CHIRON Training
36
www.chiron.de Seconds ahead CHIRON Training Current training program
Transcript of CHIRON Training
www.chiron.de
Seconds ahead
CHIRON TrainingCurrent training program
CHIRON Training
2 I CHIRON Training
CHIRON Training
Ahead through qualification, because knowledge leads to success.
In the CHIRON training centre, we get your staff, both beginners and pros, up-to-date with the latest technology, step by step. With a multitude of individually combinable machines and programming courses, we will qualify your employees and increase productivity of the machines used, thereby enhancing the success of your company. After all, qualified and motivated employees are the most valuable assets of any company.
Our training is didactically structured according to the latest teaching methods. By doing practical work in small groups, the field of interest and the level of knowledge of the participants is taken into account.Our philosophy is to strongly qualify the participants through their own work on our training objects. What is learned can be directly implemented in routine work.
Service- und Instandhaltungsschulungen [ 04 - 13 ]
Bedienerschulungen [ 16 - 17 ]
Programmierschulungen [ 18 - 23 ]
Komponentenschulungen [ 24 - 25 ]
Roboterschulungen [ 26 - 27 ]
Kundenspezifische Schulungen [ 28 - 29 ]
www.chiron.de
Service and maintenance training [ 04 - 13 ]
Operator training [ 16 - 17 ]
Programming training [ 18 - 23 ]
Component training [ 24 - 25 ]
Robot training [ 26 - 27 ]
Customer-specific training [ 28 - 29 ]
„It´s not enough that we do our best; sometimes we have to do what´s required“ Winston Churchill
Your opinion is important to us. To consistently further develop our offered training programs, the course participants are regularly surveyed by our trainers. With this standardized method, we ensure the quality of our courses and recognize potential for optimization early on. As you can see, we‘re constantly working to improve ourselves and to meet your demands.
Our training program is especially characterized by its implementation flexibility. Courses can either be given in our CHIRON training centre or at your site, as you prefer. Our trainers are able to conduct the offered courses in German or English. Optionally, we can provide an inter-preter for other languages.
We‘re looking forward to seeing you in our training program!
Facts
I Duration 4 daysI Dates on request
I Participants Max. 5 participantsI Location CHIRON Werke, Tuttlingen, Germany
4 I CHIRON Training
Training - Service and maintenance
Service and maintenance training for machining centres with basket tool changers
After training has been completed, the training participants should be able to carry out maintenance according to schedule, find malfunctions to a limited degree and be able to properly rectify them.
Target group:Service, maintenance andrepair personnel
Conditions:Basic knowledge on how to work with CNC machining centres, technical vocational training or practical experience with CNC machining centres
Topics:I Safety and accident prevention regulationsI Operation and handling, as well as the mechanical and electrical setup of the machineI Maintenance and repair for early error detectionI Geometrical checkI Check and setting of machine-specific reference pointsI Function and setup of the main spindle sectionI Function, setup and setting of basket changerI Function and setup of workpiece changerI Data backup
We offer service and maintenance training for the following machining centres withbasket tool changers:Series
Spindle version
Control
Order No.1437544
Order No.1437545
Order No.1437578
Order No.1437495
Order No.1437498
Order No.1437634
Order No.1437635
Siemens
Fanuc
Service and maintenance training [ 04 - 13 ]
Operator training [ 16 - 17 ]
Programming training [ 18 - 23 ]
Component training [ 24 - 25 ]
Robot training [ 26 - 27 ]
Customer-specific training [ 28 - 29 ]
www.chiron.de
6 I
Training - Service and maintenance
CHIRON Training
Facts
I Duration 4 daysI Dates on request
I Participants Max. 5 participantsI Location CHIRON Werke, Tuttlingen, Germany
www.chiron.de
Service and maintenance training for machining centres with pick-up tool changer
After training has been completed, the training participants should be able to carry out maintenance according to schedule, find malfunctions to a limited degree and be able to properly rectify them.
Target group:Service, maintenance andrepair personnel
Conditions:Basic knowledge on how to work with CNC machining centres, technical vocational training or practical experience with CNC machining centres
Topics:I Safety and accident prevention regulationsI Operation and handling, as well as the mechanical and electrical setup of the machineI Maintenance and repair for early error detectionI Geometrical checkI Check and setting of machine-specific reference pointsI Function and setup of the main spindle sectionI Function, setup and setting of pick-up tool changerI Function and setup of workpiece changerI Function and setup of background magazineI Data backup
Service and maintenance training [ 04 - 13 ]
Operator training [ 16 - 17 ]
Programming training [ 18 - 23 ]
Component training [ 24 - 25 ]
Robot training [ 26 - 27 ]
Customer-specific training [ 28 - 29 ]
We offer service and maintenance training for the following machining centres withpick-up tool changers:Series
Spindle version
Control
Order No.1437546
Order No.1437571
Order No.1437583
Order No.1437586
Order No.1437631
Order No.1437632
Order No.14376381437672*
Order No.14376391437673*
Siemens
Fanuc
Heidenhain
Order No.1437680
Order No.1437721
Order No.1437725
Order No.1437726
Order No.1437727
*For machining centres of the 18 Series starting from year of construction 2013
8 I8 I
Training - Service and maintenance
CHIRON Training
Facts
I Duration 4 daysI Dates on request
I Participants Max. 5 participantsI Location CHIRON Werke, Tuttlingen, Germany
www.chiron.dewww.chiron.de
Service and maintenance training [ 04 - 13 ]
Operator training [ 16 - 17 ]
Programming training [ 18 - 23 ]
Component training [ 24 - 25 ]
Robot training [ 26 - 27 ]
Customer-specific training [ 28 - 29 ]
Service and maintenance training for 5-axis machining centres
After training has been completed, the training participants should be able to carry out maintenance according to schedule, find malfunctions to a limited degree and be able to properly rectify them.
Target group:Service, maintenance andrepair personnel
Conditions:Basic knowledge on how to work with CNC machining centres, technical vocational training or practical experience with CNC machining centres
Topics:I Safety and accident prevention regulationsI Operation and handling, as well as the mechanical and electrical setup of the machineI Maintenance and repair for early error detectionI Geometrical checkI Check and setting of machine-specific reference pointsI Function and setup of the main spindle sectionI Function, setup and setting of pick-up tool changerI Function and setup of the CHIRON 2-axis swivel unitI Function and setup of background magazineI Data backup
We offer service and maintenance training for the following 5-axis machining centres:
Series
Spindle version
Control
Order No.1437550
Order No.1437573
Order No.1437585
Order No.1437588
Order No.1450923
Order No.1450924
Order No.1450926
Order No.1450927
Siemens
Fanuc
Heidenhain
Order No.1450929
Order No.1450931
Order No.1450925
Order No.1450932
Order No.1456838
10 I
Training - Service and maintenance
CHIRON Training
Facts
I Duration 4 daysI Dates on request
I Participants Max. 5 participantsI Location CHIRON Werke, Tuttlingen, Germany
www.chiron.de
Service and maintenance training [ 04 - 13 ]
Operator training [ 16 - 17 ]
Programming training [ 18 - 23 ]
Component training [ 24 - 25 ]
Robot training [ 26 - 27 ]
Customer-specific training [ 28 - 29 ]
Service and maintenance training for machining centres with swivel heads
After training has been completed, the training participants should be able to carry out maintenance according to schedule, find malfunctions to a limited degree and be able to properly rectify them.
Target group:Service, maintenance andrepair personnel
Conditions:Basic knowledge on how to work with CNC machining centres, technical vocational training or practical experience with CNC machining centres
Topics:I Safety and accident prevention regulationsI Operation and handling, as well as the mechanical and electrical setup of the machineI Maintenance and repair for early error detectionI Geometrical checkI Check and setting of machine-specific reference pointsI Function and setup of the main spindle sectionI Function, setup and setting of pick-up tool changerI Function and setup of the swivel axisI Function and setup of background magazineI Data backup
We offer service and maintenance training for the following machining centres withswivel heads:Series
Spindle version
Steuerung
Order No.1437549
Order No.1437572
Order No.1437584
Order No.1437587
Order No.1437728
Order No.1437729
Order No.1437730
Siemens
Fanuc
Heidenhain
12 I
Training - Service and maintenance
CHIRON Training
Facts
I Duration 4 daysI Dates on request
I Participants Max. 5 participantsI Location CHIRON Werke, Tuttlingen, Germany
www.chiron.de
Service and maintenance training [ 04 - 13 ]
Operator training [ 16 - 17 ]
Programming training [ 18 - 23 ]
Component training [ 24 - 25 ]
Robot training [ 26 - 27 ]
Customer-specific training [ 28 - 29 ]
Service and maintenance training for machining centres with MT technology
After training has been completed, the training participants should be able to carry out maintenance according to schedule, find malfunctions to a limited degree and be able to properly rectify them.
Target group:Service, maintenance andrepair personnel
Conditions:Basic knowledge on how to work with CNC machining centres, technical vocational training or practical experience with CNC machining centres
Topics:I Safety and accident prevention regulationsI Operation and handling, as well as the mechanical and electrical setup of the machineI Maintenance and repair for early error detectionI Geometrical checkI Check and setting of machine-specific reference pointsI Function and setup of the main spindle sectionI Function, setup and setting of pick-up tool changerI Function and setup of tool disc turretI Function and setup of background magazineI Data backup
We offer service and maintenance training for the following machining centres withMT technology:Series
Spindle version
Control
Order No.1437575
Order No.1437576
Order No.1437591
Order No.1437592
Siemens
Fanuc
14 I
Training
CHIRON Training
www.chiron.de
Service and maintenance training [ 04 - 13 ]
Operator training [ 16 - 17 ]
Programming training [ 18 - 23 ]
Component training [ 24 - 25 ]
Robot training [ 26 - 27 ]
Customer-specific training [ 28 - 29 ]
Ahead through optimum preconditions
In our training rooms at the CHIRON Forum in Tuttlingen, we offer optimal conditions in almost 700 square meters of space!
Take advantage of our professional training area with high-quality equipment. This makes the best possible training efficiency possible through practical training on the object.
16 I
Training - Operation
CHIRON Training
Operator training, 2 days
After completing training, the trai-ning participants should be able to understand how to basically handle the machine.
Target group:Operators, setters, maintenance andservice personnel
Prerequisites:None or little basic knowledge of CNC programming
Topics:I Safety and accident prevention regulationsI JOG / JOG-INC mode, conventional methodI Programming input via keyboardI Program editingI Entering tool correctionsI MDA mode, manual inputI Running a programI Setting modeI Alarms and signals FactsI How to work with documentation
Facts
I Duration 2 daysI Dates on request
I Participants Max. 5 participantsI Location CHIRON Werke, Tuttlingen, GermanyI Order Number 1450921
www.chiron.de
Service and maintenance training [ 04 - 13 ]
Operator training [ 16 - 17 ]
Programming training [ 18 - 23 ]
Component training [ 24 - 25 ]
Robot training [ 26 - 27 ]
Customer-specific training [ 28 - 29 ]
Operator training, 3 days
After completing training, the trai-ning participants should be able to understand how to basically handle the machine.
Target group:Operators, setters, maintenance and service personnel
Conditions:None or little basic knowledge of CNC programming
Topics:I Safety and accident prevention regulationsI JOG / JOG-INC mode, conventional methodI Programming input via keyboardI Program editingI Entering tool correctionsI MDA mode, manual inputI Running a programI Setting modeI Alarms and signalsI How to work with documentationI Siemens tool managementI Calibrating probesI Maintenance cyclesI Block search
Facts
I Duration 3 daysI Dates on request
I Participants Max. 5 participantsI Location CHIRON Werke, Tuttlingen, GermanyI Order Number 1450922
18 I
Training - Programming
CHIRON Training
Programming training, basic course
After the programming training has been completed, the training partici-pant should be able to createmachining programs and enter these in the control.
Target group:Operators, setters, maintenance and service personnel
Conditions:None or little basic knowledge of CNC programming
Topics:I Safety and accident prevention regulationsI Functional description of the machinesI Basics of CNC programmingI Machine commandsI Drilling and milling cyclesI Milling with radius correctionI Circular interpolationI Polar coordinatesI Contour program
Facts
I Duration 4 daysI Dates on requestI Participants Max. 10 participants
I Location CHIRON Werke, Tuttlingen, GermanyI Control / Order Number Siemens / 1437488 Fanuc / 1437502 Heidenhain / 1437505
www.chiron.de
Service and maintenance training [ 04 - 13 ]
Operator training [ 16 - 17 ]
Programming training [ 18 - 23 ]
Component training [ 24 - 25 ]
Robot training [ 26 - 27 ]
Customer-specific training [ 28 - 29 ]
Programming training, advanced course
After the programming training has been completed, the training partici-pant should be able to create drilling and contour programs and enter these in the control.
Target group:Operators, setters and programmers
Conditions:Basic Siemens programming training course or basic knowledge of CNC programming
Topics:I Safety and accident prevention regulationsI Functional description of the machinesI Machine commandsI Drilling and milling cyclesI Milling with radius correctionI Circular interpolationI Polar coordinatesI Contour programI Basics of subroutine techniquesI Simple program jumps and control structuresI REPEAT functionI Soft starting and stoppingI ROT, TRANS, MIRROR, SCALE
Facts
I Duration 5 daysI Dates on requestI Participants Max. 10 participants
I Location CHIRON Werke, Tuttlingen, GermanyI Control / Order Number Siemens / 1437489
20 I
Training - Programming
CHIRON Training
Programming training, swivel cycles for table kinematics
Facts
After completing training, the training participants should be able to practically use table kinematics swivel cycles.
Target group:Operators, setters and programmers
I Duration 5 daysI Dates on requestI Participants Max. 5 participants
Conditions:DIN / ISO programming knowledge and its practical application
I Location CHIRON Werke, Tuttlingen, GermanyI Control / Order Number Siemens / 1437501 Fanuc / 1437504 Heidenhain / 1437507
Topics:I Safety and accident prevention regulationsI Functional description of the machinesI Machine commandsI Drilling and milling cyclesI Milling with radius correctionI Contour programI Swivel cycle basicsI Deactivation of a swivel data blockI Machining examples with FIVE-AXIS machining centresI Afterwards simulation of the NC-program with CHIRON virtual machine
Control-specific training content
I Siemens CYCLE 800 input maskI Fanuc swivel cycle G68.2 and CHIRON swivel cycles G800 – G803I Swivel machining with Heidenhain cycle 19 and plane function
www.chiron.de
Service and maintenance training [ 04 - 13 ]
Operator training [ 16 - 17 ]
Programming training [ 18 - 23 ]
Component training [ 24 - 25 ]
Robot training [ 26 - 27 ]
Customer-specific training [ 28 - 29 ]
Programming training, swivel cycles for swivel head kinematics
Facts
After completing training, the training participants should be able to practically use swivel head kinematics swivel cycles.
Target group:Machine operators, setters and programmers
I Duration 5 daysI Dates on requestI Participants Max. 5 participants
Conditions:DIN / ISO programming knowledge and its practical application
I Location CHIRON Werke, Tuttlingen, GermanyI Control / Order Number Siemens / 1437490 Fanuc / 1437503 Heidenhain / 1437506
Topics:I Safety and accident prevention regulationsI Functional description of the machinesI Machine commandsI Drilling and milling cyclesI Milling with radius correctionI Contour programI Swivel cycle basicsI Deactivation of a swivel data blockI Machining examples with swivel head machining centresI Retracting in swung systemI Afterwards simulation of the NC-program with CHIRON virtual machine
Control-specific training content
I Siemens CYCLE 800 input maskI Fanuc swivel cycle G68.2 and CHIRON swivel cycles G800 – G803I Swivel machining with Heidenhain cycle 19 and plane function
22 I
Training - Programming
CHIRON Training
Programming training for machining centres with MT technology
Facts
After the programming training has been completed, the training participant should be able to create turning and milling programs and run these on several channels.
Target group:Operators, setters andprogrammers
I Duration 5 daysI Dates on requestI Participants Max. 3 participants
Conditions:DIN / ISO programming knowledge,swivel cycles and their practicalapplication.
I Location CHIRON Werke, Tuttlingen, GermanyI Control / Order Number Siemens / 1441984 Fanuc / 1441985
Topics:I Safety and accident prevention regulationsI Functional description of the machinesI Explanation of the machine componentsI Machine commandsI Drilling, milling and turning cyclesI Multi-channel programmingI How to work with swivel cyclesI Afterwards simulation of the NC-program with CHIRON virtual machine
www.chiron.de
Service and maintenance training [ 04 - 13 ]
Operator training [ 16 - 17 ]
Programming training [ 18 - 23 ]
Component training [ 24 - 25 ]
Robot training [ 26 - 27 ]
Customer-specific training [ 28 - 29 ]
Programming training, probes
Facts
After completing the probe training, the training participants should be able to practically use measurement programs and probes.
Target group:Operators, setters and programmers
I Duration 2 daysI Dates on requestI Participants Max. 5 participants
Conditions:Basic knowledge in the operation ofthe respective Siemens / Fanuc /Heidenhain control.
I Location CHIRON Werke, Tuttlingen, GermanyI Control / Order Number Siemens / 1437510 Fanuc / 1437511 Heidenhain / 1437513
Topics:I Safety and accident prevention regulationsI Basic principles for measuring with probesI Result / supply parametersI Function test, probesI Calibrating probes, X, Y and Z axesI Workpiece measurement: Borehole, shaft, groove, web, surfaceI Determining the zero point: Borehole, shaft, groove, web, surface
24 I CHIRON Training
Facts
I Duration 5 daysI Dates on request
I Participants Max. 6 participantsI Location CHIRON Werke Tuttlingen, Germany
Additionally, two days on-site training are recommendet. Additional days on request
Training - Programming
www.chiron.de
Service and maintenance training [ 04 - 13 ]
Operator training [ 16 - 17 ]
Programming training [ 18 - 23 ]
Component training [ 24 - 25 ]
Robot training [ 26 - 27 ]
Customer-specific training [ 28 - 29 ]
Programming training CHIRON PROCESSLine
In this course you will become familiar with the functions and possibilities of the NX CAM module in the areas of 3-axis roughing, and 2- and 3-axis finishing and simple drilling. Using practical examples, the handling of NX CAM operations is demonstrated. In addition, the integra-tion and consistency of the ProcessLine / NX process chain is shown. The custo-mer‘s application environment is analysed and configured. Introduction to multi-sided milling.Selection of post-processor and out-put of an NC code. Calling up the virtu-al CHIRON machine for simulation of the NC code and collision check.
Target group:Manufacturing engineers, NC programming, Work preparation employees
Conditions:CAM experience of other systems
Follow-up courses:Appropriate follow-up courses are offe-red by CHIRON: Simultaneous 5-axis production milling, CAM turning, 2-channel machines, syn-chronisation manager.
Order Number:1500430
Topics:I Introduction into ProcessLine / Siemens NX I Structure of the operations navigator / program sequence / tools / geometry / processing methodI Basic sequence from the design to manufactureI Visualisation of tool path I Roughing complex geometries with the cavity milling moduleI Simple machining operations of flat surfaces with the face milling moduleI Simple drilling modules (drilling, countersinking, reaming, tapping) with the drilling moduleI Simulation of the machining and tool organisationI NC organisation, machine control and post-processorI 3-axis milling of complex 3D geometries with the Zlevel and fixed contour modulesI Machine simulation on the NC code
26 I
Training - Components
CHIRON Training
Facts
I Duration 4 hoursI Date on request
I Participants Max. 5 participantsI Location CHIRON Werke Tuttlingen, Germany
www.chiron.de
Service and maintenance training [ 04 - 13 ]
Operator training [ 16 - 17 ]
Programming training [ 18 - 23 ]
Component training [ 24 - 25 ]
Robot training [ 26 - 27 ]
Customer-specific training [ 28 - 29 ]
CHIRON DATALine
After the training, the participant should be able to profit in an optimal manner from the data / operating figures, to con-figure DataLine according to customer’s specifications and to adapt it to the intra-company needs.
Target group:Production manager, Group leaders
Conditions:Knowledge of the operations andprocesses within the own manufacturing
Order Number:1525590
Topics:I Bases of calculation of the OEE figuresI Optimization based on the OEE analysis and loss of availabilityI Identification of non-productive time of operationI Dashboard – Overview of the production
Configuration:I Adaption of the machining program (start-end-factor)I Definition of the shift scheduleI Definition of the downtime reason for iQuitI Sending of e-mailsI Utilization of NC loggerI Parts Overview, to find the outliers in the parts run-time
28 I
Training - Components
CHIRON Training
Balancing the main spindle
Facts
After completing balancing training, the training participants should be able to understand the setup and how to use the balancing device. The objective is to determine thecondition of the main spindle based on balancing tests and to correct this, if necessary.
I Duration 2 daysI Dates on requestI Participants Max. 5 participants
Target group:Maintenance and service personnel
Conditions:CHIRON service training, experience working with PC/laptop, programming knowledge
I Location CHIRON Werke, Tuttlingen, GermanyI Control / Order Number 1437516
Topics:I Safety and accident prevention regulationsI Setup and how to work with Hoffmann MI 2000 balancing deviceI Balancing main spindles of the 1st and 2nd levelI Error diagnosticsI Practical exercises
www.chiron.de
Service and maintenance training [ 04 - 13 ]
Operator training [ 16 - 17 ]
Programming training [ 18 - 23 ]
Component training [ 24 - 25 ]
Robot training [ 26 - 27 ]
Customer-specific training [ 28 - 29 ]
Circularity test with Renishaw Ballbar QC20
Facts
After completing training, the training participants should be able to understand the setup and how to use the Renishaw Ballbar. Based on measurement records, error diagno-stics are created and are rectified on CHIRON machine tools.
I Duration 2 daysI Dates on requestI Participants Max. 5 participants
Target group:Maintenance and service personnel
Conditions:CHIRON service training, experience working with PC/ laptop, programming knowledge
I Location CHIRON Werke, Tuttlingen, GermanyI Control / Order Number 1437517
Topics:I Safety and accident prevention regulationsI Determining circularity deviation with Renishaw Ballbar system QC20I Setup and handlingI MeasurementI Error diagnosticsI TroubleshootingI Practical exercises
30 I
Training - Robots
CHIRON Training
Facts
I Duration 3 daysI Dates on request
I Participants Max. 5 participantsI Location CHIRON Werke, Tuttlingen,GermanyI Order Number 1437515
www.chiron.de
Service and maintenance training [ 04 - 13 ]
Operator training [ 16 - 17 ]
Programming training [ 18 - 23 ]
Component training [ 24 - 25 ]
Robot training [ 26 - 27 ]
Customer-specific training [ 28 - 29 ]
Fanuc robot training
After completing robot training, the training participants should be able to operate the robot properly and to use it in setup mode taking the safety guidelines into account.
Target group:Operators, setters, programmers and ser-vice/maintenance personnel
Conditions:Technically-oriented vocational training or comparable practical experience
Topics:I Safety and accident prevention regulationsI Setup of the robot control and the i-Pendant hand-held operating deviceI Structure of a traversing commandI Handling of the robot controlI Coordinate systems of the robotI Teaching robot positionsI Manual control of robot grippersI Program creation and supplementationI Data backup (backup) on USB stick and PCMCIA cardI Fanuc palletizing (palletizing pattern B)I Practical exercisesI Minor maintenance work on robot (battery exchange)
32 I
Training - Customer-specific training
CHIRON Training
Facts
I Duration on requestI Participants The number of participants is agreed upon with you individually, depending on the training topic.
I Location / Order Number CHIRON Werke, Tuttlingen / 1437735 In your factory / 1437738
www.chiron.de
Service and maintenance training [ 04 - 13 ]
Operator training [ 16 - 17 ]
Programming training [ 18 - 23 ]
Component training [ 24 - 25 ]
Robot training [ 26 - 27 ]
Customer-specific training [ 28 - 29 ]
Customer-specific training
Customized training for your applications - If you have not found the training you need in our training program, please contact us.We would be happy to coordinate the content with you and design the training exactly to your needs.
34 I
CHIRON Training
CHIRON Training
www.chiron.de
Service and maintenance training [ 04 - 13 ]
Operator training [ 16 - 17 ]
Programming training [ 18 - 23 ]
Component training [ 24 - 25 ]
Robot training [ 26 - 27 ]
Customer-specific training [ 28 - 29 ]
Ahead through qualification, because knowledge leads to success.
I Trainers Our trainers are employees of CHIRON Werke GmbH & Co.KG, who have been excellently trained for your trainer activity. In addition, our trainers are or were also project managers or employees in our customer projects and bring a great wealth of experience and practical knowledge into the training programs.
I Seminar documents The extensive seminar documents will be anindispensable reference in your daily work routine.
I Meals Lunch and drinks are included in the seminar fees.
I Certificate You will receive a certificate from us after successfully participating in CHIRON training.
I Travel / Hotel After your registration, you will receive detailed information for how to get to our CHIRON Forum as well as a list of hotels.
I Consulting Our training department will be happy to help you with any questions you have regarding training content, dates and reservations - Give us a call or send us an e-mail:
Tel: +49 (0) 7461 / 940-0 E-mail: [email protected]
Tuttlingen
Bangalore
Taicang
Beijing
Istanbul
Charlotte
KrakówParis
Milan
v 2.
0 / 0
7.16
/ SE
DA
/ TD
/ Pr
inte
d in
Ger
man
y / T
echn
isch
e Ä
nder
unge
n vo
rbeh
alte
n
CHIRON Werke GmbH & Co. KG
Kreuzstraße 7578532 Tuttlingen, Deutschland
Tel. +49 7461 940-0Fax +49 7461 940-8000
36 Iwww.chiron.de
Tuttlingen
Bangalore
Taicang
Beijing
Istanbul
Charlotte
KrakówParis
Milan
CHIRON Training
I Germany
CHIRON Werke GmbH & Co. KGKreuzstraße 7578532 Tuttlingen, DeutschlandTel. +49 7461 940-0Fax +49 7461 [email protected]
CMS GmbHGewerbepark „take-off“ 12578579 Neuhausen ob Eck, DeutschlandTel. +49 7461 940-3700 Fax +49 7461 [email protected]
I France
CHIRON Technologiesde Production SAS14 Chemin de la Litte92390 Villeneuve-la-Garenne, Frankreich Tel. +33 1479 859 50Fax +33 1479 854 [email protected]
I Italy
CHIRON Italia S.p.A.Via Ambrosoli 4/C 20090 Rodano Millepini - MI, ItalienTel. + 39 02 953 211 02 Fax + 39 02 953 286 20 [email protected]
I Turkey
CHIRON IstanbulMakine Ticaret ve Servis Ltd. Şti. MURAT PAŞA Mahallesi ULUYOL Caddesi No:19 ISTANBUL TOWER Plaza Kat:13 D:59-6034040 Bayrampaşa - ISTANBULTel. +90 212 612 12 11Fax +90 212 612 48 [email protected]
I Poland
CHIRON POLSKA Sp. z o.o.ul. Darwina 4244-177 Paniówki, PoloniaTel. +48 32 342 2075Fax +48 32 240 [email protected]
I USA
CHIRON America INC.10950 Withers Cove Park DriveCharlotte, NC 28278, USATel. +01 704 587 95 26 Fax +01 704 587 04 [email protected]
I China
CHIRON Machine Tool (Beijing) Ltd. ChinaRm. 1805, NUO OfficeA2, Jianqtai Road, Chaoyang District,Beijing 100016, P.R. ChinaTel. +86 10 6598 9811Fax +86 10 6598 [email protected]
CHIRON Machine Tools (Taicang) Co., Ltd.No.1-1, Fada RoadTechnological Development Zone,Taicang 215413, Jiangsu ProvinceP.R. ChinaTel. +86 512 5367 0800Fax +86 512 5367 [email protected]
I India
CHIRON India Machine ToolsPrivate Limited#33, Naseer Affinity , 1st FloorMiller Tank Bund Road, Kaveriappa LayoutVasanth Nagar, Bangalore - 560 052, India Tel. +91 80 4905 6490Fax +91 80 4905 [email protected]
CHIRON partners
CHIRON Werke and subsidiaries
CHIRON worldwide
CHIRON Werke GmbH & Co. KG
Kreuzstrasse 7578532 Tuttlingen, Germany
Tel. +49 7461 940-0Fax +49 7461 940-53000
