Chronos...Measuring head movement Right-and-left direction Inside -9.0mm to Outside +12.5mm...
Transcript of Chronos...Measuring head movement Right-and-left direction Inside -9.0mm to Outside +12.5mm...
-
Chronos*Optimize workflow and grow your practice
with guided binocular refraction.
It is time to reinvent refraction.
-
I need to optimize workflow and increase patient convenience.With Chronos, Now You Can.It is time to reinvent refraction.
DELEGATE
• SightPilot™ is a guided refraction system that simplifies the
exam and facilitates delegation.
GROW• Chronos offers the versatility critical for growing your practice.
SAVE SPACE• Chronos combines binocular autorefraction and keratometry
measurements with binocular subjective testing and visual acuity
in a single instrument that occupies minimum space.
• Chronos reduces the number of conventional refraction lanes
and additional refractometers needed.
Increase patient convenience,
optimize workflow and grow your practice - without compromise.
Chronos offers binocular autorefraction, keratometry measurements and visual
acuity with subjective testing. Chronos is a single space-saving instrument that
optimizes your workflow.
**Applicable distance is subject to the device’s communication performance and the communication environment.32
Chronos offers RTC
(Remote Tablet
Control) for social
distance protocol.**
-
SightPilot™ is optimized for understanding and efficient
workflow, facilitating delegation
when required.
• SightPilot™ simplifies the user interface to provide a step-by-step guide
through the refraction process.
• At each step, the operator is given instructions to proceed with the
refraction, based on the patient’s response.
54
-
7
Chronos Specifications
Built-in autorefractometer (2x)
Built-in chart system (2x)
Adjustable range of vertical table heights
Automatic 3D alignment
Fully featured computerized phoropter
Wheelchair accessible
Chronos combines binocular autorefraction and keratometry measurements with binocular subjective testing and visual acuity
in a single instrument that occupies
a minimal amount of space and optimizes workflow.
6
Accommodate patients
The table offers vertical
positioning for Chronos
at different heights.
-
©2020 Topcon Healthcare | [email protected] | tphc.io/reinventrefraction
SPECIFICATIONS & PERFORMANCE
FEATURE SPECIFICATION
Objective measurement
Refraction measurement range
Spherical refractive power -25D – +22D 1
Cylindrical refractive power 0D – ±10D 1
Cylinder axial angle 1° – 180°
Corneal curvature measurement range
Corneal curvature radius 5.00mm – 10.00mm
Corneal refractive power 67.50D – 33.75D (Conversion value when the corneal refractive ratio is 1.3375)
Minimum measurement unit
Spherical/cylindrical refractive power 0.12D
Cylinder axial angle 1°
Corneal curvature radius 0.01mm
Corneal refractive power 0.12D
Display of measured value Displayed on the screen of the operation controller
Minimum measurable pupil diameter
ɸ2.0mm
PD measurement range 50mm – 80mm
Minimum PD measurement unit 0.5mm
Subjective measurement
Refraction measurement range
Spherical power/ADD/ Cylindrical powerThese must meet all the conditions mentioned at the right 4
-18.00D ≤ Equivalent spherical power ≤ +18.00D 2
-8.00D ≤ Cylindrical power ≤ 0.00D 3
Cylinder axial angle 1° – 180°
Horizontal prism(One eye movable range)
±15.0 5
Vertical prism(One eye movable range)
±5.0
Minimum measurement unit
Spherical/ADD refractive power 0.25D
Cylindrical refractive power 0.25D
Cylinder axial angle 1°
Prism refractive power 0.1
Test distance Far-/Near-point test distance can be set between 25cm and 6.096m
Visual acuity measurement range 6 0.05 – 1.6 decimal
Charts Visual acuity charts, spherical power correction charts, astigmatism correction charts and binocular function charts
Display of measured value Displayed on the screen of the operation controller
Record of measured value Printing by thermal printer/external printer, data output
Measuring head movement Right-and-left direction Inside -9.0mm to Outside +12.5mm
Up-and-down direction Down 15mm to Up 15mm
Back-and-forth direction Forward: 20mm - Backward: 20mm
Measuring head rotary angle Convergence 17.5° to Divergence 8.5° (Eyeball torsion axis center)
Power supply AC100 - 240V 50-60Hz
Power consumption 160VA
Dimensions and weight (main unit) 525mm (H) × 722mm (W) × 278mm (D), 31.2kg
1. The dioptric powers are indicated with reference wavelength λe = 546.07 nm 2. The conversion value with “VD=12mm” is described here.3. The conversion value with the pupil power (VD=-3mm) is described here.4. The value described here is the maximum value. The measurement range is smaller according to
the test distance setting for executing a test or the setting conditions of VD during measurement.
5. The value described here is the maximum value. The measurable range is smaller according to the combination of the patient’s PD and the test distance.
6. 0.1 – 1.6 complies with ISO 10938
Subject to change in design and/or specifications without advanced notice. In order to obtain the best results with this instrument, please be sure to review all user instructions prior to operation. Medical device MDD Class Im. Manufacturer: Topcon Corporation.
IMPORTANT
Dist
ribut
ed in
Eur
ope
10.2
0
TOPCON EUROPE MEDICAL B.V.Essebaan 11, 2908 LJ Capelle a/d IJssel P.O. Box 145, 2900 AC Capelle a/d IJsselTHE NETHERLANDS Phone: +31 -(0)10-4585077 Fax: +31 -(0)10-4585045 E-mail: [email protected] www.topcon-medical.eu
TOPCON DANMARKPraestemarksvej 25, 4000 RoskildeDANMARK Phone: +45-46-327500 Fax: +45-46-327555 E-mail: [email protected] www.topcon-medical.dk
TOPCON SCANDINAVIA A.B.Neongatan 2, P.O.Box 25, 43151 Mölndal SWEDEN Phone: +46-(0)31-7109200 Fax: +46-(0)31-7109249 E-mail: [email protected] www.topcon-medical.se
TOPCON ESPAÑA S.A.Frederic Mompou, 4, 08960 Sant Just Desvern Barcelona, SPAIN Phone: +34-93-4734057 Fax: +34-93-4733932 E-mail: [email protected]
TOPCON ITALYViale dell’ Industria 60, 20037 Paderno Dugnano, (MI) ITALY Phone: +39-02-9186671 Fax: +39-02-91081091 E-mail: [email protected] www.topcon-medical.it
TOPCON FRANCE MEDICAL S.A.S.1 rue des Vergers, Parc Swen, Bâtiment 2, 69760 Limonest, FRANCEPhone: +33-(0)4-37 58 19 40, Fax: +33-(0)4-72 23 86 60E-mail:[email protected]
TOPCON DEUTSCHLAND G.M.B.H.Hanns-Martin-Schleyer Strasse 41, D-47877 Willich, GERMANY Phone: (+49)2154-885-0 Fax: (+49)2154-885-177 E-mail: [email protected] www.topcon-medical.de
TOPCON POLSKA SP. Z. O. O.ul. Warszawska 23, 42-470 Siewierz POLAND Phone: +48-(0)32-670-50-45 Fax: +48-(0)32-671-34-05 E-mail: [email protected] www.topcon-medical.pl
TOPCON (GREAT BRITAIN) MEDICAL LIMITED
Topcon House, Kennet Side, Bone Lane, Newbury, Berkshire RG14 5PX UNITED KINGDOMPhone: +44-(0)1635-551120 Fax: +44-(0)1635-551170 E-mail: [email protected]
TOPCON IRELAND MEDICAL Unit 292, Block G, Blanchardstown, Corporate Park 2 Ballycoolin Dublin 15, D15 DX58, IRELAND Phone: +353-12233280 E-mail: [email protected] www.topcon-medical.ie
*Not available in all countries. Please check with your local distributor for availability in your country.