CINEMA SYSTEMS 2017 - Knauf Cinema Brochure.pdf · cinema and theatre industry which is currently...
Transcript of CINEMA SYSTEMS 2017 - Knauf Cinema Brochure.pdf · cinema and theatre industry which is currently...
CINEMA SYSTEMS2017
02 -
2017
Cine
ma S
yste
ms
2
Knauf was founded as a family-owned company by the brothers Karl and Dr. Alfons Knauf in 1932 in Germany.
The Knauf Group is present in its native country with numerous companies that manufacture innovative products geared to the applications and various requirements of the modern building materials market.
In their capacity as specialists for problem solutions, these firms, which operate mainly in the dry construction and plastering sectors, market their products worldwide.
Operating more than 220 production sites worldwide, today, Knauf is one of the world’s leading manufacturers of building materials.
Knauf has a workforce of 26,500 in 70 countries and in 2014 the company generated sales was approximately 6.4 billion Euros.
Knauf LLC and Knauf Gypsum India Private Limited are the regional subsidies for the Knauf Group in the Middle East and India providing technical and commercial support, specification, design and training services.
Rajmahal Theatre
3
ContentIntroduction 4Executive Summary 5
7 - 10 Knauf KCUW-A116 Cinema Wall
U-Stud - Cinema Wall System
Knauf KCUW-A116 Cinema Wall, System Details Knauf KCUW-A116 Cinema Wall, System, Technical Data, Description
11 - 14 Knauf KWC-A116 Cinema Wall
V-Brace - Cinema Wall System
Knauf KWC-A116 Cinema Wall, System Details Knauf KWC-A116 Cinema Wall, Systems, Technical Data, Description
15 - 19 Knauf KCC-A113 Ceiling System
Mass Barrier - Cinema Ceiling System
Knauf KCC-A113 Ceiling System Details Knauf KCC-A113 Ceiling System, Technical Data, Description
20 - 21Knauf Cinema Project References22Knauf Training Academy
23Company Certification
24 - 29Knauf AMF Cinema Systems
Page
4
To our Valued Customers,
Greetings!
Knauf is a family name and a corporate group of global dimensions at the same time synonymous with a type of corporate culture which has become rare. Knauf is a typical family firm in spite of its size and this is precisely the reason for its amazing success. It is short and direct decision-making paths, the courage to tackle new ideas, innovations, investments and the wealth of ideas contributed by all Knauf employees that characterize the company.
From its beginnings in gypsum processing, Knauf has expanded and diversified to become a corporation with worldwide activities, Knauf UAE has been active in the Middle East for more than a decade.
Knauf shows its commitment not only in the GCC, headquarters in Dubai UAE, but also in the subcontinent.We have offices based in Saudi, Qatar and India to support the market and dealers.Knauf provides value-added products and services in the following fields:
• Building materials and systems based on gypsum and gypsum-related products• ASTM certified products & systems• Multi- Purpose Joint compounds• Knauf Aquapanel interior and exterior wall systems• Knauf Insulations sustainable, high-performance, cost-effective insulation solutions• Knauf Heradesign’s acoustic designs for Interior and Exterior in ceiling & partition systems• Knauf Integral’s Knauf GIFA Floor, sheet-panelled access floors• Thermal and sound insulation materials• Value engineering and technical consultancy for architects and consultants to meet specified design requirements• On site hands-on training and supervision for contractors when installing drywall systems• Knauf systems are approved by Dubai, Abu Dhabi, Ras Al Khaimah and Qatar Civil Defense
Sustainability is central to our vision of doing the right thing for our clients, our people and the communities in which we work. We maintain and provide certificates for individual products and designs to improve quality and performance. Knauf systems combine innovative products to realize speed of installation and warranted high performance-based systems as per ASTM, EN-BS and DIN Standards.
Knauf is not only committed towards it Products and System but also towards it employees. Within the framework of its four key K-Values; Partnership, Commitment, Entrepreneurship and Menschlichkeit meaning human touch Knauf looks after its people and drives a sense of passion in all its staff. This is what makes Knauf unique and special!
Safety is something that Knauf does not compromise on whether for its products or people and therefore all our products are tested and approved by Intertek to make sure that nothing leaves the plant which is not up to the mark.
Amer Bin AhmedManaging DirectorKnauf GCC & India
Amer Bin AhmedManaging DirectorKnauf GCC & India
Introduction
5
Knauf, at the forefront of innovation and design, has developed a full range of system solutions for the flourishing cinema and theatre industry which is currently taking hold in the UAE and surrounding regions. Beginning in 2014, with a dedicated team, Knauf has successfully progressed from initial system design to direct project implementationsatisfying and exceeding the high performance criteria set by the major cinema operators.
Knauf’s tailor made solutions are fully compliant to ASTM and come in the form of two high acoustic partition systemsand an accompanying false ceiling solution:-
A) U-Stud SystemB) V-Brace SystemC) Mass Barrier Ceiling System
With the ability to achieve wall heights in excess of 18m, Knauf cinema solutions are able to meet the most challenging and versatile of cinema requirements with our fast and easy to install solutions.
Continously striving to improve performance we target all stages of the project from design to project completion,providing bespoke solutions, techncial specifications as well as onsite training and inspections.
With the official public opening of our first completed project, less than a year after initial design, Knaufcontinues to be at the forefront of cinema development. Our commitment and innovation has seen us become amarket leader in the Cinema and Theatre industry in a very short space of time and as the market continues toprosper thus so does Knauf.
Executive Summary
6
Opera House
7
Knauf KCUW-A116 Cinema WallKnauf KCUW-A116 is a heavy duty wall system which is designed to meet the high requirements of sound reduction and fire resistance in modern day cinema partitions.
U-Stud - Cinema Wall System
8
Knauf U-Stud1.0 to 2.0 mm thick
Various sizes are available depending on structural height
100 t
o 250
mm
5754.862173.8
Knauf KCUW-A116 Cinema Wall System
Knauf TB screw(35/45/60/80 Length)
Knauf Hex Head Screw(30 mm)
L - angle 2.5 mm thick(Minimum ange size 60/60 mm)
Connection to Floor(Section/Elevation)
5-10 mm
Varies
Knauf 15.9 Type X Gypsum Board (4 x each side)
Knauf U-Stud proleKnauf TB screw (35/45/60/80 Length)Knauf Base Angle (50x60x2.5 mm)Knauf Approved Fixing
Knauf Insulation Glass Wool
Connection to Ceiling(Section/Elevation)
Varies
Knauf 15.9 Type X Gypsum Board (4 x each side)
Knauf U-Stud proleKnauf TB screw (35/45/60/80 Length)
Knauf Acoustic Head Bracket(Welded to Steel I-Beam)
Knauf Acoustic Head Bracket
Knauf Insulation Glass Wool
50 mm100 mm
Approved Fixing
Knauf Approved Sealant
Fixing to steel/concrete structures using different methods.
Knauf Hex Head Screw
Varie
s
Knauf 15.9 Type X Gypsum Board (4 x each side)
Knauf U-Stud proleKnauf Base Angle (50x60x2.5 mm)
Knauf TB screw (35/45/60/80 Length)
Knauf Joint Compound + Joint Tape
Joint and Stud Reinforcement(Plan/Section)
Knauf Insulation Glass Wool
Knauf Hex Head Screw
Knauf Insulation Glass Wool
Knauf 15.9 Type X Gypsum Board (4 x each side)
Knauf U-Stud proleKnauf Base Angle (60x60x2.5 mm)
Knauf TB screw (35/45/60/80 Length)
Connection to Solid Wall(Plan/Section)
20mm thick x 10mm High min.Firesound Sealant
Knauf Hex Head Screw
Knauf Acoustic Head Bracket
9
5/8”(15.9 mm) Type X Gypsum boardKnauf U-Stud profile*Knauf Acoustic Head BracketKnauf Base Angle (60x60x2.5 mm)Anchor KDML incl. 1 SDS2Screw TB 35Screw TB 45Screw TB 60Screw TB 80Knauf Hex Head Screw (30 mm)Knauf Joint TapeKnauf Readygips Jointing CompoundKnauf Approved SealantKnauf Insulation Glass wool 16kg/m3, 89 mm.thick.
System System Components Technical Data
Description
Wall Thickness.....................................min. 600mmCavity..................................................min. 475mmHeight of Wall.........................................Up to18 mStud Spacing......................... Max. 1200mm CentresFire Rating............................................... 2 hoursSound Reduction........................................R’w 70
The KCUW-A116 system is an assembly of 2 custom made Z-shape purlins which are fixed together to form the U-stud profile. The U-stud is mechanically installed to an acoustic head bracket and base angle at the floor.
Used as independent liners back to back, the U-stud is typically lined using 4x5/8” (15.9 mm) GWTX boards on one side of U-stud using Knauf TB screws.
The Knauf KCUW-A116 wall is used as a high performing acoustic system, ultimately satisfying the highest criteria as set by cinemaoperators for auditoria walls. Built up of 2 independant liners, whilst maintaining no connection between the wall leafs ensures the systemmaximises the airborne sound transmission loss between auditoria with no direct structure borne noise transfer.
The liner consists of a vertical framework built up of U-stud profiles dimensioned and centred at max. 1200mm centres (depending on the wallheight reqirements). The U-studs are fixed to a (60 x 60 x 2.5 mm) angle at the base, and coupled at the head to an 'acousitc head bracket'.The 'head bracket' is fastened to the primary structure either into concrete or steel using the appropriate Knauf approved fixing.
To maximise performance, up to 4 layers of Knauf 15.9 mm GWTX gypsum boards are screw fixed to the open side(s), staggered horizontallyand vertically from layer to layer. The sealing of all junctions and perimeters inlcuding head and floor is done using Fireblock sealant providingthe necessary air-tightness to satisfy both the acoustic and fire requirements. Knauf glasswool insulation of 89mm thickness with a minimumdensity of 16 kg/m3 is vertically restrained between the U-studs as well as filled into the hollow void of the profiles to optimise cavity damping.
The joints of the external layer of the Type X boards are taped and jointed with Knauf Joint tape and Readygips jointing compound.
Knauf KCUW-A116 Cinema Wall System
Fire................................................ASTM E119-12Boards...........................................ASTM C1396Sound............................................ASTM E90Profiles..........................................ASTM C645
*U-stud profile sizes and gauge thicknessdependent on structural height requirements. Refer Knauf techncial department for details.
Standards
10
Knauf KWC A116 Cinema WallKnauf KWC A116 is a high performing, cost effective wall system designed to meet the high requirements of sound reduction and fire resistance for modern day cinemas.
V-Brace - Cinema Wall System
11
Knauf KWC A116 Cinema WallKnauf KWC A116 is a high performing, cost effective wall system designed to meet the high requirements of sound reduction and fire resistance for modern day cinemas.
V-Brace - Cinema Wall System
12
Knauf KWC-A116 Cinema Wall
Knauf UW RunnerKnauf CW StudKnauf Drywall Screw
Knauf Gypsum BoardKnauf Approved Sealant
Knauf Insulation Material
Connection to Solid Wall
Joint and Stud Reinforcement
X
Knauf UW RunnerKnauf CW Stud
Knauf Drywall Screw
Knauf Gypsum BoardKnauf Joint Compound + Joint Tape
Knauf Insulation Material
LN ScrewKnauf V-Bracing
Knauf CW StudKnauf Gypsum Board
Knauf UW RunnerKnauf Drywall Screw Knauf Approved FixingKnauf Approved Sealant
Knauf Insulation Material
Connection to Floor
Knauf V-BracingExtended with UW-Runner
LN Screw
Extended with UW-Runner
Connection to Ceiling
Knauf Drywall Screw
Knauf Approved Sealant
Knauf V-BracingExtended with UW-Runner
LN Screw
Knauf Approved FixingKnauf UW Runner
Knauf CW StudKnauf Gypsum Board
Knauf Insulation Material
13
Knauf KWC-A116 Cinema Wall
5/8”(15.9 mm) Type X Gypsum board3 1/2” (89x33x0.9 mm) CW-studUW bottom track (89x25x0.9 mm)UW deep flange head track (89x60x0.9 mm)Knauf V-Brace (42x103x0.9 mm) Anchor KDML incl 1 SDS2Screw LN 13Screw TB 35Screw TB 45Screw TB 60Knauf Joint TapeKnauf Readygips Jointing CompoundKnauf Approved SealantKnauf Insulation Glass wool 16kg/m3, 89 mm. thick.
System System Components Technical Data
Description
Wall Thickness...................................min. 450 mmCavity.................................................min. 355 mmHeight of Wall.....................................Up to 15 mtr.Stud Spacing.................................... 24” (610 mm)Fire Rating................................................ 2 hoursSound Reduction........................................ R’w 65
The KWC-A116 Cinema Wall system is an assembly of - 3 x 5/8" (15.9mm) Knauf GWTX gypsum boards to either side of a V-Brace, double CW stud frame 3 1/2" (89x33x0.9mm) filled with Knauf glasswool.
The Knauf KWC A116 cinema system is a V-Brace double-stud system installed full height between floor and soffit structure providing excellent acoustic performance as well as fire protection up to 3 hours. The wall, not less than 450mm footprint to reach cinema sound reduction requirements, consists of two rows of parallel vertical 3 1/2” (89 mm) CW-profiles spaced at max. 24” (610 mm) centres, each one braced by V-braces extended to a UW runner at 2m vertical centres from one row to the other for heights up to 15m. The CW-profiles are braced between UW 89mm floor track and deep flange head tracks that are fastened to the primary supporting structure. 3 layers of Knauf 5/8“ (15.9 mm) Type X gypsum boards are screw-fixed horizontally to the external sides of the double stud frame with both horizontal and vertical joints staggered from layer to layer.
Sealing of all junctions between the facing boards and the primary structures are kept flexible with Knauf approved fire and acoustic sealant providing the necessary air-tightness in case of fire. A 3 1/2” (89 mm) un-faced glass-fibre blanket of 16kg/m3 density is placed between the studs of each row preventing reverberation inside the void.
Fire................................................ASTM E119-12Boards...........................................ASTM C1396Sound............................................ASTM E90Profiles..........................................ASTM C645
Standards
14
Knauf KCC-A113 Ceiling SystemThis KCC A113 ceiling system, also known as ‘Mass Barrier Ceiling’ is designed specifically for its high sound reduction and fire resistance performance.
Mass Barrier - Cinema Ceiling System
15
Knauf KCC-A113 Ceiling SystemThis KCC A113 ceiling system, also known as ‘Mass Barrier Ceiling’ is designed specifically for its high sound reduction and fire resistance performance.
Mass Barrier - Cinema Ceiling System
16
1500 mm.
Hanger Spacing
900 mm.Main Channel
Knauf KMUL AnchorScrew TB 35/45/60 mm length Knauf Phonic U-Hanger
All dimensions above are the minimum requirements for compliance to ASTM
LN Screw
ACCESSORIES
PERSPECTIVE VIEW
Main "C" Channel (1.4 mm. thk.)
12.560
67
22
12.5 35 12.5
Hat Furring Channel 0.5 mm. thk.
SECTION - B
406 mm.
1500 mm.
50 mm100 mm Main “C” Channel (60x12.5x1.2 mm)
Hat Furring Channel (67x22x0.5 mm)Screw TB 35/45/60 mm length
3 x 5/8”(15.9 mm) Type X Gypsum Board
Threaded Rod (8 mm dia.)Knauf Phonic U-Hanger (110x30x3 mm)
Screw LN 13
KMUL Anchor
Knauf Approved Sealant
SECTION - A
900 mm. 200 mm
Hat Furring Channel (67x22x0.5 mm) Screw TB 35/45/60 mm lengthUD - Channel
Knauf Approved Sealant
KMUL Anchor
Main “C” Channel (60x12.5x1.2 mm)
3 X 5/8”(15.9 mm) Type X Gypsum Board
Threaded Rod (8 mm dia.)Knauf Phonic U-Hanger (110x30x3 mm)
Screw LN 13 Hat Furring ChannelSplicing / End to End Connection
400 mm
Hat Furring Channel
LN Screw
Knauf KCC A113Ceiling System Details
17
5/8”(15.9 mm) Type X Gypsum BoardMain “C” Channel (60x12.5x1.4 mm)Hat Furring Channel (67x22x0.5 mm)Knauf Phonic U-Hanger (110x30x3 mm)Threaded Rod (8 mm dia.)KMUL AnchorScrew LN 13Screw TB 35/45/60 mm lengthKnauf Readygips Jointing CompoundKnauf Approved SealantKnauf Mineral Wool 16kg/m3 Coating for cold formed framing members............ASTM A1003
Non-structural steel framing members..................ASTM C645Specification for gypsum boards..........................ASTM C1396Sound transmission loss......................................ASTM E90Fire resistance....................................................ASTM E119Surface burning characteristics............................ASTM E84
System System Components Technical Data
Description
Weight per m2................................................... approx. 45 Kg.Max. span between suspensions............................. *1500 mm.Max. span between main channels............................ *900 mm.Fire rating from the board side only.............................. 2 hours
Standards
Application
* Spacings of main channels and suspensions should be as per submitted technical proposal. Please contact the technical team for details.
The Knauf KCC A113 ceiling system is a concealed system consisting of a 8mm threaded rod connected to the Knauf Phonic U-Hanger suspended andspaced at maximum 900mm O.C. The Knauf Phonic U-Hanger is attached to the main ‘C’ channel (60x12.5x1.4mm) by means of 2 Knauf LN screwsspaced at a maximum 1500mm at the desired height. The hat furring channels (67x22x0.5mm) are positioned horizontally across the main ‘C’ channelspaced maximum 406mm O.C and screw fixed at each flange with LN screws.
Three layers of Knauf Type X 15.9mm are used to clad the underside of thefurring channels using Knauf TN screws, with all joints staggered from layer to layer. Finishing of the surface by means of tape & jointing need only beapplied to the face board to provide a smooth and level surface ready for paint application.
The Knauf KCC A113 ceiling system is mainly used as 'Mass Barrier Ceiling'. where strong protection against sound transmission and penetration isprimordial: Multiplex Cinemas, Auditoria, Hotel Halls, Ballrooms.
Knauf KCC A113 Ceiling System
The KCC A113 Cinema ceiling system is an assembly of 3 x 5/8” (15.9mm) Type X boards fixed to 0.5mm furring channels and suspended from structure using 8mm threaded rod and Knauf Phonic U-Hanger.
Knauf Cinema Project References
18
CITY WALK 4D (CINEMA)Region: DubaiKnauf System Used: V-Brace Partition & Mass Barrier CeilingMain Contractor: Fino InternationalYear Of Completion: 2015
Knauf Cinema Project References
19
Deira City Centre - Cinema Project
Bawadi - Cinema Project
Region: DubaiKnauf System Used: V-Brace, U-Stud Partition & Mass Barrier CeilingMain Contractor: Al Tayer StocksYear Of Completion: 2016
Region: Al AinKnauf System Used: V-Brace, U-Stud Partition & Mass Barrier CeilingMain Contractor: Dzine interiorsYear Of Completion: 2014
(The Largest Cinema Screen in the Middle East & North Africa)
Knauf Cinema Project References
20
OPERA HOUSE
RAJMAHAL THEATRE
Region: DubaiKnauf System Used: U-Stud Partition & Mass Barrier CeilingMain Contractor: GreenlineYear Of Completion: 2016
Region: DubaiKnauf System Used: V-Brace & U-Stud PartitionMain Contractor: CPDYear Of Completion: 2016
Knauf Cinema Project References
21
HABTOOR THEATRERegion: DubaiKnauf System Used: V-Brace Partition & Mass Barrier CeilingMain Contractor: Habtoor Leighton GroupYear Of Completion: 2016
22
Get your TRAINING RECOGNITION CERTIFICATE today and keep your company ahead of the competition“REMEMBER TO BE THE BEST YOU NEED TO LEARN FROM THE BEST”
Become a Drywall Expert
Knauf Training Academy
Knauf Training academy has purposely been developed to offer a variety of courses that provide practical training on the design and construction of plasterboard systems. Training also improves the safety on site and help companies complete projects more efficiently whilst taking advantage learning Hands-on experience whilst under the guidance of a Knauf Training Specialist.
The courses that we offer include partitions, wall linings, shaftwalls and suspended ceilings. Training is also provided on tape & jointing (hand application).
The main aim of these courses is to provide knowledge and an understanding on the installation and the key purpose of Knauf drywall systems. Also we want to ensure that all trainees have full confidence in their ability when either proposing a Knauf system or constructing a system on-site. Knauf Training will also give you a better understanding of the products that we offer in the market.
The Key Advantages ofKnauf Training:• Improve efficiency• Reduce wastage of materials• Learn proper application methods• Faster installation time• Practice in the use of high-end drywall tools• Ensure a successful delivery of projects
Upon completion of any of the Knauf training courses a Knauf training attendance/recognition certificate is awarded. This certificate gives you and edge over other competitors, as it is an endorsement that you have been instructed in the best practice of the industry, by the best in the industry. This in-turn gives us the confidence then to recommend you to future developers.
23
ISO certifications Knauf factory from Ras al Khaimah is holding ISO 9001:2008 Quality Management System certification since 2011. Knauf has been certified on ISO 14001: 2004 and BHS OHSAS 18001:2007
Estidama and LEED compliant products
As per Estidama & LEED requirements, our products have been tested for chemical materials banned or required to be in a very low concentration in third party well known laboratories.
AsbestosOur products are free from asbestos. Boards produced in Knauf factory in Ras al Khaimah have been tested for asbestos content, no asbestos was detected. Complies with international requirements regulating this substance.
FormaldehydeThe boards produced in Knauf factory in Ras al Khaimah have been tested on DIN EN ISO 16009 for formaldehyde emissions. Maximum recorded concentration levels on 30 days testing were 16µg / m3 ( 0.016 mg/m3) – below the limits required in international standards.
VOCKnauf joint compound Readygips has been tested for VOC ( volatile organic compounds). Detected amount: 0.14 g/l is below the limits required in international standards.
Regional materialsOn a range of 500 miles from factory and quarry location, our boards can provide points for regional materials mentioned in different evaluation criteria (LEED, Estidama, etc.)
Environmental certificationsFor outstanding performances in water and energy management, our factory has been awarded the Environmental Performance Certificate from the Ministry of Environment and Water.
Company Certification
Certificate of RegistrationQUALITY MANAGEMENT SYSTEM - ISO 9001:2008
This is to certify that: Knauf LLCPO Box 112871DubaiUnited Arab Emirates
Holds Certificate No: FM 577441
and operates a Quality Management System which complies with the requirements of ISO 9001:2008 for thefollowing scope:
The production of Metal Profiles, Plasters, Plasterboards, Ready Fix and all supporting activitieswithin the Middle East.
For and on behalf of BSI:Gary Fenton, Global Assurance Director
Originally registered: 09/11/2011 Latest Issue: 25/09/2014 Expiry Date: 09/11/2017
Page: 1 of 2
This certificate was issued electronically and remains the property of BSI and is bound by the conditions of contract.An electronic certificate can be authenticated online.Printed copies can be validated at www.bsi-global.com/ClientDirectory or telephone +971 (4) 3364917.
Information and Contact: BSI, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP. Tel: + 44 845 080 9000
BSI Assurance UK Limited, registered in England under number 7805321 at 389 Chiswick High Road, London W4 4AL, UK.
24
25
Knauf AMF: Complete system solutions from the experts in suspended ceilings – all from a single source.Strong brands are recognized for the value that they bring to customers and the promise of consistent quality and service associated with that.
The international acoustic ceiling manufacturer Knauf AMF with its recognised strong product brands has all of these attributes and has always remained true to themselves, particularly in recent years of rapid transformation – maintaining focus on the modular ceiling and the clear demand for “best practice” in innovation, creativity, design, function and quality.
The next phase of the company’s development takes place with a further step to becoming a complete product and system solutions provider with the product brands AMF THERMATEX® , HERADESIGN® , AMF TOPIQ® , AMF MONDENA® , and AMF VENTATEC® .
Today, Knauf AMF is a corporate brand identity for expertise in complete system solutions of modular ceilings and interior systems, with high performance product brands and portfolios.
HERADESIGN®Wood wool-acoustics
AMF TOPIQ®
Soft board
AMF THERMATEX® Mineral tiles
AMF VENTATEC®Grid and substructure
AMF MONDENA®Metal ceilings
26
1
Technical Performance Sound absorption EN ISO 354 αw = 1.00 according to EN ISO 11654 NRC = 0.95 according to ASTM C 423Humidity resistance up to 100% relative humidity Building material class A1 according to EN 13501-1Sound attenuation Dn,f,w = 25 dB according to EN ISO 10848Light reflection For white similar to RAL 9010 glare-free approx. 88%Colour White similar to RAL 9010 Black similar to RAL 9004 (only for SK edges available)
System C Exposed system, tiles demountable
Recommended module in mm
Thickness/weight TOPIQ® Efficient pro 20 mm (approx. 2.8 kg/m²)
System C
SK VT-S 15/24 VT-S 15F
Please note minimum quantities and lead times.
600 x 600 • • •
625 x 625 • • •
600 x 1200 • • •
625 x 1250 • • •
Sound absorption values(TOPIQ® Efficient pro)
Frequency f (Hz)
Pra
ctic
al
soun
d abs
orpti
on co
efficie
nt α p1,0
0,8
0,6
0,4
0,2
0125 250 500 1000 2000 4000
0.45
0.90
1.00 0.95 1.00 1.00
TOPIQ® Efficient proThe highly absorbent fleece coated acoustic ceiling AMF TOPIQ ® black is the ideal solution for the special requirements in cinemas, movie theatres and home cinemas. Reverberation times in cinemas have to be as short as possible in order that the movie´s sound effects can be enjoyed in all purity. Therefore ceilings and walls of a cinema all have to be highly sound absorbent.
The absorbent surfaces and short reverberation times minimize the room´s acoustic influence on movie sound for its full effect without distortion. Additionally, interfering sounds are dampened effectively to enable a visually and acoustically perfect cinema experience.
The black acoustic fleece on the tile’s surface meets the very low light reflectance requirement for cinemas. Grid profiles with the visible flanges coloured black are available for a homogenous look of the ceiling. The special aesthetic and acoustic qualities make AMF TOPIQ ® black suitable for other areas of application, such as restaurants, bars, clubs and bowling alleys.
Acoustic Ceiling Systems for Cinema
Made in Germany
AMF TOPIQ
27
1
Technical Performance Sound absorption EN ISO 354 αw = 1.00 according to EN ISO 11654 NRC = 0.95 according to ASTM C 423Humidity resistance up to 100% relative humidity Building material class A1 according to EN 13501-1Sound attenuation Dn,f,w = 25 dB according to EN ISO 10848Light reflection For white similar to RAL 9010 glare-free approx. 88%Colour White similar to RAL 9010 Black similar to RAL 9004 (only for SK edges available)
System C Exposed system, tiles demountable
Recommended module in mm
Thickness/weight TOPIQ® Efficient pro 20 mm (approx. 2.8 kg/m²)
System C
SK VT-S 15/24 VT-S 15F
Please note minimum quantities and lead times.
600 x 600 • • •
625 x 625 • • •
600 x 1200 • • •
625 x 1250 • • •
Sound absorption values(TOPIQ® Efficient pro)
Frequency f (Hz)
Pra
ctic
al
soun
d abs
orpti
on co
efficie
nt α p1,0
0,8
0,6
0,4
0,2
0125 250 500 1000 2000 4000
0.45
0.90
1.00 0.95 1.00 1.00
TOPIQ® Efficient proThe highly absorbent fleece coated acoustic ceiling AMF TOPIQ ® black is the ideal solution for the special requirements in cinemas, movie theatres and home cinemas. Reverberation times in cinemas have to be as short as possible in order that the movie´s sound effects can be enjoyed in all purity. Therefore ceilings and walls of a cinema all have to be highly sound absorbent.
The absorbent surfaces and short reverberation times minimize the room´s acoustic influence on movie sound for its full effect without distortion. Additionally, interfering sounds are dampened effectively to enable a visually and acoustically perfect cinema experience.
The black acoustic fleece on the tile’s surface meets the very low light reflectance requirement for cinemas. Grid profiles with the visible flanges coloured black are available for a homogenous look of the ceiling. The special aesthetic and acoustic qualities make AMF TOPIQ ® black suitable for other areas of application, such as restaurants, bars, clubs and bowling alleys.
Acoustic Ceiling Systems for Cinema
Made in Germany
AMF TOPIQ
Technical Performance Sound absorption EN ISO 354 α w = 0.90 according to EN ISO 11654 NRC = 0.90 according to ASTM C 423Humidity resistance up to 100% relative humidity Building material class A2 according to EN 13501-1Sound attenuation Dn,f,w = 28 dB according to EN ISO 10848Thermal conductivity λ = 0.040 W/mk as per EN 12667Light reflection up to 3,8%Colour Black similar to RAL 9004
System A Concealed system, panels demountable
Sound absorption values
Frequency f (Hz) Pr
actic
al so
und a
bsor
ption
coeffi
cient
α p1,0
0,8
0,6
0,4
0,2
0125 250 500 1000 2000 4000
0.50
0.750.85
0.901.00 1.00
THERMATEX® Aquatec blackThanks to its special composition, THERMATEX® Aquatec resists moisture up to 100% RH. This means that even with a high humidity and temperatures between 0 and 40°C the panel is inherently stable at all times. Additionally, thanks to good sound absorption, the ceiling panel shows excellent acoustic features.
Available sizesand edges System A
AW/GN
Please note minimum quantities and lead times
600 x 600 mm •
AMF THERMATEX
Made in Germany
28
Material required for System A2 (per m2)
Y
XModule in mm
600
x 600
625
x 625
300
x 120
0
312.
5 x 1
250
1 AMF THERMATEX® tiles pieces 2.78 2.56 2.78 2.56
2 T-Main runner T24/38 – 3750 lin. m 1.67 1.60 3.34 3.20
3 L-Cross tee – PQL 600/625 or. PQL 300/312.5 pieces 5.56 5.12 5.56 5.12
4Spacer bar – DI 600/625 or 300/312.5 (spacer bar every 2 tiles) pieces 1.39 1.28 2.78 2.56
5 SoS or. SoH or alternative pieces 1.39 1.28 2.78 2.56
6 Perimeter trim RW L lin. m 0.60 0.60 0.60 0.60
7 Perimeter wedge RF pieces 0.30 0.30 0.30 0.30
8 Main runner distances max. m 0.60 0.63 0.30 0.32
9 Hanger distances m 1.20 1.25 1.20 1.253
System C Exposed System AMF VENTATEC
SK
VT -
1
2
3
X
7
5
Y
98
6
4
Material required for System C (per m2)
Y
X
Module in mm
Valid for T15, T24, T35 and Fineline grid systems 60
0 x 6
00
625
x 625
600
x 120
0
625
x 125
0
300
x 120
0
312,
5 x 1
250
400
x 120
01 Knauf AMF mineral tile pieces 2.78 2.56 1.39 1.28 2.78 2.56 2.09
2 T-Main runner – 3600 or 3750 lin. m 0.84 0.80 0.84 0.80 0.84 0.80 0.84
3 T-Cross tee – 1200 or 1250 lin. m 1.67 1.60 1.67 1.60 3.34 3.20 2.50
4 T-Cross tee – 600 or 625 lin. m 0.84 0.80 – – – – –
5 RWL perimeter trim lin. m 0.60 0.60 0.60 0.60 0.60 0.60 0.60
6SoS quick hanger with upper eye or alternative pieces 0.67 0.67 0.67 0.67 0.67 0.67 0.67
7 Hold-down clip DFK (optional) pieces 5.56 5.12 2.78 2.56 5.56 5.12 4.16
8 Hanger distances m 1.25 1.20 1.25 1.20 1.25 1.20 1.25
9 Main runner distances m 1.20 1.25 1.20 1.25 1.20 1.25 1.20
Required material (guideline, without waste)
AccessoriesJS - 15
Outer mitre for RWL 24/24
JS - 17Inner mitre for
RWL 24/24
JS - 24 Outer mitre for
SRW 25/15/8/15
JS - 28 Inner mitre for
SRW 25/15/ 8/15
Other wall angles and accessories are available on request.
Wall angleWall angle RWL 24/24
Shadow trim SRW 20/20/20/20
Shadow trim SRW 25/15/8/15 For VT edge
Edge details
SK VT 15/24 VT-S 15/24 VT-S15F
System A Concealed System
Required material (guideline, without waste)
GN - Z
AW - T24/38
AW - Stufen
GN - Z
AW - T24/38
AW - Stufen-
System variant A2
System variant A1
System variant A3
GN - Z
AW - T24/38
AW - Stufen-Z
1
8
Y
X
76
6
3
5
4
2
9
Edge detailsSystem A1 System A2 System A3
GN/GN AW/GN AW/GN
Made in Germany
29
2
1
3
4
6
5
Wall mounting with HERADESIGN® holding profi lesHigh-grade grid mounting system with concealed sections
Impact resistant design with 35 mm thick panels
Technical notes:
Main and edge profiles are available in the lengths 3000 and 1500 mm. Mounting on wood laths or as a high-grade grid mounting system with
concealed aluminium sections possible. Panel dimensions only available in the sizes 1200/600 and 600/600 mm. The SY-02 edge design is available in the thicknesses of 25 and 35 mm. Not suitable for indoor swimming pools. Follow the installation instructions! Concealed installation with HERADESIGN® holding profiles is also an
alternative for ceiling applications.
Knauf AMF is not a kit provider in terms of DIN-EN 13964.
Holding profi lesIt is not only the ceiling that makes a room perfect; you can give a room a special effect by mounting an acoustic wall solution. Take advantage of the many applications of HERADESIGN® products and their respective mounting systems.
Easy and quick installation thanks to coordinated system components
For mounting on walls and ceilings High stability due to continuous main and edge profiles Aluminium holding profiles for high-grade concealed systems
1 HERADESIGN® basic profi le 2 HERADESIGN® main profi le 3 HERADESIGN® edge profi le 4 HERADESIGN® spacer 5 HERADESIGN® acoustic panel 6 HERADESIGN® drilling screw
Made in Austria
We reserve the right to amend technical specifications without notice.The current edition applies. Our guarantee applies only to the defect-free state of our materials. The structural, static and physical characteristics of Knauf systems can only be ensured where only Knauf system components or products recommended by Knauf are used. Consumption, quantity and design specifications are typical figures, which may not be transferable under different circumstances. All rights reserved. Changes, reproductions and photo-mechanical and electronic repetition, even in part, require the specific permission of Knauf LLC, PO Box 112871, Dubai, United Arab Emirates.
Knauf Qatar BranchP.O.Box 27111
Doha, State of QatarTel: +974 4 452 8191Fax: +974 4 452 8181
Knauf RAK PlantP.O.Box 50006
Ras Al Khaimah, U.A.ETel: +971 7 221 5300Fax: +971 7 221 5301
Knauf AMF DubaiP.O.Box 293713 Dubai, U.A.E
Phase 5E, Wing A, Office #847,Dubai Airport Free Zone (DAFZA)
Tel: +971 4 6091808Fax: +971 4 6091806
We reserve the right to amend technical specifications without notice. The current edition applies. Our guarantee applies only to the defect-free state of our materials. The structural, static and physical characteristics of Knauf systems can only be ensured where only Knauf system components or products recommended by Knauf are used. Consumption, quantity and design specifications are typical figures, which may not be transferable under different circumstances. All rights reserved. Changes, reproductions and photo-mechanical and electronic repetition, even in part, require the specific permission of Knauf LLC, P.O.Box 112871, Dubai, United Arab Emirates.
Knauf Head OfficeP.O.Box 112871, Dubai, U.A.E
Tel: +971 4 337 7170Fax: +971 4 334 9659