CHETRA Machinery for Mining & Construction

CONCERN “TRACTOR PLANTS”FULL PRODUCT RANGE

Russia, 2015

PRODUCTS

INDUSTRIAL MACHINERY

MUNICIPAL & AGRICULTURAL

MACHINERY

PRODUCTS FOR RAILWAYS

FORESTRY MACHINERY

SPARE PARTS AND OEM COMPONENTS

2

“CHETRA” – registered trade mark for industrial machinery (dozers, pipelayers, excavators, forestry

and municipal machines) manufactured by CTP.

“AGROMASH” – registered trade mark for agricultural machinery (wheel & crawler tractors,

combine harvesters) produced by CTP.

INDUSTRIAL MACHINERYINDUSTRIAL MACHINERY

3

T6 T9 T11 T15 T20 T25 T35 T40Operating power, kW/HP 73,5/100 110/150 137/187 180/245 232/315 308/419 360/490 435/590Operating weight, t 9 17 20 28 32,5 45 60 65

САТ analog D5 D6N D6R D7R D8R D9R - D10T

CRAWLER BULLDOZERS

CHETRA T6

Engine: AMZ A-41SI-03Engine power, kW/h.p.–73,5/100 Operating weight, kg – 9 400Ground pressure, kgf/cm² – 0.41Shoe width – 460 mmBlade – VPAT

4

CTT-2015 FairNew

mod

el: a

vaila

ble

from

201

7

CHETRA T9

Engine: Cummins QSB6.7–C165Engine power, kW/h.p.–110/150 Operating weight, kg – 17 700Ground pressure, kgf/cm² – 0.607 (0.37)Shoe width – 560 (910) mmBlade –S/SU/AThree tooth ripper / winch

RUSSIA, ROAD BUILDING

BELORUSSIA, “BELKALY”

5

CHETRA T11

Engine: Cummins QSB6.7–C204 Engine power, kW/h.p.–137.5/187 Operating weight, kg – 20 300Ground pressure, kgf/cm² – 0.76 (0.43)Shoe width – 510 (910) mmBlade – S (4,3 m3)/ SU (5,6 m3)/ A (4 m3)Ripper – one or three tooth / winchZIMBABWE, GOLD MINE

SOUTH KOREA, SEAPORT6

CHETRA T15

Engine: Cummins QSC8.3–C245 Engine power, kW/h.p.–180/245 Operating weight, kg – 28 020Ground pressure, kgf/cm² – 0.86 (0.63)Shoe width – 560 (810) mmBlade –S (5,8 m3)/ SU (6,8 m3)/ U (8,5 m3)Ripper – one or three tooth / winch

NEW CALEDONIA, QUARRY

RUSSIA, ROSNEFT

7

CHETRA T20

Engine: Cummins QSM11–C330 Engine power, kW/h.p.–232/315 Operating weight, kg – 33 500Ground pressure, kgf/cm² – 0.86Shoe width – 560 mmBlade – SU (10 m3)/ U (11,6 m3)Ripper – one or three tooth / winch

RUSSIA, GOLD MINE

RUSSIA, GOLD MINE

8

CHETRA T25

Engine: Cummins QSX15–C440 Operating power, kW/h.p.–308/419Operating weight, kg – 45 000Ground pressure, kgf/cm² – 1.2 (0,83)Shoe width – 610 (840) mmBlade – SU (11,9 m3)/ U (13,1 m3)Ripper – one/three tooth

KAZAKHSTAN, IRON ORE MINE

ALGERIA, QUARRY

9

CHETRA T35

Engine: Cummins KTTA19-C520 Operating power, kW/h.p.– 353 (480)Operating weight, kg – 60 500Ground pressure, kgf/cm² – 1.19Shoe width – 650 mmBlade – SU (18,5 m3)/ U (20,6 m3)Ripper – one or three tooth / winch

KAZAKHSTAN, IRON ORE MINE

ZIMBABWE, GOLD MINE

10

CHETRA T40

Engine: Cummins QSK19-C650Operating power, kW/h.p.– 435/590 Operating weight, kg – 64 800Ground pressure, kgf/cm² – 1.46Shoe width – 610 mmBlade – SU (21 m3)Ripper – one/three tooth

RUSSIA, COAL MINE

RUSSIA, GOLD MINE11

Трубоукладчики

TG-122 TG-222 TG-302 TG-511

Lifting capacity, tons

at 1,22 m. distance 26,5 44,2 65,7 107at 2,5 m. distance 12,5 21 31 51

Pipe diameter, mm. (inches) upto 400 (upto 12”)

400-600 (16”- 20”)

600 – 1 000 (24”- 36”)

900 – 1 420(36”- 56”)


12

ЧЕТРА ТГ-122

India, PUNJ LLOYD

CHETRA TG122

Engine: Cummins QSB6,7-C165 Operating power, kW/h.p.– 110/150 Operating weight, kg – 24 500Boom length, m – 7,0 (9,0)Lifting capacity: - at 1.22 m. hook overhang – 26.5 t. - at 2.5 m. hook overhang – 12.5 t.

13

India, PUNJ LLOYD

Russia, Leasingstroymash

ЧЕТРА ТГ-222CHETRA TG222

Engine: Cummins QSC8,3-C245 Operating power, kW/h.p.– 180/245 Operating weight, kg – 32 500Boom length, m – 7,0 (9,0)Lifting capacity: - at 1.22 m. hook overhang – 44.2 t. - at 2.5 m. hook overhang – 21 t.

14

Egypt, PETROJET

Algeria, KANAGHAZ


Engine: Cummins QSM11-C330 Operating power, kW/h.p.– 232/315 Operating weight, kg – 44 000Boom length, m – 7,6 (9,0)Lifting capacity: - at 1.22 m. hook overhang – 65.7 t. - at 2.5 m. hook overhang – 31 t.

15


Engine: Cummins QSX15-C500 Operating power, kW/h.p.– 353/480 Operating weight, kg – 67 275Boom length, m – 8,9Lifting capacity: - at 1.22 m. hook overhang – 107 t. - at 2.5 m. hook overhang – 51 t.

16

Трубоукладчики

EGP-200 EGP-230 EGP-270 EGP-450Operating weight, tons 20 23,6 27 45,7Engine power, kW/HP 110/150 135/184 138/188 232/320Bucket volume, m3 0,8-0,9 1,0-1,25 1,1 – 1,4 2,1


17

CHETRA PK12

Engine: Cummins KTA19-C510 Operating power, kW/h.p.– 353 (480)Operating weight, kg – 52 900Bucket capacity:

- universal – 6,3 m3

- rock – 5,5 m3

- coal – 9 m3

Lifting capacity, kg – 12 000 KAZAKHSTAN, IRON ORE MINE

ZIMBABWE, GOLD MINE18

CHETRA TK25

Engine: Cummins KTA19-C510Operating power, kW/h.p.– 353 (480)Operating weight, kg – 45 600Blade – SU (11,1 m3)

RUSSIA, IRON ORE MINE19

SORTING & CRUSHING EQUIPMENT

20

STATIC & MOBILE TROMMELS (DRUM SCREENS) WITH PRODUCTIVITY FROM 15 TO 1 000 TONS PER HOUR, ORE SIZE FROM 10 TO 500 MM., ELECTRIC/DIESEL DRIVE.

Model Tons per hour

Drum diameter

Drum length

No. of outputs

Screen openings

Hopper volume

M515 350 to 500 1,5 m. 5 m. 4 16 to 250

mm. 30 t.

M615 350 to 500 1,5 m. 6 m. 4 16 to 500

mm. 30 t.

M820 750 2 m. 8 m. 3 or 4 16 to 500 mm. 70 t.

M825 1 000 2,5 m. 8 m. 3 70 to 500 mm. 100 t.

M520R (recycling) 15 2 m. 5 m. 2 - -

M820R (recycling) 50 2 m. 8 m. 2 or 3 - -

Machinery is originated from Ireland

INDUSTRIAL MACHINERYALL-TERRAIN VEHICLE

Model TM-140

Engine YaMZ-236B-2

Engine capacity, kW/HP 184 / 250

Operating weight, kg 15 200Maximal speed, km/hr

- on land - on water

45 4

Lifting capacity, kg 4 000

All-terrain amphibious vehicle can be equipped with the following modules:

- Passenger module- Workshop module- Drilling equipment- Multipurpose module- Living module- Crane-manipulator- Welding module 21

CHETRA SKIDS

MKSM-800, MKSM-1000 skid steer loaders.

ModelMKSM-800 MKSM-

1000

EngineHatz /

Cummins / Kubota

Hatz / Kubota

Engine operating power, kW/h.p. 35,2 / 48 38,9 / 53

Operating weight, kg 3 700 / 3 850 4 000 / 4 350

Lifting capacity, kg 800 1 000

22

SILANTMULTIPURPOSE UNIVERSAL CHASSIS “SILANT” (UNIMOG ANALOG)

23

FORKLIFTS

FORKLIFTS

24

LIFTING CAPACITY: 1,5 – 3,5 TON

LOADING HEIGTH – 3 – 6 M.

ENGINE: ELECTRIC/ DIESEL/ NATURAL GAS

MACHINERY FOR TIMBER INDUSTRY

MACHINERY FOR LOGGING, CHIPPING AND TIMBER TRANSPORTATION

FORESTRY MACHINERY

25

AGRICULTURAL MACHINERY

30, 50 HP SELF-PROPELLED CHASSISVersatile, mass-produced four wheel framed machine. This machine is designed as a universal vehicle for various applications.

30-50-60-85 HP WHEEL TRACTORSAll wheel drive versatile tractor features a modern design and enhanced visibility of the working area. In combination with trailers and implements it is intended for agricultural, loading/unloading and transport applications.

90, 315 HP CRAWLER TRACTORSTo be used for the different types of agricultural activities.

26

COMBINE HARVESTERSCombine harvesters for grain harvesting.

27

30 HP WHEEL TRACTORS

Parameters ValueEngine D120 air cooled 4-stroke 2-cylinder diesel enginePower, kW/h.p. 22/ 30Specific fuel consumption at engine operating power, g/h.p.h 180

Tractor operating weight, kg 2 500Overall dimensions, mm - length - width - height

3180…33201560…16652360…2600

Steering control HydrostaticForward/reverse speeds 8/6Speed range, km/h 1.36…23.86Wheel arrangement 4 х2Agrotechnical clearance (adjustable), mm 385/455/525Rear hitch lifting capacity, kg 600

The tractor can be equipped with CNG gas engine.

CNG variantDiesel variant

28


Parameters ValueEngine D130 air cooled 4-stroke 3-cylinder diesel enginePower, kW/h.p. 33,1/ 45Specific fuel consumption at engine operating power, g/h.p.h 177

Tractor operating weight, kg 2750/2600Overall dimensions, mm - length - width - height

374016602540

Steering control HydrostaticForward/reverse speeds 8/6Speed range, km/h 1.52…23.86Wheel arrangement 4 х 4Agrotechnical clearance (adjustable), mm 510Rear hitch lifting capacity, kg 1200



29


Parameters ValueEngine D130T air cooled 4-stroke 3-cylinder diesel enginePower, kW/h.p. 60Specific fuel consumption at engine operating power, g/h.p.h 169

Tractor operating weight, kg 2900/2750Overall dimensions, mm - length - width - height

374016602540

Steering control HidrostáticoForward/reverse speeds 8/6Speed range, km/h 1.52…23.86Wheel arrangement 4 х 4Agrotechnical clearance (adjustable), mm 510Rear hitch lifting capacity, kg 1200



30


Parameters ValueEngine D145T air cooled 4-stroke 4-cylinder diesel enginePower, kW/h.p. 62,5/ 85Specific fuel consumption at engine operating power, g/h.p.h 180

Tractor operating weight, kg 3950…4050Overall dimensions, mm - length - width - height

390018002600

Steering control HydrostaticForward/reverse speeds 16/8Speed range, km/h 1.52…23.86Wheel arrangement 4 х 4Agrotechnical clearance (adjustable), mm 500Rear hitch lifting capacity, kg 3000



31

30/50 HP DUMPER TRACTORS

Agromash 50SShAgromash 30SSh

Parameters Аgromash 30SSh Agromash 50SSh

Engine D120 air cooled 4-stroke 2-cylinder diesel engine

D130 air cooled 4-stroke 3-cylinder diesel engine

Power, h.p. 30 45

Steering system Hydrostatic

Wheel arrangement 4 х 2 4 х 2

Carrying capacity of the platform, kg Up to 1000 Up to 1500

No cab variant Self-loading variant

32

CRAWLER TRACTORS

Agromash 315TGAgromash 90TG

Agromash 90TG Agromash RuslanDrawbar category 3.0 6.0Engine type Diesel А-41SI-01, 4 stroke, 4 cylinder Diesel CUMMINS QSM11-C330Operating power 95 hp 340 hpCooling system Water cooling Water coolingOperating weight 6220…7250 kg 14 700 kgTrack width 390 mm 600/645Speed range 0,28-11,17 km/h 1,88-30,0 km/hHitch system lifting capacity, min 1 800 kg 7 000 kg

33

COMBINE HARVESTERS

Agromash 4000Agromash 3000

3000 4000 5000Productivity per hour of basic time, t/hr 9 – 10 11,5 - 13,5 16

Cutting width, m 5,0 – 7,0 5,0 – 7,0 6,25 – 7,48Pickup working width, m 3,75 3,75 -Grain tank volume, m3 5 000 6 100 – 7 000 8 100

Engine model AMZ D-442-59I/ YaMZ-236DK9

SISU 74DSBAE/ AMZ D-3045KR

SISU 74 CTA/ AMZ D3065

Engine rated power, kW (h.p.) 132 (180)/ 136 (185) 183,8 (250)/ 169 (230) 250 h.p./ 280 h.p.Fuel tank volume, l 300 400 450Weight, kg 11 010 – 11 680 12 800 – 13 200 15 000

Agromash 5000

34

RAILWAY CARS

Railway cars for Russian gauge (1 520 mm.)

SPARE PARTS & OEM COMPONENTS

35

We produce a full range of spare parts for CHETRA & AGROMASH machinery as well as a wide range of undercarriage components for machinery produced by another companies:

BRAND MODELE COMPONENTS*

CAT Dozers D10, D9, D8, D6, D4 Crawlers, rollersExcavators 345, 330, 322, 317, 315, 240 Crawlers

KOMATSUDozers D375, D355, D275, D155, D85, D65 CrawlersExcavators PC800, PC750, PC650PC 350, PC300, PC290, PC240, PC220, PC150 Crawlers

LIEBHERRDozers PR752/754, PR751, PR734 Crawlers, rollersExcavators R952, R954, R962, R924, R922, R912, R902 Crawlers

New Holland Dozers D180 Crawlers, rollers

VOLVO Excavators EC460, EC420, EC360, EC240, EC230, EC210, EC180 Crawlers

JCB JS260, JS240, JS220, JS200 Crawlers

HITACHIExcavators EX700, EX750, EX400, EX300, ZX270-350, EX220, ZX230-250, EX165, EX100

Crawlers

HYUNDAI Excavators R450, R420, R360, R320, R290, R250, R235, R200 Crawlers

SHANTUI Dozers SD32, SD23, SD22, SD16 Crawlers, rollers*-Please contact our Spare parts Department for more information.

AFTERSALES SUPPORT

36

Aftersales support of CHETRA machinery in Russia and abroad is provided by “Industrial Machines Service” LLC – specialized technical cervices company of Concern “Tractor Plants”.

Services provided by the company:- Repairs of CHETRA industrial, forestry and municipal machinery within warranty period

and after its expiration.- Periodical maintenance of CHETRA machinery under maintenance contracts.- Original spare parts supply.- CUMMINS/ YaMZ engines repairs and periodical maintenance. - Operators and maintenance staff training.- Technical support and consultations provided through Call-center.

SPARE PARTS

37

Each piece of machinery is delivered with a standard spare parts and tools kit.

Upon customer’s request the machinery can be delivered with extended spare parts kit for 1 000, 2 000, 4 000 or 6 000 motorhours.

The machinery has standard components manufactured by such world leading companies as CUMMINS (engines and Fleetguard filters), Bosh-Rexroth / David Brown (Hydraulics), etc. which can be acquired at the local dealer in the country.

If a spare part is not available in the customer’s country, it can be urgently sent from manufacturer’s warehouse to minimize the down time.

The spare parts supply is performed by a specialized company, being a part of Concern “Tractor Plants” – “CHETRA Spare Parts & Components” (CHETRA-SPC).

A customer or service partner can be registered at our website to get access to online 3D spare parts catalogs which will simplify the procedure of spare parts purchase

CHETRA ONLINE

38

On the customer’s request the machinery can be equipped by the system of remote control CHETRA-Online

GSM / GPRS

Industrial Machines Service LLC

Local service partner

Data about machinery

position

Data about position +

data from on-board sensors

Data transfer by Internet

Service provider

Information about machinery position and

main parameters

The system allows to have a real-time information about the machinery position and main parameters: working hours, fuel consumption, engine temperature, oil temperature, pressure, etc. It allows the service companies to control the machinery state and contact the customer in case of critical situations.

GLONASS/GPS positioning

system

ABOUT COMPANY

Concern “Tractor Plants” (CTP) is one of the largest integrators of scientific, technological, industrial and financial resources in Russian machine building industry.

Concern “Tractor Plants”(Machinery and Industrial Group N.V.)

Nowadays activities of the Concern cover the complete life cycle of machinery from design to after-sales service.

Today Concern Tractor Plants is a full liner company offering to potential customers complex solutions in construction, mining, agricultural and timber industries.

39

The history of CTP starts in 1998 when Mr. Mikhail Bolotin, the founder and actual President of the group purchased his first stake in “Promtractor” JSC (manufacturer of CHETRA crawler bulldozers and pipelayers).

Since that day the company has made a long way in its development and came to the leading position in this industry in Russia.

MANUFACTURING SITES

Petrozavodsk

Kurgan

Barnaul

Silvatec Skovmaskiner A/S (Denmark)

Luitpoldhutte(Germany)

Altay motor works

Promtractor-Vagon

Volgograd

Cheboksary Kanash

Moscow

Kurganmashzavod

Zauralye smithy-casting works

Tractor plant Onejskiy

VMK Volgograd tractor plants

Corporate Office

Promtractor-Promlit

Promtractor

Cheboksary Agregate Works

Machinery & Industrial Group NV (Netherlands)

Vladimir

Industrial machinery building

Agricultural machinery building

Engines, spare parts and ОЕМ-sets

Special purpose machinery Rail road works

RUSSIA

EUROPE

Vogel & Noot (Austria)

Vladimir Tractor Plant

40

Concern Tractor Plants unites 17 manufacturing sites with more then 20 thousand employees in Russia and Europe + 7 companies specialized in design, sales and aftersales services.

SAREX

Saransk

SALES WORLDWIDE

41CTP sales geography covers all the world from America to Oceania.

Australia

South Corea

Cuba

Venezuela

USA

Zimbabwe

Belorussia

Bulgaria

Algeria EgyptIndia

KazakhstanUkraine

IranSyria

AfghanistanKoweit

Serbia

IraqUAE

Indonesia New Caledonia

RUSSIAN FEDERATION

Nikaragua

THANK YOU FOR ATTENTION!

OUR CONTACT DETAILS:

Russian Federation, 428000, Cheboksary, Mira av., 1

Phone/fax: +7 8352 63-53-64, 63-24-63, 30-42-59

E-mail: [email protected], [email protected]

Website: www.tplants-exports.com

https://www.facebook.com/MIGNV?ref=hl

http://www.youtube.com/user/TractorPlants https://twitter.com/TractorPlants

http://vk.com/public64945073

mailto:[email protected]

mailto:[email protected]

http://www.tplants-exports.com/

https://www.facebook.com/MIGNV?ref=hl

http://www.youtube.com/user/TractorPlants

http://www.youtube.com/user/TractorPlants

https://twitter.com/TractorPlants

https://twitter.com/TractorPlants



CHETRA Machinery for Mining & Construction

Presentations & Public Speaking

Transcript of CHETRA Machinery for Mining & Construction