any remaining moisture and contam- inants are dried and filtered. Airflow

capacity is 500 scfm with a maxi- mum pressure of 150 psig. Dew points range from 10 to 35°F at at- mosphere. The 180 comes standard with a j-micron rating, with lower micron ratings available.

Circle 419 on tie reader service card

Wastiwater Evaporator landa Wafer Cleaning Systems Camas, Wash.

The HBE evaporator features 8 high- effkiency, long-lasting, industrial coil- type 2600-W heater elements, which evaporate wastewater at a rate of 6 to 8 galktr. ‘Typical applications include min- imizing a variety of waste streams, from mop water and machine coolant water solutions to spent parts washer wastewa- ter. Two models are available in 230 V 3 phase 57 A for Model HBE-1OB and 460 V 3 phase 28 A for model HBE-IOC. Both models are capable of evaporating waste streams in either a batch process or continuous flow.

Circle 420 on the reader service card

Chloride Zinc Plating MacDermid Inc. Waterbury, Corm.

Kenlevel Select is a unique surfac- tam system and patented microemul- sion technology that offers both out- standing product performance and chromate receptivity. KenleveI Select

UItramLifeTM Platinized Anodes

Our anodes live longer, more productive lives. HERAEUS DE NORA anodes offer some shining features:

l Extended anode life. l Increased production with faster plating speeds. l Insoluble platinized titanium or niobium (columbium). l 100, 150, 250 microinch thicknesses available. Or we’ll

custom-fabricate for your needs. l Precious metal plating, high-speed. Industrial and decorative

plating. a Base metal plating copper-nickel-chrome. l Electra winning. l We’ll recoat your existing anodes too.

For full details on Ultra-LifeTM platinized anodes backed by more than a century of experience in precious metals for industry, write or call: HEXAEUS DE NOFtA Inc.

2655 Route 22 West, Union, NJ 07083 800/762=2101

Circle 043 on reader information card

68 METAL FINISHING . AUGUST 1998

can be used in both barrel and rack applications, in either boric acid or low-ammonia type baths.

Circle 421 on the reader service card

Vertical Sputtering System Mill Lane Engineering Lowell, Mass.

The Model VS4000 vertical sputter- ing system can accommodate up to four X-in. diameter sputter down mag- netron cathodes, which can be pow- ered in either DC or RF 13.56 MHz mode. As an option heat or ion milling capability can be substituted for one of the cathodes. It has an extremely small footprint and is equipped standard with a unique load lock. A key feature of the VS4000 is its substrate carrier, which is constructed of solid OFHC copper.

Circle 422 on the reader service card

Oil Skimmer Oil Skimmers Inc. Cleveland

The Model SH waste oil recovery system removes oily wastes floating on water. Designed for ramped, con- gested, or tightly configured areas, the fully automatic Model 5H system works 24 hours a day with no supervi- sion or maintenance in virtually any heavy industrial oil recovery applica- tion, removing petroleum-based oils, animal and vegetable fats, and greases that float on water.

Circle 423 on the reader service card

Hot Stripper for Powder Coat Patclin Chemical Co. Inc. Yonkers, N. Y

Patclin 11 ONF was designed specif- ically to strip powder coat, zinc chro- mate, and other materials from alumi- num, zinc, magnesium, and molded nylon without attacking the base mate- rial. It does not contain any phenolics or chlorinated solvents and is a blend of strong alkaline salts and relatively nontoxic organic solvents.

Circle 424 on the reader service card

Surface Treating Phosphating System Ramco Equipment Corp. Hillside, NJ.

Ramco’s surface treating phosphat- ing cleaning system uses three stan- dard multistation consoles in series. The line incorporates mechanical agi-

L

H Quickly raise high sdids, solvent & water base coabngs to t dry/cure temperatures

Gel most powder coatings in under 1 minute, cure in 1 lo 3 minutes Maximize line speed/product throughput 10 to 40% of conventional oven floor space Maximize efficiency & reduce operating costs

Accommodates or incorporates nearly any type 01 conveyor, rack, robotics, material handling and controk design Ovens and complete finishing systems

environments

selected to match your process requirements Gas catalytic IR safe in solvent environments, electric IR safe m accordance with NFPA and FM, & safe systems for hazardous

a Designs for up to Class 100 clean rooms I

CORPORATION 230 u s Route 202 * P.O. BOX 163

Pomona. New York 10970 J

Circle 021 on reader information card

Get Custom Construcbd Filter i’remes

For high quality filter presses, Precise Filtration Products is the clear choice. Our experienced team

will custom labricate a precisely aligned and fin-

ished machine that meets your needs and fits your budget!

With over 14 years experience in the industry, we can assure you the kind of customer ser- vice and supporl that you demand. Since we work closely with you, and have a low overhead, you can count on us to deliver at the right price.

PFP Series Filter Press Advantages:

l Durability-Stainless steel capped siderails

reduce wear on handles.. .steel surfaces coat- ed with epoxy for extra protection., .siderails

and leg assemblies of heavy-duty 1” cold-

rolled steel for square, precise alignment... capture side bearings on all push plates and

expansion piece5 allow true ram alignment.

l Reliability-All components-manual hy- draulic systems.. .automatic hydraulic sys-

tems.. .hydraulic cylinders matched with hydraulic pumping systems. ..and standard-

ized filter plates--supplied and backed by quality manufacturers for proven performance.

l Versatility--easy expansion of capacity.

l Convenience-Filter plates shift easily for discharging dry solids.. overall operation is

simplified by design.

We also manufacture Slant Plate Clarifiers and

Sludge Thickeners, and stock: * Replacement Filter Cloths l Parts for all Filter Presses l Filter

Plates for all Brands.

Call or tax us 24 hsurs a day lo solvs your filtration needs, or for a FREE copy ot our catalog!

PRECISE FILTRATION PRODUCTS, INC.

3010 Deli St., N.E. Grand Rapids, Michigan 49505

Tel.: 616-363-6661 Fax: 616-363-0052 Distributor/OEM Inquiries Welcome.

Circle 066 on reader information card

METAL FINISHING . AUGUST 1998 69