China Grating Catalouge
description
Transcript of China Grating Catalouge
SUH HEUNG ENGINEERING CO.,LTD.1619-3, Songjeong-dong, Gangseo-gu, Busan, Korea(194B-7L, Nok San Industrial Complex)GRATING ENTERPRISE Dept: Tel. 82-51-831-1811, Fax.82-51-831-0021Plant Enterprise Dept: Tel. 82-51-831-1815, Fax. 82-51-831-1816http://www.shge.co.krE-mail: [email protected]
Quality SystemCertificationQuality SystemCertification
SUH HEUNG GRATINGSUH HEUNG GRATINGManufacturing of steel grating Hot Dip Galvanizing
SUH HEUNG GRATING 1619-3, Songjeong-dong, Gangseo-gu, Busan, Korea (194B-7L, Nok San Industrial Complex)GRATING ENTERPRISE Dept: Tel. 82-51-831-1811, Fax.82-51-831-0021 Plant Enterprise Dept: Tel. 82-51-831-1815, Fax. 82-51-831-1816http://www.shge.co.kr E-mail : [email protected]
SHU HEUNG GRATINGhttp://www.shge.co.kr
SHU HEUNG GRATINGhttp://www.shge.co.kr
Manufacturing Process
1. STRONG, LIGHTWEIGHT
SUH HEUNG GRATING isvery strong and light inweight. It consist of a lat-ticework of bearing barsand cross bars joined toeach other in a fixed con-figuration by projectionwelding.
2. EXCELLENT LIGHT ADMISSION AND VENTILATION
SUH HEUNG GRATING lightadmission and ventilationabilities are excellentbecause of its large open-ing area. It will keep thework surroundings cleanand light.
3. NON-SLIP AND SAFE
SUH HEUNG GRATING dis-play non-slip ability inevery direction therebyproviding a safe workingsurface.
4. BEAUTIFUL APPEARANCE
The latticework of bearingbars and cross bars willneatly match with anytypes of flooring in the fac-tory, ship, etc., and willmake a nice geometricalensemble.
5. EASY INSTALLATION AND REMOVAL
SUH HEUNG GRATING isdesigned and manufac-tured according to cus-tomer s specification andis easy to install. Becauseof our grating configura-tion, it fabricate easyremoval of grating.
6. GOOD MACHINABILITY
SUH HEUNG GRATING canreadily be pre-cut to thecustomers specificationsjust like plate, because thebars are joined in a fixedconfiguration.
7. ECONOMICAL
The price of SUH HEUNGGRATING is very reasonablethrough mass productionin our well managed plantsunder careful quality-con-trol.
8. COMFORTABLE CLEANING
It is easier to clean insidetrench because SUHHEUNG GRATING is made bygood design and carefulconsideration.
ProcessSUH HEUNG GRATING have been fabricated in strict accor-dance to N.A.A.M.M. (National Association of ArchitecturalMetal-Manufactures) specification and high quality governedby our TQC system. The following is the work process:
Features
Material
Auto Projection Welding
Cutting
End Plate Welding
Hot Dip Galvanizing
Final Shipment
SUN HEUNG GRATINGSUN HEUNG GRATING
SHU HEUNG GRATINGhttp://www.shge.co.kr
SHU HEUNG GRATINGhttp://www.shge.co.kr
Member Dimensions & Section CapabilityConstruction
Type of Loading Bearing Bar:I-BAR/FLAT-BAR/SERRATED-BAR/SERRATED I-BAR
Pitch of Loading Bearing Bar
CLOSE END TYPE CUT END TYPE
DIMENSION(mm)
MOMENT OFINERTIA(cm4) 0.605 1.251 2.083 3.221 4.609 6.432 8.488 13.960 21.387
0.484 0.782 1.096 1.464 1.844 2.573 3.086 4.295 5.703MODULUS OFSECTION (cm3)
BEAR
ING
BAR
TYPE I-BAR I-25 I-32 I-38 I-44 I-50 I-50-2 I-55 I-65 I-75
DIMENSION(mm)
DIMENSION(mm)
MOMENT OFINERTIA(cm4) 0.651 1.365 2.286 3.549 5.208 6.250 8.319 13.731 21.094
0.521 0.853 1.203 1.613 2.083 2.500 3.025 4.225 5.625MODULUS OFSECTION (cm3)
BEAR
ING
BAR
TYPE F-BAR F-25 F-32 F-38 F-44 F-50 F-50-2 F-55 F-65 F-75
DIMENSION(mm)
DIMENSION(mm)
MOMENT OFINERTIA(cm4)
MOMENT OFINERTIA(cm4)0.534 1.171 2.010 3.176 0.464 0.997 1.741
0.456 0.770 1.104 1.498 0.395 0.654 0.954MODULUS OFSECTION (cm3)
MODULUS OFSECTION (cm3)
BEAR
ING
BAR
CROSS (TWIS-
TED)
BAR
TYPE SERRATED-BAR SE-25 SE-32 SE-38 SE-44 SERRATED-I-BAR SE-I25 SE-I32 SE-I38
PITCH(mm) 12.5, 15, 30 30, 35.3, 40 35.3, 40
H25-H44 H50-H75 H80-H100 H25-H75 H80-H100
* Another size of grating may be manufactured in compliance with the customer s request.
5
5
5 5 5 5 5 5 5
5 5 5 5 6 6 6 6
25
25
25
5 5
5
66
6 8 8
8
12.5 15 25 30 35.3 40
32 38 44 25 32 38
32 38 44 50 50 55 65 75
3 3 3 3 3 4 4 4 4
5 5 5 5 7 7 7 7
32 38 44 50 50 55 65 75
Pitch of Bearing BarA center distance between the two bearing bars adjacent toeach other is called Pitch of bearing bar.Standard pitch is 12.5mm, 15mm, 25mm, 30mm, 35.3mm and40mm by the use.
Pitch of Cross BarA center distance between the two cross bars adjacent to eachother is called Pitch of cross bar, and its standard is 100mm.Both ends are divided by the width. The standard pitch of crossbar having 150mm wide-trench of U-type grating is 80mm.Since the pitch of cross bar is manufactured by a scale rangingfrom 50mm up to around 150mm according to its usages, yourconsultation is cordially invited, if desired.
F-Bar GratingThis is a readily available material for general usage and ismanufactured under strict quality control.
I-Bar GratingIn comparison with other material of the same weight, this isvery economical as well as good aesthetic gratings.
Serrated GratingThis model, with the surface of a FLAT-BAR serrated, isdesigned for foot steps and in particular it is best suitable fornon-slip stair-treads used in slippery places such as refineryplants, oil tankers as well as in steep slope or heavy snowfallarea.
SUN HEUNG GRATINGSUN HEUNG GRATING
SUH HEUNG GRATING
SHU HEUNG GRATINGhttp://www.shge.co.kr
Member Dimensions & Section Capability
Grating Width and Number of Bearing Bars
Unit Weight of Follr Grating (kg/m2)
The Width(w) of Grating is defined as the direction of main bars,and the Length as the one of cross bars.The Length is determined as shown below by the number, pitchand thickness of main bar. Maximum standard width is 995M/M.
34
993
995
996
29
993
994
995
26
1003
1005
1006
1007
67
993
80
991
33
963
965
966
28
958
959
960
25
963
965
966
967
66
978
79
978
FLAT BAR 25 5
FLAT BAR 32 5
FLAT BAR 38 5
I-BAR 25 5 3
I-BAR 32 5 3
I-BAR 38 5 3
I-BAR 44 5 3
I-BAR 50 5 3
I-BAR 50 7 4
I-BAR 55 7 4
I-BAR 65 7 4
I-BAR 75 7 4
32
933
935
936
27
923
924
925
24
923
925
926
927
65
963
78
966
31
903
905
906
26
888
889
890
23
883
885
886
887
64
948
77
953
30
873
875
876
25
852
853
854
22
883
885
886
887
63
933
76
941
29
843
845
846
24
817
818
819
21
803
805
806
807
62
918
75
928
28
813
815
816
23
782
783
784
20
763
765
766
767
61
903
74
916
27
783
785
786
22
746
747
748
19
723
725
726
727
60
888
73
903
26
753
755
756
21
711
712
713
18
683
685
686
687
59
873
72
891
25
723
725
726
20
676
677
678
17
643
645
646
647
58
858
71
878
24
693
695
696
19
640
641
642
16
603
605
606
607
57
843
70
866
23
663
665
666
18
605
606
607
15
563
565
566
567
56
828
69
853
22
633
635
636
17
570
571
572
14
523
525
526
527
55
813
68
841
21
603
605
606
16
535
536
537
13
483
485
486
487
54
798
67
828
20
573
575
576
15
499
500
501
12
443
445
446
447
53
783
66
816
19
543
545
546
14
464
465
466
11
403
405
406
407
52
768
65
803
18
513
515
516
13
429
430
431
10
363
365
366
367
51
753
64
791
17
483
485
486
12
393
394
395
9
323
325
326
327
50
738
63
778
16
453
455
456
11
358
359
360
8
283
285
286
287
49
723
62
766
15
423
425
426
10
323
324
325
7
243
245
246
247
48
708
61
753
14
393
395
396
9
287
288
289
6
203
205
206
207
47
693
60
741
13
363
365
366
8
252
253
254
5
163
165
166
167
46
678
59
728
12
333
335
336
7
217
218
219
4
123
125
126
127
45
663
58
716
11
303
305
306
6
182
183
184
3
83
85
86
87
44
648
57
703
10
273
275
276
5
146
147
148
2
43
45
46
47
43
633
56
691
PITCH30mm
BB No.
PITCH35.3mm
PITCH40mm
15mm
12.5mm
BB
BB
Bearing Bar
BB No.
BB No.
3
5
6
5
6
7
3
5
6
7
3
3
Cut End
28.3
35.6
41.5
23.1
27.8
32.2
36.6
40.1
56.8
61.4
71.3
81.5
Close End
30.3
38.1
44.5
25.1
30.3
35.2
40.1
44.0
61.5
66.6
77.4
88.6
Cut End
31.2
39.3
46.0
25.4
31.3
35.6
40.5
44.4
62.7
68.0
79.0
90.3
Close End
33.2
41.8
49.0
27.4
33.8
38.6
44.0
48.3
67.4
73.2
85.1
97.4
Cut End
36.3
45.6
53.6
29.5
36.1
41.4
47.1
51.5
62.8
68.1
79.1
90.4
Close End
38.2
48.1
56.6
31.4
38.6
44.3
50.6
55.5
67.5
73.2
85.2
97.4
30mm 35.3mm 40mmType
Bar Pitch
T
T
T
T
T
WIDTH (W)
LENG
TH (
L)
No.
No.SUH HEUNG
GRATING
SUH HEUNG ENGINEERING CO.,LTD.1619-3, Songjeong-dong, Gangseo-gu, Busan, Korea(194B-7L, Nok San Industrial Complex)GRATING ENTERPRISE Dept : Tel. 82-51-831-1811, Fax.82-51-831-0021Plant Enterprise Dept : Tel. 82-51-831-1815, Fax. 82-51-831-1816http://www.shge.co.kr E-mail: [email protected]
SUH HEUNG ENGINEERING CO.,LTD.1619-3, Songjeong-dong, Gangseo-gu, Busan, Korea(194B-7L, Nok San Industrial Complex)GRATING ENTERPRISE Dept : Tel. 82-51-831-1811, Fax.82-51-831-0021Plant Enterprise Dept : Tel. 82-51-831-1815, Fax. 82-51-831-1816http://www.shge.co.kr E-mail: [email protected]
SUN HEUNG GRATING
Symbol Beaning Bar Width 500 550 600 650 700 750 800 850 900 950 1000 1100 1200 A5.4 5.9 6.2 6.6 7.1 7.4 7.9 8.3 8.7 9.1 9.6 10.3 11.1 1204.5 5 5.3 5.7 6.2 6.5 7 7.4 7.8 8.2 8.7 9.5 10.2 -6.1 6.5 6.9 7.4 7.9 8.2 8.8 9.2 9.6 10.1 10.6 11.5 12.4 1505 5.5 5.9 6.4 6.9 7.2 7.8 8.2 8.6 9.1 9.6 10.5 11.3 -
6.7 7.2 7.6 8.1 8.7 9.1 9.6 10.1 10.6 11.1 11.7 12.6 13.6 1805.7 6.2 6.6 7.1 7.7 8.1 8.7 9.1 9.6 10.1 10.7 11.6 12.6 -6.2 6.7 7.2 7.7 8.2 8.6 9.2 9.7 10.1 10.6 11.2 12.1 13.1 1205.3 5.8 6.3 6.8 7.3 7.7 8.3 8.8 9.2 9.7 10.3 11.2 12.2 -7 7.5 8 8.5 9.2 9.6 10.2 10.8 11.3 11.8 12.4 13.5 14.5 150
5.9 6.5 7 7.5 8.1 8.6 9.2 9.7 10.2 10.8 11.4 12.4 13.5 -7.7 8.3 8.8 9.4 10.1 10.6 11.2 11.8 12.4 13 13.7 14.8 16 1806.5 7.1 7.7 8.3 8.9 9.4 10.1 10.7 11.3 11.8 12.5 13.7 14.8 -6.2 6.6 7.1 7.6 8.1 8.5 9 9.5 10 10.5 11 11.9 12.9 1205.4 5.9 6.3 6.8 7.3 7.7 8.3 8.8 9.2 9.7 10.2 11.2 12.1 -6.9 7.4 7.9 8.4 9 9.5 10.1 10.6 11.1 11.6 12.2 13.3 14.3 1506 6.5 7 7.5 8.1 8.6 9.2 9.7 10.2 10.7 11.3 12.4 13.4
7.6 8.2 8.7 9.3 9.9 10.4 11.1 11.7 12.2 12.8 13.5 14.6 15.7 1806.6 7.2 7.7 8.3 9 9.4 10.1 10.7 11.2 11.8 12.5 13.6 14.7 -7.3 7.9 8.5 9.1 9.8 10.3 10.9 11.5 12.1 12.7 13.4 14.5 15.7 1206.6 7.2 7.7 8.3 9 9.5 10.2 10.8 11.3 11.9 12.6 13.8 14.9 -8.2 8.9 9.5 10.2 10.9 11.5 12.2 12.9 13.5 14.2 14.9 16.2 17.5 1507.3 8 8.6 9.3 10 10.6 11.3 12 12.6 13.3 14 15.3 16.6 -9 9.8 10.5 11.2 12 12.6 13.4 14.2 14.9 15.6 16.4 17.8 19.3 180
8.1 8.8 9.5 10.2 11 11.6 12.5 13.2 13.9 14.6 15.4 16.9 18.3 -
SHU HEUNG GRATINGhttp://www.shge.co.kr
SHU HEUNG GRATINGhttp://www.shge.co.kr
Stair Treads
Tread Dimensions
Standard Dimension and Weights
InstallationStair treads have been so designed and manufactured as to be strong and nonslip for safe usage and good economy. Installations are 2 Types(WELDING TYPE and BOLTING TYPE)
WELDING TYPE BOLTING TYPE
ATTACHING BY WELDING
FASTENING WITH BOLTS
RECOMMENDED DIMENSIONRECOMMENDED DIMENSIONLoad bearing bars at 30mm pitch
215 245 275 305120 150 180 210
500, 600, 700, 800, 900950, 1050, 1200
I25 5 3t, I32 5 3t, F25 5t, F32 5t
SE25 5t, SE32 5t
WIDTH(mm)BOLT PITCH(A)
LENGTH(mm)
SIZE OF BEARINGBARS(H) WELDING TYPE
BOLTING TYPE
Length
20~80 100
Bearing Bar Nosing (used for checkered or nonslip plate)
Cross Bar
End PlateEnd Plate
65
4520
30 Pitch (A)
11
11 18LSlot Hole
Stair Treads
Stair Treads
Carrier Angle
L
5
5 5
5
A
B
5
Welding
Carrier AngleWelding
Bolt,NutsEnd Plate
L
30Pi
tch
H
Widt
h3
100
+0-3
+0-10
L
L +0-5
By Bolting
215
245
275
215
245
275
215
245
275
215
245
275
SI-25 I25 5 3
SF-25 F25 5
SF-32 F32 5
SI-32 I32 5 3
By Welding (Unit : kg)
SUN HEUNG GRATINGSUN HEUNG GRATING
SHU HEUNG GRATINGhttp://www.shge.co.kr
SHU HEUNG GRATINGhttp://www.shge.co.kr
Installation & TolerancesManufacturing Tolerances
1. BEARING BARS: - (Load Bars)Load carrying bars of uniform sectionin rolled steel spanning between sup-porting steel members.
2. CROSS RODS: - (Transverse Bars)Rods of uniform section in squaretwisted steel, electro-forged at rightangles to the load bars.
3. GRATING PANEL:Completed piece of grating, cut tosize, banded and notched as speci-fied by customer.
4. LENGTH OF GRATING PANEL: - “L”The overall measurement of a panelwhen measured parallel with the loadbars.
5. WIDTH OF GRATING PANEL: - “W”The overall measurement of a panelwhen measured parallel with thecross rods.
6. AREA OF GRATING PANEL: - (Gross Area)The total area of flooring including
cut-outs, notches etc. as used in esti-mating and invoicing (Area=L W).
7. END PLATE: - (Banding Bars)Finishing bar of same section as theload bar welded across the ends ofthe load bars also around cut-outsand notches where these occur.
8. KICK PLATE: - (Toe Plate)Heavy Section bars nominally stand-ing 100mm above walking surface offloor welded to the ends and sides ofpanels also around cut-outs andnothces where thes occur. N.B. KickFlat is only supplied when and wherespecified.
9. CUT TO SIZE ONLY: - Specifies that panels are to be sup-plied cut to the overall length onlyexclusive of end banding bars.
10. SERRATIONS: - Small notches made in the top edgeof the load bar to assist in skid resis-tance.
Min. Clearance Equalto rebate AngleTickness
NOTE:Clearance canvary relative to rebateangle straightness.
10mm 10mm
10mm 10mm10mm
10mm 10mm
All clearances shown are recommended only aspanels can vary dimensionally in accordance with themanufacturing standards.We recommend that cutouts around circularobstructions be 50mm greater in diameter than theobstruction and we suggest that piping cutouts,nominally 100mm ofless in diameter be done on siteduring installation
SPAN(DIRECTION OF BEARING BARS)
PANEL LENGTH PANEL LENGTH
10mm
10mm
30mm 12.5m
m25
mm35.3m
m, 40
mm
Varie
sPa
nel W
idth
Pane
lWi
dth
Nominal
Nominal
Load Bar(typical)
Specified Cut-out89 152Actual Cut-out116 152
Glossary of TermsStandard Manufacturing Tolerances
Cross Bar Ailgnment and Spacing
SUN HEUNG GRATINGSUN HEUNG GRATING
SHU HEUNG GRATINGhttp://www.shge.co.kr
SHU HEUNG GRATINGhttp://www.shge.co.kr
Special Type GratingInstallation & Tolerances
Fastening MethodsIt is important to note that when there is no lateral restraint provided by the support structure, a minimum of four clips per panelmust be used to restrain floor panels. Where larger panels are to be fixed it is advisable to use extra clips on any available intermedi-ate supports.
Non Standard RequirementS.H Gratings are manufactured in numerous combinations of bearing bar height and thickness, bearing bar pitch and cross bar pitch.Our complete range of gratings should cover the requirement for any projects. However, for any other combinations, please contactour sales/marketing department.
1. SADDLE CLIP
5. J-BOLT/NUT
4. FIELD WELDING3. SELF-DRILLING FASTENER
2. UPPER/LOWER CLIP
6. J-HOOK BOLTCLIP
BOLT NUT
SADDLECLIP
SOLT
FIELD WELD
SADDLECLIP
LOWERCLIP
M8
FIELD WELD
J-HOOK BOLTSADDLECLIP
SADDLECLIP
J-HOOK BOLT
J-HOOK BOLT
SADDLECLIP
TYPE “B” TYPE “C”
TYPE “A”
SUN HEUNG GRATINGSUN HEUNG GRATING
A p p l i c a t i o n o f V e h i c l e sDirection of Vehicles
SHU HEUNG GRATINGhttp://www.shge.co.kr
SHU HEUNG GRATINGhttp://www.shge.co.kr
Trench Cover
This is used for coveringof trenches on drainslinking roads tobuildings, housingestates, etc.When installed, itharmonises with thesurrounding area,enhancing its beauty andcleanliness.
SECTION /A-/A
7.812.211.713.217.315.714.6
Total Weight27.129.541.448.051.462.675.3
Support Frame9.59.511.612.212.213.014.0
GRATING17.620.029.835.839.249.661.3
ANGLE SIZEL-50 50 6L-50 50 6L-56 61 6L-61 61 6L-61 61 6L-71 61 6L-81 61 6
H50505661617181
A322372422472522572622
CROSS BAR6688888
Bearing BarI-44I-44I-50-2I-55I-55I-65I-75
h44445055556575
b995995995995995995995
a300350400450500550600
200250300350400450500
ST 20-44ST 25-44ST 30-50ST 35-55ST 40-55ST 45-65ST 50-75
T-20 LOADING
T-14 LOADING
T-6 LOADING
T-2 LOADING
SYMBOLTRENCHWIDTH(mm)
DIMENSION(mm)GRATING SUPPORT FRAME
WEIGHT(kg) UNITSTRESS
(kg/mm2)
15.214.214.714.914.914.117.4
Total Weight16.121.527.234.241.350.954.0
Support Frame3.36.57.79.511.611.611.6
GRATING12.815.019.524.729.739.342.4
ANGLE SIZEL-30 30 3L-40 40 5L-45 45 5L-50 50 6L-56 61 6L-56 61 6L-56 61 6
H30404550565656
A320370422472522572622
CROSS BAR6666688
Bearing BarF-25I-32I-38I-44I-50I-50-2I-50-2
h25323844505050
b995995995995995995995
a300350400450500550600
200250300350400450500
ST 20-25ST 25-32ST 30-38ST 35-44ST 40-50ST 45-50ST 50-50
SYMBOLTRENCHWIDTH(mm)
DIMENSION(mm)GRATING SUPPORT FRAME
WEIGHT(kg) UNITSTRESS
(kg/mm2)
7.611.316.216.111.713.615.4
Total Weight16.118.019.825.327.128.930.7
Support Frame3.33.33.36.56.56.56.5
GRATING12.814.716.518.820.622.424.2
ANGLE SIZEL-30 30 3L-30 30 3L-30 30 3L-40 40 5L-40 40 5L-40 40 5L-40 40 5
H30303040404040
A320370420470520570620
CROSS BAR6666666
Bearing BarF-25F-25F-25I-32I-32I-32I-32
h25252532323232
b995995995995995995995
a300350400450500550600
200250300350400450500
ST 20-25ST 25-25ST 30-25ST 35-32ST 40-32ST 45-32ST 50-32
SYMBOLTRENCHWIDTH(mm)
DIMENSION(mm)GRATING SUPPORT FRAME
WEIGHT(kg) UNITSTRESS
(kg/mm2)
10.211.412.311.114.515.312.214.2
Total Weight19.725.131.844.547.754.866.584.3
Support Frame6.57.79.511.611.612.213.014.0
GRATING13.217.422.332.936.142.653.570.3
ANGLE SIZEL-40 40 5L-45 45 5L-50 50 6L-56 61 6L-56 61 6L-61 61 6L-71 61 6L-81 61 6
H4045505656617181
A322372422472522272622722
CROSS BAR66688888
Bearing BarI-32I-38I-44I-50-2I-50-2I-55I-65I-75
h3238445050556575
b995995995995995995995995
a300350400450500550600700
200250300350400450500600
ST 20-32ST 25-38ST 30-44ST 35-50ST 40-50ST 45-55ST 50-65ST 60-75
SYMBOLTRENCHWIDTH(mm)
DIMENSION(mm)GRATING SUPPORT FRAME
WEIGHT(kg) UNITSTRESS
(kg/mm2)
Grating Width(b)
Bearing Bar Closs Bar/A
/A
5mm5mm
5mm 5mm
Clearance
Clearance
Frame(A)
Grating Length(a)
Trench WidthAnchor
Fram
e Heig
htGrat
ing
Heig
ht
h
Anchor F32 150mm
Normal Dimensiln 1,000Actual Dimension 995
ST 30 - 50
Trench Width 300mm
Hight of bearing Bar 50mm
SUN HEUNG GRATINGSUN HEUNG GRATING
SHU HEUNG GRATINGhttp://www.shge.co.kr
SHU HEUNG GRATINGhttp://www.shge.co.kr
Bearing Bar
Grating Dimension(b)
Cross BarGrating Length(a)
Trench Width(mm)
/A
/A
H H1H2
SECTION /A-/A
This is fabricated in a same height of the concrete cover and able to replaceeasily with the concrete cover.
Bearing Bar Cross Bar
/AA
Hinge pinBearing Bar Cross Bar
Frame(A)
Grating(a)Hinge pin
Pit(mm)
Grat
ing
Heig
ht
Fram
e Heig
ht
h H
/A
/A
a
a
Trench Width(mm)
Grating Length
/AAngle (End Plate)
Grating Dimension(b)SECTION /A-/A
SECTION /A-/A
Tubular Type Trench Cover U-Type Trench Cover
Drainage Pit Cover (120 Open Type)
SUN HEUNG GRATINGSUN HEUNG GRATING
SUH HEUNG GRATINGHHoott RRoolliinngg MMiillll sstteeeell BBaarr PPrroodduuccttss
AAuuttoo PPrroojjeeccttiioonn WWeellddiinngg
SANGWON CO.,LTD.27, Hongchun-ri, Lipjang-myun, Chonan-City,choonqnam, KoreaTel. 82-41-587-6181 Fax. 82-41-587-6180E-mail: info@sangwons,comhttp://www.sangwons,com
SUH HEUNG ENGINEERING CO.,LTD.SUH HEUNG ENGINEERING CO.,LTD.
1619-3, Songjeong-dong, Gangseo-gu, Busan, Korea(194B-7L, Nok San Industrial Complex)GRATING ENTERPRISE Dept: Tel. 82-51-831-1811, Fax.82-51-831-0021Plant Enterprise Dept: Tel. 82-51-831-1815, Fax. 82-51-831-1816http://www.shge.co.kr E-mail: [email protected]
Process And Products
COMPANY PROFILEWe SANGWON CO., LTD. are pleased to introduce ourselves, our products and our fullyautomatic production facilities.SANGWON CO., LTD. was established in 1991 as an incorporation of company.SANGWON CO., LTD. has been producing steel grating and steel structure in domestic andoverseas markets enjoying a good reputation from many customers.In order to diversify our business and to contribute the development of the “Korean Iron andSteel Industry”, SANGWON CO., LTD.manufactures and exports the steel products such as I-Bar, Flat Bar, Serrated bar, Serrated I-bar, Round Bar in midium and small size bar with various specification owing to “AutomaticContinuous Hot Rolling Line” with it’s annual capacity of 50,000 M/T in Chonan factory.SANGWON CO., LTD. has a plan to supply excellent quality products that have passed our rigidproduction controls and quality assurance management procedures for all our customers
Flat Bar & I-BarI-Bar and Flat Bar are products of excellentquality which have various industrial applications.These types of steel bar can be used as bearingbars for “steel grating”, structure steel for bridgeand shipbuilding and as structural parts forgeneral machine.
BILLET
REHEATING
ROUGHING MILL
FINISHING MILL FINISHING MILL
Serrated Flat Bar & Serrated I-BarOur Serrated Flat Bar and I-Bar are used toprevent slipping and are applied widely in oilrefineries, chemical plants and industrial plants.
SUN HEUNG GRATING SANGWON CO., LTD.
I-BARWidth(H):25 75mmThickness: (T)5 7mm
(T-1)3 4mm
FLAT BARWidth(H):19 75mmThickness: (T)3 16mm
SERRATED BARWidth(H):25 50mmThickness: (T)3 5mm
SERRATED I-BARWidth(H):25 38mmThickness: (T)5mm
Machinery
PROJECTION WELDING MACHINE GRATING TYPES
970 Series for 2 cross bar feedingPROJECTION WELDING MACHINE / GENERAL SPECIFICATIONS FOR SH-GW1-970/2
SUH HEUNG Grating come in 4 different bearing bar construction.
This equipment is a grating projection welding machine utilizing the series, Projection Welding method for synchronous multi-pointwelding, where by 26, 29 or 34 bearing-bar (each 5-7M long) are set in the flow direction of the menufacturing line over which 2Cross-bars are fed automatically, at right-angles.
Second-hand machines after overhauling is available.
Power load : 1200KVAMax. electrode pressure : 180tonWelding width : 545mm-995mmBEARING BAR SIZE : FROM FB 19mm 3t To FB65mm 6t, FROM IB25mm 5 3t To IB55mm 7 4t
Max. welding capacity : 34 bars at 30mm pitch / 29 bars at 35.3mm pitch, etcAuxiliary equipments like front roller, rear roller and nipping machines are included.
450 Series for 1 cross bar feedingPROJECTION WELDING MACHINE / GENERAL SPECIFICATIONS FOR SH-GW1-450/2This equipment is a grating projection welding machine utilizing the Projection Welding method for synchronous multi-point weld-ing, where by 29 or 34 bearing-bars are set in the flow direction of the menufacturing line over which 1 Cross-bars are fed automati-cally, at right-angles.
Second-hand machines after overhauling is available.SUH HEUNG designs and manufactures equipment and machinery for the production of steel grating.We are incorporated with 30-years experience and technical expertise into the manufacturing process of steel fabrication as well asthe production of machinery and steel grating.
Power load : 900KVA-three phasePower of hydraulic motor : 37kwWelding width : 995mm (approx 1000mm)BEARING BAR SIZE : FROM FB 19mm 3t To FB75mm 6t, FROM IB25mm 5 3t To IB55mm 7 4t
Max. welding capacity : 34 bars at 30mm pitch / 29 bars at 35.3mm pitch, etcAuxiliary equipments like front roller, rear roller and nipping machines are included.
three(3) line of auto projection weldingSUH HEUNG Steel grating welder is automatic projection welding various bars in production of steel grating.There are standard models.SUH HEUNG designs and manufactures steel grating welder, special purpose to requirement.
FB-TYPE(Flat Bar Grating)
IB-TYPE(I-Bar Grating)
SF-TYPE(Serrated Flat Bar Grating)
SI-TYPE(Serrated I-Bar Grating)
SUN HEUNG GRATING SANGWON CO., LTD.
Hot Rolling Mill Steel Bars
SANGWON CO., LTD. has installed a hot roling mill line for the production of a variety of items and specifications based on customer’sneeds. The steel Billet, reheating capacity of 20 ton per hour providing the computer controlled Tandem Mill with continuous produc-tion. at world class performance will meet or exceed your expectations.
Hot Dip GalvanizingHot Dip Galvanizing
SANGWON CO., LTD.
SUH HEUNG ENGINEERING CO,.LTD.1619-3, Songjeong-dong, Gangseo-gu, Busan, Korea(194B-7L, Nok San Industrial Complex)GRATING ENTERPRISE Dept: Tel. 82-51-831-1811 Fax.82-51-831-0021Plant Enterprise Dept: Tel. 82-51-831-1815 Fax. 82-51-831-1816http://www.shge.co.krE-mail: [email protected]
SHU HEUNG ENGINEERINGhttp://www.shge.co.kr
SHU HEUNG ENGINEERINGhttp://www.shge.co.kr
ProcessInformation Systems
Facilities Coating By Hot-Dip-Galvanizing
Characteristics of Zinc Coating’s Durable Property of Anti-corrosion
In the air, under the water, in the soil and evenwithin concrete mixtures, Hot dip galvanizingdisplays magnificent and consistent anti-rust andanti-corrosive characteristics.
Products coated by the hot zinc galvanizing methodpossess ideal properties. They form an anti-rust filmfor iron/steel and, is most economic whencompared to any other method of treatment as itdisplays anti-rust durability against rust in the air,under water, in the soil and concrete mixtures.
Ranging from electric power and communicationuses, such as iron-tower for power transmissionlines, electric pole and other electric powermachinery, to engineering works, architecture,agriculture, livestock and fisheries zinc-coatedproducts are utillised in various fields of industry,and thus zinc-coating has become indispensible toour daily needs in modern life.
1. Works to Protect the skin-film:A delicate, thin film is created on the surface of the meltedzinc skin and this obstructs the process of corrosion there-after.
2. Sacrificial Devotion to Anticorrosive:In case the surface film of zinc coating is damaged for anyreason, the iron/steel corrosive effect will be kept undercontrol, due to the action of the zinc surround, whichbecomes positive ionizing, and thus, functions in a self-sacrificial manner acts as an anticorrosive in order toprotect the iron/steel material by the effect of electro-chemical action.
Such zinc’s sacrificial action as an anticorrosive for iron/steelis a specific character which zinc possesses.
Calculation made above is based on the result gained intermediatelyconducted by Japan’s Hot-Dip zinc Galvanizaing Association.
3. Hot-Dip Galvanizer’s Standing Years
Standing Time of Hot Dip Galvanizing (year)
When compared with painting, it shows as following figure.
a Heavyindustrialdistrict
a Seasidedistrict
a Rural district
a Urbandistrict
Weight of zincCosting
an Atrnosphericcondition
Corrosion(g/m2/year) 31.1 12.4 7.1 15.7
11.6 29.0 50.7 22.9
32.8 12.5 7.2 16.0
13.7 36.0 62.5 28.1
31.1 12.3 6.7 15.9
17.4 43.9 60.6 34.0
400
g/m
2
Standing time(year)
Corrosion(g/m2/year)
500
g/m
2
Standing time(year)
Corrosion(g/m2/year)
600
g/m
2
Standing time(year)
Amount of Galvanzing (g/ )
SUN HEUNG GRATING SUN HEUNG GRATING
SUH HEUNG ENGINEERING CO.,LTD.1619-3, Songjeong-dong, Gangseo-gu, Busan, Korea(194B-7L, Nok San Industrial Complex)GRATING ENRERPRISE Dept: Tel. 82-51-831-1811 Fax.82-51-831-0021Plant Enterprise Dept: Tel. 82-51-831-1815 Fax. 82-51-831-1816http://www.shge.co.krE-mail: [email protected]
SHU HEUNG ENGINEERINGhttp://www.shge.co.kr
SHU HEUNG ENGINEERINGhttp://www.shge.co.kr
Specification of Galvanizing
KS, JIS CODE (KS D 8308, JIS H 8641)
Weight of Zinccoating
g/m2
MarkGrade
1
2
3
Equivalentthickness
m
Number ofuniformity
Tests
A ZHD A - - 4 timesB ZHD B - - 5times35 ZHD 35 350 Min 49 -40 ZHD 40 400 Min 56 -45 ZHD 45 450 Min 63 -50 ZHD 50 500 Min 70 -55 ZHD 55 550 Min 77 -
35A ZHD 35A 350 Min 49 4 time Min40A ZHD 40A 400 Min 56 4 time Min40B ZHD 40B 400 Min 56 5 time Min45B ZHD 45B 450 Min 63 5 time Min50B ZHD 50B 500 Min 70 5 time Min55C ZHD 55C 550 Min 77 6 time Min
SATM CODE
Designation
Class of material
Minimum weight of zinc coating
QZ/ft2 ( m )
Any individualspecimen
Average ofspecimens
tested
Product fabricated from rolled,pressed and forged steel shapes,plates, bars and strip1/8 , 3/161/4
A123
A153 2.00(85) 1.80(77)
2.00(85) 1.80(77)
1.50(64) 1.25(53)
1.50(64) 1.25(53)
1.25(53) 1.00(42)
1.25(53) 1.00(42)
1.00(42) 0.85(36)
1.00(42) 0.85(36)
2.00(85.5) 1.80(77)
2.00(85) 1.80(77)
A386
1.30(55.5) 1.10(47)
2.00(85)2.30(98)
1.80(77)2.00(85)
Class A-Castings-Malleable iron,steelClass B-Rolled, pressed and
forged articles (exceptthose that would beincluded under class Cand D)
Class C-Bolts and drive screws (over 3/8 (9.52mm) indiameter) and similararticles. Washes 3/16and 1/4 (4.76mm and6.35mm) thick
Class C-Bolts and drive screws (over 3/8 (9.52mm) indiameter) and similararticles.
Class D-Bolts and drive screws (3/8 (9.52mm) andunder in diameter) andsimilar articles
Class D-Screws, stove bolts, and bolts (3/8 and under indiameter), revets, andsimilar articles.Washers under 3/16thick
Class A-Castings gray iron, malleable iron, steel
Class B-Rolled, pressed and forged steel
B-1-3/16 (4.76mm) and over in thickness and over 8(203.2mm) in length
B-1-3/16 (4.76mm) and over in thickness
B-2-Under 3/16 in thickness and over 8 in length
B-2-Under 1/16 (4.76mm) in thickness
B-3-8 and under in length and any thickness
BS CODE (BS729)
Minimum averagecoating Weight forany individual test
area.gr/m2
CategoryEquivalentthickness
m
Steel whichare not centrifuged
Grey and malleable iron castings
Threaded work and other articleswhich are centrifuged
5mm thick or more 610 85
460 64
335 47
610 85
305 43
under 5mm but notless than 2mm
under 2mm but notless than 1mm
SUN HEUNG GRATING