Choose the Curriculum Delivery that Suits YOUR Style!alleghenyedusys.com/system/resources...Choose...
Transcript of Choose the Curriculum Delivery that Suits YOUR Style!alleghenyedusys.com/system/resources...Choose...
Choose the Curriculum Delivery that Suits YOUR Style!
E BooksAs an alternative to printedbooks, E Booksoffer a way to savemoney for students.Get the samecontent as ourbooks but for asubstantial savings.
CoursewareInstead of buying Class sets ofText BooksOur best value for schools thatpurchase class sets of books for theirstudents is Courseware. We send you a DVD with all of thecourse content on it. Just copy the DVD onto the school serverand students and teachers have unlimited access to our Bookand Video content. Students have the ability to print step-by-step instructions and watch supporting videos.
The Mastercam Training Guides by CamInstructor are excellent!! Very clear.I love the way it starts out with objectives, then tells you what you will do, thentells you how to do it.
Dale D, Machine Tool Technology Instructor
“ “
BooksChoose from our full line of training guides. Eachguide includes a DVD with videos showing howto complete each chapter in the book. MastercamX6 HLE/Demo Software is also included.
1425 Freeport Road, Natrona Heights, PA 15065(800) 232-7600www.alleghenyedusys.com
Mastercam – Mill 2D & 3D• 14 Lessons from the Mill 2D Training Guide on how to use Mastercam to create 2D Geometry,
2D Milling Toolpaths and how to use the Work Co-ordinate System. 2 lessons on FBM.• 7 Lessons on how to use Mastercam to create 3D Surface Models, Solid Models and 3D Surface
Machining Toolpaths.• 28 Exercise Drawings and 4 Advanced Exercise Drawings.• Multi-Media DVD with Video instruction showing how to complete each lesson from start to finish.• Mastercam HLE/Demo Software included.Price: $85.00
X6 ISBN: 978-1-927359-02-0 • X7 ISBN: 978-1-927359-24-2
Mastercam – Mill 3D• 7 Lessons on how to use Mastercam to create 3D Surface and Solid Models, 3D Surface
Toolpaths and new HSS Toolpaths.• 12 Exercise Drawings.• Multi-Media DVD with Video instruction showing how to complete each lesson from start to finish.• Mastercam HLE/Demo Software included.Price: $65.00
X6 ISBN: 978-1-927359-00-6 • X7 ISBN: 978-1-927359-26-6
Mastercam – Mill 2D• 12 lessons on how to use Mastercam to create 2D Geometry, 2D Milling Toolpaths and how to
use the Work Co-ordinate System.• 16 Exercise Drawings and 4 Advanced Exercise Drawings.• 2 lessons on Feature Based Machining.• Multi-Media DVD with Video instruction showing how to complete each lesson from start to finish.• Mastercam HLE/Demo Software included.Price: $65.00
X6 ISBN: 978-1-927359-01-3 • X7 ISBN: 978-1-927359-21-1
Mastercam – Lathe• 9 lessons on how to use Mastercam to create 2D Geometry, 2D Lathe Toolpaths and C-Axis
Toolpaths.• 9 Exercise Drawings.• Multi-Media DVD with Video instruction showing how to complete each lesson from start to finish.• Mastercam HLE/Demo Software included.Price: $55.00
X6 ISBN: 978-1-927359-03-7 • X7 ISBN: 978-1-927359-28-0
Mastercam – Wire• 5 lessons on how to use Mastercam to create 2D Geometry and 2D Wire Toolpaths.• 4 Exercise Drawings.• Multi-Media DVD with Video instruction showing how to complete each lesson from start to finish.• Mastercam HLE/Demo Software included.Price: $55.00
X6 ISBN: 978-1-927359-06-8 • X7 ISBN: 978-1-927359-37-2
Training GuidesSuitable for courses utilizing Mastercam Software where Mastercamis used to teach both CAD and CAM
Older versions of Mastercam available. Please contact Allegheny Educational Systems, Inc. for more details.
Allegheny Educational Systems, Inc.1425 Freeport Road, Natrona Heights, PA 15065 • (800) 232-7600 • www.allegheyedusys.com
Mastercam – Mill 2D/Lathe Combo includes:Mastercam Mill 2D Training Guide and Mastercam Lathe Training Guide
• We’ve taken the Mill 2D Training Guide and the Lathe Training Guide and combined them.• Excellent for classes that offer both Mill 2D and Lathe instruction.• Multi-Media DVD with Video instruction showing how to complete each lesson from start to finish.• Mastercam HLE/Demo Software included.Price: $96.00
X6 ISBN: 978-1-927359-07-5
X7 ISBN: 978-1-927359-35-8
Mastercam – Mill 2D & 3D/Lathe Combo includes:Mastercam Mill 2D & 3D Training Guide and Mastercam Lathe Training Guide
• We’ve taken the Mill 2D & 3D Training Guide and the Lathe Training Guide and assembledthem into one Package.
• Excellent for classes that offer both Mill 2D & 3D and Lathe instruction.• Multi-Media DVD with Video instruction showing how to complete each lesson from start to finish.• Mastercam HLE/Demo Software included.Price: $130.00
X6 ISBN: 978-1-927359-08-2
X7 ISBN: 978-1-927359-36-5
Combo Books
Mastercam – 4&5 Axis• Over 12 Lessons on how to use Mastercam to create a variety of Multi-Axis Toolpaths.• 16 exercise parts.• Multi-Media DVD with Video instruction showing how to complete each lesson from start to finish.• Includes new Multi-Axis Toolpaths.• Shows how to create NC code for popular 4 & 5 Axis Haas machines.• Mastercam HLE/Demo Software included.Price: $85.00
X6 ISBN: 978-1-927359-04-4 • X7 ISBN: 978-1-927359-30-3
Mastercam – Solids• 13 lessons showing how to use Mastercam to create a variety of Solid Part Models• Exercise Drawings for each lesson.• Multi-Media DVD with Video instruction showing how to complete each lesson from start to finish.• Mastercam HLE/Demo Software included.Price: $65.00
X6 ISBN: 978-1-927359-05-1 • X7 ISBN: 978-1-927359-38-9
Older versions of Mastercam available. Please contact Allegheny Educational Systems, Inc. for more details.
Allegheny Educational Systems, Inc.1425 Freeport Road, Natrona Heights, PA 15065 • (800) 232-7600 • www.allegheyedusys.com
Older versions of Mastercam available. Please contact Allegheny Educational Systems, Inc. for more details.
Allegheny Educational Systems, Inc.1425 Freeport Road, Natrona Heights, PA 15065 • (800) 232-7600 • www.allegheyedusys.com
For a FREE Desk Copy of any of our Training Products just go to:
www.caminstructor.com
and click on Teacherʼs Corner OR email [email protected]
OR Contact Allegheny Educational Systems, Inc. OR call 877-873-6867 ext 703
Mastercam Teacher Kit – Mill 2D, Mill 3D, Lathe• Lesson Plans outlining over 120 hours of instruction on teaching Mastercam.• Instructional Power Points that accompany each Lesson• Sample Mastercam files that relate to each lesson• Evaluation that includes overviews, power points, drawings, multiple choice questions and
answer key provided• Assignments that include instructions and drawingsPrice: $275.00 or FREE with the purchase of 10 or more books, ebooks or courseware
X6 ISBN: 978-1-927359-09-9 • X7 ISBN: 978-1-927359-31-0
CNC Programming Teacher Kit• Answers and solutions to all of the exercises in the CNC Programming Workbooks –
Mill & Lathe• NCPlot G-Code Simulation Software• Instructional videos that teach the basics of CNC Programming for CNC Mills
and LathesPrice: $275.00 each. Free with the purchase of 10 or more Workbooks or
Courseware
ISBN: 978-1-897466-86-5
Mastercam X6
Toolpaths Training Guide – Mill 2D&3DPlease note this book does not include instructions on how to draw the parts, however it shows howto import and position the parts in Mastercam.
• 12 Lessons on how to use Mastercam to create 2D Milling Toolpaths and how to use the WorkCo-ordinate System.
• 2 Lessons on Feature Based Machining• 8 Lessons on how to use Mastercam to create 3D Milling Toolpaths.• 22 Exercise Drawings and 3 Advanced Exercise Drawings.• Detailed instructional videos for each lesson in the book.• Mastercam Home Learning Edition Software included.Price: $65.00
X6 ISBN: 978-1-927359-18-1 • X7 ISBN: 978-1-927359-29-7
Mastercam Toolpath Training GuideSuitable for courses utilizing SolidWorks or Inventor where the parts are drawn in a CAD program otherthan Mastercam and Mastercam is used for teaching CAM.
Teacher Kits
Older versions of Mastercam available. Please contact Allegheny Educational Systems, Inc. for more details.
Allegheny Educational Systems, Inc.1425 Freeport Road, Natrona Heights, PA 15065 • (800) 232-7600 • www.allegheyedusys.com
For a FREE Desk Copy of any of our Training Products just go to:
www.caminstructor.com
and click on Teacherʼs Corner OR email [email protected]
OR Contact Allegheny Educational Systems, Inc. OR call 877-873-6867 ext 703
CNC Programming Student Workbook for Milling• 10 Lessons covering, Absolute and Incremental Programming, Linear Interpolation,
Drilling with Canned Cycles, Circular Interpolation and Cutter Compensation• 14 Exercises and 5 Advanced Exercises• 55 Instructional Videos that teach the basics of CNC Programming for Milling Machines• Free copy of NCPlot G-Code Simulation Software• Space so students can make notes and complete their exercises all in one handy
bookletPrice: $30.00 each
ISBN: 978-1-897466-84-1
CNC Programming WorkbooksSuitable for courses covering manual G-Code programming for both Mill and Lathe
CNC Programming Student Workbook for Lathe• 8 Lessons covering, Absolute and Incremental Programming, Linear Interpolation,
Drilling, Turning – Canned Cycles, Circular Interpolation, Tool Nose Compensation andGrooving/Parting Off• 18 Exercises • 34 Instructional Videos that teach the basics of CNC Programming for Lathes• Free copy of NCPlot G-Code Simulation Software• Space so students can make notes and complete their exercises all in one handy
bookletPrice: $30.00 each
ISBN: 978-1-897466-83-4
CNC Programming Student Workbook for Mill and Lathe• 18 Lessons combined from the Milling Workbook and Lathe Workbook as listed above• 32 Exercises• 89 Instructional Videos combined from the Mill Workbook and Lathe Workbook as listed
above • Free copy of NCPlot G-Code Simulation Software• Space so students can make notes and complete their exercises all in one handy
bookletPrice: $55.00 each
ISBN: 978-1-897466-88-9
Allegheny Educational Systems, Inc.1425 Freeport Road, Natrona Heights, PA 15065 • (800) 232-7600 • www.allegheyedusys.com
“Mastercam for SolidWorks” Training GuidesSuitable for courses utilizing SolidWorks Software and *Mastercam for SolidWorks Software whereSolidWorks is used for teaching CAD and *Mastercam for SolidWorks is used for teaching CAM.*Note: Mastercam for SolidWorks is an-add product sold by your local Mastercam Reseller that works inside
of SolidWorks software.
Mastercam for SolidWorks – Mill 2D• 8 lessons on how to use SolidWorks to create the Solid Model CAD parts and “Mastercam for
SolidWorks” to create the 2D Milling Toolpaths • 16 Exercise Drawings and 4 Advanced Exercise Drawings.• 2 lessons on Feature Based Machining.• 4 lessons on Work Coordinate Systems.• Multi-Media DVD with Video instruction showing how to complete each lesson from start to
finish.Price: $65.00
X6 ISBN: 978-1-927359-13-6 • X7 ISBN: 978-1-927359-34-1
Mastercam for SolidWorks – Mill 3D• 7 lessons on how to use SolidWorks to create the Solid Model CAD parts and “Mastercam for
SolidWorks” to create the 3D Milling Toolpaths.• 14 Exercise Drawings.• Multi-Media DVD with Video instruction showing how to complete each lesson from start to
finish.Price: $65.00
X6 ISBN: 978-1-927359-14-3 • X7 ISBN: 978-1-927359-33-4
SolidWorks and Training GuidesSuitable for courses utilizing SolidWorks Software and Mastercam Software where SolidWorks is used forteaching CAD and Mastercam Software is used for teaching CAM.
SolidWorks and Mastercam – Mill 2D• 8 lessons on how to use SolidWorks to create the Solid Model CAD parts and Mastercam to
create the 2D Milling Toolpaths • 16 Exercise Drawings and 4 Advanced Exercise Drawings.• 2 lessons on Feature Based Machining.• 4 lessons on Work Coordinate Systems.• Multi-Media DVD with Video instruction showing how to complete each lesson from start to
finish.• Mastercam HLE/Demo Software included.Price: $65.00
X6 ISBN: 978-1-897466-99-5 • X7 ISBN: 978-1-927359228
SolidWorks and Mastercam – Mill 3D• 7 lessons on how to use SolidWorks to create the Solid Model CAD parts and Mastercam to
create the 3D Milling Toolpaths.• 14 Exercise Drawings.• Multi-Media DVD with Video instruction showing how to complete each lesson from start to
finish.• Mastercam HLE/Demo Software included.Price: $65.00
X6 ISBN: 978-1-897466-37-7 • X7 ISBN: 978-1-927359-23-5
SolidWorks 2012-2013 Training Guide – Sketching, Modeling & Assembly• 8 lessons on how to use SolidWorks to create fully defined Sketches including:
• Building Relations• Dimensioning• Adding equations to a Sketch• Trimming• Editing and modifying sketches
• 12 lessons on how to use all the Standard SolidWorks Modeling commands to createpart models including• Editing and modifying parts• Selecting Material and finding the Mass of a part• Changing sketch planes in completed Solid Models• Using the Hole Wizard
• 1 Assembly Lesson showing how to mate part models in an assembly including:• Utilizing the correct relations for mating parts• Using the toolbox feature• Using physical dynamics to move components in a completed assembly page 1-34a
• 40 Exercise Drawings• Multi-Media DVD with Video instruction showing how to complete each lesson from start to
finish. Price: $65.00 • ISBN: 978-1-897466-89-6
SolidWorks Training GuideSuitable for courses utilizing SolidWorks Software where the focus is on CAD and Solid Modeling.
Courseware
Allegheny Educational Systems, Inc.1425 Freeport Road, Natrona Heights, PA 15065 • (800) 232-7600 • www.allegheyedusys.com
Includes 21 Lessons covering: Sketching, Modeling and Assembly including:Using SolidWorks to Create fully defined Sketches,
• Building Relations• Dimensioning• Adding equations to a Sketch• Trimming• Editing and modifying sketches
Using all the Standard SolidWorks Modeling commands to create part models,• Editing and modifying parts• Selecting Material and finding the Mass of a part• Changing sketch planes in completed Solid Models• Using the Hole Wizard
Showing how to mate part models in an assembly,• Utilizing the correct relations for mating parts• Using the toolbox feature• Using physical dynamics to move components in a completed assembly
Features Include:1. License to install SolidWorks courseware on Lab Computers and/or School Server2. License to print class sets of projects3. Instructional Videos providing step by step instructions for each Lesson4. Review exercises at the end of each project5. An appendix covering common tips and techniques for using SolidWorks6. Over 700 pages of printable contentPrice: $900.00 – per version
SolidWorks CoursewareAn excellent resource for students learning SolidWorks.
Suitable for schools that purchase class sets of books
Includes 50 Lessons which include Step-by-Step Tutorials andVideos covering:
• Introduction to CAD/CAM – which includes Mastercam Art• Mastercam Mill 2D – create 2D CAD drawings and Toolpaths• Mastercam Mill 3D – create 3D CAD drawings and Surface Toolpaths• Mastercam Lathe – create 2D CAD drawings and Toolpaths• Mastercam Solids - create Solid Models using Mastercam• Mastercam 4 and 5 Axis* - create 4 and 5 axis Toolpaths
Features include:1. License to install “Mastercam Courseware” on Lab Computers and/or School Servers2. Free copy of Mastercam HLE Software3. License to print class sets of Step-by-Step Tutorials4. Instructional Videos showing how to complete each Lesson5. Student Exercises 6. Teacher Resource KitPrice: $1,800.00 per version
Mastercam CoursewareProvides all the instructions students need to learn Mastercam.
Pricing per campus/location:Special Courseware Bundle ......................................................$2,700.00*
Includes:Mastercam Courseware* – per versionSolidWorks Courseware* – per versionCNC Programming Courseware* – per year
• Additional Training Guides available for a nominal fee
Allegheny Educational Systems, Inc.1425 Freeport Road, Natrona Heights, PA 15065 • (800) 232-7600 • www.allegheyedusys.com
Includes 25 Lessons on Mill and Lathe covering all the basics:• Absolute and Incremental Programming• Linear Interpolation• Drilling with Canned Cycles• Circular Interpolation• Cutter Compensation
Features include:1. License to install CNC Programming Courseware on Lab Computers and/or School
Server2. Free copy of NCPlot G-Code Simulation Software3. License to print class sets of Mill and Lathe Workbooks4. Instructional Videos teaching the basics of CNC Programming5. Student Exercises 6. Teacher Resource Kit7. Over 200 pages of printable materialPrice: $900.00 per year
CNC Programming CoursewareExcellent for teaching Computer Numerical Control Programming.
RE
V 0
4/13