CINETENSION2 SERIES · Elite Screens Inc. |Elite Screens EuropeG mbH| Etile Screens Inda i |E lite...

PRODUCT WHITE PAPER http://www.elitescreens.com

1 Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.

Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia

CINETENSION2 SERIES Section 1: Screen Design 1.1 What is it for?

CineTenison2 is a robust and well made electric motorized projector screen. A full IR/RF, RJ45 and 5-12 volt trigger control package is included.

1.2 How does it work? Its tab-tensioned material provides uniform flatness and has a wide viewing angle. The 1.0 gain material is also 4K Ultra HD and active 3D ready. It drops and retracts by means of a powerful tubular motor and its sliding installation brackets ensure a perfectly centered installation.

Section 2: Product Features 2.1 Characteristics

Screen Material

• 160° wide viewing angle

• 4K Ultra HD, Active 3D, and HDR Ready

• Standard 4-side black masking borders

• Available in the following range of diagonal sizes

• 84" - 150" in 4:3 format

• 84" - 135" in 16:9 format

• 96" - 153" in 2.35:1 format

Design and Installation

• Floating installation brackets provide easy alignment with wood studs to accommodate a

wall or ceiling installation

• Black Aluminum housing with enamel coating is moisture resistant (white housing for 180"

version)

• Shipped ready to plug & play with installation kit containing brackets, screws, and bubble

leveler included

• Optional in-ceiling trim kit - sold separately

• Optional extended 11x4 or 12x8 L brackets - sold separately

Control System

• Standard Infrared (IR) and Optional ZR800D IR Universal Learning Remote system

• Standard Radio Frequency (RF) remote control operates screen from 100 feet away

• Low-voltage detachable 3-way wall switch for in-line control

• Extended IR "eye" sensor for in-ceiling Infrared operation




• Wireless 5-12 volt trigger included for synchronized screen operation with the projector's

power cycle

• RJ45 port allows 3rd party control system integration

• Optional ZR800D IR Universal Remote Control and In-wall switch available - sold separately

Quality and Reliability

• Tubular motor allows swift operation with a superior weight tolerance and operational

lifespan

• Certified by AMX and CRESTRON

• Conforms to ANSI/UL STD. 60950-1

• Certified to CAN/CSA STD. C22.2

• 2-year Parts & Labor manufacturer's warranty

• 3-year warranty offered through ENR-G program (Education, Non-Profit, Religious and

Government)

2.2 Model Numbers

Model Number Diag.

Size

Aspect

Ratio

Viewing

Height

(in)

Viewing

Width

(in)

Screen Material Gain Case

Color

N.W.

(lbs)

G.W.

(lbs)

Packing Dims.

(LxWxH)

TE110HW2-A1080P2 110" 16:9 53.9 95.9 AcousticPro1080P2 1.0 Black 47.2

64.8

120.8"x7.5"x9.8"

TE100HC2 100" 16:9 49.0 87.2 CineGrey 1.0 Black 45.9

61.2

110.0"x7.5"x9.8"


73.4

141.8"x7.5"x9.8"


57.8

103.3"x7.5"x9.8"

TE100VW2 100" 4:3 60.0 80.0 CineWhite® 1.1 Black 43.0

59.5

103.5"x7.5"x9.8"

TE100VW2-E12 100" 4:3 60.0 80.0 CineWhite® 1.1 Black 44.5

59.5

103.5"x7.5"x9.8"

TE103C-E24 103" 2.35:1 40.3 94.8 CineWhite® 1.1 Black 43.2

59.5

130.0"x7.5"x9.5"

TE106XW2-E24 106" 16:10 56.2 89.9 CineWhite® 1.1 Black 41.4

56.9

115.0"x7.5"x9.5"

TE116XW2 116" 16:10 61.5 98.4 CineWhite® 1.1 Black 50.3

68.8

123.0"x7.5"x9.5"


65.5

120.7"x7.5"x9.5"


68.3

139.8"x7.5"x9.5"

TE128XW2-E12 128" 16:10 67.8 108.5 CineWhite® 1.1 Black 47.4

66.1

133.5"x7.5"x9.5"


70.6

132.8"x7.5"x9.8"


74.9

151.5"x7.5"x9.5"


75.6

141.8"x7.8"x9.5"


77.2

145.7"x7.5"x9.8"


82.4

165.5"x7.5"x9.5"

TE84HW2 84" 16:9 41.2 73.2 CineWhite® 1.1 Black 36.9

54.5

97.1"x7.9"x9.8"




TE84HW2-E30 84" 16:9 41.2 73.2 CineWhite® 1.1 Black 38.5

55.4

98.2"x7.9"x9.8"


42.0

94.0"x7.3"x8.5"


52.9

103.3"x7.5"x9.8"


55.1

113.0"x7.5"x9.5"


41.0

89.4"x6.7"x9.0"

TE100VG2 100" 4:3 60.0 80.0 PowerGain 1.8 Black 43.0

59.5

103.5"x7.5"x9.8"

TE84HG2 84" 16:9 41.2 73.2 PowerGain 1.8 Black 27.0

41.5

94.0"x7.3"x8.5"


39.4

89.4"x6.7"x9.0"

TE92HG2 92" 16:9 45.1 80.2 PowerGain 1.8 Black 42.6

57.8

103.3"X7.5"X9.8"


42.0

94.0"x6.7"x9.0"

TE120HD2 120" 16:9 58.8 104.6 AirBright 3D2 2.0 Black 52.7

70.6

130.0"x7.9"x9.8"

Section 3: Screen Material Specifications 3.1.1 AcousticPro 1080P2 Characteristics

The AcousticPro 1080P2 has a matte white surface with a 1.0 gain that provides excellent color neutrality for superb color reproduction along with wide diffusion uniformity. The angular weave material is designed to allow wall-speaker sound to breathe through the screen while eliminating the visual artifact known as moiré effect. The precision angled mesh of the material allows viewers to enjoy a visually superior presentation with strong color neutrality and artifact-free performance. The material is perfect for use with native 1080P projectors for home cinema and commercial applications.

Features & Benefits • Acoustically Transparent Matte White (angular weave)

• Gain: 1.0 / Viewing Angle: 160° (80° L/R)

• Superb off-axis luminance

• Optimal color neutrality; color shift is not compromised

• Works best with 1080P DLP projectors and 720P (reduces moiré effect)

• Black backing eliminates backlighting artifacts from light bleed-through (only on fixed frame

models)

• Mean attenuation of -2.05dB




3.2.1 CineGrey Characteristics

CineGrey (Tension High Contrast Grey) is designed for low contrast DLP and LCD Home Cinema Projectors. Its superior flatness makes the CineGrey ideal for home theater use. It enhances black levels while minimizing loss in color reproduction. Uniform diffusion surface has black-backing to eliminate light penetration and is easily washable with mild soap and water. *Manufacturer's Tip: if your projector's contrast ratio is more than 2000:1, we recommend you use CineWhite material for a brighter picture.

Features & Benefits

• Multi-layer PVC with texture and surface coating

• Enhances color contrast and black levels

• Gain: 1.0

• View Angle: 160° (80° ±LR)

• Mildew Resistant

• Black backing

• Surface can be cleaned with (water) moist cotton cloth

• Active 3D, 4K Ultra HD, and HDR ready

3.2.2 CineGrey Gain and Viewing Angle Chart

Specifications Thickness 0.3 mm Weight 350 g/m² Maximum Height 3.2 M (10 ft) On-axis Gain 1.0 Half-Gain Angle At 50°




3.3.1 CineWhite® Characteristics

CineWhite® (Tension Matte White) has broad light dispersion through diffusion uniformity, black & white contrast and true color rendition making it the most versatile in Elite's tensions screen product lines. This tension PVC surface is the best choice for today's high-contrast ratio projectors in commercial or residential presentations. The CineWhite® material equals the performance to our MaxWhite® product, but improves the experience with the superior surface flatness. Uniform diffusion surface has black-backing to eliminate light penetration and is easily washable with mild soap and water.

Features & Benefits

• Multi-layer PVC (Polyvinyl chloride) with texture and surface coating

• Gain: 1.1

• View Angle: 180° (90° ±LR)

• Full Lambertian Diffuser- no half gain drop

• Produces exceptional picture quality for any

presentation

• Mildew Resistant

• Active 3D, 4K Ultra HD, and HDR ready

• Surface can be cleaned with (water) moist cotton cloth

3.3.2 CineWhite® Gain and Viewing Angle Chart

Specifications Thickness 0.27 mm Weight 350 g/m² Maximum Height 3.2 M (10 ft) On-axis Gain 1.0 Half-Gain Angle Does not reach half gain




3.4.1 PowerGain Characteristics

The PowerGain is perfect for environments where total ambient light control cannot be attained. This is an angular reflective material that provides crisp color reproduction, black & white contrast and resists hot spotting in the presence of ambient light. The textured pearlescent material has black-backing to avoid light penetration and can be safely cleaned with mild soap and water. *Manufacturer's tip: Use a high resolution-low output DLP projector for the best results with this material.

Features & Benefits

• Multi-layer PVC (Polyvinyl chloride) with texture and surface coating • Gain: 1.8 • View Angle: 120° (60° ±LR) • Mildew Resistant • Black backing • Active 3D, 4K Ultra HD, and HDR ready • Surface can be cleaned with (water) moist cotton cloth

3.5.1 AirBright 3D2 Characteristics

Elite’s AirBright 3D2 is a Polarized 3D silver front projection screen material. It is designed to preserve polarization for passive 3D Dual Projector Systems and has arguably proven itself to be the best solution for three-dimensional home theater presentations. It provides superb brightness and contrast for either a regular 2-dimensional or full-immersion 3D imaging. The material supports 2.0 gain reflectivity with strong black levels and a wide 120° viewing angle. These features make the AirBright 3D2 ideal for professional grade passive 3D applications in either a commercial or residential environment.




Features & Benefits

• Tensioned 3D polarized silver screen surface provides a sharp uniform picture • Active 3D, 4K Ultra HD, and HDR ready • 96% polarization retention • Gain: 2.0 • Wide View Angle: 120° (L&R 60°) • Screen size up to 350" 16:9 in Fixed Frame format • Screen surface can be cleaned with mild soap and water • Mildew Resistant • Custom Sizes available • Perfect companion piece for Airflex5D - 2D/3D Multi-Projector Stacking System to form as

a professional grade passive 3D system. Section 4: Execution 4.1 Important Safety & Warning Precautions

Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will void your warranty. For more information, please contact our Technical Support Department at (877) 511-1211 Ext. 604. • Please retain this user’s guide for future reference.

• To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the

manufacturer.

• Handle the unit carefully during transportation to avoid any damages.

• To ensure safe and reliable operation, direct connection to a properly grounded power source is advised.

• The power outlet supplying power to the unit should be close to the unit and easily accessible.

• Do not install the unit on uneven, inclined surfaces;

• Do not install in damp places to avoid an electric shock or short circuit.

• Do not place any heavy objects over the power cord.

• Position the power cord properly to avoid creating a trip obstacle.

• To avoid an electrical shock or fire, due to a loose contact or short circuit, do not overload the power cord.

• The internal & external parts of this unit are not end user serviceable. Do not attempt to disassemble this

unit by yourself. No one except authorized technicians can open and make repairs to this unit.

• Make sure the power source that this unit is connected to has a continuous power flow.




• If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to avoid

over heat.

• Do not handle the power plug when your hands are wet or your feet are in contact with water.

• Properly dispose of this equipment according to the environmental regulations in your area when product

is no longer of service.

Do not use this unit under the following circumstances.

• Disconnect the power cord under the conditions of heavy rain, wind thunder or lightning.

• Avoid direct sun light, rain shower and moisture.

• Keep away from fire sources and high temperature to prevent this device from overheating.

• Cut off the power supply first before transportation or maintenance.

• To avoid possible injury and/or an electric shock, do not attempt to use this screen if there is obvious

damage or if there are any evident broken parts.

Installation Warning The instructions provided in this user’s guide are for reference only. Please consult a professional installation company for further installation and safety advice. The installer must insure that proper mounting hardware is used to provide adequate strength suitable for the installation. Elite Screens is not liable for any faulty installations. For limit adjustment instructions, please contact our Technical Support Department at (877) 511-1211 Ext. 604 The Screen’s Top Black Drop is already set to its maximum drop distance. There is NO extra top black drop in the roller. Please be aware of this as it will void the limitation of your warranty.

Individual modifications to this product are prohibited and will void the warranty with the manufacturer. Please contact Elite Screens Customer Service for any questions. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur on a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.




Reorient or relocate the receiving antenna of the device which may be casing the interference.

Increase the separation between the screen and the device’s receiver. Connect the equipment into a different power outlet other than the device.

Pre-Installation

1. Carefully unpack the screen.

2. Always handle the screen in a leveled position on a clean surface.

3. In order to protect the screen from exposure to stains, keep the screen out of contact with

foreign particles such as dust, sawdust, and/or liquids.

NOTE:

Regardless of the mounting method, the screen should be securely supported so that the vibration or pulling on the viewing surface will not cause the casing to become loose or fall. The installer must insure the fasteners that are used are of adequate strength and suitable for the installation location.

4.2 Controls and Accessories A. IR Remote B. RF Remote C. Wall switch control box D. 5-12 volt trigger cable

E. IR extended “eye” receiver F. Wireless 5-12v (3.5 mm)

mono trigger cable

G. AAA batteries H. Bubble leveler

4.3 Screen Operation Electric Current: Depending upon region, your Elite Screen will operate on 100v, 110v, or 220v voltage. After ensuring the power outlet & screen are compatible (voltage), plug the power cord into power outlet. Once the screen has power, you’ll be able to control it using any of the 6 methods described below.




3-way Wall switch

3-prong power cable

Red: DC 12 + Green: 0 V -

RJ-45 input for 5-12V Trigger

IR “Eye” Receiver

UP

STOP

DOWN

Fig.1

IR/RF remote

Fig.2

Fig.3

5. 5-12 volt trigger (Item D, Fig 4): The built-in 5-12V trigger input allows your screen to synchronize its drop & rise with the projector’s power cycle. The screen deploys when the projector powers up and will retract when the projector powers down. The 5-12 volt RJ45 cable connects to your projector’s trigger output via a separate cable that may or may not be provided by the manufacturer of the projector. The trigger feature will not work without an output cable from the projector, but it can be tested by connecting the Red (+) and Green (-) cable to a 9-volt battery.

Fig.4

1. IR remote control (Item A, Fig 1): The Infrared functions by direct line of sight contact with a beam range of 30 feet. Aim the IR remote at the circular window located on the left side of the screen 2. IR “Eye” Receiver (Item E, Fig 2): The IR “Eye” Receiver plugs directly into the screen’s RJ-45 input to present a low profile line-of-sight control option for your IR remote control even in a recessed ceiling installation. 3. RF Remote Control (Item B): The radio waves eliminate the need for a direct line of sight with a range of 100 feet. 4. 3-Way Wall Switch (Item C, Fig 3): The 3-way wall switch is a wall mount control box with an up/stop/down button and plugs directly into the screen’s RJ-45 input.

6 ways to control your CineTension 2

5-12 Volt Trigger Cable




6. Wireless 5-12 volt trigger (Item F, Fig 5): The RF remote control serves as a dual purpose, independently as a handheld remote control, or in conjunction with the Wireless 5-12 volt trigger cable. The radio frequency technology can be programmed to send a wireless signal to synchronize its drop/rise with the projector’s power cycle.

4.4 Hardware Parts List A. M12 Dry-wall anchor x 4 or 6 B. Bolt x 2 or 3 C. Masonry Screw x 4 or 6 C. Extruded Hanging Bracket x 2 or 3

120” & above x 3 brackets

4.5 Installation Instructions Wall Screws included with this product are complementary and may not be adequate for all mounting surfaces. Consult with a professional installer or hardware store for proper mounting screws and anchors.

Please consult a professional installer. Elite Screens is not liable for any faulty installations.

DC 5-12V out

The back of the projector

Wireless5-12V trigger cable

UP

Stop

Down

Fig 5

Here’s how to set up your Wireless 5-12 volt trigger | Synchronization Instructions Step1: Connect one end of the 3.5 mm wireless 5-12 volt trigger cable to the RF remote. Step 2: Connect the other 3.5 mm end of the wireless 5-12 volt trigger cable to your projector Step 3: Make sure to unplug your screen from the power outlet Step 4: Hold the UP button on your RF remote Step 5: While holding the UP button, plug the screen back to the power outlet Step 6: Wait 5 seconds and then release the UP button Step 7: Your 5-12V wireless trigger should now be activated with your screen and ready to be used

and able to control your screen with your projector’s power cycle Repeat the steps again if not successful. (Please be aware, the projector on/off cycle may take longer to fully activate. It usually takes around

20-30 seconds for full off and on cycle each time)




1. Insert each Bolt (B) through the right & left slide channel located on the top of the screen’s case. 2. Slide the Extruded Hanging Bracket (D) through the rail located below the slide channel until it

meets with the top of the Bolt (B) and slightly secure the lug-nuts located on the top & bottom of the bolt to attach the bracket.

3. Mark the installation location to drill your hole. Insert the proper screw and secure the bolts to the

bracket. 4. Example of the CineTension 2 installed to a wall, ceiling and enclosed.

Flush mount to

wall Flush mount to

ceiling Enclosed

installation

*Allow 2” of spacing between the front and back of the screen casing.

Top hole for ceiling installation

Back hole for wall installation

A & C

B

A & C

D

PARTS




4.6 Adjusting the Tension String There are adjustment knobs located at the end of the weight bar of the screen. If for any reason the tension

string(s) is loose, you can re-tension it by adjusting the tension string(s) knobs. The tension should be equally

balanced in order to provide a flat, uniform projection surface.

Attention: The screen’s tension has been preset to achieve its best performance. The aforementioned adjustments are typically not required. Prior to making adjustments, please contact Elite Screens for assistance to avoid damaging the screen and voiding your warranty. Section 5: Product Specifications 5.1 Dimensions

Model

Number A A1 A2 A3 B B1 B2 B3 B4 B5 B6 B8 C C1 C2 G1 G2 G3 G4 G5 G6 G7 G8

Unit: Inches

TE110HW2

-A1080P2 113.4 95.9 104.5 108.9 70.4 53.9 63.7 68.4 3.8 4.7 6.7 6 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE100HC2 103 87.2 94.6 98.4 65.5 49 58.8 63.5 3.8 4.7 6.7 6 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE135HC2 135.4 117.7 126.3 130.9 80.7 66.2 74 78.7 3.8 4.7 6.7 4 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE92HC2 96 80.2 87.7 91.5 61.5 45.1 54.8 59.6 3.8 4.7 6.7 6 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE100VW2 96 80 87.5 91.5 76.5 60 69.8 74.5 3.8 4.7 6.7 6 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE100VW2

-E12 96 80 87.5 91.5 82.5 60 75.8 80.5 3.8 4.7 6.7 12 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

Direction of

wrapping thread

Adjusting Knob

Adjustment method: Pull out the

adjusting knob and rotate it to

tighten or loosen tension string. The

direction to tighten/loosen the string

will depend on the direction of the

wrapping thread.

Attention: The string and screen

will lose all tension if the string is

loosened to its maximum. To reverse

this, simply turn the knob in the

opposite direction.




Model


TE103C

-E24 113.4 94.8 103.5 108.9 74.8 40.3 68.1 72.8 3.8 4.7 6.7 24 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE106XW2

-E24 107.2 89.9 97.4 102.7 90.7 56.2 84 88.7 3.8 4.7 6.7 24 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE116XW2 115.4 98.4 105.9 110.8 78 61.5 71.3 76 3.8 4.7 6.7 6 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE120VW2 113.4 96 104.6 108.9 86.5 72 79.8 84.5 3.8 4.7 6.7 4 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE125C-E20 132.3 115 123.7 127.8 79.4 48.9 72.7 77.4 3.8 4.7 6.7 20 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE128XW2

-E12 125.4 108.5 116 120.9 90.3 67.8 83.6 88.3 3.8 4.7 6.7 12 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE135VW2 125.4 108 116.7 120.9 95.5 81 88.8 93.5 3.8 4.7 6.7 4 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE138C-E16 144.3 127 135.6 139.8 80.5 54 73.8 78.5 3.8 4.7 6.7 16 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE139XW2 135.4 117.9 126.5 130.9 88.1 73.7 81.5 86.2 3.8 4.7 6.7 4 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE150VW2 138.2 120 128.7 133.7 104.5 90 97.8 102.5 3.8 4.7 6.7 4 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE153C-E12 158.1 140.8 149.4 153.5 82.4 59.9 75.7 80.4 3.8 4.7 6.7 12 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE84HW2 89.8 73.2 80.7 84.6 57.6 41.2 50.9 55.7 3.8 4.7 6.7 6 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE84HW2

-E30 89.8 73.2 80.7 84.6 81.7 41.2 75 79.7 3.8 4.7 6.7 30 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE92VW2 89.8 73.6 81.1 84.6 71.7 55.2 65 69.7 3.8 4.7 6.7 6 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE94XW2 96 79.7 87.2 91.5 66.3 49.8 59.6 64.3 3.8 4.7 6.7 6 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE96C-E24 105.6 88.3 95.8 101.1 72.1 37.6 65.4 70.1 3.8 4.7 6.7 24 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE84VW2 83.1 67.2 74.7 78 66.9 50.4 60.2 64.9 3.8 4.7 6.7 6 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE100VG2 96 80 87.5 91.5 76.5 60 69.8 74.5 3.8 4.7 6.7 6 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE84HG2 89.8 73.2 80.7 84.6 57.6 41.2 50.9 55.7 3.8 4.7 6.7 6 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE84VG2 83.1 67.2 74.7 78 66.9 50.4 60.2 64.9 3.8 4.7 6.7 6 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE92HG2 96 80.2 87.7 91.5 61.5 45.1 54.8 59.6 3.8 4.7 6.7 6 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE92VG2 89.8 73.6 81.1 84.6 71.7 55.2 65 69.7 3.8 4.7 6.7 6 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

TE120HD2 122.3 104.6 113.3 117.8 73.3 58.8 66.6 71.3 3.8 4.7 6.7 4 4.8 0.9 5.2 3.4 1.9 1.4 0.7 4.1 2.2 0.8 0.4

Unit: mm

TE110HW2

-A1080P2 2880 2436 2654 2766 1788 1369 1618 1737 97 119 170 152 122 23 132 86 48 36 18 104 56 20 10

TE100HC2 2616 2215 2403 2499 1664 1245 1494 1613 97 119 170 152 122 23 132 86 48 36 18 104 56 20 10

TE135HC2 3439 2990 3208 3325 2050 1681 1880 1999 97 119 170 102 122 23 132 86 48 36 18 104 56 20 10

TE92HC2 2438 2037 2228 2324 1562 1146 1392 1514 97 119 170 152 122 23 132 86 48 36 18 104 56 20 10




Model


TE100VW2 2438 2032 2223 2324 1943 1524 1773 1892 97 119 170 152 122 23 132 86 48 36 18 104 56 20 10

TE100VW2

-E12 2438 2032 2223 2324 2096 1524 1925 2045 97 119 170 305 122 23 132 86 48 36 18 104 56 20 10

TE103C

-E24 2880 2408 2629 2766 1900 1024 1730 1849 97 119 170 610 122 23 132 86 48 36 18 104 56 20 10

TE106XW2

-E24 2723 2283 2474 2609 2304 1427 2134 2253 97 119 170 610 122 23 132 86 48 36 18 104 56 20 10

TE116XW2 2931 2499 2690 2814 1981 1562 1811 1930 97 119 170 152 122 23 132 86 48 36 18 104 56 20 10

TE120VW2 2880 2438 2657 2766 2197 1829 2027 2146 97 119 170 102 122 23 132 86 48 36 18 104 56 20 10

TE125C-E20 3360 2921 3142 3246 2017 1242 1847 1966 97 119 170 508 122 23 132 86 48 36 18 104 56 20 10

TE128XW2

-E12 3185 2756 2946 3071 2294 1722 2123 2243 97 119 170 305 122 23 132 86 48 36 18 104 56 20 10

TE135VW2 3185 2743 2964 3071 2426 2057 2256 2375 97 119 170 102 122 23 132 86 48 36 18 104 56 20 10

TE138C-E16 3665 3226 3444 3551 2045 1372 1875 1994 97 119 170 406 122 23 132 86 48 36 18 104 56 20 10

TE139XW2 3439 2995 3213 3325 2238 1872 2070 2189 97 119 170 102 122 23 132 86 48 36 18 104 56 20 10

TE150VW2 3510 3048 3269 3396 2654 2286 2484 2604 97 119 170 102 122 23 132 86 48 36 18 104 56 20 10

TE153C-E12 4016 3576 3795 3899 2093 1521 1923 2042 97 119 170 305 122 23 132 86 48 36 18 104 56 20 10

TE84HW2 2281 1859 2050 2149 1463 1046 1293 1415 97 119 170 152 122 23 132 86 48 36 18 104 56 20 10

TE84HW2

-E30 2281 1859 2050 2149 2075 1046 1905 2024 97 119 170 762 122 23 132 86 48 36 18 104 56 20 10

TE92VW2 2281 1869 2060 2149 1821 1402 1651 1770 97 119 170 152 122 23 132 86 48 36 18 104 56 20 10

TE94XW2 2438 2024 2215 2324 1684 1265 1514 1633 97 119 170 152 122 23 132 86 48 36 18 104 56 20 10

TE96C-E24 2682 2243 2433 2568 1831 955 1661 1781 97 119 170 610 122 23 132 86 48 36 18 104 56 20 10

TE84VW2 2111 1707 1897 1981 1699 1280 1529 1648 97 119 170 152 122 23 132 86 48 36 18 104 56 20 10

TE100VG2 2438 2032 2223 2324 1943 1524 1773 1892 97 119 170 152 122 23 132 86 48 36 18 104 56 20 10

TE84HG2 2281 1859 2050 2149 1463 1046 1293 1415 97 119 170 152 122 23 132 86 48 36 18 104 56 20 10

TE84VG2 2111 1707 1897 1981 1699 1280 1529 1648 97 119 170 152 122 23 132 86 48 36 18 104 56 20 10

TE92HG2 2438 2037 2228 2324 1562 1146 1392 1514 97 119 170 152 122 23 132 86 48 36 18 104 56 20 10

TE92VG2 2281 1869 2060 2149 1821 1402 1651 1770 97 119 170 152 122 23 132 86 48 36 18 104 56 20 10

TE120HD2 3106 2657 2878 2992 1862 1494 1692 1811 97 119 170 102 122 23 132 86 48 36 18 104 56 20 10




5.2 Drawing

5.3 Pictures CineTension2 Front View




Closed Casing Casing/End Cap Detail




Weight Bar Detail Remote Kit Bracket Detail




Life Style




Section 6: About Elite Screens

6.1 Company Description Elite Screens Inc. is a California based company that specializes in making quality commercial and home-theater projection screens for the retail and custom install sales channels. Our company began as an innovative venture into the projection market by manufacturing veterans from the AV/IT industry. Elite Screens quickly established itself as an entry level commercial and home theater screen manufacturer. This was accomplished by making a quality product cost effective with a focus on mass-producing screen material, sizes and aspect ratios that were most commonly preferred by AV customers in general. We focused on uniformity with what would match the mainstream demographic while including extra features that are not usually included by other manufacturers. In time, we progressed from just retail sales into the realm of custom installer/integrator manufacture as our numerous reviews and awards will attest. We stand behind our product and are so certain of customer satisfaction with the quality of our product that we offer a 2-year manufacturer's warranty which is twice the industry standard. In our continued devotion to excellence in products and service, we are committed to implementing green practices with our production. We have adopted manufacturing methods that promote conservative regulation of our energy needs. Our simple product designs combined with the expertise of our permanent staff ensures that our entire line of products are made by experienced hands devoted to the high standards of today’s audio-video consumer.

###

CINETENSION2 SERIES · Elite Screens Inc. |Elite Screens EuropeG mbH| Etile Screens Inda i |E lite...

Documents

Transcript of CINETENSION2 SERIES · Elite Screens Inc. |Elite Screens EuropeG mbH| Etile Screens Inda i |E lite...