Chesterton Product Data Sheet, · 2019. 2. 20. · terton 715(E) Spra˜ ex Gold forms a discrete...
1
Technical Data reflects results of laboratory tests and is intended to indicate general characteristics only. Since many actual application circumstances are beyond Chesterton's knowledge and/or control, the product user must determine the suitability of the products it intends to use for its particular purpose and assume all risks and liabilities in connection therewith. CHESTERTON DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 715 SPRAFLEX® GOLD PRODUCT DATA SHEET APPLICATION AREAS • Chain Drives/Sprockets • Open Gears • Hoists/Cranes • Wire Ropes/Cables • Conveyors • Printing Presses KEY FEATURES AND BENEFITS • Clean, clear, solvent-free • Corrosion resistant • Self-adhering lubrication • NSF Registered H2 Registration number - 157855 (bulk) and 157854 (aerosol) • Non-drip • Water resistant PACKAGING Aerosol 5L 20L 208L DIRECTIONS Apply directly to surface to be lubricated with squirt oiler or oil can with extended spout. Convenient aerosol package is also available. DESCRIPTION Chesterton 715(E) Spraflex® Gold is light colored, clear and 100% active. 715(E) Spraflex Gold can be used in any applica- tion requiring a polymeric, retractable film to cushion, quiet and protect. It will not fling off or extrude like ordinary oils and greases. Chesterton 715(E) Spraflex Gold is especially effective for surface lubricant applications where staining or soiling of equipment or process material is a concern. The possibility of marring products with the black asphaltic- like raw materials used in older technology surface lubricants is totally eliminated. Noise caused by metal to metal contact is reduced with every revolution as Spraflex Gold’s self-replenishing action cushions and quiets. Areas of tooth contact on gears are continu- ously lubricated with it's flexible film. Ches- terton 715(E) Spraflex Gold forms a discrete wear shield which stays in place even under the most extreme pressures. The useful life of wire ropes can be quantifi- ably extended as wire to wire contact is cush- ioned. Anti-corrosion action and resistance to water mean regular applications of Spraflex Gold will provide protection to equipment and machinery exposed to the weather or to mois- ture and industrial fumes indoors. Before using this product, please refer to Safety Data Sheet (SDS). Chesterton International GmbH Am Lenzenfleck 23, DE-85737 Ismaning, Germany Tel +49-5223-96276-0 www.chesterton.com [email protected] © 2019 A.W. Chesterton Company ® Registered trademark owned and licensed by A.W. Chesterton Company in USA and other countries, unless otherwise noted. FORM NO. 715(E) SPRAFLEX® GOLD - EN 715(E) - SPRAFLEX® GOLD - ENGLISH REV. 02/2019 Typical Physical Properties Appearance Amber honey like liquid Flash Point C.O.C. (ASTM D 92, ISO 2592) 138°C Specific Gravity 20°C (68°F) 0.89 Odor Mild Texture Tacky, viscous Viscosity, SSU @ 99°C (210°F) 30,000 cps Four Ball Wear Test (ASTM D 2596, DIN 51 350/4) Scar Diameter Load Wear Index Weld Load 0.44 mm 52.1 250 kg Solubility in water None Density 0,89 kg/l
Transcript of Chesterton Product Data Sheet, · 2019. 2. 20. · terton 715(E) Spra˜ ex Gold forms a discrete...
Technical Data refl ects results of laboratory tests and is intended to indicate general characteristics only. Since many actual application circumstances are beyond Chesterton's knowledge and/or control, the product user must determine the suitability of the products it intends to use for its particular purpose and assume all risks and liabilities in connection therewith. CHESTERTON DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
715 SPRAFLEX® GOLD
PRODUCT DATA SHEET
APPLICATION AREAS
• Chain Drives/Sprockets• Open Gears
• Hoists/Cranes• Wire Ropes/Cables
• Conveyors• Printing Presses
KEY FEATURES AND BENEFITS
• Clean, clear, solvent-free
• Corrosion resistant
• Self-adhering lubrication
• NSF Registered H2 Registration number - 157855 (bulk) and 157854 (aerosol)
• Non-drip
• Water resistantPACKAGING
Aerosol5L20L208L
DIRECTIONS
Apply directly to surface to be lubricated with squirt oiler or oil can with extended spout. Convenient aerosol package is also available.
DESCRIPTION
Chesterton 715(E) Spra� ex® Gold is light colored, clear and 100% active. 715(E) Spra� ex Gold can be used in any applica-tion requiring a polymeric, retractable � lm to cushion, quiet and protect. It will not � ing off or extrude like ordinary oils and greases. Chesterton 715(E) Spra� ex Gold is especially effective for surface lubricant applications where staining or soiling of equipment or process material is a concern. The possibility of marring products with the black asphaltic-like raw materials used in older technology surface lubricants is totally eliminated. Noise caused by metal to metal contact is reduced with every revolution as Spra� ex Gold’s self-replenishing action cushions and quiets. Areas of tooth contact on gears are continu-ously lubricated with it's � exible � lm. Ches-terton 715(E) Spra� ex Gold forms a discrete wear shield which stays in place even under the most extreme pressures.
The useful life of wire ropes can be quanti� -ably extended as wire to wire contact is cush-ioned. Anti-corrosion action and resistance to water mean regular applications of Spra� ex Gold will provide protection to equipment and machinery exposed to the weather or to mois-ture and industrial fumes indoors.
Before using this product, please refer to Safety Data Sheet (SDS).
Chesterton International GmbHAm Lenzenfleck 23, DE-85737 Ismaning, GermanyTel +49-5223-96276-0www.chesterton.com [email protected]© 2019 A.W. Chesterton Company ® Registered trademark owned and licensed by
A.W. Chesterton Company in USA and other countries, unless otherwise noted. FORM NO. 715(E) SPRAFLEX® GOLD - EN 715(E) - SPRAFLEX® GOLD - ENGLISH REV. 02/2019
Typical Physical PropertiesAppearance Amber honey like liquid
Flash Point C.O.C. (ASTM D 92, ISO 2592) 138°C
Specifi c Gravity 20°C (68°F) 0.89
Odor Mild
Texture Tacky, viscous
Viscosity, SSU @ 99°C (210°F) 30,000 cps
Four Ball Wear Test (ASTM D 2596, DIN 51 350/4) Scar Diameter Load Wear Index Weld Load
0.44 mm52.1
250 kg
Solubility in water None
Density 0,89 kg/l
