation from the EU has to be imple-
mented by all EU member states. Therefore the 6 Environmental Action Programme of the
Commission, which intends to develop a thematic strategy for the sustainable use of re-
sources should be looked at closer in this report. Three strategic components evolve to be of
importance to the EU - knowledge gathering, policy assessment and policy integration.
The objectives and measures for eventually integrating resource management in other policy
areas will be based on the first preceding steps. The most important political innovation of
the resource strategy will be that it connects different resource-related policies that are usu-
ally dealt with isolated approaches and policies with three interrelated initiatives:
a. The Resource Strategy 26
b. The Integrated Product Policy 27
c. The Strategy on the Prevention and Recycling of Waste 28
The proposals for the strategy are not yet as precautionary as the approaches of some of the
EU Member States and other industrialized countries such as, for example, Japan. The pre-
cautionary approach accepts that resource consumption of industrialized countries is too
high. As any impact on the environment results from resource use this approach supposes
that a general decrease of resource use will result in an overall reduction of negative envi-
ronmental impacts. In contrast to this approach some proponents of the resource strategy
wish to be more accurate. They suppose that not the overall quantity of resource consump-
tion, but only certain qualities of the industrial metabolism need to be controlled. This ap-
proach can be more specific and targeted. The drawback is that it further delays action, be-
cause there is not enough information available on the ecological impacts of the industrial
metabolism. If one intends to explore environmental impacts, it is questionable whether the
knowledge gathering and the improvement of impact assessments will take place in an ac-
26 COM (2003) 572 27 COM (2003) 302 28 COM (2003) 301
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 84
ceptable time frame. In relation to the decades it took to understand the ecological impacts of
single molecules such as PVC, CO2, CFCs the complete mapping of the physical throughput
and potential impacts might require at least (another) 30 years. In this phase of the strategic
debate there is room for both “fuzzy” operationable principles for immediate precautionary
action as well as a long-term mapping of the resource use and its impacts. Further refine-
ment of impact assessment will have to consider requirements of leaner governance and
faster economic decision-making as intended by the EC 29
It could happen that the developed methodologies will be costly or complex.
On the one hand, complex and time-intensive impact assessments could ultimately lead to
the same conclusions for designing policies as directionally safe win-win objectives promot-
ing a general decoupling. On the other hand, lean and rapid impact assessments will most
likely deliver random results most sensitive to political influence by non-scientific interests.
Immediate precautionary action is possible, because there has been enough knowledge
gathering on the “hot spots” that accelerate environmental degradation. From a life-cycle
perspective, environmental impact potentials in conjunction with resource use are highest in
the consumer fields “housing”, “food”, and “mobility”.30
Also the bottleneck of progress is recognized since the Global Assessment of the 5th Envi-
ronmental Action Programme: not the traditional environmental policy has failed, but primarily
the integration of environmental requirements in other policy areas. The “hot spots” of envi-
ronmental pressure are created by driving-forces influenced primarily not by environmental
but other policies. Therefore sustainable use and management of natural resources have to
be integrated in the principles e.g. of the EU’s trade, fishery or industry policy. Therefore,
knowledge gathering is more required to specify how a resource strategy can be imple-
mented and coordinated across the different sectors and various governance levels (vertical
and horizontal policy integration). For achieving this aim special attention needs to be di-
rected towards sectoral integration strategies, 31 but also to overarching, cross-sectoral EU
policy processes. Most of all, the EU has to adapt its economic policy in order to further de-
couple resource consumption from economic growth. For a systemic resource management
there are basically three different intervention points (Bringezu).
1.) Resource extraction or imports
29 Commission (COM (2002) 276) 30 see e.g. Moll et al. 2004, van der Voet et al. 2003, Tucker et al. 2004, Institut Wallon de développement économique et social
et d’aménagement du territoire/Vlaamse Instelling voor Technologisch Onderzoek 2002, BIO Intelligence Service/O2 France
2003 31 see SOEOR, 2005, Subreport 5 on policy integration
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 85
2.) Production and consumption
3.) Waste Management
A strategy for the sustainable use and management of natural resources will have to connect
all three intervention points. Important will also be the system borders. In a globalised econ-
omy, the limiting of the perspective on Europe, will not be appropriate as resource input,
waste outputs and problem shifting have global dynamics.
The Lisbon process could be a starting point for achieving better policy coherence.
2.5.1 Sustainable use and management of natural resources
and the Lisbon Process
At the Summit in Lisbon in March 2000 the Council declared the new strategic goal for 2010:
the European Union should become the most competitive knowledge-based economy of the
world with sustainable economic growth and more and better employment opportunities and
greater social cohesion. The Sapier Report 32 has formulated an agenda of how such a strat-
egy can be pursued in a growing Europe. Pelkmans/Cassey (2004) add useful analysis for
the level of the Member States. Our study proposes to link the Lisbon process with the EU
resource strategy.
Quantitative targets and timetables completed the new “Leitbild” of Lisbon. The chosen struc-
tural indicators for monitoring the socio-economic progress developed into a central instru-
ment of political controlling in the European Union. According to the Feira European Council
in June 2000 the Commission is expected to table for each Spring Council a so-called syn-
thesis report based on the structural indicators and benchmarks.
The decision established a central indicator-based monitoring and reporting tool for political
decision-making and assessment. A preliminary list of 35 indicators, which the Commission
and Council had decided upon in November 2000, was based on a Council decision of
March 2000. In its Communication on the structural indicators of November,33 the European
Commission explains that the choice of the indicators was based on preceding processes. A
large share of the indicators had already been presented in the framework of the so-called
„Broad Economic Policy Guidelines“. The result presented to the 2002 Council in Nice is ac-
32 Sapier et al. 2003 33 COM (2000) 594
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 86
cording to the Commission a comprehensive summary of the most important performance
indicators. During the selection of indicators the following criteria had been considered: 34
• Easy to read and understand
• Policy relevant
• Mutually consistent
• Available in a timely fashion
• Comparable across Member States and, as far as possible, with the US
• Selected from reliable sources
• The data requirement should not impose too large a burden on Member States and
enterprises
The structural indicators will be used for two purposes: 35
1. Monitoring progress, both in achieving the identified targets and in implementing poli-
cies
2. Assessing the effectiveness of policies.
In its communication the Commission admits that the first goal can be achieved rather easily,
but the performance evaluation of measures will be a greater challenge, since it is based on
an understanding of the relation between action and measured results.
There is a tension between simplification and differentiation. On the one hand, indicators
have great advantages:36 “Simple and objective quantitative policy and performance indica-
tors can play an important role in highlighting problems, measuring progress in achieving the
targets identified, guiding policy makers in their policy efforts, and focussing public attention
on what is at stake”. On the other hand, the evaluation has to take place in the framework of
the synthesis report to avoid over- and misinterpretation. Some data are only comparable to
a very limited degree. In March 2001 the Stockholm European Council expanded the scope
of the structural indicators from purely socio-economic objectives to sustainability. In particu-
lar the heads of state and governments wanted to know about the contribution that the envi-
ronment technology sector could make to promote growth and employment. Since Stock-
holm, the areas for the synthesis reports are:
1. Employment
34 COM (2000) 594, p.9 35 COM (2000) 594, p. 5 36 COM (2000) 594, p. 6
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 87
2. Innovation
3. Economic reform
4. Social cohesion
5. Environmental aspects of sustainable development.
In October 2001 the Commission proposed environmental indicators, which were approved
in December 2001 by the European Council in Laeken, so that the Commission could al-
ready present an integrated synthesis report with altogether 42 structural indicators in spring
2002. In comparison with the version from September 2000, the indicators of first four policy
areas and the structural indicators were only slightly modified while the environmental as-
pects of Sustainable Development were a completely new area. Six areas reflect the eco-
logical dimension of the EU Sustainable Development Strategy:
1. Energy
2. Climat protection
3. Transport
4. Environment
5. Health
6. Natural resources
It was already agreed in Laeken that the environmental indicators would need further refine-
ment. For this purpose a so-called “open list” with a core set of environmental headline indi-
cators was developed. The integrated environment indicators as well as the open list should
be followed-up according to the political priorities of the Union. In 2003 the Italian Presidency
reversed the openness of the spring reporting. The list of 42 indicators was drastically re-
duced to 14. Instead of seven only three indicators should help to monitor the environmental
dimension of the Sustainable Development Strategy.
The 2004 Spring Report includes the indicators:
• Total greenhouse gas emissions
• Energy intensity of the economy
• Volume of freight transport relative to GDP
Altogether the Spring Reporting is a positive policy innovation. It helps to see the different
dimensions of European integration and can thus contribute to more policy coherence. Get-
ting “the big picture” might also be necessary with regard to the considerable expansion of
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 88
the European Union in very heterogenous regions. Nevertheless, the Lisbon process should
monitor sustainable use and management of natural resources. Here, material flow based
indicators have to find a place. This view is also supported by a recent OECD Council rec-
ommendation.37 Crucial for integrating resource strategy in the Lisbon agenda is whether it
will be possible to explain how this contributes to the paramount objective of the Union: to
become the most competitive knowledge-based society. The mid-term evaluation of the Lis-
bon process in spring 2005 will probably indicate insufficient progress in meeting the social,
economic and environmental objectives. The mid-term evaluation could therefore be a stra-
tegically important opportunity to demonstrate that real progress can be achieved by exploit-
ing the environmental dimension of competitiveness and job creation. According to Ecotec
(2002) the eco-industry contributes to a fast growing market with a volume of about 550 Bil-
lion EUR. According to the US Department of Commerce the growth rate in western industri-
alized countries in 1998/1999 was about 7 - 9 %. At the same time in developing market
economies the turnover grew by 10 - 17 %. Even in times of economic stagnation, the growth
of this sector is relatively stable. In Germany, for example, DESTATIS has confirmed a
growth rate of the eco-industry by 3.7 % during 2001. The export of the German eco-industry
even grew by 19.3 %. The world market for eco-products and services is dominated to 85%
by the USA, the EU and Japan. The European Union holds about one third of the world mar-
ket. From 1997 - 1999 the profit from global trade of the EU was about € 5 billion. Ecotech
(2003) estimates the eco-industry’s share of total employment in the EU to be about 1.3 %. It
is recommendable to evaluate these numbers against highly volatile sectors such as the me-
dia or IT-sector in order to find out the most significant growth and employment opportunities.
The growth of the eco-sector in the CEE has already outnumbered South-East-Asian growth
rates. In this context it would also be recommendable to learn from the accession of the for-
mer GDR in order to avoid unnecessary economic risks, because overcapacities of environ-
mental end-of-pipe infrastructure can contribute to decrease competitiveness.
• Increased competitiveness through cost-savings
The drawback of growth rates in the eco-industry is that this primarily relates to end-of pipe
technology (to a lesser but increasing extend also renewable energy). End-of-pipe technol-
ogy leads to abatement costs. They express economic, health and ecological risks that need
to be overcome technologically. Like the health care system growth rates of the eco-industry
express ultimately the existence of risks. For a better quality of life and lower production
37 OECD 2004
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 89
costs it would be more desirable to prevent health and ecological risks from occurring rather
than repairing them with often expensive technology. Therefore, it is wiser to take more pre-
cautionary and preventive actions. The disadvantage of these more intelligent approaches is
that it seems to be impossible to empirically show the economic benefits. This has an impor-
tant statistical reason (“integration paradox”): Once management of natural resources is inte-
grated in the mainstream corporate controlling it is not anymore considered to be “eco”, but
“business as usual”. Therefore, the above mentioned estimates of Ecotec (2000) do not re-
veal the true contribution of environmental policies to economic growth, which is also charac-
terized by a general improvement of resource efficiency in the producing sectors. Although
systematic research in this field is lacking, the Wuppertal Institute has statistical evidence
that costs of resource use are often more relevant for competitive production costs than the
labour costs. Today in Germany in addition to the costs the simple availability of resources
becomes a crucial point for companies. The structure of the manufacturing industry in Ger-
many shows that costs for material and energy make up 50% of the total costs of companies,
labour costs constitute about 20%, other costs another 20%, and depreciation rent make up
10% of the total costs. 38
As a result material efficiency is the key factor for reducing life cycle costs. Nonetheless, the
public discussion is focusing on personnel costs, which account only for 23% of total costs.
In order to maintain and increase competitiveness, industry continuously seeks to increase
the material efficiency. Existing methods to increase materials efficiency are for example ‘de-
sign-to-competitiveness’ and ‘zero loss management’. ‘Design-to-competitiveness’ aims at
the reduction of customers’ cost of non-quality and maintenance by modifying design specifi-
cations. ‘Zero loss management’ is a zero-based budgeting approach toward materials effi-
ciency in production processes that aims on the reduction of material and energy losses. It
has been effectively applied in a variety of industries. The two methods together are esti-
mated to increase the material efficiency up to 20%. 39
However, incentives and coordination are needed to exploit these potentials and to shift the
technology frontier. The issue of unemployment brings out the macroeconomic relevance of
material efficiency. The labour productivity relative to the GNP has continuously been in-
creasing for the past 30 years. In fact, material and energy productivity are also increasing,
but much slower than labour productivity. Economic policies should therefore be designed to
give more incentives to increase the productivity of material and energy use rather than to
further increase labour productivity, which usually results in less employment. This insight is
38 Fischer 2003
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 90
not new, it has been already recognized in the early 1990ies by the so-called “Delor White
Paper on Growth, Competitiveness and Employment”.
Sustainable Development calls for a new economic development model. The current devel-
opment model seems to be extremely inefficient in using the primary production factors, la-
bour and nature: “The serious economic and social problems the Community currently faces
are the result of some fundamental inefficiencies: an ‘under-use’ of the quality and quantity of
the labour force, combined with an ‘over-use’ of natural and environmental resources. … The
basic challenge of a new economic development model is to reverse the present negative re-
lationship between environmental conditions and the quality of life. 40 A study has tried to
model the effects of dematerialization on economic growth, employment and state budget in
Germany. If cost-savings are re-invested into R&D and engineering strategies, a 2.3%
growth, additional 750 000 jobs and decreased public spending on social welfare would be
attainable. 41
• Increased competitiveness of eco-efficient products and services
This economic drive for natural resource savings will increase due to long-term scarcity of
strategic resources. This will not only improve eco-efficiency on the European supply side,
but also increase the demand for eco-efficient technology, especially in countries that are in
the resource-intensive phase of early industrialisation. In April 2004 economic analysts were
commenting the exploding market prices for commodities. The booming economy in Asia
mainly in China is soaking precious resources towards East Asia, which results in soaring
commodity prices.
By systematically exploring potentials for natural resource savings the EU could considerably
lower production costs and contribute to the WSSD Global Deal by reducing further depletion
of natural resources. Especially with the new Member States the potentials for saving natural
resources are considerable. The average energy and materials intensity of the new EU-
Member States surpass the average EU 15 values by almost a factor 4 to 5. In other words:
80% of the energy in the new Member States is wasted or 5 times more value added can be
created out of a ton of materials according to normal EU-15 standards! The fact that the EU-
15 energy consumption can be decreased again by a factor 4 by applying state of the art
technology gives an impression of the vast room for improvements. The potential for increas-
ing materials resource productivity are even higher. As the example from Weilerbach in
39 Fischer 2003 40 COM (1993) 700 41 Fischer et al. 2004
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 91
Germany shows, alone the energy saving potentials sum up to at least 50%. By saving natu-
ral resources rather than human resources the EU could indeed become the most competi-
tive knowledge-based society with growing employment opportunities. The systematic firing
of people often makes less economic sense than investing in eco-efficiency and demateriali-
sation. This could considerably increase competitiveness especially against countries which
oppose precautionary approaches. Along these lines policies will have to be formulated and
indicators for monitoring need to be chosen. To this end it is not only necessary to compare
the energy and materials intensity of each country, but to complement this information by an
indicator of the total material requirement of each Member State.
2.5.2 Options for a resource policy
Resources already pose significant costs to industry. Pursuing the usual environmental pol-
icy aim of internalising negative externalities does not have to start from scratch. Policies can
concentrate on proper legal and economic incentives that do not harm the economy and on
those effects that are not yet internalised. One should also bear in mind that prevailing envi-
ronmental policy has turned out to perform better in economic terms than many sceptic ob-
servers tend to believe42. Because resources already pose significant costs to industry, one
can also expect existing property rights and management tools that ought to be strengthened
by comprehensive policies. In that regard, incentives for the generation of knowledge on re-
source management can be seen as a key to better performance. A current lack of property
rights and policies can be observed in some regions where resource extraction takes place
(Miranda et al). This deficit leads to negative environmental impacts, especially in those re-
gions. EU policies are needed to address that issue in various ways:
• Firstly, the accession countries and Eastern Europe should be supported in formulat-
ing and implementing policies addressing sustainable resource extraction.
• Secondly, developing countries should gain some support for their sustainable use
and management of natural resources, too.
• Thirdly, the EU will have to avoid a possible problem shifting from extraction proc-
esses within its strong jurisdiction to other regions in the world where resource extrac-
tion may pose lower costs and lead to negative externalities. African countries, China,
but also Australia can be seen as some resource exporting regions, which ought to
be monitored and addressed by EU.
Possible Resource Policies include the following options:
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 92
1. Incentives for “Value chain management” within industries: This can be seen as a starting
point since resources are predominantly managed by industries. Incentives may include re-
porting mechanisms, promoting the concept of ‘producer responsibility’, accounting require-
ments, etc.
2. Coordinated programmes for market diffusion of eco-efficient products and services (simi-
lar to programmes known from the energy sector, see also Environmental Technology Action
Plan 43
3. Coordinated R&D programmes for system innovation. The emerging EU Technology Plat-
forms on fuel cells and hydrogen can be seen as starting point for similar options regarding
resources. They address the need for coordinated system innovation and roadmaps beyond
incremental improvements and diffusion of best practices.
4. EU data bank on MFA and resource use data and indicators, to be harmonized interna-
tionally and open for corporate and individual access. This could be a task for the future
ETC-WMF in accordance with EUROSTAT and OECD. It is fully in line with what has been
said about the importance of knowledge gathering in the communication by the European
Commission (2003: pp. 24 ff.) and above. One should note, however, that this implies a fo-
cus of knowledge gathering on resource management and on the access to data on material
flows rather than on the environmental impacts of single resource use patterns. Both aspects
are indeed not in contradiction, but from a policy point of view the former focus is perhaps
closer to the ETAP and Lisbon than impact analysis.
5. A European Network of ‚Eco-Efficiency Agencies’ (see www.ea-nrw.de. Agencies can play
a good role for disseminating good practices, as a clearinghouse between professional con-
sultants and firms, and as a mechanism for increasing knowledge on sustainable resource
management. Given that small and medium-sized companies and various regional legal
frameworks are of importance, regional agencies and a European network among them
seems superior to any possible European agency.
6. A binding target for resource productivity plus a target for resource use: Targets for re-
source productivity exist already in some member states (e.g. Germany, see Table 3-2). The
policy issue now can be seen in formulating an EU target, discussing an allocation on mem-
ber state level, coming to terms with self commitments of industry or any legally binding re-
quirements. In that regard, one should also keep in mind possible conflicts within the concept
of sustainable growth: Increasing resource productivity can go along with increasing resource
42 CEC 2004 43 COM (2004) 38
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 93
use if the overall economic growth rate exceeds productivity increase. It seems thus desir-
able to formulate a sub-target for resource use that ensures an absolute decoupling from
economic growth at EU level.
7. Whether and how sectoral targets should be formulated also deserves further attention.
Resource policies might also start with negotiated agreements on action in certain branches
monitored by independent bodies according to OECD guidelines. Experiences with transition
management (e.g. in The Netherlands) could be evaluated in this regard.
8. Economic incentives are surely an option for possible resource policies. The debate as
such is well-known.3 Important for resources is the acknowledgement that some member
states have already adopted raw material taxes 44 Further policy options may include a Mate-
rial Input Tax or tradable permits for the use of certain strategic resources.
9. Mechanisms for supporting sustainable use and management of natural resources in re-
source exporting countries. It may come as a surprise that these options entail many ‘soft’
options where information and knowledge are a key rather than command-and-control of in-
dustries. The main reason for that approach stems from the analysis that industry will gain
self-interest in sustainable resource management and that current policies from EU and its
member states can be used as points of departure (Jordan et al. 2003). Nevertheless, much
policy attention will have to be devoted to formulate strategies for increasing resource pro-
ductivity and to overcome scepticism (Bleischwitz et al, 2004, p.59).
2.5.3 Recommendation of the Council on Material Flows and Resource
productivity towards the European Policy Committee (EPOC)
The Council on Material Flows and Resource productivity recommends that member coun-
tries:
(I) Take steps to improve information on material flows, including its quality and relevance for
environmental management, in particular:
• Develop methodologies to enhance knowledge of material flows within and among
countries
• Consolidate and improve data collection concerning material flows within and among
countries
• Develop tools to measure resource productivity and economy-wide material flows,
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 94
including appropriate estimation methods, accounts and indicators;
(II) Further develop and use indicators to better integrate environmental and economic
decisionmaking, and to measure environmental performance with respect to the
sustainability of material resource use;
(III) Promote the development and use of material flow analysis and derived indicators at
macro and micro levels;
(IV) Link environmental and economic related information through work on material flows,
stocks and flows of natural resources, environmental expenditure, and macro-economic
aspects of environmental policies;
(V) Co-operate to develop common methodologies and measurement systems of material
lows, with emphasis on areas in which comparable and practicable indicators can be defined,
drawing on work already done at national and at international level.
The Council on Material Flows and resource productivity instructs the Environmental Policy
Committee:
(I) To support and facilitate member countries' efforts to improve information on material
flows and related indicators, including through exchange of information on national and
international innovative experiences;
(II) To continue efforts to improve methods and indicators for the assessment of the
efficiency of material resource use in important areas;
(III) To develop a guidance document to assist member countries in implementing and using
common material flow accounts;
(IV) To carry out these tasks in co-operation with other appropriate OECD bodies and other
international organisations to prevent duplication and reduce costs;
(V) To report to the Council on progress achieved by Member countries in implementing this
recommendation, within three years of its adoption.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 95
3 International circular economy development policy summary
and analysis
Taken the above description of EU, Germany, Netherlands, Japan and the USA in account it
becomes obvious that there are different approaches and different strategies towards a new
and more efficient resource society. The term Circular Economy is most widely used in
China. If it comes to politics neither of the other states claims to become a Circular Economy.
Germany and Netherlands as well the European Commission seem to have the more holistic
approach toward a sustainable society, which as a matter of fact includes a Circular Econ-
omy. In their Sustainable Development strategies not only waste and waste management is
in the focus but also other important aspects of ecosystem management like biodiversity, wa-
ter protection, land use and as a very important aspect social criteria. These holistic ap-
proaches towards a sustainable society are implemented through many different, segregated
laws. China is using the term Circular Economy is trying to develop a law for implementing it.
Japan already ha a law for establishing the recycling based society stemming from the year
2000. Some developed countries such as Germany, Japan, and the USA are to some differ-
ent degree engaged in legislation related to Circular Economy. Germany being the first
county to enact a kind of CE law which actually mainly focuses in the waste management
field. Germanys closed substance cycle law of course was a highlight of resource policy and
the EU landfill regulation which was imposed in Germany in June 2005 maybe is the most
resource redirecting policy step ever implemented in Germany. With the phasing out of land-
fill for untreated waste Germany and gradually all Europe starts steering towards a resource
conscious country and continent.
Japan has a perfect law system on Circular Economy, which covers each field of production
and life. There are eight laws in the system among which the law on formation and promotion
of Circular Economy enacted in 2000 is the most typical. According to Lu et al (2005) this law
makes Japan stand out in Circular Economy policy implementation. On the other hand the
Circular Economy law in Japan is very much based on waste and waste management. But
as we learned from the CE theory aside form waste the whole ecological aspects of material
flow including energy has to be considered.
Though the USA has no comprehensive law on Circular Economy, its law on resource pro-
tection and reclamation, and pollution prevention, has somehow embodied the thought of
Circular Economy. Given the waste statistics mentioned in chapter 2 the USA nevertheless is
still struggling with a modern innovative overall resource recovering waste management. The
fact that more than 8000 recycling programs existed in 2003 and more than 3000 composting
plants were operating in the USA sounds good. But a real Circular Economy is a much more
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 96
comprehensive and clean technology as well as sufficiency oriented policy and strategy.
They yet have to develop energy saving recycling systems and abandon the uneconomic,
energy wasting and environment damaging way of disposing waste in landfills or wasting en-
ergy on transports and composting. At least in a strategy paper (beyond RCRA) EPA special-
ists already think about abandoning the term waste and switching to the term resources.
There is no evidence so far on systemically involving the energy and material flow aspects
into the new waste management strategies as it is becoming business as usual in Germany
and other European countries like Austria and the Netherlands.
As aside from Japan the European Commission seems at least in theoretical terms to be the
most advanced region with regard to developing a resource efficient society the following
lines give a more detailed inside view on the strategic discussion within the EU.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 97
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 98
Abbreviations
ACS Association of Caribbean States
AMCEN Africa Ministerial Conference on the Environment
AMU Arab Maghreb Union
APEC Asia-Pacific Economic Cooperation
ASEAN Association of Southeast Asian Nations
CARICOM The Caribbean Community and Common Market
CBD Convention on Biological Diversity
CIS Commonwealth of Independent States
CGIAR Consultative Group on International Agricultural Research
CILSS Permanent Inter-State Committee for Drought Control in the Sahel
CITES Convention on International Trade in Endangered Species of Wild Fauna and Flora
COMESA Common Market for Eastern and Southern Africa
CSD Commission on Sustainable Development of the United Nations
DESA Department for Economic and Social Affairs
ECA Economic Commission for Africa
ECCAS Economic Community for Central African States
ECE Economic Commission for Europe
ECLAC Economic Commission for Latin America and the Caribbean
ECOWAS Economic Community of West African States
EEZ Exclusive Economic Zone
EIA Environmental Impact Assessment
ESCAP Economic and Social Commission for Asia and the Pacific
ESCWA Economic and Social Commission for Western Asia
EU European Union
FAO Food and Agriculture Organization of the United Nations
FIDA Foundation for International Development Assistance
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 99
GATT General Agreement on Tariffs and Trade
GAW Global Atmosphere Watch (WMO)
GEF Global Environment Facility
GEMS Global Environmental Monitoring System (UNEP)
GESAMP Joint Group of Experts on the Scientific Aspects of Marine Environmental Protec-
tion
GHG Greenhouse Gas
GIS Geographical Information Systems
GLOBE Global Legislators Organisation for a Balanced Environment
GOS Global Observing System (WMO/WWW)
GRID Global Resource Information Database
HIV/AIDS Human Immunodeficiency Virus/Acquired Immunodeficiency Syndrome
IAEA International Atomic Energy Agency
ICSC International Civil Service Commission
ICSU International Council of Scientific Unions
ICT Information and Communication Technology
ICTSD International Centre for Trade and Sustainable Development
IEEA Integrated Environmental and Economic Accounting
IFAD International Fund for Agricultural Development
IFCS Intergovernmental Forum on Chemical Safety
IGADD Intergovernmental Authority on Drought and Development
ILO International Labour Organisation
IMF International Monetary Fund
IMO International Maritime Organization
IOC Intergovernmental Oceanographic Commission
IPCC Intergovernmental Panel on Climate Change
IPCS International Programme on Chemical Safety
IPM Integrated Pest Management
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 100
IRPTC International Register of Potentially Toxic Chemicals
ISDR International Strategy for Disaster Reduction
ISO International Organization for Standardization
ITTO International Tropical Timber Organization
IUCN International Union for Conservation of Nature and Natural Resources
LA21 Local Agenda 21
LDCs Least Developed Countries
MARPOL International Convention for the Prevention of Pollution from Ships
MEAs Multilateral Environmental Agreements
NEAP National Environmental Action Plan
NEPAD New Partnership for Africa’s Development
NGOs Non-Governmental Organizations
NSDS National Sustainable Development Strategies
OAS Organization of American States
OAU Organization for African Unity
ODA Official Development Assistance/Overseas Development Assistance
OECD Organisation for Economic Co-operation and Development
PPP Public-Private Partnership
PRSP Poverty Reduction Strategy Papers
SACEP South Asian Cooperative Environment Programme
SADC Southern African Development Community
SARD Sustainable Agriculture and Rural Development
SIDS Small Island Developing States
SPREP South Pacific Regional Environment Programme
TMR Total Material Requirement
UN United Nations
UNAIDS United Nations Programme on HIV/AIDS
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 101
UNCED United Nations Conference on Environment and Development
UNCCD United Nations Convention to Combat Desertification
UNCHS United Nations Centre for Human Settlements (Habitat)
UNCLOS United Nations Convention on the Law of the Sea
UNCTAD United Nations Conference on Trade and Development
UNDP United Nations Development Programme
UNDRO Office of the United Nations Disaster Relief Coordinator
UNEP United Nations Environment Programme
UNESCO United Nations Educational, Scientific and Cultural Organization
UNFCCC United Nations Framework Convention on Climate Change
UNFF United Nations Forum on Forests
UNFPA United Nations Population Fund
UNHCR United Nations High Commissioner for Refugees
UNICEF United Nations Children's Fund
UNIDO United Nations Industrial Development Organization
UNIFEM United Nations Development Fund for Women
UNU United Nations University
WFC World Food Council
WHO World Health Organization
WMO World Meteorological Organization
WSSD World Summit on Sustainable Development
WTO World Trade Organization
WWF World Wildlife Fund
WWW World Weather Watch (WMO)
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 102
List of References
1. Adriaanse, A., Bringezu, S., Hammond, A., Moriguchi, Y., Rodenburg, E., Rogich, D.
and Schütz, H. (1997): Resource Flows: The Material Basis of Industrial Economies.
Ed. by World Resources Institute, Wuppertal Institute, Netherlands Ministry of Hous-
ing, Spatial Planning, and Environment, National
2. Institute for Environmental Studies, Japan. WRI Report, Washington.
3. Ayres, R. U. (1989). Industrial Metabolism. In Ayres R.U., Norberg-Bohm V., Prince
J., Stigliani W.M. and J. Yanowitz: Industrial Metabolism, the Environment and Appli-
cation of Materials-Balance Principles for selected Chemicals, IIASA report RR-89-
11.
4. Bartelmus, Peter: Dematerialization and Capital Maintenance: Two sides of the Sus-
tainability Coin, Wuppertal Papers No.120 Wuppertal 2002.
5. Bergstedt, E. and Linder, I. (1999): A Material Flow Account for Sand and Gravel in
Sweden.
6. EUROSTAT Working Papers 2/1999/B/4.
7. Berkhout, F. (1999): Industrial Metabolism – Concept and Implications for Statistics,
EUROSTAT Working Papers 2/1999/B/2.
8. Brahms, E., Eder, G., Greiner, B. (1989): Papier-Kunststoff-Verpackungen -Eine
Mengen- und Schadstoffbetrachtung (Paper-plastics-packagings -A look at quantities
and hazardous substances, in German). Berichte / Umweltbundesamt 1/89. Erich
Schmidt Verlag, Berlin.
9. Bringezu, S. (1993): Towards increasing resource productivity: how to measure the
total material consumption of regional or national economies?, Fresenius Envir. Bull.,
8, 437-442.
10. Bringezu, S. (1998): Comparison of the Material Basis of Industrial Economies. In.
Bringezu et al. (Eds.): Proceedings of the ConAccount Conference, 11-12 Septem-
ber, 1997: 57-66.
11. Bringezu, S. (2000): Ressourcennutzung in Wirtschaftsräumen. Stoffstromanalysen
für eine nachhaltige Raumentwicklung. Berlin, Tokyo, New York.
12. Bringezu, S., Behrensmeier, R., Schütz, H. (1997a): Material Flow Accounts - Part I -
General Aspects, Aluminium, National Overall Accounts. Statistical Office of the
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 103
European Communities, Doc. MFS/97/6, 94 pp,
http://www.wupperinst.org/download/index.html.
13. Bringezu, S., Behrensmeier, R., Schütz, H. (1997b): Material Flow Accounts - Part II
– Construction Materials, Packagings, Indicators. Statistical Office of the European
Communities, Doc. MFS/97/7, 87 pp, http://www.wupperinst.org/download/index.html.
14. Bringezu, S.; Behrensmeier, R.; Schütz, H. (1998): Material flow accounts indicating
environmental pressure from economic sectors. In: Uno, K.; Bartelmus, P. (Eds.): En-
vironmental Accounting in Theory and Practice. Kluwer Academic Publishers, Dor-
trecht, Boston, London, pp. 213-227.
15. Bringezu, S., Fischer-Kowalski, M., Klein, R., Palm, V. (1997): Regional and National
Material Flow Accounting: From Paradigm to Practice of Sustainability, Proceedings
of the ConAccount Workshop 21- 23 January, Leiden, The Netherlands.
16. Bringezu, S.; Hinterberger, F.; Schütz, H. (1994): Integrating Sustainability into the
System of National Accounts: The Case of Interregional Material Flows. Proceedings
of the international afcet Symposium "Models of Sustainable Development", Paris,
March 1994: 669-680.
17. Central Environmental Council Planning Committee on Sound Material Cycle Society,
: Fundamental Plan for Establishing a Sound Material Cycle Society, January 2006.
18. Chen, X. and Qiao, L. (2000): Material flow analysis of Chinese economic-
environmental system, Journal of Natural Resources, Vol. 15, No. 1, 17-23. In Chi-
nese with English abstract.
19. Commission of the European Communities, International Monetary Fund, Organisa-
tion for Economic Cooperation and Development, United Nations and World Bank
(1993): System of National Accounts 1993, Brussels/Luxembourg, New York, Paris,
Washington, D.C.
20. EPA: MSW Generation, Recycling, and Disposal in the United States: Facts and Fig-
ures for 2003, Washington 2005.
21. Japanese Ministry of Environment: Background paper for 3R initiative
22. http://www.env.go.jp/earth/3r/outline/bg_paper.pdf (2005)
23. Moriguchi, Y. et al.: Resources flows: The material basis of industrial economies,
World Resources Institute (1997)
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 104
24. European Environment Agency (1999): Making sustainability accountable: Eco-
efficiency, resource productivity and innovation. Topic report No. 11. EEA, Copenha-
gen.
25. European Environment Agency (2000): Environmental Signals 2000, European Envi-
ronment Agency regular indicator report. European Environment Agency, Copenha-
gen.
26. Eurostat (1997): Materials Flow Accounting: Experience of Statistical Offices in
Europe. Directorate B: Economic Statistics and Economic and Monetary Conver-
gence. Luxembourg.
27. Eurostat (1999a): Environmental Accounts 1999 – Present state and future develop-
ment, Doc. ACCTENV/ 99/7, meeting of the Working Party ‘Economic Accounts for
the Environment’, August 1999, Luxembourg.
28. De Bryun, S.M., Sevenster , M.N., Warringa , G.E.A. et al: Economy Wide matrial
flows and environmental policy: An analysis of indicators and policy uses of economy-
wide material flow policy, Delft, CE 2004.
29. De Bryun, S.M., van Soest, J.P.: Resource productivity and policies. A Dutch per-
spective, commissioned by Ministry of VROM, the Netherlands, Delft 2004.
30. EPA,United States Environmental Protection Agency: Municipal Solid Waste Genera-
tion, Recycling, and Disposal in the United States: Facts and Figures for 2003, Wash-
ington April 2005, http://www.epa.gov/msw/msw99.htm
31. Eurostat (1999b): Pilot Studies on NAMEAs for air emissions with a comparison at
European level, Office for Official Publications of the European Communities, Luxem-
bourg.
32. Eurostat (2000): The European Handbook for Integrated Environmental and Eco-
nomic Accounting for Forests – IEEAF, Office for Official Publications of the Euro-
pean Communities, Luxembourg.
33. Federal Statistical Office of Germany – Statistisches Bundesamt (1995): Integrated
Environmental and Economic Accounting – Material and Energy Flow Accounts.
Fachserie 19, Reihe 5. Wiesbaden.
34. Federal Statistical Office of Germany – Statistisches Bundesamt (2000): Integrated
Environmental and Economic Accounting – Material and Energy Flow Accounts.
Fachserie 19, Reihe 5. Wiesbaden.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 105
35. Fischer-Kowalski, M, and H. Haberl (1993): Metabolism and Colonisation. Modes of
Production and the Physical Exchange Between Societies and Nature. Schriftenreihe
Soziale Ökologie, Band 26, Wien.
36. Gravgard Pedersen, O. (1999): Physical Input-Output Tables for Denmark, Statistics
Denmark
37. Gofman, K./Lemeschew M. and N. Reimers (1974): Die Ökonomie der Naturnutzung
– Aufgaben einer neuen Wissenschaft [Economics of utilisation of nature - tasks for a
new science], Nauka I shisn, vol. 6.
38. Isacsson, A., Jonsson, K., Linder, I., Palm, V. and Wadeskog, A. (2000): Material
Flow Accounts – DMI and DMC for Sweden 1987-1997. EUROSTAT Working Papers
2/2000/B/2.
39. Isaksson K.-E. (1993): Talonrakennustoiminnan jätteet [Waste in the construction in-
dustry]. Statistics Finland 1993:7.
40. Jänicke, M., (1997): The Role of MFA and Resource Management in National Envi-
ronmental Policies. In: Bringezu S., Fischer-Kowalski M., Klein R., Palm V., Analysis
for Action: Support for Policy towards
41. Sustainability by Material Flow Accounting, Proceedings of the ConAccount Confer-
ence 11-12 September 1997, Wuppertal, 68-72.
42. Japanese Environmental Agency (1992), Quality of the Environment in Japan 1992.
Tokyo.
43. Juutinen, A. and Mäenpää, I. (1999): Time Series for the Total Material Requirement
of Finnish Economy Summary. Eco-efficient Finland project, Interim report 15 August
1999. University of Oulu, Thule Institute. http://thule.oulu.fi/ecoef.
44. Lu Xupeng, Hu Jie, Wang Shuwei: Government Interventions in Developing a Circular
Economy – what can China learn from Sweden, Master dissertation, University Kris-
tianstad, May 2005.
45. Mäenpää, I. (1999): Towards a sustainable Finnish economy. Results of mixed mate-
rial flows and economic analysis, Paper presented at the VATT seminar on Green-
house gas policy questions and socialeconomic research implications for Finland in a
national and international context, Helsinki 29 – 30.11.1999.
46. Matthews, E. et al. (2000): The Weight of Nations – Material outflows from industrial
economies, World Resources Institute et al., Washington.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 106
47. Meyer, B. and Uno, K. (1999): Global Econometric 3E- Modelling: The System
COMPASS Paper presented at the 1999 International Conference on Mission Earth,
January 17- 20, San Francisco.
48. Miller, R.E. and P.D. Blair, 1985. Input-Output Analysis: Foundations and Extensions.
Prentice-Hall, Englewood Cliffs, New Jersey.
49. Ministry of the Environment (Finland), EUROSTAT (1999): The Finnish Environment.
Material Flow Accounting as a Measure of the Total Consumption of Natural Re-
sources, Helsinki.
50. Moll, S., Femia, A., Hinterberger, F., Bringezu, S. (1999): An Input-Output Approach
to Analyse the Total Material Requirement (TMR) of National Economies. In: Kleijn,
R., Bringezu, S., Fischer-
51. Kowalski, M. and V. Palm (eds.) Ecologicalizing Societal Metabolism: Designing Sce-
narios for Sustainable Materials Management, ConAccount workshop proceedings,
21 November 1998, Amsterdam,
52. CML report 148, Leiden, pp. 39-46,
http://www.leidenuniv.nl/interfac/cml/conaccount/ws-nov98.html.
53. Mündl, A., Schütz, H., Stodulski, W., Sleszynski, J. and Welfens, M.J. (1999): Sus-
tainable Development by Dematerialization in Production and Consumption - Strategy
for the New Environmental Policy in Poland. Report 3, 1999. Institute for Sustainable
Development, Warsaw. 80
54. Netherlands Environmental Assessment Agency 2005. www. rivm.nl.
55. Radermacher, W. and Stahmer, C. (1998): Material and energy flow analysis in Ger-
many: accounting framework, information system, applications. In: Uno, K.;
Bartelmus, P. (eds.): Environmental
56. Accounting in Theory and Practice. Kluwer Academic Publishers, pp. 187-211.
57. Renard, K.G., Laflen, J.M., Foster, G.R. and McCool, D.K. (1994): The revised uni-
versal soil loss equation, in: Lal, R. (ed.), Soil erosion research methods, pp. 105-
126, St. Lucie Press, Delray Beach, Florida, 1994.
58. Rogich, D.G., et al (1992): Trends in Material Use: Implications for Sustainable De-
velopment. Paper presented at the Conference on: “Sustainable Development: En-
ergy and Mineral Resources in the Circum- Pacific Region and the Environmental Im-
pact of their Utilization”. 9-12 March, 1992, Bangkok, Thailand.
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 107
59. Sakai, Shin-ichi: Fundamental Law for Establishing a Sound Material-Cycle Society
and Material Flow Indexes, unpublished paper CCICED 2005
60. Schandl, H. and Schulz, N. (2000): Using Material Flow Accounting to operationalise
the concept of Society’s Metabolism. A preliminary MFA for the United Kingdom for
the period of 1937-1997. ISER Working Papers, Paper 2000-3 Colchester: University
of Essex.
61. Schmidt-Bleek, F. et al. (1998): MAIA – Einführung in die Material-Intensitätsanalyse
nach dem MIPSKonzept (Introduction to the Material-Intensityanalysis according to
the MIPS-concept, in German). Wuppertal Texte. Birkhäuser, Berlin, Basel, Boston.
62. Schütz, H. and S. Bringezu (1993): Major Material Flows in Germany. Fres. Env. Bull.
2: 443-448.
63. Schütz, H. (1997): MFA Germany: Methods, Empirical Results and Trade Issues. In:
Bringezu, S. et al. (Eds.): Proceedings of the ConAccount Workshop, 21-23 January
1997: 173-177.
64. Schütz, H. and S. Bringezu (1999): Use and Relevance of Statistics in an Interna-
tional Material Flow Study, Summary report to Planistat, November 1999
65. Smith, R. (1995): Input-Output Based Waste Accounts: What They Can and Cannot
Do. In: BEA (ed.): Second Meeting of the London Group on Natural Resource and
Environmental Accountings- Conference Papers, Washington, D.C.
66. Smith, R. and contributors (1999): Physical Statistics/Accounts/Indicators - Recom-
mendations for a Revised SEEA. In: IFEN (ed.): 5th Annual Meeting of the London
Group on Environmental Accounting - Proceedings and Papers, Olréans.
67. Stahmer, C.; Kuhn, M.; Braun, N. (1998): Physical Input-Output Tables for Germany,
1990. EUROSTAT Working Papers 2/1998/B/1.
68. Strebel, Heinz: Industrial recycling networks as an entrance into circular economy; In-
ternational summer Academy on technology Studies – Corporate Sustainability, Graz,
69. Steurer, A. (1992): Stoffstrombilanz Östereich 1988. Schriftenreihe Soziale Ökologie,
Band 26. Institut für Interdisziplinäre Forschung und Fortbildung der Universitäten
Innsbruck, Klagenfurt und Wien, Wien.
70. Steurer, A. (1996): Material Flow Accounting and Analysis: Where to go at a Euro-
pean Level. In: Statistics Sweden (ed.): Third meeting of the London Group on Natu-
Circular Economy related international practices and policy trends
© Prof. Dr. Peter Heck (2006) 108
ral Resource and Environemntal Accounting – Proceedings Volume, Stockholm, pp.
217-221.
71. United Nations (1976): Draft guidelines for statistics on materials/energy balances -
UN document E/CN.3/493
72. United Nations (1999): Integrated Environmental and Economic Accounting – An Op-
erational Manual, New York.
73. USGS - United States Geological Survey (1994 to 1997). The Mineral Industry of (a
range of countries like United Kingdom, Germany etc.). Download from:
htttp://www.usgs.org/minerals.usgs.gov./minerals/pubs/country/(AtoZ).
74. Vaze, P. and Balchin, S. (1998): The pilot United Kingdom environmental accounts.
In: Vaze, P and Barron, J.B. (eds.): UK Environmental Accounts 1998, Office for Na-
tional Statistics, London, pp. 7-40.
75. von Weizsäcker, E.U., Lovins, A., Lovins, H., (1997): Factor Four. Doubling Wealth,
Halving Resource Use. Earthscan, London.
76. Wernick, I. K.,.et al (1996): Materialization and Dematerialization: Measures and
Trends, Daedalus: The Liberation of the Environment, Volume 125, No. 3: 171-198.
77. Brown, Lester R.: Eco – Economy. Building an Economy for the Earth, London 2001
78. ECON: Circular Economy – An interpretation; ECON Memo no 2004-053, project no
20116, O slo 2004.