Christrio Gelacquer LED UV Polish
description
Transcript of Christrio Gelacquer LED UV Polish
HOW TO APPLY:
1: Prep the nails as usual. Cleanse the nail very well with wiping solution. Wait for nails to be completely dry. (Chalky finish)
2: Apply a thin coat of Gelacquer LED basecoat to all 10 nails and then cure under LED light for 10 seconds; 30 seconds with UV lamp.
3: Remove the residue after it is completely cured with a wiping solution and let dry.
4: Apply a thin coat of desired color to all 10 nails. Cure under LED light for 10 seconds; 30 seconds with UV lamp.
5: Repeat Step 4 if color needs to be darker.
6: Apply Gelacquer topcoat to all 10 nails. Remove sticky residue after completely cured. Cure under LED light for 10 seconds; 30 seconds with UV lamp.
HOW TO REMOVE:
1: Buff the shine off the surface of the nails.
2: Wet cotton with acetone, wrap around the nail and cover with kitchen foil. Wait for a few minutes, then remove wrap one by one.
3: Take an orange wood stick and gently push on the loosened gel downwards.
***The gel does not disintegrate in the acetone like acrylic polymer/powder does, it softens with acetone.***
4: Gently condition the nails with cuticle oil or lotion.
APPLICATION INSTRUCTIONS